MERU-CONFIG-PACKETCAPTURE-MIB
The MERU-CONFIG-PACKETCAPTURE-MIB configures packet capture parameters, including filter rules, buffer sizes, and trigger conditions, on Meru WLAN access points and controllers to facilitate network traffic analysis and troubleshooting.
Imported Objects
Objects
22 total| Object Name |
|---|
mwConfigPacketCaptureThis MIB defines all the managed objects used to manage the Meru WLAN Packet Capture Configuration infrastructure MODULE-IDENTITY .1.3.6.1.4.1.15983.1.1.4.17 |
mwPacketCaptureProfileTableThis object describes AP Packet Capture SEQUENCE OF MwPacketCaptureProfileEntry .1.3.6.1.4.1.15983.1.1.4.17.1 |
mwPacketCaptureProfileEntryThis object describes AP Packet Capture MwPacketCaptureProfileEntry .1.3.6.1.4.1.15983.1.1.4.17.1.1 |
mwPacketCaptureProfileTableIndexThe index value of the table Integer32 .1.3.6.1.4.1.15983.1.1.4.17.1.1.1 |
mwPacketCaptureProfileNameThis object describes Profile Namerw DisplayString .1.3.6.1.4.1.15983.1.1.4.17.1.1.2 |
mwPacketCaptureProfileStatusThis object describes Enable/Disablerw MwlEnableDisableOption (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.3 |
mwPacketCaptureProfileConnectivityModeThis object describes L2/L3 Moderw MwlPacketCaptureMode (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.4 |
mwPacketCaptureProfileDestinationIpThis object describes Destination IP Addressrw IpAddress .1.3.6.1.4.1.15983.1.1.4.17.1.1.5 |
mwPacketCaptureProfileUDPPortThis object describes UDP Destination Portrw Unsigned32 .1.3.6.1.4.1.15983.1.1.4.17.1.1.6 |
mwPacketCaptureProfileDestinationMacThis object describes Destination MAC for L2 Moderw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.7 |
mwPacketCaptureProfileRxTxThis object describes Rx only/Tx only/Bothro MwlRxTxOption (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.8 |
mwPacketCaptureProfileRateLimitModeThis object describes Rate Limiting per station or cumulativerw MwlRateLimitMode (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.9 |
mwPacketCaptureProfileTokenBucketRateThis object describes Token Bucket Raterw Unsigned32 .1.3.6.1.4.1.15983.1.1.4.17.1.1.10 |
mwPacketCaptureProfileTokenBucketSizeThis object describes Token Bucket Sizerw Unsigned32 .1.3.6.1.4.1.15983.1.1.4.17.1.1.11 |
mwPacketCaptureProfileApListThis object describes AP Selection (ID)rw DisplayString .1.3.6.1.4.1.15983.1.1.4.17.1.1.12 |
mwPacketCaptureProfileFilterThis object describes Extended Filter Stringrw DisplayString .1.3.6.1.4.1.15983.1.1.4.17.1.1.13 |
mwPacketCaptureProfileInterfaceListThis object describes Interface Indexrw DisplayString .1.3.6.1.4.1.15983.1.1.4.17.1.1.14 |
mwPacketCaptureProfilePacketTruncationLengthThis object describes Packet Truncation Lengthrw Unsigned32 .1.3.6.1.4.1.15983.1.1.4.17.1.1.15 |
mwPacketCaptureProfileRateLimitingThis object describes Rate Limitingrw MwlOnOffSwitch (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.16 |
mwPacketCaptureProfileCaptureSiblingFramesThis object describes Capture Sibling Framesrw MwlOnOffSwitch (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.17 |
mwPacketCaptureProfileEncapsulationThis object describes Encapsulationrw MwlEncapsulationType (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.18 |
mwPacketCaptureProfileRowStatusThis object is used to create and delete rows in the tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.17.1.1.19 |
More MIBs from Meru
Browse all MeruMIBs →The MERU-GLOBAL-STATISTICS-MIB provides managed objects for monitoring aggregate performance counters and operational metrics across Meru WLAN infrastructure, including system-wide traffic volumes, client association statistics, and access point health indicators. This module enables centralized SNMP polling of global WLAN state data to facilitate capacity planning and fault detection within Meru wireless network deployments.
The MERU-TC MIB module provides the type definitions and common data structures required to monitor Meru WLAN infrastructure components, including access points, controllers, and associated radio interfaces. It establishes the foundational data types for tracking critical wireless metrics such as client association states, signal strength, interference levels, and throughput statistics across the Meru network architecture.
The MERU-CONFIG-WLAN-MIB provides managed objects for configuring Meru Networks WLAN infrastructure components, specifically enabling the monitoring and control of access point parameters, radio settings, and SSID definitions via SNMP.
The MERU-CONFIG-AP-MIB module provides SNMP managed objects for configuring and monitoring Meru WLAN access point infrastructure parameters, including radio settings, SSID definitions, and AP operational states. It enables centralized management of Meru-specific AP configuration attributes via the SNMP protocol.
SNMP MIB module
SNMP MIB module