HH3C-LLDP-EXT-MIB
Imported Objects
Objects
9 total| Object Name |
|---|
hh3clldpLLDP extended management infomation. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.100 |
hh3clldpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.100.1 |
hh3clldpConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.100.1.1 |
hh3clldpAdminStatusThe global administratively desired status of the local LLDP agent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.100.1.1.1 |
hh3clldpComplianceCDPStatusThe global administratively desired status of CDP Compliance.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.100.1.1.2 |
hh3clldpPortConfigTableThe port-based table that controls extended functions. SEQUENCE OF Hh3clldpPortConfigEntry .1.3.6.1.4.1.25506.2.100.1.1.3 |
hh3clldpPortConfigEntryLLDP extended configuration information for a particular port. This co-
nfiguration parameter controls compliance with other non-standard link
layer discovery protocol such as CDP. Hh3clldpPortConfigEntry .1.3.6.1.4.1.25506.2.100.1.1.3.1 |
hh3clldpPortConfigPortNumThe index value used to identify the port component associated with th-
is entry. LldpPortNumber (LLDP-MIB) .1.3.6.1.4.1.25506.2.100.1.1.3.1.1 |
hh3clldpPortConfigCDPComplianceStatusThe administratively desired CDP Compliance status of the local LLDP a-
gent. If the associated hh3clldpPortConfigCDPComplianceStatus object has
a value of 'txAndRx', then the LLDP agent will receive CDP frames on th-
is port, and will transmit CDP frames only after receive a CDP frames.
If the associated lldpPortConfigAdminStatus object has a value of 'disa-
bled', LLDP agent will not transmit or receive CDP frames on this port.rw Enumeration .1.3.6.1.4.1.25506.2.100.1.1.3.1.2 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →SNMP MIB module
SNMP MIB module
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
SNMP MIB module