MADGERSW-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for MADGERSW-MIB.
62
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
madge OBJECT IDENTIFIER .1.3.6.1.4.1.494 |
RFC1155-SMI Unknown .1.3.6.1.4.1.494 |
ringswitch OBJECT IDENTIFIER .1.3.6.1.4.1.494.4 |
fanPSSpeedFailedThis trap is sent when the Power Supply fan has failed. TRAP-TYPE .1.3.6.1.4.1.494.4.0.1 |
fanExtSpeedFailedThis trap is sent when the external fan has failed. TRAP-TYPE .1.3.6.1.4.1.494.4.0.2 |
portFailedThis trap is sent when a port has auto-closed or
failed to open. TRAP-TYPE .1.3.6.1.4.1.494.4.0.3 |
brTestFailedThis trap is sent when the bridge test on a port
fails. TRAP-TYPE .1.3.6.1.4.1.494.4.0.4 |
ringswitchBase OBJECT IDENTIFIER .1.3.6.1.4.1.494.4.1 |
ringswitchBasePSFanSpeedThe number of revolutions per minute being reported by
the fan internal to the system power supply. If this
value is read as zero, the fan is no longer operatingro INTEGER .1.3.6.1.4.1.494.4.1.1 |
ringswitchBaseExtFanSpeedThe number of revolutions per minute being reported by
the external system fan. If this value is read as zero,
the fan is no longer operatingro INTEGER .1.3.6.1.4.1.494.4.1.2 |
ringswitchBaseRipSapSuppressionIf this variable is set to enable the system will
only forward broadcast-addressed IPX RIP and SAP
Response frames to those ports that have recently
sourced such a frame. This reduces the number of
gratuitous frames sent out on LANs that only
have IPX workstations attached.
A value of disable causes no special action to be
taken for such frames.rw Enumeration .1.3.6.1.4.1.494.4.1.3 |
ringswitchBaseAREConversionThis variable controls the action taken when
forwarding All Routes Explorer frames.
enable-first: convert all ARE frames with a RIF
length of 2 to STE frames.
enable-all: convert all ARE frames to STE frames.
enable-bcast-first: convert all ARE frames with the
broadcast destination address, with
a RIF length of 2 to STE frames.
enable-bcast-all: convert all ARE frames with the
broadcast destination address to
STE frames.
disable: follow normal forwarding rules for ARE
frames.rw Enumeration .1.3.6.1.4.1.494.4.1.4 |
ringswitchPort OBJECT IDENTIFIER .1.3.6.1.4.1.494.4.2 |
ringswitchPortTableA table that contains general port information. SEQUENCE OF RingswitchPortEntry .1.3.6.1.4.1.494.4.2.1 |
ringswitchPortEntry RingswitchPortEntry .1.3.6.1.4.1.494.4.2.1.1 |
ringswitchPortNumThe port number of the port for which this entry
contains Ringswitch management information.ro INTEGER .1.3.6.1.4.1.494.4.2.1.1.1 |
ringswitchPortRingStatusThe status of the ring to which this port is
connected.ro Enumeration .1.3.6.1.4.1.494.4.2.1.1.2 |
ringswitchPortAdapterStatusThe status of the adapter used by this port.ro Enumeration .1.3.6.1.4.1.494.4.2.1.1.3 |
ringswitchPortMediaTypeMedia type of the port.ro Enumeration .1.3.6.1.4.1.494.4.2.1.1.4 |
ringswitchPortIfModeNode or concentrator status of the port.rw Enumeration .1.3.6.1.4.1.494.4.2.1.1.5 |
ringswitchPortRingSpeedSpeed of the ring to which this port is connected.rw Enumeration .1.3.6.1.4.1.494.4.2.1.1.6 |
ringswitchPortTestStateCurrent state of the bridge test.ro Enumeration .1.3.6.1.4.1.494.4.2.1.1.7 |
ringswitchPortTestErrorResult of the bridge test.ro Enumeration .1.3.6.1.4.1.494.4.2.1.1.8 |
ringswitchPortTestPhaseCurrent phase of the bridge test.ro Enumeration .1.3.6.1.4.1.494.4.2.1.1.9 |
ringswitchPortSummaryThis is a three octet field which packs some of the
port attributes into a single mib entry. Each nibble
represents a different attribute of the port:
ifAdminStatus (most significant),
ringswitchPortRingStatus,
ringswitchPortAdapterStatus,
ringswitchPortMediaType,
ringswitchPortIfMode,
ringswitchPortRingSpeed,
ringswitchPortTestState,
ringswitchPortTestError (least significant)ro INTEGER .1.3.6.1.4.1.494.4.2.1.1.10 |
ringswitchPortAddressThe hard wired address of the port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.494.4.2.1.1.11 |
ringswitchPortLAAThe locally administered address of the port.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.494.4.2.1.1.12 |
ringswitchPortStationTypeWorkstations-only status of the port; if this is
limited, the port only has workstations on it, and
broadcast frames received on this port will not be
transmitted on other limited ports.rw Enumeration .1.3.6.1.4.1.494.4.2.1.1.13 |
ringswitchPortRPSEnableEnables or disables the Ring Parameter Server
function on the port. If this variable is set to
enabled, the port will enable the RPS functional
address, and respond to Request Parameters MAC
frames, supplying the port's segment number in
the response.rw Enumeration .1.3.6.1.4.1.494.4.2.1.1.14 |
ringswitchPortCutThruEnableEnables or disables cut-through switching on the
port. In some circumstances (e.g., 4 to 16 MB
switching), cut-through will always be disabled,
irrespective of the state of this variable.rw Enumeration .1.3.6.1.4.1.494.4.2.1.1.15 |
ringswitchPortInOctets48 bit version of the interface MIB counter
ifInOctets.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.16 |
ringswitchPortOutOctets48 bit version of the interface MIB counter
ifOutOctets.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.17 |
ringswitchPortSpecInFrames48 bit version of the Bridge MIB counter
srPortSpecInFrames.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.18 |
ringswitchPortSpecOutFrames48 bit version of the Bridge MIB counter
srPortSpecOutFrames.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.19 |
ringswitchPortApeInFrames48 bit version of the Bridge MIB counter
srPortApeInFrames.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.20 |
ringswitchPortApeOutFrames48 bit version of the Bridge MIB counter
srPortApeOutFrames.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.21 |
ringswitchPortSteInFrames48 bit version of the Bridge MIB counter
srPortSteInFrames.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.22 |
ringswitchPortSteOutFrames48 bit version of the Bridge MIB counter
srPortSteOutFrames.ro INTEGER48 .1.3.6.1.4.1.494.4.2.1.1.23 |
ringswitchSR OBJECT IDENTIFIER .1.3.6.1.4.1.494.4.3 |
ringswitchSRAdminStateThe desired state of source routing; allows
source routing to be enabled or disabled for
the whole Ringswitchrw Enumeration .1.3.6.1.4.1.494.4.3.1 |
ringswitchSROperStateThe actual state of source routing.
If ringswitchSRAdminState is 'disabled' then this
state will be inactive. If ringswitchSRAdminState is
'enabled' then this state should be 'active', but if
for some reason the Ringswitch is unable to perform
source routing then this state will be 'inactive'.ro Enumeration .1.3.6.1.4.1.494.4.3.2 |
ringswitchLCD OBJECT IDENTIFIER .1.3.6.1.4.1.494.4.4 |
ringswitchLCDTotalDisplaysThe total number of displays on the Ringswitch.ro INTEGER .1.3.6.1.4.1.494.4.4.1 |
ringswitchLCDCurrentDisplayThe number of the display that the Ringswitch is
currently showing.rw INTEGER .1.3.6.1.4.1.494.4.4.2 |
ringswitchLCDCurrentMsgTextThe actual lcd message text, including a carriage
return after the first line, and a null character
after the second line.ro LCDText .1.3.6.1.4.1.494.4.4.3 |
ringswitchLCDTableA table that contains all of the lcd messages that
could be displayed by the Ringswitch if the user
were to flick the paddle switch. SEQUENCE OF RingswitchLCDTableEntry .1.3.6.1.4.1.494.4.4.4 |
ringswitchLCDTableEntryArguments and message number details for each
LCD entry. RingswitchLCDTableEntry .1.3.6.1.4.1.494.4.4.4.1 |
ringswitchLCDNumThe lcd number of the lcd for which this entry
contains display details.ro INTEGER .1.3.6.1.4.1.494.4.4.4.1.1 |
ringswitchLCDMsgTextThe actual lcd message text, including a carriage
return after the first line, and a null character
after the second line.ro LCDText .1.3.6.1.4.1.494.4.4.4.1.2 |
ringswitchLAN OBJECT IDENTIFIER .1.3.6.1.4.1.494.4.5 |
ringswitchLANTableA table that contains virtual LAN information
configured into the Ringswitch by the network
administrator. SEQUENCE OF RingswitchLANEntry .1.3.6.1.4.1.494.4.5.1 |
ringswitchLANEntryName and status information associated with each
virtual LAN entry. RingswitchLANEntry .1.3.6.1.4.1.494.4.5.1.1 |
ringswitchLANIndexThe virtual LAN number for which this entry
contains virtual LAN details.ro INTEGER .1.3.6.1.4.1.494.4.5.1.1.1 |
ringswitchLANNameThe name that the administrator has given this
virtual LAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.494.4.5.1.1.2 |
ringswitchLANPermeableIn an 'impermeable' group, broadcast frames which
were received on a port in the group, but were not
originated in the group, are discarded. In a
'permeable' group, such frames are transmitted on
the other ports in the group.rw Enumeration .1.3.6.1.4.1.494.4.5.1.1.3 |
ringswitchLANStatusThe current status of this virtual LAN, a status of
'invalid' indicates that the virtual LAN's associated
name and ring list are meaningless until the group is
validated.rw Enumeration .1.3.6.1.4.1.494.4.5.1.1.4 |
ringswitchLANRingTableA table that contains the rings associated with
a virtual LAN that has been configured into the
Ringswitch by the network administrator. SEQUENCE OF RingswitchLANRingEntry .1.3.6.1.4.1.494.4.5.2 |
ringswitchLANRingEntryName and status information associated with each
virtual LAN ring table entry. RingswitchLANRingEntry .1.3.6.1.4.1.494.4.5.2.1 |
ringswitchLANRingGroupThe virtual LAN index for which this entry
contains virtual LAN ring details.ro INTEGER .1.3.6.1.4.1.494.4.5.2.1.1 |
ringswitchLANRingIndexThe ring index for which this entry
contains virtual LAN ring details.ro INTEGER .1.3.6.1.4.1.494.4.5.2.1.2 |
ringswitchLANRingNumThe ring number contained in the virtual LAN.rw INTEGER .1.3.6.1.4.1.494.4.5.2.1.3 |
ringswitchLANRingStatusThe current status of this virtual LAN ring entry,
a status of 'invalid' indicates that the ring entry
is not in use and the associated ring number is
meaningless.rw Enumeration .1.3.6.1.4.1.494.4.5.2.1.4 |