MOXA-CN2600-MIB
AI MIB Summary
The MOXA-CN2600-MIB module enables SNMP-based monitoring and management of Moxa CN2600 series terminal servers, specifically tracking serial port status, session states, and hardware health metrics such as temperature and power supply conditions.
The MIB module for Moxa Terminal Server CN2600 series specific information.
Main OID:
cn2600.1.3.6.1.4.1.8691.2.11
351
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
351 total| Object Name |
|---|
moxa OBJECT IDENTIFIER .1.3.6.1.4.1.8691 |
nport OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2 |
cn2600The MIB module for Moxa Terminal Server CN2600 series specific information. MODULE-IDENTITY .1.3.6.1.4.1.8691.2.11 |
swMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1 |
overview OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.1 |
modelNameThe model name of the CN2600.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.1.1 |
serialNumberThe serial number of the CN2600. Every Terminal Server CN2600
series is assigned a unique serial
number before it is shipped.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.1.2 |
firmwareVersionThe version of the firmware currently running on the CN2600.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.1.3 |
viewLan1IpAddressThe IP address of the CN2600's LAN1 interface.ro IpAddress .1.3.6.1.4.1.8691.2.11.1.1.4 |
viewLan1MacAddressThe MAC address of the CN2600's LAN1 interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.1.5 |
viewLan1SpeedThe current speed and link status of the CN2600's built-in
LAN1 port. The possible values are 'No link',
'10M/Link,' or '100M/Link.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.1.6 |
viewLan2IpAddressThe IP address of the CN2600's LAN2 interface.ro IpAddress .1.3.6.1.4.1.8691.2.11.1.1.7 |
viewLan2MacAddressThe MAC address of the CN2600's LAN2 interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.1.8 |
viewLan2SpeedThe current speed and link status of the CN2600's built-in
LAN2 port. The possible values are 'No link',
'10M/Link,' or '100M/Link.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.1.9 |
upTimeThe time (in human-readable notation) since the
system was was last re-initialized.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.1.10 |
power1StatusThe on/off status of power 1ro Enumeration .1.3.6.1.4.1.8691.2.11.1.1.11 |
power2StatusThe on/off status of power 2 for 2AC modelro Enumeration .1.3.6.1.4.1.8691.2.11.1.1.12 |
basicSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.2 |
serverSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.2.1 |
serverNameA text string used to identify the CN2600.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.2.1.1 |
serverLocationA text string used to identify the location of the CN2600. This
option is useful for specifying the location or
application of different CN2600.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.2.1.2 |
timeSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.2.2 |
timeZoneThe time-zone index of the CN2600.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.2.2.1 |
localTimeThe system time in seconds since 1970/1/1.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.2.2.2 |
timeServerThe Terminal Server CN2600 series uses SNTP
(RFC-1769) for auto time calibration.
Input the correct 'Time server' IP address or domain
name. Once the Terminal Server CN2600 series is
configured with the correct Time server address, it
will request time information from the Time server
every 10 minutes.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.2.2.3 |
networkSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.3 |
lan1IpConfigurationThe IP configuration mode of the CN2600. You can
choose from four possible IP configuration modes:
Static, DHCP, DHCP/BOOTP, BOOTP, and PPPoE.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.3.1 |
lan1IpAddressAn IP address is a number assigned to a network
device (such as a computer) as a permanent address
on the network. Computers use the IP address to
identify and talk to each other over the network.
Choose a proper IP address that is unique and valid
in your network environment.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.3.2 |
lan1NetMaskA subnet mask represents all of the network hosts
at one geographic location, in one building, or on
the same local area network. When a packet is sent
out over the network, the Terminal Server CN2600 series device
server will use the subnet mask to check whether the
TCP/IP host specified in the packet is on
the local network segment. If the address is on the
same network segment as the Terminal Server CN2600 series device
server, a connection is established directly from
the Terminal Server CN2600 series device server. Otherwise, the
connection is established through the given default
gateway.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.3.3 |
lan1DefaultGatewayA gateway is a network computer that acts as an
entrance to another network. Usually, the computers
that control traffic within the network or at the
local Internet service provider are gateway nodes.
The Terminal Server CN2600 series needs to know
the IP address of the default gateway computer in
order to communicate with the hosts outside the
local network environment. For correct gateway IP
address information, consult with the network
administrator.ro IpAddress .1.3.6.1.4.1.8691.2.11.1.3.4 |
lan1SpeedIEEE802.3 Ethernet supports the auto negotiation
speed function to get suitable speeds. However, for
connecting to some switches/hubs, the communication
speed must be fixed at 100 Mbps or 10 Mbps. Users can
use this function to fix the communication speed.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.3.5 |
lan1PppoeUserAccountThe user account used by the CN2600 to access
the Internet using PPPoE. For dynamic broad band
networks such as xDSL or Cable Modem, users must
enter the username and password that they
received from their ISP to establish a network
connection.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.3.6 |
lan1PppoePasswordThe password used by the CN2600 to access the Internet
using PPPoE. For dynamic broad band networks such as
xDSL or Cable Modem, users must enter the
username and password that they received from their
ISP to establish a network connection.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.3.7 |
lan2IpConfigurationThe IP configuration mode of the CN2600. You can
choose from four possible IP configuration modes:
Static, DHCP, DHCP/BOOTP, BOOTP, and PPPoE.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.3.8 |
lan2IpAddressAn IP address is a number assigned to a network
device (such as a computer) as a permanent address
on the network. Computers use the IP address to
identify and talk to each other over the network.
Choose a proper IP address that is unique and valid
in your network environment.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.3.9 |
lan2NetMaskA subnet mask represents all of the network hosts
at one geographic location, in one building, or on
the same local area network. When a packet is sent
out over the network, the Terminal Server CN2600 series device
server will use the subnet mask to check whether the
TCP/IP host specified in the packet is on
the local network segment. If the address is on the
same network segment as the Terminal Server CN2600 series device
server, a connection is established directly from
the Terminal Server CN2600 series device server. Otherwise, the
connection is established through the given default
gateway.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.3.10 |
lan2DefaultGatewayA gateway is a network computer that acts as an
entrance to another network. Usually, the computers
that control traffic within the network or at the
local Internet service provider are gateway nodes.
The Terminal Server CN2600 series needs to know
the IP address of the default gateway computer in
order to communicate with the hosts outside the
local network environment. For correct gateway IP
address information, consult with the network
administrator.ro IpAddress .1.3.6.1.4.1.8691.2.11.1.3.11 |
lan2SpeedIEEE802.3 Ethernet supports the auto negotiation
speed function to get suitable speeds. However, for
connecting to some switches/hubs, the communication
speed must be fixed at 100 Mbps or 10 Mbps. Users can
use this function to fix the communication speed.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.3.12 |
lan2PppoeUserAccountThe user account used by the CN2600 to access
the Internet using PPPoE. For dynamic broad band
networks such as xDSL or Cable Modem, users must
enter the username and password that they
received from their ISP to establish a network
connection.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.3.13 |
lan2PppoePasswordThe password used by the CN2600 to access the Internet
using PPPoE. For dynamic broad band networks such as
xDSL or Cable Modem, users must enter the
username and password that they received from their
ISP to establish a network connection.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.3.14 |
dnsServer1IpAddrThe first DNS server address. When the user wants
to visit a particular website, the computer asks a
Domain Name System (DNS) server for the websites
correct IP address, and then the computer uses the
response to connect to the web server. DNS is the
way that Internet domain names are identified and
translated into IP addresses. A domain name is an
alphanumeric name, such as moxa.com, that it is
usually easier to remember. A DNS server is a host
that translates this kind of text-based domain name
into the numeric IP address used to establish a
TCP/IP connection.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.3.15 |
dnsServer2IpAddrThe second DNS server address. When the user wants
to visit a particular website, the computer asks a
Domain Name System (DNS) server for the websites
correct IP address, and then the computer uses the
response to connect to the web server. DNS is the
way that Internet domain names are identified and
translated into IP addresses. A domain name is an
alphanumeric name, such as moxa.com, that it is
usually easier to remember. A DNS server is a host
that translates this kind of text-based domain name
into the numeric IP address used to establish a
TCP/IP connection.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.3.16 |
winsFunctionEnable or disable the WINS server.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.3.17 |
winsServerIf a WINS Server is connected to the network, use
this field to record the WINS Servers IP address.
TCP/IP uses IP addresses to identify hosts, but
users often use symbolic names, such as computer
names. The WINS Server, which uses NetBIOS over
TCP/IP, contains a dynamic database to map computer
names to IP addresses.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.3.18 |
routingProtocolThe routing protocol used by the CN2600. This value
could be none, RIP-1, or RIP-2.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.3.19 |
gratuitousArpEnable or disable the gratuitous ARP function. For some
applications, users need the Terminal Server CN2600 series
to send broadcast packets to update
the ARP table on the server. If the customer enables
this function and sets the send period, the Terminal Server CN2600
series will send broadcast
packets periodically.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.3.20 |
gratuitousArpSendPeriodThe send period of the gratuitous ARP function.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.3.21 |
portSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4 |
opModeSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1 |
opMode OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.1 |
opModePortTableThe serial ports' operation mode table. SEQUENCE OF OpModePortEntry .1.3.6.1.4.1.8691.2.11.1.4.1.1.1 |
opModePortEntryThe serial port's operation mode entry. OpModePortEntry .1.3.6.1.4.1.8691.2.11.1.4.1.1.1.1 |
portIndexThe serial port index.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.1.1.1.1 |
portApplicationThe application of the serial port.
Note that changing this setting may also change the
operation mode.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.1.1.1.2 |
portModeThe operation mode of the serial port. Note that
changing this setting may also change the application.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.1.1.1.3 |
application OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2 |
deviceControl OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2.1 |
deviceControlTableThe Device Control application table. SEQUENCE OF DeviceControlEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1 |
deviceControlEntryThe Device Control application entry. DeviceControlEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1 |
deviceControlTcpAliveCheckThe TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP activity for the given time. After the
connection is closed, the Terminal Server CN2600 series device
server starts listening for another Real COM driver
Connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.1 |
deviceControlMaxConnectionMax connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the Terminal Server CN2600
series device server, and the Real COM driver on that
host will have full control over the port.
Max. connection = 1:
Allows only a single hosts Real COM driver to open
the specific Terminal Server CN2600 series device servers
serial port.
Max connection = 2 to 8:
Allows 2 to 8 hosts Real COM drivers to open the
specific Terminal Server CN2600 series device servers serial
port, at the same time. When multiple hosts Real
COM drivers open the serial port at the same time,
the COM driver only provides a pure data tunnel
without control ability. The serial port parameter
will use the firmware settings instead of getting
the settings from your application program (AP).rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.2 |
deviceControlIgnoreJammedIpPreviously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been transmitted successfully
before transmitting the second group of data to all
hosts. Currently, if you select Yes for 'Ignore
jammed IP,' the host that is not responding will be
ignored, but the data will still be transmitted to
the other hosts.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.3 |
deviceControlAllowDriverControlIf Max connection is greater than 1, CN2600 will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the Terminal Server CN2600 series may get
configuration changes from multiple hosts, the most
recent command received will take precedence.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.4 |
deviceControlConnectionDownRTSFor some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'always low,' RTS will change its state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.5 |
deviceControlConnectionDownDTRFor some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change its state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.6 |
socket OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2 |
socketTableThe Socket application table. SEQUENCE OF SocketEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1 |
socketEntryThe Socket application entry. SocketEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1 |
socketTcpAliveCheckThe TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP activity for the given time. After the
connection is closed, the Terminal Server CN2600 series device
server starts listening for another connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.1 |
socketInactivityTime0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. After
the connection is closed, the Terminal Server CN2600 series
starts listening for another
TCP connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.2 |
socketMaxConnectionMax connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the Terminal Server CN2600
series device server.
Max. connection 1:
Allows only a single host to open
the specific Terminal Server CN2600 series device servers
serial port.
Max connection 2 to 8:
Allows 2 to 8 hosts to open the
specific Terminal Server CN2600 series device servers serial
port at the same time.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.3 |
socketIgnoreJammedIpPreviously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been transmitted successfully
before transmitting the second group of data to all
hosts. Currently, if you select Yes for 'Ignore
jammed IP,' the host that is not responding will be
ignored, but the data will still be transmitted to
the other hosts.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.4 |
socketAllowDriverControlIf Max connection is greater than 1, CN2600 will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the Terminal Server CN2600 series may get
configuration changes from multiple hosts, the most
recent command received will take precedence.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.5 |
socketTcpPortThe 'TCP port' is the TCP port that the Terminal Server CN2600
series uses to listen to
connections, and that other devices must use to
contact the Terminal Server CN2600 series device server.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.6 |
socketCmdPortThe 'Command port' is a TCP port used to listen for
IP-Serial Lib commands from the host. In order to
prevent a TCP port conflict with other applications,
the user can set the Command port to another port
if needed. IP-Serial Lib will automatically check
the Command Port on the Terminal Server CN2600 series device
server to avoid the need for the user to configure
the program.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.7 |
socketTcpServerConnectionDownRTSFor some applications, serial devices must obtain
the Ethernet link status from the RTS signal sent by the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' RTS will change the state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.8 |
socketTcpServerConnectionDownDTRFor some applications, serial devices must obtain
the Ethernet link status from the DTR signal sent by the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change the state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.9 |
socketTcpClientDestinationAddress1The Terminal Server CN2600 series can
connect actively to a remote host that
has this IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.10 |
socketTcpClientDestinationPort1The Terminal Server CN2600 series can
connect actively to a remote host that has this
TCP port number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.11 |
socketTcpClientDestinationAddress2The Terminal Server CN2600 series can
connect actively to a remote host that has this IP
address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.12 |
socketTcpClientDestinationPort2The Terminal Server CN2600 series can
connect actively to a remote host that
has this TCP port number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.13 |
socketTcpClientDestinationAddress3The Terminal Server CN2600 series can
connect actively to a remote host that
has this IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.14 |
socketTcpClientDestinationPort3The Terminal Server CN2600 series can
connect actively to a remote host that
has this port number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.15 |
socketTcpClientDestinationAddress4The Terminal Server CN2600 series can
connect actively to a remote host that
has this IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.16 |
socketTcpClientDestinationPort4The Terminal Server CN2600 series can
connect actively to a remote host that
has this port number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.17 |
socketTcpClientDesignatedLocalPort1The local TCP port used to connect actively to the
remote host.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.18 |
socketTcpClientDesignatedLocalPort2The local TCP port used to connect actively to the
remote host.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.19 |
socketTcpClientDesignatedLocalPort3The local TCP port used to connect actively to the
remote host.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.20 |
socketTcpClientDesignatedLocalPort4The local TCP port used to connect actively to the
remote host.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.21 |
socketTcpClientConnectionControlEvents that cause the TCP client to drop the
connection.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.22 |
socketUdpDestinationAddress1BeginThe Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress1End.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.23 |
socketUdpDestinationAddress1EndThe Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress1Begin and this parameter.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.24 |
socketUdpDestinationPort1The Terminal Server CN2600 series can actively send
UDP packets to remote hosts that have this port
number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.25 |
socketUdpDestinationAddress2BeginThe Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress2End.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.26 |
socketUdpDestinationAddress2EndThe Terminal Server CN2600 series can actively send
UDP packets to the remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress2Begin and this parameter.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.27 |
socketUdpDestinationPort2The Terminal Server CN2600 series can actively send
UDP packets to the remote hosts that have this
TCP port number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.28 |
socketUdpDestinationAddress3BeginThe Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress3End.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.29 |
socketUdpDestinationAddress3EndThe Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress3Begin and this parameter.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.30 |
socketUdpDestinationPort3The Terminal Server CN2600 series can actively send
UDP packets to remote hosts that have this
TCP port number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.31 |
socketUdpDestinationAddress4BeginThe Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress4End.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.32 |
socketUdpDestinationAddress4EndThe Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress4Begin and this parameter.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.33 |
socketUdpDestinationPort4The Terminal Server CN2600 series can actively send
UDP packets to remote hosts that have this
TCP port number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.34 |
socketUdpLocalListenPortThe UDP port that the Terminal Server CN2600 series device
server listens to and that other devices must use
to contact the Terminal Server CN2600 series device server.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.35 |
redundantCom OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2.3 |
redundantComTableThe Redundant COM table. SEQUENCE OF RedundantComEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1 |
redundantComEntryThe Redundant COM entry. RedundantComEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1 |
redundantComMaxConnectionMax connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the Terminal Server CN2600
series device server, and the Redundant COM driver on that
host will have full control over the port.
Max. connection = 1:
Allows only a single hosts Redundant COM driver to open
the specific Terminal Server CN2600 series device servers
serial port.
Max connection = 2 to 4:
Allows 2 to 4 hosts Redundant COM drivers to open the
specific Terminal Server CN2600 series device servers serial
port, at the same time. When multiple hosts Redundant
COM drivers open the serial port at the same time,
the COM driver only provides a pure data tunnel
without control ability. The serial port parameter
will use the firmware settings instead of getting
the settings from your application program (AP).rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.1 |
redundantComIgnoreJammedIpPreviously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been transmitted successfully
before transmitting the second group of data to all
hosts. Currently, if you select Yes for 'Ignore
jammed IP,' the host that is not responding will be
ignored, but the data will still be transmitted to
the other hosts.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.2 |
redundantComAllowDriverControlIf Max connection is greater than 1, CN2600 will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the Terminal Server CN2600 series may get
configuration changes from multiple hosts, the most
recent command received will take precedence.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.3 |
redundantComConnectionDownRTSFor some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'always low,' RTS will change its state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.4 |
redundantComConnectionDownDTRFor some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change its state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.5 |
drdas OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2.4 |
drdasTableThe DRDAS table. SEQUENCE OF DrdasEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1 |
drdasEntryThe DRDAS entry. DrdasEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1 |
drdasTcpAliveCheckThe TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP activity for the given time. After the
connection is closed, the Terminal Server CN2600 series device
server starts listening for another Real COM driver
Connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.1 |
drdasInactivityTime0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. After
the connection is closed, the Terminal Server CN2600 series
starts listening for another
TCP connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.2 |
drdasIgnoreJammedIpPreviously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been transmitted successfully
before transmitting the second group of data to all
hosts. Currently, if you select Yes for 'Ignore
jammed IP,' the host that is not responding will be
ignored, but the data will still be transmitted to
the other hosts.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.3 |
drdasPrimaryIpAddressDRDAS Primary IP Address.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.4 |
drdasBackup1IpAddressDRDAS Backup 1 IP Address.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.5 |
drdasBackup2IpAddressDRDAS Backup 2 IP Address.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.6 |
drdasBackup3IpAddressDRDAS Backup 3 IP Address.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.7 |
drdasTcpPortThe 'TCP port' is the TCP port that the
Terminal Server CN2600 series uses to listen to
connections, and that other devices must use to
contact the Terminal Server CN2600 series device server.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.8 |
drdasCmdPortThe 'Command port' is a TCP port used to listen for
IP-Serial Lib commands from the host. In order to
prevent a TCP port conflict with other applications,
the user can set the Command port to another port
if needed. IP-Serial Lib will automatically check
the Command Port on the Terminal Server CN2600 series device
server to avoid the need for the user to configure
the program.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.9 |
drdasConnectionDownRTSFor some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'always low,' RTS will change its state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.10 |
drdasConnectionDownDTRFor some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change its state to
low if the Ethernet link is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.11 |
terminal OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2.5 |
terminalTableThe Terminal Application table. SEQUENCE OF TerminalEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1 |
terminalEntryThe Terminal Application entry. TerminalEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1 |
terminalTcpAliveCheckThe TCP alive check time.
0 min: TCP connection will not be closed if the
TCP connection becomes idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP activity for the given time. After the
connection is closed, the Terminal Server CN2600 series device
server starts listening for another
connection from another host.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.1 |
terminalInactivityTime0 min: TCP connection will not be closed if the
serial line becomes idle.
0-99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. After
the connection is closed, the Terminal Server CN2600 series
starts listening for another host's
TCP connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.2 |
terminalAutoLinkProtocolIf Auto-Link protocol is set to 'None,' the
Terminal Server CN2600 series will not connect to the
host automatically. If Auto-Link protocol is set to
'Telnet,' the Terminal Server CN2600 series will
connect to the host automatically using Telnet. If
Auto-Link protocol is set to 'Rlogin,' the
Terminal Server CN2600 series will connect to the host
automatically using rlogin.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.3 |
terminalPrimaryHostAddressIf specified, designates a 'permanent' host to
which the terminal will always be connected.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.4 |
terminalSecondHostAddressIf specified, designates a 'permanent' host to
which the terminal will always be connected.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.5 |
terminalTelnetTcpPortBy default, the Telnet TCP port number is set to
23, which is the default TCP port number for Telnet.
If you need to telnet to this Terminal Server CN2600 series
device server's serial port, set the Telnet TCP port
to a different number.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.6 |
terminalTypeDefines the terminal type for outgoing connections.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.7 |
terminalMaxSessionsConfigure the max. number of sessions.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.8 |
terminalChangeSessionDefines the control character used to change the terminal
session.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.9 |
terminalQuitDefines the control character used to quit a terminal
session.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.10 |
terminalBreakDefines the control character used to send a Telnet
BREAK message.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.11 |
terminalInterruptDefines the control character used to send a Telnet
INTERRUPT message.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.12 |
terminalAuthenticationTypeThe terminal authentication type.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.13 |
terminalAutoLoginPromptThe prompt string for the automatic login ID. When the
Terminal Server CN2600 series receives this string
from a remote telnet/rlogin server, it will
automatically reply with the user ID.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.14 |
terminalPasswordPromptThe prompt string for the automatic login password.
When the Terminal Server CN2600 series receives this
string from a remote telnet/rlogin server, it will
automatically reply with the user password.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.15 |
terminalLoginUserNameTerminal login ID for automatic login.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.16 |
terminalLoginPasswordTerminal login password for automatic login.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.17 |
reverseTerminal OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2.6 |
reverseTerminalTableThe Reverse Terminal Application table. SEQUENCE OF ReverseTerminalEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1 |
reverseTerminalEntryThe Reverse Terminal Application entry. ReverseTerminalEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1 |
reverseTerminalTcpAliveCheckThe TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection becomes idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP activity for the given time. After the
connection is closed, the Terminal Server CN2600 series device
server starts listening for another connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.1 |
reverseTerminalInactivityTime0 min: TCP connection will not be closed if the
serial line becomes idle.
0-99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. After
the connection is closed, the Terminal Server CN2600 series
starts listening for another
TCP connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.2 |
reverseTerminalTcpPortEach of the Terminal Server CN2600 series device server's serial
ports are mapped to a TCP port.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.3 |
reverseTerminalAuthenticationTypeThe reverse terminal authentication type.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.4 |
reverseTerminalMapKeysIf data received through Terminal Server CN2600 series device
server's Ethernet port is sent using the 'enter'
command, the data will be transmitted out through
the serial port with an added
1. 'carriage return + line feed' if you select the
'cr-lf' option (i.e., the cursor will jump to the
next line, and return to the first character of the
line)
2. 'carriage return' if you select the 'cr' option
(i.e., the cursor will return to the first character
of the line
3. 'line feed' if you select the 'lf' option. (i.e.,
the cursor will jump to the next line, but not move
horizontally)rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.5 |
dial OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.2.7 |
dialTableThe Dial In/Out table. SEQUENCE OF DialEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1 |
dialEntryThe Dial In/Out entry. DialEntry .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1 |
dialTERMBINModeSelect Yes to enable a Binary Terminal connection.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.1 |
dialPPPDModeSelect Yes to enable a PPPD connection.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.2 |
dialSLIPDModeSelect Yes to enable a SLIPD Terminal connection.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.3 |
dialAuthTypeThe dial in/out authentication type.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.4 |
dialDisconnectByIf this field is set to 'dcd-off,' the connection
will be disconnected when the DCD signal is off.
If this field is set to 'dsr-off,' the connection
will be disconnected when the DSR signal is off.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.5 |
dialDestinationIpAddressDestination IP address is the IP address of the
remote dial-in/dial-out server.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.6 |
dialSourceIpAddressSource IP address is IP address of this serial
port. The Terminal Server CN2600 series will
automatically assign an IP address for the port.
We recommend leaving this field blank.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.7 |
dialIpNetmaskThe IP netmask used for dial-in/dial-out networks
(PPP or SLIP).rw IpAddress .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.8 |
dialTcpIpCompressionDepends on whether the remote user's application
requests compression.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.9 |
dialInactivityTime0 ms: TCP connection will not be closed if the
serial line becomes idle.
1-65535 ms: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. After
the connection is closed, the Terminal Server CN2600 series
starts listening for another
TCP connection.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.10 |
dialLinkQualityReportChoose YES if you are using software to collect Link quality
information.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.11 |
dialOutgoingPAPIDDial-out user ID account.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.12 |
dialPAPPasswordDial-out user password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.13 |
dialIncomingPAPCheckThe Dial in/out incoming PAP check type.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.14 |
dataPacking OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.1.3 |
dataPackingPortTableThe Data Packing table. SEQUENCE OF DataPackingPortEntry .1.3.6.1.4.1.8691.2.11.1.4.1.3.1 |
dataPackingPortEntryThe Data Packing entry. DataPackingPortEntry .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1 |
portPacketLengthIf the value is 0, the Delimiter Process will be
used, regardless of the length of the data
packet. If the data length (in bytes) matches the
configured value, the data will be forced out. The
data length can be configured from 0 to 1024 bytes.
Set to 0 if you do not need to limit the length.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.1 |
portDelimiter1EnableEnable the first delimiter character.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.2 |
portDelimiter1The first delimiter character, in hex decimal.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.3 |
portDelimiter2EnableEnable the second delimiter character.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.4 |
portDelimiter2The second delimiter character, in hex decimal.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.5 |
portDelimiterProcess'delimiterAddOne' or 'delimiterAddTwo': The data
will be transmitted when an additional byte (for
'delimiterAddOne'), or an additional 2 bytes (for
'delimiterAddTwo') of data is received after
receiving the Delimiter.
'stripDelimiter': When the delimiter is received,
the Delimiter is deleted (i.e., stripped), and the
remaining data is transmitted.
'doNothing': The data will be transmitted when the
delimiter is received.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.6 |
portForceTransmit0: Disable the force transmit timeout.
1 to 65535: Forces the Terminal Server CN2600 series device
server's TCP/IP protocol software to try to pack
serial data received during the specified time into
the same data frame.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.7 |
comParamSetting OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.2 |
comParamPortTableThe Communication Parameters table. SEQUENCE OF ComParamPortEntry .1.3.6.1.4.1.8691.2.11.1.4.2.1 |
comParamPortEntryThe Communication Parameters entry. ComParamPortEntry .1.3.6.1.4.1.8691.2.11.1.4.2.1.1 |
portAliasPort alias is included to allow easy identification of
the serial devices that are connected to Terminal Server CN2600
series device server's serial port.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.1 |
portInterfaceThe serial interface that the port works on.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.2 |
portBaudRateThe port's speed in bits per second. You can choose
a standard baud rate by indexing.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.3 |
portBaudRateManualThe port's speed in bits per second. You can
specify a baud rate manually.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.4 |
portDataBitsThe number of bits in a character for the port.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.5 |
portStopBitsThe number of stop bits for the port.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.6 |
portParityThe parity bit for the port.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.7 |
portFlowControlThe flow-control method for the port.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.8 |
portFIFOEnable or disable the port's FIFO.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.9 |
dataBuffering OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.3 |
dataBufferingPortTableThe Data Buffering/Log table. SEQUENCE OF DataBufferingPortEntry .1.3.6.1.4.1.8691.2.11.1.4.3.1 |
dataBufferingPortEntryThe Data Buffering/Log entry. DataBufferingPortEntry .1.3.6.1.4.1.8691.2.11.1.4.3.1.1 |
portBufferingEnableEnable off-line port buffering.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.3.1.1.1 |
portSerialDataLoggingEnableEnable or disable serial data logging for the port.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.3.1.1.2 |
modemSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.4 |
modemSettingsPortTableThe Modem Settings table. SEQUENCE OF ModemSettingsPortEntry .1.3.6.1.4.1.8691.2.11.1.4.4.1 |
modemSettingsPortEntryThe Modem Settings entry. ModemSettingsPortEntry .1.3.6.1.4.1.8691.2.11.1.4.4.1.1 |
portEnableModemEnable or disable modem for this port.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.1 |
portInitialStringSet the modem's initial string to establish the
connection. E.g., 'AT&S0=1' for auto-answer.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.2 |
portDialUpSet the modem's dial-up AT command string.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.3 |
portPhoneNumberSet the number used to dial out.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.4 |
welcomeMessage OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.4.5 |
portEnableWelcomeMessageEnable or disable the welcome message.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.4.5.1 |
portMessageSet up a welcome message to greet dial-in users.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.4.5.2 |
sysManagement OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5 |
miscNetworkSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1 |
accessibleIp OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.1 |
enableAccessibleIpListEnable or disable the entire accessible IP list.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.1.1 |
accessibleIpListTableAccessible IP List table. SEQUENCE OF AccessibleIpListEntry .1.3.6.1.4.1.8691.2.11.1.5.1.1.2 |
accessibleIpListEntryAccessible IP List entry. AccessibleIpListEntry .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1 |
accessibleIpListIndexAccessible IP List index.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.1 |
activeAccessibleIpListEnable or disable this accessible IP entry.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.2 |
accessibleIpListAddressAccessible IP address. This value can be the IP address of a
single host if the netmask is set to '255.255.255.255,'
or it can be a network address.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.3 |
accessibleIpListNetmaskAccessible IP address netmask. The IP address and
netmask are used to specify a group of remote hosts.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.4 |
snmpAgentSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.2 |
snmpEnableEnable or disable SNMP agent.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.2.1 |
snmpContactNameThe SNMP contact information usually includes an
emergency contact name and telephone or pager
number.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.2.2 |
snmpLocationSpecify the location string for SNMP agents, such as
the Terminal Server CN2600 series device server. This string is
usually set to the street address where the
Terminal Server CN2600 series is physically located.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.2.3 |
dDNS OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.3 |
dDNSEnableEnable or disable the DDNS function.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.3.1 |
dDNSServerAddressThe DDNS server address. The DDNS is serviced by a
3-party provider. To use the DDNS function, you may
need to obtain a user account from the server.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.3.2 |
dDNSHostNameThe host name of the machine to be registered to
the DDNS server.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.3.3 |
dDNSUserNameThe user account provided by the DDNS server.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.3.4 |
dDNSPasswordThe user password provided by the DDNS server.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.3.5 |
hostTable OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.4 |
hostTableTableHost Table. SEQUENCE OF HostTableEntry .1.3.6.1.4.1.8691.2.11.1.5.1.4.1 |
hostTableEntryHost Table entry. HostTableEntry .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1 |
hostTableIndexThe Host Table index.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1.1 |
hostNameThe host name of the host table entry.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1.2 |
hostIpAddressRelated IP address of the host table entry.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1.3 |
routeTable OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.5 |
routeTableTableRoute Table. SEQUENCE OF RouteTableEntry .1.3.6.1.4.1.8691.2.11.1.5.1.5.1 |
routeTableEntryRoute Table entry. RouteTableEntry .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1 |
routeTableIndexThe Route Table index.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.1 |
gatewayRouteTableThe gateway property of the route table entry.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.2 |
destinationRouteTableThe destination IP address of the route table entry.
This value can be the IP address of a single host if
the netmask set to
'255.255.255.255,' or it can be a network address.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.3 |
netmaskRouteTableThe destination netmask of the route table entry.rw IpAddress .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.4 |
metricRouteTableThe routing metric for this route. The semantics of
this metric are determined by the routing-protocol.
Normally, it represents the cost for the destination.rw INTEGER .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.5 |
interfaceRouteTableThe value that identifies the local interface
through which the next hop of this route should be
reached.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.6 |
userTable OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.6 |
userTableTableUser Table. SEQUENCE OF UserTableEntry .1.3.6.1.4.1.8691.2.11.1.5.1.6.1 |
userTableEntryUser Table entry. UserTableEntry .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1 |
userTableIndexThe User Table index.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.1 |
userNameUserTableThe user name of this entry.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.2 |
passwordUserTableThe password of this user entry.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.3 |
phoneNumberUserTableThe phone number of this user entry.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.4 |
authenticationServer OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.7 |
radiusServerIpThe IP address or domain name of the RADIUS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.1.7.1 |
radiusKeyRADIUS password. Must be the same as in the RADIUS
server.rw DisplayString .1.3.6.1.4.1.8691.2.11.1.5.1.7.2 |
udpPortAuthenticationServerThe UDP port of the RADIUS server.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.7.3 |
radiusAccountingEnable or disable RADIUS accounting.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.7.4 |
sysLogSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.1.8 |
sysLocalLogLog the following events to the system log: System Cold Start,
System Warm Start, Power Down.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.8.1 |
networkLocalLogLog the following events to the system log:
DHCP/BOOTP/PPPoE Get IP/Renew, NTP, Mail Fail, NTP
Connect Fail, DHCP Fail, IP Conflict, Ethernet Link
Down.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.8.2 |
configLocalLogLog the following events to the system log: Login Fail, IP
Changed, Password Changed, Config Changed, Firmware
Upgrade, SSL Key Import, Config Import, Config
Export.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.8.3 |
opModeLocalLogLog the following op-mode events to the system log:
Connect, Disconnect, Authentication Fail, Restart.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.1.8.4 |
autoWarningSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.2 |
eventSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.2.1 |
mailWarningColdStartRefers to starting the system from power off
(contrast this with warm start). When performing a
cold start, the Terminal Server CN2600 series will
automatically issue an auto warning message by
e-mail after booting up.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.1 |
mailWarningWarmStartRefers to restarting the Terminal Server CN2600 without
turning the power off. When performing a warm start,
the Terminal Server CN2600 series will
automatically send an e-mail after rebooting.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.2 |
mailWarningPower1DownOn dual power model, when power 1 is off,
the Terminal Server CN2600 series will immediately send an e-mail.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.3 |
mailWarningPower2DownOn dual power model, when power 2 is off,
the Terminal Server CN2600 series will immediately send an e-mail.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.4 |
mailWarningEthernet1LinkDownWhen the built-in link1 port is off, the Terminal Server CN2600
series will immediately send an e-mail.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.5 |
mailWarningEthernet2LinkDownWhen the built-in link2 port is off, the Terminal Server CN2600
series will immediately send an e-mail.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.6 |
mailWarningAuthFailureThe user inputs a wrong password from the Console
or Administrator. When authentication failure
occurs, the Terminal Server CN2600 series will
immediately send an e-mail.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.7 |
mailWarningIpChangedThe user has changed the Terminal Server CN2600 series device
server's IP address. When the IP address changes,
the Terminal Server CN2600 series will send an
e-mail with the new IP address before it reboots.
If the Terminal Server CN2600 series is unable to
send an e-mail message to the mail server within 15
seconds, it will reboot anyway, and abort the e-mail
auto warning.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.8 |
mailWarningPasswordChangedThe user has changed the Terminal Server CN2600 series device
server's password. When the password changes, the
Terminal Server CN2600 series will send an e-mail
with the password changed notice before it reboots.
If the Terminal Server CN2600 series is unable to
send an e-mail message to the mail server within 15
seconds, it will reboot anyway, and abort the e-mail
auto warning.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.9 |
trapServerColdStartRefers to starting the system from power off
(contrast this with warm start). When performing a
cold start, the Terminal Server CN2600 series will
automatically issue an auto warning message by sending
a SNMP trap after booting up.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.10 |
trapServerWarmStartRefers to restarting the Terminal Server CN2600 without
turning the power off. When performing a warm start,
the Terminal Server CN2600 series will
automatically send a SNMP trap after rebooting.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.11 |
trapServerEthernet1LinkDownWhen the built-in link1 port is off, the Terminal Server CN2600
series will immediately send a SNMP trap.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.12 |
trapServerEthernet2LinkDownWhen the built-in link2 port is off, the Terminal Server CN2600
series will immediately send a SNMP trap.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.13 |
trapServerAuthFailureThe user inputs a wrong password from the Console
or Administrator. When authentication failure
occurs, the Terminal Server CN2600 series will
immediately send a SNMP trap.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.1.14 |
serialEventSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.2.2 |
portEventSettingsTablePort Event Settings Table. SEQUENCE OF PortEventSettingsEntry .1.3.6.1.4.1.8691.2.11.1.5.2.2.1 |
portEventSettingsEntryPort Event Settings entry. PortEventSettingsEntry .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1 |
mailDCDchangeA change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal changes to low, the Terminal Server CN2600
series will immediately send an e-mail
message.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.1 |
trapDCDchangeA change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal changes to low, the Terminal Server CN2600
series will immediately send an SNMP
trap.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.2 |
mailDSRchangeA change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered down. When the DSR signal
changes to low, the Terminal Server CN2600 series device server
will immediately send an e-mail message.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.3 |
trapDSRchangeA change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered down. When the DSR signal
changes to low, the Terminal Server CN2600 series device server
will immediately send an SNMP trap.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.4 |
emailAlert OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.2.3 |
emailWarningMailServerThe e-mail server's IP address or domain name of
the e-mail warning function.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.1 |
emailRequiresAuthenticationSet if the mail server requires user login.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.3.2 |
emailWarningUserNameThe user name used to log into the mail server if
authentication is required.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.3 |
emailWarningPasswordThe password used to log into the mail server if
authentication is required.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.4 |
emailWarningFromEmailThe e-mail address to be filled in the 'From' field of
the auto-warning e-mail.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.5 |
emailWarningFirstEmailAddrThe first email address to where the auto-warning
e-mail is to be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.6 |
emailWarningSecondEmailAddrThe second email address to where the auto-warning
e-mail is to be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.7 |
emailWarningThirdEmailAddrThe third email address to where the auto-warning
e-mail is to be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.8 |
emailWarningFourthEmailAddrThe fourth email address to where the auto-warning
e-mail is to be sent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.3.9 |
snmpTrap OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.2.4 |
snmpTrapReceiverIpSNMP trap server IP address or domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.5.2.4.1 |
trapVersionSNMP trap version used for the auto-warning function.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.2.4.2 |
maintenance OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.3 |
consoleSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.3.1 |
httpConsoleEnable or disable HTTP console.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.3.1.1 |
httpsConsoleEnable or disable HTTPS console.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.3.1.2 |
telnetConsoleEnable or disable Telnet console.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.3.1.3 |
sshConsoleEnable or disable SSH console.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.3.1.4 |
resetButtonFunctionEnable or disable reset button protection. You can
disable the hardware reset button after the Terminal Server CN2600
series has been restarted for 60 seconds.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.3.1.5 |
lcmReadOnlyProtectEnable or disable LCM read-only protection. If the LCM
panel is under read-only protection, users can only
view the configurations from the LCM panel. Otherwise,
by default, users can modify the settings directly
on the LCM panel.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.3.1.6 |
loadFactoryDefault OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.5.3.2 |
loadFactoryDefaultSettingThis function will reset all of the Terminal Server CN2600 series
device server's settings to the factory default
values. Be aware that previous settings will be
lost. Selecting Reset to factory default
(excluding IP configuration) will reset all settings
except the IP configuration to factory defaults.
Selecting Reset to factory default will reset all
settings including the IP configuration to factory
defaults.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.5.3.2.1 |
sysStatus OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.6 |
s2eConnections OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.6.1 |
monitorRemoteIpTableSerial to Network Connections Remote IP table. SEQUENCE OF MonitorRemoteIpEntry .1.3.6.1.4.1.8691.2.11.1.6.1.1 |
monitorRemoteIpEntrySerial to Network Connections Remote IP entry. MonitorRemoteIpEntry .1.3.6.1.4.1.8691.2.11.1.6.1.1.1 |
remoteIpIndexSerial to Network Connections Remote IP index.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.1.1.1.1 |
monitorRemoteIpThe remote IP currently connecting to this port.ro IpAddress .1.3.6.1.4.1.8691.2.11.1.6.1.1.1.2 |
serialPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.6.2 |
monitorSerialPortStatusTableSerial Port Status table. SEQUENCE OF MonitorSerialPortStatusEntry .1.3.6.1.4.1.8691.2.11.1.6.2.1 |
monitorSerialPortStatusEntrySerial Port Status entry. MonitorSerialPortStatusEntry .1.3.6.1.4.1.8691.2.11.1.6.2.1.1 |
monitorTxCountView the number of bytes transmitted from the port
since the last time the port was initialized.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.1 |
monitorRxCountView the number of bytes received by the port since
the last time the port was initialized.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.2 |
monitorTxTotalCountView the number of bytes transmitted from the port
since the last time the system was initialized.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.3 |
monitorRxTotalCountView the number of bytes received by the port since
the last time the system was initialized.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.4 |
monitorDSRView the current DSR status of this port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.5 |
monitorDTRView the current DTR status of this port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.6 |
monitorRTSView the current RTS status of this port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.7 |
monitorCTSView the current CTS status of this port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.8 |
monitorDCDView the current DCD status of this port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.9 |
serialPortErrorCount OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.6.3 |
monitorSerialPortErrorCountTableSerial Port Error Count table. SEQUENCE OF MonitorSerialPortErrorCountEntry .1.3.6.1.4.1.8691.2.11.1.6.3.1 |
monitorSerialPortErrorCountEntrySerial Port Error Count entry. MonitorSerialPortErrorCountEntry .1.3.6.1.4.1.8691.2.11.1.6.3.1.1 |
monitorErrorCountFrameView the number of 'Frame' errors for this port.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.1 |
monitorErrorCountParityView the number of 'Parity' errors for this port.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.2 |
monitorErrorCountOverrunView the number of 'Overrun' errors for this port.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.3 |
monitorErrorCountBreakView the number of 'Break' errors for this port.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.4 |
serialPortSettings OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.6.4 |
monitorSerialPortSettingsTableSerial Port Settings table. SEQUENCE OF MonitorSerialPortSettingsEntry .1.3.6.1.4.1.8691.2.11.1.6.4.1 |
monitorSerialPortSettingsEntrySerial Port Settings entry. MonitorSerialPortSettingsEntry .1.3.6.1.4.1.8691.2.11.1.6.4.1.1 |
monitorBaudRateView the current baudrate of the port.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.1 |
monitorDataBitsView the number of bits per byte for the port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.2 |
monitorStopBitsView the number of stop bits for the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.3 |
monitorParityView the parity bit for the port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.4 |
monitorRTSCTSFlowControlView if the port is using RTS/CTS flow control.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.5 |
monitorXONXOFFFlowControlView if the port is using XON/XOFF flow control.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.6 |
monitorDTRDSRFlowControlView if the port is using DTR/DSR flow control.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.7 |
monitorFIFOView FIFO status of this port.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.8 |
monitorInterfaceView the serial interface that the port is using.ro Enumeration .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.9 |
serialPortBuffering OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.6.5 |
monitorSerialPortBufferingTableSerial Port Buffering table. SEQUENCE OF MonitorSerialPortBufferingEntry .1.3.6.1.4.1.8691.2.11.1.6.5.1 |
monitorSerialPortBufferingEntrySerial Port Settings entry. MonitorSerialPortBufferingEntry .1.3.6.1.4.1.8691.2.11.1.6.5.1.1 |
monitorBufferingView length of buffered data for the port. The length unit is byte.ro INTEGER .1.3.6.1.4.1.8691.2.11.1.6.5.1.1.1 |
saveConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.7 |
saveConfigSave the applied configuration to the Terminal Server CN2600
series device server.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.7.1 |
restart OBJECT IDENTIFIER .1.3.6.1.4.1.8691.2.11.1.8 |
restartPortsRestart serial port. Restarting will cause port
reseting.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.8.1 |
restartSystemRestart the Terminal Server CN2600 series device server. Be sure
to save all of your configuration changes before
you restart the system. Otherwise, all of the changes will be
lost.rw Enumeration .1.3.6.1.4.1.8691.2.11.1.8.2 |