FORCEPOINT-NGFW-ENGINE-MIB
AI MIB Summary
The FORCEPOINT-NGFW-ENGINE-MIB provides SNMP access to internal engine statistics and operational states for Forcepoint Next-Generation Firewalls, including session throughput, threat detection counters, and protocol-specific event logs. This module enables centralized monitoring of the firewall's core processing engine performance and security event generation without requiring direct CLI or API access.
Top level enterprise MIB for Forcepoint NGFW
Main OID:
forcepointNGFWEngineMib.1.3.6.1.4.1.47565.1.1
190
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
190 total| Object Name |
|---|
forcepointNGFWEngineMibTop level enterprise MIB for Forcepoint NGFW MODULE-IDENTITY .1.3.6.1.4.1.47565.1.1 |
engineNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.47565.1.1.0 |
fwPolicyInstallA firewall policy was (re)installed NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.1 |
nodeOnlineA node has gone to an online state NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.2 |
nodeOfflineA node has gone to an offline or standby state NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.3 |
nodeBootA node has booted up NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.4 |
nodeShutdownA node is shutting down NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.5 |
nodeUserLoginA user has started a login session NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.6 |
nodeFailedUserLoginFailed user login NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.7 |
nodeUserLogoutA user has finished session NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.8 |
nodeTestFailureNodeTest has failed NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.9 |
nodeHwmonHardware monitoring system has detected problems NOTIFICATION-TYPE .1.3.6.1.4.1.47565.1.1.0.10 |
engineObjects OBJECT IDENTIFIER .1.3.6.1.4.1.47565.1.1.1 |
fwSoftwareVersionVersion string of the firewall softwarero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.1 |
fwSecurityPolicyName of the current security policy on the firewallro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.2 |
fwPolicyTimeThe time when the security policy was installed to the firewallro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.3 |
fwConnNumberNumber of current connectionsro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.47565.1.1.1.4 |
fwAcceptedNumber of accepted packetsro Counter64 .1.3.6.1.4.1.47565.1.1.1.5 |
fwDroppedNumber of dropped packetsro Counter64 .1.3.6.1.4.1.47565.1.1.1.6 |
fwLoggedNumber of logged packetsro Counter64 .1.3.6.1.4.1.47565.1.1.1.7 |
fwAccountedNumber of accounted packetsro Counter64 .1.3.6.1.4.1.47565.1.1.1.8 |
fwRejectedNumber of rejected packetsro Counter64 .1.3.6.1.4.1.47565.1.1.1.9 |
fwIfStatsTableThis table contains an entry for each interface in system SEQUENCE OF FwIfStatsEntry .1.3.6.1.4.1.47565.1.1.1.10 |
fwIfStatsEntryRow for an interface FwIfStatsEntry .1.3.6.1.4.1.47565.1.1.1.10.1 |
fwIfStatsIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. Integer32 .1.3.6.1.4.1.47565.1.1.1.10.1.1 |
fwIfNameName of interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.10.1.2 |
fwIfAcceptedPktsNumber of accepted packets by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.3 |
fwIfDroppedPktsNumber of dropped packets by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.4 |
fwIfLoggedPktsNumber of logged packets by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.5 |
fwIfAccountedPktsNumber of accounted packets by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.6 |
fwIfRejectedPktsNumber of rejected packets by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.7 |
fwIfAcceptedBytesNumber of accepted bytes by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.8 |
fwIfDroppedBytesNumber of dropped bytes by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.9 |
fwIfLoggedBytesNumber of logged bytes by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.10 |
fwIfAccountedBytesNumber of accounted bytes by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.11 |
fwIfRejectedBytesNumber of rejected bytes by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.12 |
fwIfForwardedPktsNumber of forwarded packets by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.13 |
fwIfForwardedBytesNumber of forwarded bytes by firewall rulesro Counter64 .1.3.6.1.4.1.47565.1.1.1.10.1.14 |
fwIfCommentComment of interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.10.1.15 |
fwHardware OBJECT IDENTIFIER .1.3.6.1.4.1.47565.1.1.1.11 |
fwCpuStatsTableThis table contains an entry for each CPU in a system and total usage of all cpus. SEQUENCE OF FwCpuEntry .1.3.6.1.4.1.47565.1.1.1.11.1 |
fwCpuStatsEntryRow with information about CPU usage FwCpuEntry .1.3.6.1.4.1.47565.1.1.1.11.1.1 |
fwCpuStatsIdA unique value, greater than zero, for each CPU in the managed system. First element with Id '0' is designed for total values. Integer32 .1.3.6.1.4.1.47565.1.1.1.11.1.1.1 |
fwCpuNameName of data current line concernro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.11.1.1.2 |
fwCpuTotalThe total CPU load percentagero Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.3 |
fwCpuUserThe percentage of time the CPU has spent running users' processes that are not nicedro Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.4 |
fwCpuSystemThe percentage of time the CPU has spent running the kernel and its processesro Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.5 |
fwCpuNiceThe percentage of time the CPU has spent running users' processes that have been nicedro Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.6 |
fwCpuIdleThe percentage of time the CPU was idlero Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.7 |
fwCpuIoWaitThe percentage of time the CPU has been waiting for I/O to completero Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.8 |
fwCpuHwIrqThe percentage of time the CPU has been servicing hardware interruptsro Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.9 |
fwCpuSoftIrqThe percentage of time the CPU has been servicing software interruptsro Unsigned32 UNITS "percent" .1.3.6.1.4.1.47565.1.1.1.11.1.1.10 |
fwMemoryInfo OBJECT IDENTIFIER .1.3.6.1.4.1.47565.1.1.1.11.2 |
fwSwapBytesTotalTotal swap spacero CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.1 |
fwSwapBytesUsedUsed space of swapro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.2 |
fwSwapBytesUnusedAmount of unused space of swapro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.3 |
fwMemBytesTotalNumber of available bytes of physical memoryro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.4 |
fwMemBytesUsedAmount of memory being in usero CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.5 |
fwMemBytesUnusedAmount of unused bytes of physical memoryro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.6 |
fwMemBytesBuffersAmount of memory used as buffersro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.7 |
fwMemBytesCachedAmount of memory used as cachero CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.8 |
fwMemBytesSReclaimableAmount of reclaimable Slab memoryro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.9 |
fwMemBytesAvailableAmount of memory availablero CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.10 |
fwInspectionBytesUsedAmount of inspection memory being usedro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.47565.1.1.1.11.2.11 |
fwInspectionPercentageUsedAmount of inspection memory being used as a percentage of memory given to inspectionro Unsigned32 .1.3.6.1.4.1.47565.1.1.1.11.2.12 |
fwDiskStatsTableTable contains an entry for each partition mounted in a system. SEQUENCE OF FwDiskStatsEntry .1.3.6.1.4.1.47565.1.1.1.11.3 |
fwDiskStatsEntryRow of information concerning one partition FwDiskStatsEntry .1.3.6.1.4.1.47565.1.1.1.11.3.1 |
fwPartitionIndexA unique value, greater than zero, for each partition Integer32 .1.3.6.1.4.1.47565.1.1.1.11.3.1.1 |
fwPartitionDevNameA unique name of a devicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.11.3.1.2 |
fwMountPointNameName of a mount pointro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.11.3.1.3 |
fwPartitionSizeTotal size of the partitionro CounterBasedGauge64 UNITS "kbytes" .1.3.6.1.4.1.47565.1.1.1.11.3.1.4 |
fwPartitionUsedAmount of used space of the partition (in kilobytes)ro CounterBasedGauge64 UNITS "kbytes" .1.3.6.1.4.1.47565.1.1.1.11.3.1.5 |
fwPartitionAvailInformation about amount of free space on partition (in kilobytes)ro CounterBasedGauge64 UNITS "kbytes" .1.3.6.1.4.1.47565.1.1.1.11.3.1.6 |
fwNewConnectionsSNumber of new connections / secondro Counter64 .1.3.6.1.4.1.47565.1.1.1.11.4 |
fwDiscardedConnectionsSNumber of discarded connections / secondro Counter64 .1.3.6.1.4.1.47565.1.1.1.11.5 |
fwRefusedConnectionsSNumber of refused connections / secondro Counter64 .1.3.6.1.4.1.47565.1.1.1.11.6 |
fwVpnEp4TableThis table contains an entry for each IPv4 VPN end-point pair SEQUENCE OF FwVpnEp4Entry .1.3.6.1.4.1.47565.1.1.1.12 |
fwVpnEp4EntryRow for an IPv4 VPN end-point pair FwVpnEp4Entry .1.3.6.1.4.1.47565.1.1.1.12.1 |
fwVpnEp4IndexA unique value, greater than zero, for each end-point pair. Integer32 .1.3.6.1.4.1.47565.1.1.1.12.1.1 |
fwVpnEp4LocalLocal IPv4 end-point addressro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.47565.1.1.1.12.1.2 |
fwVpnEp4RemoteRemote IPv4 end-point addressro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.47565.1.1.1.12.1.3 |
fwVpnEp4RemoteTypeThe type of remote VPN end-pointro VpnEndpointType .1.3.6.1.4.1.47565.1.1.1.12.1.4 |
fwVpnEp4ReceivedBytesNumber of received bytes between the end-point pairro Counter64 .1.3.6.1.4.1.47565.1.1.1.12.1.5 |
fwVpnEp4SentBytesNumber of sent bytes between the end-point pairro Counter64 .1.3.6.1.4.1.47565.1.1.1.12.1.6 |
fwVpnEp4IpsecSaNumber of currently established IPsec SAs between the end-point pairro Counter32 .1.3.6.1.4.1.47565.1.1.1.12.1.7 |
fwVpnEp6TableThis table contains an entry for each IPv6 VPN end-point pair SEQUENCE OF FwVpnEp6Entry .1.3.6.1.4.1.47565.1.1.1.13 |
fwVpnEp6EntryRow for an IPv6 VPN end-point pair FwVpnEp6Entry .1.3.6.1.4.1.47565.1.1.1.13.1 |
fwVpnEp6IndexA unique value, greater than zero, for each end-point pair. Integer32 .1.3.6.1.4.1.47565.1.1.1.13.1.1 |
fwVpnEp6LocalLocal IPv6 end-point addressro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.47565.1.1.1.13.1.2 |
fwVpnEp6RemoteRemote IPv6 end-point addressro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.47565.1.1.1.13.1.3 |
fwVpnEp6RemoteTypeThe type of remote VPN end-pointro VpnEndpointType .1.3.6.1.4.1.47565.1.1.1.13.1.4 |
fwVpnEp6ReceivedBytesNumber of received bytes between the end-point pairro Counter64 .1.3.6.1.4.1.47565.1.1.1.13.1.5 |
fwVpnEp6SentBytesNumber of sent bytes between the end-point pairro Counter64 .1.3.6.1.4.1.47565.1.1.1.13.1.6 |
fwVpnEp6IpsecSaNumber of currently established IPsec SAs between the end-point pairro Counter32 .1.3.6.1.4.1.47565.1.1.1.13.1.7 |
fwMbrInterfaceTableThis table contains an entry for each cellular interface in system SEQUENCE OF FwMbrInterfaceEntry .1.3.6.1.4.1.47565.1.1.1.14 |
fwMbrInterfaceEntryRow for a cellular interface FwMbrInterfaceEntry .1.3.6.1.4.1.47565.1.1.1.14.1 |
fwMbrInterfaceIndexA unique value, greater than zero, for each cellular interface or interface sub-layer in the managed system. Integer32 .1.3.6.1.4.1.47565.1.1.1.14.1.1 |
fwMbrNameModem namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.14.1.2 |
fwMbrBandUsedInterface band in usero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.14.1.3 |
fwMbrSignalStrengthModem signal strength in dBmro Integer32 UNITS "dBm" .1.3.6.1.4.1.47565.1.1.1.14.1.4 |
fwMbrStatusStatus of the modem (not present, ok, warning, error, fatal error)ro FwHwComponentStatus .1.3.6.1.4.1.47565.1.1.1.14.1.5 |
fwDiskSerialNumberDisk serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.15 |
fwHwTempSensorTableThis table contains an entry for each temperature sensor in system SEQUENCE OF FwHwTempSensorEntry .1.3.6.1.4.1.47565.1.1.1.16 |
fwHwTempSensorEntryRow for a temperature sensor FwHwTempSensorEntry .1.3.6.1.4.1.47565.1.1.1.16.1 |
fwHwTempSensorIndexA unique value, greater than zero, for each temperature sensor Integer32 .1.3.6.1.4.1.47565.1.1.1.16.1.1 |
fwHwTemperatureNameName of the temperature sensorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.16.1.2 |
fwHwTemperatureTemperature in degrees C for the given temperature sensorro Integer32 UNITS "degrees C" .1.3.6.1.4.1.47565.1.1.1.16.1.3 |
fwHwTemperatureStatusStatus of the temperature sensor (not present, ok, warning, error, fatal error)ro FwHwComponentStatus .1.3.6.1.4.1.47565.1.1.1.16.1.4 |
fwPsuTableThis table contains an entry for each power supply unit in system SEQUENCE OF FwPsuEntry .1.3.6.1.4.1.47565.1.1.1.17 |
fwPsuEntryRow for a PSU FwPsuEntry .1.3.6.1.4.1.47565.1.1.1.17.1 |
fwPsuIndexA unique value, greater than zero, for each PSU Integer32 .1.3.6.1.4.1.47565.1.1.1.17.1.1 |
fwPsuNameName of the PSUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.17.1.2 |
fwPsuStatusStatus of the PSU (not present, ok, warning, error, fatal error)ro FwHwComponentStatus .1.3.6.1.4.1.47565.1.1.1.17.1.3 |
fwFanTableThis table contains an entry for each fan in system SEQUENCE OF FwFanEntry .1.3.6.1.4.1.47565.1.1.1.18 |
fwFanEntryRow for a fan FwFanEntry .1.3.6.1.4.1.47565.1.1.1.18.1 |
fwFanIndexA unique value, greater than zero, for each fan Integer32 .1.3.6.1.4.1.47565.1.1.1.18.1.1 |
fwFanNameFan namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.18.1.2 |
fwFanFan speed in RPMro Integer32 UNITS "RPM" .1.3.6.1.4.1.47565.1.1.1.18.1.3 |
fwFanStatusStatus of the fan (not present, ok, warning, error, fatal error)ro FwHwComponentStatus .1.3.6.1.4.1.47565.1.1.1.18.1.4 |
netNodeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.47565.1.1.1.19 |
nodeClusterIdThe identification number of the cluster this node belongs toro Integer32 .1.3.6.1.4.1.47565.1.1.1.19.1 |
nodeMemberIdNode's member identification within the clusterro Integer32 .1.3.6.1.4.1.47565.1.1.1.19.2 |
nodeOperStateThe operative (clustering) state of the nodero Enumeration .1.3.6.1.4.1.47565.1.1.1.19.3 |
nodeCPULoadThe CPU load percentage on the nodero Integer32 .1.3.6.1.4.1.47565.1.1.1.19.4 |
nodeLastLoginThe most recent login event on the nodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.5 |
nodeLastLoginTimeTimestamp of the most recent login event on the nodero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.6 |
nodeTestTableThis table contains an entry for each test instance that was configured to send a trap on test failure SEQUENCE OF NodeTestEntry .1.3.6.1.4.1.47565.1.1.1.19.7 |
nodeTestEntryRow for a test instance NodeTestEntry .1.3.6.1.4.1.47565.1.1.1.19.7.1 |
nodeTestIndexUnique positive integer index of the nodeTest instance Unsigned32 .1.3.6.1.4.1.47565.1.1.1.19.7.1.1 |
nodeTestIdentityIdentification string of a nodeTestro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.7.1.2 |
nodeTestResultThe most recent result of the nodeTestro Enumeration .1.3.6.1.4.1.47565.1.1.1.19.7.1.3 |
nodeTestResultTimeThe timestamp of the most recent result of the nodeTestro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.7.1.4 |
nodeHwmonEventReason for the hardware monitoring eventro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.8 |
nodeApplianceModelAppliance model namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.9 |
nodePosCodeAppliance POS codero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.10 |
nodeLoginTimeThe most recent login event on the nodero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.11 |
nodePolicyApplyTimeThe time when the security policy was installed to the nodero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.12 |
nodeHardwareSerialNumberHardware chassis serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.19.13 |
fwVoltageTableThis table contains an entry for each voltage in system SEQUENCE OF FwVoltageEntry .1.3.6.1.4.1.47565.1.1.1.20 |
fwVoltageEntryRow for a voltage FwVoltageEntry .1.3.6.1.4.1.47565.1.1.1.20.1 |
fwVoltageIndexA unique value, greater than zero, for each voltage Integer32 .1.3.6.1.4.1.47565.1.1.1.20.1.1 |
fwVoltageNameVoltage namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.20.1.2 |
fwVoltageVoltage in voltsro FwFixedThousandths UNITS "V" .1.3.6.1.4.1.47565.1.1.1.20.1.3 |
fwVoltageStatusStatus of the voltage (not present, ok, warning, error, fatal error)ro FwHwComponentStatus .1.3.6.1.4.1.47565.1.1.1.20.1.4 |
fwVETableThis table contains an entry for each virtual engine SEQUENCE OF FwVEEntry .1.3.6.1.4.1.47565.1.1.1.21 |
fwVEEntryRow for virtual engine FwVEEntry .1.3.6.1.4.1.47565.1.1.1.21.1 |
fwVEIndexA unique value, greater that zero, for each virtual engine. Integer32 .1.3.6.1.4.1.47565.1.1.1.21.1.1 |
fwVEEngineIdEngine ID of the virtual enginero Integer32 .1.3.6.1.4.1.47565.1.1.1.21.1.2 |
fwVENameName of the virtual enginero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.21.1.3 |
fwVEStatusStatus of the virtual engine e.g. Activero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.21.1.4 |
fwIfStatsProcTableThis table contains an entry for each interface in system SEQUENCE OF FwIfStatsProcEntry .1.3.6.1.4.1.47565.1.1.1.22 |
fwIfStatsProcEntryRow for an interface FwIfStatsProcEntry .1.3.6.1.4.1.47565.1.1.1.22.1 |
fwIfStatsProcIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. Integer32 .1.3.6.1.4.1.47565.1.1.1.22.1.1 |
fwIfProcNameName of interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47565.1.1.1.22.1.2 |
fwIfProcReceivedBytesNumber of good received bytes, corresponding to rx_packets. For IEEE 802.3 devices should count the length of Ethernet Frames excluding the FCS.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.3 |
fwIfProcReceivedPacketsNumber of good packets received by the interface. For hardware interfaces counts all good packets received from the device by the host, including packets which host had to drop at various stages of processing (even in the driver).ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.4 |
fwIfProcReceivedErrsTotal number of bad packets received on this network device. This counter must include events counted by rx_length_errors, rx_crc_errors, rx_frame_errors and other errors not otherwise counted.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.5 |
fwIfProcReceivedDropNumber of packets received but not processed, e.g. due to lack of resources or unsupported protocol. For hardware interfaces this counter may include packets discarded due to L2 address filtering but should not include packets dropped by the device due to buffer exhaustion which are counted separately in rx_missed_errors (since procfs folds those two counters together).ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.6 |
fwIfProcReceivedFifoHistorically the count of overflow events. Those events may be reported in the receive descriptors or via interrupts, and may not correspond one-to-one with dropped packets. This statistics was used interchangeably with rx_over_errors. Not recommended for use in drivers for high speed interfaces. This statistic is used on software devices, e.g. to count software packet queue overflow (can) or sequencing errors (GRE).ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.7 |
fwIfProcReceivedFrameReceiver frame alignment errors. Part of aggregate frame errors in /proc/net/dev. For IEEE 802.3 devices this counter should be equivalent to: - 30.3.1.1.7 aAlignmentErrorsro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.8 |
fwIfProcReceivedCompressedNumber of correctly received compressed packets. This counters is only meaningful for interfaces which support packet compression (e.g. CSLIP, PPP).ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.9 |
fwIfProcReceivedMulticastMulticast packets received. For hardware interfaces this statistic is commonly calculated at the device level (unlike rx_packets) and therefore may include packets which did not reach the host. For IEEE 802.3 devices this counter may be equivalent to: - 30.3.1.1.21 aMulticastFramesReceivedOKro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.10 |
fwIfProcTransmitBytesNumber of good transmitted bytes, corresponding to tx_packets. For IEEE 802.3 devices should count the length of Ethernet Frames excluding the FCS.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.11 |
fwIfProcTransmitPacketsNumber of packets successfully transmitted. For hardware interfaces counts packets which host was able to successfully hand over to the device, which does not necessarily mean that packets had been successfully transmitted out of the device, only that device acknowledged it copied them out of host memory.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.12 |
fwIfProcTransmitErrsTotal number of transmit problems. This counter must include events counter by tx_aborted_errors, tx_carrier_errors, tx_fifo_errors, tx_heartbeat_errors, tx_window_errors and other errors not otherwise counted.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.13 |
fwIfProcTransmitDropNumber of packets dropped on their way to transmission, e.g. due to lack of resources.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.14 |
fwIfProcTransmitFifoNumber of frame transmission errors due to device FIFO underrun / underflow. This condition occurs when the device begins transmission of a frame but is unable to deliver the entire frame to the transmitter in time for transmission. Part of aggregate carrier errors in /proc/net/dev.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.15 |
fwIfProcTransmitCollsNumber of collisions during packet transmissions.ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.16 |
fwIfProcTransmitCarrierNumber of frame transmission errors due to loss of carrier during transmission. Part of aggregate carrier errors in /proc/net/dev. For IEEE 802.3 devices this counter must be equivalent to: - 30.3.1.1.13 aCarrierSenseErrorsro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.17 |
fwIfProcTransmitCompressedNumber of transmitted compressed packets. This counters is only meaningful for interfaces which support packet compression (e.g. CSLIP, PPP).ro Counter64 .1.3.6.1.4.1.47565.1.1.1.22.1.18 |
engineGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47565.1.1.2 |
firewallGeneralInformationGroupA collection of objects giving general information about the firewall Unknown .1.3.6.1.4.1.47565.1.1.2.1 |
firewallIfaceStatsGroupA collection of objects giving information about the current firewall interface related traffic statistics Unknown .1.3.6.1.4.1.47565.1.1.2.2 |
firewallGeneralStatsGroupA collection of objects giving general information about the firewall traffic statistics Unknown .1.3.6.1.4.1.47565.1.1.2.3 |
firewallHardwareGroupA collection of objects giving information about the hardware parameters Unknown .1.3.6.1.4.1.47565.1.1.2.4 |
firewallMbrInterfaceGroupA collection of objects giving information about the Mbr related parameters Unknown .1.3.6.1.4.1.47565.1.1.2.5 |
firewallPerformanceGroupA collection of objects giving information about the performance related parameters Unknown .1.3.6.1.4.1.47565.1.1.2.6 |
firewallVpnEpGroupA collection of objects giving information about the configured VPN end-point pairs Unknown .1.3.6.1.4.1.47565.1.1.2.7 |
nodeIdentificationGroupA collection of objects identifying the node in a cluster Unknown .1.3.6.1.4.1.47565.1.1.2.8 |
nodeStatusGroupA collection of objects giving information about the status of the node Unknown .1.3.6.1.4.1.47565.1.1.2.9 |
nodeLoginGroupA collection of objects giving information about logins into the node Unknown .1.3.6.1.4.1.47565.1.1.2.10 |
nodeTesterGroupA collection of objects giving information about the tests in the test subsystem of the node Unknown .1.3.6.1.4.1.47565.1.1.2.11 |
firewallGeneralNotifGroupA collection of notification giving information about general events in the firewall Unknown .1.3.6.1.4.1.47565.1.1.2.12 |
nodeStatusNotificationsGroupA collection of notifications informing about changes in a node's status Unknown .1.3.6.1.4.1.47565.1.1.2.13 |
nodeLoginNotificationsGroupA collection of notifications informing about user logins Unknown .1.3.6.1.4.1.47565.1.1.2.14 |
nodeTesterNotificationsGroupA collection of notifications informing about test failures Unknown .1.3.6.1.4.1.47565.1.1.2.15 |
nodeHwmonNotificationsGroupA collection of notifications informing about hardware monitoring issues Unknown .1.3.6.1.4.1.47565.1.1.2.16 |
nodeHwmonGroupA collection of objects giving information about hardware monitoring events in the node Unknown .1.3.6.1.4.1.47565.1.1.2.17 |
engineVEGroupA collection of objects giving information about Virtual Engines in the Engine Unknown .1.3.6.1.4.1.47565.1.1.2.18 |
firewallIfaceStatsProcGroupA collection of objects giving information about the current firewall interface related traffic statistics Unknown .1.3.6.1.4.1.47565.1.1.2.19 |