LOG-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
49
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
microMuse OBJECT IDENTIFIER .1.3.6.1.4.1.1279 |
IMPORTS Unknown .1.3.6.1.4.1.1279 |
genMessage OBJECT IDENTIFIER .1.3.6.1.4.1.1279.1 |
agentFailureThe agent has failed. TRAP-TYPE .1.3.6.1.4.1.1279.1.0.1 |
summaryUsed to return a summary message when a trap is sent.ro OCTET STRING .1.3.6.1.4.1.1279.1.2 |
targetUsed to return the target system when a trap is sent.ro OCTET STRING .1.3.6.1.4.1.1279.1.3 |
errorCodeUsed to return an error code when a trap is sent.ro INTEGER .1.3.6.1.4.1.1279.1.4 |
logMessageUsed to return the target system when a trap is sent.ro OCTET STRING .1.3.6.1.4.1.1279.1.5 |
v1Agent OBJECT IDENTIFIER .1.3.6.1.4.1.1279.3 |
logMon OBJECT IDENTIFIER .1.3.6.1.4.1.1279.3.2 |
logExpressionFoundThe log agent found the desired string in the log file. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.1 |
logNotRespondingThe data is not available because the remote system is not
responding. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.2 |
logRespondingThe data is now available because the remote system is
responding again. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.3 |
logFileNotFoundThe log file canot be found. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.4 |
logMaxSizeExceededThe maximum size of the log file has been exceeded. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.5 |
logPermissionsChangedThe permissions on the log file have changed. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.6 |
logTruncatedThe log file has been truncated. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.7 |
logInvalidExpressionThe regular expression is invalid. TRAP-TYPE .1.3.6.1.4.1.1279.3.2.0.8 |
logGlobalSampleRateGlobal sample rate (in seconds). This value will be used if the
table entry sample rate is zero. Default value is 60.rw INTEGER .1.3.6.1.4.1.1279.3.2.1 |
logGlobalTrapRateGlobal trapping rate. Zero indicates edge-level trapping. 1 indicates
trapping continuously. Any other value means that a trap will be generated
every nth sampling while the condition persists.rw INTEGER .1.3.6.1.4.1.1279.3.2.2 |
logVersionThe version number of the agent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1279.3.2.3 |
logNotificationMethodThe desired method of notification. If trapping is not selected then global and
local trap rates have no significance. The modular selection causes traps to be
sent reliably to a primary or secondary modular probe. The default method is trap.rw Enumeration .1.3.6.1.4.1.1279.3.2.4 |
logOsTypeThe type of operating system.ro Enumeration .1.3.6.1.4.1.1279.3.2.5 |
logGlobalStatusThe overall status of the agent. Valid indicates the
agent is operating properly and the data in the MIB is
valid. Invalid indicates a major problem with the agent
that has prohibited further processing without corrective
action by an administrator. Futher details concerning
the reason for thefailure can be found in the event log (NT)
or error log (UNIX).ro Enumeration .1.3.6.1.4.1.1279.3.2.6 |
logFileTableLog file table SEQUENCE OF LogFileTableEntry .1.3.6.1.4.1.1279.3.2.7 |
logFileTableSizeSize of the table. The default value is 1.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.1 |
logFileTableEntryLog file entry. LogFileTableEntry .1.3.6.1.4.1.1279.3.2.7.2 |
logFileIndexThe index for this table.ro INTEGER .1.3.6.1.4.1.1279.3.2.7.2.1 |
logFileTypeThe type or command word of the entry:
active - Trapping is enabled.
inactive - No trapping. The default is inactive.
deleted - The entry has been deleted.
monitor - Do not trap based upon file size.rw Enumeration .1.3.6.1.4.1.1279.3.2.7.2.2 |
logFileStatusCurrent status of the entry:
valid - the value is under the threshold
invalid - the value exceeds the threshold
notresponding - cannot communicate
doesnotexist - file does not exist
readonly - file is read-only.ro Enumeration .1.3.6.1.4.1.1279.3.2.7.2.3 |
logFileLocalSampleRateLocal sample rate for this table entry. The default
is 0 which will cause the global sample rate to be used.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.4 |
logFileLocalTrapRateLocal trapping rate for this table entry. Zero indicates edge-level
trapping. 1 indicates continuous trapping. Any other value indicates
a trap will be generated every nth sampling while the condition persists.
The default is -1 which will cause the global trap rate to be used.rw INTEGER (-1..86400) .1.3.6.1.4.1.1279.3.2.7.2.5 |
logFilePathnameThe path of the file to be monitored.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1279.3.2.7.2.6 |
logFileSizeThe current size of the log file (in bytes). This value can be preset to
start monitoring at a location besides the beginning. This value is reset to
zero whenever the file is truncated. The default value is -1 which will start
logging at the end of the file.rw INTEGER (-1..2147483647) .1.3.6.1.4.1.1279.3.2.7.2.7 |
logFileThresholdThe maximum size of the log file (in bytes). The default is zero which
will not generate a trap.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.8 |
logFilePermissionsThe current permissions of the log file.ro INTEGER .1.3.6.1.4.1.1279.3.2.7.2.9 |
logFileExpressionTableSizeThe size of the expression subtable.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.10 |
logFileStartTimeHrThe hour to start monitoring. The default value is 0.
If logFileStartTimeHr = logFileStartTimeMin = logFileStopTimeHr =
logFileStopTimeMin = 0, then monitoring is continuous.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.11 |
logFileStartTimeMinThe minute to start monitoring. The default value is 0.
If logFileStartTimeHr = logFileStartTimeMin = logFileStopTimeHr =
logFileStopTimeMin = 0, then monitoring is continuous.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.12 |
logFileStopTimeHrThe hour to stop monitoring. The default value is 0.
If logFileStartTimeHr = logFileStartTimeMin = logFileStopTimeHr =
logFileStopTimeMin = 0, then monitoring is continuous.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.13 |
logFileStopTimeMinThe minute to stop monitoring. The default value is 0.
If logFileStartTimeHr = logFileStartTimeMin = logFileStopTimeHr =
logFileStopTimeMin = 0, then monitoring is continuous.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.14 |
logFileOffDaysBit string which specifies the day(s) of the week
to not monitor.
FORMAT: 0MTWRFSS
EXAMPLE:00000011 = decimal 3, which excludes Saturday and
Sunday.rw INTEGER .1.3.6.1.4.1.1279.3.2.7.2.15 |
logExpressTableLog expression table SEQUENCE OF LogExpressTableEntry .1.3.6.1.4.1.1279.3.2.8 |
logExpressTableEntryLog file entry. LogExpressTableEntry .1.3.6.1.4.1.1279.3.2.8.1 |
logExpressParentThe file table index of the parent.ro INTEGER .1.3.6.1.4.1.1279.3.2.8.1.1 |
logExpressIndexThe local index for this table.ro INTEGER .1.3.6.1.4.1.1279.3.2.8.1.2 |
logExpressTypeThe type or command word of the entry:
active - The entry is active.
inactive - The entry is not active. The default is inactive.
deleted - The entry has been deleted.rw Enumeration .1.3.6.1.4.1.1279.3.2.8.1.3 |
logExpressRegexThe regular expression to be monitored.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1279.3.2.8.1.4 |
logExpressMessageOptional message to be sent when a trap is sent. The logFilePathname field,
the logExpressString field , and the log file match line may be encoded in the message
by putting '$PATHNAME', or '$EXPRESSION' '$LOGFILELINE' in the message
respectively. The default message is the standard message that is
generated by the log agent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1279.3.2.8.1.5 |