MEDIAHAWK-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MEDIAHAWK-MIB.
208
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
208 total| Object Name |
|---|
concurrentComputerCorporation OBJECT IDENTIFIER .1.3.6.1.4.1.1457 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1457 |
mhvsVPStreamChangedStatusTrap is issued when a stream is opened or closed or changes state
depending on the setting of mhvsVPStreamsTrapGeneration.
The trap contains the new state of the stream ('unknown' if closed) TRAP-TYPE .1.3.6.1.4.1.1457.0.50 |
mhvsVPResourcesSPChangedStatusTrap is issued when a Service Provider changes state
depending on the setting of mhvsVPResourcesTrapGeneration.
The trap identifies the SP and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.51 |
mhvsVPResourcesVPChangedStatusTrap is issued when a Video Pump changes state
depending on the setting of mhvsVPResourcesTrapGeneration.
The trap identifies the VP and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.52 |
mhvsVPResourcesDiskChangedStatusTrap is issued when a Disk Resource changes state
depending on the setting of mhvsVPResourcesTrapGeneration.
The trap identifies the Disk and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.53 |
mhvsVPResourcesDiskAttChangedStatusTrap is issued when a Disk Attachment changes state
depending on the setting of mhvsVPResourcesTrapGeneration.
The trap identifies the Disk Attachment and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.54 |
mhvsVPResourcesNetwChangedStatusTrap is issued when a Network Resource changes state
depending on the setting of mhvsVPResourcesTrapGeneration.
The trap identifies the Network Resource and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.55 |
mhvsVPResourcesNetwAttChangedStatusTrap is issued when a Network Attachment changes state
depending on the setting of mhvsVPResourcesTrapGeneration.
The trap identifies the Network Attachment and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.56 |
mhvsVPVideoChangedStatusTrap is issued when a video changes state
depending on the setting of mhvsVPVideoTrapGeneration.
The trap identifies the video and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.57 |
mhvsVPVideoInstChangedStatusTrap is issued when a video instance changes state
depending on the setting of mhvsVPVideoTrapGeneration.
The trap identifies the video instance and includes
its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.58 |
mhvsVPMenuChangedStatusTrap is issued when a menu changes state
depending on the setting of mhvsVPMenuTrapGeneration.
The trap identifies the menu and includes its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.59 |
mhvsVPMenuInstChangedStatusTrap is issued when a menu instance changes state
depending on the setting of mhvsVPMenuTrapGeneration.
The trap identifies the menu instance and includes
its new state TRAP-TYPE .1.3.6.1.4.1.1457.0.60 |
mhProcessStartTrap is issued when VEMon successfully started TRAP-TYPE .1.3.6.1.4.1.1457.0.101 |
mhProcessTerminationTrap is issued when VEMon has terminated TRAP-TYPE .1.3.6.1.4.1.1457.0.102 |
vpProcessStartTrap is issued when VPMon successfully started TRAP-TYPE .1.3.6.1.4.1.1457.0.103 |
vpProcessTerminationTrap is issued when VPMon has terminated TRAP-TYPE .1.3.6.1.4.1.1457.0.104 |
vpPartitionStateChangedTrap is issued when the mirror state has changed TRAP-TYPE .1.3.6.1.4.1.1457.0.105 |
mhEnvironmentFanFailureTrap is issued when A Fan has failed TRAP-TYPE .1.3.6.1.4.1.1457.0.106 |
mhEnvironmentPowerSupplyFailureTrap is issued when A Power Supply has failed TRAP-TYPE .1.3.6.1.4.1.1457.0.107 |
mhEnvironmentTemperatureAlarmTrap is issued when Over Temperature is detected TRAP-TYPE .1.3.6.1.4.1.1457.0.108 |
mediaHawkVideoServer OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1 |
mediaHawkVSVP OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.2 |
mhvsVPVideo OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.2.1 |
mhvsVPVideoTableTable listing the Videos on the Video Server. SEQUENCE OF MhvsVPVideoEntry .1.3.6.1.4.1.1457.1.2.1.2 |
mhvsVPVideoEntryEntry for table mhvsVPVideoTable MhvsVPVideoEntry .1.3.6.1.4.1.1457.1.2.1.2.1 |
mhvsVPVideoIndexUnique identifier of this videoro INTEGER .1.3.6.1.4.1.1457.1.2.1.2.1.1 |
mhvsVPVideoNameName of this videoro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.1.2.1.2 |
mhvsVPVideoNumCopiesNumber of copiesro Gauge .1.3.6.1.4.1.1457.1.2.1.2.1.3 |
mhvsVPVideoSizeSize in KBytes of the videoro INTEGER .1.3.6.1.4.1.1457.1.2.1.2.1.4 |
mhvsVPVideoNumOpenCurrent number of streams using this videoro Gauge .1.3.6.1.4.1.1457.1.2.1.2.1.5 |
mhvsVPVideoStatusStatus of the videorw Enumeration .1.3.6.1.4.1.1457.1.2.1.2.1.6 |
mhvsVPVideoContentSpaceSpace in KBytes of the content files belonging to the videoro INTEGER .1.3.6.1.4.1.1457.1.2.1.2.1.7 |
mhvsVPVideoIndexSpaceSpace in KBytes of the index files belonging to the videoro INTEGER .1.3.6.1.4.1.1457.1.2.1.2.1.8 |
mhvsVPVideoInstTableTable listing each instance of the Videos on the Video Server SEQUENCE OF MhvsVPVideoInstEntry .1.3.6.1.4.1.1457.1.2.1.3 |
mhvsVPVideoInstEntryEntry for table mhvsVPVideoInstTable MhvsVPVideoInstEntry .1.3.6.1.4.1.1457.1.2.1.3.1 |
mhvsVPVideoInstVideoIndexUnique identifier of this video. Set to mhvsVPVideoIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.1.3.1.1 |
mhvsVPVideoInstDiskIndexThe disk holding this instance. Set to mhvsVPResourcesDiskIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.1.3.1.3 |
mhvsVPVideoInstNumOpenCurrent number of streams using this video instancero Gauge .1.3.6.1.4.1.1457.1.2.1.3.1.4 |
mhvsVPVideoInstStatusThe status of this video instancerw Enumeration .1.3.6.1.4.1.1457.1.2.1.3.1.5 |
mhvsVPVideoInstPathPath to the video from the diskro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.1.3.1.6 |
mhvsVPVideoInstIndexThe index for this video instancero INTEGER .1.3.6.1.4.1.1457.1.2.1.3.1.7 |
mhvsVPVideoInstSizeSize in KBytes of the video instancero INTEGER .1.3.6.1.4.1.1457.1.2.1.3.1.8 |
mhvsVPVideoTrapGenerationControls when the mhvsVPVideoChangedStatus and
mhvsVPVideoInstChangedStatus traps are generated.
off => no traps are generated,
on => video or video instance changes staterw Enumeration .1.3.6.1.4.1.1457.1.2.1.4 |
mhvsVPResources OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.2.2 |
mhvsVPResourcesMaxStreamsThe maximum number of streams supported by the Video Serverro Gauge .1.3.6.1.4.1.1457.1.2.2.1 |
mhvsVPResourcesNumStreamsThe number of streams running on the Video Serverro Gauge .1.3.6.1.4.1.1457.1.2.2.2 |
mhvsVPResourcesMaxBandwidthThe maximum bandwidth in kbps supported by the Video Serverro Gauge .1.3.6.1.4.1.1457.1.2.2.3 |
mhvsVPResourcesBandwidthThe currently allocated bandwidth in kbps on the Video Serverro Gauge .1.3.6.1.4.1.1457.1.2.2.4 |
mhvsVPResourcesVPTableTable listing the Video Pumps on the Video Server. SEQUENCE OF MhvsVPResourcesVPEntry .1.3.6.1.4.1.1457.1.2.2.5 |
mhvsVPResourcesVPEntryEntry for table mhvsVPResourcesVPTable MhvsVPResourcesVPEntry .1.3.6.1.4.1.1457.1.2.2.5.1 |
mhvsVPResourcesVPIndexA unique number within the Video Server for the Video Pumpro INTEGER .1.3.6.1.4.1.1457.1.2.2.5.1.1 |
mhvsVPResourcesVPMaxThe maximum resources for this Video Pumpro Gauge .1.3.6.1.4.1.1457.1.2.2.5.1.2 |
mhvsVPResourcesVPUsedThe used resources for this Video Pumpro Gauge .1.3.6.1.4.1.1457.1.2.2.5.1.3 |
mhvsVPResourcesVPNumStreamsThe number of streams using this Video Pumpro Gauge .1.3.6.1.4.1.1457.1.2.2.5.1.4 |
mhvsVPResourcesVPStatusThe status of this Video Pumprw Enumeration .1.3.6.1.4.1.1457.1.2.2.5.1.5 |
mhvsVPResourcesVPConnectedIndicates whether this Video Pump is connected to the Video Serverro Enumeration .1.3.6.1.4.1.1457.1.2.2.5.1.6 |
mhvsVPResourcesVPHostIndexSet to spsHostsindex in spsHostsTablero INTEGER .1.3.6.1.4.1.1457.1.2.2.5.1.7 |
mhvsVPResourcesDiskTableTable listing the Disk Resources on the Video Server. SEQUENCE OF MhvsVPResourcesDiskEntry .1.3.6.1.4.1.1457.1.2.2.6 |
mhvsVPResourcesDiskEntryEntry for table mhvsVPResourcesDiskTable MhvsVPResourcesDiskEntry .1.3.6.1.4.1.1457.1.2.2.6.1 |
mhvsVPResourcesDiskIndexA unique number within the Video Server for the diskro INTEGER .1.3.6.1.4.1.1457.1.2.2.6.1.1 |
mhvsVPResourcesDiskNameThe name of the diskro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.2.6.1.2 |
mhvsVPResourcesDiskMaxThe maximum resources for this diskrw Gauge .1.3.6.1.4.1.1457.1.2.2.6.1.3 |
mhvsVPResourcesDiskUsedThe used resources for this diskro Gauge .1.3.6.1.4.1.1457.1.2.2.6.1.4 |
mhvsVPResourcesDiskNumStreamsThe number of streams using this diskro Gauge .1.3.6.1.4.1.1457.1.2.2.6.1.5 |
mhvsVPResourcesDiskStatusThe status of this diskrw Enumeration .1.3.6.1.4.1.1457.1.2.2.6.1.6 |
mhvsVPResourcesDiskMaxCapacityThe maximum capacity in KBytes of the content partition of this diskro INTEGER .1.3.6.1.4.1.1457.1.2.2.6.1.7 |
mhvsVPResourcesDiskUsedCapacityThe used capacity in KBytes of the content partition of this diskro INTEGER .1.3.6.1.4.1.1457.1.2.2.6.1.8 |
mhvsVPResourcesDiskMaxSysCapacityThe maximum capacity in KBytes of the /sys partition of this diskro INTEGER .1.3.6.1.4.1.1457.1.2.2.6.1.9 |
mhvsVPResourcesDiskUsedSysCapacityThe used capacity in KBytes of the /sys partition of this diskro INTEGER .1.3.6.1.4.1.1457.1.2.2.6.1.10 |
mhvsVPResourcesNetwTableTable listing the Network Resources on the Video Server. SEQUENCE OF MhvsVPResourcesNetwEntry .1.3.6.1.4.1.1457.1.2.2.7 |
mhvsVPResourcesNetwEntryEntry for table mhvsVPResourcesNetwTable MhvsVPResourcesNetwEntry .1.3.6.1.4.1.1457.1.2.2.7.1 |
mhvsVPResourcesNetwIndexA unique number within the Video Server for the networkro INTEGER .1.3.6.1.4.1.1457.1.2.2.7.1.1 |
mhvsVPResourcesNetwMaxThe maximum resources for this networkrw Gauge .1.3.6.1.4.1.1457.1.2.2.7.1.3 |
mhvsVPResourcesNetwUsedThe used resources for this networkro Gauge .1.3.6.1.4.1.1457.1.2.2.7.1.4 |
mhvsVPResourcesNetwNumStreamsThe number of streams using this networkro Gauge .1.3.6.1.4.1.1457.1.2.2.7.1.5 |
mhvsVPResourcesNetwTypeThe type of this networkro Enumeration .1.3.6.1.4.1.1457.1.2.2.7.1.6 |
mhvsVPResourcesNetwIdThe id. of this network
For DVB or QAM, this is the TSID.
For CODEC, this is the Codec port number.
For ATM, this is the resource id..
For IP, this is a user-defined identifier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.2.7.1.7 |
mhvsVPResourcesNetwStatusThe status of this networkrw Enumeration .1.3.6.1.4.1.1457.1.2.2.7.1.8 |
mhvsVPResourcesSPTableTable listing the Service Providers on the Video Server. SEQUENCE OF MhvsVPResourcesSPEntry .1.3.6.1.4.1.1457.1.2.2.8 |
mhvsVPResourcesSPEntryEntry for table mhvsVPResourcesSPTable MhvsVPResourcesSPEntry .1.3.6.1.4.1.1457.1.2.2.8.1 |
mhvsVPResourcesSPIndexA unique number within the Video Server for the Service Providerro INTEGER .1.3.6.1.4.1.1457.1.2.2.8.1.1 |
mhvsVPResourcesSPMaxThe maximum resources (i.e. sessions) for this Service Providerro Gauge .1.3.6.1.4.1.1457.1.2.2.8.1.2 |
mhvsVPResourcesSPUsedThe used resources (i.e. sessions) for this Service Providerro Gauge .1.3.6.1.4.1.1457.1.2.2.8.1.3 |
mhvsVPResourcesSPStatusThe status of this Service Providerrw Enumeration .1.3.6.1.4.1.1457.1.2.2.8.1.4 |
mhvsVPResourcesSPConnectedIndicates whether this Service Provider is connected to the Video Serverro Enumeration .1.3.6.1.4.1.1457.1.2.2.8.1.5 |
mhvsVPResourcesSPHostIndexSet to spsHostsindex in spsHostsTablero INTEGER .1.3.6.1.4.1.1457.1.2.2.8.1.6 |
mhvsVPResourcesDiskAttTableTable listing the Disk Attachments on the Video Server. SEQUENCE OF MhvsVPResourcesDiskAttEntry .1.3.6.1.4.1.1457.1.2.2.9 |
mhvsVPResourcesDiskAttEntryEntry for table mhvsVPResourcesDiskAttTable MhvsVPResourcesDiskAttEntry .1.3.6.1.4.1.1457.1.2.2.9.1 |
mhvsVPResourcesDiskAttDiskIndexCorresponds to mhvsVPResourcesDiskIndex in mhvsVPResourcesDiskTablero INTEGER .1.3.6.1.4.1.1457.1.2.2.9.1.1 |
mhvsVPResourcesDiskAttVPIndexCorresponds to mhvsVPResourcesVPIndex in mhvsVPResourcesVPTablero INTEGER .1.3.6.1.4.1.1457.1.2.2.9.1.2 |
mhvsVPResourcesDiskAttDirThe mount-point of the disk on the hostro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.2.9.1.3 |
mhvsVPResourcesDiskAttStatusThe status of this disk to VP attachmentrw Enumeration .1.3.6.1.4.1.1457.1.2.2.9.1.4 |
mhvsVPResourcesDiskAttIndexIndex into list of attachments for this diskro INTEGER .1.3.6.1.4.1.1457.1.2.2.9.1.5 |
mhvsVPResourcesNetwAttTableTable listing the NetwAttork Resource Attachments on the Video Server. SEQUENCE OF MhvsVPResourcesNetwAttEntry .1.3.6.1.4.1.1457.1.2.2.10 |
mhvsVPResourcesNetwAttEntryEntry for table mhvsVPResourcesNetwAttTable MhvsVPResourcesNetwAttEntry .1.3.6.1.4.1.1457.1.2.2.10.1 |
mhvsVPResourcesNetwAttFromTypeCorresponds to mhvsVPResourcesNetwType in mhvsVPResourcesNetwTablero Enumeration .1.3.6.1.4.1.1457.1.2.2.10.1.1 |
mhvsVPResourcesNetwAttFromIndexCorresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTablero INTEGER .1.3.6.1.4.1.1457.1.2.2.10.1.2 |
mhvsVPResourcesNetwAttToTypeThe type of resource to which the network resource is attachedro Enumeration .1.3.6.1.4.1.1457.1.2.2.10.1.3 |
mhvsVPResourcesNetwAttToIndexIf mhvsVPResourcesNetwAttToType is vp, this corresponds to mhvsVPResourcesVpId in mhvsVPResourcesVPTable.
Otherwise, it corresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTablero INTEGER .1.3.6.1.4.1.1457.1.2.2.10.1.4 |
mhvsVPResourcesNetwAttStatusThe status of this network attachmentrw Enumeration .1.3.6.1.4.1.1457.1.2.2.10.1.5 |
mhvsVPResourcesNetwAttIndexIndex into list of attachments for this network resourcero INTEGER .1.3.6.1.4.1.1457.1.2.2.10.1.6 |
mhvsVPResourcesNetwAttNameName for this network attachmentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.2.10.1.7 |
mhvsVPResourcesTrapGenerationControls when the mhvsVPResources...ChangedStatus traps are generated.
off => no traps are generated,
on => resource changes staterw Enumeration .1.3.6.1.4.1.1457.1.2.2.11 |
mhvsVPStreams OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.2.3 |
mhvsVPStreamsTrapGenerationControls when the mhvsVPStreamChangedStatus trap is generated.
openClose => streams opened or closed,
stateChange => streams opened or closed or change staterw Enumeration .1.3.6.1.4.1.1457.1.2.3.1 |
mhvsVPStreamsVideoTableTable relating Video Instances to Stream Instances SEQUENCE OF MhvsVPStreamsVideoEntry .1.3.6.1.4.1.1457.1.2.3.2 |
mhvsVPStreamsVideoEntryEntry for table mhvsVPStreamsVideoTable MhvsVPStreamsVideoEntry .1.3.6.1.4.1.1457.1.2.3.2.1 |
mhvsVPStreamsVideoSSEIndexSet to spsStreamInstStreamSEIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.3.2.1.1 |
mhvsVPStreamsVideoSIIndexSet to spsStreamInstIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.3.2.1.2 |
mhvsVPStreamsVideoDiskIndexSet to mhvsVPVideoInstDiskIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.3.2.1.3 |
mhvsVPStreamsVideoVideoIndexSet to mhvsVPVideoInstVideoIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.3.2.1.4 |
mhvsVPStreamsNetwTableTable relating Network Resources to Stream Instances. SEQUENCE OF MhvsVPStreamsNetwEntry .1.3.6.1.4.1.1457.1.2.3.3 |
mhvsVPStreamsNetwEntryEntry for table mhvsVPStreamsNetwTable MhvsVPStreamsNetwEntry .1.3.6.1.4.1.1457.1.2.3.3.1 |
mhvsVPStreamsNetwSSEIndexCorresponds to spsStreamInstStreamSEIndex in spsStreamInstTablero INTEGER .1.3.6.1.4.1.1457.1.2.3.3.1.1 |
mhvsVPStreamsNetwSIIndexCorresponds to spsStreamInstIndex in spsStreamInstTablero INTEGER .1.3.6.1.4.1.1457.1.2.3.3.1.2 |
mhvsVPStreamsNetwNetwTypeCorresponds to mhvsVPResourcesNetwType in mhvsVPResourcesNetwTablero Enumeration .1.3.6.1.4.1.1457.1.2.3.3.1.3 |
mhvsVPStreamsNetwNetwIndexCorresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTablero INTEGER .1.3.6.1.4.1.1457.1.2.3.3.1.4 |
mhvsVPMenu OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.2.4 |
mhvsVPMenuTableTable listing the Menus on the Video Server. SEQUENCE OF MhvsVPMenuEntry .1.3.6.1.4.1.1457.1.2.4.2 |
mhvsVPMenuEntryEntry for table mhvsVPMenuTable MhvsVPMenuEntry .1.3.6.1.4.1.1457.1.2.4.2.1 |
mhvsVPMenuIndexUnique identifier of this menuro INTEGER .1.3.6.1.4.1.1457.1.2.4.2.1.1 |
mhvsVPMenuNameName of this menuro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.4.2.1.2 |
mhvsVPMenuNumCopiesNumber of copiesro Gauge .1.3.6.1.4.1.1457.1.2.4.2.1.3 |
mhvsVPMenuNumOpenCurrent number of streams using this menuro Gauge .1.3.6.1.4.1.1457.1.2.4.2.1.5 |
mhvsVPMenuStatusStatus of the menurw Enumeration .1.3.6.1.4.1.1457.1.2.4.2.1.6 |
mhvsVPMenuInstTableTable listing each instance of the Menus on the Video Server SEQUENCE OF MhvsVPMenuInstEntry .1.3.6.1.4.1.1457.1.2.4.3 |
mhvsVPMenuInstEntryEntry for table mhvsVPMenuInstTable MhvsVPMenuInstEntry .1.3.6.1.4.1.1457.1.2.4.3.1 |
mhvsVPMenuInstMenuIndexUnique identifier of this menu. Set to mhvsVPMenuIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.4.3.1.1 |
mhvsVPMenuInstDiskIndexThe disk holding this instance. Set to mhvsVPResourcesDiskIndex.ro INTEGER .1.3.6.1.4.1.1457.1.2.4.3.1.3 |
mhvsVPMenuInstNumOpenCurrent number of streams using this menu instancero Gauge .1.3.6.1.4.1.1457.1.2.4.3.1.4 |
mhvsVPMenuInstStatusThe status of this menu instancerw Enumeration .1.3.6.1.4.1.1457.1.2.4.3.1.5 |
mhvsVPMenuInstPathPath to the menu from the diskro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.2.4.3.1.6 |
mhvsVPMenuInstIndexThe index for this menu instancero INTEGER .1.3.6.1.4.1.1457.1.2.4.3.1.7 |
mhvsVPMenuTrapGenerationControls when the mhvsVPMenuChangedStatus and
mhvsVPMenuInstChangedStatus traps are generated.
off => no traps are generated,
on => menu or menu instance changes staterw Enumeration .1.3.6.1.4.1.1457.1.2.4.4 |
mediaHawkVEMon OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.3 |
mediaHawkVEMonAliveAlways 1. If VEMon is not running on the target system, a snmp
error or timeout will occur.ro Enumeration .1.3.6.1.4.1.1457.1.3.1 |
mediaHawkDVBTableTable listing the DVBs on the IVM. SEQUENCE OF MediaHawkDVBEntry .1.3.6.1.4.1.1457.1.3.2 |
mediaHawkDVBEntryEntry for table mediaHawkDVBTable MediaHawkDVBEntry .1.3.6.1.4.1.1457.1.3.2.1 |
mhDVBStatus'1' if the DVB-ASI card is on-line and operational, '0' if not.ro Enumeration .1.3.6.1.4.1.1457.1.3.2.1.1 |
mhDVBNameThe device name of the DVB-ASI software device, currently either 'gi0' or 'mh0'.ro DisplayString .1.3.6.1.4.1.1457.1.3.2.1.2 |
mhDVBMTUThe MTU (maximum transmission unit) size for the DVB card Interface.ro INTEGER .1.3.6.1.4.1.1457.1.3.2.1.3 |
mhDVBReceivePacketsTotal packets received by this DVB-ASI card. Normally 0.ro INTEGER .1.3.6.1.4.1.1457.1.3.2.1.4 |
mhDVBReceiveErrorsReceive errors detected by this DVB-ASI card. Normally 0.ro INTEGER .1.3.6.1.4.1.1457.1.3.2.1.5 |
mhDVBTransmitPacketsTotal packets transmitted by this DVB-ASI card since the system was
last restarted. Packets are 48128 bytes long.ro INTEGER .1.3.6.1.4.1.1457.1.3.2.1.6 |
mhDVBTransmitErrorsTotal number of transmit errors detected by this DVB-ASI card since
the system was last restarted.ro INTEGER .1.3.6.1.4.1.1457.1.3.2.1.7 |
mhDVBTransmitKBytesPerSecAverage number of 1K bytes transferred per second over the last 10
seconds for this DVB-ASI card.ro INTEGER .1.3.6.1.4.1.1457.1.3.2.1.8 |
mediaHawkDisk OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.3.3 |
mhDiskNumDisksTotal number of disk drives accessible to this CPU.
Determines the number of entries in the following disk information variables.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.1 |
mhDiskKBytesPerSecTotal number of Kilobytes per second of disk activity from this particular CPU
from all drives connected to it. Averaged over the last 10 seconds.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.2 |
mhDiskDrivesTableTable listing the Disk Drives on the IVM. SEQUENCE OF MhDiskDrivesEntry .1.3.6.1.4.1.1457.1.3.3.3 |
mhDiskDrivesEntryEntry for table mhDiskDrivesTable MhDiskDrivesEntry .1.3.6.1.4.1.1457.1.3.3.3.1 |
mhDiskDriveNameReturns a string identifying the particular drive. The first 3 characters
give the controller name, the next digit is the controller number. This
is followed by a logical drive number. I.e. fib0_12. This drive number
does not correspond to any other value in this MIB.ro DisplayString .1.3.6.1.4.1.1457.1.3.3.3.1.1 |
mhDiskDriveReadsThe total number of read commands issued to the drive from this system
since the system was booted.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.3.1.2 |
mhDiskDriveWritesThe total number of write commands issued to the drive from this system
since the system was booted.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.3.1.3 |
mhDiskDriveReadKBytesThe total quantity of data read since the system was booted
off of the specified drive. Counted in units of 1024 bytes.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.3.1.4 |
mhDiskDriveWriteKBytesThe total quantity of data written to the specified drive since
the system was booted. Counted in units of 1024 bytes.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.3.1.5 |
mhDiskDriveReadKBytesPerSecAverage number of bytes read off of the specified drive from this system
measured in units of 1024 bytes. This average is over the last 5 seconds.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.3.1.6 |
mhDiskDriveWriteKBytesPerSecAverage number of bytes written to the specified drive from this system
measured in units of 1024 bytes. This average is over the last 5 seconds.ro INTEGER .1.3.6.1.4.1.1457.1.3.3.3.1.7 |
mhContentMountedReturns an integer to indicate that the Video Content disk partition is mounted and on-line.
A 1 indicates that the content is on-line, a 0 indicates it is not.ro Enumeration .1.3.6.1.4.1.1457.1.3.3.4 |
mediaHawkEnvironment OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.3.4 |
mhEnvironmentFanTableTable listing the Fans on the IVM. SEQUENCE OF MhEnvironmentFanEntry .1.3.6.1.4.1.1457.1.3.4.1 |
mhEnvironmentFanEntryEntry for table mhEnvironmentFanTable MhEnvironmentFanEntry .1.3.6.1.4.1.1457.1.3.4.1.1 |
mhEnvironmentFanLocationReturns a string indicating the Video Array ID followed by the number, such
As '1A,0' for the first fan, '1A,2' for the third fan, etc.ro DisplayString .1.3.6.1.4.1.1457.1.3.4.1.1.1 |
mhEnvironmentFanStatusReturns an integer of either 0 if the fan has failed or 1 if the
fan is working properly.ro Enumeration .1.3.6.1.4.1.1457.1.3.4.1.1.2 |
mhEnvironmentPowerSupplyTableTable listing the Power Supplies on the IVM. SEQUENCE OF MhEnvironmentPowerSupplyEntry .1.3.6.1.4.1.1457.1.3.4.2 |
mhEnvironmentPowerSupplyEntryEntry for table mhEnvironmentPowerSupplyTable MhEnvironmentPowerSupplyEntry .1.3.6.1.4.1.1457.1.3.4.2.1 |
mhEnvironmentPowerSupplyLocationReturns a string indicating the Video Array ID followed by the number, such
as '1A,0' for the left supply, '1A,2' for the right supply, etc.ro DisplayString .1.3.6.1.4.1.1457.1.3.4.2.1.1 |
mhEnvironmentPowerSupplyStatusReturns an integer as follows: -1 if the power supply is missing or not
plugged in, 0 if the power supply has failed, or 1 if the power supply is
working properly.ro Enumeration .1.3.6.1.4.1.1457.1.3.4.2.1.2 |
mhEnvironmentTemperatureTableTable listing the Temperature sensors on the IVM. SEQUENCE OF MhEnvironmentTemperatureEntry .1.3.6.1.4.1.1457.1.3.4.3 |
mhEnvironmentTemperatureEntryEntry for table mhEnvironmentTemperatureTable MhEnvironmentTemperatureEntry .1.3.6.1.4.1.1457.1.3.4.3.1 |
mhEnvironmentTemperatureLocationReturns a string indicating the location of the related temperature sensor,
such as 'Inlet LR' for lower right air inlet sensor.ro DisplayString .1.3.6.1.4.1.1457.1.3.4.3.1.1 |
mhEnvironmentTemperatureValueReturns the temperature of the related sensor, in degrees C.ro INTEGER .1.3.6.1.4.1.1457.1.3.4.3.1.2 |
mhEnvironmentTemperatureRedLineReturns the maximum permissible temperature of the related sensor, in
In degrees C. Temperatures over this value may cause a system failure.ro INTEGER .1.3.6.1.4.1.1457.1.3.4.3.1.3 |
mediaHawkVideoEngineHealthReturns a 1, 2, or 3 for the health of the addressed engine. 1 is red
(something is down); 2 = yellow; 3 = green. Checks status of DVB card, etc.ro Enumeration .1.3.6.1.4.1.1457.1.3.5 |
mediaHawkArrayHealthReturns a 1, 2, or 3 for the health of the overall video array.
1 is red; (something is down); 2 = yellow; 3 = green.
Checks particular engine to which the value is addressed, along with the health
of the disks, power supplies, fans, etc.ro Enumeration .1.3.6.1.4.1.1457.1.3.6 |
mediaHawkShutdownA writable variable used to request a particular engine or full video array
to shutdown or restart. Passes a string indicating the engine or array
followed by a code indicating the function to perform.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.3.7 |
mediaHawkDiskDisableA writable variable used to request a particular disk drive
to be disabled and spun down. Passes a string indicating the array
followed by the drive position, such as 1A2.3. Returns a string
indicating status of the operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.3.8 |
mediaHawkDiskEnableA writable variable used to request a particular disk drive
to be enabled and spun up. Passes a string indicating the array
followed by the drive position, such as 1A2.3. Returns a string
indicating status of the operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.3.9 |
mediaHawkVPMon OBJECT IDENTIFIER .1.3.6.1.4.1.1457.1.4 |
mediaHawkVPMonAliveAlways 1. If VPMon is not running on the target system, a snmp
error or timeout will occur.ro Enumeration .1.3.6.1.4.1.1457.1.4.1 |
mhPartitionLastUnitReturns last currently configured Virtual Partition number. A
value of -1 indicates that there are currently no configured
virtual partitions in the target system.ro INTEGER .1.3.6.1.4.1.1457.1.4.2 |
mhPartitionCountReturns the maximum number of virtual partitions that may be
configured in the target system. A value of 0 indicates that
the Virtual Partition driver has not been configured into the
kernel.ro INTEGER .1.3.6.1.4.1.1457.1.4.3 |
mhPartitionsTableTable listing the Partitions on the IVM. SEQUENCE OF MhPartitionsEntry .1.3.6.1.4.1.1457.1.4.4 |
mhPartitionsEntryEntry for table mhPartitionsTable MhPartitionsEntry .1.3.6.1.4.1.1457.1.4.4.1 |
mhPartitionNameReturns the path name of the raw device associated with VP unit 'N'.
Examples:
mhPartitionName.0 Returns '/dev/rdsk/vp0'
mhPartitionName.1 Returns '/dev/rdsk/vp1'.ro DisplayString .1.3.6.1.4.1.1457.1.4.4.1.1 |
mhPartitionTypeReturns current configuration of VP unit 'N'.
Legal values are:
'unconfigured' partition has not been configured
'mirror' configured as a mirrored device
'stripe' configured as a striped device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.2 |
mhPartitionStateReturns the current state of VP unit 'N'.
Legal values are:
'unconfigured' partition has not been configured
'striped' configured as a striped device
'verifying' mirror is currently synchronized and
is executing a mirror integrity check.
'restoring' mirror is currently being restored.
'synchronized mirror is currently synchronized.
'primary disk failure'
a primary disk failure has caused the
mirror to loose synchronization. The
primary disk device requires maintenance.
'secondary disk failure'
a secondary disk failure has caused the
mirror to loose synchronization. The
secondary disk device requires maintenance.
'primary+secondary disk failure'
'tertiary disk failure'
'primary+tertiary disk failure'
'secondary+tertiary disk failure'
'triple disk failure'
'unsynchronized' the mirror is not synchronized and needs
to be restored. This state occurs as a
result of a system panic or hang, not as
a result of a disk failure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.3 |
mhPartitionActiveReadCountReturns the current number of outstanding read requests on VP unit 'N'.ro INTEGER .1.3.6.1.4.1.1457.1.4.4.1.4 |
mhPartitionActiveWriteCountReturns the current number of outstanding write requests on VP unit 'N'.ro INTEGER .1.3.6.1.4.1.1457.1.4.4.1.5 |
mhPartitionTotalErrorsThe total number of I/O errors on VP unit 'N' since system initialization.ro INTEGER .1.3.6.1.4.1.1457.1.4.4.1.6 |
mhPartitionSliceSizeIf mhPartitionType='stripe', this is the stripe size as defined
by vpinit(1m). Otherwise, a 0 is returned.ro INTEGER .1.3.6.1.4.1.1457.1.4.4.1.7 |
mhPartitionSizeKbytesThe size, in kilobytes, of this VP is returned.ro INTEGER .1.3.6.1.4.1.1457.1.4.4.1.8 |
mhPartitionReaderModenone The VP is not a mirror.
primary When this mirror is synchronized, all
read requests will be scheduled exclusively
to the primary partition.
secondary When this mirror is synchronized, all
read requests will be scheduled exclusively
to the secondary partition.
distributed When this mirror is synchronized, all
read requests will be distributed between
the two partitions.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.9 |
mhPartitionWriterMode-1 The VP is not a mirror.
0 When this mirror is synchronized, the first
write to this device will result in the
on-disk state of the mirror to be marked
'dirty'. The final close(2) of this VP
will result in the VP being marked 'clean'.
These on-disk states are used during system
crash recover to maintain the integrity of
the mirror.
>0 When this mirror is synchronized, the first
write to this VP.rw INTEGER .1.3.6.1.4.1.1457.1.4.4.1.10 |
mhPartitionRestoreThrottleDuring a mirrored restore or verify operation, an artificial delay
may be performed between each read/write (restore) or read/read
(verify) sequence. This value is the number of microseconds to
delay. Note that the VP driver converts this value into a number
of clock 'ticks', so microsecond resolution is not actually possible.
Specifying a delay between 1 and 16666 results in a 1 tick delay,
between 16667 and 33333 results in a 2 tick delay, etc.
0 No delay is performed. This results in the fastest
possible restoration/verification of the mirror
at the expense of I/O bandwidth.
>0 The specified delay is performed. This lengthens
the restoration/verification process, but is more
friendly to other transfers which are taking place
on the same controller(s).rw INTEGER .1.3.6.1.4.1.1457.1.4.4.1.11 |
mhPartitionProgressMeterDuring a mirrored restore or verify operation, this value
indicates the completion percentage. This value is always
between '0.0%' and '100.0%'. A synchronized mirror will
report this value as '100.0%'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.12 |
mhPartitionMemberCountReturns the number of sub-devices which comprise this VP unit.
Unconfigured VPs return 0, mirror VPs return 2, and striped
VP return the number of striped partitions.ro INTEGER .1.3.6.1.4.1.1457.1.4.4.1.13 |
mhPartitionMemberDevicesReturns the names of the sub-devices which comprise this VP unit.
Normally, the named devices are the same as found in /dev/dsk.
For example: 3s0 4s0.
In the event that the device node for the configured device cannot
be located, the major and minor number will be returned (this is
very unlikely to happen). For example: 101,57856.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.14 |
mhPartitionStartRestoreReturns a 1 if a restore or verify operation is currently in
progress, or a 0 if not.
This option can be used to initiate a repair, restore, or verify
operation as follows:
1 Repair (vpinit -R equivalent)
2 Restore (vpinit -r equivalent)
3 Repair and Restore (vpinit -Rr equivalent)
4 Verify (vpinit -t equivalent)
All other set values are silently ignored.rw INTEGER .1.3.6.1.4.1.1457.1.4.4.1.15 |
mhPartitionCancelRestoreWhen read, returns a 0.
When set to a value of 1, the currently executing restore or
verify operation is terminated. This operation is ignored
if any value other than 1 is set, or if the specified VP
device is not currently restoring or verifying the mirror.rw INTEGER .1.3.6.1.4.1.1457.1.4.4.1.16 |
mpPartitionErrorMaskReturns an integer value [0..7] which represents a bitmask
of member devices which have reported an I/O error. This
value is a logical 'or' of all errant partition members.
The bitmask is encoded as follows:
0 No members have reported a failure (green).
1 Primary member failure (yellow).
2 Secondary member failure (yellow).
3 Primary and secondary member failures (red).
4 Tertiary member failure (yellow).
5 Primary and tertiary member failures (red).
6 Secondary and tertiary member failures (red).
7 Primary, secondary and tertiary member failures (red).rw INTEGER .1.3.6.1.4.1.1457.1.4.4.1.17 |
mhPartitionHealthReturns a string which indicates the overall health
of the VP subsystem:
none This device is not a mirror.
red A double or triple drive failure has occurred.
yellow A single drive fault has occurred on the mirrored set.
green All members of the mirror are synchronized.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.18 |
mhPartitionRestoreStatusReturns a string which indicates the restore/verify status
associated with either the current, or last, restore/verify
operation performed.
NOTE: This status does NOT reflect the current status of the
mirror. This is simply a historical log of the last
restore or verify command which started execution on
the associated VP device. For example, this status
may report a successfully executed restore operation
but the mirror may have lost synchronization in the
time period since the execution of the restore.
The possible strings that can be returned are:
restore/verify not run since reboot
The restore/verify status is not persistent over
kernel reboots. This status is returned whenever
the restore or verify commands have not been issued
since the last reboot.
restore successful
The last command issued to this VP was a restore
which was successful.
verify successful
The last command issued to this VP was a verify
which was successful.
restore cleared read errors
The restore cleared the VP's read error counters.
A physical restore operation was not performed.
restore operation active
A restore operation is currently active on this VP.
verify operation active
A verify operation is currently active on this VP.
restore was canceled
A restore operation was started but the canceled
at the user's request.
verify was canceled
A verify operation was started but the canceled
at the user's request.
mirror needs repair
A restore operation was attempted on a mirror that
need to be repaired.
memory allocation failure
Buffer allocation necessary to perform a restore or
verify operation were not available.
cannot verify a 'forced' mirror
A verify operation was attempted on a mirror that
was created using the 'force' option. Since the
mirror was never synchronized on a block-by-block
basis, the verify operation is expected to fail.
synchronization was lost during verify
The verify operation was aborted due to a loss of
synchronization. The error causing the loss of
synchronization was not associated with the verify
operation (an external event caused the loss).
error reading primary device
A restore or verify command aborted due to a read
error on the primary device during the operation.
error writing primary device
A restore command aborted due to a write error on
the primary device during the restore operation.
error reading secondary device
A restore or verify command aborted due to a read
error on the secondary device during the operation.
error writing secondary device
A restore command aborted due to a write error on
the secondary device during the restore operation.
error accessing tertiary device
A restore or verify command aborted due to failure
either communicating with a Loop B client system or
because of a read or write error on the tertiary
device.
verify error
A verify error occured between the primary and secondary
mirrored device.
tertiary device verify error
A verify error occured between the primary and tertiary
mirrored device.
status unavailable
The restore status returned was invalid.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.19 |
mhPartitionRestoreDateReturns the date and time of the last partition restore, in
DateAndTime format of 11 octets.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.20 |
mhPartitionMountPointReturns a string denoting the mount-point name if this
partition is the mount point for any file system. A null string
is returned if this partition is not a mount point. MediaHawk
Model 2000 Systems only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.4.1.21 |
mhPartitionFreeSpaceApplicable only if previous entry (mount point) returns a
non-null string. Returns an integer from 0 to 99 indicating
the percentage of free space in this partition. MediaHawk
Model 2000 Systems only.ro INTEGER .1.3.6.1.4.1.1457.1.4.4.1.22 |
mhVPSubsystemHealthReturns a string which indicates the overall health
of the VP subsystem:
none There are no mirrors confgiured.
red At least one partition has reported a
double or triple drive failure.
yellow At least one partition has reported a
single member fault.
green All partitions are synchronized .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1457.1.4.5 |