GDSFrameRelay-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for GDSFrameRelay-MIB.
92
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
92 total| Object Name |
|---|
gds OBJECT IDENTIFIER .1.3.6.1.4.1.1955 |
RFC1213-MIB Unknown .1.3.6.1.4.1.1955 |
seriesfr OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5 |
is-GDS-frame-relay-device5 OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5 |
unit OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.1 |
uVersion-Strings OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.1.1 |
uMain-HW-VersionThe frame relay encryptor mainboard HW version.ro DisplayString .1.3.6.1.4.1.1955.5.5.1.1.1 |
uComm-HW-VersionThe frame relay encryptor commsboard HW version.ro DisplayString .1.3.6.1.4.1.1955.5.5.1.1.2 |
uMain-SW-VersionThe frame relay encryptor mainboard SW version.
Every effort will be made by GDS to make
the MIB backwards compatible to the frame relay
encryptor software. In case of doubt or queries
please quote the following release number.
Enterprise MIB Version Release V1.8pro DisplayString .1.3.6.1.4.1.1955.5.5.1.1.3 |
uComm-SW-VersionThe frame relay encryptor comms board SW version.ro DisplayString .1.3.6.1.4.1.1955.5.5.1.1.4 |
uAlgorithmThe frame relay encryptor encryption algorithm DES or GDS.ro DisplayString .1.3.6.1.4.1.1955.5.5.1.1.5 |
uAccess-TableThe frame relay encryptor access control table version.ro DisplayString .1.3.6.1.4.1.1955.5.5.1.1.6 |
uConfigured OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.1.2 |
uOwn-SIDThe Station Identity of this frame relay encryptor .ro INTEGER .1.3.6.1.4.1.1955.5.5.1.2.1 |
uDynamic OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.1.3 |
uCurrent-DateThe uCurrentTime indicates the current date of
the frame relay encryptor . Date is in the format dd/mm/yy.rw DisplayString .1.3.6.1.4.1.1955.5.5.1.3.1 |
uCurrent-TimeThe uCurrentTime indicates the current time of
the frame relay encryptor . Time is in the format hh:mm.rw DisplayString .1.3.6.1.4.1.1955.5.5.1.3.2 |
uDevice-StateThe current state of the frame relay encryptor . There are two test
states: test-empty with no security parameters loaded
test-loaded which is entered with live parameters from
the live statero Enumeration .1.3.6.1.4.1.1955.5.5.1.3.3 |
uComms-StateThe current state of the frame relay encryptor comms board.ro Enumeration .1.3.6.1.4.1.1955.5.5.1.3.4 |
uNMS-StateThe current state of the SNMP agent for NMS requests.
Only in the writeenabled state are Sets allowed.ro Enumeration .1.3.6.1.4.1.1955.5.5.1.3.5 |
uSM-StateThe current state of the Right SM module. This should be
checked after parameter updates in the configure group
or the MIBII system group.ro Enumeration .1.3.6.1.4.1.1955.5.5.1.3.6 |
uReady-Alarm-LedThe state of the front panel LED
red: GRETACODER is in Test Mode
green: GRETACODER is in Normal Mode
yellow: GRETACODER is performing a self test
blinking-red: GRETACODER is in Failure state
blinking-yellow: GRETACODER MMI user is logged-inro Enumeration .1.3.6.1.4.1.1955.5.5.1.3.7 |
uBackground OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.1.4 |
uRAG-testsThe total number of Random Number Generator tests made
A test is made once per minute.ro Counter .1.3.6.1.4.1.1955.5.5.1.4.1 |
uRAG-failsThe total number of Random Number Generator failures
recordedro Counter .1.3.6.1.4.1.1955.5.5.1.4.2 |
uRAG-thresholdThe number of failures that should trigger a Trap.
Changing this value also clears the tests and fails
countersrw Counter .1.3.6.1.4.1.1955.5.5.1.4.3 |
frame-relay OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.2 |
reset-FR-statistic-countersThis command clears all the frame relay statistical
counters for both ports.rw Enumeration .1.3.6.1.4.1.1955.5.5.2.1 |
fR-Traffic-TableThe Statistics Table for the frame relay encryptor . SEQUENCE OF FR-Traffic-Entry .1.3.6.1.4.1.1955.5.5.2.2 |
fR-Traffic-Entry FR-Traffic-Entry .1.3.6.1.4.1.1955.5.5.2.2.1 |
frPort-IndexPort Number Index. The ifIndex Value of the
corresponding ifEntry from rfc1213.ro INTEGER .1.3.6.1.4.1.1955.5.5.2.2.1.1 |
frPort-TypePlain is on the local side, cipher the networkro Enumeration .1.3.6.1.4.1.1955.5.5.2.2.1.2 |
frGood-FramesThe total number of frames received by the
frame relay encryptor on a port.ro Counter .1.3.6.1.4.1.1955.5.5.2.2.1.3 |
frBad-FramesThe number of bad frames received by the frame relay encryptor on a
port. These are classified further in frRxErrTable.ro Counter .1.3.6.1.4.1.1955.5.5.2.2.1.4 |
frInactive-DLCIThe number of illegal or unknown DLCIs
received by the frame relay encryptor on a port.ro Counter .1.3.6.1.4.1.1955.5.5.2.2.1.5 |
frReceived-FECNThe number of frames with a forward congestion
notification received by the frame relay encryptor on a port.ro Counter .1.3.6.1.4.1.1955.5.5.2.2.1.6 |
frReceived-BECNThe number of frames with a backward congestion
notification received by the frame relay encryptor on a port.ro Counter .1.3.6.1.4.1.1955.5.5.2.2.1.7 |
frSent-FramesThe total number of frames transmitted by the
frame relay encryptor on a port.ro Counter .1.3.6.1.4.1.1955.5.5.2.2.1.8 |
frDropped-FramesThe total number of TX frames dropped by the
frame relay encryptor on a port.ro Counter .1.3.6.1.4.1.1955.5.5.2.2.1.9 |
fR-RX-Err-TableThe receive error information for a frame relay encryptor frame relay
port. SEQUENCE OF FR-RX-Err-Entry .1.3.6.1.4.1.1955.5.5.2.3 |
fR-RX-Err-Entry FR-RX-Err-Entry .1.3.6.1.4.1.1955.5.5.2.3.1 |
frRxErrIndexPort Number Index. The ifIndex Value of the
corresponding ifEntry from rfc1213.ro INTEGER .1.3.6.1.4.1.1955.5.5.2.3.1.1 |
frRxErrShort-FramesThe number of short frames received.ro Counter .1.3.6.1.4.1.1955.5.5.2.3.1.2 |
frRxErrAborted-FramesThe number of aborted frames received.ro Counter .1.3.6.1.4.1.1955.5.5.2.3.1.3 |
frRxErrResidual-BitsThe number of residual bit frames received.ro Counter .1.3.6.1.4.1.1955.5.5.2.3.1.4 |
frRxErrOverrunsThe number of overruns received.ro Counter .1.3.6.1.4.1.1955.5.5.2.3.1.5 |
frRxErrCRC-ErrorsThe number of CRC errors received.ro Counter .1.3.6.1.4.1.1955.5.5.2.3.1.6 |
configure OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3 |
pi-FR-Layer1 OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3.1 |
piFRInterface-InstalledThe type of Frame Relay Physical interface.
The following parameters are required for:
- RS422/V35/X21 clock source
- G703 E1 impedance, framemode, timeslots
- T1 T1 frame mode, timeslots.ro Enumeration .1.3.6.1.4.1.1955.5.5.3.1.1 |
piFRTX-Clock-SourceRequired if the physical type is:
RS422
V.35
X.21rw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.2 |
piFRE1-Plain-Port-Impedancerw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.3 |
piFRE1-Cipher-Port-Impedancerw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.4 |
piFRE1-Framing-Moderw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.5 |
piFRE1-Time-Slot-OptionsRequired if the physical type is G703 (E1)
E1 time slot options available:
Bit values shown in piFRE1-Time-Slots
all slots, except TS0 0xff, 0xff, 0xff, 0xfe
all slots, except TS0,TS16 0xff, 0xfe, 0xff, 0xferw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.6 |
piFRE1-Time-SlotsAn Octet bit string. Each bit defines an E1 time slot:
0= not used for frame relay
1= used for frame relayro OCTET STRING .1.3.6.1.4.1.1955.5.5.3.1.7 |
piFRT1-Plain-Port-Pulserw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.8 |
piFRT1-Cipher-Port-Pulserw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.9 |
piFRT1-Framing-Moderw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.10 |
piFRT1-Time-Slot-OptionsRequired if the physical type is T1
T1 time slot options available:
Bit values shown in piFRT1TimeSlots
all slots 0xff, 0xff, 0xffrw Enumeration .1.3.6.1.4.1.1955.5.5.3.1.11 |
piFRT1-Time-SlotsAn Octet bit string. Each bit defines a T1 time slot:
0= not used for frame relay
1= used for frame relayro OCTET STRING .1.3.6.1.4.1.1955.5.5.3.1.12 |
pi-FR-Layer2 OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3.2 |
pi-FR-Logical-Interface-TypeThe type of Frame Relay logical interface.
UNI = User to Network Interface
NNI = Network to Network Interfacero Enumeration .1.3.6.1.4.1.1955.5.5.3.2.1 |
pi-FR-Max-RX-FrameMaximum frame length in octets incomingrw Enumeration .1.3.6.1.4.1.1955.5.5.3.2.2 |
pi-FR-Max-TX-FrameMaximum frame length in octets outgoingrw Enumeration .1.3.6.1.4.1.1955.5.5.3.2.3 |
pi-FR-LMI-supportLMI versionrw Enumeration .1.3.6.1.4.1.1955.5.5.3.2.4 |
pi-FR-DLC-Ranges-TableThe Table of Active DLCIs. SEQUENCE OF Pi-FR-DLC-Ranges-Entry .1.3.6.1.4.1.1955.5.5.3.3 |
pi-FR-DLC-Ranges-Entry Pi-FR-DLC-Ranges-Entry .1.3.6.1.4.1.1955.5.5.3.3.1 |
piFRDLcRangeBandThe index number of this DLCI circuit band.ro INTEGER .1.3.6.1.4.1.1955.5.5.3.3.1.1 |
piFRDLcRangeUseThe Type of use to be applied to the range defined in
piFRDLcRangeStart and piFRDLcRangeEndrw Enumeration .1.3.6.1.4.1.1955.5.5.3.3.1.2 |
piFRDLcRangeModeFor future usero Enumeration .1.3.6.1.4.1.1955.5.5.3.3.1.3 |
piFRDLcRangeStartThe first DLCI in this bandrw INTEGER .1.3.6.1.4.1.1955.5.5.3.3.1.4 |
piFRDLcRangeEnd-set-to-activate-changesThe last DLCI in this band
Setting this parameter activates the changesrw INTEGER .1.3.6.1.4.1.1955.5.5.3.3.1.5 |
piRemotePorts OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3.5 |
pi-Remote-Port1 OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3.5.1 |
pi-Remote-Port1IP-AddressThe IP address for 1, the Ethernet linerw IpAddress .1.3.6.1.4.1.1955.5.5.3.5.1.1 |
pi-Remote-Port1Subnet-maskThe subnet mask associated with the IP address of
the 1 Ethernet line. The value of the mask is
an IP address with all the network bits set to 1
and all the host bits set to 0.rw IpAddress .1.3.6.1.4.1.1955.5.5.3.5.1.2 |
pi-Remote-Port1Gateway-AddressThe Gateway IP address for 1. The gateway is on the
same network as the port, so the network bits must be
identical to the port Ipaddressrw IpAddress .1.3.6.1.4.1.1955.5.5.3.5.1.3 |
piRemotePort2 OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3.5.2 |
pi-Remote-Port3 OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3.5.3 |
pi-Remote-Port3IP-AddressThe IP address for 1, the serial linerw IpAddress .1.3.6.1.4.1.1955.5.5.3.5.3.1 |
pi-Remote-Port3Subnet-maskThe subnet mask associated with the IP address of
the 3 serial line. The value of the mask is
an IP address with all the network bits set to 1
and all the host bits set to 0.rw IpAddress .1.3.6.1.4.1.1955.5.5.3.5.3.2 |
pi-Remote-Port3Gateway-AddressThe Gateway IP address for 3. The gateway is on the
same network as the port, so the network bits must be
identical to the port Ipaddressrw IpAddress .1.3.6.1.4.1.1955.5.5.3.5.3.3 |
pi-Remote-Port3Data-link-protocolThe type of Data link protocol. Currently only slip
is supportedro Enumeration .1.3.6.1.4.1.1955.5.5.3.5.3.4 |
pi-Remote-Port3BaudrateThe Baud rate for async port 3.
The other physical parameters are fixed as follows:
Character Length: 8 bits
Parity: none
Stopbits: 1rw Enumeration .1.3.6.1.4.1.1955.5.5.3.5.3.5 |
piApplication OBJECT IDENTIFIER .1.3.6.1.4.1.1955.5.5.3.6 |
pi-App-DLC-Cipher-TableThe table of encrypted DLCIs port. SEQUENCE OF Pi-App-DLC-Cipher-Entry .1.3.6.1.4.1.1955.5.5.3.6.1 |
pi-App-DLC-Cipher-Entry Pi-App-DLC-Cipher-Entry .1.3.6.1.4.1.1955.5.5.3.6.1.1 |
piAppDLcCipherBandThe index number of this DLCI circuit band.ro INTEGER .1.3.6.1.4.1.1955.5.5.3.6.1.1.1 |
piAppDLcCipherUseThe Type of use (plain or cipher) to be
applied to the range defined in
piAppDLcCipherStart and piAppDLcCipherEnd.rw Enumeration .1.3.6.1.4.1.1955.5.5.3.6.1.1.2 |
piAppDLcCipherStartThe first DLCI in this bandrw INTEGER .1.3.6.1.4.1.1955.5.5.3.6.1.1.3 |
piAppDLcCipherEnd-set-to-activate-changesThe last DLCI in this band
Setting this parameter activates the changesrw INTEGER .1.3.6.1.4.1.1955.5.5.3.6.1.1.4 |