IB-TRAPONE-MIB

AI MIB Summary

The IB-TRAPONE-MIB defines SNMP trap notifications for Infoblox One products, enabling network monitoring systems to receive asynchronous alerts regarding critical events such as service failures, configuration changes, and system state transitions. These traps facilitate real-time fault detection and automated incident response for Infoblox DNS, DHCP, and IPAM infrastructure components.

This is the MIB module for trap definitions for Infoblox one products.

Main OID:

ibTrapOneModule.1.3.6.1.4.1.7779.3.1.1.1.1

Objects

Active

Status

Dependencies

Imported Objects

SNMPv2-SMI

SNMPv2-TC

IB-SMI-MIB

Objects

18 total

Object Name	Syntax	OID
ibTrapOneModuleThis is the MIB module for trap definitions for Infoblox one products. MODULE-IDENTITY `.1.3.6.1.4.1.7779.3.1.1.1.1`	MODULE-IDENTITY	`.1.3.6.1.4.1.7779.3.1.1.1.1`
ibEquipmentFailureTrapThis event is generated for any equipment failure. NOTIFICATION-TYPE `.1.3.6.1.4.1.7779.3.1.1.1.1.1`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.7779.3.1.1.1.1.1`
ibProcessingFailureTrapThis trap is generated whenever a software failure is detected. NOTIFICATION-TYPE `.1.3.6.1.4.1.7779.3.1.1.1.1.2`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.7779.3.1.1.1.1.2`
ibThresholdCrossingEventThis event is generated whenever a threshold crossing has occurred for the first time. NOTIFICATION-TYPE `.1.3.6.1.4.1.7779.3.1.1.1.1.3`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.7779.3.1.1.1.1.3`
ibStateChangeEventThis event is generated whenever an object state change has occurred. NOTIFICATION-TYPE `.1.3.6.1.4.1.7779.3.1.1.1.1.4`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.7779.3.1.1.1.1.4`
ibProcStartStopTrapThis trap is generated when a process is started or stopped normally. NOTIFICATION-TYPE `.1.3.6.1.4.1.7779.3.1.1.1.1.5`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.7779.3.1.1.1.1.5`
ibNotificationVarBind OBJECT IDENTIFIER `.1.3.6.1.4.1.7779.3.1.1.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.7779.3.1.1.1.2`
ibNodeNameIt is the node name (node ip address) the trap occurred. This node name may or may not the same as the node sending out the trap. IbNode (IB-SMI-MIB) `.1.3.6.1.4.1.7779.3.1.1.1.2.1`	IbNode (IB-SMI-MIB)	`.1.3.6.1.4.1.7779.3.1.1.1.2.1`
ibTrapSeverityIt contains the serverity of the trap. Enumeration `.1.3.6.1.4.1.7779.3.1.1.1.2.2`	Enumeration	`.1.3.6.1.4.1.7779.3.1.1.1.2.2`
ibObjectNameIt describes the object for which the trap is generated. DisplayString (SIZE `.1.3.6.1.4.1.7779.3.1.1.1.2.3`	DisplayString (SIZE	`.1.3.6.1.4.1.7779.3.1.1.1.2.3`
ibProbableCauseIt describes the probable cause of a problem . IbProbableCause `.1.3.6.1.4.1.7779.3.1.1.1.2.4`	IbProbableCause	`.1.3.6.1.4.1.7779.3.1.1.1.2.4`
ibSubsystemNameIt describes the subsystem for which the trap is generated. DisplayString (SIZE `.1.3.6.1.4.1.7779.3.1.1.1.2.5`	DisplayString (SIZE	`.1.3.6.1.4.1.7779.3.1.1.1.2.5`
ibCurThresholdValueIt contains the current value of a threshold counter. INTEGER `.1.3.6.1.4.1.7779.3.1.1.1.2.6`	INTEGER	`.1.3.6.1.4.1.7779.3.1.1.1.2.6`
ibThresholdHighIt contains the value for threshold high INTEGER `.1.3.6.1.4.1.7779.3.1.1.1.2.7`	INTEGER	`.1.3.6.1.4.1.7779.3.1.1.1.2.7`
ibThresholdLowIt contains the value for threshold low INTEGER `.1.3.6.1.4.1.7779.3.1.1.1.2.8`	INTEGER	`.1.3.6.1.4.1.7779.3.1.1.1.2.8`
ibPreviousStateIt contains the value for previous state IbState `.1.3.6.1.4.1.7779.3.1.1.1.2.9`	IbState	`.1.3.6.1.4.1.7779.3.1.1.1.2.9`
ibCurrentStateIt contains the value for current state IbState `.1.3.6.1.4.1.7779.3.1.1.1.2.10`	IbState	`.1.3.6.1.4.1.7779.3.1.1.1.2.10`
ibTrapDescIt contains the description of the trap. IbString (IB-SMI-MIB) `.1.3.6.1.4.1.7779.3.1.1.1.2.11`	IbString (IB-SMI-MIB)	`.1.3.6.1.4.1.7779.3.1.1.1.2.11`