HH3C-MPLS-BGP-VPN-MIB
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, August 1999.
Main OID:
hh3cMplsVpn.1.3.6.1.4.1.25506.8.12.3
49
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
hh3cMplsVpnThis MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, August 1999. MODULE-IDENTITY .1.3.6.1.4.1.25506.8.12.3 |
hh3cmplsVpnObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.12.3.1 |
hh3cmplsVpnScalars OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.12.3.1.1 |
hh3cmplsVpnConfiguredVrfsThe number of VRFs which are configured on this node.ro Unsigned32 .1.3.6.1.4.1.25506.8.12.3.1.1.1 |
hh3cmplsVpnActiveVrfsThe number of VRFs which are active on this node. That is, those whose operStatus = Up (1).ro Unsigned32 .1.3.6.1.4.1.25506.8.12.3.1.1.2 |
hh3cmplsVpnConf OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.12.3.1.2 |
hh3cmplsVpnInterfaceConfTableThis table specifies per-interface MPLS capability and associated information. SEQUENCE OF Hh3cMplsVpnInterfaceConfEntry .1.3.6.1.4.1.25506.8.12.3.1.2.1 |
hh3cmplsVpnInterfaceConfEntryAn entry in this table is created by an LSR for every interface capable of supporting MPLS/BGP VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table. Hh3cMplsVpnInterfaceConfEntry .1.3.6.1.4.1.25506.8.12.3.1.2.1.1 |
hh3cmplsVpnInterfaceConfIndexThis is a unique index for an entry in the hh3cmplsVpnInterfaceConfTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.8.12.3.1.2.1.1.1 |
hh3cmplsVpnInterfaceLabelEdgeTypeEither the providerEdge(1) (PE) or customerEdge(2) (CE) bit MUST be set.ro Enumeration .1.3.6.1.4.1.25506.8.12.3.1.2.1.1.2 |
hh3cmplsVpnInterfaceVpnClassificationDenotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario.ro Enumeration .1.3.6.1.4.1.25506.8.12.3.1.2.1.1.3 |
hh3cmplsVpnInterfaceIpAddressThe IP address of this interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.2.1.1.4 |
hh3cmplsVpnInterfaceIpAddressMaskThe IP address mask of this interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.2.1.1.5 |
hh3cmplsVpnInterfaceConfRowStatusThe row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation suceeds, the interface will have been associated, otherwise the agent would not allow the association. If the agent only allows read-only operations on this table, it will create entries in this table as they are created.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.1.1.6 |
hh3cmplsVpnVrfConfTableThis table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN. SEQUENCE OF Hh3cMplsVpnVrfConfEntry .1.3.6.1.4.1.25506.8.12.3.1.2.2 |
hh3cmplsVpnVrfConfEntryAn entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. Hh3cMplsVpnVrfConfEntry .1.3.6.1.4.1.25506.8.12.3.1.2.2.1 |
hh3cmplsVpnVrfNameThe human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID.ro Hh3cMplsVpnId .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.1 |
hh3cmplsVpnVrfRouteDistinguisherThe route distinguisher for this VRF.rw Hh3cMplsVpnRouteDistinguisher .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.2 |
hh3cmplsVpnVrfNetPrefixTypeDenotes the type network prefix in use for the PE-CE connections.ro Enumeration .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.3 |
hh3cmplsVpnVrfNetPrefixDenotes the network prefix for the PE-CE connections.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.4 |
hh3cmplsVpnVrfIpRouteRedistributeConnDenotes the redistribution of directly connected networks into the VRF BGP table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.5 |
hh3cmplsVpnVrfIpRouteRedistributeStaticDenotes the redistribution of static routes into the VRF BGP table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.6 |
hh3cmplsVpnVrfIpRouteRedistributeRipDenotes the redistribution of rip routes into the VRF BGP table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.7 |
hh3cmplsVpnVrfConfHighRouteThresholdDenotes high-level water marker for the number of routes which this VRF may hold.rw Unsigned32 .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.8 |
hh3cmplsVpnVrfConfIsWarnOnlyDenotes the action when the amount of VPN's routes exceed the hh3cmplsVpnVrfConfHighRouteThreshold.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.9 |
hh3cmplsVpnVrfConfMaxRoutesDenotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to hh3cmplsVrfMaxPossibleRoutes unless it is set to 0.rw Unsigned32 .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.10 |
hh3cmplsVpnVrfConfRowStatusThis variable is used to create, modify, and/or delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.2.1.11 |
hh3cmplsVpnVrfRouteTargetTableThis table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN. SEQUENCE OF Hh3cMplsVpnVrfRouteTargetEntry .1.3.6.1.4.1.25506.8.12.3.1.2.3 |
hh3cmplsVpnVrfRouteTargetEntryAn entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS/BGP VPN instance. The indexing provides an ordering per-VRF instance. Hh3cMplsVpnVrfRouteTargetEntry .1.3.6.1.4.1.25506.8.12.3.1.2.3.1 |
hh3cmplsVpnVrfRouteTargetThe route target distribution policy.ro Hh3cMplsVpnRouteDistinguisher .1.3.6.1.4.1.25506.8.12.3.1.2.3.1.1 |
hh3cmplsVpnVrfRouteTargetTypeThe route target export distribution type.ro Enumeration .1.3.6.1.4.1.25506.8.12.3.1.2.3.1.2 |
hh3cmplsVpnVrfRouteTargetRowStatusRow status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.3.1.3 |
hh3cmplsVpnVrfBgpNbrAddrTableThis table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs. SEQUENCE OF Hh3cMplsVpnVrfBgpNbrAddrEntry .1.3.6.1.4.1.25506.8.12.3.1.2.4 |
hh3cmplsVpnVrfBgpNbrAddrEntryAn entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. Hh3cMplsVpnVrfBgpNbrAddrEntry .1.3.6.1.4.1.25506.8.12.3.1.2.4.1 |
hh3cmplsVpnVrfBgpNbrAddrDenotes the BGP neighbor address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.2.4.1.1 |
hh3cmplsVpnVrfBgpNbrRoleDenotes the role played by this BGP neighbor with respect to this VRF.rw Enumeration .1.3.6.1.4.1.25506.8.12.3.1.2.4.1.2 |
hh3cmplsVpnVrfBgpNbrTypeDenotes the address family of the PE address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.2.4.1.3 |
hh3cmplsVpnVrfBgpNbrAsNumberThe Automonous System that the BGP's neighbour in.rw Unsigned32 .1.3.6.1.4.1.25506.8.12.3.1.2.4.1.4 |
hh3cmplsVpnVrfBgpNbrAdminStatusThe action set by SNMP client.rw Enumeration .1.3.6.1.4.1.25506.8.12.3.1.2.4.1.5 |
hh3cmplsVpnVrfBgpNbrRowStatusThis variable is used to create, modify, and/or delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.2.4.1.6 |
hh3cmplsVpnRoute OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.12.3.1.3 |
hh3cmplsVpnVrfRouteTableThis table specifies per-interface MPLS/BGP VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and IGP routes, as both may appear in the same VRF. SEQUENCE OF Hh3cMplsVpnVrfRouteEntry .1.3.6.1.4.1.25506.8.12.3.1.3.1 |
hh3cmplsVpnVrfRouteEntryAn entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. Hh3cMplsVpnVrfRouteEntry .1.3.6.1.4.1.25506.8.12.3.1.3.1.1 |
hh3cmplsVpnVrfRouteDestThe destination IP address of this route. This object may not take a Multicast (Class D) address value.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.3.1.1.1 |
hh3cmplsVpnVrfRouteMaskIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the hh3cmplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the hh3cmplsVpnVrfRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bit-wise logical-AND of x with the value of the corresponding instance of the hh3cmplsVpnVrfRouteDest object is not equal to hh3cmplsVpnVrfRouteDest.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.3.1.1.2 |
hh3cmplsVpnVrfRouteNextHopOn remote routes, the address of the next system en route; Otherwise, 0.0.0.0. .ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.8.12.3.1.3.1.1.3 |
hh3cmplsVpnVrfRouteIfIndexThe ifIndex value that identifies the local interface through which the next hop of this route should be reached.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.8.12.3.1.3.1.1.4 |
hh3cmplsVpnVrfRouteProtoThe routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.rw Enumeration .1.3.6.1.4.1.25506.8.12.3.1.3.1.1.5 |
hh3cmplsVpnVrfRouteRowStatusRow status for this table. It is used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.12.3.1.3.1.1.6 |