ICOTERA-I6800-SERIES
AI MIB Summary
The ICOTERA-I6800-SERIES MIB module provides the SMI definitions required to monitor and manage Icotera I6800 series optical transport network equipment via SNMP. It enables the retrieval of operational status, port statistics, and hardware performance metrics specific to these optical transport devices.
The Icotera management information base SMI definitions
Main OID:
icotera.1.3.6.1.4.1.29865
48
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
icoteraThe Icotera management information base SMI definitions MODULE-IDENTITY .1.3.6.1.4.1.29865 |
ictIGW4kDevice related SNMP options OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12 |
ictMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.2 |
ictMgmtMibThe MIB which allows managing the CPE OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.2.1 |
ictFwUpgThe MIB of firmware upgrade OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.2.1.1 |
upgUrlPath to file with firmware.rw OCTET STRING .1.3.6.1.4.1.29865.12.2.1.1.1 |
upgExecuteMIB responsible for trigerring firmware upgrade.rw Enumeration .1.3.6.1.4.1.29865.12.2.1.1.2 |
upgStatusMIB show upgrade status.ro OCTET STRING .1.3.6.1.4.1.29865.12.2.1.1.3 |
ictCfgUpdateThe MIB of configuration update OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.2.1.2 |
cfgTftpPathPath to cofiguration file stored at TFTP server.rw OCTET STRING .1.3.6.1.4.1.29865.12.2.1.2.1 |
cfgExecuteMIB responsible for trigerring config upload at CPE.rw Enumeration .1.3.6.1.4.1.29865.12.2.1.2.2 |
cfgStatusMIB show configuration upgrade status.ro OCTET STRING .1.3.6.1.4.1.29865.12.2.1.2.3 |
ictRebootThe MIB responsible for CPE reboot OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.2.1.3 |
performCpeRebootMIB responsible for trigerring CPE reboot.rw Enumeration .1.3.6.1.4.1.29865.12.2.1.3.2 |
ictServices OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.3 |
ictCatvThe MIB module for managing Icotera services OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.3.1 |
ictCatvMibThe MIB module for managing Icotera services OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.3.1.1 |
catvModuleAdminStatusThe administrative status of the module, this can be enabled(1) or
disabled(0).ro Enumeration .1.3.6.1.4.1.29865.12.3.1.1.1 |
catvModuleFilterPackage filter selected for catv modulero Enumeration .1.3.6.1.4.1.29865.12.3.1.1.2 |
catvModuleRflevelRF signal amplification on CATV outputro Enumeration .1.3.6.1.4.1.29865.12.3.1.1.3 |
catvModuleLowSignalLow signal level of catv ledro INTEGER .1.3.6.1.4.1.29865.12.3.1.1.4 |
catvModuleSignalDetectedTells whether CATV signal is detected: yes(1) - detected, no(0) - not detected.ro Enumeration .1.3.6.1.4.1.29865.12.3.1.1.5 |
catvModulePowerLevelCurrent CATV power level. It can have one of the following values:
- any integer between -1299 and 199 when the power level is higher than -13.00 and lower than 2.00,
which is the power level in dBm multiplied by 100.
- a value of -2147483648 when the power level is lower than -13 dBm
- a value of 2147483647 when the power level is higher than 2 dBm.ro INTEGER .1.3.6.1.4.1.29865.12.3.1.1.6 |
catvModuleRfOutputLevelParameter is supported by special CATV solution. No data will be provided if CPE is not compatible.
Calculated RF output value which should be expected.
- Expected value is presented in dBuV multiplied by 100.
- if value of 0 is received, either CATV fiber is not connected or CATV is turned off.ro INTEGER .1.3.6.1.4.1.29865.12.3.1.1.7 |
catvModuleOmiParameter is supported by special CATV solution. No data will be provided if CPE is not compatible.
Currently OMI value set at CPE.ro INTEGER .1.3.6.1.4.1.29865.12.3.1.1.8 |
ictVoipThe MIB module for checking VoIP service OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.3.2 |
ictVoipMibThe MIB module for checking VoIP service status OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.3.2.1 |
voipFXSport1The administrative status of the FXS port 1ro OCTET STRING .1.3.6.1.4.1.29865.12.3.2.1.1 |
voipFXSport2The administrative status of the FXS port 2ro OCTET STRING .1.3.6.1.4.1.29865.12.3.2.1.2 |
ictDuplex OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.4 |
ictDuplexMibInitial release. OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.4.15 |
duplexConfig OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.4.15.1 |
ifDuplexTableA table containing interface duplex status. SEQUENCE OF IfDuplexEntry .1.3.6.1.4.1.29865.12.4.15.1.1 |
ifDuplexEntryStatus for a specific interface using ethernet-like medium. IfDuplexEntry .1.3.6.1.4.1.29865.12.4.15.1.1.1 |
ifDuplexIndexAn index value that uniquely identifies an
interface to an ethernet-like medium. The
interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.29865.12.4.15.1.1.1.1 |
ifDuplexStatusThe current duplex mode of operation of the interface. 'unknown'
indicates that the current duplex mode could not be determined.ro Enumeration .1.3.6.1.4.1.29865.12.4.15.1.1.1.2 |
ictReset OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.5 |
ictFacRstThe MIB parent for CPE reset OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.5.1 |
ictFacRstMibThe MIB which makes Factory Reset of CPE OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.5.1.1 |
performFactoryResetStatus of FactoryReset feature.rw Enumeration .1.3.6.1.4.1.29865.12.5.1.1.1 |
ictDhcp OBJECT IDENTIFIER .1.3.6.1.4.1.29865.12.6 |
ictDHCPsrvTable of DHCPd leases. SEQUENCE OF IctDHCPsrvLeases .1.3.6.1.4.1.29865.12.6.1 |
ictDHCPsrvLeasesAn entry in the table,
containing information
about lease. IctDHCPsrvLeases .1.3.6.1.4.1.29865.12.6.1.1 |
ictDHCPsrvIndexA unique value for LEASE index.ro INTEGER .1.3.6.1.4.1.29865.12.6.1.1.1 |
ictMacAddressMAC address of Lease.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.29865.12.6.1.1.2 |
ictExpireLease time until Expirero INTEGER .1.3.6.1.4.1.29865.12.6.1.1.3 |
ictIPaddressIP address learned from host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.29865.12.6.1.1.4 |
ictHostNameHostname.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.29865.12.6.1.1.5 |