MC2350-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
537
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
537 total| Object Name |
|---|
minolta OBJECT IDENTIFIER .1.3.6.1.4.1.2590 |
SNMPv2-TC Unknown .1.3.6.1.4.1.2590 |
mltMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1 |
mltMib OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1 |
mltSystem OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1 |
mltPrinter OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1 |
mltPrinterMib OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1.6 |
mltPrtMibInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1.6.1 |
mltPrtMibVersionThe standardization version of MIB implemented in a printer.
This indicates the version of the Private Printer
MIB that is implemented.
There are some mib objects that indicate the Mib Version.
(mltSysMibVersion, mltPrtMibVersion, mltScnMibVersion,
mltNetMibVersion, mltJmMibVersion) But, the each mib version
should be same version.
Especially, the each major versions must be same.
A string specifying Printer MIB Standard specification
version. General form is ##.XX.
## is indicating major revision, and XX is
minor revision. Decimal point is ASCII-coded period.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.1.1 |
mltPrtCommand OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1.6.4 |
mltPrtCommandTableThe table for showing the command information of
printer relation. This table must be implemented
even if no function in this table are supported
by a model. SEQUENCE OF MltPrtCommandEntry .1.3.6.1.4.1.2590.1.1.1.1.6.4.1 |
mltPrtCommandEntryAn entry exists in this table for each
device entry in the hostmib device table whose type
is 'printer'. MltPrtCommandEntry .1.3.6.1.4.1.2590.1.1.1.1.6.4.1.1 |
mltPrtCommandOnlineIndicate printer online or offline.
If printer has no online button,
this value should be notSupported (0) as read-only.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.4.1.1.1 |
mltPrtCommandJobCancelCommand of cancel job.
If printer has not job cancel function,
this value should be notSupported (0) as read-only.
In normal condition, this value should
be notCancel (1). If canceling job,
set this object jobCancel (2).rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.4.1.1.2 |
mltPrtCommandJobProceedCommand of proceeds.
If printer has not proceed function,
this value should be notSupported (0) as read-only.
In normal condition, this value should
be notProceed (1). If proceeding job,
set this object proceed (2).rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.4.1.1.3 |
mltPrtPrintPageTableA table of printable configuration print.
If a printer does not support print the test pages
from network access, this table needs not to be implemented. SEQUENCE OF MltPrtPrintPageEntry .1.3.6.1.4.1.2590.1.1.1.1.6.4.2 |
mltPrtPrintPageEntryInformation about printer's configuration prints.
Entries may exist in the table for each device
index whose device type is 'printer'. MltPrtPrintPageEntry .1.3.6.1.4.1.2590.1.1.1.1.6.4.2.1 |
mltPrtPrintPageIndexIndex for uniquely distinguishing the page held within a printer.
Although the value of index depends on an implementation,ro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.4.2.1.1 |
mltPrtPrintPageNameThe name of the page, which can be printed.
The value that should be implemented depends
on an implementation of a model and it should
be common with a manual etc.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.4.2.1.2 |
mltPrtPrintCommandCommand of print page.
In normal condition , this value should
be supported (1).
If print page, set this object print (2).rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.4.2.1.3 |
mltPrtConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1.6.5 |
mltPrtSysConfigTableA table of configurations for printer.
This table must be implemented even if
no functions in this table are supported. SEQUENCE OF MltPrtSysConfigEntry .1.3.6.1.4.1.2590.1.1.1.1.6.5.1 |
mltPrtSysConfigEntryAn entry exists in this table for each
device entry in the hostmib device table whose type
is 'printer'. MltPrtSysConfigEntry .1.3.6.1.4.1.2590.1.1.1.1.6.5.1.1 |
mltPrtJobLanguageConfiguration printer job language.
Only in the case that a printer has a function of
setting(changing) this default printer language,
this object is implemented as RW.
In the other case, this object should be implemented as RO.
In case of PCL/PS printer, default value is Auto(0).
If necessary, PCL(1)/PS(2) is changeable.
In case of printer has only one interpreter (PCL or PS),
this object should be pcl(1) or ps (2) as RO.
In case of GDI printer, this value is GDI(3) (RO).rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.5.1.1.1 |
mltPrtPowerSaveTimer value setting before the power save mode is
asserted. Unit is minutes.
If '0' is selected, the controller doesn't enter
Power Save mode.
If this value is -1, printer doesn't support power save mode.
If out of spec value is set, Error is returned.rw INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.5.1.1.2 |
mltPrtAutoContinueThe setting whether printing will automatically
recover or not when an Error or Caution occurred.
If a device support only the value of 1(off) and 2(ac0Sec),
this implementation is allowed.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.5.1.1.3 |
mltPrtPaperTimeOutSetting which decides whether automatic recover
should be proceed or not when an error related to paper
occurred.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.5.1.1.4 |
mltPrtPsErrorPrintThe setting whether the printer prints PostScript Error
Page when PostScript Error occurred during job processing.
About PS error, since it is the function of a printer
controller, all the devices with PS should be implemented
If a device has no PostScript interpreter, this value
should be always notSupported(0) as RO.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.5.1.1.5 |
mltPrtPrintConfigTableA table of configurations for printer.
This table must be implemented even if
no functions in this table are supported. SEQUENCE OF MltPrtPrintConfigEntry .1.3.6.1.4.1.2590.1.1.1.1.6.5.2 |
mltPrtPrintConfigEntryAn entry exists in this table for each
device entry in the hostmib device table whose type
is 'printer' MltPrtPrintConfigEntry .1.3.6.1.4.1.2590.1.1.1.1.6.5.2.1 |
mltPrtCopiesThe number of printing copies.
If set value is over limit, printer should return error.
About device which has no PCL interpreter,
This value should be -1, because of no default copies setting.rw INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.5.2.1.1 |
mltPrtPaperSizePaper size of printing.
The value of the mltPaperSizeIndex corresponding to
the current paper size.
About device which has no PCL interpreter,
This value should be -1, because of no default paper size setting.rw INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.5.2.1.2 |
mltPrtPaperSourceFeeders for printing.
The value of prtInputIndex corresponding to the default
input sub-unit: that is, this object selects the default
source of input media.
If value is 0, this means 'Auto'.
About device which has no PCL interpreter,
This value should be -1, because of no default paper source setting.rw INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.5.2.1.3 |
mltPrtFineArtSmooting setting.
If printer has no smoothing function, this value should
be notSupported(0) and RO.
If printer supports only On/Off , this value should be
on(1) or offSwitch(2).
If printer supports 4 steps, this value should be
dark(3), medium(4), light(5) and offStep(6).rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.5.2.1.4 |
mltPrtTonerSaveToner saving setting.
If printer is not supporting toner save function,
this value should be notSupported(0) and RO.
If printer is supporting toner save function,
this value should be on(1) or off(2) and RW.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.5.2.1.5 |
mltPrtFont OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1.6.6 |
mltPrtPclFontTableThis table shows PCL font information of printer has.
Since it is a function peculiar to PCL, it is not necessary
to implement this table in the device in which PCL is not
installed or PCL font management function is not installed. SEQUENCE OF MltPrtPclFontEntry .1.3.6.1.4.1.2590.1.1.1.1.6.6.1 |
mltPrtPclFontEntryInformation about printer's PCL fonts.
Entries may exist in the table for each device
index whose device type is 'printer'. MltPrtPclFontEntry .1.3.6.1.4.1.2590.1.1.1.1.6.6.1.1 |
mltPrtPclFontIndexA unique value used to identify this entry.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.6.1.1.1 |
mltPrtPclFontNameThe name of PCL Font.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.6.1.1.2 |
mltPrtPclFontNumberThe number of PCL Font.
The number for managing the font, which a printer holds inside.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.6.1.1.3 |
mltPrtPclFontSourceThe information of a place that PCL font exists.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.6.1.1.4 |
mltPrtPsFontTableThis table shows PostScript font information of printer has.
Since it is a function peculiar to PS, it is not necessary
to implement this table in the device in which PS is not installed. SEQUENCE OF MltPrtPsFontEntry .1.3.6.1.4.1.2590.1.1.1.1.6.6.2 |
mltPrtPsFontEntryInformation about printer's PS fonts.
Entries may exist in the table for each device
index whose device type is 'printer'. MltPrtPsFontEntry .1.3.6.1.4.1.2590.1.1.1.1.6.6.2.1 |
mltPrtPsFontIndexA unique value used to identify this entry.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.6.2.1.1 |
mltPrtPsFontNameThe name of PS Font.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.6.2.1.2 |
mltPrtPsFontNumberThe number of PS Font.
This number is used in order to administrate
printer's fonts.
If a printer does not manage this number,
this value should be implemented same as mltPrtPsFontIndex.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.6.2.1.3 |
mltPrtPsFontSourceThe information of a place that PS font existsro Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.6.2.1.4 |
mltPrtSymbolSetTableThis table shows symbol sets a printer has.
If no function in this table is supported by a device,
this table needs not to be implemented. SEQUENCE OF MltPrtSymbolSetEntry .1.3.6.1.4.1.2590.1.1.1.1.6.6.3 |
mltPrtSymbolSetEntryInformation about printer's symbol sets.
Entries may exist in the table for each device
index whose device type is 'printer'. MltPrtSymbolSetEntry .1.3.6.1.4.1.2590.1.1.1.1.6.6.3.1 |
mltPrtSymbolSetIndexA unique value used to identify this entry.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.6.3.1.1 |
mltPrtSymbolSetNameThe name of SymbolSet (CodedCharSet).ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.6.3.1.2 |
mltPrtCharSetIDThe ID of Code CharSet.
Refer to the following URL that IANA administrates
regarding character code sets:
http://www.iana.org/assignments/character-setsro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.6.3.1.3 |
mltPrtPaper OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1.6.7 |
mltPrtPaperSizeTableA table of the printer selectable paper sizes.
Even if a printer can not recognize the supportable paper,
one object ('unknown' or 'other') must be loaded at least. SEQUENCE OF MltPrtPaperSizeEntry .1.3.6.1.4.1.2590.1.1.1.1.6.7.1 |
mltPrtPaperSizeEntryAn entry exists in this table for each
device entry in the hostmib device table whose type
is 'printer' MltPrtPaperSizeEntry .1.3.6.1.4.1.2590.1.1.1.1.6.7.1.1 |
mltPaperSizeIndexA unique value used to identify this entry.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.7.1.1.1 |
mltPaperSizeNameThe name of paper size.
e.g., letter, legal, A4, B5 etc.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.7.1.1.2 |
mltPaperFeedDirThis value shows paper feeding orientation.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.7.1.1.3 |
mltPrtRemotePanel OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.1.6.10 |
mltPrtRemotePanelButtonTableA table of printer's remote operational panel button. SEQUENCE OF MltPrtRemotePanelButtonEntry .1.3.6.1.4.1.2590.1.1.1.1.6.10.1 |
mltPrtRemotePanelButtonEntryAn entry exists in this table for each
device entry in the hostmib device table whose type
is `printer' MltPrtRemotePanelButtonEntry .1.3.6.1.4.1.2590.1.1.1.1.6.10.1.1 |
mltPrtPanelButtonIndexA unique value used by the operational panel button
to identify tablero INTEGER .1.3.6.1.4.1.2590.1.1.1.1.6.10.1.1.1 |
mltPrtPanelButtonNameThe name of panel button.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.10.1.1.2 |
mltPrtPanelButtonPushThis value indicates panel button status, and make
pushing button.
noAction (0)
push (1)
longPush (2)
shiftPush (3)
button same time.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.1.6.10.1.1.3 |
mltPrtPanelButtonDescrAn explanation of panel button function etc.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.1.6.10.1.1.4 |
mltSysMib OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5 |
mltSysMibVersionThe version information of Standard MIB specification.
This indicates the version of the Private System MIB
which is implemented.
General form is AA.BC.
AA is indicating major revision, and B and C is
minor revision. Decimal point is ASCII-coded period.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.5.1 |
mltSysGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.2 |
mltSysPriorityDeviceThis object shows the function which operates with
highest priority in a system.
When it can set up by user choice etc., it should be RW.
If setup change is impossible from MIB, the implementation
of RO is acceptable.
There is no function with highest priority or no preference
order of function, implement RO as 0.rw INTEGER .1.3.6.1.4.1.2590.1.1.1.5.2.2 |
mltSysCurrentDateTimeTime, which is set in the system and specifies by DateAndTime
If not having a clock function, implement 0x00 in all Bytes.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2590.1.1.1.5.2.4 |
mltSysContact OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.3 |
mltSysContactSiteNameThe name of a support contact for system.
If device cannot support this object, device should
be implement '-' as read-onlyrw DisplayString .1.3.6.1.4.1.2590.1.1.1.5.3.1 |
mltSysContactInfoExplanation of a support contact for system.
Default value shall be a blank, and a service person
or a user shall input it.
If device cannot support this object, device should
be implement '-' as read-onlyrw DisplayString .1.3.6.1.4.1.2590.1.1.1.5.3.2 |
mltSysProductHelpURLURL of the support contact for system.
If device cannot support this object, device should
be implement '-' as read-onlyrw DisplayString .1.3.6.1.4.1.2590.1.1.1.5.3.3 |
mltSysCorpURLURL of the company which provides a system.
If device cannot support this object, device should
be implement '-' as read-onlyrw DisplayString .1.3.6.1.4.1.2590.1.1.1.5.3.4 |
mltSysSuppliesInfoA telephone number or E-mail addresses for
the supplies and accessories, etc.
In the support contact in which a system has.
Default shall be a blank, and a service person
or a user shall input it.
If device cannot support this object, device should
be implement '-' as read-onlyrw DisplayString .1.3.6.1.4.1.2590.1.1.1.5.3.5 |
mltSysVersion OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.5 |
mltSysVersionTableThe table for showing ROM and F/W version in which a system has. SEQUENCE OF MltSysVersionEntry .1.3.6.1.4.1.2590.1.1.1.5.5.1 |
mltSysVersionEntryThe version information of FW or ROM. MltSysVersionEntry .1.3.6.1.4.1.2590.1.1.1.5.5.1.1 |
mltSysVersionIndexIndex for uniquely showing the version information
in which a system has. The number and the order of
index depends on an implementation of a model.
Implement the maximum number of index of ROM and F/W
which is possible to detect/display, regardless of
the availability of installation of Option etc.
The number of indexes to hold shall be always fixed
regardless of the option installation state.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.5.1.1.1 |
mltSysVerNameThe name of the function which shows a version.
For example,
'MSC/Panel ROM Version', 'Printer ROM Version', etc.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.5.5.1.1.2 |
mltSysVersionCodeThe version of ROM and F/W.
It shall be written by 15 or less characters.
'[Product Code(4)]-[Block Code(2)][Stage Code(1)]
[Specification Code(1)]-[Change Management Code(2)]
-[Shipment Destination Code(2)]' supports.
For corresponding to the other written methods,
it was made into the maximum 31 characters, on the
definition. When the value cannot acquire although
index is set by Option etc., display '-' (hyphen).ro DisplayString .1.3.6.1.4.1.2590.1.1.1.5.5.1.1.3 |
mltSysVerDescrExplanation of a version.
As for the contents to indicate, depends on an
implementation of a model. However,
since not supporting this object is not acceptable,
implement Null (Zero-Length) at least.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.5.5.1.1.4 |
mltSysComponent OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.6 |
mltSysCompConfigIDShows the ID by the combination of the structure of Device.
A project should prepare ID which is worth for the number
of combination, such as Option.
If system has no option or cannot detect option installed,
this value should be always 0.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.6.1 |
mltSysInputTrayTableThe table for showing the information of Input tray
that is installed in a system.
As a principle, the un-acquirable information shall be
displayed if there is only prtInputTable, and this table
is premised on that PrinterMIB is being implemented.
It shall display about InputTray which is installed
like prtInputTable.
If a system does not have a printer engine (has no input
tray and no PrinterMIB), this table does not need to
implement. SEQUENCE OF MltSysInputTrayEntry .1.3.6.1.4.1.2590.1.1.1.5.6.2 |
mltSysInputTrayEntryThe information of paper input tray. MltSysInputTrayEntry .1.3.6.1.4.1.2590.1.1.1.5.6.2.1 |
mltSysInputTrayIndexIndex for showing InputTray in a system.
Index depends on the state of the implementation of
a model, and shall be taken the amount which is worth
for the number of InputTray in the order from 1.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.6.2.1.1 |
mltSysInputTrayRefIndexThe value of prtInputIndex of a tray which
mltSysInputTrayIndex shows.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.6.2.1.2 |
mltSysInputTrayNameThe name of InputTray.
Default value depends on a model. In principle,
use the name unified by DriverUI.
Set of the character string up to 15 characters
shall be possible.
implementation of RO is also accepted when there are
capacity restrictions of NVRAM.
Since this item is the value used when a user does
a remote management, it is not necessary to link it
with a setup of a printer engine.
SNMP agent holds value, and should just provide the
convenience to the user who remote accesses.rw DisplayString .1.3.6.1.4.1.2590.1.1.1.5.6.2.1.3 |
mltSysInputTrayCapacitySenceThis item shows the detection method of paper residual
quantity, and is used for distinction of the value
displayed in prtInputCurrentLevel. The details of a
residual quantity display are indicated to
prtInputCurrentLevel.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.5.6.2.1.4 |
mltSysInputTraySpecialPaperShows the media type of InputTray.
If this value is RW and when a setup is changed by MIB,
it shall be reflected in a setup of a printer engine.
In a unavoidable case, the access way may be RO.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.5.6.2.1.5 |
mltSysInputTrayPaperAttributeShows the paper attribute of InputTray.
If this value is RW and when a setup is changed by MIB,
it shall be reflected in a setup of a printer engine.
In a unavoidable case, the access way may be RO.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.5.6.2.1.6 |
mltSysOutputTrayTableThe table for showing the information of OutputTray
relation in a system. Index shall be mltSysOutputTrayIndex.
This table is for displaying the tray information of
OutputOption (Finisher), and shall not include the
function information of Finisher.
If a system does not have a printer engine
(has no output tray and no PrinterMIB),
this table may not be implemented. SEQUENCE OF MltSysOutputTrayEntry .1.3.6.1.4.1.2590.1.1.1.5.6.3 |
mltSysOutputTrayEntryThe information of paper output tray. MltSysOutputTrayEntry .1.3.6.1.4.1.2590.1.1.1.5.6.3.1 |
mltSysOutputTrayIndexIndex for showing OutputTray in a system.
Index depends on the implementation of a model,
and shall be taken the amount which is worth for
the number of Output in the order from 1.
In principle, when the top tray is set as 1,
index shall be increased in progress of going to
the lower part. As for the middle processing tray
that does not become papers' final output destination,
is not treated as OutputTray.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.6.3.1.1 |
mltSysOutputTrayRefIndexValue of prtOutputIndex of the tray which
mltSysOutputTrayIndex shows.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.6.3.1.2 |
mltSysOutputTrayDefaultNameThe name of OutputTray. Unify with the notation of
a manual or a driver.ro DisplayString .1.3.6.1.4.1.2590.1.1.1.5.6.3.1.3 |
mltSysOutputTrayNickNameThe name of OutputTray in which a user can set up.
In MailBin, use it in order to indicate a user's
name, etc. which each Tray set up.
The recommendation default is the same as mltSysOutputTrayDefaultName.
Set of the character string up to 15 characters shall be possible,
and neither retrenchment of the number of characters
which can be written in, nor implementation of RO
shall be accepted.
However, the implementation of RO is accepted only
to the thing without MailBin as OutputOption.
Moreover, being reflected in the display screen of
a printer driver is desirable.
Since this item is the value used when a user does
a remote management, it is not necessary to link it
with a setup of a printer engine. SNMP agent holds value,
and should just provide the convenience to the user who
remote accesses.
If device cannot support this function, this object
should be '-' as ReadOnly.rw DisplayString .1.3.6.1.4.1.2590.1.1.1.5.6.3.1.4 |
mltSysOutputTrayTypeShows the type of tray in OutputTray.
This is an item for judging whether it is MailBin,
and it is used in order to judge whether the writing
of NickName should be possible.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.5.6.3.1.5 |
mltSysCounter OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.7 |
mltSysCounterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.7.1 |
mltSysSupportedCounterTypeShows the type of a counter installed in a system.
The counter which a system has can specify by referring
to this.
Displays the counter to support with Bitmap and shows
the supporting counter by the total.
Bit Value CounterType
-
0 1 GeneralCounter
1 2 PrintFunctionCounter
2 4 SendFunctionCounter
3 8 PapersSizeCounter
4 16 DivCounter
5 32 TonerLifeCounter
It becomes 63 when implementing all the counters.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.7.1.1 |
mltSysDuplexCountModeSets up whether Duplex printing is counted two times
to TotalCounter at the time.
This setup is reflected to all TotalCounters.
This object may be implemented with RO access.
If a system doesn't have this setting (e.g. printer),
the value of the static count mode (1 or 2) must be implemented.
Basically this value must not be '0'.
This is also applied to mtSysLargeSizeCountMode and
mltSysLargeSizeMode same.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.1.2 |
mltSysLargeSizeCountModeSets up whether LargeSize is counted two times
to TotalCounter at the time.
This setup is reflected to all TotalCounters.
This object may be implemented with RO access.
This setting is the item of a service choice.
A setup of a service choice is reflected to this object.
Also enable operation from PageScope.
Management of the access rights supports by PageScope side.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.1.3 |
mltSysLargeSizeTypeSets up the type of paper counted as LargeSize.
noLargeSize(0): indicates that the count of LargeSize is
not performed or not detect large size type.
typeA(1): For US is 11x17,
For EU is A3,
For Japan is A3.
typeB(2): For US is 11x17,
For EU is A3/B4,
For Japan is A3/B4.
typeC(3): For US is 11x17/11x14/8.5x14,
For EU is A3/B4,
For Japan A3/B4.
This object may be implemented with RO access.
The choice item of EP-NET.
Also enable operation from PageScope.rw Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.1.4 |
mltSysColorCountSupportTypeIt is shown what kind of counter by the color is supported.
The color counter which a device supports can be specified
by referring to this. Displays the type of counter to
support with Bitmap and shows the supporting counter by
the total. The type counter that is shown in here shall
be held by the color-related counter.
Bit Value CounterType
0 1 reserved
1 2 bw
2 4 fourColor (4c)
3 8 threeColor (3c)
4 16 cmy
5 32 rgb
6 64 monoColor
7 128 paperPathro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.7.1.5 |
mltSysSystemCounter OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.7.2 |
mltSysGeneralCounter OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.1.5.7.2.1 |
mltSysTotalCountThe total print count of a system.
Displays the total of Copy, Print, and Receiving Job.
About the count method of Duplex and LargeSize,
it depends on a setup. A count shall be an output count.
About a color machine, it shall be the total of all
color classifications.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.1.1 |
mltSysLargeSizeCountThe total print count of LargeSize paper.
About the type of LargeSize, it depends on
a setup of mltSysLargeSizeType.
When the setup of mltSysLargeSizeType is noCount(0),
this counter always shall be -1.
In addition, also in the system without A4 machine, etc.,
this counter should be -1.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.1.2 |
mltSysDuplexCountThe total print count of Duplex (back).
In the system without Duplex mechanism, it should be -1.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.1.3 |
mltSysLargeDuplexCountThe total print count of LargeSize, and also Duplex (back).
About the type of LargeSize, it depends on a setup of
mltSysLargeSizeType.
When the setup of mltSysLargeSizeType is noCount(0),
this counter always shall be -1.
In addition, in the system of A4 machine or in the
system without Duplex, this counter always should be -1.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.1.4 |
mltSysSendTotalCountTotal count scaned as a transmitting function in the system.
It shall be the total of mltSysSendScanCount.
In the device without Scan function, it always shall be -1.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.1.5 |
mltSysTotalJamCountThe number of times of Jam occurred in the system.
It shall be the total of all Jam counters.
(including ADF jams).ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.1.6 |
mltSysTotalTroubleCountThe number of times of Trouble (FatalError) occurred in
the system. It shall be the total of all Trouble counters.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.1.7 |
mltSysPrintFunctionCounterTableThe table for showing the counter by the color and function.
In the monochrome machine of a single function,
it is not necessary to implement. SEQUENCE OF MltSysPrintFunctionCounterEntry .1.3.6.1.4.1.2590.1.1.1.5.7.2.2 |
mltSysPrintFunctionCounterEntryThe counters of color and print functions. MltSysPrintFunctionCounterEntry .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1 |
mltSysPrintFunctionColorIndexIndex for showing the color in the counter
by color/function.
By the color, index shall be attached in the
order of the following.
No. Function
1 BW
2 4C
3 3C
4 CMY
5 RGB
6 MonoColorro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.1 |
mltSysPrintFunctionIndexIndex for showing the function in the counter
by color/function.
By the function, index shall be attached in the
order of the following.
No. Function
1 copy
2 printer
3 received Job
4 fax received Job
5 reportPrint
Although classifying into printer/receive Job/fax
receive job as a printing function is recommended,
the implementation of multiple counting as a printer
function is also accepted.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.2 |
mltSysPrintFunctionColorTypeShows the color mode in the counter by color/function.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.3 |
mltSysPrintFunctionTypeShows the function in the counter by color/function.
Although classifying into printer/receive Job/fax
receive job as a printing function is recommended,
the implementation of multiple counting as a printer
function is also accepted.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.4 |
mltSysPrintFunctionTotalCountThe total print count in a specified function.
About the count method, complies with GeneralCounterro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.5 |
mltSysPrintFunctionDuplexCountThe print count of Duplex (back) in a specified function.
The print count of the LargeSize paper in
a specified function.
About the count method, complies with GeneralCounter.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.6 |
mltSysPrintFunctionLargeSizeCountThe print count of the LargeSize paper in
a specified function.
About the count method, complies with GeneralCounter.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.7 |
mltSysPrintFunctionLargeDuplexCountThe print count of LargeSize and Duplex (back)
in a specified function.
About the count method, complies with GeneralCounter.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.2.1.8 |
mltSysSizeCounterTableThe table of the counter by the paper sizes (types).
The model which supports plural paper sizes has
to implement.
Regardless of shipment destination, having a counter
to all the paper sizes that can be printed is recommended.
By implementation, implementing different size counter
by shipment destination is also accepted.
It shall also have index by the functions so that
it can correspond to the counter by sizes by the functions. SEQUENCE OF MltSysSizeCounterEntry .1.3.6.1.4.1.2590.1.1.1.5.7.2.4 |
mltSysSizeCounterEntryThe information of paper size counters. MltSysSizeCounterEntry .1.3.6.1.4.1.2590.1.1.1.5.7.2.4.1 |
mltSysSizeFunctionIndexIndex for showing the function which becomes
the count object in the counter by paper sizes.
Although Index shall be attached in the order of
the following by the function, having Index by
fixation shall not require.
No. Function
1 Totalro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.7.2.4.1.1 |
mltSysSizeTypeIndexIndex for showing the paper which becomes
the count object in the counter by paper sizes.
Only the type of corresponding paper shall be
taken in the order from 1.
Using fixed index for every paper does not require.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.7.2.4.1.2 |
mltSysSizeFunctionShows the function which becomes the count
object in the counter by paper size.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.2.4.1.3 |
mltSysSizeTypeShows the paper which becomes the count object
in the counter by paper sizes.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.2.4.1.4 |
mltSysSizeCountThe number of print of the specified function
and specified size, media type, or attribute.ro Integer32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.4.1.5 |
mltSysTonerLifeCounterTableThe table of toner life counter. SEQUENCE OF MltSysTonerLifeCounterEntry .1.3.6.1.4.1.2590.1.1.1.5.7.2.5 |
mltSysTonerLifeCounterEntryThe information of toner life counters. MltSysTonerLifeCounterEntry .1.3.6.1.4.1.2590.1.1.1.5.7.2.5.1 |
mltSysTonerTypeIndexIndex for Toner used as the count object in TonerLife
counter being shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.1.5.7.2.5.1.1 |
mltSysTonerTypeToner used as the count object in TonerLife counter is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.1.5.7.2.5.1.2 |
mltTonerTypeCountTonerLife count.
This is used for calculation of Coverage,
by the amount of Toner consumption, etc.
by counting Dot number used for every Toner.
1unit is 2M Dots.ro Counter32 .1.3.6.1.4.1.2590.1.1.1.5.7.2.5.1.3 |
mltInterface OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2 |
mltNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1 |
mltNetworkMib OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5 |
mltNetMibVersionThe standardization version of MIB implemented in Network.
This indicates the version of the Private Network MIB.
General form is AA.BC.
AA is indicating major revision, and B and C is
minor revision. Decimal point is ASCII-coded period.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.1 |
mltNetGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.2 |
mltNetGeneralTableTable for showing the general information of
Network relation. SEQUENCE OF MltNetGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.2.1 |
mltNetGeneralEntryGeneral information of network interface. MltNetGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1 |
mltNetGeneralIndexIndex for showing NetworkInterface installed to a device.
Basically, it shall take the same value with ifIndex.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.1 |
mltNetFirmVersionShows the FW version of NetworkInterface.
Write it as ##.xx.
## shall be a major version and xx shall
be a minor version.
If there is no original FW of NetworkInterface,
implement character strings of '-' (hyphen).ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.2 |
mltNetHardwareAddressMAC address of NetworkInterface. (Hardware address)
In the device of our company, it was made into RW since
MAC address needs to be written at the time of shipment.
Implement as RO when the writing of MAC address is unnecessary.
Moreover, in a management tool side, be sure to handle it as RO.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.3 |
mltNetSerialNumberThe serial number of NetworkInterface.
Implement '-' (hyphen) in the device without a serial number.
In the device of our company, it was made into RW since serial
number may need to be written at the time of shipment.
Implement as RO when the writing of serial number is unnecessary.
Moreover, in a management tool side, be sure to handle it as RO.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.4 |
mltNetSupportedConnectorAn integer bitmap value specifying network connector
information. Each bit in the integer is defined as follows.
bit Value Connector
0 1 Reserved
1 2 Ethernet AUI
2 4 Ethernet BNC
3 8 Ethernet RJ45
4 16 Ethernet Fiber
5 32 Reserved
6 64 Reserved
7 128 TokenRing STP(DB-15)
8 256 TokenRing UTP(RJ-45)
9 512 TokenRing Fiber
10 1024 Reserved
11 2048 wirelessA
12 4096 wirelessB
13 8132 blueTooth
14 16364 ieee1394ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.5 |
mltNetCurrentConnectorShows the connector that is working on NetworkInterface.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.6 |
mltNetSpeedConfigSets up the speed of NetworkInterface.
Refer to ifSpeed for checking the present speed of operation.
If this setting can not be set from Network access, a device
should implement a current set value with RO access.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.7 |
mltNetInterfaceTypeShows the type of NetworkInterface.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.8 |
mltNetIfDescrExplanation of NetworkInterface.
Shows the type of port and the version information.
The name to indicate is determined at Project side
and implementation of NullString is not accepted.
Even if a device have a no description about this,
'-' need to be implemented.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.2.1.1.9 |
mltNetProtocol OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.3 |
mltNetProtocolTableThe table for showing the protocol information
which NetworkInterface supports. SEQUENCE OF MltNetProtocolEntry .1.3.6.1.4.1.2590.1.1.2.1.5.3.1 |
mltNetProtocolEntryThe information of protocol. MltNetProtocolEntry .1.3.6.1.4.1.2590.1.1.2.1.5.3.1.1 |
mltNetProtocolIfIndexIndex for showing NetworkInterface that a system has.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.3.1.1.1 |
mltNetProtocolIndexIndex for uniquely showing the protocol which
a system supports. Index shall be assigned in
the following order is recommended.
No. Protocol
1 TCP/IP
2 NetWare(IPX/SPX)
3 AppleTalk
4 SMBro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.3.1.1.2 |
mltNetProtocolTypeShows the type of supporting protocol.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.3.1.1.3 |
mltNetProtocolDescrDescription that shows a protocol.
Although the value to indicate shall depend on
an implementation, the general protocol name,
such as 'TCP/IP', 'NetWare', etc., shall be indicated
in principle. Implementation of Null is not accepted.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.3.1.1.4 |
mltNetProtocolVerThe version of the implemented protocol stack.
Implement '-' (hyphen) when there is no version notation.
Implementation of Null is not accepted.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.3.1.1.5 |
mltNetProtocolOnOffSets up a states display of On and Off of
the function of each protocol.
If this setting can not be set from Network access,
a device should implement a current set value with RO access.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.3.1.1.6 |
mltNetCommand OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.5 |
mltNetCommandTableThe table for showing the command information
which NetworkInterface supports. SEQUENCE OF MltNetCommandEntry .1.3.6.1.4.1.2590.1.1.2.1.5.5.1 |
mltNetCommandEntryThe information of command for network interface. MltNetCommandEntry .1.3.6.1.4.1.2590.1.1.2.1.5.5.1.1 |
mltNetCommandIfIndexIndex for uniquely showing the destination of command.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.5.1.1.1 |
mltNetCommandResetThe command that performs independent reset of
NetworkInterface.
When reset(2) is set, an agent side shall surely
return Reply. Implementation that performs Reset
immediately without returning Reply is not accepted.
Return Reply of an error, when Reset command is invalid.
After reset(2) is set, about the timing which is
actually performing Reset depends on an implementation,
and it shall not be defined in MIB.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.5.1.1.2 |
mltNetCommandDefaultThe command for returning a setup about
NetworkInterface to FactoryDefault.
When resetToDefault(2) is set, an agent side
shall surely return Reply.
In principle, when resetToDefault(2) is set,
about the timing in which the setup returns to
default depends on an implementation and it does
not define in MIB.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.5.1.1.3 |
mltNetCommandPrintNicConfigThe command for making it perform the output of
ConfigPage which Network Interface has at the
time of normal operation.
Independent ConfigPage of two or more kinds of
Network is not considered.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.5.1.1.4 |
mltNetCommandStartupConfigThe command that sets up the availability of
the output of ConfigPage of NetworkInterface
at the time of starting.
Independent StartupPage of two or more kinds of
Network is not considered.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.5.1.1.5 |
mltNetCommandDownLoadThe command that sets up the mode that updates
FW of NetworkInterface.
Since this setup needs to operate with Admin authority,
do not perform both display and writing at the management
tool side.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.5.1.1.6 |
mltNetSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.6 |
mltNetSnmpCommTableThe table for showing the information of Community
of SNMP which a system has.
In addition, Community name shall be the common to
the whole system on the premise, and shall not have
independent Community for every NetworkInterface.
In having Community independently by Intelligent NIC etc.,
it shall have NetworkMIB independently to each and is not
managed by unified agent. SEQUENCE OF MltNetSnmpCommEntry .1.3.6.1.4.1.2590.1.1.2.1.5.6.1 |
mltNetSnmpCommEntry MltNetSnmpCommEntry .1.3.6.1.4.1.2590.1.1.2.1.5.6.1.1 |
mltNetSnmpCommIndexIndex for identifying each SNMP community.
Although about Community number to support,
Community name, and each access rights are
dependent on an implementation, having the
following three Communities is recommended.
public (RO)
private (RW)
admin (RW)
It shall be indispensable at least to have
public (RW) or to have the two of public (RO)
and private (RW).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.6.1.1.1 |
mltNetSnmpCommNameCommunity name of SNMP. Having the above-mentioned
name as default is recommended. This item does not
accept the implementation of RO. Community name has
to be changeable.
But if Community name can not be changeable,
'public' or 'private' is recommended to be implemented
as Community name with RO access.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.6.1.1.2 |
mltNetSnmpCommAccessRightShows the access rights of SNMP community.
If this setting can not be set from Network access,
a device should implement a current set value with RO access.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.6.1.1.3 |
mltNetSnmpTrapTableThe table for showing the information of
destination of Trap of SNMP.
When it does not have Trap function of SNMP,
this Table does not need to implement. SEQUENCE OF MltNetSnmpTrapEntry .1.3.6.1.4.1.2590.1.1.2.1.5.6.2 |
mltNetSnmpTrapEntry MltNetSnmpTrapEntry .1.3.6.1.4.1.2590.1.1.2.1.5.6.2.1 |
mltNetSnmpTrapIfIndexThe index for uniquely showing the NetworkInterface
which becomes the sender of Trap.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.6.2.1.1 |
mltNetSnmpTrapIndexThe index for uniquely showing the destination of Trap.
In Default, it shall have at least one TrapAddress in a Table.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.6.2.1.2 |
mltNetSnmpTrapCommunityCommunity name at the time of transmitting Trap.
In Default, it shall have public.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.6.2.1.3 |
mltNetSnmpTrapIpAddressIP address of Trap destination.
It shall be 255.255.255.255 (BroadCast) in Default.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.6.2.1.4 |
mltNetSnmpTrapIpxAddressIPX address of the destination of Trap.
It shall be 'FFFFFFFF:FFFFFFFFFFFFFFFF' in Default.
When it does not have Trap transmitting function in IPX,
the character string of '-' (hyphen) shall be displayed.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.6.2.1.5 |
mltNetSnmpTrapOnOffOn/Off of transmission of Trap is controlled.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.6.2.1.6 |
mltNetTcpip OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7 |
mltNetTcpipGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.1 |
mltNetTcpipGeneralTableTable with the basic information of TCP/IP relation which
NetworkInterface has. SEQUENCE OF MltNetTcpipGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1 |
mltNetTcpipGeneralEntry MltNetTcpipGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1 |
mltNetTcpipIfIndexIndex for uniquely showing NetworkInterface which IP address
is set up. The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.1 |
mltNetTcpipDefaultThe command that returns all setup about TCP/IP to FactoryDefault.
When resetToDefault(2) is set, an agent side shall surely
return Reply. In principle, when resetToDefault(2) is set,
about the timing in which the setup returns to default
depends on an implementation and it does not define in MIB.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.2 |
mltNetTcpipAddressIP address of NetworkInterface.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.3 |
mltNetTcpipSubnetSubnet mask of NetworkInterface.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.4 |
mltNetTcpipGatewayDefaultGateway of NetworkInterface.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.5 |
mltNetTcpipUseBootProtocolSpecifies the IP address acquisition method of
NetworkInterface.
The value taken by default depends on the implementation
of a model.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.6 |
mltNetTcpipBootProtocolEnableBitmap for specifying BootProtocol used in order to determine
the IP address of NetworkInterface. The value that should have
by Default depends on the implementation of a model.
An integer bitmap value specifying bootProtocols.
Each bit in the integer is defined as follows.
bit Value Type
0 1 Arp & Ping
1 2 RARP
2 4 BootP
3 8 DHCP
4 16 AutoIP
If this setting can not be set from Network access,
a device should implement this value with RO access.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.7 |
mltNetTcpipAddressServerIP address of Server which offered IP address when
IP address was acquired by bootProtocol.
When it is manually inputted or Address in NVRAM is used,
'0.0.0.0' shall be inputted for this value.
This value shall be held even if turning a power supply off.ro IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.8 |
mltNetTcpipRawPortNumberPort number for RAW socket printing.
Default shall be '9100'.
In addition, two or more RAW Port printings shall not be supported.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.9 |
mltNetTcpipSupportServiceIn NetworkInterface, shows the service supported on TCP/IP by Bitmap.
An integer bitmap value specifying TCP/IP support service
information. Each bit in the integer is defined as follows.
bit Value Service
0 1 Reserved
1 2 Reserved
2 4 LPD
3 8 Reserved for LPR
4 16 telnet
5 32 Reserved for telnet client
6 64 ftp server
7 128 ftp client
8 256 http server
9 512 Reserved for http client
10 1024 Reserved for POP3 server
11 2048 POP3 client
12 4096 Reserved for SMTP server
13 8132 SMTP client
14 16364 ipp
15 32768 Reserved
16 65536 Reserved
17 131072 slp
18 262144 Reserved for IMAP server
19 524288 IMAP client
20 1048576 Reserved
21 2097152 Reserved for UPnPrw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.10 |
mltNetTcpipDnsSupportSets up the availability of use of DNS.
The following value shall be used.
When DNS is not being supported, always takes 0.
When supporting, Default shall be noUse(2).
If this setting can not be set from Network access,
a device should implement this value with RO access.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.11 |
mltNetTcpipDnsHostNameThe host name of NetworkInterface used by DNS.
Default in the case of supporting DNS is Null (size =0).
When DNS is not being supported, implement '-' (hyphen)
and shall be RO.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.12 |
mltNetTcpipDnsDomainNameDomain name to which NetworkInterface used by DNS belongs.
Default in the case of supporting DNS is Null (size =0).
When DNS is not being supported, implement '-' (hyphen)
and shall be RO.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.1.1.13 |
mltNetTcpipDnsTableThe table for showing DNS Server. SEQUENCE OF MltNetTcpipDnsEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.2 |
mltNetTcpipDnsEntry MltNetTcpipDnsEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.2.1 |
mltNetTcpipDnsIfIndexThe index for uniquely showing NetworkInterface to which
IP address is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.2.1.1 |
mltNetTcpipDnsServerIndexThe index for uniquely showing each DNS Server.
It shall have at least one or more Indexes as Default.
The number of Indexes depends on an implementation.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.2.1.2 |
mltNetTcpipDnsServerAddressIP address of DNS Server.
If this setting can not be set from Network access,
a device should implement this value with RO access.rw IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.7.1.2.1.3 |
mltNetLpd OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.2 |
mltNetLpdGeneralTableThe table for showing the general information of lpd. SEQUENCE OF MltNetLpdGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.1 |
mltNetLpdGeneralEntry MltNetLpdGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.1.1 |
mltNetLpdIfIndexThe index for uniquely specifying NetworkInterface to
which lpd is set.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.1.1.1 |
mltNetLpdEnableSets up Enable/Disable of service of lpd.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.1.1.2 |
mltNetLpdPortSpecifies Port number which lpd uses. Default is 515.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.1.1.3 |
mltNetLpdQueueTableThe table for showing the information of Queue of lpd. SEQUENCE OF MltNetLpdQueueEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2 |
mltNetLpdQueueEntry MltNetLpdQueueEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1 |
mltNetLpdQueueIfIndexThe index for uniquely specifying NetworkInterface to
which each Queue is set.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1.1 |
mltNetLpdQueueIndexThe index for uniquely showing Queue set up for
every NetworkInterface.
The number of Indexes depends on an implementation.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1.2 |
mltNetLpdQueueNameThe name of Queue used at the time of printing by lpd.
The value of Default depends on a model.
Default shall be '-' (hyphen) when printing function
has no relation to the name of Queue.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1.3 |
mltNetLpdQueueDescrIt recommends describing the information which serves
as help when a user performs a setup for lpr printing.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1.4 |
mltNetLpdQueueFilterSelects Filter function set as Queue by Bitmap.
When there is no Filter function in Queue, shall always be 0.
Each bit in the integer is defined as follows.
bit Value Filter
0 1 FF (Form Feed)
1 2 LF (Line Feed)
2 4 CR (Carriage Return)
3 8 PS (Add PostScript Header)
4 16 reserved
5 32 rejectPS
6 64 rejectPCL
7 128 rejectASCIItro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1.5 |
mltNetLpdQueueBannerA setup of BannerPage set in Queue.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1.6 |
mltNetLpdQueueEnableSets up Enable/Disable of each Queue.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.2.2.1.7 |
mltNetFtpd OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.6 |
mltNetFtpdGeneralTableThe table for showing the general information of FTP Server. SEQUENCE OF MltNetFtpdGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.1 |
mltNetFtpdGeneralEntry MltNetFtpdGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.1.1 |
mltNetFtpdIfIndexThe index for uniquely specifying NetworkInterface to
which FTP server is set up. The value of index shall
be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.1.1.1 |
mltNetFtpdEnableSets up Enable/Disable of service of FTP.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.1.1.2 |
mltNetFtpdPortSpecifies Port number which FTP Server uses. Default is 21.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.1.1.3 |
mltNetFtpdConfigTableThe table for showing the User information connectable to FTPServer. SEQUENCE OF MltNetFtpdConfigEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2 |
mltNetFtpdConfigEntry MltNetFtpdConfigEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2.1 |
mltNetFtpdConfigIfIndexThe Index for uniquely specifying NetworkInterface to
which each User considers as an object.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2.1.1 |
mltNetFtpdUserIndexThe index for uniquely showing the User.
The number of Indexes depends on an implementation.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2.1.2 |
mltNetFtpdUserLogin user name of FTP Server.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2.1.3 |
mltNetFtpdUserPassWdPassword of FTP Server.
When it is gotten, applying scramble to value is not accepted.
About security, support by the management tool side.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2.1.4 |
mltNetFtpdCapabilityShows the function permitted to each user on FTP Server by Bitmap.
An integer bitmap value specifying FTP function
information. Each bit in the integer is defined as follows.
bit Value Filter
0 1 putting job & No Filter
1 2 putting job & CR-LF invert
2 4 get (status or job or Driver)
3 8 put NIC Firmware
4 16 put Printer Font
5 32 reservedro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2.1.5 |
mltNetFtpdDescrExplanation etc. of the function set to each user is indicated.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.6.2.1.6 |
mltNetHttpd OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.8 |
mltNetHttpdGeneralTableThe table for showing the general information about HTTP Server. SEQUENCE OF MltNetHttpdGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.8.1 |
mltNetHttpdGeneralEntry MltNetHttpdGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.8.1.1 |
mltNetHttpdIfIndexIndex for uniquely showing NetworkInterface to
which HTTP Server is set up.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.8.1.1.1 |
mltNetHttpdEnableSets up Enable/Disable of service of HTTP Server.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.8.1.1.2 |
mltNetHttpdPortThe port number which HTTP Server uses. Default is 80.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.8.1.1.3 |
mltNetHttpdDescrIndicates the information, such as a version of HTTP Server.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.8.1.1.4 |
mltNetSmtpClient OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.13 |
mltNetSmtpGeneralTableThe table for showing the general information of SMTP. SEQUENCE OF MltNetSmtpGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.1 |
mltNetSmtpGeneralEntry MltNetSmtpGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.1.1 |
mltNetSmtpIfIndexThe index for uniquely specifying NetworkInterface to
which SMTP is set.
The value of Index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.1.1.1 |
mltNetSmtpEnableSets up Enable/Disable of service of SMTP.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.1.1.2 |
mltNetSmtpServerAddressShows the IP address of SMTP Server.
Considering about specification by Domain name,
it is made into DisplayString.
In the case of specifying by the IP address,
it shall be handled as a character string of maximum 15
characters of 'xxx.xxx.xxx.xxx'.
Whether to accept a setup by Domain name is dependent
on an implementation of a model.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.1.1.3 |
mltNetSmtpPortSpecifies Port number which SMTP uses. Default is 25.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.1.1.4 |
mltNetSmtpAccountTableThe table for showing Account information of SMTP. SEQUENCE OF MltNetSmtpAccountEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2 |
mltNetSmtpAccountEntry MltNetSmtpAccountEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1 |
mltNetSmtpAccountIfIndexThe index for uniquely specifying NetworkInterface to
which each From setup makes into the object.
The value of Index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1.1 |
mltNetSmtpAccountIndexThe index for uniquely showing e-mail From address setup.
Although the number of index depends on an implementation,
index of the number of functions in which EP-NET and
Scan function etc. are supporting needs to be prepared in Default.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1.2 |
mltNetSmtpFromAddressThe address of From Field used by SMTP.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1.3 |
mltNetSmtpReplyAddressThe address of RepryTo used by SMTP.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1.4 |
mltNetSmtpConnTimeoutTimeout setup in SMTP. A unit is second.
It shall be possible to set the number between 30-300.
Default is 60 (seconds).rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1.5 |
mltNetSmtpPurposeDisplays the use of From setup of SMTP.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1.6 |
mltNetSmtpDescriptionDescription of each From setup.
Default is dependent on an implementation.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.13.2.1.7 |
mltNetIpp OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14 |
mltNetIppGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1 |
mltNetIppGeneralTableThe table for showing the general information of IPP. SEQUENCE OF MltNetIppGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.1 |
mltNetIppGeneralEntry MltNetIppGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.1.1 |
mltNetIppGeneralIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set.
The value of Index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.1.1.1 |
mltNetIppServiceEnableSets up Enable/Disable of service of IPPrw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.1.1.2 |
mltNetIppDefaultPortIndexmltNetIppPortIndex which shows Default Port number used by IPP.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.1.1.3 |
mltNetIppPortTableThe table for showing Port information of IPP. SEQUENCE OF MltNetIppPortEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.2 |
mltNetIppPortEntry MltNetIppPortEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.2.1 |
mltNetIppPortIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set.
The value of Index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.2.1.1 |
mltNetIppPortIndexThe index for uniquely showing Port.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.2.1.2 |
mltNetIppPortNumberPort number. '631' is supported at least.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.1.2.1.3 |
mltNetIppPrtDescrAttribute OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2 |
mltNetIppPrtDescGeneralTableThe table for showing the general information about
Printer Description Attribute of IPP. SEQUENCE OF MltNetIppPrtDescGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1 |
mltNetIppPrtDescGeneralEntry MltNetIppPrtDescGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1 |
mltIppPrtDescGeneralIfIndexIndex for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value
with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.1 |
mltIppPrtName'printer-name' attribute is shown.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.2 |
mltIppPrtMoreInfo'printer-more-info' attribute is shown.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.3 |
mltIppPrtState'printer-state' attribute is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.4 |
mltIppCharSetConfiguredIndexIndex which shows 'charset-configured.'ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.5 |
mltIppNaturalLanguageConfiguredIndex'natural-language-configured' attribute is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.6 |
mltIppDocFormatDefaultIndex'document-format-default' attribute is shown.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.7 |
mltIppPrinterIsAcceptingJobs'printer-is-accepting-jobs' attribute is shown.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.8 |
mltIppQueuedJobCount'queued-job-count' attribute is shown.ro Counter .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.9 |
mltIppColorSupported'color-supported' attribute is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.10 |
mltIppPdlOverrideSupported'pdl-override-supported' attribute is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.11 |
mltIppPrinterUpTime'printer-up-time' attribute is shown.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.12 |
mltIppPrtLocation'printer-location' attribute is shown.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.13 |
mltIppPrinterCurrentTime'printer-current-up-time' attribute is shown.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.1.1.21 |
mltIppUriSupportedTableThe table for showing 'printer-uri-authentication-supported'
and 'printer-uri-security-supported' to 'printer-uri-supported'
attribute and each 'printer-uri'. SEQUENCE OF MltIppUriSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.2 |
mltIppUriSupportedEntry MltIppUriSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.2.1 |
mltIppUriIfIndexIndex for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.2.1.1 |
mltIppUriIndexIndex for uniquely showing 'printer-uri'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.2.1.2 |
mltIppUri'printer-uri' to support is shown.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.2.1.3 |
mltIppUriSecurity'printer-uri-security' to 'printer-uri' to support is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.2.1.4 |
mltIppUriAuthentication'printer-uri-authentication' to 'printer-uri' to support is shown.
This item is an IPP Ver1.1 support item.
In implementation of IPP Ver1.0,
it is not necessary to implement this item.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.2.1.5 |
mltIppPrtStateReasonsTableThe table which shows 'printer-state-reasons' attribute. SEQUENCE OF MltIppPrtStateReasonsEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.3 |
mltIppPrtStateReasonsEntry MltIppPrtStateReasonsEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.3.1 |
mltIppPrtStateReasonIfIndexThe index for uniquely specifying NetworkInterface
to which IPP is set. The value of index shall be
the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.3.1.1 |
mltIppPrtStateReasonIndexIndex for uniquely showing 'printer-state-reasons'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.3.1.2 |
mltIppPrinterStateReason'printer-state-reasons' attribute is shown.
mltIppPrtStateReasonSuffix shows suffix of
'-report', '-warning', and '-error'ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.3.1.3 |
mltIppPrtStateReasonSuffixThree suffixes ('-report', '-warning', and '-error')
of 'printer-state-reasons' attribute are shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.3.1.4 |
mltIppVersionsSupportedTableTable which shows 'ipp-versions-supported.'
This item is an IPP Ver1.1 support item.
In implementation of IPP Ver1.0,
it is not necessary to implement this item. SEQUENCE OF MltIppVersionsSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.4 |
mltIppVersionsSupportedEntry MltIppVersionsSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.4.1 |
mltIppVersionIfIndexThe index for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value
with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.4.1.1 |
mltIppVersionIndexIndex for uniquely showing 'ipp-version'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.4.1.2 |
mltIppVersionType'ipp-version' to support is shownro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.4.1.3 |
mltIppOperationSupportedTableTable which has 'operation-supported' attribute. SEQUENCE OF MltIppOperationSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.5 |
mltIppOperationSupportedEntry MltIppOperationSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.5.1 |
mltIppOperationIfIndexThe index for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value
with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.5.1.1 |
mltIppOperationIndexIndex which shows 'operation' to support.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.5.1.2 |
mltIppOperationTypeType of 'operation' is shownro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.5.1.3 |
mltIppOperationEnableThis shows Opeartor's Enable/Disable.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.5.1.4 |
mltIppCharSetSupportedTableTable which shows 'charset-supported.' SEQUENCE OF MltIppCharSetSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.6 |
mltIppCharSetSupportedEntry MltIppCharSetSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.6.1 |
mltIppCharSetIfIndexThe index for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value
with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.6.1.1 |
mltIppCharSetIndexIndex for uniquely showing 'charset'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.6.1.2 |
mltIppCharSetNameA parameter should follow regulation of IANA of the following.
http://www.iana.org/assignments/character-setro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.6.1.3 |
mltIppCharSetCodeThe code of 'charset' to support
A parameter should follow regulation of IANA of the following.
http://www.iana.org/assignments/character-setro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.6.1.4 |
mltIppNaturalLanguageSupportedTableTable which shows 'generated-natural-language-supported' attribute. SEQUENCE OF MltIppNaturalLanguageSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.7 |
mltIppNaturalLanguageSupportedEntry MltIppNaturalLanguageSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.7.1 |
mltIppNaturalLangIfIndexThe index for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value
with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.7.1.1 |
mltIppNaturalLangIndexIndex for uniquely showing 'natural-language'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.7.1.2 |
mltIppNaturalLangNameThe name of 'natural-language' to support.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.7.1.3 |
mltIppDocFormatSupportedTableTable which shows 'document-format-supported' attribute. SEQUENCE OF MltIppDocFormatSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.8 |
mltIppDocFormatSupportedEntry MltIppDocFormatSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.8.1 |
mltIppDocFormatIfIndexThe index for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value
with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.8.1.1 |
mltIppDocFormatIndexThe index for uniquely showing 'document-format'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.8.1.2 |
mltIppDocFormatNameThe name of 'document-format' to support is shownro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.8.1.3 |
mltIppCompressionSupportedTableTable which shows 'compression-supported.' SEQUENCE OF MltIppCompressionSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.10 |
mltIppCompressionSupportedEntry MltIppCompressionSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.10.1 |
mltIppCompressionIfIndexIndex for uniquely specifying NetworkInterface
to which IPP is set.
The value of index shall be the same value with
mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.10.1.1 |
mltIppCompressionIndexIndex for uniquely showing 'compression'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.10.1.2 |
mltIppCompressionType'compression' currently supported is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.2.10.1.3 |
mltNetIppJobTemplateAttribute OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3 |
mltNetIppJobTemplateGeneralTableThe table for showing the general information about
Job Template Attribute of IPP. SEQUENCE OF MltNetIppJobTemplateGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1 |
mltNetIppJobTemplateGeneralEntry MltNetIppJobTemplateGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1 |
mltIppJobTemplateGeneralIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.1 |
mltIppJobPriorityDefault'job-priority-default' attribute is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.2 |
mltIppJobPrioritySupported'job-priority-supported' attribute is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.3 |
mltIppJobHoldUntilDefault'job-hold-until-default' attribute is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.4 |
mltIppJobSheetsDefault'ipp-job-sheets-default' attribute is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.5 |
mltIppCopiesDefault'copies-default' attribute is shown.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.6 |
mltIppCopiesMaxSupported'copies-supported' attribute is shown.
Since MIN value is surely 1, only MAX is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.7 |
mltIppFinishingsDefault'finishings-default' attribute is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.8 |
mltIppPageRangesSupported'page-ranges-supported' attribute is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.9 |
mltIppSidesDefault'sides-default' attribute is shown.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.10 |
mltIppNumberUpDefault'number-up-default' attribute is shown.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.11 |
mltIppOrientationRequestedDefault'orientation-requested-default' attribute is shown.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.12 |
mltIppMediaDefault'media-default' attribute is shown.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.13 |
mltIppPrinterResolutionDefault'printer-resolution-default' attribute is shown.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.14 |
mltIppPrintQualityDefault'print-quality-default' attribute is shown.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.1.1.15 |
mltIppJobHoldUntilSupportedTableTable which shows 'job-hold-until-supported' attribute. SEQUENCE OF MltIppJobHoldUntilSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.2 |
mltIppJobHoldUntilSupportedEntry MltIppJobHoldUntilSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.2.1 |
mltIppJobHoldUntilIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.2.1.1 |
mltIppJobHoldUntilIndexIndex for uniquely showing 'job-hold-until'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.2.1.2 |
mltIppJobHoldUntilTypeType of 'job-hold-until' to support.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.2.1.3 |
mltIppJobSheetsSupportedTableTable which shows 'ipp-job-sheets-supported'. SEQUENCE OF MltIppJobSheetsSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.3 |
mltIppJobSheetsSupportedEntry MltIppJobSheetsSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.3.1 |
mltIppJobSheetsIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.3.1.1 |
mltIppJobSheetsIndexIndex for uniquely showing 'job-sheets'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.3.1.2 |
mltIppJobSheetsTypeType of 'job-sheets' to support is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.3.1.3 |
mltIppFinishingsSupportedTableTable which shows 'finishings-supported'. SEQUENCE OF MltIppFinishingsSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.4 |
mltIppFinishingsSupportedEntry MltIppFinishingsSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.4.1 |
mltIppFinishingsIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.4.1.1 |
mltIppFinishingsIndexIndex for uniquely showing 'finishings'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.4.1.2 |
mltIppFinishingsTypeType of 'finishings' to support.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.4.1.3 |
mltIppSidesSupportedTableTable which shows 'sides-supported' attribute. SEQUENCE OF MltIppSidesSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.5 |
mltIppSidesSupportedEntry MltIppSidesSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.5.1 |
mltIppSidesIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.5.1.1 |
mltIppSidesIndexIndex for uniquely showing 'sides'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.5.1.2 |
mltIppSidesTypeType of 'sides' to supportro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.5.1.3 |
mltIppNumberUpSupportedTableTable which shows 'number-up-supported'. SEQUENCE OF MltIppNumberUpSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.6 |
mltIppNumberUpSupportedEntry MltIppNumberUpSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.6.1 |
mltIppNumberUpIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.6.1.1 |
mltIppNumberUpIndexIndex for uniquely showing 'number-up'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.6.1.2 |
mltIppNumberUpTypeThe 'number-up' value to support is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.6.1.3 |
mltIppOrientationRequestedSupportedTable'orientation-requested-supported' attribute is shown. SEQUENCE OF MltIppOrientationRequestedSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.7 |
mltIppOrientationRequestedSupportedEntry MltIppOrientationRequestedSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.7.1 |
mltIppOrientationRequestedIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.7.1.1 |
mltIppOrientationRequestedIndexIndex for uniquely showing 'orientation-requested'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.7.1.2 |
mltIppOrientationRequestedTypeType of 'orientation-requested' to support.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.7.1.3 |
mltIppMediaSupportedTableTable which shows 'media-supported' attribute. SEQUENCE OF MltIppMediaSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8 |
mltIppMediaSupportedEntry MltIppMediaSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8.1 |
mltIppMediaIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8.1.1 |
mltIppMediaIndexIndex for uniquely showing 'media'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8.1.2 |
mltIppMediaNameThe name of 'media' currently supported.
Refer to Bergman, R, 'Media Size Standardized Names',
PWG Draft Standard D0.5, March 26, 2001.ro OCTET STRING .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8.1.3 |
mltIppMediaTypemediatype of 'media' currently supported.ro OCTET STRING .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8.1.4 |
mltIppMediaColorThe color of 'media' currently supported.ro OCTET STRING .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8.1.5 |
mltIppMediaInputTrayTray to which 'media' currently supported is set.ro OCTET STRING .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.8.1.6 |
mltPrinterResolutionSupportedTableTable which shows 'printer-resolution-supported'. SEQUENCE OF MltPrinterResolutionSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.9 |
mltPrinterResolutionSupportedEntry MltPrinterResolutionSupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.9.1 |
mltPrinterResolutionIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.9.1.1 |
mltPrinterResolutionIndexIndex for uniquely showing 'printer-resolution'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.9.1.2 |
mltPrinterResolutionFeedDirThe value of Feed direction of 'printer-resolution' to support.ro Integer32 .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.9.1.3 |
mltPrinterResolutionXFeedDirThe value of XFeed direction of 'printer-resolution' to support.ro Integer32 .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.9.1.4 |
mltPrinterResolutionUnitUnit of 'printer-resolution' to support .ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.9.1.5 |
mltPrintQualitySupportedTableTable which shows 'print-quality-supported' attribute SEQUENCE OF MltPrintQualitySupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.10 |
mltPrintQualitySupportedEntry MltPrintQualitySupportedEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.10.1 |
mltPrintQualityIfIndexThe index for uniquely specifying NetworkInterface to
which IPP is set. The value of index shall be the same
value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.10.1.1 |
mltPrintQualityIndexIndex for uniquely showing 'print-quality'.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.10.1.2 |
mltPrintQualityTypeType of 'print-quality' to support.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.14.3.10.1.3 |
mltNetSlp OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17 |
mltNetSlpGeneralTableTable for showing the general information of SLP. SEQUENCE OF MltNetSlpGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1 |
mltNetSlpGeneralEntry MltNetSlpGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1.1 |
mltNetSlpIfIndexThe index for uniquely specifying NetworkInterface to which SLP is set.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1.1.1 |
mltNetSlpEnableEnable/Disable of service of SLP is set up.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1.1.2 |
mltNetSlpPortNumberPort number of SLP is shown.
Default is 427.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1.1.3 |
mltNetSlpMTUMTU value of LP gas is shown.
Default shall be 1400.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1.1.4 |
mltNetSlpTTLTTL value of SLP is shown.
Default shall be 255.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1.1.5 |
mltNetSlpBroadcastSupportSupport of multicasting and broadcasting is shown.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.1.1.6 |
mltNetSlpConfigTableThe table for showing the setup information of SLP. SEQUENCE OF MltNetSlpConfigEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.2 |
mltNetSlpConfigEntry MltNetSlpConfigEntry .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.2.1 |
mltNetSlpConfigIfIndexThe index for uniquely specifying NetworkInterface to which SLP is set.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.2.1.1 |
mltNetSlpIndexIndex for showing a specific entry.
Default is 1.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.2.1.2 |
mltNetSlpServiceThe character string which shows the service registered into DA.
Example: 'service:printer:help'ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.2.1.3 |
mltNetSlpScopeThe character string which shows the scope of SLP.
Default character string is 'default'.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.2.1.4 |
mltNetSlpLifetimeThe value which shows LifeTime of a registration.
A unit is second. Default is 10800 (3 hours).rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.7.17.2.1.5 |
mltNetNetWare OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.8 |
mltNetNwGeneralTableTable with the basic information of NetWare relation
which NetworkInterface has SEQUENCE OF MltNetNwGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.1 |
mltNetNwGeneralEntry MltNetNwGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.1.1 |
mltNetNwIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.1.1.1 |
mltNetNwDefaultThe command which restores all setup about NetWare to FactoryDefault.
When resetToDefault(2) is set, an agent side shall surely return Reply.
In principle, when resetToDefault(2) is set, about the timing
in which the setup returns to default depends on an implementation
and it does not define in MIB.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.8.1.1.2 |
mltNetNwFrameTypeConfigA setup of FrameType used by NetWare (IPX).
It is set by using Bitmap of the following.
1 (Auto-Sense) is recommended for the Default.
Although Auto-Sense and other value do not exist together,
about Binding two or more FrameTypes simultaneously,
it is dependent on the implementation of a model.
Bit Value FrameType
0 1 Reserved
1 2 802.3
2 4 EthernetII
3 8 802.3-SNAP
4 16 802.2 (4)
5 32 Reserved
6 64 802.5-TokenRing
7 128 TokenRing-SNAPrw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.1.1.3 |
mltNetNwPrintModeThe mode of NetworkInterface used by NetWare is set up.
Default shall be pServerMode(1). When not supporting NPrinter,
it shall be the implementation of RO.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.8.1.1.4 |
mltNetNwFrameTableThe information of FrameType which is working in NetWare is shown. SEQUENCE OF MltNetNwFrameEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.2 |
mltNetNwFrameEntry MltNetNwFrameEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.2.1 |
mltNetNwFrameIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.2.1.1 |
mltNetNwFrameIndexIndex for showing FrameType which is operating by NetworkInterface.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.2.1.2 |
mltNetNwFrameTypeFrameType is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.8.2.1.3 |
mltNetNwNetworkNumberNetwork number which each FrameType is using is displayed.
The notation of a number is indicated by Hexadecimal numbers.ro OCTET STRING .1.3.6.1.4.1.2590.1.1.2.1.5.8.2.1.4 |
mltNetNwPserverTableThe table for showing the setup of PrintServer. SEQUENCE OF MltNetNwPserverEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.3 |
mltNetNwPserverEntry MltNetNwPserverEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1 |
mltNetNwPsIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.1 |
mltNetNwPsIndexIndex for uniquely showing PrintServer.
The number of indexes depends on an implementation.
The number of indexes which can be implemented and
the number of defaults depends on an implementation.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.2 |
mltNetNwPsNameThe name of PrintServer.
Default is dependent on an implementation.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.3 |
mltNetNwPsPasswdPassword of PrintServer.
Default is Null.
When it is gotten, applying scramble to value is not accepted.
About security, support by the management tool side.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.4 |
mltNetNwPsModeThe mode in which PrintServer supports is shown.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.5 |
mltNetNwPsPrefFServerValue of Preferred FileServer used in Bindery mode.
It shall be NullString when set only to NDS mode.
In the system which does not set up PreferredFileServer,
implement '-' (hyphen) and shall be RO.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.6 |
mltNetNwPsPrefTreeValue of Preferred Tree used in NDS mode.
It shall be NullString when set only to Bindery mode.
In the system which does not set up PreferredTree,
implement 'N/A' and shall be RO.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.7 |
mltNetNwPsPrefContextValue of Preferred Context used in NDS mode.
It shall be NullString when set only to Bindery mode.
In the system which does not set up PreferredContext,
implement 'N/A' and shall be RO.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.8 |
mltNetNwPsPollingRateThe interval at which PrinteServer scans Queue. Unit is second.
Range which can be set up shall be 1 - 65535. Default is 1 (second).rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.3.1.9 |
mltNetNwQueueTableTable which shows the information of Queue which NetworkInterface has managed. SEQUENCE OF MltNetNwQueueEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.4 |
mltNetNwQueueEntry MltNetNwQueueEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.4.1 |
mltNetNwQueueIndexThe index for uniquely showing Queue.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.4.1.1 |
mltNetNwQueueNameThe name of Queue.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.8.4.1.2 |
mltNetNwQueueRefIfIndexNetworkInterface which is managing Queue is shown.
Use the value of mltNetNwPsIfIndex.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.4.1.3 |
mltNetNwQueueRefPsIndexPrintServer which is managing Queue is shown.
Use the value of mltNetNwPsIndex.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.4.1.4 |
mltNetNwQueueStatusThe state of Queue is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.8.4.1.5 |
mltNetNwNPrinterTableTable which shows the information of NPrinter
which NetworkInterface is managing.
In the system without Nprinter function,
it is not necessary to implement this table. SEQUENCE OF MltNetNwNPrinterEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.5 |
mltNetNwNPrinterEntry MltNetNwNPrinterEntry .1.3.6.1.4.1.2590.1.1.2.1.5.8.5.1 |
mltNetNwNPrinterIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.5.1.1 |
mltNetNwNPrinterIndexIndex for uniquely showing Nprinter.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.5.1.2 |
mltNetNwNPrinterNameThe name of Nprinter.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.8.5.1.3 |
mltNetNwNPrinterNumberPrinter number of NPrinter. Default shall be 1.rw INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.8.5.1.4 |
mltNetAppleTalk OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.9 |
mltNetAppleTalkGeneralTableTable with the basic information of AppleTalk relation
which NetworkInterface has. SEQUENCE OF MltNetAppleTalkGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.9.1 |
mltNetAppleTalkGeneralEntry MltNetAppleTalkGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.9.1.1 |
mltNetAtIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.9.1.1.1 |
mltNetAtDefaultThe command which restores all setup about AppleTalk to FactoryDefault.
When resetToDefault(2) is set, an agent side shall surely return Reply.
In principle, when resetToDefault(2) is set, about the timing
in which the setup returns to default depends on an implementation
and it does not define in MIB.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.9.1.1.2 |
mltNetAtNetNumberNetworkNumber in Network of AppleTalk.
Display the value acquired at the time of Apple Talk starting.
When it is unknown, shall be -2 (unknown).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.9.1.1.3 |
mltNetAtNodeNumberNode Number in Network of AppleTalk.
Display the value acquired at the time of Apple Talk starting.
When it is unknown, shall be -2 (unknown).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.9.1.1.4 |
mltNetAtDesiredZoneSetting value of Zone name in Apple Talk.
Default shall be '*'.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.9.1.1.5 |
mltNetAtCurrentZoneZone name to which device is operating.
In environment of operation, it may differ from the above-mentioned value.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.9.1.1.6 |
mltNetAtPrinterTableThe table for showing the setup of AppleTalkPrinter. SEQUENCE OF MltNetAtPrinterEntry .1.3.6.1.4.1.2590.1.1.2.1.5.9.2 |
mltNetAtPrinterEntry MltNetAtPrinterEntry .1.3.6.1.4.1.2590.1.1.2.1.5.9.2.1 |
mltNetAtPrinterIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.9.2.1.1 |
mltNetAtPrinterIndexThe index for uniquely showing AppleTalkPrinter.
The number of indexed depends on an implementation.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.9.2.1.2 |
mltNetAtPrinterNameThe name of AppleTalkPrinter.
When performing the operation, the name in an actual
operation environment should be shown.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.9.2.1.3 |
mltNetAtPrinterTypeType of AppleTalk Printer. Default is 'LaserWriter'.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.9.2.1.4 |
mltNetSmb OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.2.1.5.10 |
mltNetSmbGeneralTableThe table with the basic information of SMB relation
which NetworkInterface has. SEQUENCE OF MltNetSmbGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.10.1 |
mltNetSmbGeneralEntry MltNetSmbGeneralEntry .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1 |
mltNetSmbIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1.1 |
mltNetSmbDefaultThe command which restores all setup about SMB to FactoryDefault.
When resetToDefault(2) is set, an agent side shall surely return Reply.
In principle, when resetToDefault(2) is set, about the timing
in which the setup returns to default depends on an implementation
and it does not define in MIB.rw Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1.2 |
mltNetSmbWorkGroupNameWorkGroup name in Windows Network. Default shall be 'WORKGROUP'.
Only the implementation of capital letters is accepted about this item.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1.3 |
mltNetSmbHostNameHost name in Windows Network. Default is dependent on an implementation.
Only the implementation of capital letters is accepted about this itemrw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1.4 |
mltNetSmbWinsSupportSets up the availability of use of WINS.
Default is disable(2).ro Enumeration .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1.5 |
mltNetSmbWinsPrimaryServerSets up PrimaryServer of Wins. Default is 0.0.0.0ro IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1.6 |
mltNetSmbWinsSecondaryServerSets up Secondary Server of Wins. Default is 0.0.0.0.ro IpAddress .1.3.6.1.4.1.2590.1.1.2.1.5.10.1.1.7 |
mltNetSmbPrinterTableThe table which has the information of Printer relation in SMB. SEQUENCE OF MltNetSmbPrinterEntry .1.3.6.1.4.1.2590.1.1.2.1.5.10.2 |
mltNetSmbPrinterEntry MltNetSmbPrinterEntry .1.3.6.1.4.1.2590.1.1.2.1.5.10.2.1 |
mltNetSmbPrinterIfIndexThe index for uniquely showing NetworkInterface.
The value of index shall be the same value with mltNetGeneralIndex (ifIndex).ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.10.2.1.1 |
mltNetSmbPrinterIndexIndex for uniquely showing Printer in SMB.
The number of indexes depends on an implementation.ro INTEGER .1.3.6.1.4.1.2590.1.1.2.1.5.10.2.1.2 |
mltNetSmbPrinterNamePrinter name in SMB. Default is dependent on the implementation of a model.
About the availability of Printer name change shall also be dependent on
an implementation.rw DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.10.2.1.3 |
mltNetSmbPrinterDescrExplanation of Printer.
About the written contents is dependent on the implementation of
a model; however, implementation of NullString is not accepted.
At least input the character string which is same as Default Printer name.ro DisplayString .1.3.6.1.4.1.2590.1.1.2.1.5.10.2.1.4 |
mltDevice OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.3 |
mltJob OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.4 |
mltJobManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.4.1 |
mltJmMibVersionThe standardization version of MIB implemented in JobManagement relation.
This indicates the version of the Private Job Management MIB that
is implemented.
There are some mib objects that indicate the Mib Version.
(mltSysMibVersion, mltPrtMibVersion, mltScnMibVersion, mltNetMiIbVersion,
mltJmMibVersion) But, the each mib version should be same version.
Especially, the each major versions must be same.
The version information of Standard MIB specification.
General form is AA.BC.
AA is indicating major revision, and B and C is
minor revision. Decimal point is ASCII-coded period.ro DisplayString .1.3.6.1.4.1.2590.1.1.4.1.1 |
mltJmGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.4.1.2 |
mltJmGeneralTableThis table indicates the general information about
Job Management.
This table contains the number of active jobs, oldest/newest
jobs, the number of preservation of a history, and so on. SEQUENCE OF MltJmGeneralEntry .1.3.6.1.4.1.2590.1.1.4.1.2.1 |
mltJmGeneralEntry MltJmGeneralEntry .1.3.6.1.4.1.2590.1.1.4.1.2.1.1 |
mltJmGeneralJobSetIndexA unique value for each job set in this MIB.
JobSet shows the system of the serial number used for Job management.
In managing a serial number to 1 by all the functions of
a device according to 'Job management standard specifications',
it sets the number of JobSets to 1.
In managing a serial number for every functional classification,
only the number of functional classifications shall have JobSet.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.2.1.1.1 |
mltJmGeneralNumberOfActiveJobsThe current number of 'active' jobs in the mltJmJobTable.
when the device has no active jobs, this value should be 0.
The device that cannot support to count active jobs
should implement (-2) as fixed value.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.2.1.1.2 |
mltJmGeneralOldestActiveJobIndexThe mltJmJobIndex of the oldest job that is still in
one of the 'active' states.
In other words, the index of the 'active' job that has
been in the job tables the longest.
If there are no active jobs, this value should be 0.
The device that cannot support to count active jobs
should implement (-2) as fixed value.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.2.1.1.3 |
mltJmGeneralNewestActiveJobIndexThe mltJmJobIndex of the newest job that is in one of the
'active' states.
In other words, the index of the 'active' job that has been
most recently added to the job tables.
If there are no active jobs, this value should be 0.
The device that cannot support to count active jobs
should implement (-2) as fixed value.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.2.1.1.4 |
mltJmGeneralJobPersistenceThe number holding the information (Index) on Job
is specified after an end of Job.
About the number which should hold the history information
on Job, it shall be dependent on implementation of a model.
If a device can not support this, '-2'(Not Support) should
be implemented.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.2.1.1.5 |
mltJmGeneralJobSetTypeThe type of JobSet.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.2.1.1.6 |
mltJmJob OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.4.1.3 |
mltJmJobTableThe table indicates the detailed information of jobs. SEQUENCE OF MltJmJobEntry .1.3.6.1.4.1.2590.1.1.4.1.3.1 |
mltJmJobEntry MltJmJobEntry .1.3.6.1.4.1.2590.1.1.4.1.3.1.1 |
mltJmJobJobSetIndexA unique value for each job set in this MIB.
JobSet shows the system of the serial number used for Job management.
This index is the same as mltJmGeneralJobSetIndex.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.1 |
mltJmJobIndexThe sequential, monotonously increasing identifier index for
the job generated by the device when that device accepted the job. [
This Index shall hold also in power supply On./Off.
After attainment is automatically re-started from 1 to maximum.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.2 |
mltJmJobFunctionThis value indicates the function of job sender.
receiveJob(3) may include FAX and iFAX jobs.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.3 |
mltJmJobStatusThis value indicates the status of job.rw Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.4 |
mltJmJobReceivedTimeRegistration time of Job.
About TimeZone, it is not indispensable.
When you cannot perform acquisition of time information,
be referred to as Null (Zero-Length).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.6 |
mltJmJobCompleteTimeCompletion time of Job.
About TimeZone, it is not indispensable.
When you await and completion time cannot be
written by Job etc., be referred to as Null (Zero-Length).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.7 |
mltJmJobPriorityIt is used when controlling the priority of Job.
When device cannot support to change of a priority,
this value should be notSupported (0) as RO.
When device support to change of a priority,
it uses the value of 1 to 5. In this case,
implementation as RW is mandatory.rw Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.8 |
mltJmJobDivNumberThe division number of job.
0-999 is used.
When the device does not perform division control,
this value should be (-2). (-2) means unknown.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.9 |
mltJmJobOwnerThe owner of job.
If device cannot detect the name of owner ,
this value should be '-', of 'unknown'.
The implementation of zero-length is not accepted.ro DisplayString .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.10 |
mltJmJobTypeThe type of job.
When the job type is not detected,
this value should be other(0).ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.11 |
mltJmJobNameThe name of job.
If device cannot detect job name,
this value should be '-', of 'unknown'.
The implementation of zero-length is not accepted.ro DisplayString .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.12 |
mltJmJobDocPageNumbersThe page numbers of job.
When device cannot detect page numbers
this value should be (-2).ro Integer32 .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.13 |
mltJmJobDocCopyNumbersNumber of copies of Job.
When device cannot detect the number of copies,
this value should be (-2).ro Integer32 .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.14 |
mltJmJobPageSizeThe paper/picture size of Job.
In case of output job, this value shows output paper size.
Incase of scanned job, this value shows the size of picture.
In Job of mixed size, the last page should be displayed.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.15 |
mltJmJobDestinationThe destination of job.
If destination is unknown, this value should be '-'.ro DisplayString .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.16 |
mltJmJobDataSizeThe data size of job. A unit is KByte.
In case of printing job, this value should be the size of
printing date.
In case of send job, this value should be not the size of picture
but the size of transefered data.
When the device cannot detect data size, this value should be (-2).ro Integer32 .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.18 |
mltJmJobColorModeThe type of color mode.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.19 |
mltJmJobFormatThe data format of job.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.20 |
mltJmJobXResolutionResolution of the X direction of Job.
A unit is dpi.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.21 |
mltJmJobYResolutionResolution of the Y direction of Job.
A unit is dpi.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.22 |
mltJmJobDuplexA duplex setting of job.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.23 |
mltJmJobOutputPagesThe page numbers which the output ended in Job.
If a device can not recognize this information,
'-2'(Not Support) should be implemented.ro Integer32 .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.25 |
mltJmJobOutputSheetsThe sheets numbers which the output ended in Job.
If a device can not recognize this information,
'-2'(Not Support) should be implemented.ro Integer32 .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.26 |
mltJmJobMediaTypeThe media type of job.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.3.1.1.27 |
mltJmReport OBJECT IDENTIFIER .1.3.6.1.4.1.2590.1.1.4.1.4 |
mltJmReportTableTable for setting up the report of job history
management information.
If a device does not support all this functions,
this table needs not to be implemented. SEQUENCE OF MltJmReportEntry .1.3.6.1.4.1.2590.1.1.4.1.4.1 |
mltJmReportEntry MltJmReportEntry .1.3.6.1.4.1.2590.1.1.4.1.4.1.1 |
mltJmReportIndexA unique value for each report destinations.ro INTEGER .1.3.6.1.4.1.2590.1.1.4.1.4.1.1.1 |
mltJmReportAddressE-mail address of report destination.rw DisplayString .1.3.6.1.4.1.2590.1.1.4.1.4.1.1.2 |
mltJmKeepAliveCountThe counter that controls existence of transmission
to Job history information.
Default shall set to 0 and, in 0, it shall not transmit to the specified address.
A positive number is set when demanding transmission of Job history information.
Transmission will be stopped, if it subtracts every 1 and is set to 0,
whenever this counter will pass on the 1st.
The side that demands transmission of Job history information
makes transmission continue by rewriting this counter periodically.
Moreover, when E-mail environment is not ready
(grade to which the SMTP server is not set), display -1.
When there is no transmitting control function, this value should be -3.rw INTEGER .1.3.6.1.4.1.2590.1.1.4.1.4.1.1.3 |
mltJmReportIntervalThe number of cases that transmits Job history at once is set up.rw Enumeration .1.3.6.1.4.1.2590.1.1.4.1.4.1.1.5 |
mltJmReporIntervalSelectionThe maximum of the number of cases to which
once transmits Job history is shown.ro Enumeration .1.3.6.1.4.1.2590.1.1.4.1.4.1.1.6 |
mltJmReportRequestThe request command of reporting job history.
default : 0
send request : 1rw INTEGER .1.3.6.1.4.1.2590.1.1.4.1.4.1.1.7 |
mltDirectory OBJECT IDENTIFIER .1.3.6.1.4.1.2590.2 |