LCOS-SX-GENERAL-MIB
AI MIB Summary
The LCOS-SX-GENERAL-MIB provides the management information base definitions for monitoring and controlling the operational state, system resources, and interface parameters of Brocade (now Broadcom) LCOS (Layer 2/3/4 Operating System) switches. It enables the collection of standard SNMP metrics such as system uptime, CPU utilization, memory usage, port statistics, and error counters for network troubleshooting and capacity planning.
Management information base definitions
Main OID:
lcosSXGeneral.1.3.6.1.4.1.2356.100
66
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
66 total| Object Name |
|---|
lcosSXGeneralManagement information base definitions MODULE-IDENTITY .1.3.6.1.4.1.2356.100 |
lcsNotificationGrp OBJECT IDENTIFIER .1.3.6.1.4.1.2356.100.0 |
lcsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2356.100.0.1 |
lcsTrapsTemperatureStateChangeTrap is sent when the system temperature crosses a threshold. To avoid rapid flapping between states, a hysteresis may be applied. NOTIFICATION-TYPE .1.3.6.1.4.1.2356.100.0.1.100 |
lcsTrapsFanStateChangeTrap is sent when fan state change happens. NOTIFICATION-TYPE .1.3.6.1.4.1.2356.100.0.1.101 |
lcsTrapsPSUStateChangeTrap is sent when Power Supply state change happens. NOTIFICATION-TYPE .1.3.6.1.4.1.2356.100.0.1.102 |
lcsNotificationVars OBJECT IDENTIFIER .1.3.6.1.4.1.2356.100.0.2 |
lcsNotificationStateChangeEventThis event describes state change events of a fan or power supply. insertion - hot-pluggable fan or power supply was inserted removal - hot-pluggable fan or power supply was removed becomeoperational - fan or power supply became operational after failure state failure - fan or power supply failure happened losepower - a power supply was operational, but the power to it has been disconnected or has failedro Enumeration .1.3.6.1.4.1.2356.100.0.2.100 |
lcsNotificationTemperatureStatusCurrentThe current status of the temperature sensor.ro MonitoringTempSensorStatus .1.3.6.1.4.1.2356.100.0.2.101 |
lcsNotificationTemperatureStatusPreviousThe previous status of the temperatur sensor, i.e. before this events triggered.ro MonitoringTempSensorStatus .1.3.6.1.4.1.2356.100.0.2.102 |
lcsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.2356.100.1 |
lcsMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.2356.100.1.1 |
lcsMonitoringTempSensorsTableTable of temperature sensors on the device. SEQUENCE OF LcsMonitoringTempSensorsTableEntry .1.3.6.1.4.1.2356.100.1.1.1 |
lcsMonitoringTempSensorsTableEntryTemperature sensor entry. LcsMonitoringTempSensorsTableEntry .1.3.6.1.4.1.2356.100.1.1.1.1 |
lcsMonitoringTempSensorUnitIndexDevice stacking unit index where the sensor is on, 1 if device is not capable of stacking.ro Unsigned32 .1.3.6.1.4.1.2356.100.1.1.1.1.1 |
lcsMonitoringTempSensorIndexIndex of the temperature sensor on the device, repeating for multiple stacking units.ro Unsigned32 .1.3.6.1.4.1.2356.100.1.1.1.1.2 |
lcsMonitoringTempSensorDescriptionDescription of the temperature sensor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.1.1.1.1.3 |
lcsMonitoringTempSensorTypeType of the temperature sensor. Usually fixed(1).ro MonitoringSensorType .1.3.6.1.4.1.2356.100.1.1.1.1.4 |
lcsMonitoringTempSensorStateState of the temperature sensor.ro MonitoringTempSensorStatus .1.3.6.1.4.1.2356.100.1.1.1.1.5 |
lcsMonitoringTempSensorTemperatureTemperature measured by the temperature sensor.ro Integer32 .1.3.6.1.4.1.2356.100.1.1.1.1.6 |
lcsMonitoringTempUnitTableTable of temperature state per unit. SEQUENCE OF LcsMonitoringTempUnitEntry .1.3.6.1.4.1.2356.100.1.1.2 |
lcsMonitoringTempUnitEntryUnit temperatur state entry. LcsMonitoringTempUnitEntry .1.3.6.1.4.1.2356.100.1.1.2.1 |
lcsMonitoringTempUnitIndexUnit index of the unit, 1 if device is not capable of stacking.ro Unsigned32 .1.3.6.1.4.1.2356.100.1.1.2.1.1 |
lcsMonitoringTempUnitStateThe temperature state of the unit.ro MonitoringTempSensorStatus .1.3.6.1.4.1.2356.100.1.1.2.1.2 |
lcsMonitoringTempUnitTemperatureThe highest temperature currently reported by any sensor on the unit.ro Integer32 .1.3.6.1.4.1.2356.100.1.1.2.1.3 |
lcsMonitoringFansTableTable of fans on the device. SEQUENCE OF LcsMonitoringFansTableEntry .1.3.6.1.4.1.2356.100.1.1.3 |
lcsMonitoringFansTableEntryFan entry. LcsMonitoringFansTableEntry .1.3.6.1.4.1.2356.100.1.1.3.1 |
lcsMonitoringFanUnitIndexDevice stacking unit index where the fan is on, 1 if device is not capable of stacking.ro Unsigned32 .1.3.6.1.4.1.2356.100.1.1.3.1.1 |
lcsMonitoringFanIndexIndex of the fan on the device, repeating for multiple stacking units.ro Unsigned32 .1.3.6.1.4.1.2356.100.1.1.3.1.2 |
lcsMonitoringFanDescriptionDescription of the fan.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.1.1.3.1.3 |
lcsMonitoringFanTypeType of the fan. Usually fixed(1) oder removable(2).ro MonitoringSensorType .1.3.6.1.4.1.2356.100.1.1.3.1.4 |
lcsMonitoringFanStateState of the fan.ro MonitoringModuleStatus .1.3.6.1.4.1.2356.100.1.1.3.1.5 |
lcsMonitoringFanSpeedSpeed of the fan in RPM.ro Gauge32 .1.3.6.1.4.1.2356.100.1.1.3.1.6 |
lcsMonitoringPSUTableTable of power supply units on the device. SEQUENCE OF LcsMonitoringPSUTableEntry .1.3.6.1.4.1.2356.100.1.1.4 |
lcsMonitoringPSUTableEntryPower supply unit entry. LcsMonitoringPSUTableEntry .1.3.6.1.4.1.2356.100.1.1.4.1 |
lcsMonitoringPSUUnitIndexDevice stacking unit index where the PSU is on, 1 if device is not capable of stacking.ro Unsigned32 .1.3.6.1.4.1.2356.100.1.1.4.1.1 |
lcsMonitoringPSUIndexIndex of the PSU on the device, repeating for multiple stacking units.ro Unsigned32 .1.3.6.1.4.1.2356.100.1.1.4.1.2 |
lcsMonitoringPSUDescriptionDescription of the PSU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.1.1.4.1.3 |
lcsMonitoringPSUTypeType of the PSU.ro MonitoringSensorType .1.3.6.1.4.1.2356.100.1.1.4.1.4 |
lcsMonitoringPSUStateState of the PSU.ro MonitoringModuleStatus .1.3.6.1.4.1.2356.100.1.1.4.1.5 |
lcsConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.2356.100.2 |
lcsLMC OBJECT IDENTIFIER .1.3.6.1.4.1.2356.100.2.1500 |
lcsLMCOperatingLMC Operating Switch 0:Disable 1:Enable 2:Tryrw Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.1 |
lcsLMCConfigViaDHCPEnables LMC configuration via DHCP option 43 0:Disable 1:Enablerw Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.2 |
lcsLMCDomainLMC Domain for example cloud.lancom.derw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.2.1500.3 |
lcsLMCAutoRenewRenew DHCP lease early when connection to LMC is not possible 0:Disabled 1:Enabledrw Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.4 |
lcsLMCRolloutProjectIDLMC Project rollout information stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.2.1500.5 |
lcsLMCRolloutLocationIDLMC Location rollout information stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.2.1500.6 |
lcsLMCRolloutRoleLMC Role rollout information stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.2.1500.7 |
lcsLMCZeroTouchSupportSupport for Zero Touch 0:No 1:Yesro Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.50 |
lcsLMCPairingTokenPresentParing Token present 0:No 1:Yesro Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.51 |
lcsLMCManagementStatusManagement statusro LMCStatus .1.3.6.1.4.1.2356.100.2.1500.53 |
lcsLMCControlStatusControl statusro LMCStatus .1.3.6.1.4.1.2356.100.2.1500.54 |
lcsLMCMonitoringStatusMonitoring statusro LMCStatus .1.3.6.1.4.1.2356.100.2.1500.55 |
lcsLMCConfigModifiedConfiguration modified by LMC 0:No 1:Yesro Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.57 |
lcsLMCDeviceIDDevice IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.2.1500.58 |
lcsLMCStackingStatus0:NotSupported 1:StackingDisabled 2:StackingConfigured 3:StackingActive 4:StackingUnitConfigurationActivero Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.59 |
lcsLMCStatusRTTHeartbeat round trip timero Unsigned32 .1.3.6.1.4.1.2356.100.2.1500.100 |
lcsLMCTransportStatusTableTransport status SEQUENCE OF LcsLMCTransportStatusTableEntry .1.3.6.1.4.1.2356.100.2.1500.101 |
lcsLMCTransportStatusTableEntryTransport number LcsLMCTransportStatusTableEntry .1.3.6.1.4.1.2356.100.2.1500.101.1 |
lcsLMCTransportStatusTransportNumberIndexTransport status index Integer32 .1.3.6.1.4.1.2356.100.2.1500.101.1.1 |
lcsLMCTransportStatusServiceNameService namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2356.100.2.1500.101.1.2 |
lcsLMCTransportStatusHttpRequestsNumber of Http requestsro Counter64 .1.3.6.1.4.1.2356.100.2.1500.101.1.3 |
lcsLMCTransportStatusHttpRequestsErrorsNumber of Http request errorsro Counter64 .1.3.6.1.4.1.2356.100.2.1500.101.1.4 |
lcsLMCTransportStatusTXBytesNumber of transmitted bytesro Counter64 .1.3.6.1.4.1.2356.100.2.1500.101.1.5 |
lcsLMCTransportStatusRXBytesNumber of received bytesro Counter64 .1.3.6.1.4.1.2356.100.2.1500.101.1.7 |