MOBANetClocksV2-MIB
AI MIB Summary
The MOBANetClocksV2-MIB module enables SNMP-based monitoring and management of MOBATime network slave clock hardware, specifically exposing time synchronization status, clock state variables, and synchronization error metrics for distributed timing infrastructure.
This mib definition is used for all MOBATime network slave clocks.
Main OID:
mbnscMIB.1.3.6.1.4.1.13842.6.100
179
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
mobatime OBJECT IDENTIFIER .1.3.6.1.4.1.13842 |
mobaNetClocks OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6 |
mobaNetClocksV2 OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2 |
mbnscNet OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.1 |
mbnscNetGen OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.1.1 |
mbnscNetGenMACMAC-Address (xx xx xx xx xx xx)ro OCTET STRING .1.3.6.1.4.1.13842.6.2.1.1.1 |
mbnscNetGenIPModeIP Mode: 0: IPv4 and IPv6 1: IPv4 only 2: IPv6 onlyrw Enumeration .1.3.6.1.4.1.13842.6.2.1.1.2 |
mbnscNetGenIPNameserverIPv4 or IPv6 address (xxx.xxx.xxx.xxx or xxxx::xxxx:xxxx) of the nameserverrw DisplayString .1.3.6.1.4.1.13842.6.2.1.1.3 |
mbnscNetGenTZClientPortTimezone client port. Default 65534rw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.1.4 |
mbnscNetGenConfigPortConfiguration port. Default 65532rw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.1.5 |
mbnscNetGenSnmpModeSNMP mode disabled 0: SNMP enabled (default) 1: SNMP disabledro Unsigned32 .1.3.6.1.4.1.13842.6.2.1.1.6 |
mbnscNetGenMulticastModeMulticast mode disabled 0: Multicast enabled (default) 1: Multicast disabledrw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.1.7 |
mbnscNetGenHostnameHost name of the devicerw DisplayString .1.3.6.1.4.1.13842.6.2.1.1.8 |
mbnscNetGenCommModeCommunication / synchronisation mode 0=unicast 1=multicast (only for digital clocks)ro Unsigned32 .1.3.6.1.4.1.13842.6.2.1.1.9 |
mbnscNetGenMCastGrpIPIP network address (xxx.xxx.xxx.xxx) of the multicast group IP e.g. 239.192.54.1 (only for digital clocks)rw IpAddress .1.3.6.1.4.1.13842.6.2.1.1.10 |
mbnscNetGenConfigCmdNetwork configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.1.100 |
mbnscNetGenConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.1.1.101 |
mbnscNetIPv4 OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.1.2 |
mbnscNetIPv4AddrIP network address (xxx.xxx.xxx.xxx) of the network slave clockrw IpAddress .1.3.6.1.4.1.13842.6.2.1.2.1 |
mbnscNetIPv4MaskIP subnet mask (xxx.xxx.xxx.xxx)rw IpAddress .1.3.6.1.4.1.13842.6.2.1.2.2 |
mbnscNetIPv4GatewayIP network address (xxx.xxx.xxx.xxx) for the gatewayrw IpAddress .1.3.6.1.4.1.13842.6.2.1.2.3 |
mbnscNetIPv4DHCPModeDHCP mode 0: DHCP disabled 1: DHCP enabled (default)rw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.2.4 |
mbnscNetIPv4ConfigCmdNetwork configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.2.100 |
mbnscNetIPv4ConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.1.2.101 |
mbnscNetIPv6 OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.1.3 |
mbnscNetIPv6AddrLocalIP V6 link local network address (xxxx:xxxx::xxxx)ro DisplayString .1.3.6.1.4.1.13842.6.2.1.3.1 |
mbnscNetIPv6AddrAutoIP V6 network address by autoconfig (xxxx:xxxx::xxxx)ro DisplayString .1.3.6.1.4.1.13842.6.2.1.3.2 |
mbnscNetIPv6AddrDHCPIP V6 network address by DHCPv6 (xxxx:xxxx::xxxx)ro DisplayString .1.3.6.1.4.1.13842.6.2.1.3.3 |
mbnscNetIPv6AddrFixIP V6 network address manual set (xxxx:xxxx::xxxx)rw MOBANetworkName .1.3.6.1.4.1.13842.6.2.1.3.4 |
mbnscNetIPv6PrefixIPv6 subnet prefix for manual set IP addressrw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.3.5 |
mbnscNetIPv6GatewayIP V6 network address of gateway (next hop) (xxxx:xxxx::xxxx)ro DisplayString .1.3.6.1.4.1.13842.6.2.1.3.6 |
mbnscNetIPv6ConfigMode of IPv6 adress configuration 0: auto and fixed 1: autoconfig only 2: DHCPv6 only 3: nonerw Enumeration .1.3.6.1.4.1.13842.6.2.1.3.7 |
mbnscNetIPv6ConfigCmdNetwork configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.1.3.100 |
mbnscNetIPv6ConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.1.3.101 |
mbnscTime OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.2 |
mbnscTimeNTP1String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.rw DisplayString .1.3.6.1.4.1.13842.6.2.2.1 |
mbnscTimeNTP2String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.rw DisplayString .1.3.6.1.4.1.13842.6.2.2.2 |
mbnscTimeNTP3String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.rw DisplayString .1.3.6.1.4.1.13842.6.2.2.3 |
mbnscTimeNTP4String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.rw DisplayString .1.3.6.1.4.1.13842.6.2.2.4 |
mbnscTimeNTPcurrentIPv4 or IPv6 address of current NTP serverro DisplayString .1.3.6.1.4.1.13842.6.2.2.5 |
mbnscTimeNTPpollIntervallNTP request intervall 10..999secrw Unsigned32 .1.3.6.1.4.1.13842.6.2.2.6 |
mbnscTimeDeviceTimeActual device time (UTC). Seconds since 1.1.1970 00:00:00ro Unsigned32 UNITS "Seconds" .1.3.6.1.4.1.13842.6.2.2.7 |
mbnscTimeLocOffsetOffset to localt time in minutes (-720..720)ro Integer32 (-720..720) UNITS "minutes (min)" .1.3.6.1.4.1.13842.6.2.2.8 |
mbnscTimeLastReceptionLast received time (UTC). Seconds since 1.1.1970 00:00:00ro Unsigned32 UNITS "Seconds" .1.3.6.1.4.1.13842.6.2.2.9 |
mbnscTimeConfigCmdTime configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.2.100 |
mbnscTimeConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.2.101 |
mbnscTimeZone OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.3 |
mbnscTimeZoneVersionActual version internal time zone tablero Integer32 .1.3.6.1.4.1.13842.6.2.3.1 |
mbnscTimeZoneNumberTime zone 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 254: automatic time zone - e.g. UTC 255: internal user defined time zone (SET only used for digital clocks)rw Integer32 .1.3.6.1.4.1.13842.6.2.3.2 |
mbnscTimeZoneEntry1Time Zone entry -> see special definitionro OCTET STRING .1.3.6.1.4.1.13842.6.2.3.3 |
mbnscTimeZoneEntry2Time Zone entry -> see special definitionro OCTET STRING .1.3.6.1.4.1.13842.6.2.3.4 |
mbnscTimeZoneEntry3Time Zone entry -> see special definitionro OCTET STRING .1.3.6.1.4.1.13842.6.2.3.5 |
mbnscTimeZoneEntry4Time Zone entry -> see special definitionro OCTET STRING .1.3.6.1.4.1.13842.6.2.3.6 |
mbnscTimeZoneEntry5Time Zone entry -> see special definitionro OCTET STRING .1.3.6.1.4.1.13842.6.2.3.7 |
mbnscTimeZoneEntry6Time Zone entry -> see special definitionro OCTET STRING .1.3.6.1.4.1.13842.6.2.3.8 |
mbnscTimeZoneEntry7Time Zone entry -> see special definitionro OCTET STRING .1.3.6.1.4.1.13842.6.2.3.9 |
mbnscTimeZoneConfigCmdTime zone configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.3.100 |
mbnscTimeZoneConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.3.101 |
mbnscMode OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4 |
mbnscModeSwitchInfoCurrent switch settings (only analogue movements)ro Integer32 .1.3.6.1.4.1.13842.6.2.4.1 |
mbnscModeDisplayBrightnessDisplay brightness for digital clocks 1..30, A (Auto)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.2 |
mbnscModeDisplayFormatDisplay format 12h/24h for digital clocksrw DisplayString .1.3.6.1.4.1.13842.6.2.4.3 |
mbnscModeDisplayAlternateDisplay alternating mode for digital clocks 1: time continuously 2: date cont. 3: temperature cont. (sequence 6 sec. time, 3 sec. date for ECO-DC) 4: stopwatch cont. (only DC clock) 5: sequence 6 sec. time, 3 sec. date (only DC clock) 6: sequence 8 sec. time, 3 sec. date, 3 sec. temperature (only DC clock)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.4 |
mbnscModeNTPNTP synchronisation mode for digital clocksobsolete DisplayString .1.3.6.1.4.1.13842.6.2.4.5 |
mbnscModeIRlockIR autolock time for digital clocks (only DC clock) 1..60, U (autolock off)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.6 |
mbnscModeTimeDispZerosLeading zeros time display for digital clocks (only DC clock) 1: time with leading zero 2: time without leading zerorw DisplayString .1.3.6.1.4.1.13842.6.2.4.7 |
mbnscModeDateDispZerosLeading zeros date display for digital clocks (only DC clock) 1: date with leading zero 2: date without leading zerorw DisplayString .1.3.6.1.4.1.13842.6.2.4.8 |
mbnscModeTempUnitTemperature unit for digital clocks (only DC clock) C: Celsius F: Fahrenheitrw DisplayString .1.3.6.1.4.1.13842.6.2.4.9 |
mbnscModeClockOpModeOperation mode for digital clocks (only DC clock) 0: normal mode 1: special mode 1 2: special mode 2rw DisplayString .1.3.6.1.4.1.13842.6.2.4.10 |
mbnscModeNWParamNetwork parameter setting mode for digital clocksobsolete DisplayString .1.3.6.1.4.1.13842.6.2.4.11 |
mbnscModeDispDeratingDisplay current deration setting for digital clocks (see service menu definition)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.12 |
mbnscModeLightCorrLight measurement correction for digital clocks (see service menu definition)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.13 |
mbnscAdditionalDigitalClockModes OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4.30 |
mbnscSensors OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4.30.1 |
mbnscSensorsTempActivationTemperature sensor activation 1: DS18B20 3: TME (only sensor 1) 4: TME (Sensors 1 and 2)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.1.1 |
mbnscSensorsTemp1IPAddrIP network address (xxx.xxx.xxx.xxx) of the sensor 1 (SET only used for digital clocks)rw IpAddress .1.3.6.1.4.1.13842.6.2.4.30.1.2 |
mbnscSensorsTemp2IPAddrIP network address (xxx.xxx.xxx.xxx) of the sensor 2 (SET only used for digital clocks)rw IpAddress .1.3.6.1.4.1.13842.6.2.4.30.1.3 |
mbnscSensorsConfigCmdMode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.4.30.1.100 |
mbnscSensorsConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.4.30.1.101 |
mbnscDA OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4.30.2 |
mbnscDASecondCircleDisplayThe second circle display mode 1: Accumulating ring of seconds marker 2: Take actual second from full shining circle step by step 3: Full shining circle, actual second off 4: Three shining seconds, the first is showing actual second 5: Two shining seconds, the first is showing actual secondrw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.2.1 |
mbnscDAConfigCmdMode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.4.30.2.100 |
mbnscDAConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.4.30.2.101 |
mbnscDK OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4.30.3 |
mbnscDKFirstLanguageFirst language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.1 |
mbnscDKSecondLanguageSecond language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.2 |
mbnscDKThirdLanguageThird language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.3 |
mbnscDKTempUnitSecondLangTemperature units for second selected language C: Celsius F: Fahrenheitrw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.4 |
mbnscDKTempUnitThirdLangTemperature units for third selected language C: Celsius F: Fahrenheitrw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.5 |
mbnscDKAutoLangSwitchOverLanguage switch mode for automatic language switching over in one display alternating cycle A: all languages S: simple languagerw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.6 |
mbnscDKNumOfCharsForWeekdayNumber of characters used for weekday names 2: two characters 3: three charactersrw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.7 |
mbnscDKNamesFormatDisplayWeekday and month display format 1: first capital 2: all capitalsrw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.8 |
mbnscDKTemp1DescriptEnableDisplay of description for first measured temperature N/Yrw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.9 |
mbnscDKTemp1DescriptionDescription text for first measured temperaturerw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.10 |
mbnscDKTemp2DescriptEnableDisplay of description for second measured temperature N/Yrw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.11 |
mbnscDKTemp2DescriptionDescription text for second measured temperaturerw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.12 |
mbnscDKWorldTimeZone1Index of time zone for world time zone 1 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)rw Integer32 .1.3.6.1.4.1.13842.6.2.4.30.3.13 |
mbnscDKWorldTimeZone1DescriptionDescription text for World time zone 1rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.14 |
mbnscDKWorldTimeZone2Index of time zone for world time zone 2 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)rw Integer32 .1.3.6.1.4.1.13842.6.2.4.30.3.15 |
mbnscDKWorldTimeZone2DescriptionDescription text for World time zone 2rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.16 |
mbnscDKWorldTimeZone3Index of time zone for world time zone 3 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)rw Integer32 .1.3.6.1.4.1.13842.6.2.4.30.3.17 |
mbnscDKWorldTimeZone3DescriptionDescription text for World time zone 3rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.18 |
mbnscDKWorldTimeZone4Index of time zone for world time zone 4 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)rw Integer32 .1.3.6.1.4.1.13842.6.2.4.30.3.19 |
mbnscDKWorldTimeZone4DescriptionDescription text for World time zone 4rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.20 |
mbnscDKWorldTimeZone5Index of time zone for world time zone 5 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)rw Integer32 .1.3.6.1.4.1.13842.6.2.4.30.3.21 |
mbnscDKWorldTimeZone5DescriptionDescription text for World time zone 5rw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.22 |
mbnscDKAutoTimeZoneSwitchOverWorld time switch mode for automatic time zone switching over in one display alternating cycle A: all world time zones S: simple world time zonerw DisplayString .1.3.6.1.4.1.13842.6.2.4.30.3.23 |
mbnscDKConfigCmdMode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.4.30.3.100 |
mbnscDKConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.4.30.3.101 |
mbnscAdditionalInterfaceModes OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4.40 |
mbnscNMI OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4.40.1 |
mbnscNMIDCFCurrentLoopOperation mode of the DCF77 current loop. 0: OFF 1: ONrw Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.1 |
mbnscNMILineDriverOperation mode of the line driver. 0: OFF 1: MOBALine 2: Active DCFrw Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.2 |
mbnscNMIMOBALineModeOperation mode of MOBALine. 0: normal operation 1: 12:00 mode, sideclocks shows 12:00 position 2: clock-id mode, sideclocks shows their ids if configuredrw Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.3 |
mbnscNMIMOBALineMinuteHandModeMinute hand mode operation of MOBALine. 0: minute step mode 1: half minute step mode 2: continuous moderw Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.4 |
mbnscNMIActiveDCFModeOperation mode of Active DCF. 1: Mode 1 2: Mode 2 3: Mode 3 4: Mode 4 5: Mode 5 6: Mode 6rw Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.5 |
mbnscNMISideClockState OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.4.40.1.20 |
mbnscNMISideClock1State of side clock 1 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.1 |
mbnscNMISideClock2State of side clock 2 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.2 |
mbnscNMISideClock3State of side clock 3 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.3 |
mbnscNMISideClock4State of side clock 4 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.4 |
mbnscNMISideClock5State of side clock 5 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.5 |
mbnscNMISideClock6State of side clock 6 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.6 |
mbnscNMISideClock7State of side clock 7 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.7 |
mbnscNMISideClock8State of side clock 8 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.8 |
mbnscNMISideClock9State of side clock 9 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.9 |
mbnscNMISideClock10State of side clock 10 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.10 |
mbnscNMISideClock11State of side clock 11 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.11 |
mbnscNMISideClock12State of side clock 12 0: Clock not configured 3: Clock OK 5: Clock errorro Enumeration .1.3.6.1.4.1.13842.6.2.4.40.1.20.12 |
mbnscNMIConfigCmdGeneral configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.4.40.1.100 |
mbnscNMIConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.4.40.1.101 |
mbnscModeConfigCmdMode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.4.100 |
mbnscModeConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.4.101 |
mbnscGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.5 |
mbnscGeneralTypeNetwork slave clock type 1 Network Clock Interface NCI 2 Wireless Time Distribution WTD 868-T 3 NTP movement SEN 00 4 NTP movement NBU 190 5 Digital Clock ECO-DC 6 Digital Clock DC3 7 NTP movement SEN 40 8 NTP movement SAN 40 9 NTP digital clock DA 10 NTP calendar digital clock DK2 11 Network MOBALine Interface NMI 12 NTP clock TREND 13 NTP clock TREND double sided 14 NTP in- and outdoor digital clock DSCro Integer32 .1.3.6.1.4.1.13842.6.2.5.1 |
mbnscGeneralNameDevice name (identifier)rw DisplayString .1.3.6.1.4.1.13842.6.2.5.2 |
mbnscGeneralFirmwareNumberArticle number of the firmware.ro DisplayString .1.3.6.1.4.1.13842.6.2.5.3 |
mbnscGeneralFirmwareVerFirmware version.ro DisplayString .1.3.6.1.4.1.13842.6.2.5.4 |
mbnscGeneralStatusNetwork slave clock status (64bit). Internal state of the network slave clock. Used for maintenance only. Bit 00 : time ok Bit 01 : 12h position Bit 02 : Reserved Bit 03 : Reserved Bit 04 : Reserved Bit 05 : Reserved Bit 06 : Reserved Bit 07 : Reserved Bit 08 : Reserved Bit 09 : Reserved Bit 10 : Reserved Bit 11 : Reserved Bit 12 : Reserved Bit 13 : Reserved Bit 14 : Reserved Bit 15 : Reserved Bit 16 : Reserved Bit 17 : Reserved Bit 18 : Reserved Bit 19 : Reserved Bit 20 : Reserved Bit 21 : Reserved Bit 22 : Reserved Bit 23 : Reserved Bit 24 : Reserved Bit 25 : Reserved Bit 26 : Reserved Bit 27 : Reserved Bit 28 : Reserved Bit 29 : Reserved Bit 30 : Reserved Bit 31 : Reserved Bit32..63 not usedro MOBAFlags64 .1.3.6.1.4.1.13842.6.2.5.5 |
mbnscGeneralAlarmsAlarm state of the network slave clock Bit00=Synchronization Bit01=Power supply Bit02=Slave (cascade) Bit03=Illumination Bit04=Hands position (sec) Bit05=Hands position (m/h) Bit06=Restart Bit07=CommError Bit08=Time zone Bit09=Reserved Bit10=Reserved Bit11=Reserved Bit12=Reserved Bit13=Reserved Bit14=Reserved Bit15=Reserved Bit16=Reserved Bit17=Reserved Bit18=Reserved Bit19=Reserved Bit20=Reserved Bit21=Reserved Bit22=Reserved Bit23=Reserved Bit24=Reserved Bit25=Reserved Bit26=Reserved Bit27=Reserved Bit28=Reserved Bit29=Reserved Bit30=Reserved Bit31=Reserved Bit32..Bit63=Device type specific errorro MOBAAlarm64 .1.3.6.1.4.1.13842.6.2.5.6 |
mbnscGeneralSlaveInfo1Info from slave 1 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reservedro OCTET STRING .1.3.6.1.4.1.13842.6.2.5.7 |
mbnscGeneralSlaveInfo2Info from slave 2 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reservedro OCTET STRING .1.3.6.1.4.1.13842.6.2.5.8 |
mbnscGeneralSlaveInfo3Info from slave 3 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reservedro OCTET STRING .1.3.6.1.4.1.13842.6.2.5.9 |
mbnscGeneralConfigCmdGeneral configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.5.100 |
mbnscGeneralConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.5.101 |
mbnscSupervision OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.6 |
mbnscSNMPManager1String with IPv4 or IPv6 address (e.g 192.168.3.4 or FD03:2345:2345:2345::231) of the SNMP manager 1rw DisplayString .1.3.6.1.4.1.13842.6.2.6.1 |
mbnscSNMPManager2String with IPv4 or IPv6 address (e.g 192.168.3.4 or FD03:2345:2345:2345::231) of the SNMP manager 2rw DisplayString .1.3.6.1.4.1.13842.6.2.6.2 |
mbnscSNMPTrapAliveMsgIntervalTime interval to send the alive message to the trap listener stations. 0: Alive message disabled >0: Alive message enabled Range: 1 ... 1440 minutesrw Unsigned32 (0 | 1..1440) UNITS "minutes (min)" .1.3.6.1.4.1.13842.6.2.6.3 |
mbnscSNMPConfigCmdSNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.6.100 |
mbnscSNMPConfigChangedTimeTime of the last configuration change.ro TimeTicks UNITS "Time ticks in 1/100th seconds" .1.3.6.1.4.1.13842.6.2.6.101 |
mbnscCommand OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.7 |
mbnscCommand12PosMode of the analogue clock: 0=run, 1=12h positionrw Unsigned32 .1.3.6.1.4.1.13842.6.2.7.1 |
mbnscCommandSWResetCommand SW reset if set to 1rw Unsigned32 .1.3.6.1.4.1.13842.6.2.7.2 |
mbnscCommandFactorySettingRestore factory settings if set to 1rw Unsigned32 .1.3.6.1.4.1.13842.6.2.7.3 |
mbnscCommandFirmwUpdCommand to start FW updatero OCTET STRING .1.3.6.1.4.1.13842.6.2.7.4 |
mbnscCommandExtContactSet external contactro Integer32 .1.3.6.1.4.1.13842.6.2.7.5 |
mbnscCommandConfigCmdSNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configurationrw Unsigned32 .1.3.6.1.4.1.13842.6.2.7.100 |
mbnscSnmpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.9 |
mbnscSnmpCurrentAlarmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.9.1 |
mbnscTrapAlMsgErrorNrError number of the trap message.ro Unsigned32 .1.3.6.1.4.1.13842.6.2.9.1.1 |
mbnscTrapAlMsgErrorStateError state of the trap message.ro Unsigned32 .1.3.6.1.4.1.13842.6.2.9.1.2 |
mbnscTrapAlMsgErrorTimeError time of the trap message. Seconds since 1.1.1970 00:00:00ro Unsigned32 UNITS "Seconds" .1.3.6.1.4.1.13842.6.2.9.1.3 |
mbnscTraps OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.2.10 |
mbnscTrapsAlarmAlarm trap with attached (binded variables) alarm information. mbnscTrapAlMsgErrorNr, mbnscTrapAlMsgErrorState, mbnscTrapAlMsgErrorTime NOTIFICATION-TYPE .1.3.6.1.4.1.13842.6.2.10.1 |
mbnscTrapsAliveDevice alive trap. Will be send in the configured interval. Attached are the variables mbnscGeneralStatus and mbnscGeneralAlarms. NOTIFICATION-TYPE .1.3.6.1.4.1.13842.6.2.10.2 |
mbnscMIBThis mib definition is used for all MOBATime network slave clocks. MODULE-IDENTITY .1.3.6.1.4.1.13842.6.100 |
mbnscMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.100.1 |
mbnscMIBCompliancesPlease replace this text with your description. Unknown .1.3.6.1.4.1.13842.6.100.1.1 |
mbnscMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.13842.6.100.2 |
mbnscAllNotificationsThis automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP Unknown .1.3.6.1.4.1.13842.6.100.2.1 |
mbnscGrpNBU190All parameters used for NBU 190 movement Unknown .1.3.6.1.4.1.13842.6.100.2.2 |
mbnscGrpSEN40All parameters used for SEN 40 movement Unknown .1.3.6.1.4.1.13842.6.100.2.3 |
mbnscGrpDCAll parameters used for DC digital clock Unknown .1.3.6.1.4.1.13842.6.100.2.4 |
mbnscGrpECODCAll parameters used for ECO DC digital clock Unknown .1.3.6.1.4.1.13842.6.100.2.5 |
mbnscGrpDAAll parameters used for DA digital clock Unknown .1.3.6.1.4.1.13842.6.100.2.6 |
mbnscGrpDKAll parameters used for DK digital clock Unknown .1.3.6.1.4.1.13842.6.100.2.7 |
mbnscGrpNMIAll parameters used for Network-MOBALine-Interface NMI Unknown .1.3.6.1.4.1.13842.6.100.2.8 |
mbnscGrpNotUsedParametersAll parameters not used in oother groups Unknown .1.3.6.1.4.1.13842.6.100.2.100 |