HYTERA-REPEATER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HYTERA-REPEATER-MIB.
170
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
170 total| Object Name |
|---|
hyteraRepeaterMIB OBJECT IDENTIFIER .1.3.6.1.4.1.40297 |
RFC1155-SMI Unknown .1.3.6.1.4.1.40297 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1 |
repeater OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2 |
rptRealTimeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.1 |
rptAlarmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.1.1 |
rptVoltageAlarmThe voltage alarm.
normal(0), low voltage alarm(1), high voltage alarm(2), abnormal(3).
The abnormal condition is used for RD960. For the RD960 do not distinguish
low voltage alarm and high voltage alarm, we use abnormal to replace them.ro INTEGER .1.3.6.1.4.1.40297.1.2.1.1.1 |
rptTemperatureAlarmThe temperature alarm.
normal(0), low temperature alarm(1), high temperature alarm(2).ro INTEGER .1.3.6.1.4.1.40297.1.2.1.1.2 |
rptFanAlarmThe fan alarm.
normal(0), alarm(1).
The object is not supported yet.ro INTEGER .1.3.6.1.4.1.40297.1.2.1.1.3 |
rptForwardAlarmThe forward power alarm.
undefined(-1), normal(0), alarm(1).
The object is not supported yet.ro INTEGER (-1..1) .1.3.6.1.4.1.40297.1.2.1.1.4 |
rptReflectedAlarmThe reflected power alarm.
undefined(-1), normal(0), alarm(1).
The object is not supported yet.ro INTEGER (-1..1) .1.3.6.1.4.1.40297.1.2.1.1.5 |
rptVswrAlarmThe voltage standing wave radio alarm.
normal(0), alarm(1).ro INTEGER .1.3.6.1.4.1.40297.1.2.1.1.6 |
rptTxPllAlarmThe transmitting PLL alarm.
normal(0), alarm(1).ro INTEGER .1.3.6.1.4.1.40297.1.2.1.1.7 |
rptRxPllAlarmThe receiving PLL alarm.
normal(0), alarm(1).ro INTEGER .1.3.6.1.4.1.40297.1.2.1.1.8 |
rptBatteryVoltageAlarmThe battery voltage alarm.
normal(0), abnormal(1).ro INTEGER .1.3.6.1.4.1.40297.1.2.1.1.9 |
rptDataInfo OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.1.2 |
rptVoltageThe voltage.
It should be changed to float format.
If the repeater is rd620 and rd960, the value is invalid.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.1 |
rptPaTempratureThe temperature.
It should be changed to float format.
The value is invalid, if the repeater is rd960.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.2 |
rptFanSpeedThe fan speed.
The object is not supported yet.ro INTEGER .1.3.6.1.4.1.40297.1.2.1.2.3 |
rptVswrThe VSWR.
It should be changed to float format.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.4 |
rptTxFwdPowerThe forward power.
It should be changed to float format.
The value is invalid, if the repeater is rd960 or rd620.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.5 |
rptTxRefPowerThe reflected power.
It should be changed to float format.
The value is invalid, if the repeater is rd960 or rd620.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.6 |
rptDataInfoBak1The backup object.
The object is not supported yet.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.7 |
rptDataInfoBak2The backup object.
The object is not supported yet.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.8 |
rptSlot1RssiThe RSSI value of slot1.
unit: dB.ro INTEGER .1.3.6.1.4.1.40297.1.2.1.2.9 |
rptSlot2RssiThe RSSI value of slot2.
unit: dB.
The value is valid only in digital model.ro INTEGER .1.3.6.1.4.1.40297.1.2.1.2.10 |
rptSupplyPowerTypeThe type of power.
DC(0), Battery(1).ro INTEGER .1.3.6.1.4.1.40297.1.2.1.2.11 |
rptBatteryConnectThe battery connecting condition.
disconnected(0), connected(1).ro INTEGER .1.3.6.1.4.1.40297.1.2.1.2.12 |
rptBatteryVoltageThe battery voltage.
The object is not supported yet.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.1.2.13 |
rptControl OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.2 |
rptRestartRestart the repeater.
do nothing(0), reset(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.2.1 |
rptChannelNumberThe current channel number in the zone.rw INTEGER .1.3.6.1.4.1.40297.1.2.2.2 |
rptChannelTypeThe current channel type.
digital(0), analog(1), mixed(2).ro INTEGER .1.3.6.1.4.1.40297.1.2.2.3 |
rptControlObjBak1The backup object.
The object is not supported yet.ro INTEGER .1.3.6.1.4.1.40297.1.2.2.4 |
rptTxPowerLevelThe transmit power level.
high(0), low(2).rw INTEGER (0|2) .1.3.6.1.4.1.40297.1.2.2.5 |
rptKnockdownThe status of repeating.
repeating(0), knockdown(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.2.6 |
rptRadioStateThe status of the repeater's normal function.
enable(0), disable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.2.7 |
rptSnmpTrapIpThe SNMP trapping IP address.
The default value is 230.37.0.0.rw IpAddress .1.3.6.1.4.1.40297.1.2.2.8 |
rptSnmpTrapPortThe SNMP trapping port.ro INTEGER (162) .1.3.6.1.4.1.40297.1.2.2.9 |
rptchannelParaTableThe table of channel's parameters relevant to the repeater's channels. SEQUENCE OF ChannelParaEntry .1.3.6.1.4.1.40297.1.2.2.10 |
channelParaEntryThe channel's parameters for one of the repeater's channels. ChannelParaEntry .1.3.6.1.4.1.40297.1.2.2.10.1 |
channelParaIndexThe index of the table which uniquely identifies the channel's parameters.ro INTEGER .1.3.6.1.4.1.40297.1.2.2.10.1.1 |
actChannelAliasThe channel alias.
It is an unicode stringro OCTET STRING .1.3.6.1.4.1.40297.1.2.2.10.1.2 |
actChannelTypeThe channel type.
digital(0), analog(1), mixed(2).ro INTEGER .1.3.6.1.4.1.40297.1.2.2.10.1.3 |
actTxPowerThe transmit power level.
high(0), low(2).ro INTEGER .1.3.6.1.4.1.40297.1.2.2.10.1.4 |
actChannelNoThe channel number in the repeater's zone.ro INTEGER .1.3.6.1.4.1.40297.1.2.2.10.1.5 |
actChannelSubNoThe channel number in the group of same type.ro INTEGER .1.3.6.1.4.1.40297.1.2.2.10.1.6 |
rptForbidThe status of the repeater's all function.
nomal(0), forbid(1).
If the repeater is forbided, you can only wake up it by setting
the rptRadioStatus object to 0 in local RDAC model.rw INTEGER .1.3.6.1.4.1.40297.1.2.2.11 |
rptLog OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.3 |
logTableThe table of alarm records. SEQUENCE OF LogEntry .1.3.6.1.4.1.40297.1.2.3.1 |
logEntryThe record's content. LogEntry .1.3.6.1.4.1.40297.1.2.3.1.1 |
logIndexThe index of the table which uniquely identifies the alram record.ro INTEGER .1.3.6.1.4.1.40297.1.2.3.1.1.1 |
alarmNameThe alarm name.
temperature alarm(0), fan alarm(1), vswr alarm(2), low forward power alarm(3),
low voltage alarm(4), high voltage alarm(5), tx unlock alarm(6),
rx unlock alarm(7), battery voltage alarm(8), invalid(65535).ro INTEGER (0..9|65535) .1.3.6.1.4.1.40297.1.2.3.1.1.2 |
alarmStatusThe alarm status.
alarm recove(0), alarm happen(1), invalid(65535).ro INTEGER (0..1|65535) .1.3.6.1.4.1.40297.1.2.3.1.1.3 |
logTimeThe alarm time.
unit: second.
The time is the time lapsed since the repeater starting up. If the value
is -1, the record is invalid.ro INTEGER (-1..134217728) .1.3.6.1.4.1.40297.1.2.3.1.1.4 |
clearLogClear the log.
do nothing(0), clear log(0).rw INTEGER .1.3.6.1.4.1.40297.1.2.3.2 |
recordCountThe number of records.ro INTEGER .1.3.6.1.4.1.40297.1.2.3.3 |
latestRecordPositionThe row number of the latest record.
If the value is 0, there is no valid record in the table.ro INTEGER .1.3.6.1.4.1.40297.1.2.3.4 |
rptSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.4 |
rptModelNameThe model name.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.1 |
rptModelNoThe model number.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.2 |
rptFirmwareVersionThe firmware version.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.3 |
rptRcdbVersionThe RCDB version.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.4 |
rptSerialNoThe serial number.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.5 |
rptRadioAliasThe repeater alias.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.6 |
rptRadioIDThe ID of the repeater.ro INTEGER .1.3.6.1.4.1.40297.1.2.4.7 |
rptCurChannelTypeThe type of the wroking channel.
digital(0), analog(1), mixed(2).ro INTEGER .1.3.6.1.4.1.40297.1.2.4.8 |
rptChannelNameThe name of the current channel.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.9 |
rptCurTxFreqThe current transmitting frequency.
unit: Hz.ro INTEGER .1.3.6.1.4.1.40297.1.2.4.10 |
rptCurRxFreqThe current receiving frequency.
unit: Hz.ro INTEGER .1.3.6.1.4.1.40297.1.2.4.11 |
rptWorkStateThe work status of the repeater.
receive(0), transmit(1).ro INTEGER .1.3.6.1.4.1.40297.1.2.4.12 |
rptCurZoneAliasThe alias of the current zone.
It is an unicode string.ro OCTET STRING .1.3.6.1.4.1.40297.1.2.4.13 |
rptConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5 |
rptBasicSetting OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.1 |
powerOn OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.1.1 |
designatedPowerOnChnDesignate the power on channel.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.1.1 |
powerOnChannelNoThe the power on channel number.
invalid(65535).rw INTEGER (0..15|65535) .1.3.6.1.4.1.40297.1.2.5.1.1.2 |
microphone OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.1.2 |
internalMicGainThe gain of the internal microphone.
It is double of the real value.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.2.1 |
externalMicGainThe gain of the external microphone.
It is double of the real value.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.2.2 |
multiCTCCDCTableThe table of subaudio frequency. SEQUENCE OF MultiCTCCDCEntry .1.3.6.1.4.1.40297.1.2.5.1.3 |
multiCTCCDCEntryThe subaudio frequency. MultiCTCCDCEntry .1.3.6.1.4.1.40297.1.2.5.1.3.1 |
ctcssIndexThe index of the table which uniquely identifies the subaudio frequency.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.1.3.1.1 |
txCtcssFrequencyThe transmitting subaudio frequency.
The value is limitted to the range. The range is changed with the type:
0 (txCtcssType: none)
19~492 (txCtcssType: CDCSS or CDCSS invert)
670~2541 (txCtcssType: CTCSS)
The value is 10 times of the real value when the type is CTCSS.
The value in first row is unable to be set.
It's not able to be set, unless the rxCtcssType in the same row is not none.
It will be set to the matched minimum available value automatically, when the
txCtcssType in the same row is changed.rw INTEGER (0|19..492|670..2541) .1.3.6.1.4.1.40297.1.2.5.1.3.1.2 |
txCtcssTypeThe type of the transmitting subaudio frequency.
none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
The value in first row is unable to be set.
It's not able to be set, unless the rxCtcssType in the same row is not none.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.3.1.3 |
rxCtcssFrequencyThe receiving subaudio frequency.
The value is limitted to the range and is not allowed to duplicate but 0.
The range is changed with the type:0
0 (rxCtcssType: none)
19~492 (rxCtcssType: CDCSS or CDCSS invert)
670~2541 (rxCtcssType: CTCSS)
The value is 10 times of the real value when the type is CTCSS.
The value in first row is unable to be set.
It will be set to the matched minimum available value automatically, when the
rxCtcssType in the same row is changed.rw INTEGER (0|19..492|670..2541) .1.3.6.1.4.1.40297.1.2.5.1.3.1.4 |
rxCtcssTypeThe type of the receiving subaudio frequency.
none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).
It must be set according to line sequence.
The value in first row is unable to be set.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.3.1.5 |
audioPriority OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.1.4 |
pathPriorityThe transmit path priority.
PTT request(0), repeat request(1), first come first send(2).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.4.1 |
pttPriorityThe PTT priority.
external PTT(0), front PTT(1), remote PTT(2), first come first send(3).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.4.2 |
jitterBufferLenthThe jitter buffer length.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.5 |
analogCallHangTimeThe analog call hang time.
unit: second.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.6 |
repeatRequestPriorityThe repeat request priority.
local repeating(0), IP connect repeating(1), first come first send(2).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.1.7 |
rptDigitalChannelSetting OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.2 |
digitalChnTableThe table of digital channel's configuration parameters relevant to the
repeater's digital channels. SEQUENCE OF DigitalChnEntry .1.3.6.1.4.1.40297.1.2.5.2.1 |
digitalChnEntryThe digital channel's configuration parameters for one of the repeater's digital channels. DigitalChnEntry .1.3.6.1.4.1.40297.1.2.5.2.1.1 |
digitalChnIndexThe index of the table which uniquely identifies the digital channel's parameter.
It also represents the channel number which is counted from 1.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.2.1.1.1 |
digitalColorCodeThe color code.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.2.1.1.2 |
digitalIpMultisiteConnectThe multisite connecting based on network.
None(0), slot1(1), slot2(2), slot1&slot2(3).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.2.1.1.3 |
digitalReceiveFrequencyThe receiving frequency.
unit: Hz.
The value is limitted by the assigned frequency range and the last digit
should be 0 or 5.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.2.1.1.4 |
digitalTransmitFrequencyThe transmitting frequency.
unit: Hz.
The value is limitted by the assigned frequency range and the last digit
should be 0 or 5.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.2.1.1.5 |
digitalTxContactNameThe row number of transmitting contact name.
none(0), row number(1~512).
The value is limmited by the number of rows in contact table.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.2.1.1.6 |
rptAnalogChannelSetting OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.3 |
analogChnTableThe table of analog channel's configuration parameters relevant to the
repeater's analog channels. SEQUENCE OF AnalogChnEntry .1.3.6.1.4.1.40297.1.2.5.3.1 |
analogChnEntryThe analog channel's configuration parameters for one of the repeater's analog channels. AnalogChnEntry .1.3.6.1.4.1.40297.1.2.5.3.1.1 |
analogChnIndexThe index of the table which uniquely identifies the analog channel's parameters.
It also represents the channel number which is counted from 1.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.1 |
analogCarrierSquelchLevelThe carrier squelch level.
open(0), normal(1), tight(2)rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.2 |
analogMultiCtcCdcThe multiCtcCdc control.
disable(0), enable(1).
It can't be set to enable until the analogRxCtcCdcType is not 0
and there is some valid data is multiCTCCDCTable.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.3 |
analogPreEmpThe pre-emphasis control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.4 |
analogScramblerThe scrambler control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.5 |
analogFlatAudioThe flat audio control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.6 |
analogReceiveFrequencyThe receiving frequency.
unit: Hz.
The value is limitted by the assigned frequency range and the last digit
should be 0 or 5.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.7 |
analogRxCtcCdcTypeThe type of receiving subaudio frequency.
none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.8 |
analogRxCtcssThe value of receiving CTCSS.
It's 10 times of the real value.
65535 is an invalid value.
The value is restricted by analogRxCtcCdcType.rw INTEGER (670..2541|65535) .1.3.6.1.4.1.40297.1.2.5.3.1.1.9 |
analogRxCdcssThe value of receiving CDCSS.
65535 is an invalid value.
The value is restricted by analogRxCtcCdcType.rw INTEGER (19..492|65535) .1.3.6.1.4.1.40297.1.2.5.3.1.1.10 |
analogTransmitFrequencyThe transmitting frequency.
unit: Hz.
The value is limitted by the assigned frequency range and the last digit
should be 0 or 5.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.11 |
analogTxCtcCdcTypeThe type of transmitting subaudio frequency.
none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.3.1.1.12 |
analogTxCtcssThe value of transmitting CTCSS.
It's 10 times of the real value.
65535 is an invalid value.
The value is limited by analogTxCtcCdcType.rw INTEGER (670..2541|65535) .1.3.6.1.4.1.40297.1.2.5.3.1.1.13 |
analogTxCdcssThe value of transmitting CDCSS.
65535 is an invalid value.
The value is restricted by analogTxCtcCdcType.rw INTEGER (19..492|65535) .1.3.6.1.4.1.40297.1.2.5.3.1.1.14 |
rptMixedChannelSetting OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.4 |
mixedChnTableThe table of mixed channel's configuration parameters relevant to the
repeater's mixed channels. SEQUENCE OF MixedChnEntry .1.3.6.1.4.1.40297.1.2.5.4.1 |
mixedChnEntryThe mixed channel's configuration parameters for one of the repeater's mixed channels. MixedChnEntry .1.3.6.1.4.1.40297.1.2.5.4.1.1 |
mixedChnIndexThe index of the table which uniquely identifies the mixed channel's parameters.
It also represents the channel number which is counted from 1.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.1 |
mixedCarrierSquelchLevelThe carrier squelch level control.
open(0), normal(1), tight(2).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.2 |
mixedTxContactNameThe row number of transmitting contact name.
none(0), row number(1~512).
The value is limited to the numbers of row in the contact table.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.3 |
mixedIpMultisiteConnectThe multisite connecting based on network.
none(0), slot1(1), slot 2(2), slot1&slot2(3).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.4 |
mixedColorCodeThe color code.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.5 |
mixedTxChannelTypeThe type of transmitting channel.
digital(0), analog(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.6 |
mixedPreEmpThe pre-emphasis control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.7 |
mixedScramblerThe scrambler control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.8 |
mixedFlatAudioThe flat audio control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.9 |
mixedMultiCtcCdcThe multiCtcCdc control.
disable(0), enable(1).
It can't be set to enable until the mixedRxCtcCdcType is not 0
and there is some valid data in multiCTCCDC Table.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.10 |
mixedReceiveFrequencyThe receiving frequency.
unit: Hz.
The value is limitted by the assigned frequency range and the last digit
should be 0 or 5.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.11 |
mixedRxCtcCdcTypeThe type of receiving subaudio frequency.
none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.12 |
mixedRxCtcssThe value of receiving CTCSS.
It's 10 times of the real value.
65535 is an invalid value.
The value is restricted by analogRxCtcCdcType.rw INTEGER (670..2541|65535) .1.3.6.1.4.1.40297.1.2.5.4.1.1.13 |
mixedRxCdcssThe value of receiving CDCSS.
65535 is an invalid value.
The value is restricted by analogRxCtcCdcType.rw INTEGER (19..492|65535) .1.3.6.1.4.1.40297.1.2.5.4.1.1.14 |
mixedTransmitFrequencyThe transmitting frequency.
unit: Hz.
The value is limitted by the assigned frequency range and the last digit
should be 0 or 5.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.15 |
mixedTxCtcCdcTypeThe type of transmitting subaudio frequency.
none(0), CTCSS(1), CDCSS(2), CDCSS invert(3).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.4.1.1.16 |
mixedTxCtcssThe value of transmitting CTCSS.
It's 10 times of the real value.
65535 is an invalid value.
The value is restricted by analogTxCtcCdcType.rw INTEGER (670..2541|65535) .1.3.6.1.4.1.40297.1.2.5.4.1.1.17 |
mixedTxCdcssThe value of transmitting CDCSS.
65535 is an invalid value.
The value is restricted by analogTxCtcCdcType.rw INTEGER (19..492|65535) .1.3.6.1.4.1.40297.1.2.5.4.1.1.18 |
rptServiceSetting OBJECT IDENTIFIER .1.3.6.1.4.1.40297.1.2.5.5 |
groupCallHangTimeThe group call hang time.
unit: second.
The value is 2 times of the real value and should not be greater than the
value of sit.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.1 |
privateCallHangTimeThe private call hang time.
unit: second.
The value is 2 times of the real value and should not be greater than the
value of sit.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.2 |
emergencyCallHangTimeThe emergency call hang time.
unit: second.
The value is 2 times of the real value and should not be greater than the
value of sit.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.3 |
sitThe sit.
unit: second.
transmit always(0), the value of sit(2~120).
The value is 2 times of the real value and should not be less than
groupCallHangTime, privateCallHangTime and emergencyCallHangTime.rw INTEGER (0|2..120) .1.3.6.1.4.1.40297.1.2.5.5.4 |
txPreambleDurationThe preamble duration.
unit: milisecond.
The value is 1/60 times of the real value.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.5 |
beaconTxModeThe beacon transmit mode.
local(0), network(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.6 |
beaconDurationThe beacon duration.
unit: milisecond.
disable(0), beacon duration(4~150).
The value is 1/120 times of the real valuerw INTEGER (0|4..150) .1.3.6.1.4.1.40297.1.2.5.5.7 |
beaconIntervalThe beacon interval.
unit: second.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.8 |
multisiteAccessManagementThe multisite access management control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.9 |
accessManagementThe access management control.
disable(0), enable(1).rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.10 |
multisiteAccessManageTableThe table of multisite access management's parameters relevant to the
multisite access management. SEQUENCE OF MultisiteAccessManageEntry .1.3.6.1.4.1.40297.1.2.5.5.11 |
multisiteAccessManageEntryThe multisite management parameters. MultisiteAccessManageEntry .1.3.6.1.4.1.40297.1.2.5.5.11.1 |
multisiteAccessManageIndexThe index of the table which uniquely identifies the multisite access
management's parameters.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.5.11.1.1 |
multisiteStartIdThe start ID.
invalid record(0), start ID(1~16776415).
It can't be set until multisiteAccessManagement is enable and the previous
row is set. If it is set, the matched multisiteIdLength and
multisiteAccessCallType will be set to 100 and 1 automaticly.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.11.1.2 |
multisiteIdLengthThe ID length.
invalid(65535), ID length(1~255).
It can't be set until the multisiteAccessManagement is enable and the
matched multisiteStartId is set.rw INTEGER (1..255|65535) .1.3.6.1.4.1.40297.1.2.5.5.11.1.3 |
multisiteAccessCallTypeThe call type.
private call(0), group call(1), invalid(65535).
It can't be set until multisiteAccessManagement is enable.rw INTEGER (0..1|65535) .1.3.6.1.4.1.40297.1.2.5.5.11.1.4 |
contactTableThe table of contacts.
It is not allowed to add a new contact information. SEQUENCE OF ContactEntry .1.3.6.1.4.1.40297.1.2.5.5.12 |
contactEntryThe contact information. ContactEntry .1.3.6.1.4.1.40297.1.2.5.5.12.1 |
contactIndexThe index of the table which uniquely identifies the contact information.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.5.12.1.1 |
callAliasThe call alias.
It is an unicode string.
The value should be exclusive.rw OCTET STRING .1.3.6.1.4.1.40297.1.2.5.5.12.1.2 |
contactCallTypeThe call type.
private call(0), group call(1), all call(2), invalid(65535).
If the contactCallType is all call, the matched callId will be set to
16777215 automatically. The number of all call contact must be less than 2.rw INTEGER (0..2|65535) .1.3.6.1.4.1.40297.1.2.5.5.12.1.3 |
callIdThe call ID.
invalid(0), call ID(1~16776415,16777215).
The callId should be exclusive in the group of same call type.rw INTEGER (0..16776415|16777215) .1.3.6.1.4.1.40297.1.2.5.5.12.1.4 |
accessManageTableThe table of access management's parameters relevant to the access management. SEQUENCE OF AccessManageEntry .1.3.6.1.4.1.40297.1.2.5.5.13 |
accessManageEntryThe access management parameters. AccessManageEntry .1.3.6.1.4.1.40297.1.2.5.5.13.1 |
accessManageIndexThe index of the table which uniquely identifies the access management's
parameters.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.5.13.1.1 |
startIdThe start ID.
invalid record(0), start ID(1~16776415).
It can't be set until accessManagement is enable and the previous
row is set. If it is set, the matched idLength will be set to 100
automaticly.rw INTEGER .1.3.6.1.4.1.40297.1.2.5.5.13.1.2 |
idLengthThe ID length.
invalid(65535), ID length(1~255).
It can't be set until the accessManagement is enable and the
matched startId is set.rw INTEGER (1..255|65535) .1.3.6.1.4.1.40297.1.2.5.5.13.1.3 |
repeatTOTTimeThe repeat TOT time.
unit: second.
The value is 1/5 times of the real value.ro INTEGER (0|3..120) .1.3.6.1.4.1.40297.1.2.5.5.14 |
rerepeatTOTTimeThe rerepeat TOT time.
unit: second.ro INTEGER .1.3.6.1.4.1.40297.1.2.5.5.15 |