MIMOSA-NETWORKS-BFIVE-MIB
AI MIB Summary
The MIMOSA-NETWORKS-BFIVE-MIB defines the managed objects for monitoring and configuring Mimosa Networks BFive series wireless access points and client radios, specifically exposing RF link statistics, interface states, and hardware telemetry. This module enables network management systems to track performance metrics such as signal strength, throughput, error rates, and device health for the BFive platform.
Mimosa device MIB definitions
Main OID:
mimosaB5Module.1.3.6.1.4.1.43356.2.4.1
88
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
88 total| Object Name |
|---|
mimosaGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.1 |
mimosaDeviceNameThe name of the local Mimosa device. This unique identifier could be the same as the sysName object.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.1.1 |
mimosaSerialNumberThe unique serial number of the Mimosa device.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.1.2 |
mimosaFirmwareVersionThe version of the currently installed and/or running firmware on the Mimosa device.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.1.3 |
mimosaFirmwareBuildDateThe creation date of the currently installed and/or running firmware on the Mimosa device.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.1.4 |
mimosaLastRebootTimeThe last time the Mimosa device rebooted.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.1.5 |
mimosaUnlockCodeThe code used to unlock the Mimosa device.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.1.6 |
mimosaLEDBrightnessIndicates the intensity of the status indicator lights on the device exterior. The Auto option adjusts the amount of light based upon ambient conditions. Manual options include Low, Medium, and High.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.1.7 |
mimosaInternalTempThe internal temperature of the Mimosa device.ro DecimalOne UNITS "C" .1.3.6.1.4.1.43356.2.1.2.1.8 |
mimosaRegulatoryDomainThe country in which the Mimosa device has been configured to run.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.1.9 |
mimosaLocInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.2 |
mimosaLongitudeThe Longitude of the Mimosa device location, in 5 decimal points.ro DecimalFive .1.3.6.1.4.1.43356.2.1.2.2.1 |
mimosaLatitudeThe Latitude of the Mimosa device location, in 5 decimal points.ro DecimalFive .1.3.6.1.4.1.43356.2.1.2.2.2 |
mimosaAltitudeThe Altitude of the Mimosa device location in meters.ro Integer32 UNITS "meters" .1.3.6.1.4.1.43356.2.1.2.2.3 |
mimosaSatelliteSNRThe average Signal to Noise Ratio (SNR) amongst all of the satellites detected by the Mimosa device. Display is in 1 decimal point.ro DecimalOne UNITS "dB" .1.3.6.1.4.1.43356.2.1.2.2.4 |
mimosaSatelliteStrengthStrength of the satellites based on the number of satellites available. It is considered good if more than 2 satellites are available.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.2.5 |
mimosaGPSSatellitesTotal number of GPS satellites detected.ro Integer32 .1.3.6.1.4.1.43356.2.1.2.2.6 |
mimosaGlonassSatellitesTotal number of GLONASS satellites detected.ro Integer32 .1.3.6.1.4.1.43356.2.1.2.2.7 |
mimosaClockAccuracyTiming signal accuracy measured in parts per billion (PPB) by the Mimosa device. Display is in 2 decimal points.ro DecimalTwo UNITS "PPB" .1.3.6.1.4.1.43356.2.1.2.2.8 |
mimosaWanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.3 |
mimosaWanSsidThe wireless link name used by both radios. Both AP and Station must use the same SSID to communicate with each other.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.3.1 |
mimosaWanMacThe MAC address used for the wireless link.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.43356.2.1.2.3.2 |
mimosaWanStatusThe wireless link status between the Mimosa devices.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.3.3 |
mimosaWanUpTimeThe wireless link up time since last reboot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.43356.2.1.2.3.4 |
mimosaTdmaInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.4 |
mimosaWirelessModeDescribes wherger the Mimosa device acts as an access point or station.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.4.1 |
mimosaWirelessProtocolDescribes the wireless protocol configured on the Mimosa device. Both TDMA and CSMA are supported. TDMA is a deterministic protocol where each device is assigned a time slot during which it is allowed to transmit. This allows for collocated radios to utilize the same channel and avoid Tx/Rx collisions and interference.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.4.2 |
mimosaTDMAModeSpecifies the TDMA Gender of the radio (A or B).ro Enumeration .1.3.6.1.4.1.43356.2.1.2.4.3 |
mimosaTDMAWindowSpecifies the length of the transmit time slot in milliseconds.ro Integer32 UNITS "ms" .1.3.6.1.4.1.43356.2.1.2.4.4 |
mimosaTrafficSplitThe radio can be configured to allocate bandwidth symmetrically (50/50) or asymmetrically (75/25 or 25/75) in environments where traffic direction is expected to be heavier in one direction than the other. With an asymmetrical split, the local radio is represented first in the slash notation, (local/remote). For example, in the (75/25) split, the local radio gets 75, while the remote radio gets 25. If Auto is selected the radio will automatically determine, based upon traffic flow, which ratio will be used. The radio will continue to evaluate the flow and adjust accordingly.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.4.5 |
mimosaMgmtInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.5 |
mimosaNetworkModeSpecifies the mode for the local 2.4 GHz wireless network operation. If Auto is selected, the 2.4 GHz management network is turned on for a limited time (defined in Console Timeout ) after boot and then turned off if there is no activity. If a user associates with the radio within the timeout period, they will not be disconnected.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.5.1 |
mimosaRecoverySsidThe recovery SSID that allows the device to be reset to factory defaults. This is available for 10 minutes after device boot. Disabling the 2.4 GHz management network will not impact availability of this option. The serial number of the device must be known in order to perform the factory reset.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.5.2 |
mimosaLocalSsidThe SSID for managing the local 2.4 GHz wireless interface.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.5.3 |
mimosaLocalChannelThe channel used for the local 2.4 GHz wireless interface.ro Integer32 .1.3.6.1.4.1.43356.2.1.2.5.4 |
mimosaConsoleTimeoutThe amount inactivity on the 2.4 GHz wireless interface before turning it off in Auto mode.ro Integer32 UNITS "min" .1.3.6.1.4.1.43356.2.1.2.5.5 |
mimosaMaxClientsThe maximum number of wireless clients that can simultaneously access the 2.4 GHz management interface.ro Integer32 .1.3.6.1.4.1.43356.2.1.2.5.6 |
mimosaLocalMacThe MAC address used for 2.4 GHz wireless link.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.43356.2.1.2.5.7 |
mimosaLocalIpAddrThe IP address assigned to the 2.4 GHz wireless link.ro IpAddress .1.3.6.1.4.1.43356.2.1.2.5.8 |
mimosaLocalNetMaskThe IP netmask assigned to the 2.4 GHz wireless link.ro IpAddress .1.3.6.1.4.1.43356.2.1.2.5.9 |
mimosaLocalGatewayThe IP address of the gateway for the 2.4 GHz wireless link.ro IpAddress .1.3.6.1.4.1.43356.2.1.2.5.10 |
mimosaFlowControlSpecifies whether Flow Control is enabled on the Mimosa device.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.5.11 |
mimosaRfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.6 |
mimosaChainTableA list of RF chain entries, which is part of MIMO tables. MIMO stands for Multiple In Multiple Out. SEQUENCE OF MimosaChainEntry .1.3.6.1.4.1.43356.2.1.2.6.1 |
mimosaChainEntryAn entry containing chain information applicable to a particular RF chain. MimosaChainEntry .1.3.6.1.4.1.43356.2.1.2.6.1.1 |
mimosaChainAn index which is used to access a particular entry in the chain table. Integer32 .1.3.6.1.4.1.43356.2.1.2.6.1.1.1 |
mimosaTxPowerSpecifies the transmit power of the given RF chain. A value of -8 means this particular TxChain is not a valid entry.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.43356.2.1.2.6.1.1.2 |
mimosaRxPowerSpecifies the receive power of the given RF chain. A value of -100 means this particular RxChain is not a valid entry (SNR must be -100).ro Integer32 UNITS "dBm" .1.3.6.1.4.1.43356.2.1.2.6.1.1.3 |
mimosaRxNoiseSpecifies the received noise level for the given RF chain.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.43356.2.1.2.6.1.1.4 |
mimosaSNRIndicates the Signal to Noise Ratio (SNR) for the given RF chain. A value of -100 means this particular RxChain is not a valid entry.ro Integer32 UNITS "dB" .1.3.6.1.4.1.43356.2.1.2.6.1.1.5 |
mimosaCenterFreqThe center frequency for the given RF chain. A value of 0 means this particular Chain is not a valid entry.ro Integer32 UNITS "MHz" .1.3.6.1.4.1.43356.2.1.2.6.1.1.6 |
mimosaPolarizationThe ploarization of the given RF chain. It could be horizontal or vertical.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.6.1.1.7 |
mimosaStreamTableA list of data stream entries, which are part of MIMO tables. MIMO stands for Multiple In Multiple Out. SEQUENCE OF MimosaStreamEntry .1.3.6.1.4.1.43356.2.1.2.6.2 |
mimosaStreamEntryThe entry containing information applicable to a particular stream. MimosaStreamEntry .1.3.6.1.4.1.43356.2.1.2.6.2.1 |
mimosaStreamThe index used to access a particular entry in the stream table. Integer32 .1.3.6.1.4.1.43356.2.1.2.6.2.1.1 |
mimosaTxPhySpecifies the transmit rate of the given data stream.ro Integer32 UNITS "Mbps" .1.3.6.1.4.1.43356.2.1.2.6.2.1.2 |
mimosaTxMCSSpecifies the transmit MCS of the given data stream. A value of -1 means this particular TxStream is not a valid entry.ro Integer32 .1.3.6.1.4.1.43356.2.1.2.6.2.1.3 |
mimosaTxWidthSpecifies the channel width based on MCS. A value of -1 means this particular TxWidth is not a valid entryro Integer32 UNITS "MHz" .1.3.6.1.4.1.43356.2.1.2.6.2.1.4 |
mimosaRxPhySpecifies the receive rate of the given data stream.ro Integer32 UNITS "Mbps" .1.3.6.1.4.1.43356.2.1.2.6.2.1.5 |
mimosaRxMCSSpecifies the receive MCS of the given data stream. A value of -1 means this particular RxStream is not a valid entry.ro Integer32 .1.3.6.1.4.1.43356.2.1.2.6.2.1.6 |
mimosaRxWidthSpecifies the receive Rx Width of the given data stream. A value of -1 means this particular RxWidth is not a valid entry.ro Integer32 UNITS "MHz" .1.3.6.1.4.1.43356.2.1.2.6.2.1.7 |
mimosaRxEVMSpecifies the receive Error Vector Magnitude (EVM) of the given data stream.ro Integer32 UNITS "dB" .1.3.6.1.4.1.43356.2.1.2.6.2.1.8 |
mimosaChannelTableA list of RF channel entries on the Mimosa device. SEQUENCE OF MimosaChannelEntry .1.3.6.1.4.1.43356.2.1.2.6.3 |
mimosaChannelEntryThe entry containing management information applicable to a particular channel. MimosaChannelEntry .1.3.6.1.4.1.43356.2.1.2.6.3.1 |
mimosaChannelThe index used to access a particular entry in the RF channel table. Integer32 .1.3.6.1.4.1.43356.2.1.2.6.3.1.1 |
mimosaChannelModeSpecifies the mode for the given channel. The transmit or receive values indicate Frequency Diversity (FD) mode is in use. The bidirectional value means that the channel is used for both transmit and receive in all other single or dual channel modes.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.6.3.1.2 |
mimosaChannelWidthSpecifies the channel width of the given channel.ro Integer32 UNITS "MHz" .1.3.6.1.4.1.43356.2.1.2.6.3.1.3 |
mimosaChannelTxPowerSpecifies the transmit power level on the channel. If Channel Width is set to 1xN MHz, Channel 2 is not be used. In Frequency Diversity mode, Power 1 and Power 2 represent transmit power on the local and remote sides, respectively.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.43356.2.1.2.6.3.1.4 |
mimosaChannelCenterFreqSpecifies the center frequency of the channel used on the link. In all modes, the center frequency represents the absolute center of the selected channel width without any offset, and the center can be moved in 5 MHz increments. A value of 0 means this particular channel is not a valid entry.ro Integer32 UNITS "MHz" .1.3.6.1.4.1.43356.2.1.2.6.3.1.5 |
mimosaAntennaGainThe antenna gain on the Mimosa device.ro Integer32 UNITS "dBi" .1.3.6.1.4.1.43356.2.1.2.6.4 |
mimosaTotalTxPowerThe total transmit power for all the channels on the Mimosa device.ro DecimalOne UNITS "dBm" .1.3.6.1.4.1.43356.2.1.2.6.5 |
mimosaTotalRxPowerThe total receive power for all the channels on the Mimosa device.ro DecimalOne UNITS "dBm" .1.3.6.1.4.1.43356.2.1.2.6.6 |
mimosaTargetSignalStrengthThe calculated target receive signal strength based on device coordinates and settings.ro Integer32 UNITS "dB" .1.3.6.1.4.1.43356.2.1.2.6.7 |
mimosaPerfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.7 |
mimosaPhyTxRateThe transmit packet rate at the physical level over a 5 second interval.ro DecimalTwo UNITS "kbps" .1.3.6.1.4.1.43356.2.1.2.7.1 |
mimosaPhyRxRateThe receive packet rate at the physical level over a 5 second interval.ro DecimalTwo UNITS "kbps" .1.3.6.1.4.1.43356.2.1.2.7.2 |
mimosaPerTxRateThe trasnmit Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.ro DecimalTwo UNITS "%" .1.3.6.1.4.1.43356.2.1.2.7.3 |
mimosaPerRxRateThe receive Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.ro DecimalTwo .1.3.6.1.4.1.43356.2.1.2.7.4 |
mimosaServices OBJECT IDENTIFIER .1.3.6.1.4.1.43356.2.1.2.8 |
mimosaHttpsEnabledSpecifies whether HTTPS is enabled on the Mimosa device.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.8.1 |
mimosaMgmtVlanEnabledSpecifies whether the Management VLAN is enabled on the Mimosa device.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.8.2 |
mimosaMgmtCloudEnabledSpecifies whether the Management Cloud is enabled on the Mimosa device.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.8.3 |
mimosaRestMgmtEnabledSpecifies whether the REST management is enabled on the Mimosa device.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.8.4 |
mimosaPingWatchdogEnabledSpecifies whether the IP Ping watchdog is enabled on the Mimosa device. This is used to reset the device if a configured IP address is not reached in certain number of retries.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.8.5 |
mimosaSyslogEnabledSpecifies whether the Syslog client is enabled on the Mimosa device. Syslog client sends the log messages to configured syslog server.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.8.6 |
mimosaNtpModeSpecifies whether the NTP client is configured to use standard servers from NIST, NTP organizations or custom NTP server.ro Enumeration .1.3.6.1.4.1.43356.2.1.2.8.7 |
mimosaNtpServerSpecifies the name or address of the custom NTP server.ro DisplayString .1.3.6.1.4.1.43356.2.1.2.8.8 |
mimosaB5ModuleMimosa device MIB definitions MODULE-IDENTITY .1.3.6.1.4.1.43356.2.4.1 |