HH3C-LSW-DEV-ADM-MIB
AI MIB Summary
The HH3C-LSW-DEV-ADM-MIB module provides management access to administrative state parameters, configuration settings, and operational status indicators for H3C Layer 3 switches. It enables the monitoring of device-level attributes such as interface states, system uptime, and administrative control flags essential for network device lifecycle management.
The latest baseline.
Main OID:
hh3cLswDeviceAdmin.1.3.6.1.4.1.25506.8.35.18
104
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
hh3cLswDeviceAdminThe latest baseline. MODULE-IDENTITY .1.3.6.1.4.1.25506.8.35.18 |
hh3cLswSystemPara OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.18.1 |
hh3cLswSysIpAddrSystem IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address.ro IpAddress .1.3.6.1.4.1.25506.8.35.18.1.1 |
hh3cLswSysIpMaskMask of the system IP address.ro IpAddress .1.3.6.1.4.1.25506.8.35.18.1.2 |
hh3cLswSysCpuRatioCPU usage of the system in accuracy of 1%, and the range of value is 1 to 100.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.1.3 |
hh3cLswSysVersionInformation of the system version.ro DisplayString .1.3.6.1.4.1.25506.8.35.18.1.4 |
hh3cLswSysTimeSystem time.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.18.1.5 |
hh3cLswSysUNMCastDropEnableEnable or disable discarding of unknown multicast packet.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.1.6 |
hh3cLswSysManagementVlanSystem management VLAN.rw Integer32 .1.3.6.1.4.1.25506.8.35.18.1.7 |
hh3cLswSysVlanRangeSystem VLAN range, if set VLAN range, must bind mangement IP/Mask.rw DisplayString .1.3.6.1.4.1.25506.8.35.18.1.8 |
hh3cLswSysManagementIpAddrSystem IP address.rw IpAddress .1.3.6.1.4.1.25506.8.35.18.1.9 |
hh3cLswSysManagementIpMaskMask of the system IP address.rw IpAddress .1.3.6.1.4.1.25506.8.35.18.1.10 |
hh3cMacAddressCountPortSupportted MAC address number on port.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.1.11 |
hh3cMacAddressCountMachineSupportted MAC address number on machine.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.1.12 |
hh3cLswSysPhyMemoryThe memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.1.13 |
hh3cLswSysMemoryThe memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.1.14 |
hh3cLswSysMemoryUsedThe system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.1.15 |
hh3cLswSysMemoryRatioThe percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hh3cLswSysMemoryUsed hh3cLswSysMemoryRatio = -------------------- hh3cLswSysMemory For the distributed device, it represents the memory used ratio on the master slot.ro Unsigned32 .1.3.6.1.4.1.25506.8.35.18.1.16 |
hh3cLswSysTemperatureThe temperature of system. For the distributed device, it represents the temperature on the master slot.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.1.17 |
hh3cLswSysPhyMemRevSize of the memory space for the software platform. This node is used to replace hh3cLswSysPhyMemory. For a distributed device, it indicates the size of the memory space on the active MPU.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.25506.8.35.18.1.18 |
hh3cLswSysMemRevSize of the physical memory space. This node is used to replace hh3cLswSysMemory. For a distributed device, it indicates the size of the memory space on the active MPU.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.25506.8.35.18.1.19 |
hh3cLswSysMemUsedRevSize of the memory space used by the software system. This node is used to replace hh3cLswSysMemoryUsed. For a distributed device, it indicates the size of the memory space on the active MPUro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.25506.8.35.18.1.20 |
hh3cLswSlotConf OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.18.4 |
hh3cLswFrameTableFrame information table. SEQUENCE OF Hh3cLswFrameEntry .1.3.6.1.4.1.25506.8.35.18.4.2 |
hh3cLswFrameEntryFrame description table entry. Hh3cLswFrameEntry .1.3.6.1.4.1.25506.8.35.18.4.2.1 |
hh3cLswFrameIndexThe unique index of frame.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.2.1.1 |
hh3cLswFrameTypeFrame type.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.2.1.2 |
hh3cLswFrameDescFrame description.rw DisplayString .1.3.6.1.4.1.25506.8.35.18.4.2.1.3 |
hh3cLswSlotNumberNumber of slots of the current frame.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.2.1.4 |
hh3cLswFrameAdminStatusThe Status of frame.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.2.1.5 |
hh3cLswSlotTableSlot description table. SEQUENCE OF Hh3cLswSlotEntry .1.3.6.1.4.1.25506.8.35.18.4.3 |
hh3cLswSlotEntrySlot description table entry. Hh3cLswSlotEntry .1.3.6.1.4.1.25506.8.35.18.4.3.1 |
hh3cLswSlotIndexSlot index. When the slot is empty, listed as vacant slot.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.1 |
hh3cLswSlotTypeSlot type. BOM number is recommended.ro Hh3cLswTypeOfSlot .1.3.6.1.4.1.25506.8.35.18.4.3.1.2 |
hh3cLswSlotDescSlot description.rw DisplayString .1.3.6.1.4.1.25506.8.35.18.4.3.1.3 |
hh3cLswSlotCpuRatioCPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.4 |
hh3cLswSlotPcbVersionHardware version of the board.ro DisplayString .1.3.6.1.4.1.25506.8.35.18.4.3.1.5 |
hh3cLswSlotSoftwareVersionSoftware version of the board.ro DisplayString .1.3.6.1.4.1.25506.8.35.18.4.3.1.6 |
hh3cLswSubslotNumberNumber of the cards of the board.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.7 |
hh3cLswSlotAdminStatusSlot status.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.3.1.8 |
hh3cLswSlotOperStatusSlot operation status.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.4.3.1.9 |
hh3cLswSlotPhyMemoryThe memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.4.3.1.10 |
hh3cLswSlotMemoryThe memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.4.3.1.11 |
hh3cLswSlotMemoryUsedThe system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.4.3.1.12 |
hh3cLswSlotMemoryRatioThe percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform.ro Unsigned32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.13 |
hh3cLswSlotTemperatureThe temperature of system on the board.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.14 |
hh3cLswSlotPktBufFreeThe number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.15 |
hh3cLswSlotPktBufInitThe number of packet buffers allocated when the switch booted.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.16 |
hh3cLswSlotPktBufMinThe smallest number of packet buffers available since the switch booted.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.3.1.17 |
hh3cLswSlotPktBufMissThe number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.ro Counter64 .1.3.6.1.4.1.25506.8.35.18.4.3.1.18 |
hh3cLswSlotRunTimeRuntime of board. For example, if a board has run for 2 days 4 hours and 20 minutes, its runtime is displayed as 0 weeks, 2 days, 4 hours, 20 minutes.ro DisplayString .1.3.6.1.4.1.25506.8.35.18.4.3.1.19 |
hh3cLswSlotPhyMemRevSize of the memory on the board. This node is used to replace hh3cLswSlotPhyMemory.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.25506.8.35.18.4.3.1.20 |
hh3cLswSlotMemRevSize of the memory space for the software system on the board. This node is used to replace hh3cLswSlotMemory. Note that the system memory means the memory can be used by the software platform.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.25506.8.35.18.4.3.1.21 |
hh3cLswSlotMemUsedRevSize of the memory space used by the software system on the board. This node is used to replace hh3cLswSlotMemoryUsed. Note that the system memory means the memory can be used by the software platform.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.25506.8.35.18.4.3.1.22 |
hh3cLswSlotModelDescModel of the extended device in a slot. Examples of extended devices include PEXs and firewall modules. If the device in the slot is not an extended device, a zero-length string is returned.ro DisplayString .1.3.6.1.4.1.25506.8.35.18.4.3.1.23 |
hh3cLswSubslotTableSubslot description table. SEQUENCE OF Hh3cLswSubslotEntry .1.3.6.1.4.1.25506.8.35.18.4.4 |
hh3cLswSubslotEntrySubslot description table entry. Hh3cLswSubslotEntry .1.3.6.1.4.1.25506.8.35.18.4.4.1 |
hh3cLswSubslotIndexSubslot index.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.4.1.1 |
hh3cLswSubslotTypeType of the pinch board in the subslot.ro Hh3cLswTypeOfSlot .1.3.6.1.4.1.25506.8.35.18.4.4.1.2 |
hh3cLswSubslotPortNumNumber of physical ports in the pinch board.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.4.1.3 |
hh3cLswSubslotAdminStatusStatus of the pinch board in the subslot.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.4.1.4 |
hh3cLswSubslotFirstIfIndexThe value of ifIndex of the first physical port in the pinch board.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.4.1.5 |
hh3cLswPortTablePort configuration table. SEQUENCE OF Hh3cLswPortEntry .1.3.6.1.4.1.25506.8.35.18.4.5 |
hh3cLswPortEntryPort configuration table entry. Hh3cLswPortEntry .1.3.6.1.4.1.25506.8.35.18.4.5.1 |
hh3cLswPortIndexThe port number on the device. The first port number is 1, which is reserved if the port does not exist.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.5.1.1 |
hh3cLswPortTypeNormally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.5.1.2 |
hh3cLswPortIfindexThe value of ifIndex of the port.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.5.1.3 |
hh3cLswPortIsPluggedPort is plugged or not.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.5.1.4 |
hh3cLswPortLoopbackTablePort loopback test table. SEQUENCE OF Hh3cLswPortLoopbackEntry .1.3.6.1.4.1.25506.8.35.18.4.6 |
hh3cLswPortLoopbackEntryPort loopback test table entry. Hh3cLswPortLoopbackEntry .1.3.6.1.4.1.25506.8.35.18.4.6.1 |
hh3cLswPortLoopbackIsSupportThe loopback type can be supported by current port.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.1 |
hh3cLswPortLoopbackOperatePort loopback operate type. Read operation not supported.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.2 |
hh3cLswPortLoopbackResultLoopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.3 |
hh3cLswPortLoopbackAutoStopSupportWhether this port support NEED-MANNUL-NOLOOP mode or not.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.4 |
hh3cLswPortLoopbackRemoteResultThe remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.5 |
hh3cLswPortLoopbackLocalResultThe local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.6 |
hh3cLswPortLoopbackInternalResultThe internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.7 |
hh3cLswPortLoopbackExternalResultThe external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.4.6.1.8 |
hh3cLswFabricTableThis table contains the information of fabric. SEQUENCE OF Hh3cLswFabricEntry .1.3.6.1.4.1.25506.8.35.18.4.7 |
hh3cLswFabricEntryAn entry in hh3cLswFabricTable. Hh3cLswFabricEntry .1.3.6.1.4.1.25506.8.35.18.4.7.1 |
hh3cLswFabricChannelIndexThe channel number of fabric. Integer32 .1.3.6.1.4.1.25506.8.35.18.4.7.1.1 |
hh3cLswFabricUtilInIngress utilization of fabric.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.7.1.2 |
hh3cLswFabricUtilOutEgress utilization of fabric.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.7.1.3 |
hh3cLswFabricPeakInIngress peak of utilization for fabric.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.7.1.4 |
hh3cLswFabricPeakInTimeIngress peak time of utilization for fabric.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.18.4.7.1.5 |
hh3cLswFabricPeakOutEgress peak of utilization for fabric.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.7.1.6 |
hh3cLswFabricPeakOutTimeEgress peak time of utilization for fabric.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.18.4.7.1.7 |
hh3cLswNetworkHealthMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.18.4.8 |
hh3cLswExtendModelTableThis table contains the extended device models supported by the device. Examples of extended devices include PEXs and firewall modules. SEQUENCE OF Hh3cLswExtendModelEntry .1.3.6.1.4.1.25506.8.35.18.4.9 |
hh3cLswExtendModelEntryThis entry contains information about an extended device model. Hh3cLswExtendModelEntry .1.3.6.1.4.1.25506.8.35.18.4.9.1 |
hh3cLswExtendModelIndexIndex of the extended device model. Integer32 .1.3.6.1.4.1.25506.8.35.18.4.9.1.1 |
hh3cLswExtendModelDescExtended device model. Examples of extended devices include PEXs and firewall modules.ro DisplayString .1.3.6.1.4.1.25506.8.35.18.4.9.1.2 |
hh3cLswCpuTableCpu description table. SEQUENCE OF Hh3cLswCpuEntry .1.3.6.1.4.1.25506.8.35.18.4.10 |
hh3cLswCpuEntryCPU description table entry. Hh3cLswCpuEntry .1.3.6.1.4.1.25506.8.35.18.4.10.1 |
hh3cLswCpuIndexCPU index. Integer32 .1.3.6.1.4.1.25506.8.35.18.4.10.1.1 |
hh3cLswCpuEntityIndexThe entity index of the CPU.ro Integer32 .1.3.6.1.4.1.25506.8.35.18.4.10.1.2 |
hh3cLswCpuRatioCPU usage in accuracy of 1%ro Unsigned32 .1.3.6.1.4.1.25506.8.35.18.4.10.1.3 |
hh3cLswCpuSoftwareVersionSoftware version of the CPU.ro DisplayString .1.3.6.1.4.1.25506.8.35.18.4.10.1.4 |
hh3cLswCpuAdminStatusCPU status.ro Enumeration .1.3.6.1.4.1.25506.8.35.18.4.10.1.5 |
hh3cLswCpuOperStatusCPU operation status.rw Enumeration .1.3.6.1.4.1.25506.8.35.18.4.10.1.6 |
hh3cLswCpuPhyMemoryThe physical memory on the node.ro CounterBasedGauge64 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.4.10.1.7 |
hh3cLswCpuMemoryThe system memory on the node. Note that the system memory means the memory that can be used by the software platform.ro CounterBasedGauge64 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.4.10.1.8 |
hh3cLswCpuMemoryUsedThe system memory in use on the node. Note that the system memory means the memory that can be used by the software platform.ro CounterBasedGauge64 UNITS "byte" .1.3.6.1.4.1.25506.8.35.18.4.10.1.9 |
hh3cLswCpuMemoryRatioThe percentage of system memory in use on the node. Note that the system memory means the memory that can be used by the software platform.ro Unsigned32 .1.3.6.1.4.1.25506.8.35.18.4.10.1.10 |