MERU-CONFIG-MACFILTERING-MIB
The MERU-CONFIG-MACFILTERING-MIB enables SNMP-based configuration and management of MAC address filtering policies on Meru WLAN access points and controllers. It provides managed objects to define, modify, and monitor the specific allowlist and blocklist rules that control wireless client access based on hardware addresses.
Imported Objects
Objects
17 total| Object Name |
|---|
mwConfigMacFilteringThis MIB defines all the managed objects used to manage the Meru WLAN MAC Filtering Configuration infrastructure MODULE-IDENTITY .1.3.6.1.4.1.15983.1.1.4.6 |
mwAcl OBJECT IDENTIFIER .1.3.6.1.4.1.15983.1.1.4.6.1 |
mwAclEnvStateThis object describes ACL Environment Staterw MwlAclEnvState (MERU-TC) .1.3.6.1.4.1.15983.1.1.4.6.1.1 |
mwAclRadiusProfileNameThis object describes RADIUS Profile Namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.6.1.2 |
mwAclSecondaryRadiusProfileNameThis object describes Secondary RADIUS Profile Namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.6.1.3 |
mwAclAccessAllowTableThis object describes ACL Allow Access Configuration SEQUENCE OF MwAclAccessAllowEntry .1.3.6.1.4.1.15983.1.1.4.6.2 |
mwAclAccessAllowEntryThis object describes ACL Allow Access Configuration MwAclAccessAllowEntry .1.3.6.1.4.1.15983.1.1.4.6.2.1 |
mwAclAccessAllowTableIndexThe index value of the table Integer32 .1.3.6.1.4.1.15983.1.1.4.6.2.1.1 |
mwAclAccessAllowMacThis object describes MAC Address. The value must not be 00:00:00:00:00:00rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.6.2.1.2 |
mwAclAccessAllowDescrThis object describes Descriptionrw DisplayString .1.3.6.1.4.1.15983.1.1.4.6.2.1.3 |
mwAclAccessAllowRowStatusThis object is used to create and delete rows in the tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.6.2.1.5 |
mwAclAccessDenyTableThis object describes ACL Deny Access Configuration SEQUENCE OF MwAclAccessDenyEntry .1.3.6.1.4.1.15983.1.1.4.6.3 |
mwAclAccessDenyEntryThis object describes ACL Deny Access Configuration MwAclAccessDenyEntry .1.3.6.1.4.1.15983.1.1.4.6.3.1 |
mwAclAccessDenyTableIndexThe index value of the table Integer32 .1.3.6.1.4.1.15983.1.1.4.6.3.1.1 |
mwAclAccessDenyMacThis object describes MAC Address. The value must not be 00:00:00:00:00:00rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.6.3.1.2 |
mwAclAccessDenyDescrThis object describes Descriptionrw DisplayString .1.3.6.1.4.1.15983.1.1.4.6.3.1.3 |
mwAclAccessDenyRowStatusThis object is used to create and delete rows in the tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.15983.1.1.4.6.3.1.5 |
More MIBs from Meru
Browse all MeruMIBs →The MERU-GLOBAL-STATISTICS-MIB provides managed objects for monitoring aggregate performance counters and operational metrics across Meru WLAN infrastructure, including system-wide traffic volumes, client association statistics, and access point health indicators. This module enables centralized SNMP polling of global WLAN state data to facilitate capacity planning and fault detection within Meru wireless network deployments.
The MERU-TC MIB module provides the type definitions and common data structures required to monitor Meru WLAN infrastructure components, including access points, controllers, and associated radio interfaces. It establishes the foundational data types for tracking critical wireless metrics such as client association states, signal strength, interference levels, and throughput statistics across the Meru network architecture.
The MERU-CONFIG-WLAN-MIB provides managed objects for configuring Meru Networks WLAN infrastructure components, specifically enabling the monitoring and control of access point parameters, radio settings, and SSID definitions via SNMP.
The MERU-CONFIG-AP-MIB module provides SNMP managed objects for configuring and monitoring Meru WLAN access point infrastructure parameters, including radio settings, SSID definitions, and AP operational states. It enables centralized management of Meru-specific AP configuration attributes via the SNMP protocol.
SNMP MIB module
SNMP MIB module