INFORMANT-ADV
AI MIB Summary
The INFORMANT-ADV MIB module enables SNMP monitoring of performance counters and system metrics for Informant Advanced, a legacy network management software suite typically deployed on Cisco routers and switches. It facilitates the collection of granular operational data, including interface statistics, protocol states, and resource utilization, for capacity planning and fault analysis within legacy Cisco environments.
The MIB module for SNMP Informant Advanced performance counter entries.
Main OID:
advanced.1.3.6.1.4.1.9600.1.2
2395
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
2395 total| Object Name |
|---|
advancedThe MIB module for SNMP Informant Advanced performance counter entries. MODULE-IDENTITY .1.3.6.1.4.1.9600.1.2 |
acsPerRsvpServiceTableThe ACS/RSVP Service performance object counters report statistics about Resource Reservation Protocol (RSVP) and Quality of Service (QoS) Admission Control (ACS) activity, flow, bandwidth, RSVP messages sent, and so on. The ACS/RSVP Service object is available if QoS Admission Control is installed, even if the service is not running. SEQUENCE OF ACSPerRSVPServiceEntry .1.3.6.1.4.1.9600.1.2.1 |
acsPerRsvpServiceEntryPerformance information for one particular instance of 'ACS/RSVP Service' object. ACSPerRSVPServiceEntry .1.3.6.1.4.1.9600.1.2.1.1 |
acsPerRsvpSvcInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.1.1.1 |
acsPerRsvpSvcBytesInQoSNotifyA running total of the number of bytes delivered in QoS Notifications to QoS-enabled applications.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.2 |
acsPerRsvpSvcFailedQoSRequestsThe number of QoS requests generated by QoS-enabled applications that have been rejected by the ACS/RSVP service. Failed QoS requests can be caused by invalid QoS requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.3 |
acsPerRsvpSvcFailedQoSSendsThe number of QoS notifications the ACS/RSVP service that could not be sent to the QoS applications. Failed QoS sends can be caused by terminated applications.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.4 |
acsPerRsvpSvcNetworkInterfacesThe number of local network interfaces visible to, and used by the RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.5 |
acsPerRsvpSvcNetworkSocketsThe total number of raw sockets opened for the purpose of RSVP signaling.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.6 |
acsPerRsvpSvcQoSNotificationsThe number of QoS notifications delivered to QoS-enabled applications by the QoS RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.7 |
acsPerRsvpSvcQoSSocketsThe number of sockets that are currently QoS enabled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.8 |
acsPerRsvpSvcQoSEnabledReceiversIndicates the number of RESV messages sent for QoS-enabled receivers. This number increments each time a RESV is refreshed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.9 |
acsPerRsvpSvcQoSEnabledSendersIndicates the number of PATH messages sent for QoS-enabled senders. This number increments each time a PATH is refreshed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.10 |
acsPerRsvpSvcRSVPSessionsThe current number of active RSVP sessions on the ACS/RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.11 |
acsPerRsvpSvcTimersThe number of timer events scheduled to take place. Shows the activity level of the ACS/RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.1.1.12 |
activeServerPagesThe Active Server Pages performance object monitors errors, requests, sessions, or other data generated from Active Server Pages (ASP) applications. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.2 |
aspDebuggingRequestsNumber of debugging document requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.1 |
aspEngineFlushNotificationsThe number of engines invalidated in the cache due to change notification.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.2 |
aspErrorsDuringScriptRuntimeNumber of requests failed due to runtime errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.3 |
aspErrorsFromASPPreprocessorNumber of requests failed due to preprocessor errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.4 |
aspErrorsFromScriptCompilersNumber of requests failed due to script compilation errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.5 |
aspErrorsPerSecThe number of errors per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.6 |
aspInMemoryTemplateCacheHitRatePercent of requests found in cached in memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.7 |
aspInMemoryTemplatesCachedThe number of compiled templates cached in memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.8 |
aspRequestBytesInTotalThe total size, in bytes, of all requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.9 |
aspRequestBytesOutTotalThe total size, in bytes, of responses sent to clients. This does not include standard HTTP response headers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.10 |
aspRequestExecutionTimeThe number of milliseconds that it took to execute the most recent request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.11 |
aspRequestWaitTimeThe number of milliseconds the most recent request was waiting in the queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.12 |
aspRequestsDisconnectedThe number of requests that were disconnected due to communication failure.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.13 |
aspRequestsExecutingThe number of requests currently executing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.14 |
aspRequestsFailedTotalThe total number of requests failed due to errors, authorization failure, and rejections.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.15 |
aspRequestsNotAuthorizedNumber of requests failed due to insufficient access rights.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.16 |
aspRequestsNotFoundThe number of requests for files that were no found.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.17 |
aspRequestsQueuedThe number of requests waiting for service from the queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.18 |
aspRequestsRejectedThe total number of requests not executed because there were insufficient resources to process them.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.19 |
aspRequestsSucceededThe number of requests that executed successfully.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.20 |
aspRequestsTimedOutThe number of requests that timed out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.21 |
aspRequestsTotalThe total number of requests since the service was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.22 |
aspRequestsPerSecThe number of requests executed per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.23 |
aspScriptEngineCacheHitRatePercent of requests found in script engine cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.24 |
aspScriptEnginesCachedThe number of script engines in cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.25 |
aspSessionDurationThe number of milliseconds that the most recent session persisted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.26 |
aspSessionsCurrentThe current number of sessions being serviced.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.27 |
aspSessionsTimedOutThe number of sessions timed out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.28 |
aspSessionsTotalThe total number of sessions since the service was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.29 |
aspTemplateCacheHitRatePercent of requests found in template cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.30 |
aspTemplateNotificationsThe number of templates invalidated in the cache due to change notification.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.31 |
aspTemplatesCachedThe number of templates currently cached.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.32 |
aspTransactionsAbortedThe number of transactions aborted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.33 |
aspTransactionsCommittedThe number of transactions committed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.34 |
aspTransactionsPendingNumber of transactions in progress.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.35 |
aspTransactionsTotalThe total number of transactions since the service was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.36 |
aspTransactionsPerSecTransactions started per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.2.37 |
appleTalkTableThe AppleTalk performance object consists of counters that monitor traffic on the AppleTalk network. SEQUENCE OF AppleTalkEntry .1.3.6.1.4.1.9600.1.2.3 |
appleTalkEntryPerformance information for one particular instance of 'AppleTalk' object. AppleTalkEntry .1.3.6.1.4.1.9600.1.2.3.1 |
atInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.3.1.1 |
atAARPPacketsPerSecNumber of AARP packets per second received by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.2 |
atATPALOResponsePerSecNumber of ATP At-least-once transaction responses per second on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.3 |
atATPPacketsPerSecNumber of ATP packets per second received by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.4 |
atATPRecvdReleasePerSecNumber of ATP transaction release packets per second received on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.5 |
atATPResponseTimoutsNumber of ATP release timers that have expired on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.6 |
atATPRetriesLocalNumber of ATP requests retransmitted on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.7 |
atATPRetriesRemoteNumber of ATP requests retransmitted to this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.8 |
atATPXOResponsePerSecNumber of ATP Exactly-once transaction responses per second on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.9 |
atAverageTimePerAARPPacketAverage time in milliseconds to process an AARP packet on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.10 |
atAverageTimePerATPPacketAverage time in milliseconds to process an ATP packet on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.11 |
atAverageTimePerDDPPacketAverage time in milliseconds to process a DDP packet on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.12 |
atAverageTimePerNBPPacketAverage time in milliseconds to process an NBP packet on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.13 |
atAverageTimePerRTMPPacketAverage time in milliseconds to process an RTMP packet on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.14 |
atAverageTimePerZIPPacketAverage time in milliseconds to process a ZIP packet on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.15 |
atBytesInPerSecNumber of bytes received per second by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.16 |
atBytesOutPerSecNumber of bytes sent per second by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.17 |
atCurrentNonPagedPoolThe current amount of nonpaged memory resources used by AppleTalk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.18 |
atDDPPacketsPerSecNumber of DDP packets per second received by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.19 |
atNBPPacketsPerSecNumber of NBP packets per second received by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.20 |
atPacketsInPerSecNumber of packets received per second by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.21 |
atPacketsOutPerSecNumber of packets sent per second by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.22 |
atPacketsRoutedInPerSecNumber of packets routed in on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.23 |
atPacketsRoutedOutPerSecNumber of packets routed out on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.24 |
atPacketsDroppedNumber of packets dropped due to resource limitations on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.25 |
atRTMPPacketsPerSecNumber of RTMP packets per second received by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.26 |
atZIPPacketsPerSecNumber of ZIP packets per second received by Appletalk on this port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.3.1.27 |
aspDotNETASP.NET supports the following ASP.NET system performance counters. These aggregate information for all ASP.NET applications on a Web server computer, or they apply generally to a system of ASP.NET servers running the same applications. These can include Web farms and Web gardens. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.4 |
adnApplicationRestartsNumber of times the application has been restarted during the web server's lifetime.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.1 |
adnApplicationsRunningNumber of currently running web applications.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.2 |
adnRequestExecutionTimeThe number of milliseconds that it took to execute the most recent request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.3 |
adnRequestWaitTimeThe number of milliseconds the most recent request was waiting in the queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.4 |
adnRequestsCurrentThe current number of requests, including those that are queued, currently executing, or waiting to be written to the client. Under the ASP.NET process model, when this counter exceeds the requestQueueLimit defined in the processModel configuration section, ASP.NET will begin rejecting requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.5 |
adnRequestsDisconnectedThe number of requests disconnected due to communication errors or user terminated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.6 |
adnRequestsQueuedThe number of requests waiting to be processed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.7 |
adnRequestsRejectedThe number of requests rejected because the request queue was full.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.8 |
adnStateServerSessionsAbandonedThe number of sessions that have been explicitly abandoned.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.9 |
adnStateServerSessionsActiveThe current number of sessions currently active.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.10 |
adnStateServerSessionsTimedOutThe number of sessions timed out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.11 |
adnStateServerSessionsTotalThe number of sessions total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.12 |
adnWorkerProcessRestartsNumber of times a worker process has restarted on the machine.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.13 |
adnWorkerProcessesRunningNumber of worker processes running on the machine.ro Gauge32 .1.3.6.1.4.1.9600.1.2.4.14 |
aspDotNETApplicationsTableASP.NET supports the following application performance counters, which you can use to monitor the performance of a single instance of an ASP.NET application. A unique instance appears for these counters, named __Total__, which aggregates counters for all applications on a Web server (similar to the global counters described in the first section of this topic). The __Total__ instance is always available. The counters will display zero when no applications are present on the server. SEQUENCE OF ASPNETApplicationsEntry .1.3.6.1.4.1.9600.1.2.5 |
aspDotNETApplicationsEntryPerformance information for one particular instance of 'ASP.NET Applications' object. ASPNETApplicationsEntry .1.3.6.1.4.1.9600.1.2.5.1 |
adnApplInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.5.1.1 |
adnApplAnonymousRequestsNumber of requests utilizing anonymous authentication.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.2 |
adnApplAnonymousRequestsPerSecNumber of Authentication Anonymous Requests/Secro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.3 |
adnApplCacheAPIEntriesTotal number of entries within the cache added by the user.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.4 |
adnApplCacheAPIHitRatioRatio of hits called from user code.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.5 |
adnApplCacheAPIHitsNumber of cache hits from user code.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.6 |
adnApplCacheAPIMissesNumber of cache misses called from user code.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.7 |
adnApplCacheAPITurnoverRateNumber of additions and removals to the API cache per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.8 |
adnApplCacheTotalEntriesTotal number of entries within the cache (both internal and user added)ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.9 |
adnApplCacheTotalHitRatioRatio of hits from all cache calls.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.10 |
adnApplCacheTotalHitsTotal number of hits from the cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.11 |
adnApplCacheTotalMissesTotal number of cache misses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.12 |
adnApplCacheTotalTurnoverRateNumber of additions and removals to the total cache per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.13 |
adnApplCompilationsTotalNumber of .asax, .ascx, .ashx, .asmx, or .aspx source files dynamically compiled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.14 |
adnApplDebuggingRequestsNumber of debugging requests processed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.15 |
adnApplErrorsCompilationNumber of errors that have occurred during compilation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.16 |
adnApplErrorsExecutionNumber of errors that have occurred during the processing of a request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.17 |
adnApplErrorsPreprocessingNumber of errors that have occurred during parsing and configuration.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.18 |
adnApplErrorsTotalTotal number of errors occurred.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.19 |
adnApplErrorsTotalPerSecRate of errors occurred.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.20 |
adnApplErrorsUnhandledExecNumber of errors not handled by user code, but by the default error handler.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.21 |
adnApplErrorsUnhandledExecPerSecRate of unhandled errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.22 |
adnApplOutputCacheEntriesCurrent number of entries in the output cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.23 |
adnApplOutputCacheHitRatioRatio of hits to requests for output cacheable requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.24 |
adnApplOutputCacheHitsTotal number of ouput cacheable requests served from the output cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.25 |
adnApplOutputCacheMissesTotal number of ouput cacheable requests not served from the output cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.26 |
adnApplOutputCacheTurnoverRateNumber of additions and removals to the output cache per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.27 |
adnApplPipelineInstanceCountNumber of active pipeline instances.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.28 |
adnApplRequestBytesInTotalThe total size, in bytes, of all requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.29 |
adnApplRequestBytesOutTotalThe total size, in bytes, of responses sent to a client. This does not include standard HTTP response headers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.30 |
adnApplRequestsExecutingThe number of requests currently executing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.31 |
adnApplRequestsFailedTotal number of failed requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.32 |
adnApplRequestsInApplQueueThe number of requests in the application request queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.33 |
adnApplRequestsNotAuthorizedNumber of requests failed due to unauthorized access.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.34 |
adnApplRequestsNotFoundThe number of requests for resources that were not found.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.35 |
adnApplRequestsSucceededThe number of requests that executed successfully.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.36 |
adnApplRequestsTimedOutThe number of requests that timed out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.37 |
adnApplRequestsTotalThe total number of requests since the application was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.38 |
adnApplRequestsPerSecThe number of requests executed per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.39 |
adnApplSessionSQLSrvrConnTotalThe total number of connections to the SQL Server used by session state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.40 |
adnApplSessionStateSrvrConnTotalThe total number of connections to the State Server used by session state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.41 |
adnApplSessionsAbandonedThe number of sessions that have been explicitly abandoned.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.42 |
adnApplSessionsActiveThe current number of sessions currently active.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.43 |
adnApplSessionsTimedOutThe number of sessions timed out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.44 |
adnApplSessionsTotalTotal number of sessions since the application was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.45 |
adnApplTransactionsAbortedThe number of transactions aborted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.46 |
adnApplTransactionsCommittedThe number of transactions committed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.47 |
adnApplTransactionsPendingNumber of transactions in progress.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.48 |
adnApplTransactionsTotalThe total number of transactions since the application was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.49 |
adnApplTransactionsPerSecTransactions started per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.5.1.50 |
browserThe Browser performance object consists of counters that measure the rates of announcements, enumerations, and other browser transmissions. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.6 |
browserAnnouncementsDomainPerSecAnnouncements Domain/sec is the rate at which a Domain has announced itself to the network.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.1 |
browserAnnouncementsServerPerSecAnnouncements Server/sec is the rate at which the servers in this domain have announced themselves to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.2 |
browserAnnouncementsTotalPerSecAnnouncements Total/sec is the sum of Announcements Server/sec and Announcements Domain/sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.3 |
browserDuplicateMasterAnnounceDuplicate Master Announcements indicates the number of times that the master browser has detected another master browser on the same domain.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.4 |
browserElectionPacketsPerSecElection Packets/sec is the rate of Browser election packets that have been received by this workstation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.5 |
browserEnumerationsDomainPerSecEnumerations Domain/sec is the rate of Domain browse requests that have been processed by this workstation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.6 |
browserEnumerationsOtherPerSecEnumerations Other/sec is the rate of browse requests processed by this workstation that were not domain or server browse requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.7 |
browserEnumerationsServerPerSecEnumerations Server/sec is the rate of Server browse requests that have been processed by this workstation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.8 |
browserEnumerationsTotalPerSecEnumerations Total/sec is the rate of browse requests that have been processed by this workstation. This is the sum of Enumerations Server, Enumerations Domain, and Enumerations Other.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.9 |
browserIllegalDatagramsPerSecIllegal Datagrams/sec is the rate of incorrectly formatted datagrams that have been received by the workstation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.10 |
browserMailslotAllocationsFailedMailslot Allocations Failed is the number of times the datagram receiver has failed to allocate a buffer to hold a user mailslot write.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.11 |
browserMailslotOpensFailedPerSecMailslot Opens Failed/sec indicates the rate of mailslot messages received by this workstation that were to be delivered to mailslots that are not present on this workstation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.12 |
browserMailslotReceivesFailedMailslot Receives Failed indicates the number of mailslot messages that couldn't be received due to transport failures.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.13 |
browserMailslotWritesFailedMailslot Writes Failed is the total number of mailslot messages that have been successfully received, but that were unable to be written to the mailslot.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.14 |
browserMailslotWritesPerSecMailslot Writes/sec is the rate of mailslot messages that have been successfully received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.15 |
browserMissedMailslotDatagramsMissed Mailslot Datagrams is the number of Mailslot Datagrams that have been discarded due to configuration or allocation limits.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.16 |
browserMissedServerAnnouncementsMissed Server Announcements is the number of server announcements that have been missed due to configuration or allocation limits.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.17 |
browserMissedServerListRequestsMissed Server List Requests is the number of requests to retrieve a list of browser servers that were received by this workstation, but could not be processed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.18 |
browserServerAllocFailedPerSecServer Announce Allocations Failed/sec is the rate of server (or domain) announcements that have failed due to lack of memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.19 |
browserServerListRequestsPerSecServer List Requests/sec is the rate of requests to retrieve a list of browser servers that have been processed by this workstation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.6.20 |
cacheThe Cache performance object consists of counters that monitor the file system cache, an area of physical memory that stores recently used data as long as possible to permit access to the data without having to read from the disk. Because applications typically use the cache, the cache is monitored as an indicator of application input/output (I/O) operations. When memory is plentiful, the cache can grow, but when memory is scarce, the cache can become too small to be effective. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.7 |
cacheAsyncCopyReadsPerSecAsync Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer. The application will regain control immediately even if the disk must be accessed to retrieve the page.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.1 |
cacheAsyncDataMapsPerSecAsync Data Maps/sec is the frequency that an application using a file system, such as NTFS, to map a page of a file into the file system cache to read the page, and does not wait for the page to be retrieved if it is not in main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.2 |
cacheAsyncFastReadsPerSecAsync Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache. Normally, file I/O requests will invoke the appropriate file system to retrieve data from a file, but this path permits data to be retrieved from the cache directly (without file system involvement) if the data is in the cache. Even if the data is not in the cache, one invocation of the file system is avoided. If the data is not in the cache, the request (application program call) will not wait until the data has been retrieved from disk, but will get control immediately.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.3 |
cacheAsyncMDLReadsPerSecAsync MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the pages. The MDL contains the physical address of each page in the transfer, thus permitting Direct Memory Access (DMA) of the pages. If the accessed page(s) are not in main memory, the calling application program will not wait for the pages to fault in from disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.4 |
cacheAsyncPinReadsPerSecAsync Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk. Pages read in this fashion are pinned in memory at the completion of the read. The file system will regain control immediately even if the disk must be accessed to retrieve the page. While pinned, a page's physical address will not be altered.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.5 |
cacheCopyReadHitsPercentCopy Read Hits is the percentage of cache copy read requests that hit the cache, that is, they did not require a disk read in order to provide access to the page in the cache. A copy read is a file read operation that is satisfied by a memory copy from a page in the cache to the application's buffer. The LAN Redirector uses this method for retrieving information from the cache, as does the LAN Server for small transfers. This is a method used by the disk file systems as well.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.6 |
cacheCopyReadsPerSecCopy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer. The LAN Redirector uses this method for retrieving information from the file system cache, as does the LAN Server for small transfers. This is a method used by the disk file systems as well.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.7 |
cacheDataFlushPagesPerSecData Flush Pages/sec is the number of pages the file system cache has flushed to disk as a result of a request to flush or to satisfy a write-through file write request. More than one page can be transferred on each flush operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.8 |
cacheDataFlushesPerSecData Flushes/sec is the rate at which the file system cache has flushed its contents to disk as the result of a request to flush or to satisfy a write-through file write request. More than one page can be transferred on each flush operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.9 |
cacheDataMapHitsPercentData Map Hits is the percentage of data maps in the file system cache that could be resolved without having to retrieve a page from the disk, because the page was already in physical memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.10 |
cacheDataMapPinsPerSecData Map Pins/sec is the frequency of data maps in the file system cache that resulted in pinning a page in main memory, an action usually preparatory to writing to the file on disk. While pinned, a page's physical address in main memory and virtual address in the file system cache will not be altered.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.11 |
cacheDataMapsPerSecData Maps/sec is the frequency that a file system such as NTFS, maps a page of a file into the file system cache to read the page.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.12 |
cacheFastReadNotPossiblesPerSecFast Read Not Possibles/sec is the frequency of attempts by an Application Program Interface (API) function call to bypass the file system to get to data in the file system cache that could not be honored without invoking the file system.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.13 |
cacheFastReadResourceMissPerSecFast Read Resource Misses/sec is the frequency of cache misses necessitated by the lack of available resources to satisfy the request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.14 |
cacheFastReadsPerSecFast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache. Normally, file I/O requests invoke the appropriate file system to retrieve data from a file, but this path permits direct retrieval of data from the cache without file system involvement if the data is in the cache. Even if the data is not in the cache, one invocation of the file system is avoided.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.15 |
cacheLazyWriteFlushesPerSecLazy Write Flushes/sec is the rate at which the Lazy Writer thread has written to disk. Lazy Writing is the process of updating the disk after the page has been changed in memory, so that the application that changed the file does not have to wait for the disk write to be complete before proceeding. More than one page can be transferred by each write operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.16 |
cacheLazyWritePagesPerSecLazy Write Pages/sec is the rate at which the Lazy Writer thread has written to disk. Lazy Writing is the process of updating the disk after the page has been changed in memory, so that the application that changed the file does not have to wait for the disk write to be complete before proceeding. More than one page can be transferred on a single disk write operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.17 |
cacheMDLReadHitsPercentMDL Read Hits is the percentage of Memory Descriptor List (MDL) Read requests to the file system cache that hit the cache, i.e., did not require disk accesses in order to provide memory access to the page(s) in the cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.18 |
cacheMDLReadsPerSecMDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the data. The MDL contains the physical address of each page involved in the transfer, and thus can employ a hardware Direct Memory Access (DMA) device to effect the copy. The LAN Server uses this method for large transfers out of the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.19 |
cachePinReadHitsPercentPin Read Hits is the percentage of pin read requests that hit the file system cache, i.e., did not require a disk read in order to provide access to the page in the file system cache. While pinned, a page's physical address in the file system cache will not be altered. The LAN Redirector uses this method for retrieving data from the cache, as does the LAN Server for small transfers. This is usually the method used by the disk file systems as well.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.20 |
cachePinReadsPerSecPin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk. Pages read in this fashion are pinned in memory at the completion of the read. While pinned, a page's physical address in the file system cache will not be altered.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.21 |
cacheReadAheadsPerSecRead Aheads/sec is the frequency of reads from the file system cache in which the Cache detects sequential access to a file. The read aheads permit the data to be transferred in larger blocks than those being requested by the application, reducing the overhead per access.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.22 |
cacheSyncCopyReadsPerSecSync Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer. The file system will not regain control until the copy operation is complete, even if the disk must be accessed to retrieve the page.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.23 |
cacheSyncDataMapsPerSecSync Data Maps/sec counts the frequency that a file system, such as NTFS, maps a page of a file into the file system cache to read the page, and wishes to wait for the page to be retrieved if it is not in main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.24 |
cacheSyncFastReadsPerSecSync Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache. Normally, file I/O requests invoke the appropriate file system to retrieve data from a file, but this path permits direct retrieval of data from the cache without file system involvement if the data is in the cache. Even if the data is not in the cache, one invocation of the file system is avoided. If the data is not in the cache, the request (application program call) will wait until the data has been retrieved from disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.25 |
cacheSyncMDLReadsPerSecSync MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the pages. The MDL contains the physical address of each page in the transfer, thus permitting Direct Memory Access (DMA) of the pages. If the accessed page(s) are not in main memory, the caller will wait for the pages to fault in from the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.26 |
cacheSyncPinReadsPerSecSync Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk. Pages read in this fashion are pinned in memory at the completion of the read. The file system will not regain control until the page is pinned in the file system cache, in particular if the disk must be accessed to retrieve the page. While pinned, a page's physical address in the file system cache will not be altered.ro Gauge32 .1.3.6.1.4.1.9600.1.2.7.27 |
dhcpServerThe DHCP Server performance object provides counters for monitoring DHCP service activity. The DHCP service enables the server to perform as a DHCP server and configure DHCP-enabled client computers on your network as described in the DHCP standard. This object is available when the service is running. The following table describes the counters provided by the DHCP Server object and how to interpret the values when monitoring DHCP service performance. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.8 |
dhcpSrvAcksPerSecRate of DHCP Acks sent by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.1 |
dhcpSrvActiveQueueLengthThe Number of packets in the processing queue of the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.2 |
dhcpSrvConflictCheckQueueLengthThe Number of packets in the DHCP server queue waiting on conflict detection (ping).ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.3 |
dhcpSrvDeclinesPerSecRate of DHCP Declines received by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.4 |
dhcpSrvDiscoversPerSecRate of DHCP Discovers received by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.5 |
dhcpSrvDuplicatesDroppedPerSecDuplicates Dropped/sec is the rate at which the DHCP server received duplicate packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.6 |
dhcpSrvInformsPerSecRate of DHCP Informs received by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.7 |
dhcpSrvMillisecondsPerPacketAvgThe average time per packet taken by the DHCP server to send a response.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.8 |
dhcpSrvNacksPerSecRate of DHCP Nacks sent by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.9 |
dhcpSrvOffersPerSecRate of DHCP Offers sent out by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.10 |
dhcpSrvPacketsExpiredPerSecPackets Expired/sec is the rate at which packets get expired in the DHCP server message queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.11 |
dhcpSrvPacketsReceivedPerSecPackets Received/sec is the rate at which packets are received by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.12 |
dhcpSrvReleasesPerSecRate of DHCP Releases received by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.13 |
dhcpSrvRequestsPerSecRate of DHCP Requests received by the DHCP server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.8.14 |
distributedTransactionCoordinatorThe Distributed Transaction Coordinator performance object provides statistics about Distributed Transaction Coordinator (MS DTC), part of Component Services (formerly known as Transaction Server) that coordinates external, or two-phase transactions. Among other things, MS DTC is used to coordinate two-phase transactions by Message Queuing. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.9 |
dtcAbortedTransactionsNumber of aborted transactionsro Gauge32 .1.3.6.1.4.1.9600.1.2.9.1 |
dtcAbortedTransactionsPerSecTransactions aborted per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.9.2 |
dtcActiveTransactionsNumber of currently active transactionsro Gauge32 .1.3.6.1.4.1.9600.1.2.9.3 |
dtcActiveTransactionsMaximumMaximum number of transactions ever concurrently activero Gauge32 .1.3.6.1.4.1.9600.1.2.9.4 |
dtcCommittedTransactionsNumber of committed transactionsro Gauge32 .1.3.6.1.4.1.9600.1.2.9.5 |
dtcCommittedTransactionsPerSecTransactions committed per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.9.6 |
dtcForceAbortedTransactionsNumber of transactions aborted by the system administratorro Gauge32 .1.3.6.1.4.1.9600.1.2.9.7 |
dtcForceCommittedTransactionsNumber of transactions committed by the system administratorro Gauge32 .1.3.6.1.4.1.9600.1.2.9.8 |
dtcInDoubtTransactionsNumber of in doubt transactionsro Gauge32 .1.3.6.1.4.1.9600.1.2.9.9 |
dtcResponseTimeAverageAverage time delta between transaction begin and commitro Gauge32 .1.3.6.1.4.1.9600.1.2.9.10 |
dtcResponseTimeMaximumMaximum time delta between transaction begin and commitro Gauge32 .1.3.6.1.4.1.9600.1.2.9.11 |
dtcResponseTimeMinimumMinimum time delta between transaction begin and commitro Gauge32 .1.3.6.1.4.1.9600.1.2.9.12 |
dtcTransactionsPerSecTransactions performed per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.9.13 |
dnsThe DNS performance object provides counters for monitoring various areas of performance of the DNS service that enables client computers on your network to register and resolve DNS domain names. These names are used to find and access resources offered by other computers on your network or other networks, such as the Internet. The data reported by the DNS object includes the number of overall queries and responses processed by a DNS server, the number of DNS queries and responses processed using either the User Datagram Protocol (UDP) or the Transmission Control Protocol (TCP), the number of queries and responses that used recursion to look up and fully resolve DNS names on behalf of requesting clients, and the number of queries and responses made to servers using the WINS lookup integration features of the DNS service. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.10 |
dnsAXFRRequestReceivedAXFR Request Received is the total number of full zone transfer requests received by the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.1 |
dnsAXFRRequestSentAXFR Request Sent is the total number of full zone transfer requests sent by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.2 |
dnsAXFRResponseReceivedAXFR Response Received is the total number of full zone transfer responses received by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.3 |
dnsAXFRSuccessReceivedAXFR Success Received is the total number of successful full zone transfers received by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.4 |
dnsAXFRSuccessSentAXFR Success Sent is the total number of successful full zone transfers of the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.5 |
dnsCachingMemoryCaching Memory is the total caching memory used by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.6 |
dnsDatabaseNodeMemoryDatabase Node Memory is the total database node memory used by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.7 |
dnsDynamicUpdateNoOperationDynamic Update NoOperation is the total number of No-operation/Empty dynamic update requests received by the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.8 |
dnsDynamicUpdateNoOpPerSecDynamic Update NoOperation/sec is the average number of No-operation/Empty dynamic update requests received by the DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.9 |
dnsDynamicUpdateQueuedDynamic Update Queued is the total number of dynamic updates queued by the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.10 |
dnsDynamicUpdateReceivedDynamic Update Received is the total number of dynamic update requests received by the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.11 |
dnsDynamicUpdateReceivedPerSecDynamic Update Received/sec is the average number of dynamic update requests received by the DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.12 |
dnsDynamicUpdateRejectedDynamic Update Rejected is the total number of dynamic updates rejected by the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.13 |
dnsDynamicUpdateTimeOutsDynamic Update TimeOuts is the total number of dynamic update timeouts of the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.14 |
dnsDynamicUpdateWriteToDBDynamic Update Written to Database is the total number of dynamic updates written to the database by the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.15 |
dnsDynamicUpdateWriteToDBPerSecDynamic Update Written to Database/sec is the average number of dynamic updates written to the database by the DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.16 |
dnsIXFRRequestReceivedIXFR Request Received is the total number of incremental zone transfer requests received by the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.17 |
dnsIXFRRequestSentIXFR Request Sent is the total number of incremental zone transfer requests sent by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.18 |
dnsIXFRResponseReceivedIXFR Response Received is the total number of incrementalzone transfer responses received by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.19 |
dnsIXFRSuccessReceivedIXFR Success Received is the total number of successful incremental zone transfers received by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.20 |
dnsIXFRSuccessSentIXFR Success Sent is the total number of successful incremental zone transfers of the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.21 |
dnsIXFRTCPSuccessReceivedIXFR TCP Success Received is the total number of successful TCP incremental zone transfers received by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.22 |
dnsIXFRUDPSuccessReceivedIXFR UDP Success Received is the total number of successful UDP incremental zone transfers received by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.23 |
dnsNbstatMemoryNbstat Memory is the total Nbstat memory used by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.24 |
dnsNotifyReceivedNotify Received is the total number of notifies received by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.25 |
dnsNotifySentNotify Sent is the total number of notifies sent by the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.26 |
dnsRecordFlowMemoryRecord Flow Memory is the total record flow memory used by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.27 |
dnsRecursiveQueriesRecursive Queries is the total number of recursive queries received by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.28 |
dnsRecursiveQueriesPerSecRecursive Queries/sec is the average number of recursive queries received by DNS server in each sencond.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.29 |
dnsRecursiveQueryFailureRecursive Query Failure is the total number of recursive query failures.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.30 |
dnsRecursiveQueryFailurePerSecRecursive Query Failure/sec is the average number of recursive query failures in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.31 |
dnsRecursiveSendTimeOutsRecursive TimeOuts is the total number of recursive query sending timeouts.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.32 |
dnsRecursiveTimeOutPerSecRecursive TimeOut/sec is the average number of recursive query sending timeouts in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.33 |
dnsSecureUpdateFailureSecure Update Failure is the total number of secure updates failed of the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.34 |
dnsSecureUpdateReceivedSecure Update Received is the total number of secure update requests received by the DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.35 |
dnsSecureUpdateReceivedPerSecSecure Update Received/sec is the average number of secure update requests received by the DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.36 |
dnsTCPMessageMemoryTCP Message Memory is the total TCP message memory used by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.37 |
dnsTCPQueryReceivedTCP Query Received is the total number of TCP queries received by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.38 |
dnsTCPQueryReceivedPerSecTCP Query Received/sec is the average number of TCP queries received by DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.39 |
dnsTCPResponseSentTCP Response Sent is the total number of TCP reponses sent by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.40 |
dnsTCPResponseSentPerSecTCP Response Sent/sec is the average number of TCP reponses sent by DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.41 |
dnsTotalQueryReceivedTotal Query Received is the total number of queries received by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.42 |
dnsTotalQueryReceivedPerSecTotal Query Received/sec is the average number of queries received by DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.43 |
dnsTotalResponseSentTotal Response Sent is the total number of reponses sent by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.44 |
dnsTotalResponseSentPerSecTotal Response Sent/sec is the average number of reponses sent by DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.45 |
dnsUDPMessageMemoryUDP Message Memory is the total UDP message memory used by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.46 |
dnsUDPQueryReceivedUDP Query Received is the total number of UDP queries received by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.47 |
dnsUDPQueryReceivedPerSecUDP Query Received/sec is the average number of UDP queries received by DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.48 |
dnsUDPResponseSentUDP Response Sent is the total number of UDP reponses sent by DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.49 |
dnsUDPResponseSentPerSecUDP Response Sent/sec is the average number of UDP reponses sent by DNS server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.50 |
dnsWINSLookupReceivedWINS Lookup Received is the total number of WINS lookup requests received by the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.51 |
dnsWINSLookupReceivedPerSecWINS Lookup Received/sec is the average number of WINS lookup requests received by the server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.52 |
dnsWINSResponseSentWINS Response Sent is the total number of WINS lookup responses sent by the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.53 |
dnsWINSResponseSentPerSecWINS Response Sent/sec is the average number of WINS lookup responses sent by the server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.54 |
dnsWINSReverseLookupReceivedWINS Reverse Lookup Received is the total number of WINS reverse lookup requests received by the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.55 |
dnsWINSReverseLookupRcvPerSecWINS Reverse Lookup Received/sec is the average number of WINS reverse lookup requests received by the server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.56 |
dnsWINSReverseResponseSentWINS Reverse Response Sent is the total number of WINS Reverse lookup responses sent by the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.57 |
dnsWINSReverseResponseSentPerSecWINS Reverse Response Sent/sec is the average number of WINS Reverse lookup responses sent by the server in each second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.58 |
dnsZoneTransferFailureZone Transfer Failure is the total number of failed zone transfers of the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.59 |
dnsZoneTransferRequestReceivedZone Transfer Request Received is the total number of zone transfer requests received by the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.60 |
dnsZoneTransferSOARequestSentZone Transfer SOA Request Sent is the total number of zone transfer SOA requests sent by the secondary DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.61 |
dnsZoneTransferSuccessZone Transfer Success is the total number of successful zone transfers of the master DNS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.10.62 |
dotNETCLRDataTableThe Performance console .NET CLR Data category includes counters that provide information about the exceptions thrown by an application. SEQUENCE OF DotNETCLRDataEntry .1.3.6.1.4.1.9600.1.2.11 |
dotNETCLRDataEntryPerformance information for one particular instance of '.NET CLR Data' object. DotNETCLRDataEntry .1.3.6.1.4.1.9600.1.2.11.1 |
ncdInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.11.1.1 |
ncdSQLClntCurNumConnPoolsCurrent number of pools associated with the process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.11.1.2 |
ncdSQLClntCurNumConnsCurrent number of connections, pooled or not.ro Gauge32 .1.3.6.1.4.1.9600.1.2.11.1.3 |
ncdSQLClntCurNumPoolConnsCurrent number of connections in all pools associated with the process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.11.1.4 |
ncdSQLClntPeakNumPoolConnsThe highest number of connections in all pools since the process started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.11.1.5 |
ncdSQLClntTotalNumFailedCommandsThe total number of command executes that have failed for any reason.ro Gauge32 .1.3.6.1.4.1.9600.1.2.11.1.6 |
ncdSQLClntTotalNumFailedConnectsThe total number of connection open attempts that have failed for any reason.ro Gauge32 .1.3.6.1.4.1.9600.1.2.11.1.7 |
dotNETCLRExceptionsTableThe Performance console .NET CLR Exceptions category includes counters that provide information about the exceptions thrown by an application. SEQUENCE OF DotNETCLRExceptionsEntry .1.3.6.1.4.1.9600.1.2.12 |
dotNETCLRExceptionsEntryPerformance information for one particular instance of '.NET CLR Exceptions' object. DotNETCLRExceptionsEntry .1.3.6.1.4.1.9600.1.2.12.1 |
nceInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.12.1.1 |
nceNumOfExcepsThrownThis counter displays the total number of exceptions thrown since the start of the application. These include both .NET exceptions and unmanaged exceptions that get converted into .NET exceptions e.g. null pointer reference exception in unmanaged code would get re-thrown in managed code as a .NET System.NullReferenceException; this counter includes both handled and unhandled exceptions. Exceptions that are re-thrown would get counted again. Exceptions should only occur in rare situations and not in the normal control flow of the program.ro Gauge32 .1.3.6.1.4.1.9600.1.2.12.1.2 |
nceNumOfExcepsThrownPerSecThis counter displays the number of exceptions thrown per second. These include both .NET exceptions and unmanaged exceptions that get converted into .NET exceptions e.g. null pointer reference exception in unmanaged code would get re-thrown in managed code as a .NET System.NullReferenceException; this counter includes both handled and unhandled exceptions. Exceptions should only occur in rare situations and not in the normal control flow of the program; this counter was designed as an indicator of potential performance problems due to large (>100s) rate of exceptions thrown. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.12.1.3 |
nceNumOfFiltersPerSecThis counter displays the number of .NET exception filters executed per second. An exception filter evaluates whether an exception should be handled or not. This counter tracks the rate of exception filters evaluated; irrespective of whether the exception was handled or not. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.12.1.4 |
nceNumOfFinallysPerSecThis counter displays the number of finally blocks executed per second. A finally block is guaranteed to be executed regardless of how the try block was exited. Only the finally blocks that are executed for an exception are counted; finally blocks on normal code paths are not counted by this counter. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.12.1.5 |
nceThrowToCatchDepthPerSecThis counter displays the number of stack frames traversed from the frame that threw the .NET exception to the frame that handled the exception per second. This counter resets to 0 when an exception handler is entered; so nested exceptions would show the handler to handler stack depth. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.12.1.6 |
dotNETCLRInteropTableThe Performance console .NET CLR Interop category includes counters that provide information about an application's interaction with COM components, COM+ services, and external type libraries. SEQUENCE OF DotNETCLRInteropEntry .1.3.6.1.4.1.9600.1.2.13 |
dotNETCLRInteropEntryPerformance information for one particular instance of '.NET CLR Interop' object. DotNETCLRInteropEntry .1.3.6.1.4.1.9600.1.2.13.1 |
nciInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.13.1.1 |
nciNumOfCCWsThis counter displays the current number of Com-Callable-Wrappers (CCWs). A CCW is a proxy for the .NET managed object being referenced from unmanaged COM client(s). This counter was designed to indicate the number of managed objects being referenced by unmanaged COM code.ro Gauge32 .1.3.6.1.4.1.9600.1.2.13.1.2 |
nciNumOfStubsThis counter displays the current number of stubs created by the CLR. Stubs are responsible for marshalling arguments and return values from managed to unmanaged code and vice versa; during a COM Interop call or PInvoke call.ro Gauge32 .1.3.6.1.4.1.9600.1.2.13.1.3 |
nciNumOfTLBExportsPerSecReserved for future use.ro Gauge32 .1.3.6.1.4.1.9600.1.2.13.1.4 |
nciNumOfTLBImportsPerSecReserved for future use.ro Gauge32 .1.3.6.1.4.1.9600.1.2.13.1.5 |
nciNumOfMarshallingThis counter displays the total number of times arguments and return values have been marshaled from managed to unmanaged code and vice versa since the start of the application. This counter is not incremented if the stubs are inlined. (Stubs are responsible for marshalling arguments and return values). Stubs usually get inlined if the marshalling overhead is small.ro Gauge32 .1.3.6.1.4.1.9600.1.2.13.1.6 |
dotNETCLRJitTableThe Performance console .NET CLR JIT category includes counters that provide information about code that has been JIT-compiled. SEQUENCE OF DotNETCLRJitEntry .1.3.6.1.4.1.9600.1.2.14 |
dotNETCLRJitEntryPerformance information for one particular instance of '.NET CLR Jit' object. DotNETCLRJitEntry .1.3.6.1.4.1.9600.1.2.14.1 |
ncjInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.14.1.1 |
ncjNumOfILBytesJittedThis counter displays the total IL bytes jitted since the start of the application. This counter is exactly equivalent to the 'Total # of IL Bytes Jitted' counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.14.1.2 |
ncjNumOfMethodsJittedThis counter displays the total number of methods compiled Just-In-Time (JIT) by the CLR JIT compiler since the start of the application. This counter does not include the pre-jitted methods.ro Gauge32 .1.3.6.1.4.1.9600.1.2.14.1.3 |
ncjPercentTimeInJitThis counter displays the percentage of elapsed time spent in JIT compilation since the last JIT compilation phase. This counter is updated at the end of every JIT compilation phase. A JIT compilation phase is the phase when a method and its dependencies are being compiled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.14.1.4 |
ncjILBytesJittedPerSecThis counter displays the rate at which IL bytes are jitted per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.14.1.5 |
ncjStandardJitFailuresThis counter displays the peak number of methods the JIT compiler has failed to JIT since the start of the application. This failure can occur if the IL cannot be verified or if there was an internal error in the JIT compiler.ro Gauge32 .1.3.6.1.4.1.9600.1.2.14.1.6 |
ncjTotalNumOfILBytesJittedThis counter displays the total IL bytes jitted since the start of the application. This counter is exactly equivalent to the '# of IL Bytes Jitted' counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.14.1.7 |
dotNETCLRLoadingTableThe Performance console .NET CLR Loading category includes counters that provide information about assemblies, classes, and application domains that are loaded. SEQUENCE OF DotNETCLRLoadingEntry .1.3.6.1.4.1.9600.1.2.15 |
dotNETCLRLoadingEntryPerformance information for one particular instance of '.NET CLR Loading' object. DotNETCLRLoadingEntry .1.3.6.1.4.1.9600.1.2.15.1 |
nclInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.15.1.1 |
nclPercentTimeLoadingReserved for future use.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.2 |
nclAssemblySearchLengthReserved for future use.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.3 |
nclBytesInLoaderHeapThis counter displays the current size (in bytes) of the memory committed by the class loader across all AppDomains. (Committed memory is the physical memory for which space has been reserved on the disk paging file.)ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.4 |
nclCurrentAssembliesThis counter displays the current number of Assemblies loaded across all AppDomains in this application. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.5 |
nclCurrentClassesLoadedThis counter displays the current number of classes loaded in all Assemblies.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.6 |
nclCurrentAppdomainsThis counter displays the current number of AppDomains loaded in this application. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.7 |
nclRateOfAssembliesThis counter displays the number of Assemblies loaded across all AppDomains per second. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.8 |
nclRateOfClassesLoadedThis counter displays the number of classes loaded per second in all Assemblies. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.9 |
nclRateOfLoadFailuresThis counter displays the number of classes that failed to load per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval. These load failures could be due to many reasons like inadequate security or illegal format. Full details can be found in the profiling services help.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.10 |
nclRateOfAppdomainsThis counter displays the number of AppDomains loaded per second. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.11 |
nclRateOfAppdomainsUnloadedThis counter displays the number of AppDomains unloaded per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.12 |
nclTotalNumOfLoadFailuresThis counter displays the peak number of classes that have failed to load since the start of the application. These load failures could be due to many reasons like inadequate security or illegal format. Full details can be found in the profiling services help.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.13 |
nclTotalAppdomainsThis counter displays the peak number of AppDomains loaded since the start of this application. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.14 |
nclTotalAssembliesThis counter displays the total number of Assemblies loaded since the start of this application. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.15 |
nclTotalClassesLoadedThis counter displays the cumulative number of classes loaded in all Assemblies since the start of this application.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.16 |
nclTotalAppdomainsUnloadedThis counter displays the total number of AppDomains unloaded since the start of the application. If an AppDomain is loaded and unloaded multiple times this counter would count each of those unloads as separate.ro Gauge32 .1.3.6.1.4.1.9600.1.2.15.1.17 |
dotNETCLRLocksAndThreadsTableThe Performance console .NET CLR LocksAndThreads category includes counters that provide information about managed locks and threads that an application uses. SEQUENCE OF DotNETCLRLocksAndThreadsEntry .1.3.6.1.4.1.9600.1.2.16 |
dotNETCLRLocksAndThreadsEntryPerformance information for one particular instance of '.NET CLR LocksAndThreads' object. DotNETCLRLocksAndThreadsEntry .1.3.6.1.4.1.9600.1.2.16.1 |
ncltInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.16.1.1 |
ncltNumOfCurrentLogicalThreadThis counter displays the number of current .NET thread objects in the application. A .NET thread object is created either by new System.Threading.Thread or when an unmanaged thread enters the managed environment. This counters maintains the count of both running and stopped threads. This counter is not an average over time; it just displays the last observed value.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.2 |
ncltNumOfCurrentPhysicalThreadThis counter displays the number of native OS threads created and owned by the CLR to act as underlying threads for .NET thread objects. This counters value does not include the threads used by the CLR in its internal operations; it is a subset of the threads in the OS process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.3 |
ncltNumOfCurrentRecognizedThreadThis counter displays the number of threads that are currently recognized by the CLR; they have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.4 |
ncltNumOfTotalRecognizedThreadThis counter displays the total number of threads that have been recognized by the CLR since the start of this application; these threads have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.5 |
ncltContentionRatePerSecRate at which threads in the runtime attempt to acquire a managed lock unsuccessfully. Managed locks can be acquired in many ways; by the 'lock' statement in C# or by calling System.Monitor.Enter or by using MethodImplOptions.Synchronized custom attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.6 |
ncltCurrentQueueLengthThis counter displays the total number of threads currently waiting to acquire some managed lock in the application. This counter is not an average over time; it displays the last observed value.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.7 |
ncltQueueLengthPerSecThis counter displays the number of threads per second waiting to acquire some lock in the application. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.8 |
ncltQueueLengthPeakThis counter displays the total number of threads that waited to acquire some managed lock since the start of the application.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.9 |
ncltTotalNumOfContentionsThis counter displays the total number of times threads in the CLR have attempted to acquire a managed lock unsuccessfully. Managed locks can be acquired in many ways; by the 'lock' statement in C# or by calling System.Monitor.Enter or by using MethodImplOptions.Synchronized custom attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.10 |
ncltRateOfRecognizedThreadPerSecThis counter displays the number of threads per second that have been recognized by the CLR; these threads have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.16.1.11 |
dotNETCLRMemoryTableThe Performance console .NET CLR Memory category includes counters that provide information about the garbage collector. SEQUENCE OF DotNETCLRMemoryEntry .1.3.6.1.4.1.9600.1.2.17 |
dotNETCLRMemoryEntryPerformance information for one particular instance of '.NET CLR Memory' object. DotNETCLRMemoryEntry .1.3.6.1.4.1.9600.1.2.17.1 |
ncmInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.17.1.1 |
ncmNumBytesInAllHeapsThis counter is the sum of four other counters; Gen 0 Heap Size; Gen 1 Heap Size; Gen 2 Heap Size and the Large Object Heap Size. This counter indicates the current memory allocated in bytes on the GC Heaps.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.2 |
ncmNumGCHandlesThis counter displays the current number of GC Handles in use. GCHandles are handles to resources external to the CLR and the managed environment. Handles occupy small amounts of memory in the GCHeap but potentially expensive unmanaged resources.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.3 |
ncmNumGen0CollectionsThis counter displays the number of times the generation 0 objects (youngest; most recently allocated) are garbage collected (Gen 0 GC) since the start of the application. Gen 0 GC occurs when the available memory in generation 0 is not sufficient to satisfy an allocation request. This counter is incremented at the end of a Gen 0 GC. Higher generation GCs include all lower generation GCs. This counter is explicitly incremented when a higher generation (Gen 1 or Gen 2) GC occurs. _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.4 |
ncmNumGen1CollectionsThis counter displays the number of times the generation 1 objects are garbage collected since the start of the application. The counter is incremented at the end of a Gen 1 GC. Higher generation GCs include all lower generation GCs. This counter is explicitly incremented when a higher generation (Gen 2) GC occurs. _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.5 |
ncmNumGen2CollectionsThis counter displays the number of times the generation 2 objects (older) are garbage collected since the start of the application. The counter is incremented at the end of a Gen 2 GC (also called full GC). _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.6 |
ncmNumInducedGCThis counter displays the peak number of times a garbage collection was performed because of an explicit call to GC.Collect. Its a good practice to let the GC tune the frequency of its collections.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.7 |
ncmNumTotalCommittedBytesThis counter displays the amount of virtual memory (in bytes) currently committed by the Garbage Collector. (Committed memory is the physical memory for which space has been reserved on the disk paging file).ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.8 |
ncmNumTotalReservedBytesThis counter displays the amount of virtual memory (in bytes) currently reserved by the Garbage Collector. (Reserved memory is the virtual memory space reserved for the application but no disk or main memory pages have been used.)ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.9 |
ncmNumOfPinnedObjectsThis counter displays the number of pinned objects encountered in the last GC. This counter tracks the pinned objects only in the heaps that were garbage collected e.g. a Gen 0 GC would cause enumeration of pinned objects in the generation 0 heap only. A pinned object is one that the Garbage Collector cannot move in memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.10 |
ncmNumOfSinkBlocksInUseThis counter displays the current number of sync blocks in use. Sync blocks are per-object data structures allocated for storing synchronization information. Sync blocks hold weak references to managed objects and need to be scanned by the Garbage Collector. Sync blocks are not limited to storing synchronization information and can also store COM interop metadata. This counter was designed to indicate performance problems with heavy use of synchronization primitives.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.11 |
ncmPercentTimeInGC% Time in GC is the percentage of elapsed time that was spent in performing a garbage collection (GC) since the last GC cycle. This counter is usually an indicator of the work done by the Garbage Collector on behalf of the application to collect and compact memory. This counter is updated only at the end of every GC and the counter value reflects the last observed value; its not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.12 |
ncmAllocatedBytesPerSecThis counter displays the rate of bytes per second allocated on the GC Heap. This counter is updated at the end of every GC; not at each allocation. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.13 |
ncmFinalizationSurvivorsThis counter displays the number of garbage collected objects that survive a collection because they are waiting to be finalized. If these objects hold references to other objects then those objects also survive but are not counted by this counter; the 'Promoted Finalization-Memory from Gen 0' and 'Promoted Finalization-Memory from Gen 1' counters represent all the memory that survived due to finalization. This counter is not a cumulative counter; its updated at the end of every GC with count of the survivors during that particular GC only. This counter was designed to indicate the extra overhead that the application might incur because of finalization.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.14 |
ncmGen0PromotedBytesPerSecThis counter displays the bytes per second that are promoted from generation 0 (youngest) to generation 1; objects that are promoted just because they are waiting to be finalized are not included in this counter. Memory is promoted when it survives a garbage collection. This counter was designed as an indicator of relatively long-lived objects being created per sec. This counter displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.15 |
ncmGen0HeapSizeThis counter displays the maximum bytes that can be allocated in generation 0 (Gen 0); its does not indicate the current number of bytes allocated in Gen 0. A Gen 0 GC is triggered when the allocations since the last GC exceed this size. The Gen 0 size is tuned by the Garbage Collector and can change during the execution of the application. At the end of a Gen 0 collection the size of the Gen 0 heap is infact 0 bytes; this counter displays the size (in bytes) of allocations that would trigger the next Gen 0 GC. This counter is updated at the end of a GC; its not updated on every allocation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.16 |
ncmGen1PromotedBytesPerSecThis counter displays the bytes per second that are promoted from generation 1 to generation 2 (oldest); objects that are promoted just because they are waiting to be finalized are not included in this counter. Memory is promoted when it survives a garbage collection. Nothing is promoted from generation 2 since it is the oldest. This counter was designed as an indicator of very long-lived objects being created per sec. This counter displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.17 |
ncmGen1HeapSizeThis counter displays the current number of bytes in generation 1 (Gen 1); this counter does not display the maximum size of Gen 1. Objects are not directly allocated in this generation; they are promoted from previous Gen 0 GCs. This counter is updated at the end of a GC; its not updated on every allocation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.18 |
ncmGen2HeapSizeThis counter displays the current number of bytes in generation 2 (Gen 2). Objects are not directly allocated in this generation; they are promoted from Gen 1 during previous Gen 1 GCs. This counter is updated at the end of a GC; its not updated on every allocation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.19 |
ncmLargeObjectHeapSizeThis counter displays the current size of the Large Object Heap in bytes. Objects greater than 20 KBytes are treated as large objects by the Garbage Collector and are directly allocated in a special heap; they are not promoted through the generations. This counter is updated at the end of a GC; its not updated on every allocation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.20 |
ncmPromotFinalizationMemoryGen0This counter displays the bytes of memory that are promoted from generation 0 to generation 1 just because they are waiting to be finalized. This counter displays the value observed at the end of the last GC; its not a cumulative counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.21 |
ncmPromotFinalizationMemoryGen1This counter displays the bytes of memory that are promoted from generation 1 to generation 2 just because they are waiting to be finalized. This counter displays the value observed at the end of the last GC; its not a cumulative counter. This counter is reset to 0 if the last GC was a Gen 0 GC only.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.22 |
ncmPromotedMemoryFromGen0This counter displays the bytes of memory that survive garbage collection (GC) and are promoted from generation 0 to generation 1; objects that are promoted just because they are waiting to be finalized are not included in this counter. This counter displays the value observed at the end of the last GC; its not a cumulative counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.23 |
ncmPromotedMemoryFromGen1This counter displays the bytes of memory that survive garbage collection (GC) and are promoted from generation 1 to generation 2; objects that are promoted just because they are waiting to be finalized are not included in this counter. This counter displays the value observed at the end of the last GC; its not a cumulative counter. This counter is reset to 0 if the last GC was a Gen 0 GC only.ro Gauge32 .1.3.6.1.4.1.9600.1.2.17.1.24 |
dotNETCLRNetworkingTableThe Performance console .NET CLR Networking category includes counters that provide information about data that an application sends and receives over the network. SEQUENCE OF DotNETCLRNetworkingEntry .1.3.6.1.4.1.9600.1.2.18 |
dotNETCLRNetworkingEntryPerformance information for one particular instance of '.NET CLR Networking' object. DotNETCLRNetworkingEntry .1.3.6.1.4.1.9600.1.2.18.1 |
ncnInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.18.1.1 |
ncnBytesReceivedThe cumulative total number of bytes received over all open socket connections since the process was started. This number includes data and any protocol information that is not defined by the TCP/IP protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.18.1.2 |
ncnBytesSentThe cumulative total number of bytes sent over all open socket connections since the process was started. This number includes data and any protocol information that is not defined by the TCP/IP protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.18.1.3 |
ncnConnectionsEstablishedThe cumulative total number of socket connections established for this process since the process was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.18.1.4 |
ncnDatagramsReceivedThe cumulative total number of datagram packets received since the process was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.18.1.5 |
ncnDatagramsSentThe cumulative total number of datagram packets sent since the process was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.18.1.6 |
dotNETCLRRemotingTableThe Performance console .NET CLR Remoting category includes counters that provide information about the remoted objects that an application uses. SEQUENCE OF DotNETCLRRemotingEntry .1.3.6.1.4.1.9600.1.2.19 |
dotNETCLRRemotingEntryPerformance information for one particular instance of '.NET CLR Remoting' object. DotNETCLRRemotingEntry .1.3.6.1.4.1.9600.1.2.19.1 |
ncrInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.19.1.1 |
ncrChannelsThis counter displays the total number of remoting channels registered across all AppDomains since the start of the application. Channels are used to transport messages to and from remote objects.ro Gauge32 .1.3.6.1.4.1.9600.1.2.19.1.2 |
ncrContextProxiesThis counter displays the total number of remoting proxy objects created in this process since the start of the process. Proxy object acts as a representative of the remote objects and ensures that all calls made on the proxy are forwarded to the correct remote object instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.19.1.3 |
ncrContextBoundClassesLoadedThis counter displays the current number of context-bound classes loaded. Classes that can be bound to a context are called context-bound classes; context-bound classes are marked with Context Attributes which provide usage rules for synchronization; thread affinity; transactions etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.19.1.4 |
ncrContextBoundObjsAllocPerSecThis counter displays the number of context-bound objects allocated per second. Instances of classes that can be bound to a context are called context-bound objects; context-bound classes are marked with Context Attributes which provide usage rules for synchronization; thread affinity; transactions etc. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.19.1.5 |
ncrContextsThis counter displays the current number of remoting contexts in the application. A context is a boundary containing a collection of objects with the same usage rules like synchronization; thread affinity; transactions etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.19.1.6 |
ncrRemoteCallsPerSecThis counter displays the number of remote procedure calls invoked per second. A remote procedure call is a call on any object outside the caller;s AppDomain. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.19.1.7 |
ncrTotalRemoteCallsThis counter displays the total number of remote procedure calls invoked since the start of this application. A remote procedure call is a call on any object outside the caller;s AppDomain.ro Gauge32 .1.3.6.1.4.1.9600.1.2.19.1.8 |
dotNETCLRSecurityTableThe Performance console .NET CLR Security category includes counters that provide information about the security checks that the common language runtime performs for an application. SEQUENCE OF DotNETCLRSecurityEntry .1.3.6.1.4.1.9600.1.2.20 |
dotNETCLRSecurityEntryPerformance information for one particular instance of '.NET CLR Security' object. DotNETCLRSecurityEntry .1.3.6.1.4.1.9600.1.2.20.1 |
ncsInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.20.1.1 |
ncsNumLinkTimeChecksThis counter displays the total number of linktime Code Access Security (CAS) checks since the start of the application. Linktime CAS checks are performed when a caller makes a call to a callee demanding a particular permission at JIT compile time; linktime check is performed once per caller. This count is not indicative of serious performance issues; its indicative of the security system activity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.20.1.2 |
ncsPercentTimeSigAuthenticatingReserved for future use.ro Gauge32 .1.3.6.1.4.1.9600.1.2.20.1.3 |
ncsPercentTimeInRTChecksThis counter displays the percentage of elapsed time spent in performing runtime Code Access Security (CAS) checks since the last such check. CAS allows code to be trusted to varying degrees and enforces these varying levels of trust depending on code identity. This counter is updated at the end of a runtime security check; it represents the last observed value; its not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.20.1.4 |
ncsStackWalkDepthThis counter displays the depth of the stack during that last runtime Code Access Security check. Runtime Code Access Security check is performed by crawling the stack. This counter is not an average; it just displays the last observed value.ro Gauge32 .1.3.6.1.4.1.9600.1.2.20.1.5 |
ncsTotalRuntimeChecksThis counter displays the total number of runtime Code Access Security (CAS) checks performed since the start of the application. Runtime CAS checks are performed when a caller makes a call to a callee demanding a particular permission; the runtime check is made on every call by the caller; the check is done by examining the current thread stack of the caller. This counter used together with 'Stack Walk Depth' is indicative of performance penalty for security checks.ro Gauge32 .1.3.6.1.4.1.9600.1.2.20.1.6 |
fileReplicaConnTableThe FileReplicaConn performance object displays performance statistics of the REPLICACONN object that defines replica connections to distributed file system (Dfs) roots. SEQUENCE OF FileReplicaConnEntry .1.3.6.1.4.1.9600.1.2.21 |
fileReplicaConnEntryPerformance information for one particular instance of 'FileReplicaConn' object. FileReplicaConnEntry .1.3.6.1.4.1.9600.1.2.21.1 |
frcInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.21.1.1 |
frcAuthenticationsThe number of successful authentication checks made on packets received from the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.2 |
frcAuthenticationsInErrorThe cumulative number of authentication check failures detected on packets received from the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.3 |
frcBindingsThe number of successful RPC bind requests to the FRS server on the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.4 |
frcBindingsInErrorThe cumulative number of unsuccessful RPC bind requests to the FRS server on the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.5 |
frcCommunicationTimeoutsThe cumulative number of times a communication request has taken too long to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.6 |
frcFetchBlocksReceivedThe number of blocks of staging file data received from the partner associated with this connection. The underlying transport may break a block into a smaller number of packets on the wire.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.7 |
frcFetchBlocksReceivedInBytesThe number of bytes of staging file data received from the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.8 |
frcFetchBlocksSentThe number of blocks of staging file data sent to the partner associated with this connection. The underlying transport may break a block into a smaller number of packets on the wire.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.9 |
frcFetchBlocksSentInBytesThe number of bytes of staging file data sent to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.10 |
frcFetchRequestsReceivedThe number of staging files received from the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.11 |
frcFetchRequestsSentThe number of staging files requested from the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.12 |
frcInboundChangeOrdersDampenedThe number of change orders received from the partner associated with this connection that have been filtered out by the inbound dampening check.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.13 |
frcJoinNotificationsReceivedThe number of partner join notifications received from the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.14 |
frcJoinNotificationsSentThe number of partner join requests (if this is an inbound connection) or ready-to-join notifications (if this is an outbound connection) sent to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.15 |
frcJoinsThe number of successful joins with the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.16 |
frcLocalChangeOrdersSentThe number of locally originated replication change orders that have been sent to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.17 |
frcLocalChangeOrdersSentAtJoinThe number of locally originated replication change orders produced by a partner induced version vector scan that have been sent to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.18 |
frcOutboundChangeOrdersDampenedThe number of change orders sent to the partner associated with this connection that have been filtered out by the outbound dampening check and thus were never sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.19 |
frcPacketsSentThe total number of FRS data and control packets sent to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.20 |
frcPacketsSentInBytesThe total number of FRS data and control bytes sent to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.21 |
frcPacketsSentInErrorThe cumulative number of FRS data or control packets not sent because of some error condition associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.22 |
frcRemoteChangeOrdersReceivedThe number of change orders received from the partner associated with this connection that have passed the inbound dampening check.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.23 |
frcRemoteChangeOrdersSentThe number of replication change orders originating upstream from this member (i.e. remote) that have been sent to the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.24 |
frcUnjoinsThe number of unjoins with the partner associated with this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.21.1.25 |
fileReplicaSetTableThe FileReplicaSet performance object displays performance statistics of the REPLICASET object that defines a replica set (one or more replicas, shared volumes or directories that store duplicates of the contents of an original share). The object reports statistics for the computer that constitutes the original share. For example, in a bidirectional ring topology of three computers A, B, and C, where computer A and computer C both replicate from computer B, the FileReplicaSet counters would provide data for computer B. SEQUENCE OF FileReplicaSetEntry .1.3.6.1.4.1.9600.1.2.22 |
fileReplicaSetEntryPerformance information for one particular instance of 'FileReplicaSet' object. FileReplicaSetEntry .1.3.6.1.4.1.9600.1.2.22.1 |
frsInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.22.1.1 |
frsAuthenticationsThe number of successful authentication checks made on packets received from any partner associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.2 |
frsAuthenticationsInErrorThe cumulative number of authentication check failures detected on packets received from any partner associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.3 |
frsBindingsThe number of successful RPC bind requests to the FRS server on any partner associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.4 |
frsBindingsInErrorThe cumulative number of unsuccessful RPC bind requests to the FRS server on any partner associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.5 |
frsBytesOfFilesInstalledThe total number of bytes of staging file data that have been installed on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.6 |
frsBytesOfStagingFetchedThe total number of bytes of staging file data received by this replica set member from its inbound partners.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.7 |
frsBytesOfStagingGeneratedThe total number of bytes of staging file data generated by this replica set member not including the number of bytes produced as part of regeneration.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.8 |
frsBytesOfStagingRegeneratedThe total number of bytes of staging file data regenerated by this replica set member for a specific outbound partner request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.9 |
frsChgOrdersAbortedThe number of local plus remote file updates that were aborted on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.10 |
frsChgOrdersEvaporatedThe number of local file updates that were never processed because the underlying file was deleted first.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.11 |
frsChgOrdersIssuedThe number of local plus remote file updates initiated on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.12 |
frsChgOrdersMorphedThe number of local plus remote file updates that encountered a name space collision on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.13 |
frsChgOrdersPropagatedThe number of local plus remote file updates that were propagated to the outbound log of this replica set member. The update remains pending in the outbound log until it has been delivered to all outbound partners.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.14 |
frsChgOrdersReceivedThe number of local plus remote file updates that have been received by this replica set member. Note that depending on the replication topology it is possible for the same remote file update to be sent from multiple inbound partners. However, only one will send the actual file data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.15 |
frsChgOrdersRetiredThe number of local plus remote file updates retired on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.16 |
frsChgOrdersRetriedThe number of local plus remote file updates that were retried for any reason on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.17 |
frsChgOrdersRetriedFetchThe number of local plus remote file updates that were retried due to a stage file fetch problem on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.18 |
frsChgOrdersRetriedGenerateThe number of local plus remote file updates that were retried due to a stage file generation problem on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.19 |
frsChgOrdersRetriedInstallThe number of local plus remote file updates that were retried due to a stage file install problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.20 |
frsChgOrdersRetriedRenameThe number of local plus remote file updates that were retried due to a problem during the final target file rename or delete operation on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.21 |
frsChgOrdersSentThe number of local plus remote file updates that have been sent to the outbound partners of this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.22 |
frsCommunicationTimeoutsThe cumulative number of FRS data or control packets not sent to an outbound partner because the send request timed out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.23 |
frsDSBindingsThe number of times FRS has attempted to acquire a binding handle to the active directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.24 |
frsDSBindingsInErrorThe cumulative number of attempts to acquire a binding handle to the active directory that failed with some error status.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.25 |
frsDSObjectsThe number of FRS configuration Objects retreived from the directory service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.26 |
frsDSObjectsInErrorThe cumulative count of FRS configuration objects retreived from the directory service that were missing either the distinguished name, object GUID or the relative distinguished name attributes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.27 |
frsDSPollsThe number of times FRS has polled the active directory for FRS configuration information on this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.28 |
frsDSPollsWithChgsThe number of times FRS has polled the active directory for FRS configuration information and configuration changes were found.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.29 |
frsDSPollsWithoutChgsThe number of times FRS has polled the active directory for FRS configuration information and no configuration changes were found.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.30 |
frsDSSearchesThe number of times FRS has made a search request to the active directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.31 |
frsDSSearchesInErrorThe cumulative number of times FRS has made a search request to the active directory and the request returned with an error condition.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.32 |
frsFetchBlocksReceivedThe number of blocks of staging file data received from all inbound partners associated with this replica set member. The underlying transport may break a block into a smaller number of packets on the wire.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.33 |
frsFetchBlocksReceivedInBytesThe total number of bytes of staging file data received by this replica set member from all inbound partners.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.34 |
frsFetchBlocksSentThe number of blocks of staging file data sent to any outbound partner associated with this replica set member. The underlying transport may break a block into a smaller number of packets on the wire.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.35 |
frsFetchBlocksSentInBytesThe total number of bytes of staging file data sent to the outbound partners of this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.36 |
frsFetchRequestsReceivedThe number of staging files received from all inbound partners associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.37 |
frsFetchRequestsSentThe number of staging files requested from any inbound partner associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.38 |
frsFilesInstalledThe number of file updates and deletes performed on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.39 |
frsFilesInstalledWithErrorThe cumulative number of file updates that were aborted because of some non-recoverable error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.40 |
frsInboundChgOrdersDampenedThe number of remotely originated file updates that were dampened because the update was already delivered by another member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.41 |
frsJoinNotificationsReceivedThe number of partner join notifications received from all inbound partners associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.42 |
frsJoinNotificationsSentThe number of inbound partner join requests or outbound partner ready-to-join notifications sent to all partners associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.43 |
frsJoinsThe number of successful joins with any partner associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.44 |
frsKBOfStagingSpaceFreeThe amount of staging space (in Kilobyte units) currently available within the staging space limit. Note that there may not actually be this amount of free space left on the staging volume.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.45 |
frsKBOfStagingSpaceInUseThe amount of staging space (in Kilobyte units) currently in use.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.46 |
frsLocalChgOrdersAbortedThe number of locally originated file updates that were aborted. Most likely because a file was deleted before a change to it could be propagated so no stage file could be generated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.47 |
frsLocalChgOrdersIssuedThe number of locally originated file updates initiated on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.48 |
frsLocalChgOrdersMorphedThe number of locally originated file updates that encountered a name space collision on this replica set member. Most likely caused by the reanimation of a parent dir.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.49 |
frsLocalChgOrdersPropagatedThe number of locally originated file updates that were propagated to the outbound log of this replica set member. The update remains pending in the outbound log until it has been delivered to all outbound partners.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.50 |
frsLocalChgOrdersRetiredThe number of locally originated file updates retired on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.51 |
frsLocalChgOrdersRetriedThe number of locally originated file updates that were retried for any reason on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.52 |
frsLocalChgOrdersRetriedFetchThe number of locally originated file updates that were retried due to a stage file fetch problem on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.53 |
frsLocalChgOrdersRetriedGenerateThe number of locally originated file updates that were retried due to a stage file generation problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.54 |
frsLocalChgOrdersRetriedInstallThe number of locally originated file updates that were retried due to a stage file install problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.55 |
frsLocalChgOrdersRetriedRenameThe number of locally originated file updates that were retried due to a problem during the final target file rename or delete operation on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.56 |
frsLocalChgOrdersSentThe number of locally originated file updates that have been sent to the outbound partners of this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.57 |
frsLocalChgOrdersSentJoinThe number of locally originated file updates which were created by a partner induced version vector scan that have been sent to the outbound partners of this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.58 |
frsOutboundChgOrdersDampenedThe number of pending outbound file updates that were dampened because the outbound partner has already received it from another source.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.59 |
frsPacketsReceivedThe number of FRS data or control packets (RPC calls) received by FRS.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.60 |
frsPacketsReceivedInBytesThe total number of FRS data and control bytes received by all replica sets on this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.61 |
frsPacketsReceivedInErrorThe cumulative number of FRS data or control packets received that were out of rev or otherwise malformed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.62 |
frsPacketsSentThe number of FRS data and control packets sent to all outbound partners associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.63 |
frsPacketsSentInBytesThe total number of FRS data and control bytes sent by this replica set member to other members.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.64 |
frsPacketsSentInErrorThe cumulative number of FRS data or control packets not sent to an outbound partner because of some error condition.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.65 |
frsRemoteChgOrdersAbortedThe number of remotely originated file updates that were aborted. Most likely because of an attempt to fetch a staging file from an inbound partner and the partner no longer has the file because it has been deleted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.66 |
frsRemoteChgOrdersIssuedThe number of remotely originated file updates initiated on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.67 |
frsRemoteChgOrdersMorphedThe number of remotely originated file updates that encountered a name space collision on this replica set member. Most likely caused by simultaneous create of a file or directory with the same name on more than one replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.68 |
frsRemoteChgOrdersPropagatedThe number of remotely originated file updates that were propagated to the outbound log of this replica set member. The update remains pending in the outbound log until it has been delivered to all outbound partners.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.69 |
frsRemoteChgOrdersReceivedThe number of remotely originated file updates that have been received by this replica set member. Note that depending on the replication topology it is possible for the same file update to be sent from multiple inbound partners. However, only one will send the actual file data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.70 |
frsRemoteChgOrdersRetiredThe number of remotely originated file updates retired on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.71 |
frsRemoteChgOrdersRetriedThe number of remotely originated file updates that were retried for any reason on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.72 |
frsRemoteChgOrdersRetriedFetchThe number of remotely originated file updates that were retried due to a stage file fetch problem on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.73 |
frsRemoteChgOrdersRetriedGeneratThe number of remotely originated file updates that were retried due to a stage file generation problem on this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.74 |
frsRemoteChgOrdersRetriedInstallThe number of remotely originated file updates that were retried due to a stage file install problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.75 |
frsRemoteChgOrdersRetriedRenameThe number of remotely originated file updates that were retried due to a problem during the final target file rename or delete operation on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.76 |
frsRemoteChgOrdersSentThe number of remotely originated file updates that have been sent to the outbound partners of this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.77 |
frsReplicaSetsCreatedThe cumulative number of replica sets to which this computer has been added as a member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.78 |
frsReplicaSetsDeletedThe cumulative number of replica sets from which this computer's membership has been provisionally deleted, but could still be reanimated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.79 |
frsReplicaSetsRemovedThe cumulative number of replica sets from which this computer's membership has been permanently deleted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.80 |
frsReplicaSetsStartedThe number of replica sets for which processing has been started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.81 |
frsStagingFilesFetchedThe number of staging files requested by this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.82 |
frsStagingFilesGeneratedThe number of staging files generated by this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.83 |
frsStagingFilesGeneratedWithErrThe cumulative number of staging files generated by this replica set member where an error was detected during generation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.84 |
frsStagingFilesRegeneratedThe number of staging files regenerated by this replica set member for a specific outbound partner request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.85 |
frsThreadsExitedThe number of execution threads that have terminated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.86 |
frsThreadsStartedThe number of new execution threads started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.87 |
frsUnjoinsThe number of unjoins with any partner associated with this replica set member.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.88 |
frsUsnReadsThe number of times FRS has initiated a read on the NTFRS change log. Each volume has its own change log.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.89 |
frsUsnRecordsAcceptedThe number of NTFS change log records accepted by FRS for further processing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.90 |
frsUsnRecordsExaminedThe number of NTFS change log records examined by FRS.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.91 |
frsUsnRecordsRejectedThe number of NTFS change log records skipped by FRS. Most likely because the change log record was for a file not part of any active replica set.ro Gauge32 .1.3.6.1.4.1.9600.1.2.22.1.92 |
ftpServiceTableThe FTP Service performance object consists of counters that show data about the Internet Information Services FTP service. SEQUENCE OF FTPServiceEntry .1.3.6.1.4.1.9600.1.2.23 |
ftpServiceEntryPerformance information for one particular instance of 'FTP Service' object. FTPServiceEntry .1.3.6.1.4.1.9600.1.2.23.1 |
ftpSvcInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.23.1.1 |
ftpSvcBytesReceivedPerSecBytes Received/sec is the rate that data bytes are received by the FTP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.2 |
ftpSvcBytesSentPerSecBytes Sent/sec is the rate that data bytes are sent by the FTP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.3 |
ftpSvcBytesTotalPerSecBytes Total/sec is the sum of Bytes Sent/sec and Bytes Received/sec. This is the total rate of bytes transferred by the FTP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.4 |
ftpSvcCurrentAnonymousUsersCurrent Anonymous Users is the number of users who currently have an anonymous connection using the FTP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.5 |
ftpSvcCurrentConnectionsCurrent Connections is the current number of connections established with the FTP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.6 |
ftpSvcCurrentNonAnonymousUsersCurrent NonAnonymous Users is the number of users who currently have a non-anonymous connection using the FTP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.7 |
ftpSvcFTPServiceUptimeFTP Serive and FTP site uptime in seconds.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.8 |
ftpSvcMaximumAnonymousUsersMaximum Anonymous Users is the maximum number of users who established concurrent anonymous connections using the FTP service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.9 |
ftpSvcMaximumConnectionsMaximum Connections is the maximum number of simultaneous connections established with the FTP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.10 |
ftpSvcMaximumNonAnonymousUsersMaximum NonAnonymous Users is the maximum number of users who established concurrent non-anonymous connections using the FTP service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.11 |
ftpSvcTotalAnonymousUsersTotal Anonymous Users is the total number of users who established an anonymous connection with the FTP service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.12 |
ftpSvcTotalConnAttemptsAllInstTotal Connection Attempts is the number of connections that have been attempted using the FTP service (since service startup). This counter is for all instances listed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.13 |
ftpSvcTotalFilesReceivedTotal Files Received is the total number of files received by the FTP service since service startup.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.14 |
ftpSvcTotalFilesSentTotal Files Sent is the total number of files sent by the FTP service since service startup.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.15 |
ftpSvcTotalFilesTransferredTotal Files Transferred is the sum of Files Sent and Files Received. This is the total number of files transferred by the FTP service since service startup.ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.16 |
ftpSvcTotalLogonAttemptsTotal Logon Attempts is the number of logons that have been attempted using the FTP service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.17 |
ftpSvcTotalNonAnonymousUsersTotal NonAnonymous Users is the total number of users who established a non-anonymous connection with the FTP service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.23.1.18 |
gatewayServiceForNetWareThe Gateway for NetWare Service performance object consists of counters that measure packet transmission rates and activity of the Gateway for NetWare service. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.24 |
nwBytesReceivedPerSecBytes Received/sec is the rate of bytes coming in to the Redirector from the network. It includes all application data as well as network protocol information (such as packet headers).ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.1 |
nwBytesTotalPerSecBytes Total/sec is the rate the Redirector is processing data bytes. This includes all application and file data in addition to protocol information such as packet headers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.2 |
nwBytesTransmittedPerSecBytes Transmitted/sec is the rate at which bytes are leaving the Redirector to the network. It includes all application data as well as network protocol information (such as packet headers and the like).ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.3 |
nwConnectNetWare2XConnect NetWare 2.x counts connections to NetWare 2.x servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.4 |
nwConnectNetWare3XConnect NetWare 3.x counts connections to NetWare 3.x servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.5 |
nwConnectNetWare4XConnect NetWare 4.x counts connections to NetWare 4.x servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.6 |
nwFileDataOperationsPerSecFile Data Operations/sec is the rate the Redirector is processing data operations. One operation includes (hopefully) many bytes. We say hopefully here because each operation has overhead. You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.7 |
nwFileReadOperationsPerSecFile Read Operations/sec is the rate at which applications are asking the Redirector for data. Each call to a file system or similar Application Program Interface (API) call counts as one operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.8 |
nwFileWriteOperationsPerSecFile Write Operations/sec is the rate at which applications are sending data to the Redirector. Each call to a file system or similar Application Program Interface (API) call counts as one operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.9 |
nwPacketBurstIOPerSecPacket Burst IO/sec is the sum of Packet Burst Read NCPs/sec and Packet Burst Write NCPs/sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.10 |
nwPacketBurstReadNCPCountPerSecPacket Burst Read NCP Count/sec is the rate of NetWare Core Protocol requests for Packet Burst Read. Packet Burst is a windowing protocol that improves performance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.11 |
nwPacketBurstReadTimeoutsPerSecPacket Burst Read Timeouts/sec is the rate the NetWare Service needs to retransmit a Burst Read Request because the NetWare server took too long to respond.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.12 |
nwPacketBurstWriteNCPCountPerSecPacket Burst Write NCP Count/sec is the rate of NetWare Core Protocol requests for Packet Burst Write. Packet Burst is a windowing protocol that improves performance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.13 |
nwPacketBurstWriteTimeoutsPerSecPacket Burst Write Timeouts/sec is the rate the NetWare Service needs to retransmit a Burst Write Request because the NetWare server took too long to respond.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.14 |
nwPacketsReceivedPerSecPackets Received/sec is the rate at which the Redirector is receiving packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes received in a packet can be obtained by dividing Bytes Received/sec by this counter. Some packets received might not contain incoming data, for example an acknowledgment to a write made by the Redirector would count as an incoming packet.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.15 |
nwPacketsTransmittedPerSecPackets Transmitted/sec is the rate at which the Redirector is sending packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes transmitted in a packet can be obtained by dividing Bytes Transmitted/sec by this counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.16 |
nwPacketsPerSecPackets/sec is the rate the Redirector is processing data packets. One packet includes (hopefully) many bytes. We say hopefully here because each packet has protocol overhead. You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/packet. You can also divide this counter by Operations/sec to determine the average number of packets per operation, another measure of efficiency.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.17 |
nwReadOperationsRandomPerSecRead Operations Random/sec counts the rate at which, on a file-by-file basis, reads are made that are not sequential. If a read is made using a particular file handle, and then is followed by another read that is not immediately the contiguous next byte, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.18 |
nwReadPacketsPerSecRead Packets/sec is the rate at which read packets are being placed on the network. Each time a single packet is sent with a request to read data remotely, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.19 |
nwServerDisconnectsServer Disconnects counts the number of times a Server has disconnected your Redirector. See also Server Reconnects.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.20 |
nwServerReconnectsServer Reconnects counts the number of times your Redirector has had to reconnect to a server in order to complete a new active request. You can be disconnected by the Server if you remain inactive for too long. Locally even if all your remote files are closed, the Redirector will keep your connections intact for (nominally) ten minutes. Such inactive connections are called Dormant Connections. Reconnecting is expensive in time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.21 |
nwServerSessionsServer Sessions counts the total number of security objects the Redirector has managed. For example, a logon to a server followed by a network access to the same server will establish one connection, but two sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.22 |
nwWriteOperationsRandomPerSecWrite Operations Random/sec is the rate at which, on a file-by-file basis, writes are made that are not sequential. If a write is made using a particular file handle, and then is followed by another write that is not immediately the next contiguous byte, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.23 |
nwWritePacketsPerSecWrite Packets/sec is the rate at which writes are being sent to the network. Each time a single packet is sent with a request to write remote data, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.24.24 |
iasAccountingClientsTableThe IAS Accounting Clients performance object is installed by the Internet Authentication Service (IAS). IAS uses the Remote Authentication Dial-In User Service (RADIUS) protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage). SEQUENCE OF IASAccountingClientsEntry .1.3.6.1.4.1.9600.1.2.25 |
iasAccountingClientsEntryPerformance information for one particular instance of 'IAS Accounting Clients' object. IASAccountingClientsEntry .1.3.6.1.4.1.9600.1.2.25.1 |
iccInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.25.1.1 |
iccAccountingRequestsShows the number of packets received from this client on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.2 |
iccAccountingRequestsPerSecShows the rate, in seconds, at which packets were received from this client on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.3 |
iccAccountingResponsesShows the number of RADIUS Accounting-Response packets sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.4 |
iccAccountingResponsesPerSecShows the rate in seconds at which duplicate RADIUS Accounting-Request packets were received from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.5 |
iccBadAuthenticatorsShows the number of packets that contained invalid Signature attributes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.6 |
iccBadAuthenticatorsPerSecShows the rate, in seconds, at which packets that contained invalid Signature attributes were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.7 |
iccDroppedPacketsShows the number of incoming packets silently discarded for a reason other than being malformed, bad authenticators, or unknown types.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.8 |
iccDroppedPacketsPerSecShows the rate in seconds at which incoming packets were silently discarded for a reason other than being malformed, bad authenticators, or unknown types.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.9 |
iccDuplicateAccountingRequestsShows the number of duplicate RADIUS Accounting-Request packets received from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.10 |
iccDuplicateAccountingRqstPerSecShows the rate, in seconds, at which duplicate RADIUS Accounting-Request packets were received from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.11 |
iccMalformedPacketsShows the number of malformed packets received. Bad authenticators or unknown types are not included.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.12 |
iccMalformedPacketsPerSecShows the rate, in seconds, at which malformed packets were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.13 |
iccNoRecordShows the number of RADIUS Accounting-Request packets that were received and responded to but not recorded.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.14 |
iccNoRecordPerSecShows the rate, in seconds, at which RADIUS Accounting-Request packets were received and responded to but not recorded.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.15 |
iccPacketsReceivedShows the number of packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.16 |
iccPacketsReceivedPerSecShows the rate, in seconds, at which packets were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.17 |
iccPacketsSentShows the number of packets sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.18 |
iccPacketsSentPerSecShows the rate, in seconds, at which packets were sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.19 |
iccUnknownTypeShows the number of packets of unknown type that were received. An unknown type is a RADIUS packet that contains an unrecognized entry in the Code field, used to identify the packet type. Consequently IAS does not support packets of unknown type.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.20 |
iccUnknownTypePerSecShows the rate, in seconds, at which packets of unknown type were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.25.1.21 |
iasAccountingProxy OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.26 |
icpAccountingRequestsThe number of RADIUS Accounting-Request packets received on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.1 |
icpAccountingRequestsPerSecThe average number of RADIUS Accounting-Request packets sent per second to the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.2 |
icpAccountingResponsesThe number of RADIUS Accounting-Response packets received on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.3 |
icpAccountingResponsesPerSecThe average number of RADIUS Accounting-Response packets received per second on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.4 |
icpBadAuthenticatorsThe number of RADIUS packets that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.5 |
icpBadAuthenticatorsPerSecThe average number of RADIUS packets per second that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.6 |
icpDroppedPacketsThe number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.7 |
icpDroppedPacketsPerSecThe average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.8 |
icpInvalidAddressesThe number of packets received from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.9 |
icpInvalidAddressesPerSecThe average number of packets per second received from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.10 |
icpMalformedPacketsThe number of packets containing malformed data received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.11 |
icpMalformedPacketsPerSecThe average number of packets containing malformed data received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.12 |
icpPacketsReceivedThe number of packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.13 |
icpPacketsReceivedPerSecThe average number of packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.14 |
icpPendingRequestsThe number of requests destined for this server that have not yet timed out or received a response.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.15 |
icpRequestTimeoutsThe number of request timeouts to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.16 |
icpRequestTimeoutsPerSecThe average number of request timeouts per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.17 |
icpRetransmissionsThe number of requests retransmitted to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.18 |
icpRetransmissionsPerSecThe average number of requests retransmitted per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.19 |
icpUnknownTypeThe number of unknown type (non-RADIUS) packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.20 |
icpUnknownTypePerSecThe average number of unknown type (non-RADIUS) packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.26.21 |
iasAccountingServerThe IAS Accounting Server performance object is installed by the IAS. IAS uses the RADIUS protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage). OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.27 |
icsAccountingRequestsThe number of packets received from this client on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.1 |
icsAccountingRequestsPerSecThe number of packets per second received from this client on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.2 |
icsAccountingResponsesThe number of RADIUS Accounting-Response packets sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.3 |
icsAccountingResponsesPerSecThe number of RADIUS Accounting-Response packets per second sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.4 |
icsBadAuthenticatorsThe number of packets which contained invalid Signature attributes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.5 |
icsBadAuthenticatorsPerSecThe number of packets per second which contained invalid Signature attributes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.6 |
icsDroppedPacketsThe number of incoming packets silently discarded for a reason other than malformed, bad authenticators, or unknown types.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.7 |
icsDroppedPacketsPerSecThe number of incoming packets per second silently discarded for a reason other than malformed, bad authenticators, or unknown types.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.8 |
icsDuplicateAccountingRequestsThe number of duplicate RADIUS Accounting-Request packets received from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.9 |
icsDuplicateAccountingRqstPerSecThe number of duplicate RADIUS Accounting-Request packets per second received from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.10 |
icsInvalidRequestsThe number of packets received from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.11 |
icsInvalidRequestsPerSecThe number of packets received per second from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.12 |
icsMalformedPacketsThe number of malformed packets received. Bad authenticators or unknown types are not included.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.13 |
icsMalformedPacketsPerSecThe number of malformed packets per second received. Bad authenticators or unknown types are not included.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.14 |
icsNoRecordThe number of RADIUS Accounting-Request packets which were received and responded to but not recorded.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.15 |
icsNoRecordPerSecThe number of RADIUS Accounting-Request packets per second which were received and responded to but not recorded.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.16 |
icsPacketsReceivedThe number of packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.17 |
icsPacketsReceivedPerSecThe number of packets per second received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.18 |
icsPacketsSentThe number of packets sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.19 |
icsPacketsSentPerSecThe number of packets sent per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.20 |
icsServerResetTimeThe time elapsed (in hundredths of a second) since the server configuration was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.21 |
icsServerUpTimeThe time elapsed (in hundredths of a second) since the server process was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.22 |
icsUnknownTypeThe number of packets of unknown type which were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.23 |
icsUnknownTypePerSecThe number of packets per second of unknown type which were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.27.24 |
iasAuthenticationClientsTableThe IAS Authentication Clients performance object is installed by IAS. IAS uses the RADIUS protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage). SEQUENCE OF IASAuthenticationClientsEntry .1.3.6.1.4.1.9600.1.2.28 |
iasAuthenticationClientsEntryPerformance information for one particular instance of 'IAS Authentication Clients' object. IASAuthenticationClientsEntry .1.3.6.1.4.1.9600.1.2.28.1 |
iucInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.28.1.1 |
iucAccessAcceptsAccess-Acceptsro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.2 |
iucAccessAcceptsPerSecAccess-Accepts / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.3 |
iucAccessChallengesAccess-Challengesro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.4 |
iucAccessChallengesPerSecAccess-Challenges / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.5 |
iucAccessRejectsAccess-Rejectsro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.6 |
iucAccessRejectsPerSecAccess-Rejects / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.7 |
iucAccessRequestsAccess-Requestsro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.8 |
iucAccessRequestsPerSecAccess-Requests / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.9 |
iucBadAuthenticatorsBad Authenticatorsro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.10 |
iucBadAuthenticatorsPerSecBad Authenticators / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.11 |
iucDroppedPacketsDropped Packetsro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.12 |
iucDroppedPacketsPerSecDropped Packets / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.13 |
iucDuplicateAccessRequestsDuplicate Access-Requestsro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.14 |
iucDuplicateAccessRequestsPerSecDuplicate Access-Requests / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.15 |
iucMalformedPacketsMalformed Packetsro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.16 |
iucMalformedPacketsPerSecMalformed Packets / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.17 |
iucPacketsReceivedPackets Receivedro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.18 |
iucPacketsReceivedPerSecPackets Received / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.19 |
iucPacketsSentPackets Sentro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.20 |
iucPacketsSentPerSecPackets Sent / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.21 |
iucUnknownTypeUnknown Typero Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.22 |
iucUnknownTypePerSecUnknown Type / sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.28.1.23 |
iasAuthenticationProxy OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.29 |
iupAccessAcceptsThe number of RADIUS Access-Accept packets received from this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.1 |
iupAccessAcceptsPerSecThe average number of RADIUS Access-Accept packets per second received from this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.2 |
iupAccessChallengesThe number of RADIUS Access-Challenge packets received from this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.3 |
iupAccessChallengesPerSecThe average number of RADIUS Access-Challenge packets per second received from this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.4 |
iupAccessRejectsThe number of RADIUS Access-Reject packets received from this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.5 |
iupAccessRejectsPerSecThe average number of RADIUS Access-Reject packets per second received from this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.6 |
iupAccessRequestsThe number of RADIUS Access-Request packets sent to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.7 |
iupAccessRequestsPerSecThe average number of RADIUS Access-Request packets per second sent to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.8 |
iupBadAuthenticatorsThe number of RADIUS packets that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.9 |
iupBadAuthenticatorsPerSecThe average number of RADIUS packets per second that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.10 |
iupDroppedPacketsThe number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.11 |
iupDroppedPacketsPerSecThe average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.12 |
iupInvalidAddressesThe number of packets received from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.13 |
iupInvalidAddressesPerSecThe average number of packets per second received from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.14 |
iupMalformedPacketsThe number of packets containing malformed data received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.15 |
iupMalformedPacketsPerSecThe average number of packets containing malformed data received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.16 |
iupPacketsReceivedThe number of packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.17 |
iupPacketsReceivedPerSecThe average number of packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.18 |
iupPendingRequestsThe number of requests destined for this server that have not yet timed out or received a response.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.19 |
iupRequestTimeoutsThe number of request timeouts to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.20 |
iupRequestTimeoutsPerSecThe average number of request timeouts per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.21 |
iupRetransmissionsThe number of requests retransmitted to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.22 |
iupRetransmissionsPerSecThe average number of requests retransmitted per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.23 |
iupUnknownTypeThe number of unknown type (non-RADIUS) packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.24 |
iupUnknownTypePerSecThe average number of unknown type (non-RADIUS) packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.29.25 |
iasAuthenticationServerThe IAS Authentication Server performance object is installed by IAS. IAS uses the RADIUS protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage). OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.30 |
iusAccessAcceptsThe number of RADIUS Access-Accept packets sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.1 |
iusAccessAcceptsPerSecThe number of RADIUS Access-Accept packets per second sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.2 |
iusAccessChallengesThe number of RADIUS Access-Challenge packets sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.3 |
iusAccessChallengesPerSecThe number of RADIUS Access-Challenge packets per second sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.4 |
iusAccessRejectsThe number of RADIUS Access-Reject packets sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.5 |
iusAccessRejectsPerSecThe number of RADIUS Access-Reject packets per second sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.6 |
iusAccessRequestsThe number of packets received on the authentication port from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.7 |
iusAccessRequestsPerSecThe number of packets per second received on the authentication port from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.8 |
iusBadAuthenticatorsThe number of packets which contained invalid Signature attributes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.9 |
iusBadAuthenticatorsPerSecThe number of packets per second which contained invalid Signature attributes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.10 |
iusDroppedPacketsThe number of incoming packets silently discarded for a reason other than malformed, bad authenticators, or unknown types.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.11 |
iusDroppedPacketsPerSecThe number of incoming packets per second silently discarded for a reason other than malformed, bad authenticators, or unknown types.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.12 |
iusDuplicateAccessRequestsThe number of duplicate RADIUS Access-Request packets received from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.13 |
iusDuplicateAccessRequestsPerSecThe number of duplicate RADIUS Access-Request packets per second received from this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.14 |
iusInvalidRequestsThe number of packets received from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.15 |
iusInvalidRequestsPerSecThe number of packets received per second from unknown addresses.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.16 |
iusMalformedPacketsThe number of malformed packets received. Bad authenticators or unknown types are not included.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.17 |
iusMalformedPacketsPerSecThe number of malformed packets per second received. Bad authenticators or unknown types are not included.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.18 |
iusPacketsReceivedThe number of packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.19 |
iusPacketsReceivedPerSecThe number of packets per second received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.20 |
iusPacketsSentThe number of packets sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.21 |
iusPacketsSentPerSecThe number of packets sent per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.22 |
iusServerResetTimeThe time elapsed (in hundredths of a second) since the server configuration was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.23 |
iusServerUpTimeThe time elapsed (in hundredths of a second) since the server process was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.24 |
iusUnknownTypeThe number of packets of unknown type which were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.25 |
iusUnknownTypePerSecThe number of packets per second of unknown type which were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.30.26 |
iasRemoteAccountingServersTableA table containing performance information for instances of 'IAS Remote Accounting Servers' objects. SEQUENCE OF IASRemoteAccountingServersEntry .1.3.6.1.4.1.9600.1.2.31 |
iasRemoteAccountingServersEntryPerformance information for one particular instance of 'IAS Remote Accounting Servers' object. IASRemoteAccountingServersEntry .1.3.6.1.4.1.9600.1.2.31.1 |
ircsInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.31.1.1 |
ircsAccountingRequestsThe number of RADIUS Accounting-Request packets received on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.2 |
ircsAccountingRequestsPerSecThe average number of RADIUS Accounting-Requests received per second on the accounting port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.3 |
ircsAccountingResponsesThe number of RADIUS Accounting-Response packets sent from this IAS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.4 |
ircsAccountingResponsesPerSecThe average number of RADIUS Accounting-Responses sent per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.5 |
ircsBadAuthenticatorsThe number of RADIUS packets that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.6 |
ircsBadAuthenticatorsPerSecThe average number of RADIUS packets per second that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.7 |
ircsDroppedPacketsThe number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.8 |
ircsDroppedPacketsPerSecThe average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.9 |
ircsLastRoundTripTimeThe interval (in hundredths of a second) between the most recent request from a remote IAS server and its response.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.10 |
ircsMalformedPacketsThe number of packets containing malformed data received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.11 |
ircsMalformedPacketsPerSecThe average number of packets containing malformed data received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.12 |
ircsPacketsReceivedThe number of packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.13 |
ircsPacketsReceivedPerSecThe average number of packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.14 |
ircsPendingRequestsThe number of requests destined for this server that have not yet timed out or received a response.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.15 |
ircsPortNumberThe UDP port the proxy is using to send requests to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.16 |
ircsRequestTimeoutsThe number of request timeouts to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.17 |
ircsRequestTimeoutsPerSecThe average number of request timeouts per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.18 |
ircsRetransmissionsThe number of requests retransmitted to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.19 |
ircsRetransmissionsPerSecThe average number of requests retransmitted per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.20 |
ircsUnknownTypeThe number of unknown type (non-RADIUS) packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.21 |
ircsUnknownTypePerSecThe average number of unknown type (non-RADIUS) packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.31.1.22 |
iasRemoteAuthenticationSrvrTableA table containing performance information for instances of 'IAS Remote Authentication Servers' objects. SEQUENCE OF IASRemoteAuthenticationServers .1.3.6.1.4.1.9600.1.2.32 |
iasRemoteAuthenticationSrvrEntryPerformance information for one particular instance of 'IAS Remote Authentication Servers' object. IASRemoteAuthenticationServers .1.3.6.1.4.1.9600.1.2.32.1 |
irusInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.32.1.1 |
irusAccessAcceptsThe number of RADIUS Access-Accept packets sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.2 |
irusAccessAcceptsPerSecThe average number of RADIUS Access-Accept packets per second sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.3 |
irusAccessChallengesThe number of RADIUS Access-Challenge packets sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.4 |
irusAccessChallengesPerSecThe average number of RADIUS Access-Challenge packets per second sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.5 |
irusAccessRejectsThe number of RADIUS Access-Reject packets sent to this client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.6 |
irusAccessRejectsPerSecThe average number of RADIUS Access-Reject packets per second sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.7 |
irusAccessRequestsThe number of packets received on the authentication port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.8 |
irusAccessRequestsPerSecThe average number of packets per second received on the authentication port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.9 |
irusBadAuthenticatorsThe number of RADIUS packets that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.10 |
irusBadAuthenticatorsPerSecThe average number of RADIUS packets per second that contain an invalid Message Authenticator attribute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.11 |
irusDroppedPacketsThe number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.12 |
irusDroppedPacketsPerSecThe average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.13 |
irusLastRoundTripTimeThe interval (in hundredths of a second) between the most recent request from a remote IAS server and its response.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.14 |
irusMalformedPacketsThe number of packets containing malformed data received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.15 |
irusMalformedPacketsPerSecThe average number of packets containing malformed data received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.16 |
irusPacketsReceivedThe number of packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.17 |
irusPacketsReceivedPerSecThe average number of packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.18 |
irusPendingRequestsThe number of requests destined for this server that have not yet timed out or received a response.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.19 |
irusPortNumberThe UDP port the proxy is using to send requests to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.20 |
irusRequestTimeoutsThe number of request timeouts to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.21 |
irusRequestTimeoutsPerSecThe average number of request timeouts per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.22 |
irusRetransmissionsThe number of requests retransmitted to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.23 |
irusRetransmissionsPerSecThe average number of requests retransmitted per second to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.24 |
irusUnknownTypeThe number of unknown type (non-RADIUS) packets received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.25 |
irusUnknownTypePerSecThe average number of unknown type (non-RADIUS) packets received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.32.1.26 |
icmpV4The ICMP performance object consists of counters that measure the rates at which Internet Control Message Protocol (ICMP) messages are sent and received by using the ICMP protocol. It also includes counters that monitor ICMP protocol errors. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.33 |
icmpV4MessagesOutboundErrorsMessages Outbound Errors is the number of ICMP messages that this entity did not send due to problems discovered within ICMP such as lack of buffers. This value does not include errors discovered outside the ICMP layer, such as those recording the failure of IP to route the resultant datagram. In some implementations, none of the error types are included in the value of this counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.1 |
icmpV4MessagesReceivedErrorsMessages Received Errors is the number of ICMP messages that the entity received but determined as having errors (bad ICMP checksums, bad length, etc)..ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.2 |
icmpV4MessagesReceivedPerSecMessages Received/sec is the rate at which ICMP messages are received by the entity. The rate includes those messages received in error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.3 |
icmpV4MessagesSentPerSecMessages Sent/sec is the rate at which ICMP messages are attempted to be sent by the entity. The rate includes those messages sent in error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.4 |
icmpV4MessagesPerSecMessages/sec is the total rate at which ICMP messages are sent and received by the entity. The rate includes those messages received or sent in error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.5 |
icmpV4RcvdAddressMaskReceived Address Mask is the number of ICMP Address Mask Request messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.6 |
icmpV4RcvdAddressMaskReplyReceived Address Mask Reply is the number of ICMP Address Mask Reply messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.7 |
icmpV4RcvdDestUnreachableReceived Destination Unreachable is the number of ICMP Destination Unreachable messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.8 |
icmpV4RcvdEchoReplyPerSecReceived Echo Reply/sec is the rate of ICMP Echo Reply messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.9 |
icmpV4RcvdEchoPerSecReceived Echo/sec is the rate of ICMP Echo messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.10 |
icmpV4RcvdParameterProblemReceived Parameter Problem is the number of ICMP Parameter Problem messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.11 |
icmpV4RcvdRedirectPerSecReceived Redirect/sec is the rate of ICMP Redirect messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.12 |
icmpV4RcvdSourceQuenchReceived Source Quench is the number of ICMP Source Quench messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.13 |
icmpV4RcvdTimeExceededReceived Time Exceeded is the number of ICMP Time Exceeded messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.14 |
icmpV4RcvdTimestampReplyPerSecReceived Timestamp Reply/sec is the rate of ICMP Timestamp Reply messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.15 |
icmpV4RcvdTimestampPerSecReceived Timestamp/sec is the rate of ICMP Timestamp (request) messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.16 |
icmpV4SentAddressMaskSent Address Mask is the number of ICMP Address Mask Request messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.17 |
icmpV4SentAddressMaskReplySent Address Mask Reply is the number of ICMP Address Mask Reply messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.18 |
icmpV4SentDestinationUnreachableSent Destination Unreachable is the number of ICMP Destination Unreachable messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.19 |
icmpV4SentEchoReplyPerSecSent Echo Reply/sec is the rate of ICMP Echo Reply messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.20 |
icmpV4SentEchoPerSecSent Echo/sec is the rate of ICMP Echo messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.21 |
icmpV4SentParameterProblemSent Parameter Problem is the number of ICMP Parameter Problem messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.22 |
icmpV4SentRedirectPerSecSent Redirect/sec is the rate of ICMP Redirect messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.23 |
icmpV4SentSourceQuenchSent Source Quench is the number of ICMP Source Quench messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.24 |
icmpV4SentTimeExceededSent Time Exceeded is the number of ICMP Time Exceeded messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.25 |
icmpV4SentTimestampReplyPerSecSent Timestamp Reply/sec is the rate of ICMP Timestamp Reply messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.26 |
icmpV4SentTimestampPerSecSent Timestamp/sec is the rate of ICMP Timestamp (request) messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.33.27 |
icmpV6 OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.34 |
icmpV6MessagesOutboundErrorsMessages Outbound Errors is the number of ICMP messages that were not send due to problems within ICMP, such as lack of buffers. This value does not include errors discovered outside the ICMP layer, such as those recording the failure of IP to route the resultant datagram. In some implementations, none of the error types are included in the value of this counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.1 |
icmpV6MessagesReceivedErrorsMessages Received Errors is the number of ICMP messages that the entity received but had errors, such as bad ICMP checksums, bad length, etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.2 |
icmpV6MessagesReceivedPerSecMessages Received/sec is the rate, in incidents per second at which ICMP messages were received. The rate includes messages received in error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.3 |
icmpV6MessagesSentPerSecMessages Sent/sec is the rate, in incidents per second, at which the server attempted to send. The rate includes those messages sent in error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.4 |
icmpV6MessagesPerSecMessages/sec is the total rate, in incidents per second, at which ICMP messages were sent and received by the entity. The rate includes messages received or sent in error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.5 |
icmpV6ReceivedDestUnreachableReceived Destination Unreachable is the number of ICMP Destination Unreachable messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.6 |
icmpV6ReceivedEchoReplyPerSecReceived Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.7 |
icmpV6ReceivedEchoPerSecReceived Echo/sec is the rate, in incidents per second, at which ICMP Echo messages were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.8 |
icmpV6ReceivedMembershipQueryReceived Membership Query is the number of packets received thatquery their membership to a group.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.9 |
icmpV6ReceivedMembershipReductReceived Membership Reduction is the number of packets received thatcancelled their membership to a group.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.10 |
icmpV6ReceivedMembershipReportReceived Membership Report is the number of packets received thatreport their membership to a group.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.11 |
icmpV6ReceivedNeighborAdvertReceived Neighbor Advert is the number of packets received thatadvert a neighbor.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.12 |
icmpV6ReceivedNeighborSolicitReceived Neighbor Solicit is the number of packets received thatsolicit a neighbor.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.13 |
icmpV6ReceivedPacketTooBigReceived Packet Too Big is the number of received packets thatare larger than anticipated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.14 |
icmpV6ReceivedParameterProblemReceived Parameter Problem is the number of ICMP Parameter Problem messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.15 |
icmpV6ReceivedRedirectPerSecReceived Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.16 |
icmpV6ReceivedRouterAdvertReceived Router Advert is the number of packets received thatadvert the router.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.17 |
icmpV6ReceivedRouterSolicitReceived Router Solicit is the number of packets received thatsolicit the router.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.18 |
icmpV6ReceivedTimeExceededReceived Time Exceeded is the number of ICMP Time Exceeded messages received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.19 |
icmpV6SentDestinationUnreachableSent Destination Unreachable is the number of ICMP Destination Unreachable messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.20 |
icmpV6SentEchoReplyPerSecSent Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.21 |
icmpV6SentEchoPerSecSent Echo/sec is the rate of ICMP Echo messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.22 |
icmpV6SentMembershipQuerySent Membership Query is the number of packets sent thatquery their membership to a group.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.23 |
icmpV6SentMembershipReductionSent Membership Reduction is the number of packets sent thatcancelled their membership to a group.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.24 |
icmpV6SentMembershipReportSent Membership Report is the number of packets sent thatreport their membership to a group.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.25 |
icmpV6SentNeighborAdvertSent Neighbor Advert is the number of packets sent thatadvert a neighbor.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.26 |
icmpV6SentNeighborSolicitSent Neighbor Solicit is the number of packets sent thatsolicit a neighbor.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.27 |
icmpV6SentPacketTooBigSent Packet Too Big is the number of sent packets thatare larger than anticipated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.28 |
icmpV6SentParameterProblemSent Parameter Problem is the number of ICMP Parameter Problem messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.29 |
icmpV6SentRedirectPerSecSent Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.30 |
icmpV6SentRouterAdvertSent Router Advert is the number of packets sent thatadvert the router.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.31 |
icmpV6SentRouterSolicitSent Router Solicit is the number of packets sent thatsolicit the router.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.32 |
icmpV6SentTimeExceededSent Time Exceeded is the number of ICMP Time Exceeded messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.34.33 |
indexingServiceTableThe Indexing Service performance object counters report statistics pertaining to the creation of indexes and the merging and querying of indexes by Indexing Service. SEQUENCE OF IndexingServiceEntry .1.3.6.1.4.1.9600.1.2.35 |
indexingServiceEntryPerformance information for one particular instance of 'Indexing Service' object. IndexingServiceEntry .1.3.6.1.4.1.9600.1.2.35.1 |
idxSvcInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.35.1.1 |
idxSvcNumDocumentsIndexedNumber of documents indexed since the index was mounted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.2 |
idxSvcDeferredForIndexingNumber of files not available and deferred for indexing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.3 |
idxSvcFilesToBeIndexedNumber of files to be filtered and added to the index.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.4 |
idxSvcIndexSizeMBSize of the content index (*.ci files only) in megabytes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.5 |
idxSvcMergeProgressPercent merge complete for the current merge.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.6 |
idxSvcRunningQueriesNumber of active query client connections.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.7 |
idxSvcSavedIndexesNumber of saved indexes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.8 |
idxSvcTotalNumDocumentsTotal number of documents in the index.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.9 |
idxSvcTotalNumOfQueriesTotal number of queries since the index was mounted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.10 |
idxSvcUniqueKeysNumber of unique keys (words, etc.) in the index.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.11 |
idxSvcWordListsNumber of word lists.ro Gauge32 .1.3.6.1.4.1.9600.1.2.35.1.12 |
indexingServiceFilterTableThe Index Service Filter object monitors the filtering activity of Indexing Service. SEQUENCE OF IndexingServiceFilterEntry .1.3.6.1.4.1.9600.1.2.36 |
indexingServiceFilterEntryPerformance information for one particular instance of 'Indexing Service Filter' object. IndexingServiceFilterEntry .1.3.6.1.4.1.9600.1.2.36.1 |
idxSvcFilterInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.36.1.1 |
idxSvcFilterBindingTimeMsecAverage time spent binding to indexing filters.ro Gauge32 .1.3.6.1.4.1.9600.1.2.36.1.2 |
idxSvcFilterIdxSpeedMBPerHrSpeed of indexing contents of files in megabytes per hour.ro Gauge32 .1.3.6.1.4.1.9600.1.2.36.1.3 |
idxSvcFilterTotalIdxSpeedMBPerHrSpeed of indexing file contents and properties in megabytes per hour.ro Gauge32 .1.3.6.1.4.1.9600.1.2.36.1.4 |
internetInformationServicesGlobalThe Internet Information Services Global performance object consists of counters that apply jointly to the Hypertext Transport Protocol (HTTP) service and File Transfer Protocol (FTP) service. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.37 |
iisGlobalActiveFlushedEntriesActive Flushed Entries are cached file handles that will be closed when all current transfers complete.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.1 |
iisGlobalBLOBCacheFlushesBLOB Cache Flushes since server startup.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.2 |
iisGlobalBLOBCacheHitsTotal number of successful lookups in the BLOB cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.3 |
iisGlobalBLOBCacheHitsPercentThe ratio of BLOB Cache Hits to total cache requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.4 |
iisGlobalBLOBCacheMissesTotal number of unsuccessful lookups in the BLOB cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.5 |
iisGlobalCurBLOBsCachedBLOB information blocks currently in the cache for WWW and FTP services.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.6 |
iisGlobalCurBlockAsyncIORequestsCurrent requests temporarily blocked due to bandwidth throttling settings.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.7 |
iisGlobalCurFileCacheMemUsageCurrent number of bytes used for file cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.8 |
iisGlobalCurFilesCachedCurrent number of files whose content is in the cache for WWW and FTP services.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.9 |
iisGlobalCurURIsCachedURI information blocks currently in the cache for WWW and FTP services.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.10 |
iisGlobalFileCacheFlushesFile Cache Flushes since server startup.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.11 |
iisGlobalFileCacheHitsTotal number of successful lookups in the file cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.12 |
iisGlobalFileCacheHitsPercentThe ratio of File Cache Hits to total cache requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.13 |
iisGlobalFileCacheMissesTotal number of unsuccessful lookups in the file cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.14 |
iisGlobalMaxFileCacheMemUsageMaximum number of bytes used for file cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.15 |
iisGlobalMeasuredAsyncIOBwUsageMeasured bandwidth of asynchronous I/O averaged over a minute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.16 |
iisGlobalTotalAllowedAsyncIOReqsTotal requests allowed by bandwidth throttling settings (counted since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.17 |
iisGlobalTotalBLOBsCachedTotal number of BLOB information blocks ever added to the cache for WWW and FTP servicesro Gauge32 .1.3.6.1.4.1.9600.1.2.37.18 |
iisGlobalTotalBlockAsyncIOReqsTotal requests temporarily blocked due to bandwidth throttling settings (counted since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.19 |
iisGlobalTotalFilesCachedTotal number of files whose content was ever added to the cache for WWW and FTP servicesro Gauge32 .1.3.6.1.4.1.9600.1.2.37.20 |
iisGlobalTotalFlushedBLOBsTotal Flushed BLOBs is the number of BLOB information blocks that have been removed from the cache since service start up.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.21 |
iisGlobalTotalFlushedFilesTotal Flushed Files is the number of file handles that have been removed from the cache since service start up.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.22 |
iisGlobalTotalFlushedURIsTotal Flushed URIs is the number of URI information blocks that have been removed from the cache since service start up.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.23 |
iisGlobalTotalRejectedAsyncIOReqTotal requests rejected due to bandwidth throttling settings (counted since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.24 |
iisGlobalTotalURIsCachedTotal number of URI information blocks ever added to the cache for WWW and FTP servicesro Gauge32 .1.3.6.1.4.1.9600.1.2.37.25 |
iisGlobalURICacheFlushesURI Cache Flushes since server startup.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.26 |
iisGlobalURICacheHitsTotal number of successful lookups in the URI cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.27 |
iisGlobalURICacheHitsPercentThe ratio of URI Cache Hits to total cache requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.28 |
iisGlobalURICacheMissesTotal number of unsuccessful lookups in the URI cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.37.29 |
ipV4The Internet Protocol (IP) performance object includes counters that describe the rates at which IP datagrams are transmitted by a computer using the IP protocol. It also describes various error counts for the IP protocol. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.38 |
ipV4DatagramsForwardedPerSecDatagrams Forwarded/sec is the rate, in incidents per second, at which attemps were made to find routes to forward input datagrams their final destination, because the local server was not the final IP destination. In servers that do not act as IP Gateways, this rate includes only packets that were source-routed via this entity, where the source-route option processing was successful.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.1 |
ipV4DatagramsOutboundDiscardedDatagrams Outbound Discarded is the number of output IP datagrams that were discarded even though no problems were encountered to prevent their transmission to their destination (for example, lack of buffer space). This counter includes datagrams counted in Datagrams Forwarded/sec that meet this criterion.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.2 |
ipV4DatagramsOutboundNoRouteDatagrams Outbound No Route is the number of IP datagrams that were discarded because no route could be found to transmit them to their destination. This counter includes any packets counted in Datagrams Forwarded/sec that meet this `no route' criterion.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.3 |
ipV4DatagramsRcvdAddressErrorsDatagrams Received Address Errors is the number of input datagrams that were discarded because the IP address in their IP header destination field was not valid for the computer. This count includes invalid addresses (for example, 0.0. 0.0) and addresses of unsupported Classes (for example, Class E). For entities that are not IP gateways and do not forward datagrams, this counter includes datagrams that were discarded because the destination address was not a local address.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.4 |
ipV4DatagramsRcvdDeliveredPerSecDatagrams Received Delivered/sec is the rate, in incidents per second, at which input datagrams were successfully delivered to IP user-protocols, including Internet Control Message Protocol (ICMP).ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.5 |
ipV4DatagramsRcvdDiscardedDatagrams Received Discarded is the number of input IP datagrams that were discarded even though problems prevented their continued processing (for example, lack of buffer space). This counter does not include any datagrams discarded while awaiting re-assembly.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.6 |
ipV4DatagramsRcvdHeaderErrorsDatagrams Received Header Errors is the number of input datagrams that were discarded due to errors in the IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.7 |
ipV4DatagramsRcvdUnknownProtocolDatagrams Received Unknown Protocol is the number of locally-addressed datagrams that were successfully received but were discarded because of an unknown or unsupported protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.8 |
ipV4DatagramsRcvdPerSecDatagrams Received/sec is the rate, in incidents per second, at which IP datagrams are received from the interfaces, including those in error. Datagrams Received/sec is a subset of Datagrams/sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.9 |
ipV4DatagramsSentPerSecDatagrams Sent/sec is the rate, in incidents per second, at which IP datagrams were supplied for transmission by local IP user-protocols (including ICMP). This counter does not include any datagrams counted in Datagrams Forwarded/sec. Datagrams Sent/sec is a subset of Datagrams/sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.10 |
ipV4DatagramsPerSecDatagrams/sec is the rate, in incidents per second, at which IP datagrams were received from or sent to the interfaces, including those in error. Forwarded datagrams are not included in this rate.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.11 |
ipV4FragmentReassemblyFailuresFragment Re-assembly Failures is the number of failures detected by the IP reassembly algorithm, such as time outs, errors, etc. This is not necessarily a count of discarded IP fragments since some algorithms (notably RFC 815) lose track of the number of fragments by combining them as they are received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.12 |
ipV4FragmentationFailuresFragmentation Failures is the number of IP datagrams that were discarded because they needed to be fragmented at but could not be (for example, because the `Don't Fragment' flag was set).ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.13 |
ipV4FragmentedDatagramsPerSecFragmented Datagrams/sec is the rate, in incidents per second, at which datagrams are successfully fragmented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.14 |
ipV4FragmentsCreatedPerSecFragments Created/sec is the rate, in incidents per second, at which IP datagram fragments were generated as a result of fragmentation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.15 |
ipV4FragmentsReassembledPerSecFragments Re-assembled/sec is the rate, in incidents per second, at which IP fragments were successfully reassembled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.16 |
ipV4FragmentsRcvdPerSecFragments Received/sec is the rate, in incidents per second, at which IP fragments that need to be reassembled at this entity are received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.38.17 |
ipV6 OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.39 |
ipV6DatagramsForwardedPerSecDatagrams Forwarded/sec is the rate, in incidents per second, at which attemps were made to find routes to forward input datagrams their final destination, because the local server was not the final IP destination. In servers that do not act as IP Gateways, this rate includes only packets that were source-routed via this entity, where the source-route option processing was successful.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.1 |
ipV6DatagramsOutboundDiscardedDatagrams Outbound Discarded is the number of output IP datagrams that were discarded even though no problems were encountered to prevent their transmission to their destination (for example, lack of buffer space). This counter includes datagrams counted in Datagrams Forwarded/sec that meet this criterion.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.2 |
ipV6DatagramsOutboundNoRouteDatagrams Outbound No Route is the number of IP datagrams that were discarded because no route could be found to transmit them to their destination. This counter includes any packets counted in Datagrams Forwarded/sec that meet this `no route' criterion.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.3 |
ipV6DatagramsRcvdAddressErrorsDatagrams Received Address Errors is the number of input datagrams that were discarded because the IP address in their IP header destination field was not valid for the computer. This count includes invalid addresses (for example, 0.0. 0.0) and addresses of unsupported Classes (for example, Class E). For entities that are not IP gateways and do not forward datagrams, this counter includes datagrams that were discarded because the destination address was not a local address.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.4 |
ipV6DatagramsRcvdDeliveredPerSecDatagrams Received Delivered/sec is the rate, in incidents per second, at which input datagrams were successfully delivered to IP user-protocols, including Internet Control Message Protocol (ICMP).ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.5 |
ipV6DatagramsRcvdDiscardedDatagrams Received Discarded is the number of input IP datagrams that were discarded even though problems prevented their continued processing (for example, lack of buffer space). This counter does not include any datagrams discarded while awaiting re-assembly.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.6 |
ipV6DatagramsRcvdHeaderErrorsDatagrams Received Header Errors is the number of input datagrams that were discarded due to errors in the IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.7 |
ipV6DatagramsRcvdUnknownProtocolDatagrams Received Unknown Protocol is the number of locally-addressed datagrams that were successfully received but were discarded because of an unknown or unsupported protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.8 |
ipV6DatagramsRcvdPerSecDatagrams Received/sec is the rate, in incidents per second, at which IP datagrams are received from the interfaces, including those in error. Datagrams Received/sec is a subset of Datagrams/sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.9 |
ipV6DatagramsSentPerSecDatagrams Sent/sec is the rate, in incidents per second, at which IP datagrams were supplied for transmission by local IP user-protocols (including ICMP). This counter does not include any datagrams counted in Datagrams Forwarded/sec. Datagrams Sent/sec is a subset of Datagrams/sec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.10 |
ipV6DatagramsPerSecDatagrams/sec is the rate, in incidents per second, at which IP datagrams were received from or sent to the interfaces, including those in error. Forwarded datagrams are not included in this rate.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.11 |
ipV6FragmentReassemblyFailuresFragment Re-assembly Failures is the number of failures detected by the IP reassembly algorithm, such as time outs, errors, etc. This is not necessarily a count of discarded IP fragments since some algorithms (notably RFC 815) lose track of the number of fragments by combining them as they are received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.12 |
ipV6FragmentationFailuresFragmentation Failures is the number of IP datagrams that were discarded because they needed to be fragmented at but could not be (for example, because the `Don't Fragment' flag was set).ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.13 |
ipV6FragmentedDatagramsPerSecFragmented Datagrams/sec is the rate, in incidents per second, at which datagrams are successfully fragmented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.14 |
ipV6FragmentsCreatedPerSecFragments Created/sec is the rate, in incidents per second, at which IP datagram fragments were generated as a result of fragmentation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.15 |
ipV6FragmentsReassembledPerSecFragments Re-assembled/sec is the rate, in incidents per second, at which IP fragments were successfully reassembled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.16 |
ipV6FragmentsRcvdPerSecFragments Received/sec is the rate, in incidents per second, at which IP fragments that need to be reassembled at this entity are received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.39.17 |
ipSecV4Driver OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.40 |
is4dActiveSecurityAssociationsThe number of active IPSec quick mode security associations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.1 |
is4dOffloadedSecurityAssociationThe number of active IPSec quick mode security associations offloaded to hardware. Certain network adapters can accelerate IPSec processing by performing hardware offload of IPSec cryptographic functions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.2 |
is4dPendingKeyExchangeOperationsThe number of IPSec key exchange operations that are in progress but are not yet completed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.3 |
is4dTotalBadSPIPacketsThe total number of packets for which the Security Parameters Index (SPI) was incorrect since the computer was last started. A large number of packets with bad SPIs within a short amount of time might indicate a packet spoofing attack.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.4 |
is4dTotalBytesReceivedInTunnelsThe total number of bytes received using IPSec tunnel mode since the computer was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.5 |
is4dTotalBytesSentInTunnelsThe total number of bytes sent using IPSec tunnel mode since the computer was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.6 |
is4dTotalOffloadedBytesReceivedThe total number of bytes received using IPSec hardware offload since the computer was last started. Certain network adapters can accelerate IPSec processing by performing hardware offload of IPSec cryptographic functions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.7 |
is4dTotalOffloadedBytesSentThe total number of bytes sent using IPSec hardware offload since the computer was last started. Certain network adapters can accelerate IPSec processing by performing hardware offload of IPSec cryptographic functions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.8 |
is4dTotalPktsFailReplayDetectionThe total number of packets that contained an invalid sequence number since the computer was last started. Increases in this counter might indicate a network problem or replay attack.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.9 |
is4dTotalPktsNotAuthenticatedThe total number of packets for which data could not be verified (for which the integrity hash verification failed) since the computer was last started. Increases in this counter might indicate an IPSec packet spoofing or modification attack, or packet corruption by network devices.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.10 |
is4dTotalPktsNotDecryptedThe total number of packets that could not be decrypted since the computer was last started. A packet might not be decrypted if it fails a validation check.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.11 |
is4dTotalSARekeysThe total number of successful rekey operations for IPSec quick mode security associations since the computer was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.12 |
is4dTotalTransportBytesReceivedThe total number of bytes received using IPSec transport mode since the computer was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.13 |
is4dTotalTransportBytesSentThe total number of bytes sent using IPSec transport mode since the computer was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.40.14 |
ipSecV4IKE OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.41 |
is4iAcquireHeapSizeThe number of entries in the acquire heap. The acquire heap stores successful acquires. Acquires are outbound requests to establish security associations between IPSec peers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.1 |
is4iMainModeSAListEntriesThe number of main mode state entries. This counter includes successfully negotiated main modes, main mode negotiations in progress, and main mode negotiations that failed or expired and have not yet been deleted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.2 |
is4iQuickModeSAListEntriesThe number of quick mode negotiations that are in progress.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.3 |
is4iReceiveHeapSizeThe number of entries in the Internet Key Exchange (IKE) receive buffers. The receive buffers are used to store incoming IKE messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.4 |
is4iTotalAuthenticationFailuresThe total number of identity authentication (Kerberos, certificate, and preshared key) failures that occurred during main mode negotiation since the IPSec service was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.5 |
is4iTotalMainModeSAsThe total number of successful security associations created during main mode negotiations since the IPSec service was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.6 |
is4iTotalNegotiationFailuresThe total number of negotiation failures that occurred during main mode or quick mode negotiation since the IPSec service was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.7 |
is4iTotalQuickModeSAsThe total number of successful security associations created during quick mode negotiations since the IPSec service was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.8 |
is4iTotalSoftAssociationsThe total number of security associations (SAs) formed with computers that did not respond to main mode negotiation attempts (though IPSec policy allowed communications) since the IPSec service was last started. Packets that match soft SAs are not secured by IPSec.ro Gauge32 .1.3.6.1.4.1.9600.1.2.41.9 |
jobObjectTableThe Job performance object reports the accounting and processor usage data collected by each active job object. A job object provides a means of managing groups of processes with respect to their processor usage and other factors. For more information about creating and managing job objects, see the Platform SDK link on the Web Resources page at http://windows.microsoft.com/windows2000/reskit /webresources. SEQUENCE OF JobObjectEntry .1.3.6.1.4.1.9600.1.2.42 |
jobObjectEntryPerformance information for one particular instance of 'Job Object' object. JobObjectEntry .1.3.6.1.4.1.9600.1.2.42.1 |
joInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.42.1.1 |
joCurrentPercentKernelModeTimeCurrent % Kernel mode Time shows the percentage of the sample interval that the processes in the Job object spent executing code in kernel or privileged mode.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.2 |
joCurrentPercentProcessorTimeCurrent % Processor Time shows the percentage of the sample interval that the processes in the Job object spent executing code.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.3 |
joCurrentPercentUserModeTimeCurrent % User mode Time shows the percentage of the sample interval that the processes in the Job object spent executing code in user mode.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.4 |
joPagesPerSecPages/Sec shows the page fault rate of all the processes in the Job object.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.5 |
joProcessCountActiveProcess Count - Active shows the number of processes that are currently associated with the Job object.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.6 |
joProcessCountTerminatedProcess Count - Terminated shows the number of processes that have been terminated because of a limit violation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.7 |
joProcessCountTotalProcess Count - Total shows the number of processes, both active and terminated, that are or have been associated with the Job object.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.8 |
joThisPeriodMSecKernelModeThis Period mSec - Kernel mode shows the time, in milliseconds, of kernel mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.9 |
joThisPeriodMSecProcessorThis Period mSec - Processor shows the time, in milliseconds, of processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.10 |
joThisPeriodMSecUserModeThis Period mSec - User mode shows the time, in milliseconds, of user mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.11 |
joTotalMSecKernelModeTotal mSec - Kernel mode shows the time, in milliseconds, of kernel mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.12 |
joTotalMSecProcessorTotal mSec - Processor shows the time, in milliseconds, of processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.13 |
joTotalMSecUserModeTotal mSec - User mode shows the time, in milliseconds, of user mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created.ro Gauge32 .1.3.6.1.4.1.9600.1.2.42.1.14 |
jobObjectDetailsTableThe Job Object Details performance object counters show detailed performance information about the active processes that make up a job object. SEQUENCE OF JobObjectDetailsEntry .1.3.6.1.4.1.9600.1.2.43 |
jobObjectDetailsEntryPerformance information for one particular instance of 'Job Object Details' object. JobObjectDetailsEntry .1.3.6.1.4.1.9600.1.2.43.1 |
jodInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.43.1.1 |
jodPercentPrivilegedTime% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service is called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.2 |
jodPercentProcessorTime% Processor Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.3 |
jodPercentUserTime% User Time is the percentage of elapsed time that the process threads spent executing code in user mode. Applications, environment subsystems, and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows executive, kernel, and device drivers. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.4 |
jodCreatingProcessIDThe Creating Process ID value is the Process ID of the process that created the process. The creating process may have terminated, so this value may no longer identify a running process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.5 |
jodElapsedTimeThe total elapsed time, in seconds, that this process has been running.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.6 |
jodHandleCountThe total number of handles currently open by this process. This number is equal to the sum of the handles currently open by each thread in this process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.7 |
jodIDProcessID Process is the unique identifier of this process. ID Process numbers are reused, so they only identify a process for the lifetime of that process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.8 |
jodIODataBytesPerSecThe rate at which the process is reading and writing bytes in I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.9 |
jodIODataOperationsPerSecThe rate at which the process is issuing read and write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.10 |
jodIOOtherBytesPerSecThe rate at which the process is issuing bytes to I/O operations that do not involve data such as control operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.11 |
jodIOOtherOperationsPerSecThe rate at which the process is issuing I/O operations that are neither read nor write operations (for example, a control function). This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.12 |
jodIOReadBytesPerSecThe rate at which the process is reading bytes from I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.13 |
jodIOReadOperationsPerSecThe rate at which the process is issuing read I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.14 |
jodIOWriteBytesPerSecThe rate at which the process is writing bytes to I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.15 |
jodIOWriteOperationsPerSecThe rate at which the process is issuing write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.16 |
jodPageFaultsPerSecPage Faults/sec is the rate at which page faults by the threads executing in this process are occurring. A page fault occurs when a thread refers to a virtual memory page that is not in its working set in main memory. This may not cause the page to be fetched from disk if it is on the standby list and hence already in main memory, or if it is in use by another process with whom the page is shared.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.17 |
jodPageFileBytesPage File Bytes is the current number of bytes that this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.18 |
jodPageFileBytesPeakPage File Bytes Peak is the maximum number of bytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.19 |
jodPoolNonpagedBytesPool Nonpaged Bytes is the size, in bytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged Bytes is calculated differently than Process\\Pool Nonpaged Bytes, so it might not equal Process\\Pool Nonpaged Bytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.20 |
jodPoolPagedBytesPool Paged Bytes is the size, in bytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged Bytes is calculated differently than Process\\Pool Paged Bytes, so it might not equal Process\\Pool Paged Bytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.21 |
jodPriorityBaseThe current base priority of this process. Threads within a process can raise and lower their own base priority relative to the process' base priority.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.22 |
jodPrivateBytesPrivate Bytes is the current size, in bytes, of memory that this process has allocated that cannot be shared with other processes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.23 |
jodThreadCountThe number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.24 |
jodVirtualBytesVirtual Bytes is the current size, in bytes, of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and the process can limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.25 |
jodVirtualBytesPeakVirtual Bytes Peak is the maximum size, in bytes, of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. However, virtual space is finite, and the process might limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.26 |
jodWorkingSetWorking Set is the current size, in bytes, of the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before leaving main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.27 |
jodWorkingSetPeakWorking Set Peak is the maximum size, in bytes, of the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.43.1.28 |
logicalDiskTableThe Logical Disk performance object consists of counters that monitor logical partitions of hard or fixed disk drives. System Monitor identifies logical disks by their drive letter, such as 'C.' To monitor Logical Disk object counters, you must activate them by typing the following at the command prompt: diskperf -yv SEQUENCE OF LogicalDiskEntry .1.3.6.1.4.1.9600.1.2.44 |
logicalDiskEntryPerformance information for one particular instance of 'LogicalDisk' object. LogicalDiskEntry .1.3.6.1.4.1.9600.1.2.44.1 |
lDiskInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.44.1.1 |
lDiskPercentDiskReadTime% Disk Read Time is the percentage of elapsed time that the selected disk drive was busy servicing read requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.2 |
lDiskPercentDiskTime% Disk Time is the percentage of elapsed time that the selected disk drive was busy servicing read or write requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.3 |
lDiskPercentDiskWriteTime% Disk Write Time is the percentage of elapsed time that the selected disk drive was busy servicing write requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.4 |
lDiskPercentFreeSpace% Free Space is the percentage of total usable space on the selected logical disk drive that was free.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.5 |
lDiskPercentIdleTime% Idle Time reports the percentage of time during the sample interval that the disk was idle.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.6 |
lDiskAvgDiskBytesPerReadAvg. Disk Bytes/Read is the average number of bytes transferred from the disk during read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.7 |
lDiskAvgDiskBytesPerTransferAvg. Disk Bytes/Transfer is the average number of bytes transferred to or from the disk during write or read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.8 |
lDiskAvgDiskBytesPerWriteAvg. Disk Bytes/Write is the average number of bytes transferred to the disk during write operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.9 |
lDiskAvgDiskQueueLengthAvg. Disk Queue Length is the average number of both read and write requests that were queued for the selected disk during the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.10 |
lDiskAvgDiskReadQueueLengthAvg. Disk Read Queue Length is the average number of read requests that were queued for the selected disk during the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.11 |
lDiskAvgDiskWriteQueueLengthAvg. Disk Write Queue Length is the average number of write requests that were queued for the selected disk during the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.12 |
lDiskAvgDiskSecPerReadAvg. Disk sec/Read is the average time, in seconds, of a read of data from the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.13 |
lDiskAvgDiskSecPerTransferAvg. Disk sec/Transfer is the time, in seconds, of the average disk transfer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.14 |
lDiskAvgDiskSecPerWriteAvg. Disk sec/Write is the average time, in seconds, of a write of data to the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.15 |
lDiskCurrentDiskQueueLengthCurrent Disk Queue Length is the number of requests outstanding on the disk at the time the performance data is collected. It also includes requests in service at the time of the collection. This is a instantaneous snapshot, not an average over the time iro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.16 |
lDiskDiskBytesPerSecDisk Bytes/sec is the rate bytes are transferred to or from the disk during write or read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.17 |
lDiskDiskReadBytesPerSecDisk Read Bytes/sec is the rate at which bytes are transferred from the disk during read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.18 |
lDiskDiskReadsPerSecDisk Reads/sec is the rate of read operations on the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.19 |
lDiskDiskTransfersPerSecDisk Transfers/sec is the rate of read and write operations on the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.20 |
lDiskDiskWriteBytesPerSecDisk Write Bytes/sec is rate at which bytes are transferred to the disk during write operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.21 |
lDiskDiskWritesPerSecDisk Writes/sec is the rate of write operations on the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.22 |
lDiskFreeMegabytesFree Megabytes displays the unallocated space, in megabytes, on the disk drive in megabytes. One megabyte is equal to 1,048,576 bytes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.23 |
lDiskSplitIOPerSecSplit IO/Sec reports the rate at which I/Os to the disk were split into multiple I/Os. A split I/O may result from requesting data of a size that is too large to fit into a single I/O or that the disk is fragmented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.44.1.24 |
macFileServerThe MacFile Server performance object provides information about a system running File Server for Macintosh. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.45 |
mfsCurrentFilesOpenThe number of internal files currently open in the MacFile server. This count does not include files opened on behalf of Macintosh clients.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.1 |
mfsCurrentNonPagedMemoryThe current amount of nonpaged memory resources used by the MacFile Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.2 |
mfsCurrentPagedMemoryThe current amount of paged memory resources used by the MacFile Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.3 |
mfsCurrentQueueLengthThe number of outstanding work items waiting to be processed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.4 |
mfsCurrentSessionsThe number of sessions currently connected to the MacFile server. Indicates current server activity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.5 |
mfsCurrentThreadsThe current number of threads used by MacFile server. Indicates how busy the server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.6 |
mfsDataReadPerSecThe number of bytes read from disk per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.7 |
mfsDataReceivedPerSecThe number of bytes received from the network per second. Indicates how busy the server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.8 |
mfsDataTransmittedPerSecThe number of bytes sent on the network per second. Indicates how busy the server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.9 |
mfsDataWrittenPerSecThe number of bytes written to disk per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.10 |
mfsFailedLogonsThe number of failed logon attempts to the MacFile server. Can indicate whether password guessing programs are being used to crack the security on the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.11 |
mfsMaxNonPagedMemoryThe maximum amount of nonpaged memory resources use by the MacFile Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.12 |
mfsMaxPagedMemoryThe maximum amount of paged memory resources used by the MacFile Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.13 |
mfsMaximumFilesOpenThe maximum number of internal files open at one time in the MacFile server. This count does not include files opened on behalf of Macintosh clients.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.14 |
mfsMaximumQueueLengthThe maximum number of outstanding work items waiting at one time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.15 |
mfsMaximumSessionsThe maximum number of sessions connected at one time to the MacFile server. Indicates usage level of server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.16 |
mfsMaximumThreadsThe maximum number of threads used by MacFile server. Indicates peak usage level of server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.45.17 |
memoryThe Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random-access memory (RAM) on the computer. Virtual memory consists of space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.46 |
memoryPercentCommittedBytesInUse% Committed Bytes In Use is the ratio of Memory\\Committed Bytes to the Memory\\Commit Limit. Committed memory is the physical memory in use for which space has been reserved in the paging file should it need to be written to disk. The commit limit is determined by the size of the paging file. If the paging file is enlarged, the commit limit increases, and the ratio is reduced). This counter displays the current percentage value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.1 |
memoryAvailableBytesAvailable Bytes is the amount of physical memory, in bytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.2 |
memoryAvailableKBytesAvailable KBytes is the amount of physical memory, in Kilobytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.3 |
memoryAvailableMBytesAvailable MBytes is the amount of physical memory, in Megabytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.4 |
memoryCacheBytesCache Bytes is the sum of the Memory\\System Cache Resident Bytes, Memory\\System Driver Resident Bytes, Memory\\System Code Resident Bytes, and Memory\\Pool Paged Resident Bytes counters. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.5 |
memoryCacheBytesPeakCache Bytes Peak is the maximum number of bytes used by the file system cache since the system was last restarted. This might be larger than the current size of the cache. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.6 |
memoryCacheFaultsPerSecCache Faults/sec is the rate at which faults occur when a page sought in the file system cache is not found and must be retrieved from elsewhere in memory (a soft fault) or from disk (a hard fault). The file system cache is an area of physical memory that stores recently used pages of data for applications. Cache activity is a reliable indicator of most application I/O operations. This counter shows the number of faults, without regard for the number of pages faulted in each operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.7 |
memoryCommitLimitCommit Limit is the amount of virtual memory that can be committed without having to extend the paging file(s). It is measured in bytes. Committed memory is the physical memory which has space reserved on the disk paging files. There can be one paging file on each logical drive). If the paging file(s) are be expanded, this limit increases accordingly. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.8 |
memoryCommittedBytesCommitted Bytes is the amount of committed virtual memory, in bytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.9 |
memoryDemandZeroFaultsPerSecDemand Zero Faults/sec is the rate at which a zeroed page is required to satisfy the fault. Zeroed pages, pages emptied of previously stored data and filled with zeros, are a security feature of Windows that prevent processes from seeing data stored by earlier processes that used the memory space. Windows maintains a list of zeroed pages to accelerate this process. This counter shows the number of faults, without regard to the number of pages retrieved to satisfy the fault. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.10 |
memoryFreeSystemPageTableEntriesFree System Page Table Entries is the number of page table entries not currently in used by the system. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.11 |
memoryPageFaultsPerSecPage Faults/sec is the average number of pages faulted per second. It is measured in number of pages faulted per second because only one page is faulted in each fault operation, hence this is also equal to the number of page fault operations. This counter includes both hard faults (those that require disk access) and soft faults (where the faulted page is found elsewhere in physical memory.) Most processors can handle large numbers of soft faults without significant consequence. However, hard faults, which require disk access, can cause significant delays.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.12 |
memoryPageReadsPerSecPage Reads/sec is the rate at which the disk was read to resolve hard page faults. It shows the number of reads operations, without regard to the number of pages retrieved in each operation. Hard page faults occur when a process references a page in virtual memory that is not in working set or elsewhere in physical memory, and must be retrieved from disk. This counter is a primary indicator of the kinds of faults that cause system-wide delays. It includes read operations to satisfy faults in the file system cache (usually requested by applications) and in non-cached mapped memory files. Compare the value of Memory\\Pages Reads/sec to the value of Memory\\Pages Input/sec to determine the average number of pages read during each operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.13 |
memoryPageWritesPerSecPage Writes/sec is the rate at which pages are written to disk to free up space in physical memory. Pages are written to disk only if they are changed while in physical memory, so they are likely to hold data, not code. This counter shows write operations, without regard to the number of pages written in each operation. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.14 |
memoryPagesInputPerSecPages Input/sec is the rate at which pages are read from disk to resolve hard page faults. Hard page faults occur when a process refers to a page in virtual memory that is not in its working set or elsewhere in physical memory, and must be retrieved from disk. When a page is faulted, the system tries to read multiple contiguous pages into memory to maximize the benefit of the read operation. Compare the value of Memory\\Pages Input/sec to the value of Memory\\Page Reads/sec to determine the average number of pages read into memory during each read operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.15 |
memoryPagesOutputPerSecPages Output/sec is the rate at which pages are written to disk to free up space in physical memory. Pages are written back to disk only if they are changed in physical memory, so they are likely to hold data, not code. A high rate of pages output might indicate a memory shortage. Windows writes more pages back to disk to free up space when physical memory is in short supply. This counter shows the number of pages, and can be compared to other counts of pages, without conversion.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.16 |
memoryPagesPerSecPages/sec is the rate at which pages are read from or written to disk to resolve hard page faults. This counter is a primary indicator of the kinds of faults that cause system-wide delays. It is the sum of Memory\\Pages Input/sec and Memory\\Pages Output/sec. It is counted in numbers of pages, so it can be compared to other counts of pages, such as Memory\\Page Faults/sec, without conversion. It includes pages retrieved to satisfy faults in the file system cache (usually requested by applications) non-cached mapped memory files.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.17 |
memoryPoolNonpagedAllocsPool Nonpaged Allocs is the number of calls to allocate space in the nonpaged pool. The nonpaged pool is an area of system memory area for objects that cannot be written to disk, and must remain in physical memory as long as they are allocated. It is measured in numbers of calls to allocate space, regardless of the amount of space allocated in each call. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.18 |
memoryPoolNonpagedBytesPool Nonpaged Bytes is the size, in bytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged Bytes is calculated differently than Process\\Pool Nonpaged Bytes, so it might not equal Process\\Pool Nonpaged Bytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.19 |
memoryPoolPagedAllocsPool Paged Allocs is the number of calls to allocate space in the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. It is measured in numbers of calls to allocate space, regardless of the amount of space allocated in each call. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.20 |
memoryPoolPagedBytesPool Paged Bytes is the size, in bytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged Bytes is calculated differently than Process\\Pool Paged Bytes, so it might not equal Process\\Pool Paged Bytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.21 |
memoryPoolPagedResidentBytesPool Paged Resident Bytes is the current size, in bytes, of the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Space used by the paged and nonpaged pools are taken from physical memory, so a pool that is too large denies memory space to processes. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.22 |
memorySystemCacheResidentBytesSystem Cache Resident Bytes is the size, in bytes, of the pageable operating system code in the file system cache. This value includes only current physical pages and does not include any virtual memory pages not currently resident. It does equal the System Cache value shown in Task Manager. As a result, this value may be smaller than the actual amount of virtual memory in use by the file system cache. This value is a component of Memory\\System Code Resident Bytes which represents all pageable operating system code that is currently in physical memory. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.23 |
memorySystemCodeResidentBytesSystem Code Resident Bytes is the size, in bytes of the operating system code currently in physical memory that can be written to disk when not in use. This value is a component of Memory\\System Code Total Bytes, which also includes operating system code on disk. Memory\\System Code Resident Bytes (and Memory\\System Code Total Bytes) does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.24 |
memorySystemCodeTotalBytesSystem Code Total Bytes is the size, in bytes, of the pageable operating system code currently in virtual memory. It is a measure of the amount of physical memory being used by the operating system that can be written to disk when not in use. This value is calculated by summing the bytes in Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems loaded by Ntldr/osloader. This counter does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.25 |
memorySystemDriverResidentBytesSystem Driver Resident Bytes is the size, in bytes, of the pageable physical memory being used by device drivers. It is the working set (physical memory area) of the drivers. This value is a component of Memory\\System Driver Total Bytes, which also includes driver memory that has been written to disk. Neither Memory\\System Driver Resident Bytes nor Memory\\System Driver Total Bytes includes memory that cannot be written to disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.26 |
memorySystemDriverTotalBytesSystem Driver Total Bytes is the size, in bytes, of the pageable virtual memory currently being used by device drivers. Pageable memory can be written to disk when it is not being used. It includes physical memory (Memory\\System Driver Resident Bytes) and code and data paged to disk. It is a component of Memory\\System Code Total Bytes. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.27 |
memoryTranFaultsPerSecTransition Faults/sec is the rate at which page faults are resolved by recovering pages that were being used by another process sharing the page, or were on the modified page list or the standby list, or were being written to disk at the time of the page fault. The pages were recovered without additional disk activity. Transition faults are counted in numbers of faults; because only one page is faulted in each operation, it is also equal to the number of pages faulted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.28 |
memoryTranPagesRePurposedPerSecTransition Pages RePurposed is the rate at which the number of transition cache pages were reused for a different purpose. These pages would have otherwise remained in the page cache to provide a (fast) soft fault (instead of retrieving it from backing store) in the event the page was accessed in the future. Note these pages can contain private or sharable memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.29 |
memoryWriteCopiesPerSecWrite Copies/sec is the rate at which page faults are caused by attempts to write that have been satisfied by coping of the page from elsewhere in physical memory. This is an economical way of sharing data since pages are only copied when they are written to; otherwise, the page is shared. This counter shows the number of copies, without regard for the number of pages copied in each operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.30 |
memoryCacheKBytesCache KiloBytes is the sum of the Memory\\System Cache Resident KiloBytes, Memory\\System Driver Resident KiloBytes, Memory\\System Code Resident KiloBytes, and Memory\\Pool Paged Resident KiloBytes counters. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.31 |
memoryCacheKBytesPeakCache KiloBytes Peak is the maximum number of kilobytes used by the file system cache since the system was last restarted. This might be larger than the current size of the cache. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.32 |
memoryCommittedKBytesCommitted KiloBytes is the amount of committed virtual memory, in kilobytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.33 |
memoryPoolNonpagedKBytesPool Nonpaged KiloBytes is the size, in kilobytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged KiloBytes is calculated differently than Process\\Pool Nonpaged KiloBytes, so it might not equal Process\\Pool Nonpaged KiloBytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.34 |
memoryPoolPagedKBytesPool Paged KiloBytes is the size, in kilobytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged KiloBytes is calculated differently than Process\\Pool Paged KiloBytes, so it might not equal Process\\Pool Paged KiloBytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.35 |
memoryPoolPagedResidentKBytesPool Paged Resident KiloBytes is the current size, in kilobytes, of the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Space used by the paged and nonpaged pools are taken from physical memory, so a pool that is too large denies memory space to processes. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.36 |
memorySystemCacheResidentKBytesSystem Cache Resident KiloBytes is the size, in kilobytes, of the pageable operating system code in the file system cache. This value includes only current physical pages and does not include any virtual memory pages not currently resident. It does equal the System Cache value shown in Task Manager. As a result, this value may be smaller than the actual amount of virtual memory in use by the file system cache. This value is a component of Memory\\System Code Resident KiloBytes which represents all pageable operating system code that is currently in physical memory. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.37 |
memorySystemCodeResidentKBytesSystem Code Resident KiloBytes is the size, in kilobytes of the operating system code currently in physical memory that can be written to disk when not in use. This value is a component of Memory\\System Code Total KiloBytes, which also includes operating system code on disk. Memory\\System Code Resident KiloBytes (and Memory\\System Code Total KiloBytes) does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.38 |
memorySystemCodeTotalKBytesSystem Code Total KiloBytes is the size, in kilobytes, of the pageable operating system code currently in virtual memory. It is a measure of the amount of physical memory being used by the operating system that can be written to disk when not in use. This value is calculated by summing the kilobytes in Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems loaded by Ntldr/osloader. This counter does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.39 |
memorySystemDriverResidentKBytesSystem Driver Resident KiloBytes is the size, in kilobytes, of the pageable physical memory being used by device drivers. It is the working set (physical memory area) of the drivers. This value is a component of Memory\\System Driver Total KiloBytes, which also includes driver memory that has been written to disk. Neither Memory\\System Driver Resident KiloBytes nor Memory\\System Driver Total KiloBytes includes memory that cannot be written to disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.40 |
memorySystemDriverTotalKBytesSystem Driver Total KiloBytes is the size, in kilobytes, of the pageable virtual memory currently being used by device drivers. Pageable memory can be written to disk when it is not being used. It includes physical memory (Memory\\System Driver Resident KiloBytes) and code and data paged to disk. It is a component of Memory\\System Code Total KiloBytes. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.41 |
memoryCacheMBytesCache MegaBytes is the sum of the Memory\\System Cache Resident MegaBytes, Memory\\System Driver Resident MegaBytes, Memory\\System Code Resident MegaBytes, and Memory\\Pool Paged Resident MegaBytes counters. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.42 |
memoryCacheMBytesPeakCache MegaBytes Peak is the maximum number of megabytes used by the file system cache since the system was last restarted. This might be larger than the current size of the cache. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.43 |
memoryCommittedMBytesCommitted MegaBytes is the amount of committed virtual memory, in megabytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.44 |
memoryPoolNonpagedMBytesPool Nonpaged MegaBytes is the size, in megabytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged MegaBytes is calculated differently than Process\\Pool Nonpaged MegaBytes, so it might not equal Process\\Pool Nonpaged MegaBytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.45 |
memoryPoolPagedMBytesPool Paged MegaBytes is the size, in megabytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged MegaBytes is calculated differently than Process\\Pool Paged MegaBytes, so it might not equal Process\\Pool Paged MegaBytes\\_Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.46 |
memoryPoolPagedResidentMBytesPool Paged Resident MegaBytes is the current size, in megabytes, of the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Space used by the paged and nonpaged pools are taken from physical memory, so a pool that is too large denies memory space to processes. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.47 |
memorySystemCacheResidentMBytesSystem Cache Resident MegaBytes is the size, in megabytes, of the pageable operating system code in the file system cache. This value includes only current physical pages and does not include any virtual memory pages not currently resident. It does equal the System Cache value shown in Task Manager. As a result, this value may be smaller than the actual amount of virtual memory in use by the file system cache. This value is a component of Memory\\System Code Resident MegaBytes which represents all pageable operating system code that is currently in physical memory. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.48 |
memorySystemCodeResidentMBytesSystem Code Resident MegaBytes is the size, in megabytes of the operating system code currently in physical memory that can be written to disk when not in use. This value is a component of Memory\\System Code Total MegaBytes, which also includes operating system code on disk. Memory\\System Code Resident MegaBytes (and Memory\\System Code Total MegaBytes) does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.49 |
memorySystemCodeTotalMBytesSystem Code Total MegaBytes is the size, in megabytes, of the pageable operating system code currently in virtual memory. It is a measure of the amount of physical memory being used by the operating system that can be written to disk when not in use. This value is calculated by summing the megabytes in Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems loaded by Ntldr/osloader. This counter does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.50 |
memorySystemDriverResidentMBytesSystem Driver Resident MegaBytes is the size, in megabytes, of the pageable physical memory being used by device drivers. It is the working set (physical memory area) of the drivers. This value is a component of Memory\\System Driver Total MegaBytes, which also includes driver memory that has been written to disk. Neither Memory\\System Driver Resident MegaBytes nor Memory\\System Driver Total MegaBytes includes memory that cannot be written to disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.51 |
memorySystemDriverTotalMBytesSystem Driver Total MegaBytes is the size, in megabytes, of the pageable virtual memory currently being used by device drivers. Pageable memory can be written to disk when it is not being used. It includes physical memory (Memory\\System Driver Resident MegaBytes) and code and data paged to disk. It is a component of Memory\\System Code Total MegaBytes. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.46.52 |
msmqQueueTableThe MSMQ Queue performance object monitors message statistics for a selected queue. There are instances for each queue on the computer. In addition, if an Message Queuing-based application has a private queue open on another computer, an instance for that queue is also available. The computer queues instance represents the computer's source journal and dead letter queues. SEQUENCE OF MSMQQueueEntry .1.3.6.1.4.1.9600.1.2.47 |
msmqQueueEntryPerformance information for one particular instance of 'MSMQ Queue' object. MSMQQueueEntry .1.3.6.1.4.1.9600.1.2.47.1 |
msmqInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.47.1.1 |
msmqBytesInJournalQueueThe total number of bytes that currently reside in the journal queue. For the computer queues instance, this represents the computer journal queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.47.1.2 |
msmqBytesInQueueThe total number of bytes that currently reside in the queue. For the computer queues instance, this represents the dead letter queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.47.1.3 |
msmqMessagesInJournalQueueThe total number of messages that currently reside in the journal queue. For the computer queues instance, this represents the computer journal queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.47.1.4 |
msmqMessagesInQueueThe total number of messages that currently reside in the queue. For the computer queues instance, this represents the dead letter queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.47.1.5 |
msmqServiceThe MSMQ Service performance object monitors session and message statistics for a selected computer that is running Message Queuing. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.48 |
msmqSvcIPSessionsNumber of open IP sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.1 |
msmqSvcIPXSessionsNumber of open IPX sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.2 |
msmqSvcIncomingMessagesPerSecThe rate of incoming MSMQ messages handled by the MSMQ service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.3 |
msmqSvcMSMQIncomingMessagesThe total number of incoming messages handled by the MSMQ service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.4 |
msmqSvcMSMQOutgoingMessagesThe total number of outgoing messages handled by the MSMQ service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.5 |
msmqSvcOutgoingMessagesPerSecThe rate of outgoing MSMQ messages handled by the MSMQ service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.6 |
msmqSvcSessionsThe total number of open network sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.7 |
msmqSvcTotalBytesInAllQueuesThe total number of bytes in all active queues under the MSMQ service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.8 |
msmqSvcTotalMessagesInAllQueuesThe total number of messages in all active queues under the MSMQ service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.48.9 |
nbtConnectionTableThe NBT Connection performance object consists of counters that measure the rates at which bytes are sent and received over the NetBIOS over TCP/IP (NetBT or NBT) protocol provides NetBIOS support for the TCP/IP protocol. NBT connection between the local computer and a remote computer. The connection is identified by the name of the remote computer. SEQUENCE OF NBTConnectionEntry .1.3.6.1.4.1.9600.1.2.49 |
nbtConnectionEntryPerformance information for one particular instance of 'NBT Connection' object. NBTConnectionEntry .1.3.6.1.4.1.9600.1.2.49.1 |
nbtConnectionInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.49.1.1 |
nbtConnectionBytesReceivedPerSecBytes Received/sec is the rate at which bytes are received by the local computer over an NBT connection to some remote computer. All the bytes received by the local computer over the particular NBT connection are counted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.49.1.2 |
nbtConnectionBytesSentPerSecBytes Sent/sec is the rate at which bytes are sent by the local computer over an NBT connection to some remote computer. All the bytes sent by the local computer over the particular NBT connection are counted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.49.1.3 |
nbtConnectionBytesTotalPerSecTotal Bytes/sec is the rate at which bytes are sent or received by the local computer over an NBT connection to some remote computer. All the bytes sent or received by the local computer over the particular NBT connection are counted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.49.1.4 |
netBEUITableThe NetBEUI performance object consists of counters that measure data transmission for network activity which conforms to the NetBIOS End User Interface (NetBEUI) standard. SEQUENCE OF NetBEUIEntry .1.3.6.1.4.1.9600.1.2.50 |
netBEUIEntryPerformance information for one particular instance of 'NetBEUI' object. NetBEUIEntry .1.3.6.1.4.1.9600.1.2.50.1 |
netBEUIInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.50.1.1 |
netBEUIBytesTotalPerSecBytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.2 |
netBEUIConnectionSessionTimeoutsConnection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.3 |
netBEUIConnectionsCanceledConnections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.4 |
netBEUIConnectionsNoRetriesConnections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.5 |
netBEUIConnectionsOpenConnections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.6 |
netBEUIConnectionsWithRetriesConnections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.7 |
netBEUIDatagramBytesRcvdPerSecDatagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.8 |
netBEUIDatagramBytesSentPerSecDatagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.9 |
netBEUIDatagramBytesPerSecDatagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.10 |
netBEUIDatagramsReceivedPerSecDatagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.11 |
netBEUIDatagramsSentPerSecDatagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.12 |
netBEUIDatagramsPerSecDatagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.13 |
netBEUIDisconnectsLocalDisconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.14 |
netBEUIDisconnectsRemoteDisconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.15 |
netBEUIExpirationsAckExpirations Ack is the count of T2 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.16 |
netBEUIExpirationsResponseExpirations Response is the count of T1 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.17 |
netBEUIFailuresAdapterFailures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.18 |
netBEUIFailuresLinkFailures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.19 |
netBEUIFailuresNoListenFailures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.20 |
netBEUIFailuresNotFoundFailures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.21 |
netBEUIFailuresResourceLocalFailures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.22 |
netBEUIFailuresResourceRemoteFailures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.23 |
netBEUIFrameBytesReSentPerSecFrame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.24 |
netBEUIFrameBytesReceivedPerSecFrame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.25 |
netBEUIFrameBytesRejectedPerSecFrame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.26 |
netBEUIFrameBytesSentPerSecFrame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.27 |
netBEUIFrameBytesPerSecFrame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.28 |
netBEUIFramesReSentPerSecFrames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.29 |
netBEUIFramesReceivedPerSecFrames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.30 |
netBEUIFramesRejectedPerSecFrames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.31 |
netBEUIFramesSentPerSecFrames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.32 |
netBEUIFramesPerSecFrames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.33 |
netBEUIPacketsReceivedPerSecPackets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.34 |
netBEUIPacketsSentPerSecPackets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.35 |
netBEUIPacketsPerSecPackets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.36 |
netBEUIPiggybackAckQueuedPerSecPiggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.37 |
netBEUIPiggybackAckTimeoutsPiggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.38 |
netBEUIWindowSendAverageWindow Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.39 |
netBEUIWindowSendMaximumWindow Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.50.1.40 |
netBEUIResourceTableThe NetBEUI Resource performance object consists of counters that track the use of buffers by the NetBEUI protocol. SEQUENCE OF NetBEUIResourceEntry .1.3.6.1.4.1.9600.1.2.51 |
netBEUIResourceEntryPerformance information for one particular instance of 'NetBEUI Resource' object. NetBEUIResourceEntry .1.3.6.1.4.1.9600.1.2.51.1 |
netBEUIResourceInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.51.1.1 |
netBEUIResourceTimesExhaustedTimes Exhausted is the number of times all the resources (buffers) were in use. The number in parentheses following the resource name is used to identify the resource in Event Log messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.51.1.2 |
netBEUIResourceUsedAverageUsed Average is the current number of resources (buffers) in use at this time. The number in parentheses following the resource name is used to identify the resource in Event Log messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.51.1.3 |
netBEUIResourceUsedMaximumUsed Maximum is the maximum number of NetBEUI resources (buffers) in use at any point in time. This value is useful in sizing the maximum resources provided. The number in parentheses following the resource name is used to identify the resource in Event Log messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.51.1.4 |
networkInterfaceTableThe Network Interface performance object consists of counters that measure the rates at which bytes and packets are sent and received over a TCP/IP connection. It includes counters that monitor connection errors. The Network Interface counters display data about the network adapters on the server computer. The first instance of the Network Interface object (Instance 1) that you see in System Monitor represents the loopback. The loopback is a local path through the protocol driver and the network adapter. All other instances represent installed network adapters. SEQUENCE OF NetworkInterfaceEntry .1.3.6.1.4.1.9600.1.2.52 |
networkInterfaceEntryPerformance information for one particular instance of 'Network Interface' object. NetworkInterfaceEntry .1.3.6.1.4.1.9600.1.2.52.1 |
netInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.52.1.1 |
netBytesReceivedPerSecBytes Received/sec is the rate at which bytes are received on the interface, including framing characters.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.2 |
netBytesSentPerSecBytes Sent/sec is the rate at which bytes are sent on the interface, including framing characters.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.3 |
netBytesTotalPerSecBytes Total/sec is the rate at which bytes are sent and received on the interface, including framing characters.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.4 |
netCurrentBandwidthCurrent Bandwidth is an estimate of the interface's current bandwidth in bits per second (BPS). For interfaces that do not vary in bandwidth or for those where no accurate estimation can be made, this value is the nominal bandwidth.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.5 |
netOutputQueueLengthOutput Queue Length is the length of the output packet queue (in packets). If this is longer than 2, delays are being experienced and the bottleneck should be found and eliminated if possible. Since the requests are queued by NDIS in this implementation, this will always be 0.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.6 |
netPacketsOutboundDiscardedPackets Outbound Discarded is the number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.7 |
netPacketsOutboundErrorsPackets Outbound Errors is the number of outbound packets that could not be transmitted because of errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.8 |
netPacketsReceivedDiscardedPackets Received Discarded is the number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.9 |
netPacketsReceivedErrorsPackets Received Errors is the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.10 |
netPacketsRcvdNonUnicastPerSecPackets Received Non-Unicast/sec is the rate at which non-unicast (i.e., subnet broadcast or subnet multicast) packets are delivered to a higher-layer protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.11 |
netPacketsReceivedUnicastPerSecPackets Received Unicast/sec is the rate at which (subnet) unicast packets are delivered to a higher-layer protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.12 |
netPacketsReceivedUnknownPackets Received Unknown is the number of packets received via the interface that were discarded because of an unknown or unsupported protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.13 |
netPacketsReceivedPerSecPackets Received/sec is the rate at which packets are received on the network interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.14 |
netPacketsSentNonUnicastPerSecPackets Sent Non-Unicast/sec is the rate at which packets are requested to be transmitted to non-unicast (i.e., subnet broadcast or subnet multicast) addresses by higher-level protocols. The rate includes the packets that were discarded or not sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.15 |
netPacketsSentUnicastPerSecPackets Sent Unicast/sec is the rate at which packets are requested to be transmitted to subnet-unicast addresses by higher-level protocols. The rate includes the packets that were discarded or not sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.16 |
netPacketsSentPerSecPackets Sent/sec is the rate at which packets are sent on the network interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.17 |
netPacketsPerSecPackets/sec is the rate at which packets are sent and received on the network interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.52.1.18 |
nntpCommandsTableThe NNTP Commands performance object includes counters for all NNTP commands processed by the Network News Transport Protocol (NNTP) service, which is installed as an optional component of Internet Information Services. NNTP counters are started for each virtual server instance and are reset to zero when the virtual server is started. A single NNTP service can have many virtual servers (also called sites). SEQUENCE OF NNTPCommandsEntry .1.3.6.1.4.1.9600.1.2.53 |
nntpCommandsEntryPerformance information for one particular instance of 'NNTP Commands' object. NNTPCommandsEntry .1.3.6.1.4.1.9600.1.2.53.1 |
nntpCmdsInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.53.1.1 |
nntpCmdsArticleCmdsArticle Commands is the number of ARTICLE commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.2 |
nntpCmdsArticleCmdsPerSecArticle Commands/Sec is the number of ARTICLE commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.3 |
nntpCmdsCheckCmdsCheck Commands is the number of CHECK commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.4 |
nntpCmdsCheckCmdsPerSecCheck Commands/Sec is the number of CHECK commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.5 |
nntpCmdsGroupCmdsGroup Commands is the number of GROUP commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.6 |
nntpCmdsGroupCmdsPerSecGroup Commands/Sec is the number of GROUP commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.7 |
nntpCmdsHelpCmdsHelp Commands is the number of HELP commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.8 |
nntpCmdsHelpCmdsPerSecHelp Commands/Sec is the number of HELP commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.9 |
nntpCmdsIHaveCmdsIHave Commands is the number of IHAVE commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.10 |
nntpCmdsIHaveCmdsPerSecIHave Commands/Sec is the number of IHAVE commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.11 |
nntpCmdsLastCmdsLast Commands is the number of LAST commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.12 |
nntpCmdsLastCmdsPerSecLast Commands/Sec is the number of LAST commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.13 |
nntpCmdsListCmdsList Commands is the number of LIST commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.14 |
nntpCmdsListCmdsPerSecList Commands/Sec is the number of LIST commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.15 |
nntpCmdsLogonAttemptsLogon Attempts is the number of logon attempts that have been made to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.16 |
nntpCmdsLogonAttemptsPerSecLogon Attempts/Sec is the number of logon attempts per sec that have been made to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.17 |
nntpCmdsLogonFailuresLogon Failures is the number of logons that had failed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.18 |
nntpCmdsLogonFailuresPerSecLogon Failures/Sec is the number of logons per sec that had failed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.19 |
nntpCmdsModeCmdsMode Commands is the number of MODE commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.20 |
nntpCmdsModeCmdsPerSecMode Commands/Sec is the number of MODE commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.21 |
nntpCmdsNewgroupsCmdsNewgroups Commands is the number of NEWGROUPS commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.22 |
nntpCmdsNewgroupsCmdsPerSecNewgroups Commands/Sec is the number of NEWGROUPS commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.23 |
nntpCmdsNewnewsCmdsNewnews Commands is the number of NEWNEWS commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.24 |
nntpCmdsNewnewsCmdsPerSecNewnews Commands/Sec is the number of NEWNEWS commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.25 |
nntpCmdsNextCmdsNext Commands is the number of NEXT commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.26 |
nntpCmdsNextCmdsPerSecNext Commands/Sec is the number of NEXT commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.27 |
nntpCmdsPostCmdsPost Commands is the number of POST commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.28 |
nntpCmdsPostCmdsPerSecPost Commands/Sec is the number of POST commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.29 |
nntpCmdsQuitCmdsQuit Commands is the number of QUIT commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.30 |
nntpCmdsQuitCmdsPerSecQuit Commands/Sec is the number of QUIT commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.31 |
nntpCmdsSearchCmdsSearch Commands is the number of SEARCH commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.32 |
nntpCmdsSearchCmdsPerSecSearch Commands/Sec is the number of SEARCH commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.33 |
nntpCmdsStatCmdsStat Commands is the number of STAT commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.34 |
nntpCmdsStatCmdsPerSecStat Commands/Sec is the number of STAT commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.35 |
nntpCmdsTakethisCmdsTakethis Commands is the number of TAKETHIS commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.36 |
nntpCmdsTakethisCmdsPerSecTakethis Commands/Sec is the number of TAKETHIS commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.37 |
nntpCmdsXHdrCmdsXHdr Commands is the number of XHDR commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.38 |
nntpCmdsXHdrCmdsPerSecXHdr Commands/Sec is the number of XHDR commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.39 |
nntpCmdsXOverCmdsXOver Commands is the number of XOVER commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.40 |
nntpCmdsXOverCmdsPerSecXOver Commands/Sec is the number of XOVER commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.41 |
nntpCmdsXPatCmdsXPat Commands is the number of XPAT commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.42 |
nntpCmdsXPatCmdsPerSecXPat Commands/Sec is the number of XPAT commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.43 |
nntpCmdsXReplicCmdsXReplic Commands is the number of XREPLIC commands received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.44 |
nntpCmdsXReplicCmdsPerSecXReplic Commands/Sec is the number of XREPLIC commands per sec received by the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.53.1.45 |
nntpServerTableThe NNTP Server performance object monitors posting, authentication, and connection activity on an NNTP server. The Network News Transport Protocol (NNTP) service is an optional component of Internet Information Services. NNTP counters are started for each virtual server instance and are reset to zero when the virtual server is started. A single NNTP service can have many virtual servers (also called sites). SEQUENCE OF NNTPServerEntry .1.3.6.1.4.1.9600.1.2.54 |
nntpServerEntryPerformance information for one particular instance of 'NNTP Server' object. NNTPServerEntry .1.3.6.1.4.1.9600.1.2.54.1 |
nntpSrvrInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.54.1.1 |
nntpSrvrArticleMapEntriesArticle Map Entries is the entries inserted into the article mapping table of the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.2 |
nntpSrvrArticleMapEntriesPerSecArticle Map Entries/Sec is the entries inserted per sec into the article mapping table of the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.3 |
nntpSrvrArticlesDeletedArticles Deleted is the number of articles deleted on the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.4 |
nntpSrvrArticlesDeletedPerSecArticles Deleted/Sec is the number of articles deleted per sec on the NNTP Server since it was started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.5 |
nntpSrvrArticlesPostedArticles Posted is the number of articles posted to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.6 |
nntpSrvrArticlesPostedPerSecArticles Posted/Sec is the number of articles posted per sec to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.7 |
nntpSrvrArticlesReceivedArticles Received is the total number of files received by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.8 |
nntpSrvrArticlesReceivedPerSecArticles Received/Sec is the total number of files per sec received by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.9 |
nntpSrvrArticlesSentArticles Sent is the total number of files sent by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.10 |
nntpSrvrArticlesSentPerSecArticles Sent/Sec is the total number of files sent per sec by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.11 |
nntpSrvrArticlesTotalArticles Total is the sum of Articles Sent and Articles Received. This is the total number of files transferred by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.12 |
nntpSrvrBytesReceivedPerSecBytes Received/sec is the rate that data bytes are received by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.13 |
nntpSrvrBytesSentPerSecBytes Sent/sec is the rate that data bytes are sent by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.14 |
nntpSrvrBytesTotalPerSecBytes Total/sec is the sum of Bytes Sent/sec and Bytes Received/sec. This is the total rate of bytes transferred by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.15 |
nntpSrvrControlMessagesFailedControl Messages Failed is the total number of control messages failed or not applied by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.16 |
nntpSrvrControlMessagesReceivedControl Messages Received is the total number of control messages received by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.17 |
nntpSrvrCurrentAnonymousUsersCurrent Anonymous Users is the number of anonymous users currently connected to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.18 |
nntpSrvrCurrentConnectionsCurrent Connections is the current number of connections to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.19 |
nntpSrvrCurrentNonAnonymousUsersCurrent NonAnonymous Users is the number of nonanonymous users currently connected to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.20 |
nntpSrvrCurrentOutboundConnsCurrent Outbound Connections is the number of current outbound connections being made by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.21 |
nntpSrvrFailedOutboundLogonsFailed Outbound Logons is the number of failed outbound logons made by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.22 |
nntpSrvrHistoryMapEntriesHistory Map Entries is the entries inserted into the history mapping table of the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.23 |
nntpSrvrHistoryMapEntriesPerSecHistory Map Entries/Sec is the entries inserted per sec into the history mapping table of the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.24 |
nntpSrvrMaximumAnonymousUsersMaximum Anonymous Users is the maximum number of anonymous users simultaneously connected to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.25 |
nntpSrvrMaximumConnectionsMaximum Connections is the maximum number of simultaneous connections to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.26 |
nntpSrvrMaximumNonAnonymousUsersMaximum NonAnonymous Users is the maximum number of nonanonymous users simultaneously connected to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.27 |
nntpSrvrModeratedPostingsFailedModerated Postings Failed is the total number of moderated postings the NNTP Server fails to send to an SMTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.28 |
nntpSrvrModeratedPostingsSentModerated Postings Sent is the total number of moderated postings the NNTP Server attempts to send to an SMTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.29 |
nntpSrvrSessionsFlowControlledSessions Flow Control is the number of client sessions currently in a flow controlled state in the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.30 |
nntpSrvrTotalAnonymousUsersTotal Anonymous Users is the total number of anonymous users that have ever connected to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.31 |
nntpSrvrTotalConnectionsTotal Connections is the number of connections that have been made to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.32 |
nntpSrvrTotalNonAnonymousUsersTotal NonAnonymous Users is the total number of nonanonymous users that have ever connected to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.33 |
nntpSrvrTotalOutboundConnectionsTotal Outbound Connections is the number of outbound connections that have been made by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.34 |
nntpSrvrTotalOutboundConnsFailedTotal Outbound Connections Failed is the number of unsucessful outbound connections that have been made by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.35 |
nntpSrvrTotalPassiveFeedsTotal Passive Feeds is the number of passive feeds accepted by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.36 |
nntpSrvrTotalPullFeedsTotal Pull Feeds is the number of pull feeds made by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.37 |
nntpSrvrTotalPushFeedsTotal Push Feeds is the number of push feeds made by the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.38 |
nntpSrvrTotalSSLConnectionsTotal SSL Connections is the number of SSL connections that have been made to the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.39 |
nntpSrvrXoverEntriesXover Entries is the number of xover entries in the xover table table of the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.40 |
nntpSrvrXoverEntriesPerSecXover Entries/Sec is the number of xover entries inserted per sec in the xover table table of the NNTP Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.54.1.41 |
ntdsThe NTDS object provides statistics about the activity of Active Directory. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.55 |
ntdsABANRPerSecThe rate at which Address Book clients perform Ambiguous Name Resolutions operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.1 |
ntdsABBrowsesPerSecAB Browses/sec is the rate at which Address Book clients perform browse operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.2 |
ntdsABClientSessionsAB Client Sessions is the number of connected Address Book client sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.3 |
ntdsABMatchesPerSecThe rate at which Address Book clients perform find operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.4 |
ntdsABPropertyReadsPerSecThe rate at which Address Book clients perform property read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.5 |
ntdsABProxyLookupsPerSecThe rate at which proxy clients perform search operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.6 |
ntdsABSearchesPerSecThe rate at which Address Book clients perform key search operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.7 |
ntdsATQThreadsLDAPThe number of threads that ATQ has currently allocated to servicing LDAP requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.8 |
ntdsATQThreadsOtherThe number of threads that the ATQ has currently allocated to DS services other than LDAP.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.9 |
ntdsATQThreadsTotalThe total number of ATQ threads that are either waiting to service an incoming request, or are already servicing a request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.10 |
ntdsDRAHighestUSNCommitHighPartHigh-order 32 bits of the highest USN Committed on the DSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.11 |
ntdsDRAHighestUSNCommitLowPartLow-order 32 bits of the highest USN Committed on the DSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.12 |
ntdsDRAHighestUSNIssuedHighPartHigh-order 32 bits of the highest USN Issued on the DSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.13 |
ntdsDRAHighestUSNIssuedLowPartLow-order 32 bits of the highest USN Issued on the DSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.14 |
ntdsDRAInboundBytesCBSACSBootCompressed size in bytes of inbound compressed replication data (size after compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.15 |
ntdsDRAInboundBytesCBSACPerSecCompressed size in bytes of inbound compressed replication data (size after compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.16 |
ntdsDRAInboundBytesCBSBCSBootOriginal size in bytes of inbound compressed replication data (size before compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.17 |
ntdsDRAInboundBytesCBSBCPerSecOriginal size in bytes of inbound compressed replication data (size before compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.18 |
ntdsDRAInboundBytesNotCWSSBootNumber of bytes replicated in that were not compressed at the source (i.e., from DSAs in the same site).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.19 |
ntdsDRAInboundBytesNotCWSPerSecNumber of bytes replicated in that were not compressed at the source (i.e., from DSAs in the same site).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.20 |
ntdsDRAInboundBytesTotalBootTotal number of bytes replicated in. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.21 |
ntdsDRAInboundBytesTotalPerSecTotal number of bytes replicated in. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.22 |
ntdsDRAInboundFullSyncObjsRemainNumber of objects remaining until the full sync completes (when set).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.23 |
ntdsDRAInboundObjUpdsRemainInPktThe number of object updates received in the current directory replication update packet that have not yet been applied to the local server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.24 |
ntdsDRAInboundObjsAppliedPerSecThe rate at which replication updates received from replication partners are applied by the local directory service. This count excludes changes that are received but not applied (e.g., when the change is already present). This indicates how much replication update activity is occuring on the server as a result of changes generated on other servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.25 |
ntdsDRAInboundObjsFilteredPerSecNumber of objects received from inbound replication partners that contained no updates that needed to be applied.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.26 |
ntdsDRAInboundObjectsPerSecNo of objects received from neighbors through inbound replication.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.27 |
ntdsDRAInboundPropAppliedPerSecNo of properties that are updated due to incoming property winning the reconciliation logic.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.28 |
ntdsDRAInboundPropFilteredPerSecNo of property changes that are received during the replication that we have already seen.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.29 |
ntdsDRAInboundPropTotalPerSecTotal number of object properties received from inbound replication partners.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.30 |
ntdsDRAInboundValuesDNsPerSecNumber of object property values received from inbound replication partners that are Distinguished Names; i.e., that reference other objects. DN-values, such as group or distribution list memberships, are generally more expensive to apply than other kinds of values.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.31 |
ntdsDRAInboundValuesTotalPerSecTotal number of object property values received from inbound replication partners. Each inbound object has one or more properties, and each property has zero or more values. Zero values indicates property removal.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.32 |
ntdsDRAOutboundBytesCBSACSBootCompressed size in bytes of outbound compressed replication data (size after compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.33 |
ntdsDRAOutboundBytesCBSACPerSecCompressed size in bytes of outbound compressed replication data (size after compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.34 |
ntdsDRAOutboundBytesCBSBCSBootOriginal size in bytes of outbound compressed replication data (size before compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.35 |
ntdsDRAOutboundBytesCBSBCPerSecOriginal size in bytes of outbound compressed replication data (size before compression, from DSAs in other sites).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.36 |
ntdsDRAOutboundBytesNotCWSSBootNumber of bytes replicated out that were not compressed (i.e., from DSAs in the same site).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.37 |
ntdsDRAOutboundBytesNotCWSPerSecNumber of bytes replicated out that were not compressed (i.e., from DSAs in the same site).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.38 |
ntdsDRAOutboundBytesTotalBootTotal number of bytes replicated out. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.39 |
ntdsDRAOutboundBytesTotalPerSecTotal number of bytes replicated out. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression).ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.40 |
ntdsDRAOutboundObjsFilterPerSecNumber of objects looked at by outbound replication that were determined to have no updates that the outbound partner did not already have.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.41 |
ntdsDRAOutboundObjectsPerSecNo of objects replicated out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.42 |
ntdsDRAOutboundPropertiesPerSecNo of properties replicated out.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.43 |
ntdsDRAOutboundValuesDNsPerSecNumber of object property values containing Distinguished Names sent to outbound replication partners. DN-values, such as group or distribution list memberships, are generally more expensive to read than other kinds of values.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.44 |
ntdsDRAOutboundValuesTotalPerSecNumber of object property values sent to outbound replication partners.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.45 |
ntdsDRAPendingReplicationSyncDRA Pending Replication Synchronizations is the number of directory synchronizations that are queued for this server but not yet processed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.46 |
ntdsDRASyncFailOnSchemaMismatchNo of sync requests made to the neighbors that failed because their schema are out of sync.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.47 |
ntdsDRASyncRequestsMadeNo of sync requests made to the neighbors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.48 |
ntdsDRASyncRequestsSuccessfulNo of sync requests made to the neighbors that successfully returned.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.49 |
ntdsDSPercentReadsOther% of directory reads not coming from SAM/DRA/LDAP/LSA/XDS/KCC/NSPI.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.50 |
ntdsDSPercentReadsFromDRA% of directory reads coming from DRA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.51 |
ntdsDSPercentReadsFromKCC% of directory reads coming from KCC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.52 |
ntdsDSPercentReadsFromLSA% of directory reads coming from LSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.53 |
ntdsDSPercentReadsFromNSPI% of directory reads coming from NSPI.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.54 |
ntdsDSPercentReadsFromSAM% of directory reads coming from SAM.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.55 |
ntdsDSPercentReadsFromXDS% of directory reads coming from XDS.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.56 |
ntdsDSPercentSearchesOther% of directory searches not coming from SAM/DRA/LDAP/LSA/XDS/KCC/NSPI.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.57 |
ntdsDSPercentSearchesFromDRA% of directory searches coming from DRA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.58 |
ntdsDSPercentSearchesFromKCC% of directory searches coming from KCC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.59 |
ntdsDSPercentSearchesFromLDAP% of directory searches coming from LDAP.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.60 |
ntdsDSPercentSearchesFromLSA% of directory searches coming from LSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.61 |
ntdsDSPercentSearchesFromNSPI% of directory searches coming from NSPI.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.62 |
ntdsDSPercentSearchesFromSAM% of directory searches coming from SAM.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.63 |
ntdsDSPercentSearchesFromXDS% of directory searches coming from XDS.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.64 |
ntdsDSPercentWritesOther% of directory writes not coming from SAM/DRA/LDAP/LSA/XDS/KCC/NSPI.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.65 |
ntdsDSPercentWritesFromDRA% of directory writes coming from DRA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.66 |
ntdsDSPercentWritesFromKCC% of directory writes coming from KCC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.67 |
ntdsDSPercentWritesFromLDAP% of directory writes coming from LDAP.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.68 |
ntdsDSPercentWritesFromLSA% of directory writes coming from LSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.69 |
ntdsDSPercentWritesFromNSPI% of directory writes coming from NSPI.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.70 |
ntdsDSPercentWritesFromSAM% of directory writes coming from SAM.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.71 |
ntdsDSPercentWritesFromXDS% of directory writes coming from XDS.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.72 |
ntdsDSClientBindsPerSecNumber of ntdsapi.dll binds per second serviced by this DC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.73 |
ntdsDSClientNameTranslatePerSecNumber of ntdsapi.dll name translations per second serviced by this DC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.74 |
ntdsDSDirectoryReadsPerSecNumber of directory reads per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.75 |
ntdsDSDirectorySearchesPerSecNumber of directory searches per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.76 |
ntdsDSDirectoryWritesPerSecNumber of directory writes per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.77 |
ntdsDSMonitorListSizeThe number of requests to be notified when objects are updated that are currently registered with this DSA.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.78 |
ntdsDSNameCacheHitRateThe percentage of directory object name component look ups that are satisfied out of the DSA's name cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.79 |
ntdsDSNotifyQueueSizeThe number of pending update notifications that have been queued, but not yet transmitted to clients.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.80 |
ntdsDSSearchSuboperationsPerSecNumber of search suboperations per second. One search operation is made up of many sub operations. A sub operation roughly corresponds to an object the search causes the DS to consider.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.81 |
ntdsDSSecurityDescPropEventsDS Security Descriptor Propagations Events is the number of Security Descriptor Propagation Events that are queued but not yet processed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.82 |
ntdsDSSecurityDescPropAvgExTimeAverage length of time the Security Descriptor propagator spends waiting for exclusive access to Data Base elements during a Security Descriptor Propagation sub-operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.83 |
ntdsDSSecurityDescPropRunQueueNumber of objects remaining to examine while processing the current DS Security Descriptor Propagator Event.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.84 |
ntdsDSSecurityDescSubopPerSecNumber of Security Descriptor Propagation suboperations per second. One Security Descriptor Propagation operation is made up of many sub operations. A sub operation roughly corresponds to an object the propagation causes the propagator to examine.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.85 |
ntdsDSServerBindsPerSecNumber of DC-to-DC binds per second serviced by this DC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.86 |
ntdsDSServerNameTranslatePerSecNumber of DC-to-DC name translations per second serviced by this DC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.87 |
ntdsDSThreadsInUseDS Threads in Use is the current number of threads in use by the directory service (different than the number of threads in the directory service process). Threads in Use is the number of threads currently servicing client API calls and can be used to indicate whether additional processors could be of benefit.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.88 |
ntdsKDCASRequestsThe number of AS requests serviced by the KDC per second. AS requests are used by client to obtain a ticket granting ticket.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.89 |
ntdsKDCTGSRequestsThe number of TGS requests serviced by the KDC per second. TGS requests are used by the client to obtain a ticket to a resource.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.90 |
ntdsKerberosAuthenticationsThe number of times per second that clients use a ticket to this DC to authenticate to this DC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.91 |
ntdsLDAPActiveThreadsLDAP Active Threads is the current number of threads in use by the LDAP subsystem of the local direcotry service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.92 |
ntdsLDAPBindTimeTime (in milliseconds) taken for last successful LDAP bind.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.93 |
ntdsLDAPClientSessionsLDAP Client Sessions is the number of connected LDAP client sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.94 |
ntdsLDAPSearchesPerSecLDAP Searches/sec is the rate at which LDAP clients perform search operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.95 |
ntdsLDAPSuccessfulBinds% of LDAP bind attempts that were successful.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.96 |
ntdsLDAPSuccessfulBindsPerSecNumber of LDAP Binds per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.97 |
ntdsLDAPUDPOperationsPerSecThe number of UDP operations the LDAP server is processing per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.98 |
ntdsLDAPWritesPerSecLDAP Writes/sec is the rate at which LDAP clients perform write operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.99 |
ntdsNTLMAuthenticationsNumber of NTLM authentications per second serviced by this DC.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.100 |
ntdsSAMAccountGroupMemEvalPerSecNumber of SAM Account Group Membership Evaluations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.101 |
ntdsSAMDisplayInfoQueriesPerSecNumber of queries made to obtain SAM display information per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.102 |
ntdsSAMEnumerationsPerSecNumber of SAM Enumerations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.103 |
ntdsSAMGCEvaluationsPerSecNumber of SAM Global Catalog Evaluations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.104 |
ntdsSAMMachineCreateAtpsPerSecNumber of attempts made to create SAM machine account per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.105 |
ntdsSAMMembershipChangesPerSecNumber of SAM membership changes per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.106 |
ntdsSAMNonTransMemEvalPerSecNumber of SAM Non-Transitive Membership Evaluations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.107 |
ntdsSAMPasswordChangesPerSecNumber of SAM password changes per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.108 |
ntdsSAMResourceGrpMemEvalPerSecNumber of SAM Resource Group Membership Evaluations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.109 |
ntdsSAMSuccessMachineCreatPerSecNumber of successful machine creations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.110 |
ntdsSAMSuccessUserCreatePerSecNumber of successful user creations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.111 |
ntdsSAMTransitiveMembEvalPerSecNumber of SAM Transitive Membership Evaluations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.112 |
ntdsSAMUniversalGrpMemEvalPerSecNumber of SAM Universal Group Membership Evaluations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.113 |
ntdsSAMUserCreateAttemptsPerSecNumber of attempts made to create SAM user account per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.114 |
ntdsXDSClientSessionsXDS Client Sessions is the number of connected Extended Directory Service client sessions. This indicates the number of connections from other Windows NT services and the Windows NT Administrator program.ro Gauge32 .1.3.6.1.4.1.9600.1.2.55.115 |
nwLinkIPXTableThe NWLink IPX performance object consists of counters that measure datagram transmission to and from computers using the IPX protocol. This object only reports valid data for counters that monitor datagrams and packets; for frame-related counters, the object tends to report zero values. In addition, connection-related data is not likely to be useful because IPX is a connectionless protocol. SEQUENCE OF NWLinkIPXEntry .1.3.6.1.4.1.9600.1.2.56 |
nwLinkIPXEntryPerformance information for one particular instance of 'NWLink IPX' object. NWLinkIPXEntry .1.3.6.1.4.1.9600.1.2.56.1 |
ipxInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.56.1.1 |
ipxBytesTotalPerSecBytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.2 |
ipxConnectionSessionTimeoutsConnection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.3 |
ipxConnectionsCanceledConnections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.4 |
ipxConnectionsNoRetriesConnections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.5 |
ipxConnectionsOpenConnections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.6 |
ipxConnectionsWithRetriesConnections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.7 |
ipxDatagramBytesReceivedPerSecDatagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.8 |
ipxDatagramBytesSentPerSecDatagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.9 |
ipxDatagramBytesPerSecDatagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.10 |
ipxDatagramsReceivedPerSecDatagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.11 |
ipxDatagramsSentPerSecDatagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.12 |
ipxDatagramsPerSecDatagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.13 |
ipxDisconnectsLocalDisconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.14 |
ipxDisconnectsRemoteDisconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.15 |
ipxExpirationsAckExpirations Ack is the count of T2 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.16 |
ipxExpirationsResponseExpirations Response is the count of T1 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.17 |
ipxFailuresAdapterFailures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.18 |
ipxFailuresLinkFailures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.19 |
ipxFailuresNoListenFailures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.20 |
ipxFailuresNotFoundFailures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.21 |
ipxFailuresResourceLocalFailures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.22 |
ipxFailuresResourceRemoteFailures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.23 |
ipxFrameBytesReSentPerSecFrame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.24 |
ipxFrameBytesReceivedPerSecFrame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.25 |
ipxFrameBytesRejectedPerSecFrame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.26 |
ipxFrameBytesSentPerSecFrame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.27 |
ipxFrameBytesPerSecFrame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.28 |
ipxFramesReSentPerSecFrames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.29 |
ipxFramesReceivedPerSecFrames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.30 |
ipxFramesRejectedPerSecFrames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.31 |
ipxFramesSentPerSecFrames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.32 |
ipxFramesPerSecFrames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.33 |
ipxPacketsReceivedPerSecPackets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.34 |
ipxPacketsSentPerSecPackets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.35 |
ipxPacketsPerSecPackets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.36 |
ipxPiggybackAckQueuedPerSecPiggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.37 |
ipxPiggybackAckTimeoutsPiggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.38 |
ipxWindowSendAverageWindow Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.39 |
ipxWindowSendMaximumWindow Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.56.1.40 |
nwLinkNetBIOSTableThe NWLink NetBIOS performance object consists of counters that monitor IPX transport rates and connections. This object only reports valid data for counters that monitor datagrams and packets; for frame-related counters, the object tends to report zero values. SEQUENCE OF NWLinkNetBIOSEntry .1.3.6.1.4.1.9600.1.2.57 |
nwLinkNetBIOSEntryPerformance information for one particular instance of 'NWLink NetBIOS' object. NWLinkNetBIOSEntry .1.3.6.1.4.1.9600.1.2.57.1 |
netBIOSInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.57.1.1 |
netBIOSBytesTotalPerSecBytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.2 |
netBIOSConnectionSessionTimeoutsConnection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.3 |
netBIOSConnectionsCanceledConnections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.4 |
netBIOSConnectionsNoRetriesConnections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.5 |
netBIOSConnectionsOpenConnections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.6 |
netBIOSConnectionsWithRetriesConnections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.7 |
netBIOSDatagramBytesRcvdPerSecDatagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.8 |
netBIOSDatagramBytesSentPerSecDatagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.9 |
netBIOSDatagramBytesPerSecDatagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.10 |
netBIOSDatagramsReceivedPerSecDatagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.11 |
netBIOSDatagramsSentPerSecDatagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.12 |
netBIOSDatagramsPerSecDatagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.13 |
netBIOSDisconnectsLocalDisconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.14 |
netBIOSDisconnectsRemoteDisconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.15 |
netBIOSExpirationsAckExpirations Ack is the count of T2 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.16 |
netBIOSExpirationsResponseExpirations Response is the count of T1 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.17 |
netBIOSFailuresAdapterFailures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.18 |
netBIOSFailuresLinkFailures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.19 |
netBIOSFailuresNoListenFailures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.20 |
netBIOSFailuresNotFoundFailures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.21 |
netBIOSFailuresResourceLocalFailures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.22 |
netBIOSFailuresResourceRemoteFailures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.23 |
netBIOSFrameBytesReSentPerSecFrame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.24 |
netBIOSFrameBytesReceivedPerSecFrame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.25 |
netBIOSFrameBytesRejectedPerSecFrame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.26 |
netBIOSFrameBytesSentPerSecFrame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.27 |
netBIOSFrameBytesPerSecFrame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.28 |
netBIOSFramesReSentPerSecFrames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.29 |
netBIOSFramesReceivedPerSecFrames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.30 |
netBIOSFramesRejectedPerSecFrames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.31 |
netBIOSFramesSentPerSecFrames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.32 |
netBIOSFramesPerSecFrames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.33 |
netBIOSPacketsReceivedPerSecPackets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.34 |
netBIOSPacketsSentPerSecPackets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.35 |
netBIOSPacketsPerSecPackets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.36 |
netBIOSPiggybackAckQueuedPerSecPiggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.37 |
netBIOSPiggybackAckTimeoutsPiggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.38 |
netBIOSWindowSendAverageWindow Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.39 |
netBIOSWindowSendMaximumWindow Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.57.1.40 |
nwLinkSPXTableThe NWLink SPX performance object consists of counters that measure data transmission and session connections for computers using the SPX protocol. This object only reports valid data for counters that monitor datagrams and packets; for frame-related counters, the object tends to report zero values. SEQUENCE OF NWLinkSPXEntry .1.3.6.1.4.1.9600.1.2.58 |
nwLinkSPXEntryPerformance information for one particular instance of 'NWLink SPX' object. NWLinkSPXEntry .1.3.6.1.4.1.9600.1.2.58.1 |
spxInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.58.1.1 |
spxBytesTotalPerSecBytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.2 |
spxConnectionSessionTimeoutsConnection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.3 |
spxConnectionsCanceledConnections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.4 |
spxConnectionsNoRetriesConnections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.5 |
spxConnectionsOpenConnections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.6 |
spxConnectionsWithRetriesConnections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.7 |
spxDatagramBytesReceivedPerSecDatagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.8 |
spxDatagramBytesSentPerSecDatagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.9 |
spxDatagramBytesPerSecDatagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.10 |
spxDatagramsReceivedPerSecDatagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.11 |
spxDatagramsSentPerSecDatagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.12 |
spxDatagramsPerSecDatagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.13 |
spxDisconnectsLocalDisconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.14 |
spxDisconnectsRemoteDisconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.15 |
spxExpirationsAckExpirations Ack is the count of T2 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.16 |
spxExpirationsResponseExpirations Response is the count of T1 timer expirations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.17 |
spxFailuresAdapterFailures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.18 |
spxFailuresLinkFailures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.19 |
spxFailuresNoListenFailures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.20 |
spxFailuresNotFoundFailures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.21 |
spxFailuresResourceLocalFailures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.22 |
spxFailuresResourceRemoteFailures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.23 |
spxFrameBytesReSentPerSecFrame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.24 |
spxFrameBytesReceivedPerSecFrame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.25 |
spxFrameBytesRejectedPerSecFrame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.26 |
spxFrameBytesSentPerSecFrame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.27 |
spxFrameBytesPerSecFrame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.28 |
spxFramesReSentPerSecFrames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.29 |
spxFramesReceivedPerSecFrames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.30 |
spxFramesRejectedPerSecFrames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.31 |
spxFramesSentPerSecFrames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.32 |
spxFramesPerSecFrames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.33 |
spxPacketsReceivedPerSecPackets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.34 |
spxPacketsSentPerSecPackets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.35 |
spxPacketsPerSecPackets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.36 |
spxPiggybackAckQueuedPerSecPiggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.37 |
spxPiggybackAckTimeoutsPiggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.38 |
spxWindowSendAverageWindow Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.39 |
spxWindowSendMaximumWindow Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.58.1.40 |
objectsThe Objects performance object consists of counters that monitor logical objects in the system, such as processes, threads, mutexes, and semaphores. This information can be used to detect the unnecessary consumption of computer resources. Each object requires memory to store basic information about the object. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.59 |
objectsEventsEvents is the number of events in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. An event is used when two or more threads wish to synchronize execution.ro Gauge32 .1.3.6.1.4.1.9600.1.2.59.1 |
objectsMutexesMutexes counts the number of mutexes in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. Mutexes are used by threads to assure only one thread is executing some section of code.ro Gauge32 .1.3.6.1.4.1.9600.1.2.59.2 |
objectsProcessesProcesses is the number of processes in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. Each process represents the running of a program.ro Gauge32 .1.3.6.1.4.1.9600.1.2.59.3 |
objectsSectionsSections is the number of sections in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. A section is a portion of virtual memory created by a process for storing data. A process can share sections with other processes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.59.4 |
objectsSemaphoresSemaphores is the number of semaphores in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. Threads use semaphores to obtain exclusive access to data structures that they share with other threads.ro Gauge32 .1.3.6.1.4.1.9600.1.2.59.5 |
objectsThreadsThreads is the number of threads in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. A thread is the basic executable entity that can execute instructions in a processor.ro Gauge32 .1.3.6.1.4.1.9600.1.2.59.6 |
pagingFileTableThe Paging File performance object consists of counters that monitor the paging file(s) on the computer. The paging file is a reserved space on disk that backs up committed physical memory on the computer. SEQUENCE OF PagingFileEntry .1.3.6.1.4.1.9600.1.2.60 |
pagingFileEntryPerformance information for one particular instance of 'Paging File' object. PagingFileEntry .1.3.6.1.4.1.9600.1.2.60.1 |
pagingFileInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.60.1.1 |
pagingFilePercentUsageThe amount of the Page File instance in use in percent. See also Process: Page File Bytes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.60.1.2 |
pagingFilePercentUsagePeakThe peak usage of the Page File instance in percent. See also Process: Page File Bytes Peak.ro Gauge32 .1.3.6.1.4.1.9600.1.2.60.1.3 |
physicalDiskTableThe PhysicalDisk performance object consists of counters that monitor hard or fixed disk drives on a computer. Disks are used to store file, program, and paging data, are read to retrieve these items, and are written to record changes to them. The values of physical disk counters are sums of the values of the logical disks (or partitions) into which they are divided. SEQUENCE OF PhysicalDiskEntry .1.3.6.1.4.1.9600.1.2.61 |
physicalDiskEntryPerformance information for one particular instance of 'PhysicalDisk' object. PhysicalDiskEntry .1.3.6.1.4.1.9600.1.2.61.1 |
pDiskInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.61.1.1 |
pDiskPercentDiskReadTime% Disk Read Time is the percentage of elapsed time that the selected disk drive is busy servicing read requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.2 |
pDiskPercentDiskTime% Disk Time is the percentage of elapsed time that the selected disk drive is busy servicing read or write requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.3 |
pDiskPercentDiskWriteTime% Disk Write Time is the percentage of elapsed time that the selected disk drive is busy servicing write requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.4 |
pDiskPercentIdleTime% Idle Time reports the percentage of time during the sample interval that the disk was idle.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.5 |
pDiskAvgDiskBytesPerReadAvg. Disk Bytes/Read is the average number of bytes transferred from the disk during read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.6 |
pDiskAvgDiskBytesPerTransferAvg. Disk Bytes/Transfer is the average number of bytes transferred to or from the disk during write or read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.7 |
pDiskAvgDiskBytesPerWriteAvg. Disk Bytes/Write is the average number of bytes transferred to the disk during write operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.8 |
pDiskAvgDiskQueueLengthAvg. Disk Queue Length is the average number of both read and write requests that were queued for the selected disk during the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.9 |
pDiskAvgDiskReadQueueLengthAvg. Disk Read Queue Length is the average number of read requests that were queued for the selected disk during the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.10 |
pDiskAvgDiskWriteQueueLengthAvg. Disk Write Queue Length is the average number of write requests that were queued for the selected disk during the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.11 |
pDiskAvgDiskSecPerReadAvg. Disk sec/Read is the average time in seconds of a read of data from the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.12 |
pDiskAvgDiskSecPerTransferAvg. Disk sec/Transfer is the time in seconds of the average disk transfer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.13 |
pDiskAvgDiskSecPerWriteAvg. Disk sec/Write is the average time in seconds of a write of data to the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.14 |
pDiskCurrentDiskQueueLengthCurrent Disk Queue Length is the number of requests outstanding on the disk at the time the performance data is collected. It includes requests in service at the time of the snapshot. This is an instantaneous length, not an average over the time interval. Multi-spindle disk devices can have multiple requests active at one time, but other concurrent requests are awaiting service. This counter might reflect a transitory high or low queue length, but if there is a sustained load on the disk drive, it is likely that this will be consistently high. Requests are experiencing delays proportional to the length of this queue minus the number of spindles on the disks. This difference should average less than 2 for good performance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.15 |
pDiskDiskBytesPerSecDisk Bytes/sec is the rate bytes are transferred to or from the disk during write or read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.16 |
pDiskDiskReadBytesPerSecDisk Read Bytes/sec is the rate bytes are transferred from the disk during read operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.17 |
pDiskDiskReadsPerSecDisk Reads/sec is the rate of read operations on the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.18 |
pDiskDiskTransfersPerSecDisk Transfers/sec is the rate of read and write operations on the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.19 |
pDiskDiskWriteBytesPerSecDisk Write Bytes is rate bytes are transferred to the disk during write operations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.20 |
pDiskDiskWritesPerSecDisk Writes/sec is the rate of write operations on the disk.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.21 |
pDiskSplitIOPerSecSplit IO/Sec reports the rate that I/Os to the disk were split into multiple I/Os. A split I/O may result from requesting data in a size that is too large to fit into a single I/O or that the disk is fragmented.ro Gauge32 .1.3.6.1.4.1.9600.1.2.61.1.22 |
pop3Service OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.62 |
pop3SvcBytesReceivePerSecBytes received per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.62.1 |
pop3SvcBytesTransmittedPerSecBytes transmitted per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.62.2 |
pop3SvcConnectionsPerSecNumber of connections per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.62.3 |
pop3SvcFreeThreadsNumber of free threadsro Gauge32 .1.3.6.1.4.1.9600.1.2.62.4 |
pop3SvcMailboxesInAuthStateNumber of connections in Authentication statero Gauge32 .1.3.6.1.4.1.9600.1.2.62.5 |
pop3SvcMailboxesInTranStateNumber of connections in Transaction statero Gauge32 .1.3.6.1.4.1.9600.1.2.62.6 |
pop3SvcMessagesDeliveredPerSecNumber of messages delivered per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.62.7 |
pop3SvcSocketsInUseNumber of current active POP3 connectionsro Gauge32 .1.3.6.1.4.1.9600.1.2.62.8 |
pop3SvcTotalConnectionsTotal connections since the service starts.ro Gauge32 .1.3.6.1.4.1.9600.1.2.62.9 |
pop3SvcTotalFailedLogonsNumber of failed logons since service startsro Gauge32 .1.3.6.1.4.1.9600.1.2.62.10 |
pop3SvcTotalBytesReceivedTotal bytes of POP3 request receivedro Gauge32 .1.3.6.1.4.1.9600.1.2.62.11 |
pop3SvcTotalBytesTransmittedBytes of POP3 messages transmittedro Gauge32 .1.3.6.1.4.1.9600.1.2.62.12 |
pop3SvcTotalMessagesDeliveredTotal number of messages delivered since service startsro Gauge32 .1.3.6.1.4.1.9600.1.2.62.13 |
printQueueTableWindows 2000 printing features provide the Print Queue Object performance object for tracking activity in the server print queue. Its counters are reset when either the print server or the spooler service is restarted. SEQUENCE OF PrintQueueEntry .1.3.6.1.4.1.9600.1.2.63 |
printQueueEntryPerformance information for one particular instance of 'Print Queue' object. PrintQueueEntry .1.3.6.1.4.1.9600.1.2.63.1 |
printQueueInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.63.1.1 |
printQueueAddNetworkPrinterCallsTotal number of calls from other print servers to add shared network printers to this server since last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.2 |
printQueueBytesPrintedPerSecNumber of bytes per second printed on a print queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.3 |
printQueueEnumNetworkPrinterCallTotal number of calls from browse clients to this print server to request network browse lists since last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.4 |
printQueueJobErrorsTotal number of job errors in a print queue since last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.5 |
printQueueJobsCurrent number of jobs in a print queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.6 |
printQueueJobsSpoolingCurrent number of spooling jobs in a print queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.7 |
printQueueMaxJobsSpoolingMaximum number of spooling jobs in a print queue since last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.8 |
printQueueMaxReferencesPeak number of references (open handles) to this printer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.9 |
printQueueNotReadyErrorsTotal number of printer not ready errors in a print queue since the last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.10 |
printQueueOutOfPaperErrorsTotal number of out of paper errors in a print queue since the last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.11 |
printQueueReferencesCurrent number of references (open handles) to this printer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.12 |
printQueueTotalJobsPrintedTotal number of jobs printed on a print queue since the last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.13 |
printQueueTotalPagesPrintedTotal number of pages printed through GDI on a print queue since the last restart.ro Gauge32 .1.3.6.1.4.1.9600.1.2.63.1.14 |
processTableThe Process performance object consists of counters that monitor running application program and system processes. All the threads in a process share the same address space and have access to the same data. SEQUENCE OF ProcessEntry .1.3.6.1.4.1.9600.1.2.64 |
processEntryPerformance information for one particular instance of 'Process' object. ProcessEntry .1.3.6.1.4.1.9600.1.2.64.1 |
processInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.64.1.1 |
processPercentPrivilegedTime% Privileged Time is the percentage of elapsed time that the threads of the process have spent executing code in privileged mode. When a Windows NT system service is called, the service will often run in Privileged Mode to gain access to system-private data. Such data is protected from access by threads executing in user Mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.2 |
processPercentProcessorTime% Processor Time is the percentage of elapsed time that all of the threads of this process used the processor to execute instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count. On Multi-processor machines the maximum value of the counter is 100 % times the number of processors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.3 |
processPercentUserTime% User Time is the percentage of elapsed time that this process' threads have spent executing code in user mode. Applications, environment subsystems and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows NT Executive, Kernel, and device drivers. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.4 |
processCreatingProcessIDThe Creating Process ID value is the Process ID of the process that created the process. Note that the creating process may have terminated since this process was created and so this value may no longer identify a running process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.5 |
processElapsedTimeThe total elapsed time (in seconds) this process has been running.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.6 |
processHandleCountThe total number of handles currently open by this process. This number is the sum of the handles currently open by each thread in this process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.7 |
processIDProcessID Process is the unique identifier of this process. ID Process numbers are reused, so they only identify a process for the lifetime of that process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.8 |
processIODataBytesPerSecThe rate the process is reading and writing bytes in I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.9 |
processIODataOperationsPerSecThe rate the process is issuing read and write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.10 |
processIOOtherBytesPerSecThe rate the process is issuing bytes to I/O operations that don't involve data such as control operations. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.11 |
processIOOtherOperationsPerSecThe rate the process is issuing I/O operations that are neither a read or a write operation. An example of this type of operation would be a control function. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.12 |
processIOReadBytesPerSecThe rate the process is reading bytes from I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.13 |
processIOReadOperationsPerSecThe rate the process is issuing read I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.14 |
processIOWriteBytesPerSecThe rate the process is writing bytes to I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.15 |
processIOWriteOperationsPerSecThe rate the process is issuing write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/O's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.16 |
processPageFaultsPerSecPage Faults/sec is the rate Page Faults occur in the threads executing in this process. A page fault occurs when a thread refers to a virtual memory page that is not in its working set in main memory. This will not cause the page to be fetched from disk if it is on the standby list and hence already in main memory, or if it is in use by another process with whom the page is shared.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.17 |
processPageFileBytesPage File Bytes is the current number of bytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.18 |
processPageFileBytesPeakPage File Bytes Peak is the maximum number of bytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.19 |
processPoolNonpagedBytesPool Nonpaged Bytes is the number of bytes in the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory: Pool Nonpaged Bytes is calculated differently than Process: Pool Nonpaged Bytes, so it might not equal Process: Pool Nonpaged Bytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.20 |
processPoolPagedBytesPool Paged Bytes is the number of bytes in the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory: Pool Paged Bytes is calculated differently than Process: Pool Paged Bytes, so it might not equal Process: Pool Paged Bytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.21 |
processPriorityBaseThe current base priority of this process. Threads within a process can raise and lower their own base priority relative to the process' base priority.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.22 |
processPrivateBytesPrivate Bytes is the current number of bytes this process has allocated that cannot be shared with other processes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.23 |
processThreadCountThe number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.24 |
processVirtualBytesVirtual Bytes is the current size in bytes of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and by using too much, the process can limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.25 |
processVirtualBytesPeakVirtual Bytes Peak is the maximum number of bytes of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is however finite, and by using too much, the process might limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.26 |
processWorkingSetWorking Set is the current number of bytes in the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.27 |
processWorkingSetPeakWorking Set Peak is the maximum number of bytes in the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.28 |
processPageFileKBytesPage File KiloBytes is the current number of kilobytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.29 |
processPageFileKBytesPeakPage File KiloBytes Peak is the maximum number of kilobytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.30 |
processPoolNonpagedKBytesPool Nonpaged KiloBytes is the number of kilobytes in the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory: Pool Nonpaged KiloBytes is calculated differently than Process: Pool Nonpaged KiloBytes, so it might not equal Process: Pool Nonpaged KiloBytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.31 |
processPoolPagedKBytesPool Paged KiloBytes is the number of kilobytes in the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory: Pool Paged KiloBytes is calculated differently than Process: Pool Paged KiloBytes, so it might not equal Process: Pool Paged KiloBytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.32 |
processPrivateKBytesPrivate KiloBytes is the current number of kilobytes this process has allocated that cannot be shared with other processes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.33 |
processVirtualKBytesVirtual KiloBytes is the current size in kilobytes of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and by using too much, the process can limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.34 |
processVirtualKBytesPeakVirtual KiloBytes Peak is the maximum number of kilobytes of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is however finite, and by using too much, the process might limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.35 |
processWorkingSetKBytesWorking Set is the current number of kilobytes in the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.36 |
processWorkingSetKBytesPeakWorking Set Peak is the maximum number of kilobytes in the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.37 |
processPageFileMBytesPage File MegaBytes is the current number of megabytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.38 |
processPageFileMBytesPeakPage File MegaBytes Peak is the maximum number of megabytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.39 |
processPoolNonpagedMBytesPool Nonpaged MegaBytes is the number of megabytes in the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory: Pool Nonpaged MegaBytes is calculated differently than Process: Pool Nonpaged MegaBytes, so it might not equal Process: Pool Nonpaged MegaBytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.40 |
processPoolPagedMBytesPool Paged MegaBytes is the number of megabytes in the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory: Pool Paged MegaBytes is calculated differently than Process: Pool Paged MegaBytes, so it might not equal Process: Pool Paged MegaBytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.41 |
processPrivateMBytesPrivate MegaBytes is the current number of megabytes this process has allocated that cannot be shared with other processes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.42 |
processVirtualMBytesVirtual MegaBytes is the current size in megabytes of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and by using too much, the process can limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.43 |
processVirtualMBytesPeakVirtual MegaBytes Peak is the maximum number of megabytes of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is however finite, and by using too much, the process might limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.44 |
processWorkingSetMBytesWorking Set is the current number of megabytes in the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.45 |
processWorkingSetMBytesPeakWorking Set Peak is the maximum number of megabytes in the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.64.1.46 |
processorTableThe Processor performance object consists of counters that measure aspects of processor activity. The processor is the part of the computer that performs arithmetic and logical computations, initiates operations on peripherals, and runs the threads of processes. A computer can have multiple processors. The processor object represents each processor as an instance of the object. SEQUENCE OF ProcessorEntry .1.3.6.1.4.1.9600.1.2.65 |
processorEntryPerformance information for one particular instance of 'Processor' object. ProcessorEntry .1.3.6.1.4.1.9600.1.2.65.1 |
cpuInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.65.1.1 |
cpuPercentC1Time% C1 Time is the percentage of time the processor spends in the C1 low-power idle state. % C1 Time is a subset of the total processor idle time. C1 low-power idle state enables the processor to maintain its entire context and quickly return to the running state. Not all systems support the % C1 state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.2 |
cpuPercentC2Time% C2 Time is the percentage of time the processor spends in the C2 low-power idle state. % C2 Time is a subset of the total processor idle time. C2 low-power idle state enables the processor to maintain the context of the system caches. The C2 power state is a lower power and higher exit latency state than C1. Not all systems support the C2 state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.3 |
cpuPercentC3Time% C3 Time is the percentage of time the processor spends in the C3 low-power idle state. % C3 Time is a subset of the total processor idle time. When the processor is in the C3 low-power idle state it is unable to maintain the coherency of its caches. The C3 power state is a lower power and higher exit latency state than C2. Not all systems support the C3 state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.4 |
cpuPercentDPCTime% DPC Time is the percentage of time that the processor spent receiving and servicing deferred procedure calls (DPCs) during the sample interval. DPCs are interrupts that run at a lower priority than standard interrupts. % DPC Time is a component of % Privileged Time because DPCs are executed in privileged mode. They are counted separately and are not a component of the interrupt counters. This counter displays the average busy time as a percentage of the sample time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.5 |
cpuPercentIdleTime% Idle Time is the percentage of time the processor is idle during the sample intervalro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.6 |
cpuPercentInterruptTime% Interrupt Time is the time the processor spends receiving and servicing hardware interrupts during sample intervals. This value is an indirect indicator of the activity of devices that generate interrupts, such as the system clock, the mouse, disk drivers, data communication lines, network interface cards and other peripheral devices. These devices normally interrupt the processor when they have completed a task or require attention. Normal thread execution is suspended during interrupts. Most system clocks interrupt the processor every 10 milliseconds, creating a background of interrupt activity. suspends normal thread execution during interrupts. This counter displays the average busy time as a percentage of the sample time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.7 |
cpuPercentPrivilegedTime% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service in called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.8 |
cpuPercentProcessorTime% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the duration of the idle thread is active in the sample interval, and subtracting that time from interval duration. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It is calculated by monitoring the time that the service is inactive, and subtracting that value from 100%.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.9 |
cpuPercentUserTime% User Time is the percentage of elapsed time the processor spends in the user mode. User mode is a restricted processing mode designed for applications, environment subsystems, and integral subsystems. The alternative, privileged mode, is designed for operating system components and allows direct access to hardware and all memory. The operating system switches application threads to privileged mode to access operating system services. This counter displays the average busy time as a percentage of the sample time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.10 |
cpuC1TransitionsPerSecC1 Transitions/sec is the rate that the CPU enters the C1 low-power idle state. The CPU enters the C1 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.11 |
cpuC2TransitionsPerSecC2 Transitions/sec is the rate that the CPU enters the C2 low-power idle state. The CPU enters the C2 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.12 |
cpuC3TransitionsPerSecC3 Transitions/sec is the rate that the CPU enters the C3 low-power idle state. The CPU enters the C3 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.13 |
cpuDPCRateDPC Rate is the rate at which deferred procedure calls (DPCs) were added to the processors DPC queues between the timer ticks of the processor clock. DPCs are interrupts that run at alower priority than standard interrupts. Each processor has its own DPC queue. This counter measures the rate that DPCs were added to the queue, not the number of DPCs in the queue. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.14 |
cpuDPCsQueuedPerSecDPCs Queued/sec is the average rate, in incidents per second, at which deferred procedure calls (DPCs) were added to the processor's DPC queue. DPCs are interrupts that run at a lower priority than standard interrupts. Each processor has its own DPC queue. This counter measures the rate that DPCs are added to the queue, not the number of DPCs in the queue. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.15 |
cpuInterruptsPerSecInterrupts/sec is the average rate, in incidents per second, at which the processor received and serviced hardware interrupts. It does not include deferred procedure calls (DPCs), which are counted separately. This value is an indirect indicator of the activity of devices that generate interrupts, such as the system clock, the mouse, disk drivers, data communication lines, network interface cards, and other peripheral devices. These devices normally interrupt the processor when they have completed a task or require attention. Normal thread execution is suspended. The system clock typically interrupts the processor every 10 milliseconds, creating a background of interrupt activity. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.65.1.16 |
pSchedFlowTableThe PSched Flow Object shows statistics from the packet scheduler, a feature of QoS Admission Control. SEQUENCE OF PSchedFlowEntry .1.3.6.1.4.1.9600.1.2.66 |
pSchedFlowEntryPerformance information for one particular instance of 'PSched Flow' object. PSchedFlowEntry .1.3.6.1.4.1.9600.1.2.66.1 |
pSchedFlowInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.66.1.1 |
pSchedFlowAveragePktsInNetcardShows the average number of packets that have been queued in the network adapter by this flow.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.2 |
pSchedFlowAveragePktsInSequencerShows the average number of packets in the sequencer over the last sampling period.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.3 |
pSchedFlowAveragePktsInShaperShows the average number of packets in the scheduler over the last sampling period.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.4 |
pSchedFlowBytesScheduledShows the number of bytes that were scheduled in some way (rather than just being directly sent to the underlying miniport).ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.5 |
pSchedFlowBytesScheduledPerSecShows the number of packets per second from this flow that have been scheduled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.6 |
pSchedFlowBytesTransmittedShows the number of bytes from this flow that have been sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.7 |
pSchedFlowBytesTransmittedPerSecShows the number of bytes per second from this flow that have been sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.8 |
pSchedFlowMaxPktsInSequencerShows the maximum number of packets that have ever simultaneously been in the sequencer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.9 |
pSchedFlowMaxPktsInShaperShows the maximum number of packets that have ever simultaneously been in the scheduler.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.10 |
pSchedFlowMaximumPktsInNetcardShows the maximum number of packets that have been queued in the network adapter by this flow.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.11 |
pSchedFlowNonconfPktsSchedShows the number of packets that have entered the packet scheduler at a rate which exceeded the flow parameters.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.12 |
pSchedFlowNonconfPktsSchedPerSecShows the rate at which nonconforming packets have entered the packet scheduler.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.13 |
pSchedFlowNonconfPktsXmitdShows the number of packets that have been sent by the packet scheduler at a rate which exceeded the flow parameters.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.14 |
pSchedFlowNonconfPktsXmitdPerSecShows the rate at which nonconforming packets have been sent by the packet scheduler.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.15 |
pSchedFlowPktsDroppedShows the number of packets dropped by the packet scheduler.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.16 |
pSchedFlowPktsDroppedPerSecShows the number of packets that were dropped by the packet scheduler from this flow per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.17 |
pSchedFlowPktsScheduledShows the number of packets that were scheduled in some way (rather than just being directly sent to the underlying miniport).ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.18 |
pSchedFlowPktsScheduledPerSecShows the number of packets per second from this flow that have been scheduled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.19 |
pSchedFlowPktsTransmittedShows the number of bytes from this flow that have been sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.20 |
pSchedFlowPktsTransmittedPerSecShows the number of packets per second from this flow that have been sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.66.1.21 |
pSchedPipeTableThe PSched Pipe Object performance object reports statistics from the packet scheduler, a feature of QoS Admission Control. SEQUENCE OF PSchedPipeEntry .1.3.6.1.4.1.9600.1.2.67 |
pSchedPipeEntryPerformance information for one particular instance of 'PSched Pipe' object. PSchedPipeEntry .1.3.6.1.4.1.9600.1.2.67.1 |
pSchedPipeInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.67.1.1 |
pSchedPipeAvgPacketsInNetcardThe average number of packets in the network card over the last sampling periodro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.2 |
pSchedPipeAvgPacketsInSequencerThe average number of packets in the sequencer over the last sampling periodro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.3 |
pSchedPipeAvgPacketsInShaperThe average number of packets in the shaper over the last sampling periodro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.4 |
pSchedPipeFlowModsRejectedThe number of times a flow modification has been rejectedro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.5 |
pSchedPipeFlowsClosedThe number of flows that have been closedro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.6 |
pSchedPipeFlowsModifiedThe of times a flow has been modifiedro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.7 |
pSchedPipeFlowsOpenedThe number of flows opened on this pipe (some of which may now be closed)ro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.8 |
pSchedPipeFlowsRejectedThe number of flow creations that were rejectedro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.9 |
pSchedPipeMaxPacketsInNetcardThe maximum number of packets ever simultaneously in the network cardro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.10 |
pSchedPipeMaxPacketsInSequencerThe maximum number of packets that have ever simultaneously been in the sequencerro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.11 |
pSchedPipeMaxPacketsInShaperThe maximum number of packets that have ever simultaneously been in the shaperro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.12 |
pSchedPipeMaxSimultaneousFlowsThe maximum number of flows that have been simultaneously open on this pipero Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.13 |
pSchedPipeBadPacketsSchedThe number of packets that have entered the packet scheduler at a rate which exceeded that packet's flow parametersro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.14 |
pSchedPipeBadPacketsSchedPerSecThe rate at which nonconforming packets have entered the packet schedulerro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.15 |
pSchedPipeBadPacketsXmitedThe number of packets that have been sent by the packet scheduler at a rate which exceeded that packet's flow parametersro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.16 |
pSchedPipeBadPacketsXmitedPerSecThe rate at which nonconforming packets have been sent by the packet schedulerro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.17 |
pSchedPipeOutOfPacketsThe number of times PSched has been unable to allocate a packetro Gauge32 .1.3.6.1.4.1.9600.1.2.67.1.18 |
rasTotalThe RAS Total performance object consists of counters that combine values for all ports of the Remote Access Service (RAS) device on the computer. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.68 |
rasTotalAlignmentErrorsThe total number of Alignment Errors for this connection. Alignment Errors occur when a byte received is different from the byte expected.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.1 |
rasTotalBufferOverrunErrorsThe total number of Buffer Overrun Errors for this connection. Buffer Overrun Errors when the software cannot handle the rate at which data is received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.2 |
rasTotalBytesReceivedThe number of bytes received total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.3 |
rasTotalBytesReceivedPerSecThe number of bytes received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.4 |
rasTotalBytesTransmittedThe number of bytes transmitted total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.5 |
rasTotalBytesTransmittedPerSecThe number of bytes transmitted per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.6 |
rasTotalCRCErrorsThe total number of CRC Errors for this connection. CRC Errors occur when the frame received contains erroneous data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.7 |
rasTotalFramesReceivedThe number of data frames received total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.8 |
rasTotalFramesReceivedPerSecThe number of frames received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.9 |
rasTotalFramesTransmittedThe number of data frames transmitted total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.10 |
rasTotalFramesTransmittedPerSecThe number of frames transmitted per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.11 |
rasTotalPercentCompressionInThe compression ratio for bytes being received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.12 |
rasTotalPercentCompressionOutThe compression ratio for bytes being transmitted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.13 |
rasTotalSerialOverrunErrorsThe total number of Serial Overrun Errors for this connection. Serial Overrun Errors occur when the hardware cannot handle the rate at which data is received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.14 |
rasTotalTimeoutErrorsThe total number of Timeout Errors for this connection. Timeout Errors occur when an expected is not received in time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.15 |
rasTotalTotalConnectionsThe total number of Remote Access connections.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.16 |
rasTotalTotalErrorsThe total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.17 |
rasTotalTotalErrorsPerSecThe total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.68.18 |
rasPortTableThe RAS Port performance object consists of counters that monitor individual Remote Access Service (RAS) ports of the RAS device on the system. SEQUENCE OF RASPortEntry .1.3.6.1.4.1.9600.1.2.69 |
rasPortEntryPerformance information for one particular instance of 'RAS Port' object. RASPortEntry .1.3.6.1.4.1.9600.1.2.69.1 |
rasPortInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.69.1.1 |
rasPortAlignmentErrorsThe total number of Alignment Errors for this connection. Alignment Errors occur when a byte received is different from the byte expected.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.2 |
rasPortBufferOverrunErrorsThe total number of Buffer Overrun Errors for this connection. Buffer Overrun Errors when the software cannot handle the rate at which data is received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.3 |
rasPortBytesReceivedThe number of bytes received total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.4 |
rasPortBytesReceivedPerSecThe number of bytes received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.5 |
rasPortBytesTransmittedThe number of bytes transmitted total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.6 |
rasPortBytesTransmittedPerSecThe number of bytes transmitted per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.7 |
rasPortCRCErrorsThe total number of CRC Errors for this connection. CRC Errors occur when the frame received contains erroneous data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.8 |
rasPortFramesReceivedThe number of data frames received total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.9 |
rasPortFramesReceivedPerSecThe number of frames received per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.10 |
rasPortFramesTransmittedThe number of data frames transmitted total for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.11 |
rasPortFramesTransmittedPerSecThe number of frames transmitted per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.12 |
rasPortPercentCompressionInThe compression ratio for bytes being received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.13 |
rasPortPercentCompressionOutThe compression ratio for bytes being transmitted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.14 |
rasPortSerialOverrunErrorsThe total number of Serial Overrun Errors for this connection. Serial Overrun Errors occur when the hardware cannot handle the rate at which data is received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.15 |
rasPortTimeoutErrorsThe total number of Timeout Errors for this connection. Timeout Errors occur when an expected is not received in time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.16 |
rasPortTotalErrorsThe total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors for this connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.17 |
rasPortTotalErrorsPerSecThe total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.69.1.18 |
redirectorThe Redirector performance object consists of counters that monitor network connections originating at the local computer. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.70 |
redirBytesReceivedPerSecBytes Received/sec is the rate of bytes coming in to the Redirector from the network. It includes all application data as well as network protocol information (such as packet headers).ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.1 |
redirBytesTotalPerSecBytes Total/sec is the rate the Redirector is processing data bytes. This includes all application and file data in addition to protocol information such as packet headers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.2 |
redirBytesTransmittedPerSecBytes Transmitted/sec is the rate at which bytes are leaving the Redirector to the network. It includes all application data as well as network protocol information (such as packet headers and the like).ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.3 |
redirConnectsCoreConnects Core counts the number of connections you have to servers running the original MS-Net SMB protocol, including MS-Net itself and Xenix and VAX's.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.4 |
redirConnectsLanManager20Connects LAN Manager 2.0 counts connections to LAN Manager 2.0 servers, including LMX servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.5 |
redirConnectsLanManager21Connects LAN Manager 2.1 counts connections to LAN Manager 2.1 servers, including LMX servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.6 |
redirConnectsWindowsNTConnects Windows NT counts the connections to Windows NT computers. Good choice!ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.7 |
redirCurrentCommandsCurrent Commands counts the number of requests to the Redirector that are currently queued for service. If this number is much larger than the number of network adapter cards installed in the computer, then the network(s) and/or the server(s) being accessed are seriously bottlenecked.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.8 |
redirFileDataOperationsPerSecFile Data Operations/sec is the rate the Redirector is processing data operations. One operation includes (hopefully) many bytes. We say hopefully here because each operation has overhead. You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.9 |
redirFileReadOperationsPerSecFile Read Operations/sec is the rate at which applications are asking the Redirector for data. Each call to a file system or similar Application Program Interface (API) call counts as one operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.10 |
redirFileWriteOperationsPerSecFile Write Operations/sec is the rate at which applications are sending data to the Redirector. Each call to a file system or similar Application Program Interface (API) call counts as one operation.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.11 |
redirNetworkErrorsPerSecNetwork Errors/sec counts serious unexpected errors that generally indicate the Redirector and one or more Servers are having serious communication difficulties. For example an SMB (Server Manager Block) protocol error will generate a Network Error. These result in an entry in the system Event Log, so look there for details.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.12 |
redirPacketsReceivedPerSecPackets Received/sec is the rate at which the Redirector is receiving packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes received in a packet can be obtained by dividing Bytes Received/sec by this counter. Some packets received might not contain incoming data, for example an acknowledgment to a write made by the Redirector would count as an incoming packet.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.13 |
redirPacketsTransmittedPerSecPackets Transmitted/sec is the rate at which the Redirector is sending packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes transmitted in a packet can be obtained by dividing Bytes Transmitted/sec by this counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.14 |
redirPacketsPerSecPackets/sec is the rate the Redirector is processing data packets. One packet includes (hopefully) many bytes. We say hopefully here because each packet has protocol overhead. You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/packet. You can also divide this counter by Operations/sec to determine the average number of packets per operation, another measure of efficiency.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.15 |
redirReadBytesCachePerSecRead Bytes Cache/sec is the rate at which applications are accessing the file system cache by using the Redirector. Some of these data requests are satisfied by retrieving the data from the cache. Requests that miss the Cache cause a page fault (see Read Bytes Paging/sec).ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.16 |
redirReadBytesNetworkPerSecRead Bytes Network/sec is the rate at which applications are reading data across the network. This occurs when data sought in the file system cache is not found there and must be retrieved from the network. Dividing this value by Bytes Received/sec indicates the proportion of application data traveling across the network. (see Bytes Received/sec).ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.17 |
redirReadBytesNonPagingPerSecRead Bytes Non-Paging/sec are those bytes read by the Redirector in response to normal file requests by an application when they are redirected to come from another computer. In addition to file requests, this counter includes other methods of reading across the network such as Named Pipes and Transactions. This counter does not count network protocol information, just application data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.18 |
redirReadBytesPagingPerSecRead Bytes Paging/sec is the rate at which the Redirector is attempting to read bytes in response to page faults. Page faults are caused by loading of modules (such as programs and libraries), by a miss in the Cache (see Read Bytes Cache/sec), or by files directly mapped into the address space of applications (a high-performance feature of Windows NT).ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.19 |
redirReadOperationsRandomPerSecRead Operations Random/sec counts the rate at which, on a file-by-file basis, reads are made that are not sequential. If a read is made using a particular file handle, and then is followed by another read that is not immediately the contiguous next byte, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.20 |
redirReadPacketsSmallPerSecRead Packets Small/sec is the rate at which reads less than one-fourth of the server's negotiated buffer size are made by applications. Too many of these could indicate a waste of buffers on the server. This counter is incremented once for each read. It does not count packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.21 |
redirReadPacketsPerSecRead Packets/sec is the rate at which read packets are being placed on the network. Each time a single packet is sent with a request to read data remotely, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.22 |
redirReadsDeniedPerSecReads Denied/sec is the rate at which the server is unable to accommodate requests for Raw Reads. When a read is much larger than the server's negotiated buffer size, the Redirector requests a Raw Read which, if granted, would permit the transfer of the data without lots of protocol overhead on each packet. To accomplish this the server must lock out other requests, so the request is denied if the server is really busy.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.23 |
redirReadsLargePerSecReads Large/sec is the rate at which reads over 2 times the server's negotiated buffer size are made by applications. Too many of these could place a strain on server resources. This counter is incremented once for each read. It does not count packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.24 |
redirServerDisconnectsServer Disconnects counts the number of times a Server has disconnected your Redirector. See also Server Reconnects.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.25 |
redirServerReconnectsServer Reconnects counts the number of times your Redirector has had to reconnect to a server in order to complete a new active request. You can be disconnected by the Server if you remain inactive for too long. Locally even if all your remote files are closed, the Redirector will keep your connections intact for (nominally) ten minutes. Such inactive connections are called Dormant Connections. Reconnecting is expensive in time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.26 |
redirServerSessionsServer Sessions counts the total number of security objects the Redirector has managed. For example, a logon to a server followed by a network access to the same server will establish one connection, but two sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.27 |
redirServerSessionsHungServer Sessions Hung counts the number of active sessions that are timed out and unable to proceed due to a lack of response from the remote server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.28 |
redirWriteBytesCachePerSecWrite Bytes Cache/sec is the rate at which applications on your computer are writing to the file system cache by using the Redirector. The data might not leave your computer immediately; it can be retained in the cache for further modification before being written to the network. This saves network traffic. Each write of a byte into the cache is counted here.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.29 |
redirWriteBytesNetworkPerSecWrite Bytes Network/sec is the rate at which applications are writing data across the network. This occurs when the file system cache is bypassed, such as for Named Pipes or Transactions, or when the cache writes the bytes to disk to make room for other data. Dividing this counter by Bytes Transmitted/sec will indicate the proportion of application data being to the network (see Transmitted Bytes/sec).ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.30 |
redirWriteBytesNonPagingPerSecWrite Bytes Non-Paging/sec is the rate at which bytes are written by the Redirector in response to normal file outputs by an application when they are redirected to another computer. In addition to file requests, this count includes other methods of writing across the network, such as Named Pipes and Transactions. This counter does not count network protocol information, just application data.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.31 |
redirWriteBytesPagingPerSecWrite Bytes Paging/sec is the rate at which the Redirector is attempting to write bytes changed in the pages being used by applications. The program data changed by modules (such as programs and libraries) that were loaded over the network are 'paged out' when no longer needed. Other output pages come from the file system cache (see Write Bytes Cache/sec).ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.32 |
redirWriteOperationsRandomPerSecWrite Operations Random/sec is the rate at which, on a file-by-file basis, writes are made that are not sequential. If a write is made using a particular file handle, and then is followed by another write that is not immediately the next contiguous byte, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.33 |
redirWritePacketsSmallPerSecWrite Packets Small/sec is the rate at which writes are made by applications that are less than one-fourth of the server's negotiated buffer size. Too many of these could indicate a waste of buffers on the server. This counter is incremented once for each write: it counts writes, not packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.34 |
redirWritePacketsPerSecWrite Packets/sec is the rate at which writes are being sent to the network. Each time a single packet is sent with a request to write remote data, this counter is incremented by one.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.35 |
redirWritesDeniedPerSecWrites Denied/sec is the rate at which the server is unable to accommodate requests for Raw Writes. When a write is much larger than the server's negotiated buffer size, the Redirector requests a Raw Write which, if granted, would permit the transfer of the data without lots of protocol overhead on each packet. To accomplish this the server must lock out other requests, so the request is denied if the server is really busy.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.36 |
redirWritesLargePerSecWrites Large/sec is the rate at which writes are made by applications that are over 2 times the server's negotiated buffer size. Too many of these could place a strain on server resources. This counter is incremented once for each write: it counts writes, not packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.70.37 |
rsvpInterfacesTableACS/RSVP Interfaces performance object counters report statistics about RSVP activity, flow, bandwidth, RSVP messages sent, and so on. The ACS/RSVP Interfaces object is available if ACS is running and there is an object for each IP address on the system. SEQUENCE OF RSVPInterfacesEntry .1.3.6.1.4.1.9600.1.2.71 |
rsvpInterfacesEntryPerformance information for one particular instance of 'RSVP Interfaces' object. RSVPInterfacesEntry .1.3.6.1.4.1.9600.1.2.71.1 |
rsvpIfInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.71.1.1 |
rsvpIfBlockedRESVsShows the number of blockaded reservations that failed due to failed reservations that have not been removed from this node. For more information about blockade states, see RFC 2205.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.2 |
rsvpIfGeneralFailuresShows the total number of non-admission control errors that have occurred on this interface. For more information about the other traffic control failures, see RFC 2205.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.3 |
rsvpIfMaximumAdmittedBandwidthShows the highest amount of allocated bandwidth admitted on the interface during the period in which the ACS has been running.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.4 |
rsvpIfNumOfActiveFlowsShows the number of reserved flows that are currently installed and maintained by RSVP on this interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.5 |
rsvpIfNumOfIncomingMsgsDroppedNumber of incoming messages dropped due to badly constructed RSVP objects etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.6 |
rsvpIfNumOfOutgoingMsgsDroppedNumber of outgoing messages droppedro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.7 |
rsvpIfPATHERRMsgsReceivedShows the total number of PATH error messages received on this interface. This number indicates the number of times that a PATH has been rejected by a remote host.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.8 |
rsvpIfPATHERRMsgsSentShows the total number of PATH ERR messages that were sent by the ACS/RSVP service rejecting incoming PATH messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.9 |
rsvpIfPATHTEARMsgsReceivedShows the total number of PATH TEAR messages that have been received on the interface. A PATH-TEAR message removes the PATH state along the route.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.10 |
rsvpIfPATHTEARMsgsSentShows the total number of PATH TEAR messages that were sent on the interface to tear down an RSVP PATH state in the network. A PATH-ERR messages indicates an error in response to the PATH message.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.11 |
rsvpIfPATHMsgsReceivedShows the total number of PATH messages that have been received on this interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.12 |
rsvpIfPATHMsgsSentShows the total number of PATH messages that were sent by the ACS/RSVP service on this the interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.13 |
rsvpIfPATHStateBlockTimeoutsShows the total number of times that the RSVP PATH state timed out. This happens when no PATH messages are received within the designated timeout period. This error message can be caused by a route change.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.14 |
rsvpIfPolicyControlFailuresShows the total number of RSVP requests that are not admitted on this interface due to a conflict with policy settings.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.15 |
rsvpIfRESVCONFIRMMsgsReceivedShows the total number of RESV CONFIRM messages that have been received by the interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.16 |
rsvpIfRESVCONFIRMMsgsSentShows the total number of RESV CONFIRM messages that were sent on this interface in response to RESV messages sent from remote hosts.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.17 |
rsvpIfRESVERRMsgsReceivedShows the total number of RESV ERR messages that were sent on this interface by the ACS/RSVP service. rejecting incoming RESV messages. A RESV-ERR message indicates an error in response to the RESV.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.18 |
rsvpIfRESVERRMsgsSentShows the total number of RESV errors that were sent on this interface. This number indicates how many reservations have been rejected by the network.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.19 |
rsvpIfRESVTEARMsgsReceivedShows the total number of RESV TEAR messages that have been received on the interface. A RESV-TEAR message removes the reservation along the route.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.20 |
rsvpIfRESVTEARMsgsSentShows the total number of RESV TEAR messages that were sent on the interface to tear down a RESV state in the network.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.21 |
rsvpIfRESVMsgsReceivedShows the total number of RESV messages that have been received on this interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.22 |
rsvpIfRESVMsgsSentShows the total number of RESV messages that were sent by the ACS/RSVP service sent on this the interfacero Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.23 |
rsvpIfRESVStateBlockTimeoutsShows the total number of times that the RSVP RESV state timed out. This happens when no RESV messages are received within the designated timeout period. This error message can be caused by a route change.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.24 |
rsvpIfReceiveMsgsErrorsBigMsgsShows the total number of outgoing RSVP messages that were dropped because they were bigger than the maximum configured RSVP message size.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.25 |
rsvpIfReceiveMsgsErrorsNoMemoryShows the total number of outgoing RSVP messages that were dropped due to insufficient memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.26 |
rsvpIfReservedBandwidthShows the reserved bandwidth for this interface, in bits per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.27 |
rsvpIfResourceControlFailuresShows the number of reservations that failed due to the lack of resources.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.28 |
rsvpIfSendMsgsErrorsBigMsgsShows the total number of outgoing RSVP messages that were dropped because they were bigger than the maximum configured RSVP message size.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.29 |
rsvpIfSendMsgsErrorsNoMemoryShows the total number of outgoing RSVP messages that were dropped due to insufficient memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.30 |
rsvpIfSignalingBytesReceivedShows the total RSVP signaling traffic, in bytes, that have been received by the ACS/RSVP service on this interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.31 |
rsvpIfSignalingBytesSentShows the total RSVP signaling traffic, in bytes, that were sent by the ACS/RSVP service on this interface.ro Gauge32 .1.3.6.1.4.1.9600.1.2.71.1.32 |
rsvpServiceTableThe ACS/RSVP Service performance object counters report statistics about Resource Reservation Protocol (RSVP) and Quality of Service (QoS) Admission Control (ACS) activity, flow, bandwidth, RSVP messages sent, and so on. The ACS/RSVP Service object is available if QoS Admission Control is installed, even if the service is not running. SEQUENCE OF RSVPServiceEntry .1.3.6.1.4.1.9600.1.2.72 |
rsvpServiceEntryPerformance information for one particular instance of 'RSVP Service' object. RSVPServiceEntry .1.3.6.1.4.1.9600.1.2.72.1 |
rsvpSvcInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.72.1.1 |
rsvpSvcBytesInQoSNotificationsA running total of the number of bytes delivered in QoS Notifications to QoS-enabled applications.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.2 |
rsvpSvcFailedQoSRequestsThe number of QoS requests generated by QoS-enabled applications that have been rejected by the RSVP service. Failed QoS requests can be caused by invalid QoS requests.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.3 |
rsvpSvcFailedQoSSendsThe number of QoS notifications the RSVP service that could not be sent to the QoS applications. Failed QoS sends can be caused by terminated applications.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.4 |
rsvpSvcNetworkInterfacesThe number of local network interfaces visible to, and used by the RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.5 |
rsvpSvcNetworkSocketsThe total number of raw sockets opened for the purpose of RSVP signaling.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.6 |
rsvpSvcQoSClientsThe number of QoS enabled applications currently active.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.7 |
rsvpSvcQoSNotificationsThe number of QoS notifications delivered to QoS-enabled applications by the QoS RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.8 |
rsvpSvcQoSenabledReceiversIndicates the number of RESV messages sent for QoS-enabled receivers. This number increments each time a RESV is refreshed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.9 |
rsvpSvcQoSenabledSendersIndicates the number of PATH messages sent for QoS-enabled senders. This number increments each time a PATH is refreshed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.10 |
rsvpSvcRSVPSessionsThe current number of active RSVP sessions on the RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.11 |
rsvpSvcTimersThe number of timer events scheduled to take place. Shows the activity level of the RSVP service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.72.1.12 |
serverThe Server performance object consists of counters that measure communication between the local computer and the network. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.73 |
serverBlockingRequestsRejectedThe number of times the server has rejected blocking SMBs due to insufficient count of free work items. Indicates whether the MaxWorkItem or MinFreeWorkItems server parameters might need to be adjusted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.1 |
serverBytesReceivedPerSecThe number of bytes the server has received from the network. Indicates how busy the server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.2 |
serverBytesTotalPerSecThe number of bytes the server has sent to and received from the network. This value provides an overall indication of how busy the server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.3 |
serverBytesTransmittedPerSecThe number of bytes the server has sent on the network. Indicates how busy the server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.4 |
serverContextBlocksQueuedPerSecContext Blocks Queued per second is the rate at which work context blocks had to be placed on the server's FSP queue to await server action.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.5 |
serverErrorsAccessPermissionsThe number of times opens on behalf of clients have failed with STATUS_ACCESS_DENIED. Can indicate whether somebody is randomly attempting to access files in hopes of getting at something that was not properly protected.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.6 |
serverErrorsGrantedAccessThe number of times accesses to files opened successfully were denied. Can indicate attempts to access files without proper access authorization.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.7 |
serverErrorsLogonThe number of failed logon attempts to the server. Can indicate whether password guessing programs are being used to crack the security on the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.8 |
serverErrorsSystemThe number of times an internal Server Error was detected. Unexpected errors usually indicate a problem with the Server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.9 |
serverFileDirectorySearchesThe number of searches for files currently active in the server. Indicates current server activity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.10 |
serverFilesOpenThe number of files currently opened in the server. Indicates current server activity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.11 |
serverFilesOpenedTotalThe number of successful open attempts performed by the server of behalf of clients. Useful in determining the amount of file I/O, determining overhead for path-based operations, and for determining the effectiveness of open locks.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.12 |
serverLogonTotalLogon Total includes all interactive logons, network logons, service logons, successful logon, and failed logons since the machine is last rebooted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.13 |
serverLogonPerSecLogon/sec is the rate of all server logons.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.14 |
serverPoolNonpagedBytesThe number of bytes of non-pageable computer memory the server is using. This value is useful for determining the values of the MaxNonpagedMemoryUsage value entry in the Windows NT Registry.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.15 |
serverPoolNonpagedFailuresThe number of times allocations from nonpaged pool have failed. Indicates that the computer's physical memory is too small.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.16 |
serverPoolNonpagedPeakThe maximum number of bytes of nonpaged pool the server has had in use at any one point. Indicates how much physical memory the computer should have.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.17 |
serverPoolPagedBytesThe number of bytes of pageable computer memory the server is currently using. Can help in determining good values for the MaxPagedMemoryUsage parameter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.18 |
serverPoolPagedFailuresThe number of times allocations from paged pool have failed. Indicates that the computer's physical memory or paging file are too small.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.19 |
serverPoolPagedPeakThe maximum number of bytes of paged pool the server has had allocated. Indicates the proper sizes of the Page File(s) and physical memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.20 |
serverServerSessionsThe number of sessions currently active in the server. Indicates current server activity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.21 |
serverSessionsErroredOutThe number of sessions that have been closed due to unexpected error conditions or sessions that have reached the autodisconnect timeout and have been disconnected normally.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.22 |
serverSessionsForcedOffThe number of sessions that have been forced to logoff. Can indicate how many sessions were forced to logoff due to logon time constraints.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.23 |
serverSessionsLoggedOffThe number of sessions that have terminated normally. Useful in interpreting the Sessions Times Out and Sessions Errored Out statistics--allows percentage calculations.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.24 |
serverSessionsTimedOutThe number of sessions that have been closed due to their idle time exceeding the AutoDisconnect parameter for the server. Shows whether the AutoDisconnect setting is helping to conserve resources.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.25 |
serverWorkItemShortagesThe number of times STATUS_DATA_NOT_ACCEPTED was returned at receive indication time. This occurs when no work item is available or can be allocated to service the incoming request. Indicates whether the InitWorkItems or MaxWorkItems parameters might need to be adjusted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.26 |
serverPoolNonpagedKBytesThe number of kilobytes of non-pageable computer memory the server is using. This value is useful for determining the values of the MaxNonpagedMemoryUsage value entry in the Windows NT Registry.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.27 |
serverPoolNonpagedKBytesPeakThe maximum number of kilobytes of nonpaged pool the server has had in use at any one point. Indicates how much physical memory the computer should have.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.28 |
serverPoolPagedKBytesThe number of kilobytes of pageable computer memory the server is currently using. Can help in determining good values for the MaxPagedMemoryUsage parameter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.29 |
serverPoolPagedKBytesPeakThe maximum number of kilobytes of paged pool the server has had allocated. Indicates the proper sizes of the Page File(s) and physical memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.30 |
serverPoolNonpagedMBytesThe number of megabytes of non-pageable computer memory the server is using. This value is useful for determining the values of the MaxNonpagedMemoryUsage value entry in the Windows NT Registry.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.31 |
serverPoolNonpagedMBytesPeakThe maximum number of megabytes of nonpaged pool the server has had in use at any one point. Indicates how much physical memory the computer should have.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.32 |
serverPoolPagedMBytesThe number of megabytes of pageable computer memory the server is currently using. Can help in determining good values for the MaxPagedMemoryUsage parameter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.33 |
serverPoolPagedMBytesPeakThe maximum number of megabytes of paged pool the server has had allocated. Indicates the proper sizes of the Page File(s) and physical memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.73.34 |
serverWorkQueuesTableThe Server Work Queues performance object consists of counters that monitor the length of queues and objects in the queues. SEQUENCE OF ServerWorkQueuesEntry .1.3.6.1.4.1.9600.1.2.74 |
serverWorkQueuesEntryPerformance information for one particular instance of 'Server Work Queues' object. ServerWorkQueuesEntry .1.3.6.1.4.1.9600.1.2.74.1 |
swqInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.74.1.1 |
swqActiveThreadsActive Threads is the number of threads currently working on a request from the server client for this CPU. The system keeps this number as low as possible to minimize unnecessary context switching. This is an instantaneous count for the CPU, not an average over time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.2 |
swqAvailableThreadsAvailable Threads is the number of server threads on this CPU not currently working on requests from a client. The server dynamically adjusts the number of threads to maximize server performance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.3 |
swqAvailableWorkItemsEvery request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing. This is the instantaneous number of available work items for this CPU. A sustained near-zero value indicates the need to increase the MinFreeWorkItems registry value for the Server service. This value will always be 0 in the Blocking Queue instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.4 |
swqBorrowedWorkItemsEvery request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing. When a CPU runs out of work items, it borrows a free work item from another CPU. An increasing value of this running counter might indicate the need to increase the 'MaxWorkItems' or 'MinFreeWorkItems' registry values for the Server service. This value will always be 0 in the Blocking Queue instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.5 |
swqBytesReceivedPerSecThe rate at which the Server is receiving bytes from the network clients on this CPU. This value is a measure of how busy the Server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.6 |
swqBytesSentPerSecThe rate at which the Server is sending bytes to the network clients on this CPU. This value is a measure of how busy the Server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.7 |
swqBytesTransferredPerSecThe rate at which the Server is sending and receiving bytes with the network clients on this CPU. This value is a measure of how busy the Server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.8 |
swqContextBlocksQueuedPerSecContext Blocks Queued per second is the rate at which work context blocks had to be placed on the server's FSP queue to await server action.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.9 |
swqCurrentClientsCurrent Clients is the instantaneous count of the clients being serviced by this CPU. The server actively balances the client load across all of the CPU's in the system. This value will always be 0 in the Blocking Queue instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.10 |
swqQueueLengthQueue Length is the current length of the server work queue for this CPU. A sustained queue length greater than four might indicate processor congestion. This is an instantaneous count, not an average over time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.11 |
swqReadBytesPerSecRead Bytes/sec is the rate the server is reading data from files for the clients on this CPU. This value is a measure of how busy the Server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.12 |
swqReadOperationsPerSecRead Operations/sec is the rate the server is performing file read operations for the clients on this CPU. This value is a measure of how busy the Server is. This value will always be 0 in the Blocking Queue instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.13 |
swqTotalBytesPerSecTotal Bytes/sec is the rate the Server is reading and writing data to and from the files for the clients on this CPU. This value is a measure of how busy the Server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.14 |
swqTotalOperationsPerSecTotal Operations/sec is the rate the Server is performing file read and file write operations for the clients on this CPU. This value is a measure of how busy the Server is. This value will always be 0 in the Blocking Queue instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.15 |
swqWorkItemShortagesEvery request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing. A sustained value greater than zero indicates the need to increase the 'MaxWorkItems' registry value for the Server service. This value will always be 0 in the Blocking Queue instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.16 |
swqWriteBytesPerSecWrite Bytes/sec is the rate the server is writing data to files for the clients on this CPU. This value is a measure of how busy the Server is.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.17 |
swqWriteOperationsPerSecWrite Operations/sec is the rate the server is performing file write operations for the clients on this CPU. This value is a measure of how busy the Server is. This value will always be 0 in the Blocking Queue instance.ro Gauge32 .1.3.6.1.4.1.9600.1.2.74.1.18 |
smtpNTFSStoreDriverTableThe SMTP NTFS Store Driver performance object counters describe activity of the Exchange NTFS store driver, which is responsible for message transport to and from the message store. SEQUENCE OF SMTPNTFSStoreDriverEntry .1.3.6.1.4.1.9600.1.2.75 |
smtpNTFSStoreDriverEntryPerformance information for one particular instance of 'SMTP NTFS Store Driver' object. SMTPNTFSStoreDriverEntry .1.3.6.1.4.1.9600.1.2.75.1 |
snsdInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.75.1.1 |
snsdMessagesAllocatedThe total number of messages allocated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.75.1.2 |
snsdMessagesDeletedThe total number of messages deleted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.75.1.3 |
snsdMessagesEnumeratedThe total number of messages enumerated during startup.ro Gauge32 .1.3.6.1.4.1.9600.1.2.75.1.4 |
snsdMessagesInTheQueueDirectoryThe current number of messages in the queue directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.75.1.5 |
snsdOpenMessageBodiesThe current number of open message bodies.ro Gauge32 .1.3.6.1.4.1.9600.1.2.75.1.6 |
snsdOpenMessageStreamsThe current number of open message streams.ro Gauge32 .1.3.6.1.4.1.9600.1.2.75.1.7 |
smtpServerTableThe SMTP Server performance object monitors message activity generated by the Simple Mail Transport Protocol (SMTP) service, that can be installed as part of Windows 2000 Server. SEQUENCE OF SMTPServerEntry .1.3.6.1.4.1.9600.1.2.76 |
smtpServerEntryPerformance information for one particular instance of 'SMTP Server' object. SMTPServerEntry .1.3.6.1.4.1.9600.1.2.76.1 |
smtpSrvrInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.76.1.1 |
smtpSrvrPercentRcpntsLocalThe percentage of recipients that will be delivered locally.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.2 |
smtpSrvrPercentRcpntsRemoteThepercentage of recipients that will be delivered remotely.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.3 |
smtpSrvrAvgRcpntsPerMsgRcvdThe average number of recipients per inbound message received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.4 |
smtpSrvrAvgRcpntsPerMsgSentThe average number of recipients per outbound messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.5 |
smtpSrvrAvgRetriesPerMsgDlvrdThe average number of retries per local delivery.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.6 |
smtpSrvrAvgRetriesPerMsgSentThe average number of retries per outbound message sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.7 |
smtpSrvrBadMailMsgsBadPickupFileThe number of malformed pickup messages sent to badmail.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.8 |
smtpSrvrBadMailMsgsGeneralFailThe number of messages sent to badmail for reasons not associated with a specific counter.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.9 |
smtpSrvrBadMailMsgsHopCntExceedThe number of messages sent to badmil becuase they had exceeded the maximum hop count.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.10 |
smtpSrvrBadMailMsgsNDROfDSNThe number of Delivery Status Notifications sent to badmail becuase they could not be delivered.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.11 |
smtpSrvrBadMailMsgsNoRcpntsThe number of messages sent to badmail because they had no recipients.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.12 |
smtpSrvrBadMailMsgsTrigViaEventThe number of messages sent to badmail at the request of a server event sink.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.13 |
smtpSrvrBytesRcvdTotalThe total number of bytes received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.14 |
smtpSrvrBytesRcvdPerSecThe rate that bytes are received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.15 |
smtpSrvrBytesSentTotalThe total number of bytes sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.16 |
smtpSrvrBytesSentPerSecThe rate that bytes are sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.17 |
smtpSrvrBytesTotalThe total number of bytes sent and received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.18 |
smtpSrvrBytesTotalPerSecThe rate that bytes are sent and received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.19 |
smtpSrvrCatAddrLookupCmpltThe number of address lookup completions processedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.20 |
smtpSrvrCatAddrLookupCmpltPerSecThe number of address lookup completions processed per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.21 |
smtpSrvrCatAddrLookupsThe number of DS lookups for individual addressesro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.22 |
smtpSrvrCatAddrLookupsNotFoundThe number of address lookups that did not find any DS objectro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.23 |
smtpSrvrCatAddrLookupsPerSecThe number of address lookups dispatched to the DS per secondro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.24 |
smtpSrvrCatCatsCmpltdThe total number of messages submitted to categorizer that have finished categorization.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.25 |
smtpSrvrCatCatsCmpltdSuccessThe number of categorizations that completed without any errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.26 |
smtpSrvrCatCatsCmpltdPerSecThe rate of categorizations completed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.27 |
smtpSrvrCatCatsFailDSConnFailThe number of categorizations that failed due to a DS connection failurero Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.28 |
smtpSrvrCatCatsFailDSLogonFailThe number of categorizations that failed due to a DS logon failurero Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.29 |
smtpSrvrCatCatsFailOutOfMemoryThe number of categorizations that failed due to lack of available memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.30 |
smtpSrvrCatCatsFailNonRetryErrorThe number of categorizations that failed with a hard error (not retryable).ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.31 |
smtpSrvrCatCatsFailRetryErrorThe number of categorizations that failed with a retryable error.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.32 |
smtpSrvrCatCatsFailSinkRetryErrThe number of categorizations that failed with a generic retryable errorro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.33 |
smtpSrvrCatCatsInProgressThe number of categorizations in progress.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.34 |
smtpSrvrCatLDAPBindFailThe total number of LDAP bind failuresro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.35 |
smtpSrvrCatLDAPBindsThe total number of successfull LDAP binds performedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.36 |
smtpSrvrCatLDAPConnFailThe total number of failures encountered connection to LDAP serversro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.37 |
smtpSrvrCatLDAPConnsThe total number of LDAP connections openedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.38 |
smtpSrvrCatLDAPConnsCurrOpenThe number of LDAP connections currently openro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.39 |
smtpSrvrCatLDAPGeneralCmpltFailNumber of LDAP completions with a generic failurero Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.40 |
smtpSrvrCatLDAPPageSrchCmpltFailNumber of LDAP paged searches that completed with a failurero Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.41 |
smtpSrvrCatLDAPPagedSrchFailNumber of failures to dispatch an async paged LDAP searchro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.42 |
smtpSrvrCatLDAPPagedSrchsLDAP paged searches successfully dispatchedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.43 |
smtpSrvrCatLDAPPagedSrchsCmpltdNumber of paged LDAP completions processedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.44 |
smtpSrvrCatLDAPSrchCmpltFailNumber of LDAP searches that completed with a failurero Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.45 |
smtpSrvrCatLDAPSrchFailNumber of failures to dispatch an async LDAP searchro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.46 |
smtpSrvrCatLDAPSrchsLDAP searches successfully dispatchedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.47 |
smtpSrvrCatLDAPSrchsAbandonedNumber of LDAP searches abandonedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.48 |
smtpSrvrCatLDAPSrchsCmpltdNumber of LDAP search completions processedro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.49 |
smtpSrvrCatLDAPSrchsCmpltdPerSecLDAP search completions processed/secro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.50 |
smtpSrvrCatLDAPSrchsPendingCmpltNumber of LDAP searches pending async completonro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.51 |
smtpSrvrCatLDAPSrchsPerSecLDAP searches successfully dispatched/secro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.52 |
smtpSrvrCatMsgsCategorizedThe number of messages categorizer has submitted to queueing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.53 |
smtpSrvrCatMsgsAbortedThe number of messages marked to be aborted by the categorizer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.54 |
smtpSrvrCatMsgsBifurcatedThe number of new messages created by the categorizer (bifurcation).ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.55 |
smtpSrvrCatMsgsSubmittedThe total number of messages submitted to the categorizer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.56 |
smtpSrvrCatMsgsSubmittedPerSecThe rate that messages are being submitted to the categorizer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.57 |
smtpSrvrCatRcptsNDRdAmbigsAddrThe number of recipients with addresses that match multiple DS objects.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.58 |
smtpSrvrCatRcptsNDRdForwardLoopThe number of recipients NDRd by the categorizer due to a forwarding loop detection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.59 |
smtpSrvrCatRcptsNDRdIllegalAddrThe number of recipients with illegal addresses detected by the categorizer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.60 |
smtpSrvrCatRcptsNDRdSinkRecipErrThe number of recipients NDRd by the categorizer due to a generic recipient failure.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.61 |
smtpSrvrCatRcptsNDRdUnresolvedThe number of unresolved recipients (local addresses not found).ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.62 |
smtpSrvrCatRcptsNDRdByCategorizeThe number of recipients set to be NDRd by the categorizer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.63 |
smtpSrvrCatRcptsAfterCatThe number of mailmsg recipients submitted from categorizer to queueing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.64 |
smtpSrvrCatRcptsBeforeCatThe number of mailmsg recipients submitted to categorizer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.65 |
smtpSrvrCatRcptsInCatThe number of recipients the categorizer is currently processing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.66 |
smtpSrvrCatSendersUnresolvedThe number of seners not find in the DS.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.67 |
smtpSrvrCatSendersAmbigsAddrThe number of senders with addresses that match multiple DS objects.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.68 |
smtpSrvrCatMailmsgDupCollisionsThe number of times a duplicate recipient address was detected by mailmsg/categorizer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.69 |
smtpSrvrCategorizerQueueLengthThe number of messages in the categorizer queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.70 |
smtpSrvrConnErrorsPerSecThe number of connection errors per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.71 |
smtpSrvrCurrentMsgsInLocalDlvryThe number of messages that are currently being processed by a server event sink for local delivery.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.72 |
smtpSrvrDNSQueriesTotalThe total number of DNS lookups.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.73 |
smtpSrvrDNSQueriesPerSecThe rate of DNS lookups.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.74 |
smtpSrvrDirDropsTotalThe total number of messages placed in a drop directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.75 |
smtpSrvrDirDropsPerSecThe number of messages placed in a drop directory per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.76 |
smtpSrvrETRNMsgsTotalThe total number of ETRN messages received by the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.77 |
smtpSrvrETRNMsgsPerSecThe number of ETRN messages per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.78 |
smtpSrvrInboundConnsCurrentThe total number of connections currently inbound.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.79 |
smtpSrvrInboundConnsTotalThe total number of inbound connections received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.80 |
smtpSrvrLocalQueueLengthThe number of messages in the local queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.81 |
smtpSrvrLocalRetryQueueLengthThe number of messages in the local retry queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.82 |
smtpSrvrMsgBytesRcvdTotalThe total number of bytes received in messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.83 |
smtpSrvrMsgBytesRcvdPerSecThe rate that bytes are received in messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.84 |
smtpSrvrMsgBytesSentTotalThe total number of bytes sent in messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.85 |
smtpSrvrMsgBytesSentPerSecThe rate that bytes are sent in messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.86 |
smtpSrvrMsgBytesTotalThe total number of bytes sent and received in messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.87 |
smtpSrvrMsgBytesTotalPerSecThe rate that bytes are sent and received in messages.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.88 |
smtpSrvrMsgDlvryRetriesThe total number of local deliveries that were retried.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.89 |
smtpSrvrMsgSendRetriesThe total number of outbound message sends that were retried.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.90 |
smtpSrvrMsgsCurrUndeliverableThe number of messages that have been reported as currently undeliverable by routing.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.91 |
smtpSrvrMsgsDlvrdTotalThe total number of messages delivered to local mailboxes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.92 |
smtpSrvrMsgsDlvrdPerSecThe rate that messages are delivered to local mailboxes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.93 |
smtpSrvrMsgsPendingRouteThe number of messages that have been categorized but not routed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.94 |
smtpSrvrMsgsRcvdTotalThe total number of inbound messages accepted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.95 |
smtpSrvrMsgsRcvdPerSecThe rate that inbound messages are being received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.96 |
smtpSrvrMsgsRfsdForAddrObjectsThe total number of messages refused due to no address objects.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.97 |
smtpSrvrMsgsRfsdForMailObjectsThe total number of messages refused due to no mail objects.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.98 |
smtpSrvrMsgsRfsdForSizeThe total number of messages rejected because they were too big.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.99 |
smtpSrvrMsgsSentTotalThe total number of outbound messages sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.100 |
smtpSrvrMsgsSentPerSecThe rate that outbound messages are being sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.101 |
smtpSrvrNDRsGeneratedThe number of non-delivery reports that have been generated.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.102 |
smtpSrvrNumberOfMailFilesOpenNumber of handles to open mail files.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.103 |
smtpSrvrNumberOfQueueFilesOpenNumber of handles to open queue files.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.104 |
smtpSrvrOutboundConnsCurrentThe number of connections currently outbound.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.105 |
smtpSrvrOutboundConnsRfsdThe number of outbound connection attempts refused by remote sites.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.106 |
smtpSrvrOutboundConnsTotalThe total number of outbound connections attempted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.107 |
smtpSrvrPickupDirMsgsRtrvdTotalThe total number of messages retrieved from the mail pick-up directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.108 |
smtpSrvrPickupDirMsgsRtrvdPerSecThe rate that messages are being retrieved from the mail pick-up directory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.109 |
smtpSrvrRemoteQueueLengthThe number of messages in the remote queue.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.110 |
smtpSrvrRemoteRetryQueueLengthThe number of messages in the retry queue for remote delivery.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.111 |
smtpSrvrRouteTableLookupsTotalThe total number of routing table lookups.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.112 |
smtpSrvrRouteTableLookupsPerSecThe number of routing table lookups per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.113 |
smtpSrvrTotalConnErrorsThe total number of connection errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.114 |
smtpSrvrTotalDSNFailThe total number of failed DSN generation attempts.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.115 |
smtpSrvrTotalMsgsSubmittedThe total messages submitted to queuing for delivery.ro Gauge32 .1.3.6.1.4.1.9600.1.2.76.1.116 |
systemThe System performance object consists of counters that apply to more than one component of the computer. Percentage counters by default do not show values above 100 percent. See 'Overview of Performance Monitoring' in the Windows 2000 Server Resource Kit Server Operations Guide for instructions about changing this default in the registry. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.77 |
systemPercentRegistryQuotaInUse% Registry Quota In Use is the percentage of the Total Registry Quota Allowed that is currently being used by the system. This counter displays the current percentage value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.1 |
systemAlignmentFixupsPerSecAlignment Fixups/sec is the rate of alignment faults fixed by the system. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.2 |
systemContextSwitchesPerSecContext Switches/sec is the combined rate at which all processors on the computer are switched from one thread to another. Context switches occur when a running thread voluntarily relinquishes the processor, is preempted by a higher priority ready thread, or switches between user-mode and privileged (kernel) mode to use an Executive or subsystem service. It is the sum of Thread: Context Switches/sec for all threads running on all processors in the computer and is measured in numbers of switches. There are context switch counters on the System and Thread objects. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.3 |
systemExceptionDispatchesPerSecException Dispatches/sec is the rate of exceptions dispatched by the system. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.4 |
systemFileControlBytesPerSecFile Control Bytes/sec is the overall rate at which bytes are transferred for all file system operations that are neither reads nor writes, including file system control requests and requests for information about device characteristics or status. It is measured in numbers of bytes. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.5 |
systemFileControlOperationPerSecFile Control Operations/sec is the combined rate of file system operations that are neither reads nor writes, such as file system control requests and requests for information about device characteristics or status. This is the inverse of System: File Data Operations/sec and is measured in number of operations perf second. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.6 |
systemFileDataOperationsPerSecFile Data Operations/ sec is the combined rate of read and write operations on all logical disks on the computer. This is the inverse of System: File Control Operations/sec. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.7 |
systemFileReadBytesPerSecFile Read Bytes/sec is the overall rate at which bytes are read to satisfy file system read requests to all devices on the computer, including reads from the file system cache. It is measured in number of bytes per second. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.8 |
systemFileReadOperationsPerSecFile Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.9 |
systemFileWriteBytesPerSecFile Write Bytes/sec is the overall rate at which bytes are written to satisfy file system write requests to all devices on the computer, including writes to the file system cache. It is measured in number of bytes per second. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.10 |
systemFileWriteOperationsPerSecFile Write Operations/sec is the combined rate of the file system write requests to all devices on the computer, including requests to write to data in the file system cache. It is measured in numbers of writes. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.11 |
systemFloatingEmulationsPerSecFloating Emulations/sec is the rate of floating emulations performed by the system. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.12 |
systemProcessesProcesses is the number of processes in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. Each process represents the running of a program.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.13 |
systemProcessorQueueLengthProcessor Queue Length is the number of threads in the processor queue. There is a single queue for processor time even on computers with multiple processors. Unlike the disk counters, this counter counts ready threads only, not threads that are running. A sustained processor queue of greater than two threads generally indicates processor congestion. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.14 |
systemSystemCallsPerSecSystems Calls/sec is the combined rate of calls to Windows NT system service routines by all processes running on the computer. These routines perform all of the basic scheduling and synchronization of activities on the computer, and provide access to non-graphic devices, memory management, and name space management. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.15 |
systemSystemUpTimeSystem Up Time is the elapsed time (in seconds) that the computer has been running since it was last started. This counter displays the difference between the start time and the current time.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.16 |
systemThreadsThreads is the number of threads in the computer at the time of data collection. Notice that this is an instantaneous count, not an average over the time interval. A thread is the basic executable entity that can execute instructions in a processor.ro Gauge32 .1.3.6.1.4.1.9600.1.2.77.17 |
tcpV4The TCP performance object consists of counters that measure the rates at which TCP segments are sent and received using the Transmission Control Protocol (TCP). It includes counters that monitor the number of TCP connections in each TCP connection state. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.78 |
tcpV4ConnectionFailuresConnection Failures is the number of times TCP connections have made a direct transition to the CLOSED state from the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.1 |
tcpV4ConnectionsActiveConnections Active is the number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.2 |
tcpV4ConnectionsEstablishedConnections Established is the number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.3 |
tcpV4ConnectionsPassiveConnections Passive is the number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.4 |
tcpV4ConnectionsResetConnections Reset is the number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.5 |
tcpV4SegmentsReceivedPerSecSegments Received/sec is the rate at which segments are received, including those received in error. This count includes segments received on currently established connections.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.6 |
tcpV4SegmentsRetransmittedPerSecSegments Retransmitted/sec is the rate at which segments are retransmitted, that is, segments transmitted containing one or more previously transmitted bytes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.7 |
tcpV4SegmentsSentPerSecSegments Sent/sec is the rate at which segments are sent, including those on current connections, but excluding those containing only retransmitted bytes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.8 |
tcpV4SegmentsPerSecSegments/sec is the rate at which TCP segments are sent or received using the TCP protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.78.9 |
tcpV6 OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.79 |
tcpV6ConnectionFailuresConnection Failures is the number of times TCP connections have made a direct transition to the CLOSED state from the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.1 |
tcpV6ConnectionsActiveConnections Active is the number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.2 |
tcpV6ConnectionsEstablishedConnections Established is the number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.3 |
tcpV6ConnectionsPassiveConnections Passive is the number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.4 |
tcpV6ConnectionsResetConnections Reset is the number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.5 |
tcpV6SegmentsReceivedPerSecSegments Received/sec is the rate at which segments are received, including those received in error. This count includes segments received on currently established connections.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.6 |
tcpV6SegmentsRetransmittedPerSecSegments Retransmitted/sec is the rate at which segments are retransmitted, that is, segments transmitted containing one or more previously transmitted bytes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.7 |
tcpV6SegmentsSentPerSecSegments Sent/sec is the rate at which segments are sent, including those on current connections, but excluding those containing only retransmitted bytes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.8 |
tcpV6SegmentsPerSecSegments/sec is the rate at which TCP segments are sent or received using the TCP protocol.ro Gauge32 .1.3.6.1.4.1.9600.1.2.79.9 |
telephonyThe Telephony performance object provides counters for monitoring telephone-communication activity on a computer running Windows 2000. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.80 |
telephonyActiveLinesThe number of telephone lines serviced by this computer that are currently active.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.1 |
telephonyActiveTelephonesThe number of telephone devices that are currently being monitored.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.2 |
telephonyClientAppsThe number of applications that are currently using telephony services.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.3 |
telephonyCurrentIncomingCallsCurrent incoming calls being serviced by this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.4 |
telephonyCurrentOutgoingCallsCurrent outgoing calls being serviced by this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.5 |
telephonyIncomingCallsPerSecThe rate of incoming calls answered by this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.6 |
telephonyLinesThe number of telephone lines serviced by this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.7 |
telephonyOutgoingCallsPerSecThe rate of outgoing calls made by this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.8 |
telephonyTelephoneDevicesThe number of telephone devices serviced by this computer.ro Gauge32 .1.3.6.1.4.1.9600.1.2.80.9 |
terminalServices OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.81 |
tsActiveSessionsNumber of active Terminal Services sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.81.1 |
tsInactiveSessionsNumber of inactive Terminal Services sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.81.2 |
tsTotalSessionsTotal number of Terminal Services sessions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.81.3 |
terminalServicesSessionTableThe Terminal Services Session object provides per-session resource statistics such as packet and frame transmission data, errors, and cache activity for Terminal Services. SEQUENCE OF TerminalServicesSessionEntry .1.3.6.1.4.1.9600.1.2.82 |
terminalServicesSessionEntryPerformance information for one particular instance of 'Terminal Services Session' object. TerminalServicesSessionEntry .1.3.6.1.4.1.9600.1.2.82.1 |
tssInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.82.1.1 |
tssPercentPrivilegedTime% Privileged Time is the percentage of elapsed time that the threads of the process have spent executing code in privileged mode. When a Windows NT system service is called, the service will often run in Privileged Mode to gain access to system-private data. Such data is protected from access by threads executing in user Mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.2 |
tssPercentProcessorTime% Processor Time is the percentage of elapsed time that all of the threads of this process used the processor to execute instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count. On Multi-processor machines the maximum value of the counter is 100 % times the number of processors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.3 |
tssPercentUserTime% User Time is the percentage of elapsed time that this process' threads have spent executing code in user mode. Applications, environment subsystems and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows NT Executive, Kernel, and device drivers. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.4 |
tssHandleCountThe total number of handles currently open by this process. This number is the sum of the handles currently open by each thread in this process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.5 |
tssInputAsyncFrameErrorNumber of input async framing errors. These can be caused by a noisy transmission line. Using a smaller packet size may help in some cases.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.6 |
tssInputAsyncOverflowNumber of input async overflow errors. These can be caused by a lack of buffer space available on the host.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.7 |
tssInputAsyncOverrunNumber of input async overrun errors. These can be caused by the baud rate being faster than the computer can handle, or a non-16550 serial line is used. Overruns can also occur if too many high speed serial lines are active at one time for the processor's power.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.8 |
tssInputAsyncParityErrorNumber of input async parity errors. These can be caused by a noisy transmission linero Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.9 |
tssInputBytesNumber of bytes input on this session that includes all protocol overhead.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.10 |
tssInputCompressFlushesNumber of input compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transferring compressed files over Client Drive Mapping.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.11 |
tssInputCompressedBytesNumber of bytes input after compression. This number compared with the Total Bytes input is the compression ratio.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.12 |
tssInputCompressionRatioCompression ratio of the server input data stream.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.13 |
tssInputErrorsNumber of input errors of all types. Some example input errors are lost ACK's, badly formed packets, etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.14 |
tssInputFramesNumber of frames (packets) input on this Session.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.15 |
tssInputTimeoutsThe total number of timeouts on the communication line as seen from the client side of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.16 |
tssInputTransportErrorsNumber of Terminal Services transport-level errors on input.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.17 |
tssInputWaitForOutBufThe number of times that a wait for an available send buffer was done by the protocols on the client side of the connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.18 |
tssInputWdBytesNumber of bytes input on this session after all protocol overhead has been removed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.19 |
tssInputWdFramesThe number of frames input after any additional protocol added frames have been removed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.20 |
tssOutputAsyncFrameErrorNumber of output async framing errors. This could be caused by a hardware or line problem.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.21 |
tssOutputAsyncOverflowNumber of output async overflow errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.22 |
tssOutputAsyncOverrunNumber of output async overrun errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.23 |
tssOutputAsyncParityErrorNumber of output async parity errors. These can be caused by a hardware or line problem.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.24 |
tssOutputBytesNumber of bytes output on this Session that includes all protocol overhead.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.25 |
tssOutputCompressFlushesNumber of output compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transfering compressed files over Client Drive Mapping.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.26 |
tssOutputCompressedBytesNumber of bytes output after compression. This number compared with the Total Bytes output is the compression ratio.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.27 |
tssOutputCompressionRatioCompression ratio of the server output data stream.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.28 |
tssOutputErrorsNumber of output errors of all types. Some example output errors are lost ACK's, badly formed packets, etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.29 |
tssOutputFramesNumber of frames (packets) output on this session.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.30 |
tssOutputTimeoutsThe total number of timeouts on the communication line from the host side of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.31 |
tssOutputTransportErrorsNumber of Terminal Services transport-level errors on output.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.32 |
tssOutputWaitForOutBufThis is the number of times that a wait for an available send buffer was done by the protocol on the server side of the connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.33 |
tssOutputWdBytesNumber of bytes output on this session after all protocol overhead has been removed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.34 |
tssOutputWdFramesThe number of frames output before any additional protocol frames have been added.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.35 |
tssPageFaultsPerSecPage Faults/sec is the rate Page Faults occur in the threads executing in this process. A page fault occurs when a thread refers to a virtual memory page that is not in its working set in main memory. This will not cause the page to be fetched from disk if it is on the standby list and hence already in main memory, or if it is in use by another process with whom the page is shared.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.36 |
tssPageFileBytesPage File Bytes is the current number of bytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.37 |
tssPageFileBytesPeakPage File Bytes Peak is the maximum number of bytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.38 |
tssPoolNonpagedBytesPool Nonpaged Bytes is the number of bytes in the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory: Pool Nonpaged Bytes is calculated differently than Process: Pool Nonpaged Bytes, so it might not equal Process: Pool Nonpaged Bytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.39 |
tssPoolPagedBytesPool Paged Bytes is the number of bytes in the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory: Pool Paged Bytes is calculated differently than Process: Pool Paged Bytes, so it might not equal Process: Pool Paged Bytes: _Total. This counter displays the last observed value only; it is not an average.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.40 |
tssPrivateBytesPrivate Bytes is the current number of bytes this process has allocated that cannot be shared with other processes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.41 |
tssProtocolBitmapCacheHitRatioHit ratio in the protocol bitmap cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.42 |
tssProtocolBitmapCacheHitsNumber of hits in the protocol bitmap cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.43 |
tssProtocolBitmapCacheReadsNumber of references to the protocol bitmap cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.44 |
tssProtocolBrushCacheHitRatioHit ratio in the protocol brush cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.45 |
tssProtocolBrushCacheHitsNumber of hits in the protocol brush cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.46 |
tssProtocolBrushCacheReadsNumber of references to the protocol brush cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.47 |
tssProtocolGlyphCacheHitRatioHit ratio in the protocol glyph cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.48 |
tssProtocolGlyphCacheHitsNumber of hits in the protocol glyph cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.49 |
tssProtocolGlyphCacheReadsNumber of references to the protocol glyph cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.50 |
tssProtocolSvScrnBtmpCachHtRatioHit ratio in the protocol save screen bitmap cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.51 |
tssProtocolSvScrnBtmpCachHtsNumber of hits in the protocol save screen bitmap cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.52 |
tssProtocolSvScrnBtmpCachReadsNumber of references to the protocol save screen bitmap cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.53 |
tssThreadCountThe number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.54 |
tssTotalAsyncFrameErrorTotal number of async framing errors. These can be caused by a noisy transmission line. Using a smaller packet size may help in some cases.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.55 |
tssTotalAsyncOverflowTotal number of async overflow errors. These can be caused by a lack of buffer space available on the host.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.56 |
tssTotalAsyncOverrunTotal number of async overrun errors. These can be caused by the baud rate being faster than the computer can handle, or a non-16550 serial line is used. Overruns can also occur if too many high speed serial lines are active at one time for the processor's power.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.57 |
tssTotalAsyncParityErrorTotal number of async parity errors. These can be caused by a noisy transmission line.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.58 |
tssTotalBytesTotal number of bytes on this Session that includes all protocol overhead.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.59 |
tssTotalCompressFlushesTotal number of compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transfering compressed files over Client Drive Mapping.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.60 |
tssTotalCompressedBytesTotal number of bytes after compression. This number compared with the total bytes is the compression ratio.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.61 |
tssTotalCompressionRatioTotal compression ratio of the server data stream.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.62 |
tssTotalErrorsTotal number of errors of all types. Some example errors are lost ACK's, badly formed packets, etc.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.63 |
tssTotalFramesTotal number of frames (packets) on this Session.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.64 |
tssTotalProtocolCacheHitRatioOverall hit ratio for all protocol caches.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.65 |
tssTotalProtocolCacheHitsTotal hits in all protocol caches. The protocol caches Windows objects that are likely to be re-used to avoid having to re-send them on the transmission line. Example objects are Windows icons and brushes. Hits in the cache represent objects that did not need to be re-sent.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.66 |
tssTotalProtocolCacheReadsTotal references to all protocol caches.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.67 |
tssTotalTimeoutsThe total number of timeouts on the communication line from both the host and client sides of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.68 |
tssTotalTransportErrorsTotal number of Terminal Services transport-level errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.69 |
tssTotalWaitForOutBufThe number of times that a wait for an available send buffer was done by the protocols on both the server and client sides of the connection.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.70 |
tssTotalWdBytesTotal number of bytes on this Session after all protocol overhead has been removed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.71 |
tssTotalWdFramesThe total number of frames input and output before any additional protocol frames have been added.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.72 |
tssVirtualBytesVirtual Bytes is the current size in bytes of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and by using too much, the process can limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.73 |
tssVirtualBytesPeakVirtual Bytes Peak is the maximum number of bytes of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is however finite, and by using too much, the process might limit its ability to load libraries.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.74 |
tssWorkingSetWorking Set is the current number of bytes in the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.75 |
tssWorkingSetPeakWorking Set Peak is the maximum number of bytes in the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory.ro Gauge32 .1.3.6.1.4.1.9600.1.2.82.1.76 |
threadTableThe Thread performance object consists of counters that measure aspects of thread behavior. A thread is the basic object that executes instructions on a processor. All running processes have at least one thread. SEQUENCE OF ThreadEntry .1.3.6.1.4.1.9600.1.2.83 |
threadEntryPerformance information for one particular instance of 'Thread' object. ThreadEntry .1.3.6.1.4.1.9600.1.2.83.1 |
threadInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.83.1.1 |
threadPercentPrivilegedTimePrivileged Time is the percentage of elapsed time that this thread has spent executing code in privileged mode. When a Windows NT system service is called, the service will often run in privileged mode in order to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit such as page faults and interrupts. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.2 |
threadPercentProcessorTime% Processor Time is the percentage of elapsed time that this thread used the processor to execute instructions. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Code executed to handle some hardware interrupts and trap conditions are included in this count.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.3 |
threadPercentUserTime% User Time is the percentage of elapsed time that this thread has spent executing code in user mode. Applications, environment subsystems, and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows NT Executive, Kernel, and device drivers. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.4 |
threadContextSwitchesPerSecContext Switches/sec is the rate of switches from one thread to another. Thread switches can occur either inside of a single process or across processes. A thread switch can be caused either by one thread asking another for information, or by a thread being preempted by another, higher priority thread becoming ready to run. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of an application appear in other subsystem processes in addition to the privileged time in the application. Switching to the subsystem process causes one Context Switch in the application thread. Switching back causes another Context Switch in the subsystem thread.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.5 |
threadElapsedTimeThe total elapsed time (in seconds) this thread has been running.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.6 |
threadIDProcessID Process is the unique identifier of this process. ID Process numbers are reused, so they only identify a process for the lifetime of that process.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.7 |
threadIDThreadID Thread is the unique identifier of this thread. ID Thread numbers are reused, so they only identify a thread for the lifetime of that thread.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.8 |
threadPriorityBaseThe current base priority of this thread. The system can raise the thread's dynamic priority above the base priority if the thread is handling user input, or lower it towards the base priority if the thread becomes compute bound.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.9 |
threadPriorityCurrentThe current dynamic priority of this thread. The system can raise the thread's dynamic priority above the base priority if the thread is handling user input, or lower it towards the base priority if the thread becomes compute bound.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.10 |
threadStartAddressStarting virtual address for this thread.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.11 |
threadThreadStateThread State is the current state of the thread. It is 0 for Initialized, 1 for Ready, 2 for Running, 3 for Standby, 4 for Terminated, 5 for Wait, 6 for Transition, 7 for Unknown. A Running thread is using a processor; a Standby thread is about to use one. A Ready thread wants to use a processor, but is waiting for a processor because none are free. A thread in Transition is waiting for a resource in order to execute, such as waiting for its execution stack to be paged in from disk. A Waiting thread has no use for the processor because it is waiting for a peripheral operation to complete or a resource to become free.ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.12 |
threadThreadWaitReasonThread Wait Reason is only applicable when the thread is in the Wait state (see Thread State). It is 0 or 7 when the thread is waiting for the Executive, 1 or 8 for a Free Page, 2 or 9 for a Page In, 3 or 10 for a Pool Allocation, 4 or 11 for an Execution Delay, 5 or 12 for a Suspended condition, 6 or 13 for a User Request, 14 for an Event Pair High, 15 for an Event Pair Low, 16 for an LPC Receive, 17 for an LPC Reply, 18 for Virtual Memory, 19 for a Page Out; 20 and higher are not assigned at the time of this writing. Event Pairs are used to communicate with protected subsystems (see Context Switches).ro Gauge32 .1.3.6.1.4.1.9600.1.2.83.1.13 |
udpV4The UDP performance object consists of counters that measure the rates at which User Data Protocol (UDP) datagrams are sent and received using the UDP. It includes counters that monitor UDP errors. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.84 |
udpV4DatagramsNoPortPerSecDatagrams No Port/sec is the rate of received UDP datagrams for which there was no application at the destination port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.84.1 |
udpV4DatagramsReceivedErrorsDatagrams Received Errors is the number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.84.2 |
udpV4DatagramsReceivedPerSecDatagrams Received/sec is the rate at which UDP datagrams are delivered to UDP users.ro Gauge32 .1.3.6.1.4.1.9600.1.2.84.3 |
udpV4DatagramsSentPerSecDatagrams Sent/sec is the rate at which UDP datagrams are sent from the entity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.84.4 |
udpV4DatagramsPerSecDatagrams/sec is the rate at which UDP datagrams are sent or received by the entity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.84.5 |
udpV6 OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.85 |
udpV6DatagramsNoPortPerSecDatagrams No Port/sec is the rate of received UDP datagrams for which there was no application at the destination port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.85.1 |
udpV6DatagramsReceivedErrorsDatagrams Received Errors is the number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.ro Gauge32 .1.3.6.1.4.1.9600.1.2.85.2 |
udpV6DatagramsReceivedPerSecDatagrams Received/sec is the rate at which UDP datagrams are delivered to UDP users.ro Gauge32 .1.3.6.1.4.1.9600.1.2.85.3 |
udpV6DatagramsSentPerSecDatagrams Sent/sec is the rate at which UDP datagrams are sent from the entity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.85.4 |
udpV6DatagramsPerSecDatagrams/sec is the rate at which UDP datagrams are sent or received by the entity.ro Gauge32 .1.3.6.1.4.1.9600.1.2.85.5 |
webServiceTableThe Web Service object counters installed with Internet Information Service monitor file transfer rates, bandwidth usage, and connection rates. You can view performance data for all instances of this object (using the _Total instance) or for specific instances, such as the Default Web Site or Administration Web Site instances. In addition to these counters, counters supplied by the Internet Information Services Global performance object combine data for the Web service with the performance data they report for IIS as a whole. For more information, see the Internet Information Services Global object. SEQUENCE OF WebServiceEntry .1.3.6.1.4.1.9600.1.2.86 |
webServiceEntryPerformance information for one particular instance of 'Web Service' object. WebServiceEntry .1.3.6.1.4.1.9600.1.2.86.1 |
wsInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.86.1.1 |
wsAnonymousUsersPerSecThe rate users are making anonymous connections to the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.2 |
wsBytesReceivedPerSecBytes Received/sec is the rate that data bytes are received by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.3 |
wsBytesSentPerSecBytes Sent/sec is the rate data bytes are being sent by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.4 |
wsBytesTotalPerSecBytes Total/sec is the sum of Bytes Sent/sec and Bytes Received/sec. This is the total rate of bytes transferred by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.5 |
wsCGIRqstsPerSecThe rate CGI requests are received by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.6 |
wsConnAtmpsPerSecThe rate that connections to the Web service are being attempted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.7 |
wsCopyRqstsPerSecThe rate HTTP requests using the COPY method are made. Copy requests are used for copying files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.8 |
wsCurrentAnonymousUsersCurrent Anonymous Users is the number of users who currently have an anonymous connection using the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.9 |
wsCurrentBlkdAsyncIORqstsCurrent requests temporarily blocked due to bandwidth throttling settings.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.10 |
wsCurrentCALCountForSSLConnsThis counter is no longer valid. Value will always be zero.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.11 |
wsCurrentCALCountForAuthdUsersThis counter is no longer valid. Value will always be zero.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.12 |
wsCurrentCGIRqstsCurrent CGI Requests is the current number of CGI requests being simultaneously processed by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.13 |
wsCurrentConnsCurrent Connections is the current number of connections established with the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.14 |
wsCurrentISAPIExtensionRqstsCurrent ISAPI Extension Requests is the current number of ISAPI requests being simultaneously processed by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.15 |
wsCurrentNonAnonymousUsersCurrent NonAnonymous Users is the number of users who currently have a non-anonymous connection using the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.16 |
wsCurrentBlkdBandwidthBytesCurrent bytes temporarily blocked due to bandwidth throttling settings.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.17 |
wsDeleteRqstsPerSecThe rate HTTP requests using the DELETE method are made. Delete requests are generally used for file removals.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.18 |
wsFilesReceivedPerSecThe rate files are received by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.19 |
wsFilesSentPerSecThe rate files are sent by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.20 |
wsFilesPerSecThe rate files are transferred, that is, sent and received by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.21 |
wsGetRqstsPerSecThe rate HTTP requests using the GET method are made. Get requests are the most common HTTP request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.22 |
wsHeadRqstsPerSecThe rate HTTP requests using the HEAD method are made. Head requests generally indicate a client is querying the state of a document they already have to see if it needs to be refreshed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.23 |
wsISAPIExtensionRqstsPerSecThe rate that ISAPI Extension requests are received by the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.24 |
wsLockRqstsPerSecThe rate HTTP requests using the LOCK method are made. Lock requests are used to lock a file for one user so that only that user can modify the file.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.25 |
wsLockedErrorsPerSecThe rate of errors due to requests that couldn't be satisfied by the server because the requested document was locked. These are generally reported as an HTTP 423 error code to the client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.26 |
wsLogonAtmpsPerSecThe rate that logons to the Web service are being attempted.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.27 |
wsMaximumAnonymousUsersMaximum Anonymous Users is the maximum number of users who established concurrent anonymous connections using the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.28 |
wsMaximumCALCountForSSLConnsThis counter is no longer valid. Value will always be zero.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.29 |
wsMaximumCALCountForAuthdUsersThis counter is no longer valid. Value will always be zero.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.30 |
wsMaximumCGIRqstsMaximum CGI Requests is the maximum number of CGI requests simultaneously processed by the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.31 |
wsMaximumConnsMaximum Connections is the maximum number of concurrent connections established with the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.32 |
wsMaximumISAPIExtensionRqstsMaximum ISAPI Extension Requests is the maximum number of ISAPI requests simultaneously processed by the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.33 |
wsMaximumNonAnonymousUsersMaximum NonAnonymous Users is the maximum number of concurrent non-anonymous connections to the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.34 |
wsMeasuredAsyncIOBandwidthUsageMeasured bandwidth of asynchronous I/O averaged over a minute.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.35 |
wsMkcolRqstsPerSecThe rate HTTP requests using the MKCOL method are made. Mkcol requests are used to create directories on the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.36 |
wsMoveRqstsPerSecThe rate HTTP requests using the MOVE method are made. Move requests are used for moving files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.37 |
wsNonAnonymousUsersPerSecThe rate users are making non-anonymous connections to the Web service.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.38 |
wsNotFoundErrorsPerSecThe rate of errors due to requests that couldn't be satisfied by the server because the requested document could not be found. These are generally reported as an HTTP 404 error code to the client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.39 |
wsOptionsRqstsPerSecThe rate HTTP requests using the OPTIONS method are made.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.40 |
wsOtherRqstMethodsPerSecThe rate HTTP requests are made that do not use the OPTIONS, GET, HEAD, POST, PUT, DELETE, TRACE, MOVE, COPY, MKCOL, PROPFIND, PROPPATCH, SEARCH, LOCK or UNLOCK methods.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.41 |
wsPostRqstsPerSecThe rate HTTP requests using the POST method are made.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.42 |
wsPropfindRqstsPerSecThe rate HTTP requests using the PROPFIND method are made. Propfind requests retrieve property values on files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.43 |
wsProppatchRqstsPerSecThe rate HTTP requests using the PROPPATCH method are made. Proppatch requests set property values on files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.44 |
wsPutRqstsPerSecThe rate HTTP requests using the PUT method are made.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.45 |
wsSearchRqstsPerSecThe rate HTTP requests using the SEARCH method are made. Search requests are used to query the server to find resources that match a set of conditions provided by the client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.46 |
wsServiceUptimeThe length of time the Web Service has been running.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.47 |
wsTotalAllowedAsyncIORqstsTotal requests allowed by bandwidth throttling settings (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.48 |
wsTotalAnonymousUsersTotal Anonymous Users is the total number of users who established an anonymous connection with the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.49 |
wsTotalBlkdAsyncIORqstsTotal requests temporarily blocked due to bandwidth throttling settings (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.50 |
wsTotalBytesReceivedTotal Bytes Received is the number of data bytes that have been received by the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.51 |
wsTotalBytesSentTotal Bytes Sent is the number of data bytes that have been sent by the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.52 |
wsTotalBytesTransferedTotal bytes either received or sent by the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.53 |
wsTotalCGIRqstsTotal CGI requests is the total number of CGI requests (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.54 |
wsTotalConnAtmpsAllInstancesTotal Connection Attempts is the number of connections that have been attempted using the Web service (since service startup). This counter is for all instances listed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.55 |
wsTotalCopyRqstsTotal Copy Requests is the number of HTTP requests using the COPY method (since service startup). Copy requests are used for copying files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.56 |
wsTotalDeleteRqstsTotal Delete Requests is the number of HTTP requests using the DELETE method (since service startup). Delete requests are generally used for file removals.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.57 |
wsTotalFilesReceivedTotal Files Received is the total number of files received by the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.58 |
wsTotalFilesSentTotal Files Sent is the total number of files sent by the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.59 |
wsTotalFilesTransferredTotal Files Transferred is the sum of Files Sent and Files Received (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.60 |
wsTotalGetRqstsTotal Get Requests is the number of HTTP requests using the GET method (since service startup). Get requests are the most common HTTP request.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.61 |
wsTotalHeadRqstsTotal Head Requests is the number of HTTP requests using the HEAD method (since service startup). Head requests generally indicate a client is querying the state of a document they already have to see if it needs to be refreshed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.62 |
wsTotalISAPIExtensionRqstsTotal ISAPI Extension Requests received (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.63 |
wsTotalLockRqstsTotal Lock Requests is the number of HTTP requests using the LOCK method (since service startup). Lock requests are used to lock a file for one user so that only that user can modify the file.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.64 |
wsTotalLockedErrorsTotal Locked Errors is the number of requests that couldn't be satisfied by the server because the requested was locked (since service startup). These are generally reported as an HTTP 423 error code to the client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.65 |
wsTotalLogonAtmpsTotal Logon Attempts is the number of logons attempts to the Web Service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.66 |
wsTotalMethodRqstsTotal Method Requests is the number of all HTTP requests (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.67 |
wsTotalMethodRqstsPerSecThe rate HTTP requests are received.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.68 |
wsTotalMkcolRqstsTotal Mkcol Requests is the number of HTTP requests using the MKCOL method (since service startup). Mkcol requests are used to create directories on the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.69 |
wsTotalMoveRqstsTotal Move Requests is the number of HTTP requests using the MOVE method (since service startup). Move requests are used for moving files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.70 |
wsTotalNonAnonymousUsersTotal NonAnonymous Users is the total number of users who established a non-anonymous connection with the Web service (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.71 |
wsTotalNotFoundErrorsTotal Not Found Errors is the number of requests that couldn't be satisfied by the server because the requested document could not be found (since service startup). These are generally reported as an HTTP 404 error code to the client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.72 |
wsTotalOptionsRqstsTotal Options Requests is the number of HTTP requests using the OPTIONS method (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.73 |
wsTotalOtherRqstMethodsTotal Other Request Methods is the number of HTTP requests that are not OPTIONS, GET, HEAD, POST, PUT, DELETE, TRACE, MOVE, COPY, MKCOL, PROPFIND, PROPPATCH, SEARCH, LOCK or UNLOCK methods (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.74 |
wsTotalPostRqstsTotal Post Requests is the number of HTTP requests using the POST method (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.75 |
wsTotalPropfindRqstsTotal Propfind Requests is the number of HTTP requests using the PROPFIND method (since service startup). Propfind requests retrieve property values on files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.76 |
wsTotalProppatchRqstsTotal Proppatch Requests is the number of HTTP requests using the PROPPATCH method (since service startup). Proppatch requests set property values on files and directories.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.77 |
wsTotalPutRqstsTotal Put Requests is the number of HTTP requests using the PUT method (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.78 |
wsTotalRejectedAsyncIORqstsTotal requests rejected due to bandwidth throttling settings (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.79 |
wsTotalSearchRqstsTotal Search Requests is the number of HTTP requests using the SEARCH method (since service startup). Search requests are used to query the server to find resources that match a set of conditions provided by the client.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.80 |
wsTotalTraceRqstsTotal Trace Requests is the number of HTTP requests using the TRACE method (since service startup). Trace requests allow the client to see what is being received at the end of the request chain and use the information for diagnostic purposes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.81 |
wsTotalUnlockRqstsTotal Unlock Requests is the number of HTTP requests using the UNLOCK method (since service startup). Unlock requests are used to remove locks from files.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.82 |
wsTotalBlkdBandwidthBytesTotal bytes blocked due to bandwidth throttling settings (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.83 |
wsTotalCountFailCALRqstsSSLConnsThis counter is no longer valid. Value will always be zero.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.84 |
wsTotalCountFailCALRqstsAuthdUsrThis counter is no longer valid. Value will always be zero.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.85 |
wsTraceRqstsPerSecThe rate HTTP requests using the TRACE method are made. Trace requests allow the client to see what is being received at the end of the request chain and use the information for diagnostic purposes.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.86 |
wsUnlockRqstsPerSecThe rate HTTP requests using the UNLOCK method are made. Unlock requests are used to remove locks from files.ro Gauge32 .1.3.6.1.4.1.9600.1.2.86.1.87 |
webServiceCache OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.87 |
wscActiveFlushedEntriesActive Flushed Entries are file handles cached in user-mode that will be closed when all current transfers complete.ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.1 |
wscCurrentFileCacheMemoryUsageCurrent number of bytes used for the user-mode file cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.2 |
wscCurrentFilesCachedCurrent number of files whose content is in the user-mode cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.3 |
wscCurrentMetadataCachedCurrent number of metadata information blocks currently in the user-mode cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.4 |
wscCurrentURIsCachedURI information blocks currently in the user-mode cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.5 |
wscFileCacheFlushesThe number of files removed from the user-mode cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.6 |
wscFileCacheHitsTotal number of successful lookups in the user-mode file cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.7 |
wscFileCacheHitsPercentThe ratio of user-mode file cache hits to total cache requests (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.8 |
wscFileCacheMissesTotal number of unsuccessful lookups in the user-mode file cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.9 |
wscKernelCurrentURIsCachedURI information blocks currently cached by the kernel.ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.10 |
wscKernelTotalFlushedURIsThe number of URI information blocks that have been removed from the kernel cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.11 |
wscKernelTotalURIsCachedTotal number of URI information blocks added to the kernel cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.12 |
wscKernelURICacheFlushesKernel URI Cache Flushes (since server startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.13 |
wscKernelURICacheHitsTotal number of successful lookups in the kernel URI cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.14 |
wscKernelURICacheHitsPercentThe ratio of kernel URI cache hits to total cache requests (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.15 |
wscKernelURICacheMissesTotal number of unsuccessful lookups in the kernel URI cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.16 |
wscKernelUriCacheHitsPerSecThe rate of kernel URI Cache hits.ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.17 |
wscMaximumFileCacheMemoryUsageMaximum number of bytes used for user-mode file cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.18 |
wscMetadataCacheFlushesThe number of user-mode metadata cache flushes (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.19 |
wscMetadataCacheHitsTotal number of successful lookups in the user-mode metadata cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.20 |
wscMetadataCacheHitsPercentThe ratio of user-mode metadata cache hits to total cache requests (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.21 |
wscMetadataCacheMissesTotal number of unsuccessful lookups in the user-mode metadata cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.22 |
wscTotalFilesCachedTotal number of files whose content was ever added to the user-mode cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.23 |
wscTotalFlushedFilesTotal Flushed Files is the number of file handles that have been removed from the user-mode cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.24 |
wscTotalFlushedMetadataTotal Flushed Metadata is the number of Metadata information blocks that have been removed from the user-mode cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.25 |
wscTotalFlushedURIsThe number of URI information blocks that have been removed from the user-mode cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.26 |
wscTotalMetadataCachedTotal number of metadata information blocks added to the user-mode cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.27 |
wscTotalURIsCachedTotal number of URI information blocks added to the user-mode cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.28 |
wscURICacheFlushesUser-mode URI Cache flushes (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.29 |
wscURICacheHitsTotal number of successful lookups in the user-mode URI cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.30 |
wscURICacheHitsPercentThe ratio of user-mode URI Cache Hits to total cache requests (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.31 |
wscURICacheMissesTotal number of unsuccessful lookups in the user-mode URI cache (since service startup).ro Gauge32 .1.3.6.1.4.1.9600.1.2.87.32 |
windowsMediaServices OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.88 |
wmsCurCacheDownloadsCurrent Cache Downloads is the current number of active downloads to a cache.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.1 |
wmsCurConnectedPlayersCurrent Connected Players is the current number of players with unicast connections to the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.2 |
wmsCurConnectionQueueLengthCurrent Connection Queue Length is the current number of connection requests that are pending on the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.3 |
wmsCurConnectionRateCurrent Connection Rate is the current number of clients per second that are connecting to the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.4 |
wmsCurFileReadRateKbpsCurrent File Read Rate is the current read rate, in Kbps, for all data files.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.5 |
wmsCurIncomingBandwidthKbpsCurrent Incoming Bandwidth is the current bandwidth, in Kbps, allocated for streams from other servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.6 |
wmsCurLateReadRateCurrent Late Read Rate is the current number of late read operations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.7 |
wmsCurLateSendRateCurrent Late Send Rate is the current number of late write operations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.8 |
wmsCurOutDistAllocBandwidthKbpsCurrent Outgoing Distribution Allocated Bandwidth is the current bandwidth, in Kbps, allocated for streams to distribution servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.9 |
wmsCurOutDistConnectionsCurrent Outgoing Distribution Connections is the current number of connections to distribution servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.10 |
wmsCurOutDistSendRateKbpsCurrent Outgoing Distribution Send Rate is the current send rate, in Kbps, for connections to distribution servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.11 |
wmsCurPlayerAllocBandwidthKbpsCurrent Player Allocated Bandwidth is the current bandwidth, in Kbps, that is allocated for streams to all players.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.12 |
wmsCurPlayerSendRateKbpsCurrent Player Send Rate is the current rate, in Kbps, at which data is being streamed to players.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.13 |
wmsCurStreamErrorRateCurrent Stream Error Rate is the current number of errors per second due to dropped packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.14 |
wmsCurStreamingHTTPPlayersCurrent Streaming HTTP Players is the current number of players being streamed data using the HTTP protocol. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.15 |
wmsCurStreamingMMSPlayersCurrent Streaming MMS Players is the current number of players being streamed data using the MMS protocol. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.16 |
wmsCurStreamingPlayersCurrent Streaming Players is the current number of players being streamed data across all protocols. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.17 |
wmsCurStreamingRTSPPlayersCurrent Streaming RTSP Players is the current number of players that are being streamed data using the RTSP protocol. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.18 |
wmsCurUDPResendRequestsRateCurrent UDP Resend Requests Rate is the current number of requests for UDP resends per second received from clients.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.19 |
wmsCurUDPResendsSentRateCurrent UDP Resends Sent Rate is the current number of UDP resends per second sent to clients.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.20 |
wmsPeakConnectedPlayersPeak Connected Players is the peak number of players that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.21 |
wmsPeakOutDistAllocBandwidthKbpsPeak Outgoing Distribution Allocated Bandwidth is the peak bandwidth, in Kbps, allocated for all streams to distribution servers that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.22 |
wmsPeakOutDistConnectionsPeak Outgoing Distribution Connections is the peak number of distribution servers that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.23 |
wmsPeakOutDistSendRateKbpsPeak Outgoing Distribution Send Rate is the peak rate, in Kbps, at which data was streamed to distribution servers since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.24 |
wmsPeakPlayerAllocBandwidthKbpsPeak Player Allocated Bandwidth is the peak bandwidth, in Kbps, that was allocated for all streams to players since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.25 |
wmsPeakPlayerSendRateKbpsPeak Player Send Rate is the peak rate, in Kbps, at which data was streamed to players since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.26 |
wmsPeakStreamingPlayersPeak Streaming Players is the peak number of players that have been streamed data since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.27 |
wmsTotalAdvertisementsTotal Advertisements is the total number of advertisements that have been streamed from playlists since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.28 |
wmsTotalConnectedPlayersTotal Connected Players is the total number of players that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.29 |
wmsTotalLateReadsTotal Late Reads is the total number of late read operations since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.30 |
wmsTotalLateSendsTotal Late Sends is the total number of late send operations since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.31 |
wmsTotalOutDistBytesSentTotal Outgoing Distribution Bytes Sent is the total number of bytes streamed to all distribution servers since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.32 |
wmsTotalOutDistConnectionsTotal Outgoing Distribution Connections is the total number of distribution servers that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.33 |
wmsTotalPlayerBytesSentTotal Player Bytes Sent is the total number of bytes streamed to all players since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.34 |
wmsTotalServerUptimeTotal Server Uptime is the elapsed time, in seconds, which the Windows Media Services service has been running since it was last started.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.35 |
wmsTotalStreamDenialsTotal Stream Denials is the total number of stream denials since the last time the counter was reset. This includes both denials that occurred due to failure to be authorized or authenticated, as well as denials that occurred because limits were exceeded.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.36 |
wmsTotalStreamErrorsTotal Stream Errors is the total number of stream errors due to dropped packets since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.37 |
wmsTotalStreamTerminationsTotal Stream Terminations is the total number of streams that were terminated due to inactivity or errors since the last time the counter was reset. This includes terminations that occurred because player inactivity and timeout limits were exceeded, as well as terminations that were due to events such as late reads.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.38 |
wmsTotalStreamingPlayersTotal Streaming Players is the total number of players that have been streamed data since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.39 |
wmsTotalUDPResendRequestsTotal UDP Resend Requests is the total number of requests for UDP resends received from clients since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.40 |
wmsTotalUDPResendsSentTotal UDP Resends Sent is the total number of UDP resends sent to clients since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.88.41 |
windowsMediaPublishingPointsTableA table containing performance information for instances of 'Windows Media Publishing Points' objects. SEQUENCE OF WindowsMediaPublishingPointsEntry .1.3.6.1.4.1.9600.1.2.89 |
windowsMediaPublishingPointsEntryPerformance information for one particular instance of 'Windows Media Publishing Points' object. WindowsMediaPublishingPointsEntry .1.3.6.1.4.1.9600.1.2.89.1 |
wmppInstanceInstance name.ro InstanceName (WTCS) .1.3.6.1.4.1.9600.1.2.89.1.1 |
wmppCurConnectedPlayersCurrent Connected Players is the current number of players with unicast connections to the publishing point.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.2 |
wmppCurFileReadRateKbpsCurrent File Read Rate is the current read rate, in Kbps, for all data files.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.3 |
wmppCurLateReadRateCurrent Late Read Rate is the current number of late read operations per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.4 |
wmppCurOutDistAllocBandwidthKbpsCurrent Outgoing Distribution Allocated Bandwidth is the current bandwidth, in Kbps, allocated for streams to all distribution servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.5 |
wmppCurOutDistConnectionsCurrent Outgoing Distribution Connections is the current number of connections to distribution servers.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.6 |
wmppCurPlayerAllocBandwidthKbpsCurrent Player Allocated Bandwidth is the current bandwidth, in Kbps, that is allocated for streams to all players.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.7 |
wmppCurStreamErrorRateCurrent Stream Error Rate is the current number of errors per second due to dropped packets.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.8 |
wmppCurStreamingHTTPPlayersCurrent Streaming HTTP Players is the current number of players being streamed data using the HTTP protocol. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.9 |
wmppCurStreamingMMSPlayersCurrent Streaming MMS Players is the current number of players being streamed data using the MMS protocol. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.10 |
wmppCurStreamingPlayersCurrent Streaming Players is the current number of players being streamed data across all protocols. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.11 |
wmppCurStreamingRTSPPlayersCurrent Streaming RTSP Players is the current number of players being streamed data using the RTSP protocol. This does not include players that are stopped or paused.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.12 |
wmppPeakConnectedPlayersPeak Connected Players is the peak number of players that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.13 |
wmppPeakOutDistAllocBandwdthKbpsPeak Outgoing Distribution Allocated Bandwidth is the peak bandwidth, in Kbps, allocated for all streams to distribution servers that have connected since the last time the server was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.14 |
wmppPeakOutDistConnectionsPeak Outgoing Distribution Connections is the peak number of distribution servers that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.15 |
wmppPeakPlayerAllocBandwidthKbpsPeak Player Allocated Bandwidth is the peak bandwidth, in Kbps, that was allocated for streams to players since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.16 |
wmppPeakStreamingPlayersPeak Streaming Players is the peak number of players that have been streamed data since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.17 |
wmppTotalAdvertisementsTotal Advertisements is the total number of advertisements that have been streamed from playlists since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.18 |
wmppTotalConnectedPlayersTotal Connected Players is the total number of players that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.19 |
wmppTotalFileBytesReadTotal File Bytes Read is the total number of file bytes read.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.20 |
wmppTotalLateReadsTotal Late Reads is the total number of late read operations since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.21 |
wmppTotalOutDistBytesSentTotal Outgoing Distribution Bytes Sent is the total number of bytes streamed to all distribution servers since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.22 |
wmppTotalOutDistConnectionsTotal Outgoing Distribution Connections is the total number of distribution servers that have connected since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.23 |
wmppTotalPlayerBytesSentTotal Player Bytes Sent is the total number of bytes streamed to all players since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.24 |
wmppTotalStreamDenialsTotal Stream Denials is the total number of stream denials since the last time the counter was reset. This includes both denials that occurred due to failure to be authorized or authenticated, as well as denials that occurred because limits were exceeded.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.25 |
wmppTotalStreamErrorsTotal Stream Errors is the total number of stream errors due to dropped packets since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.26 |
wmppTotalStreamTerminationsTotal Stream Terminations is the total number of streams that were terminated due to inactivity or errors since the last time the counter was reset. This includes terminations that occurred because player inactivity and timeout limits were exceeded, as well as terminations that were due to events such as late reads.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.27 |
wmppTotalStreamingPlayersTotal Streaming Players is the total number of players that have been streamed data since the last time the counter was reset.ro Gauge32 .1.3.6.1.4.1.9600.1.2.89.1.28 |
windowsMediaStationServiceThe Windows Media Station Service performance object provides statistics about the Windows Media Station service that provides multicasting, distribution and storage functions for ASF streams. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.90 |
wmssControllersThe number of controllers currently connected to the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.90.1 |
wmssStationsThe number of station objects that currently exist in the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.90.2 |
wmssStreamsThe number of stream objects that currently exist in the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.90.3 |
windowsMediaUnicastServiceThe Windows Media Unicast Service performance object provides statistics about the Windows Media service Unicast service that provides unicasting functions for Advanced Streaming Format (ASF) streams. OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.91 |
wmusActiveLiveUnicastStreamsThe number of Live Unicast streams that are being streamed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.1 |
wmusActiveStreamsThe number of streams that are being streamed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.2 |
wmusActiveTCPStreamsThe number of TCP streams that are being streamed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.3 |
wmusActiveUDPStreamsThe number of UDP streams that are being streamed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.4 |
wmusAggregateReadRateThe total, aggregate rate (bytes/sec) of file reads.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.5 |
wmusAggregateSendRateThe total, aggregate rate (bytes/sec) of stream transmission.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.6 |
wmusAllocatedBandwidthThe bandwidth (bytes/sec) currently allocated by clients.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.7 |
wmusAuthenticationRequestsThe number of times an authentication plugin is called to authenticate a client. Depending on the protocol in use, either HTTP or Microsoft Media Server (MMS), a single client may be authenticated once or several times when accessing each piece of unicast coro Gauge32 .1.3.6.1.4.1.9600.1.2.91.8 |
wmusAuthenticationsDeniedThe number of times clients are denied access to unicast content by authentication plugins. Clients are denied access by an authentication plugin when their IDs cannot be verified, no user accounts exist, or the authentication plugin is not working.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.9 |
wmusAuthorizationRequestsThe number of times an authorization plugin is called to authorize a client. Each client action, such as opening or playing unicast content, is separately authorized; therefore, the total number of authorization requests is greater than the number of connectero Gauge32 .1.3.6.1.4.1.9600.1.2.91.10 |
wmusAuthorizationsRefusedThe number of times clients are denied access to unicast content by authorization plugins. Plugins will deny access to clients based on their function; for example, a billing plugin may deny client access to unicast content if the user account contains insuffro Gauge32 .1.3.6.1.4.1.9600.1.2.91.11 |
wmusConnectedClientsThe number of clients connected to this server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.12 |
wmusConnectionRateThe rate at which clients are connecting to the server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.13 |
wmusHTTPStreamsThe number of HTTP streams being streamed.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.14 |
wmusHTTPStreamsReadingHeaderThe number of clients connected to the server via HTTP and reading a file header, but not yet streaming the unicast content. HTTP Streams Reading Header and HTTP Streams Reading Body equal the total number of clients connected to the server via HTTP, as indicro Gauge32 .1.3.6.1.4.1.9600.1.2.91.15 |
wmusHTTPStreamsStreamingBodyThe number of connected clients that have read the file header and are actively streaming unicast content via HTTP. HTTP Streams Reading Body and HTTP Streams Reading Header equal the total number of clients connected to the server via HTTP, as indicated by Hro Gauge32 .1.3.6.1.4.1.9600.1.2.91.16 |
wmusLateReadsThe number of late read completions per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.17 |
wmusPendingConnectionsThe number of clients attempting to connect to the server but are not yet connected. This number may be high if the server is running near maximum capacity and cannot process a large number of connection requests in a timely manner.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.18 |
wmusPluginErrorsThe number of times plugins failed to perform their function. For example, a plugin couldn't reach its user database, the plugin crashed, and so on.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.19 |
wmusPluginEventsThe number of events reported to plugins. An indicator of how much the server is using external plugins.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.20 |
wmusSchedulingRateThe rate (tasks/sec) at which tasks are being scheduled.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.21 |
wmusStreamErrorsThe cumulative number of errors occuring per second.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.22 |
wmusStreamTerminationsThe rate at which streams are being terminated due to errors.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.23 |
wmusUDPResendRequestsThe number of times clients ask the server to resend a data packet that was received in error. This value may be high when the server cannot send packets via UDP reliably. A good indicator of server or network overload.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.24 |
wmusUDPResendsSentThe number of UDP Resend Requests processed by the server. Not all UDP Resend Requests are processed if the server is under a heavy load.ro Gauge32 .1.3.6.1.4.1.9600.1.2.91.25 |
winsServer OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.92 |
winsSrvrFailedQueriesPerSecTotal Number of Failed Queries/secro Gauge32 .1.3.6.1.4.1.9600.1.2.92.1 |
winsSrvrFailedReleasesPerSecTotal Number of Failed Releases/secro Gauge32 .1.3.6.1.4.1.9600.1.2.92.2 |
winsSrvrGroupConflictsPerSecGroup Conflicts/sec is the rate at which group registration received by the WINS server resulted in conflicts with records in the database.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.3 |
winsSrvrGroupRegsPerSecGroup Registrations/sec is the rate at which group registration are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.4 |
winsSrvrGroupRenewalsPerSecGroup Renewals/sec is the rate at which group renewals are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.5 |
winsSrvrQueriesPerSecTotal Number of Queries/sec is the rate at which queries are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.6 |
winsSrvrReleasesPerSecTotal Number of Releases/sec is the rate at which releases are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.7 |
winsSrvrSuccessfulQueriesPerSecTotal Number of Successful Queries/secro Gauge32 .1.3.6.1.4.1.9600.1.2.92.8 |
winsSrvrSuccessfulReleasesPerSecTotal Number of Successful Releases/secro Gauge32 .1.3.6.1.4.1.9600.1.2.92.9 |
winsSrvrTotalNumConflictsPerSecTotal Number of Conflicts/sec is the sum of the Unique and Group conflicts per sec. This is the total rate at which conflicts were seen by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.10 |
winsSrvrTotalNumRegsPerSecTotal Number of Registrations/sec is the sum of the Unique and Group registrations per sec. This is the total rate at which registration are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.11 |
winsSrvrTotalNumRenewalsPerSecTotal Number of Renewals/sec is the sum of the Unique and Group renewals per sec. This is the total rate at which renewals are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.12 |
winsSrvrUniqueConflictsPerSecUnique Conflicts/sec is the rate at which unique registrations/renewals received by the WINS server resulted in conflicts with records in the database.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.13 |
winsSrvrUniqueRegsPerSecUnique Registrations/sec is the rate at which unique registration are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.14 |
winsSrvrUniqueRenewalsPerSecUnique Renewals/sec is the rate at which unique renewals are received by the WINS server.ro Gauge32 .1.3.6.1.4.1.9600.1.2.92.15 |
wmiObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9600.1.2.93 |
wmiObjectsHiPerfClassesShows High Performance Classesro Gauge32 .1.3.6.1.4.1.9600.1.2.93.1 |
wmiObjectsHiPerfValidityShows if High Performance Classes are validro Gauge32 .1.3.6.1.4.1.9600.1.2.93.2 |