Lambdatrail2s-MIB
AI MIB Summary
The Lambdatrail2s-MIB facilitates SNMP-based monitoring and management of Deltanet Lambdatrail2-S devices, specifically enabling the retrieval of operational status, interface statistics, and system health metrics for hardware running firmware 1.1.0 or higher.
The MIB module for managing Deltanet Lambdatrail2-S device. Needs firmware 1.1.0 or higher.
Main OID:
lambdatrail2s.1.3.6.1.4.1.35616.5
149
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
149 total| Object Name |
|---|
lambdatrail2sThe MIB module for managing Deltanet Lambdatrail2-S device. Needs firmware 1.1.0 or higher. MODULE-IDENTITY .1.3.6.1.4.1.35616.5 |
lt2sNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.35616.5.0 |
lt2sMgmtStartupThe agent has started up and is running. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.1 |
lt2sMgmtAuthenticationFailureLogin has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.2 |
lt2sTemperatureHighDevice temperature is high. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.3 |
lt2sTemperatureNormalDevice temperature is back to normal. Lower than 40 degrees celsius. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.4 |
lt2sPowerSupplyPluggedInA power is plugged in. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.5 |
lt2sPowerSupplyPluggedOutA power is plugged out. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.6 |
lt2sPowerNormalA power goes on. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.7 |
lt2sPowerFailureA power goes off. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.8 |
lt2sFanOnA fan goes on. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.9 |
lt2sFanOffA fan goes off. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.10 |
lt2sFanFailureA fan goes to failure. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.11 |
lt2sMgmtSfpPluggedInSFP transceiver is plugged in on management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.12 |
lt2sMgmtSfpPluggedOutSFP transceiver is plugged out on management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.13 |
lt2sMgmtLinkUpA link goes up in one of the management ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.14 |
lt2sMgmtLinkDownA link goes down in one of the management ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.15 |
lt2sMgmtTxLowTransceiver TX power is low in the management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.16 |
lt2sMgmtTxHighTransceiver TX power is high in the management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.17 |
lt2sMgmtTxNormalTransceiver TX power is normal in the management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.18 |
lt2sMgmtRxLowTransceiver RX power is low in the management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.19 |
lt2sMgmtRxHighTransceiver RX power is high in the management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.20 |
lt2sMgmtRxNormalTransceiver RX power is normal in the management port. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.21 |
lt2sPortEnabledPort is administrative enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.22 |
lt2sPortDisabledPort is administrative disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.23 |
lt2sPortResetedA reset in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.24 |
lt2sPortThermalShutdownA thermal shut down in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.25 |
lt2sPortThermalWakeupA thermal wakeup in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.26 |
lt2sLinePluggedInA SFP transceiver is plugged in, on one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.27 |
lt2sClientPluggedInA SFP transceiver is plugged in, on one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.28 |
lt2sLinePluggedOutA SFP transceiver is plugged out, on one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.29 |
lt2sClientPluggedOutA SFP transceiver is plugged out, on one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.30 |
lt2sLineLinkUpA SFP transceiver's link goes up in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.31 |
lt2sClientLinkUpA SFP transceiver's link goes up in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.32 |
lt2sLineLinkDownA SFP transceiver's link goes down in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.33 |
lt2sClientLinkDownA SFP transceiver's link goes down in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.34 |
lt2sLineLoopOnA Line loop is activated in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.35 |
lt2sLineLoopOffA Line loop is turned off in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.36 |
lt2sClientLoopOnA Client loop is activated in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.37 |
lt2sClientLoopOffA Client loop is turned off in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.38 |
lt2sPortTxLowA SFP transceiver TX power is low in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.39 |
lt2sPortTxHighA SFP transceiver TX power is high in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.40 |
lt2sPortTxNormalA SFP transceiver TX power is normal in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.41 |
lt2sPortRxLowA SFP transceiver RX power is low in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.42 |
lt2sPortRxHighA SFP transceiver RX power is high in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.43 |
lt2sPortRxNormalA SFP transceiver RX power is normal in one of the ports. NOTIFICATION-TYPE .1.3.6.1.4.1.35616.5.0.44 |
lt2sAgent OBJECT IDENTIFIER .1.3.6.1.4.1.35616.5.1 |
lt2sDescriptionShows the System Description.ro DisplayString .1.3.6.1.4.1.35616.5.1.1 |
lt2sDeviceTypeShows the Device Type.ro DisplayString .1.3.6.1.4.1.35616.5.1.2 |
lt2sHwRevisionShows the Device Type.ro DisplayString .1.3.6.1.4.1.35616.5.1.3 |
lt2sManufacturingDateShows the Device Type.ro DisplayString .1.3.6.1.4.1.35616.5.1.4 |
lt2sSerialNumberShows the serial number of the device.ro DisplayString .1.3.6.1.4.1.35616.5.1.5 |
lt2sSystemNameThe assigned system name.rw DisplayString .1.3.6.1.4.1.35616.5.1.6 |
lt2sSystemLocationSystem location.rw DisplayString .1.3.6.1.4.1.35616.5.1.7 |
lt2sSystemContactThe responsible person.rw DisplayString .1.3.6.1.4.1.35616.5.1.8 |
lt2sSystemUptimeShows the time since the last restart of the management agent.ro DisplayString .1.3.6.1.4.1.35616.5.1.9 |
lt2sFirmwareVersionShows the software version of the agent running image.ro DisplayString .1.3.6.1.4.1.35616.5.1.10 |
lt2suCVersionShows the firmware version of the micro controller.ro DisplayString .1.3.6.1.4.1.35616.5.1.11 |
lt2sSaveRunningCfgSet this variable will save current configuration. The value is set back to 1 after succeed.rw Enumeration .1.3.6.1.4.1.35616.5.1.12 |
lt2sResetAgentSet this variable will reset the agent. The value is set back to 1 after reset.rw Enumeration .1.3.6.1.4.1.35616.5.1.13 |
lt2sSnmpGetCommunityThe get community, read only.rw DisplayString .1.3.6.1.4.1.35616.5.1.14 |
lt2sSnmpSetCommunityThe set community, read/write.rw DisplayString .1.3.6.1.4.1.35616.5.1.15 |
lt2sIp4DHCPDHCP enable or disable. Default is offrw Enumeration .1.3.6.1.4.1.35616.5.1.16 |
lt2sIp4AddressThe agent's administrative IP address. The current operational IP address can be obtained from the ipAdEntAddr in the ipAddrTable. This parameter will take effect only after a agent restart or agent reset. This parameter will always be updated in the EEPROM.rw IpAddress .1.3.6.1.4.1.35616.5.1.17 |
lt2sIp4MaskThe agent's administrative IP subnet mask. The current operational IP subnet mask can be obtained from the ipAdEntMask in the ipAddrTable. This parameter will take effect only after a agent restart or agent reset. This parameter will always be updated in the EEPROM.rw IpAddress .1.3.6.1.4.1.35616.5.1.18 |
lt2sIp4GatewayThe agent's administrative default gateway IP address. The current operational IP default gateway IP address can be obtained from the ipRouteDest in the ipRouteTable. This parameter will take effect only after a agent restart or agent reset. This parameter will always be updated in the EEPROM.rw IpAddress .1.3.6.1.4.1.35616.5.1.19 |
lt2sIp4PrimaryDnsFirst DNS server address.rw IpAddress .1.3.6.1.4.1.35616.5.1.20 |
lt2sIp4SecondaryDnsSecond DNS server address.rw IpAddress .1.3.6.1.4.1.35616.5.1.21 |
lt2sSnmpServerrw Enumeration .1.3.6.1.4.1.35616.5.1.22 |
lt2sHttpServerrw Enumeration .1.3.6.1.4.1.35616.5.1.23 |
lt2sTelnetServerrw Enumeration .1.3.6.1.4.1.35616.5.1.24 |
lt2sFtpServerrw Enumeration .1.3.6.1.4.1.35616.5.1.25 |
lt2sMgmtPortTableA list of management port entries. SEQUENCE OF Lt2sMgmtPortEntry .1.3.6.1.4.1.35616.5.1.26 |
lt2sMgmtPortEntryAn entry containing information applicable to the management ports. Lt2sMgmtPortEntry .1.3.6.1.4.1.35616.5.1.26.1 |
lt2sMgmtPortIdThe management port identification. 1 Inband SFP, 2 LAN1, 3 LAN2.ro Integer32 .1.3.6.1.4.1.35616.5.1.26.1.1 |
lt2sMgmtPortNameThe name of the management portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35616.5.1.26.1.2 |
lt2sMgmtPortEnableThe enabled state of the port.rw Enumeration .1.3.6.1.4.1.35616.5.1.26.1.3 |
lt2sMgmtPortLinkThe link state of the management port.ro Enumeration .1.3.6.1.4.1.35616.5.1.26.1.4 |
lt2sMgmtPortSpeedThe speed mode of the port.ro Enumeration .1.3.6.1.4.1.35616.5.1.26.1.5 |
lt2sMgmtPortTxBytesThe total amount of sent bytes.ro Integer32 .1.3.6.1.4.1.35616.5.1.26.1.6 |
lt2sMgmtPortRxBytesThe total amount of received bytes.ro Integer32 .1.3.6.1.4.1.35616.5.1.26.1.7 |
lt2sMgmtSfpPluggedThe line SFP plugged state of the port.ro Enumeration .1.3.6.1.4.1.35616.5.1.26.1.8 |
lt2sMgmtSfpVendorThe vendor name of the SFP.ro DisplayString .1.3.6.1.4.1.35616.5.1.26.1.9 |
lt2sMgmtSfpTypeThe vendor part name of the SFP.ro DisplayString .1.3.6.1.4.1.35616.5.1.26.1.10 |
lt2sMgmtSfpSerialThe serial number of the SFP.ro DisplayString .1.3.6.1.4.1.35616.5.1.26.1.11 |
lt2sMgmtSfpWavelengthThe SFP wavelength of the port. If the SFP is removed the object contains 'NA'.ro DisplayString .1.3.6.1.4.1.35616.5.1.26.1.12 |
lt2sMgmtSfpTxPowerThe SFP transmit power of the port. If the SFP is removed, the value is -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 dBm" .1.3.6.1.4.1.35616.5.1.26.1.13 |
lt2sMgmtSfpRxPowerThe SFP receive power of the port. If the SFP is removed, the value is -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 dBm" .1.3.6.1.4.1.35616.5.1.26.1.14 |
lt2sMgmtSfpLaserTempThe internal temperature of the SFP. If the SFP is removed, the value is -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.01 degrees Celsius" .1.3.6.1.4.1.35616.5.1.26.1.15 |
lt2sMgmtSfpLaserBiasThe SFP laser bias in milli ampere. If the SFP is removed, the value is -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 Ampere" .1.3.6.1.4.1.35616.5.1.26.1.16 |
lt2sMgmtSfpTxLowThe SFP laser TX low threshold in dBm.rw Integer32 (-10..2) UNITS "dBm" .1.3.6.1.4.1.35616.5.1.26.1.17 |
lt2sMgmtSfpTxHighThe SFP laser TX high threshold in dBm.rw Integer32 (-4..8) UNITS "dBm" .1.3.6.1.4.1.35616.5.1.26.1.18 |
lt2sMgmtSfpRxLowThe SFP laser RX low threshold in dBm.rw Integer32 (-30..0) UNITS "dBm" .1.3.6.1.4.1.35616.5.1.26.1.19 |
lt2sMgmtSfpRxHighThe SFP laser RX high threshold in dBm.rw Integer32 (-12..6) UNITS "dBm" .1.3.6.1.4.1.35616.5.1.26.1.20 |
lt2sSystem OBJECT IDENTIFIER .1.3.6.1.4.1.35616.5.2 |
lt2sTemperatureShows the ambient temperature.ro Integer32 ( 0..80 ) .1.3.6.1.4.1.35616.5.2.1 |
lt2sPowerTypeThe device's power supply 1 type.ro Enumeration .1.3.6.1.4.1.35616.5.2.2 |
lt2sPowerStatusThe device's power supply 1 status.ro Enumeration .1.3.6.1.4.1.35616.5.2.3 |
lt2sPowerFanStatusThe device's power supply 1's fan status.ro Enumeration .1.3.6.1.4.1.35616.5.2.4 |
lt2sPowerFanRPMThe device's power supply 1's fan rounds per minute.ro Integer32 .1.3.6.1.4.1.35616.5.2.5 |
lt2sPowerFanModeThe device's power supply 1's fan mode.rw Enumeration .1.3.6.1.4.1.35616.5.2.6 |
lt2sPowerFanOnTempThe device's power supply 1's fan on temperature.rw Integer32 .1.3.6.1.4.1.35616.5.2.7 |
lt2sPowerFanOffTempThe device's power supply 1's fan off temperature.rw Integer32 .1.3.6.1.4.1.35616.5.2.8 |
lt2sPorts OBJECT IDENTIFIER .1.3.6.1.4.1.35616.5.3 |
lt2sPortTableA list of port table entries. SEQUENCE OF Lt2sPortEntry .1.3.6.1.4.1.35616.5.3.1 |
lt2sPortEntryAn entry containing information applicable to a particular port. Lt2sPortEntry .1.3.6.1.4.1.35616.5.3.1.1 |
lt2sPortIdA unique value for each port.ro Integer32 (1) .1.3.6.1.4.1.35616.5.3.1.1.1 |
lt2sPortEnableThe status of the port.rw Enumeration .1.3.6.1.4.1.35616.5.3.1.1.2 |
lt2sPortApsdThe automatic power shut down configuration of the port.rw Enumeration .1.3.6.1.4.1.35616.5.3.1.1.3 |
lt2sPortSpeedThe speed mode of the port.rw Enumeration .1.3.6.1.4.1.35616.5.3.1.1.4 |
lt2sPortResetReset the port.rw Enumeration .1.3.6.1.4.1.35616.5.3.1.1.5 |
lt2sPortLoopSet Loop on chosen port.rw Enumeration .1.3.6.1.4.1.35616.5.3.1.1.6 |
lt2sPortNameThe name of the port.rw DisplayString .1.3.6.1.4.1.35616.5.3.1.1.7 |
lt2sLinePluggedThe line SFP plugged state of the port.ro Enumeration .1.3.6.1.4.1.35616.5.3.1.1.8 |
lt2sLineLinkThe line SFP link state of the port.ro Enumeration .1.3.6.1.4.1.35616.5.3.1.1.9 |
lt2sLineApsdThe automatic power shut down state of the line port.ro Enumeration .1.3.6.1.4.1.35616.5.3.1.1.10 |
lt2sLineTypeThe line SFP type of the port.ro DisplayString .1.3.6.1.4.1.35616.5.3.1.1.11 |
lt2sLineWavelengthThe line SFP wavelength of the port. If the line SFP is not plugged in, the object should contain the value of 'NA'.ro DisplayString .1.3.6.1.4.1.35616.5.3.1.1.12 |
lt2sLineTxPowerThe line SFP transmit power of the port. If the line SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 dBm" .1.3.6.1.4.1.35616.5.3.1.1.13 |
lt2sLineRxPowerThe line SFP receive power of the port. If the line SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 dBm" .1.3.6.1.4.1.35616.5.3.1.1.14 |
lt2sLineLaserTempThe line SFP laser temperature of the port. If the line SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "degrees Centigrade" .1.3.6.1.4.1.35616.5.3.1.1.15 |
lt2sLineLaserBiasThe line SFP laser bias of the port. If the line SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 Amp" .1.3.6.1.4.1.35616.5.3.1.1.16 |
lt2sLineTxLowThe line SFP laser TX low threshold of the port.rw Integer32 (-10..2) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.17 |
lt2sLineTxHighThe line SFP laser TX high threshold of the port.rw Integer32 (-4..8) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.18 |
lt2sLineRxLowThe line SFP laser RX low threshold of the port.rw Integer32 (-30..0) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.19 |
lt2sLineRxHighThe line SFP laser RX high threshold of the port.rw Integer32 (-12..6) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.20 |
lt2sClientPluggedThe client SFP plugged state of the port.ro Enumeration .1.3.6.1.4.1.35616.5.3.1.1.21 |
lt2sClientLinkThe client SFP link state of the port.ro Enumeration .1.3.6.1.4.1.35616.5.3.1.1.22 |
lt2sClientApsdThe automatic power shut down state of the client port.ro Enumeration .1.3.6.1.4.1.35616.5.3.1.1.23 |
lt2sClientTypeThe client SFP type of the port.ro DisplayString .1.3.6.1.4.1.35616.5.3.1.1.24 |
lt2sClientWavelengthThe client SFP wavelength of the port. If the client SFP is not plugged in, the object should contain the value of 'NA'.ro DisplayString .1.3.6.1.4.1.35616.5.3.1.1.25 |
lt2sClientTxPowerThe client SFP transmit power of the port. If the client SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 dBm" .1.3.6.1.4.1.35616.5.3.1.1.26 |
lt2sClientRxPowerThe client SFP receive power of the port. If the client SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 dBm" .1.3.6.1.4.1.35616.5.3.1.1.27 |
lt2sClientLaserTempThe client SFP laser temperature of the port. If the client SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "degrees Centigrade" .1.3.6.1.4.1.35616.5.3.1.1.28 |
lt2sClientLaserBiasThe client SFP laser bias of the port. If the client SFP is not plugged in, the object should contain the value of -1.ro Integer32 (-1 | 0..2147483647) UNITS "0.001 Amp" .1.3.6.1.4.1.35616.5.3.1.1.29 |
lt2sClientTxLowThe client SFP laser TX low threshold of the port.rw Integer32 (-10..2) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.30 |
lt2sClientTxHighThe client SFP laser TX high threshold of the port.rw Integer32 (-4..8) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.31 |
lt2sClientRxLowThe client SFP laser RX low threshold of the port.rw Integer32 (-30..0) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.32 |
lt2sClientRxHighThe client SFP laser RX high threshold of the port.rw Integer32 (-12..6) UNITS "dBm" .1.3.6.1.4.1.35616.5.3.1.1.33 |
lt2sInfo OBJECT IDENTIFIER .1.3.6.1.4.1.35616.5.4 |
lt2sTrapDetailsThe trap description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.35616.5.4.1 |
lt2sCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.35616.5.8 |
lt2sComplianceDescribes the requirements for conformance to the Lambdatrail2 MIB part. Unknown .1.3.6.1.4.1.35616.5.8.1 |
lt2sGroups OBJECT IDENTIFIER .1.3.6.1.4.1.35616.5.9 |
lt2sAgentGroupGrouping all LT2-S Agent parameters. Unknown .1.3.6.1.4.1.35616.5.9.1 |
lt2sSystemGroupGrouping all LT2-S system parameters. Unknown .1.3.6.1.4.1.35616.5.9.2 |
lt2sPortsGroupGrouping all LT2-S port parameters. Unknown .1.3.6.1.4.1.35616.5.9.3 |
lt2sInfoGroupGrouping all LT2-S info parameters. Unknown .1.3.6.1.4.1.35616.5.9.4 |
lt2sNotificationGroupAll the Traps the Lambdatrail2-S supports. Unknown .1.3.6.1.4.1.35616.5.9.5 |