HH3C-QINQV2-MIB
Imported Objects
Objects
11 total| Object Name |
|---|
hh3cQinQv2802.1 QinQv2 MIB Version 1 MODULE-IDENTITY .1.3.6.1.4.1.25506.2.137 |
hh3cQinQv2MibObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.137.1 |
hh3cQinQv2ScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.137.1.1 |
hh3cQinQv2ServiceTPIDTPID globally configured for service VLAN tags. The global TPID value for service VLAN tags does not take effect on interfaces where hh3cQinQIfServiceTPID is configured. By default, the global TPID for service VLAN tags is 0x8100.rw Integer32 .1.3.6.1.4.1.25506.2.137.1.1.1 |
hh3cQinQv2CustomerTPIDTPID globally configured for customer VLAN tags. The global TPID value for customer VLAN tags does not take effect on interfaces where hh3cQinQIfCustomerTPID is configured. By default, the global TPID for customer VLAN tags is 0x8100.rw Integer32 .1.3.6.1.4.1.25506.2.137.1.1.2 |
hh3cQinQv2IfCfgTable802.1 QinQ configuration table. SEQUENCE OF Hh3cQinQv2IfCfgEntry .1.3.6.1.4.1.25506.2.137.1.2 |
hh3cQinQv2IfCfgEntry802.1 QinQ configuration entries. Hh3cQinQv2IfCfgEntry .1.3.6.1.4.1.25506.2.137.1.2.1 |
hh3cQinQv2IfState802.1 QinQ functions on the port. The value is false by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.137.1.2.1.1 |
hh3cQinQv2IfServiceTPIDService TPID value on the port.rw Integer32 .1.3.6.1.4.1.25506.2.137.1.2.1.2 |
hh3cQinQv2IfCustomerTPIDCustomer TPID value on the port.rw Integer32 .1.3.6.1.4.1.25506.2.137.1.2.1.3 |
hh3cQinQv2IfTransVlanListTransparent VLANs described as a bitmap. Each octet within this value specifies a set of eight VLANs. The first octet specifies VLANs 1 through 8. The second octet specifies VLANs 9 through 16, and so on. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.rw OCTET STRING .1.3.6.1.4.1.25506.2.137.1.2.1.4 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →SNMP MIB module
SNMP MIB module
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
SNMP MIB module