FSCSERIAL-TRAP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for FSCSERIAL-TRAP-MIB.
68
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
equinox OBJECT IDENTIFIER .1.3.6.1.4.1.544 |
RFC1155-SMI Unknown .1.3.6.1.4.1.544 |
fscSerial OBJECT IDENTIFIER .1.3.6.1.4.1.544.8 |
fscSerialProducts OBJECT IDENTIFIER .1.3.6.1.4.1.544.8.1 |
fscSerialRebootStartedTrapThe appliance is in the process of rebooting.
The name of the user who initiated the reboot
is contained in fscSerialTrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.1 |
fscSerialUserLoginTrapA user logged into the appliance.
This trap is sent when a user logs into the CLI port or when a user
exits a serial session.
The name of the user who logged in is contained
in fscSerialTrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.2 |
fscSerialUserLogoutTrapA user logged out of the appliance. This trap is sent when a user
logs out of the CLI port or when a user exits a serial session.
The name of the user who logged out is contained
in fscSerialTrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.3 |
fscSerialSerialSessionStartedTrapA serial session has started.
The name of the user who is connected to the session
is contained in fscSerialTrapObjectUserName.
The port number on the appliance that the session is using is
contained in fscSerialTrapObjectSessionIdentifier.
The port name on the appliance that the session is using is
contained in fscSerialTrapObjectServerName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.4 |
fscSerialSerialSessionStoppedTrapA serial session has stoppped.
The name of the user who was connected to the session
is contained in fscSerialTrapObjectUserName.
The port number on the appliance that the session was using is
contained in fscSerialTrapObjectSessionIdentifier.
The name of the server the user was connected to is contained in
fscSerialTrapObjectServerName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.5 |
fscSerialSerialSessionTerminatedTrapA serial session has been terminated or preempted by another
user.
The name of the user who terminated or preempted the session is
contained in fscSerialTrapObjectUserName.
The name of the user who was terminated or preempted from the session
is contained in fscSerialTrapObjectTargetUserName.
The port number on the appliance that the session was using is
contained in fscSerialTrapObjectSessionIdentifier.
The name of the server the user was connected to is contained in
fscSerialTrapObjectServerName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.6 |
fscSerialImageUpgradeStartedTrapThe appliance has started an upgrade of a software image.
The name of the user who initiated the image upgrade is
contained in fscSerialTrapObjectUserName.
The type of image that is being upgraded is contained
in fscSerialTrapObjectImageType.
The version of the image that the appliance is upgrading to is
contained in fscSerialTrapObjectImageNewVersion.
The version of the image that the appliance is currently running
is contained in fscSerialTrapObjectImageCurrentVersion. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.7 |
fscSerialImageUpgradeResultsTrapThis object contains the results of the upgrade of a software image.
The result is contained in fscSerialTrapObjectImageUpgradeResults.
The type of software image the upgrade result is for is contained in
fscSerialTrapObjectImageType. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.8 |
fscSerialUserAddedTrapA new user has been added to the local user database.
The name of the user who added the new user is contained
in fscSerialTrapObjectUserName.
The name of the new user is contained in
fscSerialTrapObjectTargetUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.9 |
fscSerialUserDeletedTrapA user has been deleted from the local user database.
The name of the user who deleted the user is contained
in fscSerialTrapObjectUserName.
The name of the user who was deleted is contained
in fscSerialTrapObjectTargetUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.10 |
fscSerialUserModifiedTrapA user was modified.
The the name of the user who modified the user is contain
in fscSerialTrapObjectUserName.
The name of the user who was modified is contained
in fscSerialTrapObjectTargetUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.11 |
fscSerialUserAuthenticationFailureTrapA user failed to authenticate with the appliance.
The name of the user who failed to authenticate
is contained in fscSerialTrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.12 |
fscSerialFactoryDefaultsSetTrapThe appliance has been commanded to set itself to factory defaults.
The appliance sends this trap after being commanded to set itself
to factory defaults but prior to actually reverting to factory
defaults. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.13 |
fscSerialPortAlertTrapThe appliance detected a cry for help string on a serial port.
The serial port number the cry for help string was detected
on is contained in fscSerialTrapObjectPortNumber.
The cry for help string that was detected is contained
in fscSerialTrapObjectPortAlertString.
The serial port name the cry for help string was detected
on is contained in fscSerialTrapObjectServerName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.14 |
fscSerialConfigurationFileLoadedTrapThe appliance has loaded a configuration file.
The name of the user who commanded the appliance to
load the configuration file is contained in
fscSerialTrapObjectUserName.
The name of the file that was loaded is contained in
fscSerialTrapObjectFileName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.15 |
fscSerialUserDatabaseFileLoadedTrapThe appliance has loaded a user database file.
The name of the user who commanded the appliance to
load the user database file is contained in
fscSerialTrapObjectUserName.
The name of the file that was loaded is contained in
fscSerialTrapObjectFileName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.16 |
fscSerialPortPowerOnDetectTrapThe appliance monitor has detected that the power on/off control
signal is high on a serial port indicating that the server attached
to the port is powered on.
This trap is sent on initialization if the condition is detected.
Subsequent traps occur only if there is a transition of this signal
from low to high.
The affected port number is contained in
fscSerialTrapObjectPortNumber.
The name of the server connected to the serial port is contained in
fscSerialTrapObjectServerName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.17 |
fscSerialPortPowerOffDetectTrapThe appliance monitor has detected that the power on/off control
signal is low on a serial port indicating that server attached to
the port is powered off.
This trap is sent on initialization if the condition is detected.
Subsequent traps occur only if there is a transition of this signal
from high to low.
The affected port number is contained in
fscSerialTrapObjectPortNumber.
The name of the server connected to the serial port is contained in
fscSerialTrapObjectServerName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.18 |
fscSerialUserLockedTrapA user account has been locked.
The IP address of the client from which the last connection was
attempted is contained in fscSerialTrapObjectIPAddress.
If 0.0.0.0, then the user was locked attempting to authentication
from the local Serial CLI.
The name of the user who was locked is contained
in fscSerialTrapObjectTargetUserName.
The reason for which the user account has been locked is contained
in fscSerialTrapObjectLockReason. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.31 |
fscSerialUserUnlockedTrapA user account has been unlocked.
The IP address of the client that originated the unlock request
is contained in fscSerialTrapObjectIPAddress. When the user
account is unlocked by an appliance reboot or by the expiration
of the lockout period (as specified in the
fscSerialTrapObjectUnlockReason object), the IP address
will be 0.0.0.0.
The name of the user who unlocked the user is contained
in fscSerialTrapObjectUserName. When the user account is unlocked
by an appliance reboot or by the expiration of the lockout period
(as specified in the fscSerialTrapObjectUnlockReason object), the
name of the user will be blank.
The name of the user who was unlocked is contained
in fscSerialTrapObjectTargetUserName.
The reason for which the user account has been unlocked is contained
in fscSerialTrapObjectUnlockReason. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.32 |
fscSerialNFSDisableRqstdTrapThe request to disable NFS was sent.
The user that requested NFS disable is contained in
fscSerialTrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.34 |
fscSerialNFSUnmountedOKTrapThe appliance has completed the disable/unmount NFS.
This trap is sent after an NFS Disable request is made and confirms
that the unmount operation was successfully completed. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.35 |
fscSerialNFSEnableRqstdTrapThe request to enable NFS was sent.
The user that requested NFS enable is contained in
fscSerialTrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.36 |
fscSerialNFSMountedOKTrapThe appliance has completed the enable/mount NFS.
This trap is sent after an NFSEnable request is made and confirms
that the mount operation was successfully completed. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.37 |
fscSerialNFSMountVerifiedOKTrapThe appliance has verified that the NFS mount operation succedded. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.38 |
fscSerialNFSMountFailedRetryingTrapThe first NFS mount attempt failed.
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.39 |
fscSerialNFSMountFailedGaveUpTrapThe final NFS mount attempt failed. No more attempts to mount a NFS
will be maid.
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.40 |
fscSerialNFSMountLostRetryingTrapThis trap is sent when the NFS mount is lost.
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.41 |
fscSerialNFSMountLost1stRetryFailedTrapThe first NFS remount attempt failed.
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.42 |
fscSerialNFSMountLostGaveUpTrapThe final NFS remount attempt failed.
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.43 |
fscSerialNFSPortEnableRqstdTrapA request to enable a NFS port was sent.
The fscSerialTrapObjectUserName contains the name of the user that
requested this operation.
The fscSerialTrapObjectPortNumber returns the port number of
the NFS port to be enabled. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.44 |
fscSerialNFSPortDisableRqstdTrapA request to disable a NFS port was sent.
The fscSerialTrapObjectUserName contains the name of the user that
requested this operation.
The fscSerialTrapObjectPortNumber returns the port number of
the NFS port to be disabled. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.45 |
fscSerialNFSPortNeedsMountTrapThis trap is sent when a port needs mount.
The fscSerialTrapObjectPortNumber returns the port number of
the NFS port that needs remount.
The fscSerialTrapObjectNFSPortErrStatus returns the status of the
port at the time that this trap was generated.
The fscSerialTrapObjectNFSErrorReason returns the error codes for
this operation. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.46 |
fscSerialNFSPortOpenFailRetryingTrapThe first attempt to open a file using the NFS failed. Several
attempts will be made until the operation will get canceled.
The fscSerialTrapObjectPortNumber returns the port number of
the NFS port that failed.
The fscSerialTrapObjectNFSPortErrStatus returns the status of the
port at the time that this trap was generated.
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.47 |
fscSerialNFSPortOpenFailGaveUpTrapThe final attempt to open a file using the NFS failed. No more attempts
will be made and the operation will be canceled.
The fscSerialTrapObjectPortNumber returns the port number of
the NFS port that failed.
The fscSerialTrapObjectNFSPortErrStatus returns the status of the
port at the time that this trap was generated.
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.48 |
fscSerialNFSPortFileOpenOKTrapThis trap is sent when an attempt to open a file through NFS is
successful.
The fscSerialTrapObjectPortNumber returns the port number of
the NFS port that was successfully open. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.49 |
fscSerialNFSPortWriteErrorTrapThis trap is sent when a write file operation fails.
If multiple consecutive write operations fail, this trap is
only sent once, upon the occurrence of the first failure.
Once sent, this trap will not be sent again until a write operation has
been successfully performed, and a period of 15 minutes has elapsed
without any additional write operation failures and without any overrun
errors. (I.e. This trap is sent only when the status of the port is 'No
recent errors.)
The port number of the NFS port on which the failure occurred is
contained in fscSerialTrapObjectPortNumber.
The status of the NFS port on which the failure occurred is contained in
fscSerialTrapObjectNFSPortErrStatus. (This is the status of the port
at the time that the Trap was generated.)
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.50 |
fscSerialNFSPortOverrunErrorTrapThis trap is sent when an overrun occurs when writing to the file.
If multiple consecutive overruns occur, this trap is only sent once,
upon the occurrence of the first overrun.
Once sent, this trap will not be sent again until a write operation has
been successfully performed, and a period of 15 minutes has elapsed
without any additional overruns or write operation failures.
This trap is not sent if the most recent write operation failed or if
a write operation failed within the preceding 15 minute period.
(I.e. This trap is sent only when the status of the port is 'No recent
errors.)
The port number of the NFS port on which the failure occurred is
contained in fscSerialTrapObjectPortNumber.
The status of the NFS port on which the error occurred is contained in
fscSerialTrapObjectNFSPortErrStatus. (This is the status of the port
at the time that the Trap was generated.)
The fscSerialTrapObjectNFSPriErrorReason specifies the main reason
of failure and can have any value defined in NFSErrorReasonEnum.
The fscSerialTrapObjectNFSSecErrorReason specifies the secondary
reason of failure and can have any value defined in NFSErrorReasonEnum
or if there is no detailed reason then the value will be zero. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.51 |
fscSerialNFSPortNoRecentErrorsTrapThis trap is sent if the status of a port changes to a status of
'No recent errors' from one of the current or recent write and/or
overrun error status conditions.
The fscSerialTrapObjectPortNumber contains the number of the port
that has no errors. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.52 |
fscSerialNFSPortFileClosedTrapThe file open through a NFS port was successfully closed.
The fscSerialTrapObjectPortNumber returns the NFS port number
where the file was open. TRAP-TYPE .1.3.6.1.4.1.544.8.1.0.53 |
fscSerialManagement OBJECT IDENTIFIER .1.3.6.1.4.1.544.8.2 |
fscSerialTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.544.8.2.6 |
fscSerialTrapObjectUserNameThis object is sent in a trap to identify the name of the user
for which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.544.8.2.6.1 |
fscSerialTrapObjectTargetUserNameThis object is sent in a trap to identify the name of the target
user for which a trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.544.8.2.6.2 |
fscSerialTrapObjectImageTypeThis object is sent in a trap to identify the type of software image
for which the trap condition occurred. Enumeration .1.3.6.1.4.1.544.8.2.6.3 |
fscSerialTrapObjectImageNewVersionThis object is sent in a trap to identify the version of the new
software image the appliance is being upgraded to. DisplayString ( SIZE .1.3.6.1.4.1.544.8.2.6.4 |
fscSerialTrapObjectImageCurrentVersionThis object is sent in a trap to identify the version of the
software image that the appliance is currently running. DisplayString ( SIZE .1.3.6.1.4.1.544.8.2.6.5 |
fscSerialTrapObjectImageUpgradeResultsThis object contains the results of a software image upgrade. ImageFileUpgradeResultsEnum .1.3.6.1.4.1.544.8.2.6.6 |
fscSerialTrapObjectPortAlertStringThis object is sent in a trap to identify a cry for help string that
was detected on a serial port. UTF8String (SIZE .1.3.6.1.4.1.544.8.2.6.7 |
fscSerialTrapObjectSessionIdentifierThis object is sent in a trap to identify the serial port number
associated with a serial session for which the trap condition occurred. INTEGER .1.3.6.1.4.1.544.8.2.6.8 |
fscSerialTrapObjectPortNumberThis object is sent in a trap to identify the serial port number
for which the trap condition occurred. INTEGER .1.3.6.1.4.1.544.8.2.6.9 |
fscSerialTrapObjectFileNameThis object is sent in a trap to identify the name of a file
for which the trap condition occurred. DisplayString ( SIZE .1.3.6.1.4.1.544.8.2.6.10 |
fscSerialTrapObjectSPCDeviceLocationThis object is sent in a trap to identify the SPC Location Name
for which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.544.8.2.6.11 |
fscSerialTrapObjectSPCDeviceSerialPortThis object is sent in a trap to identify the appliance port that the
SPC is attached to for which the trap condition occurred. INTEGER .1.3.6.1.4.1.544.8.2.6.12 |
fscSerialTrapObjectSPCDeviceLoginThis object is sent in a trap to identify the Login Name
for which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.544.8.2.6.13 |
fscSerialTrapObjectSPCSocketThis object is sent in a trap to identify the SPC socket number
for which the trap condition occurred. INTEGER .1.3.6.1.4.1.544.8.2.6.14 |
fscSerialTrapObjectLockReasonThis object is sent in a trap to explain the reason for which a
user account has been locked. Enumeration .1.3.6.1.4.1.544.8.2.6.15 |
fscSerialTrapObjectUnlockReasonThis object is sent in a trap to explain the reason for which a
user account has been unlocked. Enumeration .1.3.6.1.4.1.544.8.2.6.16 |
fscSerialTrapObjectIPAddressThis object is sent in a trap to indicate the IP address of a user
session that has caused the trap. IpAddress .1.3.6.1.4.1.544.8.2.6.17 |
fscSerialTrapObjectAggregateServerStatusChangedThis object is sent in a trap to report server session status changes
and power status changes. This object will report the status for all
connection paths known to the appliance in an aggregated encoding format
as indicated below.
The information for each connection path is packed into four bytes as
follows:
Byte 1 = The serial port number associated with this path.
Byte 2 = The enumerated socket number of the SPC cascade device
associated with this connection path. The value will be 0
if an SPC socket is not associated with this
connection path.
The socket number enumeration will use this convention:
A1 = 1 C1 = 9
A2 = 2 C2 = 10
A3 = 3 C3 = 11
A4 = 4 C4 = 12
B1 = 5 D1 = 13
B2 = 6 D2 = 14
B3 = 7 D3 = 15
B4 = 8 D4 = 16
No SPC attached = 0
Byte 3 = The power status of a connected server or the power
status of an SPC socket. One of the following values
can be reported:
1 = unknown - unable to determine the power
status.
2 = on - the server or the SPC socket is powered on.
3 = off - the server or the SPC socket is powered
off.
Byte 4 = The serial session status. One of the following values
can be reported:
1 = N/A - not applicable when an SPC is attached.
2 = Idle - there is no active viewer session on this
path.
3 = Active - there is an active viewer session currently
on this path.
Each connection path will be packed into this object in four byte
increments one after the other. The connection paths do not have to be
packed in any specific order.
Note that the size of this object could conceivably be as large as
shown in the following calculation assuming a 16 socket SPC were
connected to each serial port of the appliance:
48 ports X 16 sockets X 4 bytes = 3072 bytes.ro OCTET STRING ( SIZE .1.3.6.1.4.1.544.8.2.6.18 |
fscSerialTrapObjectServerNameThis object is sent in a trap to identify the name of the server
for which the trap condition occurred. The value of this object
comes from an instance of the Port Table Name object.
If this object is reported in a trap that is specific to a serial
port on the appliance then the value of this object will be the
same as the serial port's Port Table Name. UTF8String ( SIZE .1.3.6.1.4.1.544.8.2.6.19 |
fscSerialTrapObjectNFSPriErrorReasonThis object is sent in a trap to identify the reason for the error
encountered.
In case of no error being reported, this object will have a value of
9999 (no error). If an error is being reported (the value is non-zero),
then, depending on the error, the fscSerialTrapObjectNFSSecErrorReason
may also have a non-zero value (and thereby provide additional
information about the error), or the
fscSerialTrapObjectNFSPriErrorReason may have a value of 0 (if no more
detail is available for the error). NFSErrorReasonEnum .1.3.6.1.4.1.544.8.2.6.20 |
fscSerialTrapObjectNFSSecErrorReasonThis object is sent in a trap to identify the reason for the error
encountered.
In case of no error being reported, this object will have a value of
9999 (no error). If an error is being reported (i.e the value of
fscSerialTrapObjectNFSPriErrorReason is non-zero), then depending on
the error the fscSerialTrapObjectNFSSecErrorReason
may also have a non-zero value (and thereby provide additional
information about the error), or the
fscSerialTrapObjectNFSPriErrorReason may have a value of 0 (if no more
detail is available for the error). NFSErrorReasonEnum .1.3.6.1.4.1.544.8.2.6.21 |
fscSerialTrapObjectNFSPortErrStatusThis object is sent in a trap to identify the error status on the
specified port. NFSPortErrStatusEnum .1.3.6.1.4.1.544.8.2.6.22 |