Home/Catalog/GW-EPON-MIB

GW-EPON-MIB

EPON private MIB information definitions
Main OID:
gwEponMib.1.3.6.1.4.1.37950.1.1.20
333
Objects
Active
Status
3
Dependencies

Imported Objects

GWTT-SMI
SNMPv2-TC
SNMPv2-SMI

Objects

333 total
Object Name
gwEponMibEPON private MIB information definitions
MODULE-IDENTITY
.1.3.6.1.4.1.37950.1.1.20
gwEponMibObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1
gwEponCfgGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1
gwEponDevice
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.1
gwEponDevTableTable of device informations
SEQUENCE OF GwEponDevEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1
gwEponDevEntryAn entry in the table, containing properties and some descriptions
GwEponDevEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1
deviceIndexIndex of devicero
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.1
deviceTypeThe value indicates the type of this devicero
EponDeviceType
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.2
deviceNameA string indicates or configure device namerw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.3
deviceDescriptionDescription for this devicerw
DisplayString ( SIZE ( 0 .. 255 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.4
deviceLocationA string indicates and configure the device locationrw
DisplayString ( SIZE ( 0 .. 255 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.5
deviceVendorA string indicates the vendorro
DisplayString ( SIZE ( 0 .. 255 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.6
deviceFirmWareVersionThe value indicates the version of firmwarero
DisplayString ( SIZE ( 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.7
deviceSoftWareVersionThe value indicates the version of softwarero
DisplayString ( SIZE ( 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.8
deviceHardWareVersionThe value indicates the version of PCBro
DisplayString ( SIZE ( 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.9
deviceOperStatusThe current operational state of the device, 'down(2)' indicates that the ONU is off-line. 'dormant(4)' indicates the device is waiting for external actions (such as no bandwidth for any service), 'powerDown(5)' indicates the device is power down or dying gasp.ro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.10
deviceAlarmStatusThe value indicates alarm status for this device, it means unique alarm occur that unique bit is set '1', on the other hand, unique bit is set 0 while this alarm is cleared.ro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.11
deviceMacAddressThe value indicates and confgure device MAC addressrw
MacAddress ( SIZE ( 6 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.12
deviceLastChangethe last time for this device changero
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.15
deviceResetDescriptionrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.16
deviceEntLogicalIndexThe value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous.ro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.17
deviceEntLogicalCommunityAn SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support).ro
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.18
deviceOnuTestDistancethe distance between OLT and unique ONU, unit:meterro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.19
deviceUpTimeThe value of this object uniquely identifies up time about this device.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.20
deviceStpEnableOLT or ONU spanning tree contral, enable(1)- enable the spanning tree protocol, disable(2)- disable the spanning tree protocol.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.21
deviceChipsetVendorPON chipset vendor IDro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.22
deviceChipsetModePON chipset typero
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.23
deviceChipsetRevisionPON chipset revisionro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.24
deviceChipsetDatePON chipset design datero
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.25
deviceCapPortDescPort capabilities description, include GE/FE/E1/POTS etc.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.26
deviceCapEthPortNumNumber of ethernet port supportedro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.27
deviceCapIadPotsPortNumNumber of POTS port of IAD supportedro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.28
deviceCapE1PortNumNumber of E1 port supportedro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.29
deviceCapUQueueTotalNumber of upstream queuesro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.30
deviceCapUQueuePortMaximum queues per port upstreamro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.31
deviceCapDQueueTotalNumber of downstream queuesro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.32
deviceCapDQueuePortMaximum queues per port downstreamro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.33
deviceCapBatteryBattery Backupro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.34
deviceMulticastSwitchONU multicast switchrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.35
deviceSystemTimeCurrent system clock-time. OCTET-STRING consisting of eleven octets whose contents are defined by RFC2579.rw
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.36
deviceRestartupTimeThe time of device(OLT or ONU) restartup-time. OCTET-STRING consisting of eleven octets whose contents are defined by RFC2579.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.37
deviceTrafficServiceStatusONU traffic service state. 'enable(1)' indicates the traffic is in-service. 'disable(2)' indicates the traffic is out of service, but is still registered.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.38
deviceAlarmMask.rw
Bits
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.39
deviceModel.ro
DisplayString ( SIZE ( 1 .. 32 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.40
deviceMulticastFastLeaveAbilityFast Leave Mode: If the bit value of 'ctc(0)' is 0, the mode is CTC and non-fast-leave function, if the bit value of 'ctc(0)' is 1, the mode is CTC and fast-leave function; If the bit value of 'snooping(1)' is 0, the mode is snooping and non-fast-leave function, If the bit value of 'snooping(1)' is 1, the mode is snooping and fast-leave function.ro
Bits
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.41
deviceMulticastFastLeaveOperStateFast Leave Function is active or deactivero
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.42
deviceMulticastFastLeaveAdminStateactive or deactivate Fast Leave Functionrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.43
onuMacTableAlarmThresholdonu MAC table alarm thresholdrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.44
onuMacNumbersshow onu actual mac numberro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.1.1.1.45
gwEponBoard
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.2
gwEponBoardTabletable of board informations
SEQUENCE OF GwEponBoardEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1
gwEponBoardEntryAn entry in the table, containig status and configrue information about boards
GwEponBoardEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1
boardIndexindex of boards in unique device which is specified by 'deviceIndex'ro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.1
curBoardTypeThe value indicates the type of this board.ro
ChassisSlotBoardType
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.2
boardDescriptionThe value indicates and confgure board descriptionrw
DisplayString ( SIZE ( 0 .. 255 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.3
boardActModeThe value indicates acting mode of unique boardro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.4
boardOperStatusThe Value indicates board operating statusro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.5
boardAlarmLevelThe value indicates alarm level for unique boardro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.6
boardLastChangeTimethe time of last change about this boardro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.7
boardSupprotTypeThe value indicates the type of board this slot surpports.ro
ChassisSlotSupportType
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.8
boardResetThe value of this object determines whether reset this board. 'noop(1)' - only read value. 'reset(2)' - only write value, if the active master board is resetted, and another master board is running, then, the two boards will be switchover.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.9
boardTemperatureThe value indicates the temperature of this boardro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.10
boardEntLogicalIndexThe value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous.ro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.11
boardEntLogicalCommunityAn SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support).ro
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.12
boardSoftwareVersionthe value indicates the version of softwarero
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.13
boardFirmwareVersionthe value indicates the version of firmwarero
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.14
boardBootVersionBoot Versionro
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.15
boardHardwareVersionHardware Versionro
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.16
boardManufactureDateManufacture Datero
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.17
boardSerialNoManufacture Serial Noro
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.18
boardCpuUsageThe percentage of CPU usagero
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.19
boardMemoryUsageThe percentage of used memoryro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.20
boardHasSnmpAgentthe object indicates whether there is a SNMP agent running on this board.ro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.21
boardSnmpAgentIpAddrthis object indicates and configure IP address of SNMP agent running on this board. now, only GT861's IAD boards surpport this function.rw
IpAddress
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.22
boardSnmpAgentReadCommunitythe object indicates and configure the read-only community of SNMP agent running on the board. now, only GT861's IAD boards surpport this function.rw
DisplayString ( SIZE ( 0 .. 16 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.23
boardSnmpAgentWriteCommunitythe object indicates and configure the read-write community of SNMP agent running on the board. now, only GT861's IAD boards surpport this function.rw
DisplayString ( SIZE ( 0 .. 16 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.24
boardTemperatureHighThresholdsrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.25
boardCpuUsageThresholdsrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.26
boardMemoryUsageThresholdsThe percentage of used memoryrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.27
boardMemorySizero
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.28
boardTemperatureLowThresholdsrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.29
boardAdminStatusThe desired state of the board.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.2.1.1.30
gwEponPon
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.3
ponPortTabletable of pon port informations
SEQUENCE OF PonPortEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1
ponPortEntryAn entry in the table, containing status and configure information about pon port
PonPortEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1
ponPortIndexindex of pon portro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.1
ponPortIfIndexThe value equipped to the index of this pon port in the IF-MIBro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.2
ponPortDot1dBasePortport id in the bridge, equipped to the value in the bridge 'dot1dBasePort'ro
Integer32 ( 1 .. 65536 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.3
ponPortPartnerDevindex of the device which contains parter pon portro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.4
ponPortPartnerBrdindex of board which contains parter pon portro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.5
ponPortPartnerPortpartnet physical pon port indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.6
ponPortProtectionDevPON Automatic Protection Switching, index of devicerw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.7
ponPortProtectionBrdPON Automatic Protection Switching, index of boardrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.8
ponPortProtectionPortPON Automatic Protection Switching, index of pon portrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.9
ponPortTypetype of pon portro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.10
ponPortMaxOnuThe max number of supported ONUs in this PON port.ro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.11
ponPortCurrOnuThe current number of registered ONUs in this PON port.ro
Integer32 ( 0 .. 64 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.12
ponPortOperStatusoperation status of unique pon portro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.13
ponPortAlarmStatusPON port alarm status, it indicates an alarm with bit=1, if all bit is 0, indicates no alarm.ro
Bits
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.14
ponPortAlarmMaskPON Port Alarm mask, the bit=1 indicates mask.rw
Bits
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.15
ponPortMaxBWThe max bandwidth supported, unit:KB.ro
Integer32 ( 0 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.16
ponPortActBWthe actual bandwidth, unit:KB.ro
Integer32 ( 0 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.17
ponPortRemainBWThe current available bandwidth, unit:KB.ro
Integer32 ( 0 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.18
ponPortApsCtrlPON automatic-protection-switching control.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.19
ponPortApsStatusPON automatic-protection-switching status.ro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.20
ponPortEncryptSetEncryption set according to every ONU, this value is ignored when the pon port belongs to OLT.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.21
ponPortOnuLpbCtrlONU Loopback Control, 'noop(1)' is no operation, i.e. the current status is idle; 'lpbStart(2)' is start loopback, only when the object value is 'noop', it can be configurated 'lpbStart(2)', otherwise forbidden, and if success, its value become 'inProcess(4)'; 'lpbStop(3)' is stop loopback, only when the object value is 'inProcess(4)', it can be configurated 'lpbStop(3)', and if success, its value become 'noop(1)'; 'inProcess(4)' is loopbacking status now.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.22
ponPortOnuLpbSourceLoopback Data Source, 'internal' indicates internal data source, to use testing the link up or down, like ping function; 'external' indicates external data source, to use testing the bandwidth of the ONU ethernet.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.23
ponPortOnuLpbTimeLoopback Timeout, if the object value is 0, indicate the loopback is processing at all time, if the value is none 0, indicate the loopback time from begin to end, when the time is end it will be auto-stopped. unit:second.rw
Integer32 ( 0 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.24
ponPortOnuLpbTxFrmsThe number of frames transmit by this ONU Logical Link.ro
Counter32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.25
ponPortOnuLpbRxFrmsThe number of frames transmit by this ONU Logical Link.ro
Counter32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.26
ponEntLogicalIndexThe value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous.ro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.27
ponEntLogicalCommunityAn SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support).ro
DisplayString ( SIZE ( 1 .. 20 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.28
ponPortLinkedOnuCounterThe current number of linked ONUs in this PON port.ro
Integer32 ( 0 .. 64 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.29
ponPortAdminStatusThe desired state of the PON port.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.30
ponPortResetPON interface reset.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.31
ponPortWindowRangeThe max window range of ONU register.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.32
ponPortDownlinkPolicingEblConfig onu downlink-policer enablerw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.33
ponPortAllOnuAlmLevelAll ONUs alarm-level list.ro
OnuAlarmLevelList
.1.3.6.1.4.1.37950.1.1.20.1.1.3.1.1.34
ponOnuMapTabletable of pon-ONU map
SEQUENCE OF PonOnuMapEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.2
ponOnuMapEntryAn entry in the table
PonOnuMapEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.2.1
mappingOnuIndexindex of mapping onuro
Integer32 ( 1 .. 64 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.2.1.1
onuDevIndexdevice index of this ONUro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.2.1.2
onuNamedevice name of this ONUro
DisplayString ( SIZE ( 255 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.2.1.3
ponPerfMonTableTable of pon performence
SEQUENCE OF PonPerfMonEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3
ponPerfMonEntryAn entry in the table, containing pon performence monitor information .
PonPerfMonEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3.1
ponPerfBERbyte error rate of specified pon port upstream, UNIT: 10E-6ro
Counter32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3.1.1
ponPerfFERframe error rate of specified pon port downstream, UNIT: 10E-6ro
Counter32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3.1.4
ponPerfBerAlmEnableThe value indicates whether enable pon performence BER alarmrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3.1.5
ponPerfFerAlmEnableThe value indicates whether enable pon performence FER alarmrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3.1.6
ponPerfUpBandwidththe value indicates upstream bandwidth on this portro
Counter32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3.1.7
ponPerfDownBandwidththe value indicates downstream bandwidth on this portro
Counter32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.3.1.8
ponHisCtrlTableTable of pon performence
SEQUENCE OF PonHisCtrlEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.4
ponHisCtrlEntryAn entry in the table, containing pon performence monitor information .
PonHisCtrlEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.3.4.1
ponHis15MinuteEnableThe value indicates whether enable history statistic with interval 15 minutesrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.4.1.1
ponHis24HourEnableThe value indicates whether enable history statistic with interval 24 hoursrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.3.4.1.2
ponBERThreasholdBer measurement threshold, the value defination: 0=1e-0=1, 1=1e-1=0.1,......rw
Integer32 ( 0 .. 8 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.5
ponFERThreasholdFer measurement threshold, the value defination: 0=1.00e-0=1, 1=1.00e-1=0.1,......rw
Integer32 ( 0 .. 10 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.6
gwEponPonCtcExt
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.3.7
gwEponPonCtcExtOamDiscoveryTimingextended oam discovery timing, unit: msrw
Integer32 ( 0 .. 2550 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.7.1
gwEponPonCtcExtOamCtcOuirw
DisplayString ( SIZE ( 16 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.7.2
gwEponPonCtcExtOamCtcVerCTC ext-oam versionrw
Integer32 ( 1 .. 255 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.7.3
gwEponPonCtcEncrypUpdKeyTimeUpdate key time, unit: srw
Integer32 ( 0 .. 255 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.7.4
gwEponPonCtcEncrypNoReplyTimeoutNo reply timeout, unit: msrw
Integer32 ( 0 .. 2550 )
.1.3.6.1.4.1.37950.1.1.20.1.1.3.7.5
gwEponPonCtcEncrypTimingThresholdEncryption timing thresholdrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.3.7.6
gwEponPonOnuAuth
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.4
onuAuthEnablerwdeprecated
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.4.1
onuAuthTableThe table of ONU authentication based MAC address.
SEQUENCE OF OnuAuthEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.2
onuAuthEntryAn entry in the table
OnuAuthEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.2.1
eponBoardIndexThe epon board indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.2.1.1
eponPonPortIndexPON port indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.2.1.2
onuAuthIndexMAC address indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.2.1.3
onuAuthMacAddressMAC addressrw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.4.2.1.4
onuAuthRowStatusThis object indicates the status of this entry.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.4.2.1.5
onuToPonBindingEnablerw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.4.3
onuAuthModeTableThe table of ONU authentication Mode.
SEQUENCE OF OnuAuthModeEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.4
onuAuthModeEntryAn entry in the table
OnuAuthModeEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.4.1
onuAuthModeBrdIdxro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.4.1.1
onuAuthModePonIdxro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.4.1.2
onuAuthMode'macAddr(1)' : based ONU MAC address. 'loid(2)' : based ONU logical ID. 'hybrid(3)' : based both macAddr and loid. 'loidNoPwd(4) : based loid, but not check password. 'hybridNoPwd(5)' : based hybrid, but not check password.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.4.4.1.3
onuAuthEnableForPonDescriptionrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.4.4.1.4
onuAuthEntryReorganizeFor PonPortrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.4.4.1.5
onuAuthLoidTableThe table of ONU authentication based LOID(Logical ONU ID).
SEQUENCE OF OnuAuthLoidEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5
onuAuthLoidEntryAn entry in the table
OnuAuthLoidEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1
onuAuthLoidBrdIdxro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1.1
onuAuthLoidPonIdxro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1.2
onuAuthLoidIdxro
Integer32 ( 1 .. 128 )
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1.3
onuAuthLoidrw
DisplayString ( SIZE ( 24 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1.4
onuAuthLoidPasswordrw
DisplayString ( SIZE ( 12 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1.5
onuAuthLoidDevIdxrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1.6
onuAuthLoidRowStatusThis object indicates the status of this entry.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.4.5.1.7
onuUnauthenticatedTableThe table of unauthenticated ONUs based MAC address.
SEQUENCE OF OnuAuth1Entry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.6
onuUnauthenticatedEntryAn entry in the table
OnuAuth1Entry
.1.3.6.1.4.1.37950.1.1.20.1.1.4.6.1
eponUnauthenticatedBoardIndexThe epon board indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.6.1.1
eponUnauthenticatedPonPortIndexPON port indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.6.1.2
onuUnauthenticatedIndexMAC address indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.4.6.1.3
onuUnauthenticatedMacAddressMAC addressro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.4.6.1.4
onuAuthEntryReorganizeForAllrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.4.9
gwEponLlid
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.5
ponLlidTableTable of the pon llid information
SEQUENCE OF PonLlidEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1
ponLlidEntryAn entry in the table, containing status or configure information
PonLlidEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1
ponLlidIndexThe pon logic link indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.1
ponLlidTypetype of pon logic linkro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.2
ponLlidOltBoardThe value equals to entPhysicalIndex in ENTITY-MIBrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.3
ponLlidOltPortthe pon port idrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.4
ponLlidOltPortIfIndexifIndex of the olt portrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.5
ponLlidOnuPortIfIndexifIndex of the onu portrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.6
ponLlidOnuBoardThe value indicates board id for this LLIDrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.7
ponLlidOnuPortThe value indicates onu port for this LLIDrw
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.8
ponLlidLLIDthe vlaue of LLIDroobsolete
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.9
ponLlidIfIndexThe value equals to ''ifIndex'' in IF-MIB according this object'ro
Integer32 ( 1 .. 2147483647 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.10
ponLlidUpFixedBWupstream fixed bandwidth about this pon port, unit:KBpsrw
Integer32 ( 0 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.11
ponLlidDownFixedBWupstream fixed bandwidth about this pon port, unit:KBps, not supportrwobsolete
Integer32 ( 0 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.12
ponLlidDescdescription of the LLIDrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.13
ponLlidSurportMacNumThe value of maximum MAC addressesrwdeprecated
Integer32 ( 0 .. 8192 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.14
ponLlidOnuMacAddressThe value indicates and confgure onu MAC addressrw
MacAddress ( SIZE ( 6 ) )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.15
ponLlidRowStatusrow status of this entryrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.16
ponLlidUpBWClassupstream class level for this pon port bandwidth allocationrw
Integer32 ( 0 .. 7 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.17
ponLlidUpDelayupstream delay level for this pon port bandwidth allocationrwdeprecated
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.18
ponLlidUpAssuredBWupstream assured bandwidth about this pon port, unit:KBpsrw
Integer32 ( 64 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.19
ponLlidUpBesteffortBWupstream best-effort bandwidth about this pon port, unit:KBpsrw
Integer32 ( 64 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.20
ponLlidDownBWClassupstream class level for this pon port bandwidth allocationrwobsolete
Integer32 ( 0 .. 7 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.21
ponLlidDownDelayupstream delay level for this pon port bandwidth allocationrwobsolete
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.22
ponLlidDownAssuredBWdownstream assured bandwidth about this pon port, unit:KBpsrw
Integer32 ( 64 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.23
ponLlidDownBesteffortBWdownstream best-effort bandwidth about this pon port, unit:KBpsrwobsolete
Integer32 ( 64 .. 1000000 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.24
ponLlidCtcFecAbilityFEC abilityro
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.25
ponLlidCtcFecModeFEC mode, unknown(1)-initializing, true state not yet known. enable(2)-activate FEC. disable(3)-deactivate FEC.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.26
ponLlidCtcEncrypCtrlCTC encryption controlrw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.27
ponLlidCtcDbaQueSetNumDBA queue set numberrw
Integer32 ( 1 .. 8 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.28
ponLlidCtcDbaQueSetCfgStatusThe Queue sets configuration status, this object value is always 'noop(1)' when read, 'get(2)' will refresh the object of ponLlidCtcDbaQueSetNum and the table of ponLlidCtcDbaQueSetTable, 'set(3)' will config the data, include ponLlidCtcDbaQueSetNum and ponLlidCtcDbaQueSetTable. 'get(2)' and 'set(3) are only write value.rw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.5.1.1.29
ponLlidCtcDbaQueSetTableTable of the pon llid DBA information
SEQUENCE OF PonLlidCtcDbaQueSetEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2
ponLlidCtcDbaQueSetEntryCTC DBA entry
PonLlidCtcDbaQueSetEntry
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1
ponLlidCtcDbaQueSetIndexThe DBA queue-sets indexro
Integer32
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.1
ponLlidCtcDbaReportBitmapbit=0 - queue x report is not present, bit=1 - queue x report is presentrw
Bits
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.2
ponLlidCtcDbaQueue0ThresholdQueue0 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.3
ponLlidCtcDbaQueue1ThresholdQueue1 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.4
ponLlidCtcDbaQueue2ThresholdQueue2 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.5
ponLlidCtcDbaQueue3ThresholdQueue3 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.6
ponLlidCtcDbaQueue4ThresholdQueue4 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.7
ponLlidCtcDbaQueue5ThresholdQueue5 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.8
ponLlidCtcDbaQueue6ThresholdQueue6 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.9
ponLlidCtcDbaQueue7ThresholdQueue7 thresholdrw
Integer32 ( 0 .. 65535 )
.1.3.6.1.4.1.37950.1.1.20.1.1.5.2.1.10
gwDevTrapGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.6
onuNewRegSuccessA new ONU register success.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.1
onuReregSuccessAn ONU reregister success.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.2
onuNotPresentAn ONU is not present alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.3
devPowerOffdevice Power Off Alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.4
devPowerOndevice Power On Alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.5
cfgDataSaveSuccesssaving config data to flash successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.6
cfgDataSaveFailsaving config data to flash unsuccessfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.7
flashClearSuccessclear config data successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.8
flashClearFailclear config data unsuccessfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.9
softwareUpdateSuccessupdate software successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.10
softwareUpdateFailupdate software unsuccessfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.11
firmwareUpdateSuccessfirmware update successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.12
firmwareUpdateFailupdate firmware unsuccessfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.13
cfgDataBackupSuccessbackup configuration data to NMS successfully.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.14
cfgDataBackupFailbackup configuration data to NMS unsuccessfully.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.15
cfgDataRestoreSuccessrestore configuration data from NMS successfully.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.16
cfgDataRestoreFailrestore configuration data from NMS unsuccessfully.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.17
autoProtectSwitchAuto Protect Switch(APS) occurs
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.18
cpuUsageFactorHighhigh cpu usage factor alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.19
ponPortBERAlarmpon port BER alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.20
ponPortBERAlarmClearpon port BER alarm clear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.21
ponPortFERAlarmpon port FER alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.22
ponPortFERAlarmClearpon port FER alarm clear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.23
llidActBWExceedingllid bandwidth exceed the limit
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.24
llidActBWExceedingClearllid bandwidth return to appropriate value
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.25
devBoardIntertedinsert a board
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.26
devBoardPullpull a board out
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.27
powerOffAlarmpower OFF alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.30
powerOnAlarmpower ON alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.31
boardTemperatureHighboard temperature high alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.32
boardTemperatureHighClearboard temperature high alarm clear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.33
ponBoardResetPON board reset event occur
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.34
swBoardProtectedSwitchsw board protected switch event occur
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.35
ponPortAbnormalabnormal status on PON port occur
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.36
onuRegisterConflictonu register conflict
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.37
firmwareLoadSuccessfirmware load successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.38
firmwareLoadFailurefirmware load fail
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.39
dbaUpdateSuccessupdate dba successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.40
dbaUpdateFailureupdate dba faul
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.41
dbaLoadSuccessload dba successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.42
dbaLoadFailureload dba fail
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.43
ponToEthLinkdown.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.44
ponToEthLinkup.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.45
onuSoftwareLoadSuccessload onu software successfully
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.46
onuSoftwareLoadFailureload onu software fail
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.47
ethLinkdownEthernet port linkdown alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.54
ethLinkupEthernet port linkup alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.55
bootUpdateSuccessboot firmware update successfully notification
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.56
bootUpdateFailureboot firmware update fail notification
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.57
batFileBackupSuccessbat file backup successfully notification
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.58
batFileBackupFailurebat file backup fail notification
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.59
batFileRestoreSuccessbat file restore successfully notification
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.60
batFileRestoreFailurebat file restore fail notification
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.61
onuRegAuthFailureIllegal ONU register.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.62
deviceColdStartOnly report OLT cold start. this trap is not sent if a devPowerOn trap is sent for the same restart. Implementation of this trap is optional.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.63
deviceWarmStartOnly report OLT warm start.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.64
deviceExceptionRestartOnly report OLT restart because of exception.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.65
ethLoopAlarmEthernet port loop alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.84
ethLoopAlarmClearEthernet port loop clear.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.85
onuLoopAlarmOnu loop alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.86
onuLoopAlarmClearOnu loop clear.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.87
backboneEthLinkdownEthernet port linkdown alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.88
backboneEthLinkupEthernet port linkup alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.89
boardCpuUsageAlarmcpu usage factor alarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.116
boardCpuUsageAlarmClearcpu usage factor alarm clear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.117
boardMemoryUsageAlarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.118
boardMemoryUsageAlarmClear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.119
ponPortFullAlarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.132
ponPortAbnormalClear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.133
ethPortBroadCastFloodControlEthernet port broadcast flood alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.136
ethPortBroadCastFloodControlClearEthernet port broadcast flood alarm clear.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.137
sysfileUploadsuccess
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.138
sysfileUploadfailure
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.139
sysfileDownloadsuccess
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.140
sysfileDownloadfailure
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.141
ponPortLosAlarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.142
ponPortLosAlarmClear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.143
ponFWVersionMismatch
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.144
ponFWVersionMatch
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.145
ponDBAVersionMismatch
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.146
ponDBAVersionMatch
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.147
ponSFPTypeMismatch
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.148
ponSFPTypeMitch
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.149
ponPortBRASAlarm
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.150
ponPortBRASAlarmClear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.151
ponPortUpNoTraffic
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.152
ponPortUpNoTrafficClear
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.153
onuDeletingNotifyIllegal ONU register.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.154
onuMacTableOverFlowonu mac table over flow.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.208
onuMacTableOverFlowClearonu mac table over flow clear.
NOTIFICATION-TYPE
.1.3.6.1.4.1.37950.1.1.20.1.1.6.209
gwAlarmLevelGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.7
onuNotPresentAlmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.1
devPowerOffAlmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.2
ponPortBERAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.3
ponPortFERAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.4
llidActBWExceedingAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.5
powerOffAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.6
boardTemperatureHighAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.7
devBoardPullAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.8
ethLinkdownAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.9
devFanAlarmAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.10
ethFlrAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.11
ethFerAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.12
ethTransmittalIntermitAlarmLevelthe value indicates an alarm level is set on this eventrw
Integer32 ( 1 .. 4 )
.1.3.6.1.4.1.37950.1.1.20.1.1.7.13
gwConsoleCfgGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.37950.1.1.20.1.1.8
gwConsoleBaudRatethe baud rate for the system consolerw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.8.1
gwConsoleDataBitsthe data bits length for the system consolerw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.8.2
gwConsoleStopBitSetthe stop bits for the system consolerw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.8.3
gwConsoleParitySetthe parity set for the system consolerw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.8.4
gwConsoleFlowCtrlSetthe flow control set for the system consolerw
Enumeration
.1.3.6.1.4.1.37950.1.1.20.1.1.8.5