IPFWACC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IPFWACC-MIB.
28
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
ipFwAccTableA table with the accounting rules of the IP firewall Unknown .1.3.6.1.4.1.2021.13.1 |
ipFwAccEntryAn accounting rule of the IP firewall IpFwAccTable .1.3.6.1.4.1.2021.13.1.1 |
ipFwAccIndexReference index for each firewall rule.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.1 |
ipFwAccSrcAddrThe source address in the firewall rule.ro IpAddress .1.3.6.1.4.1.2021.13.1.1.2 |
ipFwAccSrcNetMaskThe netmask of the source address in the firewall rule.ro IpAddress .1.3.6.1.4.1.2021.13.1.1.3 |
ipFwAccDstAddrThe destination address in the firewall rule.ro IpAddress .1.3.6.1.4.1.2021.13.1.1.4 |
ipFwAccDstNetMaskThe netmask of the destination address in the firewall rule.ro IpAddress .1.3.6.1.4.1.2021.13.1.1.5 |
ipFwAccViaNameThe name of the interface to which the rule applies. If no interface is associated with the present rule, this should contain a dash (-) .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2021.13.1.1.6 |
ipFwAccViaAddrThe address of the interface to which the rule applies. Using this parameter makes sense when multiple addresses are associated to the same physical interface. If not defined for the current rule this should be set to 0.ro IpAddress .1.3.6.1.4.1.2021.13.1.1.7 |
ipFwAccProtoThe protocol(s) to which the rule applies.ro Enumeration .1.3.6.1.4.1.2021.13.1.1.8 |
ipFwAccBidirWhether the rule works in both directions (i.e. with the source and destination parts swapped) or not.ro Enumeration .1.3.6.1.4.1.2021.13.1.1.9 |
ipFwAccDirWhether the rule applies to packets entering or exiting the kernel.ro Enumeration .1.3.6.1.4.1.2021.13.1.1.10 |
ipFwAccBytesThe number of bytes that matched this rule since the last reset of the counters.ro Counter .1.3.6.1.4.1.2021.13.1.1.11 |
ipFwAccPacketsThe number of packets that matched this rule since the last reset of the counters.ro Counter .1.3.6.1.4.1.2021.13.1.1.12 |
ipFwAccNrSrcPortsThe number of ports that refer to the source address.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.13 |
ipFwAccNrDstPortsThe number of ports that refer to the destination address.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.14 |
ipFwAccSrcIsRangeInterpret the first two ports of the source part as the upper and lower limit of an interval or not.ro Enumeration .1.3.6.1.4.1.2021.13.1.1.15 |
ipFwAccDstIsRangeInterpret the first two ports of the destination part as the upper and lower limit of an interval or not.ro Enumeration .1.3.6.1.4.1.2021.13.1.1.16 |
ipFwAccPort1Port number 1.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.17 |
ipFwAccPort2Port number 2.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.18 |
ipFwAccPort3Port number 3.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.19 |
ipFwAccPort4Port number 4.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.20 |
ipFwAccPort5Port number 5.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.21 |
ipFwAccPort6Port number 6.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.22 |
ipFwAccPort7Port number 7.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.23 |
ipFwAccPort8Port number 8.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.24 |
ipFwAccPort9Port number 9.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.25 |
ipFwAccPort10Port number 10.ro INTEGER .1.3.6.1.4.1.2021.13.1.1.26 |