Home/Catalog/FCTR-MIB

FCTR-MIB

Detailed view of the defined objects, syntax rules, and hierarchical paths.

Objects

Active

Status

Dependencies

Imported Objects

RFC1155-SMI

RFC-1212

Objects

16 total

Object Name	Syntax	OID
nbase OBJECT IDENTIFIER `.1.3.6.1.4.1.629`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.629`
RFC1155-SMI Unknown `.1.3.6.1.4.1.629`	Unknown	`.1.3.6.1.4.1.629`
nbSwitchG1 OBJECT IDENTIFIER `.1.3.6.1.4.1.629.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.629.1`
nbSwitchG1Il OBJECT IDENTIFIER `.1.3.6.1.4.1.629.1.50`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.629.1.50`
nbFctr OBJECT IDENTIFIER `.1.3.6.1.4.1.629.1.50.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.629.1.50.2`
nbFctrInfo OBJECT IDENTIFIER `.1.3.6.1.4.1.629.1.50.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.629.1.50.2.1`
nbFctrMgmtTypeDescribes type of Flow Controle of the device. The nbFctrPortsRunTable and nbFctrPortsPermTable tables may not be supported in the per-device-only(2) case. Set new value for nbFctrGlbReqRun and/or nbFctrGlbReqPerm in per-port (3) should change this value for all ports in nbFctrPortsRunTable and/or nbFctrPortsPermTable.ro Enumeration `.1.3.6.1.4.1.629.1.50.2.1.1`	Enumeration	`.1.3.6.1.4.1.629.1.50.2.1.1`
nbFctrGlbReqRunRequested mode of the device immediately to be set.rw RequestedFlowControlMode `.1.3.6.1.4.1.629.1.50.2.1.2`	RequestedFlowControlMode	`.1.3.6.1.4.1.629.1.50.2.1.2`
nbFctrGlbGrntdRunActual mode of the device.ro GrantedFlowControlMode `.1.3.6.1.4.1.629.1.50.2.1.3`	GrantedFlowControlMode	`.1.3.6.1.4.1.629.1.50.2.1.3`
nbFctrGlbReqPermRequested mode of the device, will be implemented from begin after next reset/reboot.rw RequestedFlowControlMode `.1.3.6.1.4.1.629.1.50.2.1.4`	RequestedFlowControlMode	`.1.3.6.1.4.1.629.1.50.2.1.4`
nbFctrPortsTableFlow control per port configuration table. SEQUENCE OF NbFctrPortEntry `.1.3.6.1.4.1.629.1.50.2.2`	SEQUENCE OF NbFctrPortEntry	`.1.3.6.1.4.1.629.1.50.2.2`
nbFctrPortEntryDescribes Flow control configuration of the port. NbFctrPortEntry `.1.3.6.1.4.1.629.1.50.2.2.1`	NbFctrPortEntry	`.1.3.6.1.4.1.629.1.50.2.2.1`
nbFctrPortNumber of Port to be managed.ro INTEGER `.1.3.6.1.4.1.629.1.50.2.2.1.1`	INTEGER	`.1.3.6.1.4.1.629.1.50.2.2.1.1`
nbFctrPortRunReqModeRequested mode of the port immediately to be set.rw RequestedFlowControlMode `.1.3.6.1.4.1.629.1.50.2.2.1.2`	RequestedFlowControlMode	`.1.3.6.1.4.1.629.1.50.2.2.1.2`
nbFctrPortRunGrntdActual mode of the port.ro GrantedFlowControlMode `.1.3.6.1.4.1.629.1.50.2.2.1.3`	GrantedFlowControlMode	`.1.3.6.1.4.1.629.1.50.2.2.1.3`
nbFctrPortPermReqModeRequested mode of the port immediately to be set.rw RequestedFlowControlMode `.1.3.6.1.4.1.629.1.50.2.2.1.4`	RequestedFlowControlMode	`.1.3.6.1.4.1.629.1.50.2.2.1.4`

More MIBs from Nbase

Browse all NbaseMIBs →

NBS-CMMC-MIB

SNMP MIB module

530 objects→

NBS-COHERENT-MIB

The NBS-COHERENT-MIB module enables monitoring of Coherent CFP (Common Form Factor Pluggable) optical transceiver parameters, including optical power levels, temperature, bias current, and voltage, on network interface cards supporting the Coherent CFP form factor.

247 objects→

RT-CFG-MIB

Standard SNMP MIB module defining data structures for RT-CFG-MIB.

246 objects→

NBASE-G1-MIB

Standard SNMP MIB module defining data structures for NBASE-G1-MIB.

SNMP MIB module

The NBS-SLA-MIB module enables the monitoring and management of Service Level Agreement (SLA) performance metrics, such as latency, jitter, packet loss, and availability, for network services within NBS (Nortel Broadband Services) infrastructure. It facilitates the collection of SLA violation data and compliance status to support automated quality-of-service assurance and reporting.

139 objects→