FOUNDRY-SN-CAM-MIB
AI MIB Summary
FOUNDRY-SN-CAM-MIB provides SNMP access to monitor Content Addressable Memory (CAM) table statistics and entry states on Foundry/Brocade Layer 2 switching hardware. This module enables the tracking of MAC address table utilization, aging timers, and dynamic entry counts to verify switch forwarding table integrity and detect potential flooding or security anomalies.
The MIB module to describe generic objects for the usage of Content Addressable Memory (CAM).
Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
snCamMIB.1.3.6.1.4.1.11308.2.1.1
37
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
snCamMIBThe MIB module to describe generic objects for the usage of
Content Addressable Memory (CAM).
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.11308.2.1.1 |
snCamObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11308.2.1.1.1 |
snCamProfileThis object identifies CAM partition profile. Each profile
adjusts the partitions to optimize the device for corresponding
applications.ro Enumeration .1.3.6.1.4.1.11308.2.1.1.1.1 |
snCamUsage OBJECT IDENTIFIER .1.3.6.1.4.1.11308.2.1.1.1.2 |
snCamUsageL3TableA list of snCamUsageL3 entries. This table contains
information of the entity's CAM usage for layer 3 traffic. SEQUENCE OF SnCamUsageL3Entry .1.3.6.1.4.1.11308.2.1.1.1.2.1 |
snCamUsageL3EntryAn entry containing management information applicable to
CAM usage for layer 3 traffic SnCamUsageL3Entry .1.3.6.1.4.1.11308.2.1.1.1.2.1.1 |
snCamUsageL3SlotA number which uniquely identifies a linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.1.1.1 |
snCamUsageL3ProcessorA number which uniquely identifies the network processor within a
linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.1.1.2 |
snCamUsageL3TypeThis object identifies the type of layer 3 traffic passing through the
network processor. Enumeration .1.3.6.1.4.1.11308.2.1.1.1.2.1.1.3 |
snCamUsageL3SupernetThis object identifies the Supernet for the layer 3 type traffic. It
provides information for longest match lookup. For example, zero
indicates all the bits of IP address will be matched, and one indicates
all but the lowest bit in IP address will be matched. The range is
[0..32] for IPv4 and IPv4VPN, where a value of 32 indicates the entry is
the total of other supernets indexed by [0..31]. The range is [0..10] for
IPv6, where a value of 10 indicates the entry is the total of other
supernets indexed by [0..9]. Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.1.1.4 |
snCamUsageL3SizeThe effective CAM size for this layer 3 traffic entry. For ipv4 traffic, each
unit is 4 bytes. For ipv4vpn, each unit is 8 bytes. For ipv6, each unit is
16 bytes.ro Unsigned32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.1.1.5 |
snCamUsageL3FreeThe amount of CAM currently available for this layer 3 traffic entry. For ipv4
traffic, each unit is 4 bytes. For ipv4vpn, each unit is 8 bytes. For ipv6, each
unit is 16 bytes.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.1.1.6 |
snCamUsageL3UsedPercentThe percentage of CAM currently being used for this layer 3 traffic entry.ro Percent .1.3.6.1.4.1.11308.2.1.1.1.2.1.1.7 |
snCamUsageL2TableA list of snCamUsageL2 entries. This table contains information of
the entity's CAM usage for layer 2 traffic. SEQUENCE OF SnCamUsageL2Entry .1.3.6.1.4.1.11308.2.1.1.1.2.2 |
snCamUsageL2EntryAn entry containing management information applicable to
CAM usage for layer 2 traffic SnCamUsageL2Entry .1.3.6.1.4.1.11308.2.1.1.1.2.2.1 |
snCamUsageL2SlotA number which uniquely identifies a linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.2.1.1 |
snCamUsageL2ProcessorA number which uniquely identifies the network processor within a
linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.2.1.2 |
snCamUsageL2TypeThis object identifies the type of layer 2 traffic passing through
the network processor. Enumeration .1.3.6.1.4.1.11308.2.1.1.1.2.2.1.3 |
snCamUsageL2SizeThe effective CAM size for this layer 2 traffic entry. Each unit is 8 bytes.ro Unsigned32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.2.1.4 |
snCamUsageL2FreeThe amount of CAM currently available for this layer 2 traffic entry.
Each unit is 8 bytes.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.2.1.5 |
snCamUsageL2UsedPercentThe percentage of CAM currently being used for this layer 2 traffic entry.ro Percent .1.3.6.1.4.1.11308.2.1.1.1.2.2.1.6 |
snCamUsageSessionTableA list of snCamUsageSession entries. This table contains information
of the entitiy's CAM usage for sessions. SEQUENCE OF SnCamUsageSessionEntry .1.3.6.1.4.1.11308.2.1.1.1.2.3 |
snCamUsageSessionEntryAn entry containing management information applicable to CAM usage
for sessions. SnCamUsageSessionEntry .1.3.6.1.4.1.11308.2.1.1.1.2.3.1 |
snCamUsageSessionSlotA number which uniquely identifies a linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.3.1.1 |
snCamUsageSessionProcessorA number which uniquely identifies the network processor within a
linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.3.1.2 |
snCamUsageSessionTypeThis object identifies the type of sessions. Enumeration .1.3.6.1.4.1.11308.2.1.1.1.2.3.1.3 |
snCamUsageSessionSizeThe effective CAM size for this session traffic entry. For IPv4 sessions,
each unit is 16 bytes. For IPv4 sessions, each unit is 64 bytes.ro Unsigned32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.3.1.4 |
snCamUsageSessionFreeThe amount of CAM currently available this session traffic entry.
For IPv4 sessions, each unit is 16 bytes. For IPv4 sessions, each unit is
64 bytes.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.3.1.5 |
snCamUsageSessionUsedPercentThe percentage of CAM currently being used by this session traffic entryro Percent .1.3.6.1.4.1.11308.2.1.1.1.2.3.1.6 |
snCamUsageOtherTableA list of snCamUsageOther entries. This table contains information
of the entitiy's CAM usage for types other than L3, L2, or Session. SEQUENCE OF SnCamUsageOtherEntry .1.3.6.1.4.1.11308.2.1.1.1.2.4 |
snCamUsageOtherEntryAn entry containing management information applicable to CAM usage
for types other than L3, L2, or Session SnCamUsageOtherEntry .1.3.6.1.4.1.11308.2.1.1.1.2.4.1 |
snCamUsageOtherSlotA number which uniquely identifies a linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.4.1.1 |
snCamUsageOtherProcessorA number which uniquely identifies the network processor within a
linecard in the device Unsigned32 .1.3.6.1.4.1.11308.2.1.1.1.2.4.1.2 |
snCamUsageOtherTypeThis object identifies the type. Enumeration .1.3.6.1.4.1.11308.2.1.1.1.2.4.1.3 |
snCamUsageOtherSizeThe effective CAM size for this Other traffic entry. For GRE,
each unit is 8 bytes. For multicast VPLS, each unit is 16 bytes.ro Unsigned32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.4.1.4 |
snCamUsageOtherFreeThe amount of CAM currently available this Other traffic entry.
For GRE, each unit is 8 bytes. For multicast VPLS, each unit is 16 bytes.ro Gauge32 UNITS "Entries" .1.3.6.1.4.1.11308.2.1.1.1.2.4.1.5 |
snCamUsageOtherUsedPercentThe percentage of CAM currently being used by this entryro Percent .1.3.6.1.4.1.11308.2.1.1.1.2.4.1.6 |