HARMONIC-INC-NSG9000-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HARMONIC-INC-NSG9000-MIB.
50
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
harmonicInc OBJECT IDENTIFIER .1.3.6.1.4.1.1563 |
IMPORTS Unknown .1.3.6.1.4.1.1563 |
hOids OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1 |
hModuleOids OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1 |
hSystemOid OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1.1 |
hPlatformOid OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1.2 |
hGbePortOid OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1.3 |
hSlotOid OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1.4 |
hRfModuleOid OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1.5 |
hRfPortOid OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1.6 |
hQamChannelOid OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.1.7 |
hTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1563.1.2 |
hPlatformTempFailTrapTemp Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.1 |
hPlatformVoltageFailTrapVoltage Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.2 |
hPlatformFan1FailTrapFan 1 Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.3 |
hPlatformFan2FailTrapFan 2 Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.4 |
hPlatformFan3FailTrapFan 3 Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.5 |
hPlatformFan4FailTrapFan 4 Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.6 |
hPlatformPS1VoltageFailTrapPower supply 1 Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.7 |
hPlatformPS2VoltageFailTrapPower supply 2 Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.8 |
hPlatformR6ConnLossTrapR6 connection lost TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.9 |
hPlatformD6ConnLossTrapD6 connection lost TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.10 |
hGbePortLinkDownTrapGbe port link down TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.11 |
hRfModuleHwFailTrapRf module hw failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.12 |
hRfModuleTempFailTrapRf module temperature failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.13 |
hRfPortHwFailTrapRf port hw failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.14 |
hRfPortTempFailTrapRf port temperature failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.15 |
hQamChanneOverflowTrapQam channel overflow TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.16 |
hServicePatMissingService pat missing TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.17 |
hServicePmtMissingService pmt missing TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.18 |
hSwitchToAlternateSourceSDV service switch to alternate source TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.19 |
hPassThroughSourceFailureSource Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.20 |
hPidRemuxSourceFailureSource Failure TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.21 |
hDtiCardMissingDTI Card Missing TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.22 |
hMcECMMissingECM Missing TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.23 |
hMcECMNearingExpirationECM Nearing Expiration TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.24 |
hMcECMExpiredECM Expired TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.25 |
hDtiClientLinkDownDTI Client Link Down TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.26 |
hDtiClientNotLockedDTI Client Not Locked TRAP-TYPE .1.3.6.1.4.1.1563.1.2.0.27 |
hObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1563.2 |
hSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1563.2.1 |
hTrapTimeLastGeneratedThe value of sysUpTime at the time the last trap was
generated.
This object can be used by the management station to determine
whether traps were generated since the last poll.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1563.2.1.3 |
hTrapForwardTableThis table contains one row per event (trap) forwarding
discriminator. SEQUENCE OF HTrapForwardEntry .1.3.6.1.4.1.1563.2.1.4 |
hTrapForwardEntryAn entry in the Trap Forwarding Table
contains information about a particular event forwarding
discrminator (EFD). Each EFD specifies exactly one
destination. Its discriminator construct always evaluates
to TRUE value, i.e. all event reports pass a particualar EFD.
This is the reason why discriminator construct are omitted. HTrapForwardEntry .1.3.6.1.4.1.1563.2.1.4.1 |
hTrapDestAddrThe IP address of the network management entity to which traps
(of the type specified in this table entry) should be sent. The
value of this object uniquely identifies the trap destination.ro IpAddress .1.3.6.1.4.1.1563.2.1.4.1.1 |
hTrapDestAddrStatusThe status of the table entry denotes both action and current
states.
Set-requests can carry the action values createAndGo(4) and
destroy(6).
Get-request always yields the current value active(1).
In order for a management application to create an entry the
Set-request with hlpTrapDestAddrStatus(createAndGo) variable
binding must be sent to the agent. The instance ID part of the
status variable will indicate the desired ip-address.
In order for a management application to delete an entry the
Set-request with hlpTrapDestAddrStatus(destroy) variable
binding must be sent to the agent.
Upon creation, the entry moves into active(1) state and stays
in this state until deletion.rw Enumeration .1.3.6.1.4.1.1563.2.1.4.1.2 |
hTrapFields OBJECT IDENTIFIER .1.3.6.1.4.1.1563.3 |
hAlarmStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1563.3.1 |
hAlarmSeverity OBJECT IDENTIFIER .1.3.6.1.4.1.1563.3.2 |
hAlarmDesc OBJECT IDENTIFIER .1.3.6.1.4.1.1563.3.3 |