InterSeptor-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for InterSeptor-MIB.
176
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
176 total| Object Name |
|---|
jacarta OBJECT IDENTIFIER .1.3.6.1.4.1.19011 |
RFC1155-SMI Unknown .1.3.6.1.4.1.19011 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1 |
webAppliance OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3 |
inSept OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1 |
inSeptObjects OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1 |
inSeptIdent OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.1 |
inSeptIdentManufacturerThe name of the interSeptor manufacturer.ro DisplayString .1.3.6.1.4.1.19011.1.3.1.1.1.1 |
inSeptIdentModelThe interSeptor Model designation.ro DisplayString .1.3.6.1.4.1.19011.1.3.1.1.1.2 |
inSeptIdentAgentSoftwareVersionThe interSeptor software/firmware version.ro DisplayString .1.3.6.1.4.1.19011.1.3.1.1.1.3 |
inSeptIdentNameA string identifying the interSeptor. This object should be
set by the administrator.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.1.4 |
inSeptConfig OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2 |
inSeptConfigMibVersionThe version of MIB spec.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.1 |
inSeptConfigNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.2 |
inSeptConfigIpAddressThe ip address that NMS can identify the managed
devicerw IpAddress .1.3.6.1.4.1.19011.1.3.1.1.2.2.1 |
inSeptConfigGatewayThe default gateway that allows the device to be managed
through routersrw IpAddress .1.3.6.1.4.1.19011.1.3.1.1.2.2.2 |
inSeptConfigSubnetMaskInternet address subnet maskrw IpAddress .1.3.6.1.4.1.19011.1.3.1.1.2.2.3 |
inSeptConfigDateTime OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.3 |
inSeptConfigDateThe date in inSept, format is (dd/mm/yyyy)rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.2.3.1 |
inSeptConfigTimeThe time in interSeptor, format is (hh:mm:ss)rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.2.3.2 |
inSeptConfigTimeFromNtpEnable/disable update date/time from NTP server.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.3.3 |
inSeptConfigNtpIpAddressNTP IP address.rw IpAddress .1.3.6.1.4.1.19011.1.3.1.1.2.3.4 |
inSeptConfigNtpTimeZoneEnable/disable update date/time from NTP server.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.3.5 |
inSeptConfigDayLightSavingEnable/disable daylight saving for NTP time, if enabled, the time get from NTP will be set
set one hour in advance to reflect daylight saving status.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.3.6 |
inSeptConfigLog OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.4 |
inSeptConfigHistoryLogFrequencyThe frequency of the update of the history log. The value
is in secondsrw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.4.1 |
inSeptConfigExtHistoryLogFrequencyThe frequency of the update of the extended history log.
The value is in secondsrw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.4.2 |
inSeptConfigConfigurationLogEnable/disable inSept to log parameter change.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.4.3 |
inSeptConfigDhcpStatueEnable or disable DHCP/BootP capabilityrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.5 |
inSeptConfigPingStatueEnable or disable Ping Echo capabilityrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.6 |
inSeptConfigTftpStatueEnable or disable TFTP network upgrade capabilityrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.7 |
inSeptConfigTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.8 |
inSeptConfigTelnetStatueEnable or disable telnet accessrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.8.1 |
inSeptConfigTelnetPortNumberSetting the server port of telnet.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.8.2 |
inSeptConfigHttp OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.9 |
inSeptConfigHttpStatueEnable or disable HTTP accessrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.9.1 |
inSeptConfigHttpPortNumberSetting the server port of HTTP.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.9.2 |
inSeptConfigHttpSecurityEnable/disable HTTP access for read-only usersrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.9.3 |
inSeptConfigSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.10 |
inSeptConfigSnmpStatueEnable or disable SNMP accessrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.10.1 |
inSeptConfigSnmpPortNumberSetting the server port of SNMP.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.10.2 |
inSeptConfigControl OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.11 |
inSeptConfigResetToDefaultReset all parameters of interSeptor to default valuerw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.11.1 |
inSeptConfigRestartRestart interSeptorrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.11.2 |
inSeptConfigTrap OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.2.12 |
inSeptConfigTrapRetryCountThe count of repeat traps to send to NMS before trap
acknowledgement is received.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.12.1 |
inSeptConfigTrapRetryTimeThe time between retrying to send traps to NMS.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.12.2 |
inSeptConfigTrapAckSignatureThe signature of trap acknowledgement.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.12.3 |
inSeptConfigPollRateThe frequency that interSeptor updates readings from sensors
(unit : second).rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.13 |
inSeptConfigTrapsReceiversTableA list of managers to send traps to. The number of
entries is given by the value of inSeptConfigNumTrapReceivers SEQUENCE OF InSeptConfigTrapsReceiversEntry .1.3.6.1.4.1.19011.1.3.1.1.2.14 |
inSeptConfigTrapsReceiversEntryThe managers to send traps to. InSeptConfigTrapsReceiversEntry .1.3.6.1.4.1.19011.1.3.1.1.2.14.1 |
inSepttrapsIndexThe index to a trap receiver entry.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.14.1.1 |
inSepttrapsReceiverAddrThe IP address of the manager to send a trap to.rw IpAddress .1.3.6.1.4.1.19011.1.3.1.1.2.14.1.2 |
inSeptreceiverCommunityStringThe community name to use in the trap when
sent to the manager.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.2.14.1.3 |
inSeptreceiverSeverityLevelThe severity level of traps to be received by this manager.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.14.1.4 |
inSeptreceiverDescriptionDescription of trap receiversrw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.2.14.1.5 |
inSeptConfigAccessControlTableA list of managers which can access interSeptor with private
community string. SEQUENCE OF InSeptConfigAccessControlEntry .1.3.6.1.4.1.19011.1.3.1.1.2.15 |
inSeptConfigAccessControlEntryThe managers. InSeptConfigAccessControlEntry .1.3.6.1.4.1.19011.1.3.1.1.2.15.1 |
accessIndexThe index to a access control entry.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.2.15.1.1 |
accessControlAddrThe IP address of the manager to access interSeptorrw IpAddress .1.3.6.1.4.1.19011.1.3.1.1.2.15.1.2 |
accessCommunityStringThe community name to use in the manager when
access interSeptorrw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.2.15.1.3 |
accessControlModeAccess type, only read/Write access type can change parameter
of interSeptorrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.15.1.4 |
inSeptConfigTemperatureUnitThe temperature unit of the system, can be Celsius or Farenheitrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.16 |
inSeptConfigDateFormatThe date format of the system, can be dd/mm/yyyy or mm/dd/yyyyrw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.2.17 |
inSeptsensorMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.3 |
inSeptsensorMonitorSensorNumberThe number of sensors that can be monitored.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.3.1 |
inSeptsensorMonitorSensorTableA list of sensor devices to be monitored. SEQUENCE OF SensorMonitorSensorEntry .1.3.6.1.4.1.19011.1.3.1.1.3.2 |
inSeptsensorMonitorSensorEntryThe sensor device. SensorMonitorSensorEntry .1.3.6.1.4.1.19011.1.3.1.1.3.2.1 |
inSeptsensorMonitorDeviceIndexThe index to a sensor device entry.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.1 |
inSeptsensorMonitorDeviceStatusThe device type connected to interSeptor.ro Enumeration .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.2 |
inSeptsensorMonitorDeviceTemperatureThe temperature of sensor on device interSeptor, the unit is 0.1 degree.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.3 |
inSeptsensorMonitorDeviceTemperatureAlarmThe alarm type of sensor on device interSeptor.ro Enumeration .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.4 |
inSeptsensorMonitorDeviceHumidityThe humidity of sensor on device interSeptor, the unit is 0.1%.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.5 |
inSeptsensorMonitorDeviceHumidityAlarmThe alarm type of sensor on device interSeptor.ro Enumeration .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.6 |
inSeptsensorMonitorAlarm1The device status of sensor 1 connected to interSeptor.ro Enumeration .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.7 |
inSeptsensorMonitorAlarm2The device status of sensor 2 connected to interSeptor.ro Enumeration .1.3.6.1.4.1.19011.1.3.1.1.3.2.1.8 |
inSeptsensorConfig OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4 |
inSeptsensorConfigSensorNumberThe number of sensors that are connected to interSeptor.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.1 |
inSeptsensorConfigSensorTableA list of sensor devices to be configured. SEQUENCE OF InSeptsensorConfigSensorEntry .1.3.6.1.4.1.19011.1.3.1.1.4.2 |
inSeptsensorConfigSensorEntryThe sensor device. InSeptsensorConfigSensorEntry .1.3.6.1.4.1.19011.1.3.1.1.4.2.1 |
inSeptsensorConfigDeviceIndexThe index to a sensor device entry.ro INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.2.1.1 |
inSeptsensorConfigDeviceNameThe name of the sensor device for identification.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.2.1.2 |
inSeptsensorConfigDeviceStateThe setup of sensor device type.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.2.1.3 |
inSeptsensorConfigSensor1 OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.3 |
inSeptsensorConfigSensor1DeviceNameThe name of sensor device.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.3.1 |
inSeptsensorConfigSensor1DeviceStateThe setup of sensor device type.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.2 |
inSeptsensorConfigSensor1Temperature OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.3.3 |
inSeptsensorConfigSensor1TemperatureNameThe temperature sensor name.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.1 |
inSeptsensorConfigSensor1TemperatureLowWarningThe set point to trigger low warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.2 |
inSeptsensorConfigSensor1TemperatureLowCriticalThe threshold to trigger low critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.3 |
inSeptsensorConfigSensor1TemperatureHighWarningThe threshold to trigger high warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.4 |
inSeptsensorConfigSensor1TemperatureHighCriticalThe threshold to trigger high critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.5 |
inSeptsensorConfigSensor1TemperatureHysteresisThe set value to prevent too many alarms when temperature is hovering around the
set threshold.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.6 |
inSeptsensorConfigSensor1TemperatureCalibrationThe set value to get the correct temperature according to your reference temperature.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.7 |
inSeptsensorConfigSensor1TemperatureLowWarningStatusEnable/disable the set point to trigger low warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.8 |
inSeptsensorConfigSensor1TemperatureLowCriticalStatusEnable/disable the set point to trigger low critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.9 |
inSeptsensorConfigSensor1TemperatureHighWarningStatusEnable/disable the set point to trigger high warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.10 |
inSeptsensorConfigSensor1TemperatureHighCriticalStatusEnable/disable the set point to trigger high critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.3.11 |
inSeptsensorConfigSensor1Humidity OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.3.4 |
inSeptsensorConfigSensor1HumdityNameThe humidity sensor name.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.1 |
inSeptsensorConfigSensor1HumidityLowWarningThe set point to trigger low warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.2 |
inSeptsensorConfigSensor1HumidityLowCriticalThe threshole to trigger low critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.3 |
inSeptsensorConfigSensor1HumidityHighWarningThe threshold to trigger high warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.4 |
inSeptsensorConfigSensor1HumidityHighCriticalThe threshold to trigger high critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.5 |
inSeptsensorConfigSensor1HumidityHysteresisThe set value to prevent too many alarms when Humidity is hovering around the
set threshold.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.6 |
inSeptsensorConfigSensor1HumidityCalibrationThe set value to get the correct temperature according to your reference temperature.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.7 |
inSeptsensorConfigSensor1HumidityLowWarningStatusEnable/disable the set point to trigger low warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.8 |
inSeptsensorConfigSensor1HumidityLowCriticalStatusEnable/disable the set point to trigger low critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.9 |
inSeptsensorConfigSensor1HumidityHighWarningStatusEnable/disable the set point to trigger high warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.10 |
inSeptsensorConfigSensor1HumidityHighCriticalStatusEnable/disable the set point to trigger high critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.4.11 |
inSeptsensorConfigSensor1Alarm1 OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.3.5 |
inSeptsensorConfigSensor1Alarm1NameThe name of alarm-1.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.3.5.1 |
inSeptsensorConfigSensor1Alarm1StateSetup the signal type to trigger alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.5.2 |
inSeptsensorConfigSensor1Alarm1HysteresisThe set value to delay the alarm triggered when event occurs.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.5.3 |
inSeptsensorConfigSensor1Alarm2 OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.3.6 |
inSeptsensorConfigSensor1Alarm2NameThe name of alarm-1.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.3.6.1 |
inSeptsensorConfigSensor1Alarm2StateSetup the signal type to trigger alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2 |
inSeptsensorConfigSensor1Alarm2HysteresisThe set value to delay the alarm triggered when event occurs.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.3.6.3 |
inSeptsensorConfigSensor2 OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.4 |
inSeptsensorConfigSensor2DeviceNameThe name of sensor device.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.4.1 |
inSeptsensorConfigSensor2DeviceStateThe setup of sensor device type.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.2 |
inSeptsensorConfigSensor2Temperature OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.4.3 |
inSeptsensorConfigSensor2TemperatureNameThe temperature sensor name.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.1 |
inSeptsensorConfigSensor2TemperatureLowWarningThe set point to trigger low warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.2 |
inSeptsensorConfigSensor2TemperatureLowCriticalThe threshold to trigger low critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.3 |
inSeptsensorConfigSensor2TemperatureHighWarningThe threshold to trigger high warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.4 |
inSeptsensorConfigSensor2TemperatureHighCriticalThe threshold to trigger high critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.5 |
inSeptsensorConfigSensor2TemperatureHysteresisThe set value to prevent too many alarms when temperature is hovering around the
set threshold.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.6 |
inSeptsensorConfigSensor2TemperatureCalibrationThe set value to get the correct temperature according to your reference temperature.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.7 |
inSeptsensorConfigSensor2TemperatureLowWarningStatusEnable/disable the set point to trigger low warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.8 |
inSeptsensorConfigSensor2TemperatureLowCriticalStatusEnable/disable the set point to trigger low critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.9 |
inSeptsensorConfigSensor2TemperatureHighWarningStatusEnable/disable the set point to trigger high warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.10 |
inSeptsensorConfigSensor2TemperatureHighCriticalStatusEnable/disable the set point to trigger high critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.3.11 |
inSeptsensorConfigSensor2Humidity OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.4.4 |
inSeptsensorConfigSensor2HumdityNameThe humidity sensor name.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.1 |
inSeptsensorConfigSensor2HumidityLowWarningThe set point to trigger low warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.2 |
inSeptsensorConfigSensor2HumidityLowCriticalThe threshold to trigger low critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.3 |
inSeptsensorConfigSensor2HumidityHighWarningThe threshold to trigger high warning alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.4 |
inSeptsensorConfigSensor2HumidityHighCriticalThe threshold to trigger high critical alarm.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.5 |
inSeptsensorConfigSensor2HumidityHysteresisThe set value to prevent too many alarms when Humidity is hovering around the
set threshold.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.6 |
inSeptsensorConfigSensor2HumidityCalibrationThe set value to get the correct temperature according to your reference temperature.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.7 |
inSeptsensorConfigSensor2HumidityLowWarningStatusEnable/disable the set point to trigger low warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.8 |
inSeptsensorConfigSensor2HumidityLowCriticalStatusEnable/disable the set point to trigger low critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.9 |
inSeptsensorConfigSensor2HumidityHighWarningStatusEnable/disable the set point to trigger high warning alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.10 |
inSeptsensorConfigSensor2HumidityHighCriticalStatusEnable/disable the set point to trigger high critical alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.4.11 |
inSeptsensorConfigSensor2Alarm1 OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.4.5 |
inSeptsensorConfigSensor2Alarm1NameThe name of alarm-1.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.4.5.1 |
inSeptsensorConfigSensor2Alarm1StateSetup the signal type to trigger alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.5.2 |
inSeptsensorConfigSensor2Alarm1HysteresisThe set value to delay the alarm triggered when event occurs.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.5.3 |
inSeptsensorConfigSensor2Alarm2 OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.1.4.4.6 |
inSeptsensorConfigSensor2Alarm2NameThe name of alarm-1.rw DisplayString .1.3.6.1.4.1.19011.1.3.1.1.4.4.6.1 |
inSeptsensorConfigSensor2Alarm2StateSetup the signal type to trigger alarm.rw Enumeration .1.3.6.1.4.1.19011.1.3.1.1.4.4.6.2 |
inSeptsensorConfigSensor2Alarm2HysteresisThe set value to delay the alarm triggered when event occurs.rw INTEGER .1.3.6.1.4.1.19011.1.3.1.1.4.4.6.3 |
inSeptTraps OBJECT IDENTIFIER .1.3.6.1.4.1.19011.1.3.1.2 |
inSeptCommunicationRestoredINFORMATION: Communication between interSeptor and sensor has been
established. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.1 |
inSeptCommunicationLostWARNING: Communication between interSeptor and sensor has been
lost. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.2 |
inSeptAlarm1InactiveINFORMATION: Alarm1 of sensor has returned from active state. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.3 |
inSeptAlarm1ActiveWARNING: Alarm1 has become active. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.4 |
inSeptAlarm2InactiveINFORMATION: Alarm2 of sensor has returned from active state. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.5 |
inSeptAlarm2ActiveWARNING: Alarm2 has become active. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.6 |
inSeptTemperatureNotHighWarningINFORMATION: The temperature of sensor has returned from High warning to normal. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.7 |
inSeptTemperatureHighWarningWARNING: The temperature of sensor is higher than High warning set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.8 |
inSeptTemperatureNotLowWarningINFORMATION: The temperature of sensor has returned from low warning to normal. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.9 |
inSeptTemperatureLowWarningWARNING: The temperature of sensor is lower than low warning set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.10 |
inSeptTemperatureNotHighCriticalINFORMATION: The temperature of sensor is lower than high critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.11 |
inSeptTemperatureHighCriticalCRITICAL: The temperature of sensor is higher than high critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.12 |
inSeptTemperatureNotLowCriticalINFORMATION: The temperature of sensor is higher than low critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.13 |
inSeptTemperatureLowCriticalCRITICAL: The temperature of sensor is lower than low critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.14 |
inSeptHumidityNotHighWarningINFORMATION: The humidity of sensor has returned from High warning to normal. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.15 |
inSeptHumidityHighWarningWARNING: The humidity of sensor is higher than High warning set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.16 |
inSeptHumidityNotLowWarningINFORMATION: The humidity of sensor has returned from low warning to normal. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.17 |
inSeptHumidityLowWarningWARNING: The humidity of sensor is lower than low warning set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.18 |
inSeptHumidityNotHighCriticalINFORMATION: The humidity of sensor is lower than high critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.19 |
inSeptHumidityHighCriticalCRITICAL: The humidity of sensor is higher than high critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.20 |
inSeptHumidityNotLowCriticalINFORMATION: The humidity of sensor is higher than low critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.21 |
inSeptHumidityLowCriticalCRITICAL: The humidity of sensor is lower than low critical set point. TRAP-TYPE .1.3.6.1.4.1.19011.1.3.1.2.0.22 |