Home/Catalog/ES-RACKTIVITY-MIB

ES-RACKTIVITY-MIB

AI MIB Summary

The ES-RACKTIVITY-MIB facilitates SNMP monitoring of Racktivity rack-mounted servers and blade enclosures, specifically exposing hardware telemetry such as power supply status, fan speeds, temperature sensors, and chassis intrusion events. This module enables centralized management of physical infrastructure health and environmental conditions within data center rack deployments.

The MIB module for the Racktivity Devices
Main OID:
esRACKTIVITYMIB.1.3.6.1.4.1.34097.9
472
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-CONF
SNMPv2-TC

Objects

472 total
Object Name
racktivity
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097
esRACKTIVITYMIBThe MIB module for the Racktivity Devices
MODULE-IDENTITY
.1.3.6.1.4.1.34097.9
racktivityNotif
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.0
errorValueTooHighRaisedThis trap is sent when an element goes above the specified error threshold indicating the maximum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.16
errorValueTooLowRaisedThis trap is sent when an element goes below the specified error threshold indicating the minimum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.17
errorRaisedThis trap is sent when an element gets into an error state
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.18
errorValueTooHighClearedThis trap is sent when an element goes below the specified error threshold indicating the maximum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.19
errorValueTooLowClearedThis trap is sent when an element goes above the specified error threshold indicating the minimum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.20
errorClearedThis trap is sent when an element recovers from an error state
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.21
warningValueTooHighRaisedThis trap is sent when an element goes above the specified warning threshold indicating the maximum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.48
warningValueTooLowRaisedThis trap is sent when an element goes below the specified warning threshold indicating the minimum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.49
warningRaisedThis trap is sent when an element gets into an warning state
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.50
warningValueTooHighClearedThis trap is sent when an element goes below the specified warning threshold indicating the maximum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.51
warningValueTooLowClearedThis trap is sent when an element goes above the specified warning threshold indicating the minimum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.52
warningClearedThis trap is sent when an element recovers from an warning state
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.53
warningMicroInterruptionThis event is raised when a micro interruption is detected above a threshold time
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.54
warningPhaseShiftThis event is raised when a phase shift is detected above a threshold
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.55
infoValueTooHighRaisedThis trap is sent when an element goes above a specified threshold indicating the maximum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.80
infoValueTooLowRaisedThis trap is sent when an element goes below a specified threshold indicating the minimum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.81
infoRaisedThis trap is sent when an element gets into a specific state
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.82
infoValueTooHighClearedThis trap is sent when an element goes below a specified threshold indicating the maximum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.83
infoValueTooLowClearedThis trap is sent when an element goes above a specified threshold indicating the minimum value for this element
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.84
infoClearedThis trap is sent when an element recovers from a specific state
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.85
infoPortStateChangedThis trap is sent when a port changes state for any reason
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.96
infoResetThis trap is sent when a module is reboot
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.97
infoUpgradeThis trap is sent when upgrade or downgrade of firmware is completed
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.98
infoPortScheduleThis trap is sent when a port changes state because of a scheduling
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.99
infoHeartbeatThis trap is sent when a heartbeat has occurred
NOTIFICATION-TYPE
.1.3.6.1.4.1.34097.9.0.100
esRacktivityConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.2
esRacktivityMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.2.1
esRacktivityMIBGroupAll accessible objects in a Racktivity device
Unknown
.1.3.6.1.4.1.34097.9.2.1.1
esRacktivityNotificationGroupAll notification that can be sent out by a Racktivity device
Unknown
.1.3.6.1.4.1.34097.9.2.1.2
esRacktivityMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.2.2
esRacktivityConplianceThe compliance statements for a Racktivity device.
Unknown
.1.3.6.1.4.1.34097.9.2.2.1
esnModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.65
eESNTableTemperature Humidity Presure Airflow Waterleak
SEQUENCE OF EESNEntry
.1.3.6.1.4.1.34097.9.65.1
eESNEntryTemperature Humidity Presure Airflow Waterleak
EESNEntry
.1.3.6.1.4.1.34097.9.65.1.1
aGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.1
aSpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.2
aCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.65.1.1.3
aVoltageGets the voltage of a power module. (unit: 0.01V)ro
Uhundredth UNITS "V"
.1.3.6.1.4.1.34097.9.65.1.1.4
aStatePortCurGets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.ro
CURPORTSTATE
.1.3.6.1.4.1.34097.9.65.1.1.8
aTemperatureGets the current temperature of a temperature sensor. (unit: 0.1K)ro
Utenth UNITS "K"
.1.3.6.1.4.1.34097.9.65.1.1.11
aHumidityGets the relative humidity. (unit: 0.1RH)ro
Utenth UNITS "RH"
.1.3.6.1.4.1.34097.9.65.1.1.12
aAirflowGets the current airflow level. (unit: 0.1m/s)ro
Utenth UNITS "m/s"
.1.3.6.1.4.1.34097.9.65.1.1.23
aDewPointGets the current dewpoint. Taking the current humidity into consideration, condensation will occur if the temperature drops below this level. (unit: 0.1K)ro
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.25
aPressureGets the atmospheric pressure. (unit: 0.1hPa)ro
Utenth UNITS "hPa"
.1.3.6.1.4.1.34097.9.65.1.1.26
aAnalogueInputGets the value of an analog input (voltage). (unit: mV)ro
Unsigned32 UNITS "mV"
.1.3.6.1.4.1.34097.9.65.1.1.27
aWaterleakGets the current state of the water leak sensor.ro
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.28
aMotionDetectedGets or resets whether motion has been detected.ro
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.29
aIOPortGets the state of a digital input.ro
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.30
aHighCurrentThe current for high values (unit: 0.1A)ro
Stenth (-32768..32767) UNITS "A"
.1.3.6.1.4.1.34097.9.65.1.1.41
aHighPowerThe power for high values (unit: 0.01kW)ro
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.65.1.1.43
aModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.65.1.1.10001
aFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.65.1.1.10002
aHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.65.1.1.10003
aFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.65.1.1.10004
aHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.65.1.1.10005
aDisplayTimeOnGets, sets or defaults the display sleep timer. If the display is inactive for longer than this time, the display turns off to save power. Time is in minutes. (unit: min)rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10032
aMaxVoltageWarningGets, sets or defaults the maximum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.65.1.1.10047
aMinVoltageWarningGets, sets or defaults the minimum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.65.1.1.10049
aMinTemperatureWarningGets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.10052
aMaxTemperatureWarningGets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.10053
aMinHumidityWarningGets, sets or defaults the minimum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH)rw
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.10054
aMaxHumidityWarningGets, sets or defaults the maximum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH)rw
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.10055
aCurrentWarningEventEnables or disables the SNMP trap if the outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10078
aPowerWarningEventEnables or disables the SNMP trap if the power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10080
aVoltageWarningEventEnables or disables the SNMP trap if the voltage warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10086
aTemperatureWarningEventEnables or disables the SNMP trap if the temperature warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10087
aHumidityWarningEventEnables or disables the SNMP trap if the humidity warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10088
aDewPointWarningGets, sets or defaults the dewpoint warning level. If the temperature difference between the current temperature and the dewpoint temperature drops below this value, an event is generated. (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.10092
aDewPointWarningEventEnables or disables the SNMP trap if the dewpoint warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10093
aDewPointViolationEventEnables or disables the SNMP trap if the dewpoint temperature is reached.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10094
aPressureWarningEventEnables or disables the SNMP trap if the atmospheric pressure warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10095
aMinPressureWarningGets, sets or defaults the minimum atmospheric pressure warning level. (unit: 0.1hPa)rw
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.10096
aMaxPressureWarningGets, sets or defaults the maximum atmospheric pressure warning level. (unit: 0.1hPa)rw
Utenth
.1.3.6.1.4.1.34097.9.65.1.1.10097
aDisplayBrightnessGets, sets or defaults the display brightness (if supported).rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10098
aMotionSensitivityGets, sets or defaults the sensitivity of a motion sensor.rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10107
aExternalSensorLabelGets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.65.1.1.10109
aRelayLabelGets, sets or defaults an Energy Sensor relay label.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.65.1.1.10110
aMinAnalogueInputWarningGets, sets or defaults the lower warning level for an analog input. A warning is generated if this level is exceeded. (unit: mV)rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10111
aMaxAnalogueInputWarningGets, sets or defaults the upper warning level for an analog input. A warning is generated if this level is exceeded.rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10112
aWaterleakWarningGets, sets or defaults the water leak detection state (0 = disabled, other values = enabled).rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10113
aMinAirflowWarningGets, sets or defaults the minimum warning level for an airflow sensor. A warning is generated if this level is exceeded.rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10114
aMaxAirflowWarningGets, sets or defaults the maximum warning level for an airflow sensor. A warning is generated if this level is exceeded.rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10115
aAnalogueInputWarningEventEnables or disables the SNMP trap if the analog input warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10116
aWaterleakWarningEventEnables or disables the SNMP trap if a water leak is detected.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10117
aAirflowWarningEventEnables or disables the SNMP trap if the airflow warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10118
aRelayAssertActionEventEnables or disables the SNMP trap if an Energy Sensor relay is asserted.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10119
aRelayDeassertActionEventEnables or disables the SNMP trap if an Energy Sensor relay is deasserted.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10120
aMotionWarningGets, sets or defaults the motion warning threshold.rw
Unsigned32
.1.3.6.1.4.1.34097.9.65.1.1.10141
aMotionWarningEventEnables or disables the SNMP trap if the motion warning threshold is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10149
aDeviceIDThe ID of the device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.65.1.1.10150
aDeviceVersionThe version of the device.ro
Version
.1.3.6.1.4.1.34097.9.65.1.1.10151
aSysNameThe full name of the device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.65.1.1.10152
aMaxHighCurrentWarningGets sets or defaults the maximum high current warning level. (unit: 0.1A)rw
Stenth (-32768..32767) UNITS "A"
.1.3.6.1.4.1.34097.9.65.1.1.10165
aMinHighCurrentWarningGets sets or defaults the minimum high current warning level. (unit: 0.1A)rw
Stenth (-32768..32767) UNITS "A"
.1.3.6.1.4.1.34097.9.65.1.1.10176
aMinHighPowerWarningGets sets or defaults the power min high current warning level. (unit: 0.01kW)rw
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.65.1.1.10177
aMaxHighPowerWarningGets sets or defaults the power max high current warning level. (unit: 0.01kW)rw
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.65.1.1.10178
aIOPortWarningEventEnables or disables the SNMP trap if the IO Port change state.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.65.1.1.10192
esnIndexIndex for the selected ESN Module
Integer32
.1.3.6.1.4.1.34097.9.65.1.1.65537
esnModuleIndexSelected ESN Module
Integer32
.1.3.6.1.4.1.34097.9.65.1.1.65538
threephasepowerModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.66
eThreePhasePowerTableNO_INFO
SEQUENCE OF EThreePhasePowerEntry
.1.3.6.1.4.1.34097.9.66.1
eThreePhasePowerEntryNO_INFO
EThreePhasePowerEntry
.1.3.6.1.4.1.34097.9.66.1.1
threephasepowerIndexIndex for the selected ThreePhasePower Module
Integer32
.1.3.6.1.4.1.34097.9.66.1.1.65537
threephasepowerModuleIndexSelected ThreePhasePower Module
Integer32
.1.3.6.1.4.1.34097.9.66.1.1.65538
displaymoduleModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.68
eDisplayModuleTableNO_INFO
SEQUENCE OF EDisplayModuleEntry
.1.3.6.1.4.1.34097.9.68.1
eDisplayModuleEntryNO_INFO
EDisplayModuleEntry
.1.3.6.1.4.1.34097.9.68.1.1
dGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.68.1.1.1
dSpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.68.1.1.2
dCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.68.1.1.3
dTemperatureGets the current temperature of a temperature sensor. (unit: 0.1K)ro
Utenth UNITS "K"
.1.3.6.1.4.1.34097.9.68.1.1.11
dTimeOnlineGets the amount of seconds since the last reset. (unit: s)ro
Unsigned32 UNITS "s"
.1.3.6.1.4.1.34097.9.68.1.1.24
dModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.68.1.1.10001
dFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.68.1.1.10002
dHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.68.1.1.10003
dFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.68.1.1.10004
dHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.68.1.1.10005
dMinTemperatureWarningGets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.68.1.1.10052
dMaxTemperatureWarningGets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.68.1.1.10053
dDisplayAllDevicesIf a display need to show all devices or just a small listrw
Unsigned32
.1.3.6.1.4.1.34097.9.68.1.1.10237
displaymoduleIndexIndex for the selected DisplayModule Module
Integer32
.1.3.6.1.4.1.34097.9.68.1.1.65537
displaymoduleModuleIndexSelected DisplayModule Module
Integer32
.1.3.6.1.4.1.34097.9.68.1.1.65538
energymonitorModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.69
eEnergyMonitorTableNO_INFO
SEQUENCE OF EEnergyMonitorEntry
.1.3.6.1.4.1.34097.9.69.1
eEnergyMonitorEntryNO_INFO
EEnergyMonitorEntry
.1.3.6.1.4.1.34097.9.69.1.1
eGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.69.1.1.1
eSpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.69.1.1.2
eCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.69.1.1.3
eVoltageGets the voltage of a power module. (unit: 0.01V)ro
Uhundredth UNITS "V"
.1.3.6.1.4.1.34097.9.69.1.1.4
eFrequencyGets the frequency of the input voltage of a power module. (unit: 0.001Hz)ro
Uthousandth UNITS "Hz"
.1.3.6.1.4.1.34097.9.69.1.1.5
eCurrentGets the current of an outlet. (unit: 0.001A)ro
Uthousandth UNITS "A"
.1.3.6.1.4.1.34097.9.69.1.1.6
ePowerGets the power of an outlet. (unit: W)ro
Unsigned32 UNITS "W"
.1.3.6.1.4.1.34097.9.69.1.1.7
eActiveEnergyGets the energy used by an outlet. (unit: 0.001kWh)ro
Uthousandth UNITS "kWh"
.1.3.6.1.4.1.34097.9.69.1.1.9
eApparentEnergyGets the apparent energy used by an outlet. (unit: 0.001kVAh)ro
Uthousandth UNITS "kVAh"
.1.3.6.1.4.1.34097.9.69.1.1.10
eTemperatureGets the current temperature of a temperature sensor. (unit: 0.1K)ro
Utenth UNITS "K"
.1.3.6.1.4.1.34097.9.69.1.1.11
eApparentPowerGets the apparent power of an outlet. (unit: VA)ro
Unsigned32 UNITS "VA"
.1.3.6.1.4.1.34097.9.69.1.1.15
ePowerFactorGets the power factor of an outlet. (unit: %)ro
Unsigned32 UNITS "%"
.1.3.6.1.4.1.34097.9.69.1.1.16
eTotalCurrentGets the total current of a power module. (unit: 0.001A)ro
Uthousandth UNITS "A"
.1.3.6.1.4.1.34097.9.69.1.1.17
eTotalRealPowerGets the total power level of a power module. (unit: W)ro
Unsigned32 UNITS "W"
.1.3.6.1.4.1.34097.9.69.1.1.18
eTotalApparentPowerGets the total apparent power of a power module. (unit: VA)ro
Unsigned32 UNITS "VA"
.1.3.6.1.4.1.34097.9.69.1.1.19
eTotalActiveEnergyGets the total energy of a power module. (unit: 0.001kWh)ro
Uthousandth UNITS "kWh"
.1.3.6.1.4.1.34097.9.69.1.1.20
eTotalApparentEnergyGets the total apparent energy of a power module. (unit: 0.001kVAh)ro
Uthousandth UNITS "kVAh"
.1.3.6.1.4.1.34097.9.69.1.1.21
eTotalPowerFactorGets the total power factor of a power module. (unit: %)ro
Unsigned32 UNITS "%"
.1.3.6.1.4.1.34097.9.69.1.1.22
eTimeOnlineGets the amount of seconds since the last reset. (unit: s)ro
Unsigned32 UNITS "s"
.1.3.6.1.4.1.34097.9.69.1.1.24
eTotalHarmonicDistortiontotal harmonic distortion - outlet (unit: 0.1%)ro
Utenth
.1.3.6.1.4.1.34097.9.69.1.1.50
eModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.69.1.1.10001
eFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.69.1.1.10002
eHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.69.1.1.10003
eFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.69.1.1.10004
eHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.69.1.1.10005
eMaxCurrentWarningGets, sets or defaults the maximum current warning level of an outlet. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.69.1.1.10039
eMaxPowerWarningGets, sets or defaults the maximum power warning level of an outlet. (unit: W)rw
Unsigned32
.1.3.6.1.4.1.34097.9.69.1.1.10041
eMaxTotalCurrentWarningGets, sets or defaults the total maximum current warning level of a power module. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.69.1.1.10043
eMaxTotalPowerWarningGets, sets or defaults the maximum total power warning level. (unit: W)rw
Unsigned32
.1.3.6.1.4.1.34097.9.69.1.1.10045
eMaxVoltageWarningGets, sets or defaults the maximum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.69.1.1.10047
eMinVoltageWarningGets, sets or defaults the minimum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.69.1.1.10049
eMinTemperatureWarningGets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.69.1.1.10052
eMaxTemperatureWarningGets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.69.1.1.10053
eCurrentWarningEventEnables or disables the SNMP trap if the outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.69.1.1.10078
ePowerWarningEventEnables or disables the SNMP trap if the power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.69.1.1.10080
eTotalCurrentWarningEventEnables or disables the SNMP trap if the total outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.69.1.1.10082
eTotalPowerWarningEventEnables or disables the SNMP trap if the total power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.69.1.1.10084
eVoltageWarningEventEnables or disables the SNMP trap if the voltage warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.69.1.1.10086
eTemperatureWarningEventEnables or disables the SNMP trap if the temperature warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.69.1.1.10087
eMicroIntTimeThresholdThe minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)rw
Utenth
.1.3.6.1.4.1.34097.9.69.1.1.10135
eMicroIntEventEnables or disables the SNMP trap if a microinterruption on the voltage is detected.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.69.1.1.10136
energymonitorIndexIndex for the selected EnergyMonitor Module
Integer32
.1.3.6.1.4.1.34097.9.69.1.1.65537
energymonitorModuleIndexSelected EnergyMonitor Module
Integer32
.1.3.6.1.4.1.34097.9.69.1.1.65538
masterModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.77
eMasterTableNO_INFO
SEQUENCE OF EMasterEntry
.1.3.6.1.4.1.34097.9.77.1
eMasterEntryNO_INFO
EMasterEntry
.1.3.6.1.4.1.34097.9.77.1.1
mGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.1
mSpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.2
mCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.77.1.1.3
mVoltageGets the voltage of a power module. (unit: 0.01V)ro
Uhundredth UNITS "V"
.1.3.6.1.4.1.34097.9.77.1.1.4
mTemperatureGets the current temperature of a temperature sensor. (unit: 0.1K)ro
Utenth UNITS "K"
.1.3.6.1.4.1.34097.9.77.1.1.11
mCurrentIPGets the current IP address. To set the IP address, use IPADDR instead.ro
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.14
mTotalCurrentGets the total current of a power module. (unit: 0.001A)ro
Uthousandth UNITS "A"
.1.3.6.1.4.1.34097.9.77.1.1.17
mTotalRealPowerGets the total power level of a power module. (unit: W)ro
Unsigned32 UNITS "W"
.1.3.6.1.4.1.34097.9.77.1.1.18
mTotalActiveEnergyGets the total energy of a power module. (unit: 0.001kWh)ro
Uthousandth UNITS "kWh"
.1.3.6.1.4.1.34097.9.77.1.1.20
mLineCurrentGets the current line current. (unit: 0.001A)ro
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.32
mFuseCurrentGets the current through a fuse. (unit: 0.001A)ro
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.33
mCurrentSubNetMaskGets the current subnet mask. To set the subnet mask use SNMSK instead.ro
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.34
mCurrentDNSServerGets the current DNS server. To set the DNS server use DNSSRV instead.ro
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.35
mCurrentStdGatewayGets the current standard gateway. To set the standard gateway use STDGW instead.ro
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.36
mUPSPresentChecks if a UPS is present.ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.37
mUPSStatusGets the working status of a UPS (if its working on its batteries or not).ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.38
mUPSEstimatedRunTimeGets the estimated run time of a UPS. (unit: min)ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.39
mUPSBatteryLevelThe current UPS battery level. (unit: 0.1%)ro
Utenth
.1.3.6.1.4.1.34097.9.77.1.1.40
mHighCurrentThe current for high values (unit: 0.1A)ro
Stenth UNITS "A"
.1.3.6.1.4.1.34097.9.77.1.1.41
mUpsCommunicationStatusStatus information of communication with the UPSro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.42
mHighPowerThe power for high values (unit: 0.01kW)ro
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.77.1.1.43
mTotalHighCurrentThe current for high values (unit: 0.1A)ro
Stenth
.1.3.6.1.4.1.34097.9.77.1.1.44
mTotalHighPowerThe power for high values (unit: 0.01kW)ro
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.77.1.1.45
mPositiveEnergyGets the positive energy used by an outlet. (unit: 0.001kWh)ro
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.46
mNegativeEnergyGets the negative energy used by an outlet. (unit: 0.001kWh)ro
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.47
mTotalPositiveEnergyGets the positive energy of the module. (unit: 0.001kWh)ro
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.48
mTotalNegativeEnergyGets the negative energy of the module. (unit: 0.001kWh)ro
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.49
mCloudStatusGets the status of the connection with the cloud. 0 = Idle state; 1 = Disabled; 2 = Initialising; 3 = Initialising - No connection; 4 = Initialising - No key; 5 = Connection Ok; 6 = Connection Failed; 7 = Connection Failed - No key.ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.56
mStatusstatus of a modulero
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.1000
mModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10001
mFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.77.1.1.10002
mHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.77.1.1.10003
mFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10004
mHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10005
mRackNameGets, sets or defaults the name of the rack.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10006
mRackPositionGets, sets or defaults the position in the rack.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10007
mIPAddressGets, sets or defaults the IP address (when DHCP is disabled).rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10011
mSubNetMaskGets, sets or defaults the subnet mask (when DHCP is disabled).rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10012
mStdGateWayGets, sets or defaults the standard gateway (when DHCP is disabled).rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10013
mDnsServerGets, sets or defaults the IP address of the used DNS server (when DHCP is disabled).rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10014
mMACGets the MAC address of a master module.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10015
mDHCPEnableEnables, disables or defaults DHCP. Set to 1 to enable DHCP, or 0 to disable DHCP.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10016
mNTPServerGets, sets or defaults the NTP (Network Time Protocol) server IP address.rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10017
mUseDefaultNTPServerEnables, disables or defaults the usage of the default NTP (Network Time Protocol) server (pool.ntp.org).rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10018
mUseNTPEnables, disables or defaults NTP (Network Time Protocol). Set to 1 to enable NTP, or 0 to disable NTP.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10019
mSNMPTrapRecvIPGets, sets or defaults the SNMP trap receiver IP address.rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10020
mSNMPTrapRecvPortGets, sets or defaults the SNMP tap receiver port.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10021
mSNMPControlEnables, disables or defaults write access over SNMP. Set to 1 to disable write access, or 0 to enable write access.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10024
mECSServerGets, sets or defaults the ECS (Energy Cloud Sentinel) server IP address.rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10028
mUseECSServerEnables, disables or defaults the use of an ECS (Energy Cloud Sentinel) server. Set to 1 to enable or 0 to disable.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10029
mDisplayLockGets, sets or defaults the display lock. If the display is locked, you can still view information on the display, but you are not allowed to change settings through the menu system.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10031
mDisplayTimeOnGets, sets or defaults the display sleep timer. If the display is inactive for longer than this time, the display turns off to save power. Time is in minutes. (unit: min)rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10032
mMaxVoltageWarningGets, sets or defaults the maximum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.77.1.1.10047
mMinVoltageWarningGets, sets or defaults the minimum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.77.1.1.10049
mMinTemperatureWarningGets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.77.1.1.10052
mMaxTemperatureWarningGets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.77.1.1.10053
mGeneralEventEnableGets, sets or defaults general events. If set to 0, no events will be generated. Set to 1 to generate events on media indicated by the event bitfields.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10074
mSNMPSysContactGets, sets or defaults the SNMP contact information.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10075
mCurrentWarningEventEnables or disables the SNMP trap if the outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10078
mPowerWarningEventEnables or disables the SNMP trap if the power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10080
mTotalCurrentWarningEventEnables or disables the SNMP trap if the total outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10082
mTotalPowerWarningEventEnables or disables the SNMP trap if the total power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10084
mVoltageWarningEventEnables or disables the SNMP trap if the voltage warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10086
mTemperatureWarningEventEnables or disables the SNMP trap if the temperature warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10087
mDisplayBrightnessGets, sets or defaults the display brightness (if supported).rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10098
mECSServerPortGets, sets or defaults the ECS (Energy Cloud Sentinel) server port.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10106
mExternalSensorLabelGets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10109
mHttpsOnlyEnables or disables the use of HTTPS (secure HTTP). Set to 1 to enable HTTPS only, or 0 to also enable HTTP.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10127
mTelnetSslEnables or disables the use of Telnet SSL (secure Telnet). Set to 1 to enable Telnet SSL, or 0 to disable Telnet SSL).rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10128
mCookieTimeToLiveThe TTL (Time To Live) of the website cookie. (unit: min)rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10130
mLineCurrentWarningThresholdGets, sets the warning threshold of the linecurrent. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.10131
mLineCurrentOffThresholdGets, sets the off threshold of the linecurrent. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.10132
mLineCurrentWarningEventEnables or disables the SNMP trap if the linecurrent warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10133
mLineCurrentOffEventEnables or disables the SNMP trap if the linecurrent off level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10134
mFuseCurrentWarningThresholdGets, sets or defaults the maximum current warning threshold per fuse. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.10142
mFuseCurrentOffThresholdGets, sets or defaults the maximum current off threshold per fuse. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.77.1.1.10143
mFuseCurrentWarningEventEnables or disables the SNMP trap if the fusecurrent warning threshold is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10144
mFuseCurrentOffEventEnables or disables the SNMP trap if the fusecurrent off threshold is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10145
mDeviceIDThe ID of the device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10150
mDeviceVersionThe version of the device.ro
Version
.1.3.6.1.4.1.34097.9.77.1.1.10151
mSysNameThe full name of the device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10152
mElectricalTopologyGets the electrical topology of the unit.ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10153
mFusePortTopologyGets the topology between the outlets and fuses.ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10154
mLineFuseTopologyGets the topology between the inlet (cable or connection) and the fuses.ro
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10155
mSSOIPAddressGets, sets the IP address of an SSO (Smart Style Office).rw
IpAddress
.1.3.6.1.4.1.34097.9.77.1.1.10156
mSSOLoginCredentialsGets, sets the login credentials of an SSO (Smart Style Office).rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10157
mSSOGracefullShutdownGets, sets the string to send if the UPS' battery level is below the set threshold.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10158
mUPSWarningLevelGets, sets or defaults the graceful shutdown threshold of a UPS.rw
Utenth
.1.3.6.1.4.1.34097.9.77.1.1.10159
mUPSOffLevelGets, sets or defaults the threshold of a UPS to set outlets off.rw
Utenth
.1.3.6.1.4.1.34097.9.77.1.1.10160
mMaxHighCurrentWarningGets sets or defaults the maximum high current warning level. (unit: 0.1A)rw
Stenth (-32768..32767) UNITS "A"
.1.3.6.1.4.1.34097.9.77.1.1.10165
mUpsMonitoringProtocolDisables/Enables UPS monitoring and selects the protocol used for UPS monitoring. 0 = Disabled; 1 = Use old APC protocolrw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10167
mUpsEmergencyThresholdWhen the UPS battery level goes below this threshold a shutdown request will be sent to all agents (unit: 0.1%)rw
Utenth
.1.3.6.1.4.1.34097.9.77.1.1.10168
mUpsRecoveryThresholdWhen the UPS battery level goes above this threshold a outlets will be powered on as configured by the user (unit: 0.1%)rw
Utenth
.1.3.6.1.4.1.34097.9.77.1.1.10169
mUpsEventFlagsEvent flags for events related to the UPS monitoringrw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.77.1.1.10170
mRecoveryPowerThresholdWhen the UPS was on battery and it went below UPSEMERGTHRES, the outlets that have a load below the RECOVPOWERTHRES will be power cycled once the UPS is back on mains power and exceeds UPSRECOVTHRES (unit: W)rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10171
mMinHighCurrentWarningGets sets or defaults the minimum high current warning level. (unit: 0.1A)rw
Stenth (-32768..32767) UNITS "A"
.1.3.6.1.4.1.34097.9.77.1.1.10176
mMinHighPowerWarningGets sets or defaults the power min high current warning level. (unit: 0.01kW)rw
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.77.1.1.10177
mMaxHighPowerWarningGets sets or defaults the power max high current warning level. (unit: 0.01kW)rw
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.77.1.1.10178
mHeartbeatIntervalInterval (in seconds) between 2 heartbeat SNMP traps, Set to 0 to disable (unit: s)rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10179
mMinTotalHighCurrentWarningGets sets or defaults the maximum high current warning level. (unit: 0.1A)rw
Stenth (-32768..32767) UNITS "A"
.1.3.6.1.4.1.34097.9.77.1.1.10180
mMaxTotalHighCurrentWarningGets sets or defaults the maximum high current warning level. (unit: 0.1A)rw
Stenth (-32768..32767) UNITS "A"
.1.3.6.1.4.1.34097.9.77.1.1.10181
mMinTotalHighPowerWarningGets sets or defaults the power min high current warning level. (unit: 0.01kW)rw
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.77.1.1.10182
mMaxTotalHighPowerWarningGets sets or defaults the power max high current warning level. (unit: 0.01kW)rw
Shundredth (-32768..32767) UNITS "kW"
.1.3.6.1.4.1.34097.9.77.1.1.10183
mCloudStateSet if the device needs to push info to the init cloud (val=0) or to the normal cloud (val=1)rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10208
mSensorBiasget or set the DC sensor bias (unit: mV)rw
Integer32 (-32768..32767) UNITS "mV"
.1.3.6.1.4.1.34097.9.77.1.1.10210
mDaisyChainDeviceModeallowed modes: 0: standalone (master without daisy chain slaves) 1: daisy chain master 2: daisy chain slave 1 3: daisy chain slave 2 4: daisy chain slave 3rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10211
mSNMPTrapUserGets, sets or defaults the SNMP tap user out of the user list.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10212
mUSMUserGets, sets or defaults the SNMP USM security userrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10213
mUSMAuthPassphraseGets, sets or defaults the SNMP USM authentication passphrase (Always MD5)rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10214
mUSMPrivPassphraseGets, sets or defaults the SNMP USM private passphrase (Always AES)rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10215
mSNMPV2GetSetEnableGets, sets or defaults the SNMP V2 Enable for get ,set or walk but not for traps.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10216
mSNMPV3GetSetEnableGets, sets or defaults the SNMP V3 Enable for get ,set or walk but not for traps.rw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10217
mUSMAuthPassphraseLengthGets, sets or defaults the SNMP USM authentication passphrase lengthrw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10218
mUSMPrivPassphraseLengthGets, sets or defaults the SNMP USM private passphrase lengthrw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10219
mSNMPTrapEnableGets, sets or defaults the SNMP Trap Enable per trap accountrw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10222
mLDAPAttributeAttribute linked to the LDAPFilterrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10227
mLDAPPathRelative Path to be used for the LDAPFilterrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10228
mLDAPAdminGroupNameGroupName for Admin Credentials in LDAPrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10229
mLDAPRestrictedGroupNameGroupName for Restricted Credentials in LDAPrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10230
mLDAPGuestGroupNameGroupName for Guest Credentials in LDAPrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10231
mLDAPEnableEnable or disable login via LDAP credentialsrw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10232
mLDAPLoginWrapperWrapper for login in with LDAPrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10233
mLDAPServerNO_INFOrw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.77.1.1.10235
mLocalAuthEnableSet if local authentication is still possible if LDAP is enabledrw
Unsigned32
.1.3.6.1.4.1.34097.9.77.1.1.10236
masterIndexIndex for the selected Master Module
Integer32
.1.3.6.1.4.1.34097.9.77.1.1.65537
masterModuleIndexSelected Master Module
Integer32
.1.3.6.1.4.1.34097.9.77.1.1.65538
powerModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.80
ePowerTableNO_INFO
SEQUENCE OF EPowerEntry
.1.3.6.1.4.1.34097.9.80.1
ePowerEntryNO_INFO
EPowerEntry
.1.3.6.1.4.1.34097.9.80.1.1
pGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.1
pSpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.2
pCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.80.1.1.3
pVoltageGets the voltage of a power module. (unit: 0.01V)ro
Uhundredth UNITS "V"
.1.3.6.1.4.1.34097.9.80.1.1.4
pFrequencyGets the frequency of the input voltage of a power module. (unit: 0.001Hz)ro
Uthousandth UNITS "Hz"
.1.3.6.1.4.1.34097.9.80.1.1.5
pCurrentGets the current of an outlet. (unit: 0.001A)ro
Uthousandth UNITS "A"
.1.3.6.1.4.1.34097.9.80.1.1.6
pPowerGets the power of an outlet. (unit: W)ro
Unsigned32 UNITS "W"
.1.3.6.1.4.1.34097.9.80.1.1.7
pStatePortCurGets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.ro
CURPORTSTATE
.1.3.6.1.4.1.34097.9.80.1.1.8
pActiveEnergyGets the energy used by an outlet. (unit: 0.001kWh)ro
Uthousandth UNITS "kWh"
.1.3.6.1.4.1.34097.9.80.1.1.9
pApparentEnergyGets the apparent energy used by an outlet. (unit: 0.001kVAh)ro
Uthousandth UNITS "kVAh"
.1.3.6.1.4.1.34097.9.80.1.1.10
pTemperatureGets the current temperature of a temperature sensor. (unit: 0.1K)ro
Utenth UNITS "K"
.1.3.6.1.4.1.34097.9.80.1.1.11
pApparentPowerGets the apparent power of an outlet. (unit: VA)ro
Unsigned32 UNITS "VA"
.1.3.6.1.4.1.34097.9.80.1.1.15
pPowerFactorGets the power factor of an outlet. (unit: %)ro
Unsigned32 UNITS "%"
.1.3.6.1.4.1.34097.9.80.1.1.16
pTotalCurrentGets the total current of a power module. (unit: 0.001A)ro
Uthousandth UNITS "A"
.1.3.6.1.4.1.34097.9.80.1.1.17
pTotalRealPowerGets the total power level of a power module. (unit: W)ro
Unsigned32 UNITS "W"
.1.3.6.1.4.1.34097.9.80.1.1.18
pTotalApparentPowerGets the total apparent power of a power module. (unit: VA)ro
Unsigned32 UNITS "VA"
.1.3.6.1.4.1.34097.9.80.1.1.19
pTotalActiveEnergyGets the total energy of a power module. (unit: 0.001kWh)ro
Uthousandth UNITS "kWh"
.1.3.6.1.4.1.34097.9.80.1.1.20
pTotalApparentEnergyGets the total apparent energy of a power module. (unit: 0.001kVAh)ro
Uthousandth UNITS "kVAh"
.1.3.6.1.4.1.34097.9.80.1.1.21
pTotalPowerFactorGets the total power factor of a power module. (unit: %)ro
Unsigned32 UNITS "%"
.1.3.6.1.4.1.34097.9.80.1.1.22
pTimeOnlineGets the amount of seconds since the last reset. (unit: s)ro
Unsigned32 UNITS "s"
.1.3.6.1.4.1.34097.9.80.1.1.24
pTotalHarmonicDistortiontotal harmonic distortion - outlet (unit: 0.1%)ro
Utenth
.1.3.6.1.4.1.34097.9.80.1.1.50
pPhasethe phase between 2 waves (unit: degr)ro
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.51
pBigCurrentGets the current of an outlet. (unit: 0.0001A)ro
Unsigned32 UNITS "A"
.1.3.6.1.4.1.34097.9.80.1.1.52
pBigPowerGets the power of an outlet. (unit: 0.001W)ro
Uthousandth UNITS "W"
.1.3.6.1.4.1.34097.9.80.1.1.53
pBigApparentPowerGets the apparent power of an outlet. (unit: 0.001VA)ro
Uthousandth UNITS "VA"
.1.3.6.1.4.1.34097.9.80.1.1.54
pDetectedPhaseGives the best matching Phase per currentsensor. Updated every 8s. returnes 255 if no good phaselink is foundro
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.55
pModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.80.1.1.10001
pFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.80.1.1.10002
pHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.80.1.1.10003
pFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.80.1.1.10004
pHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.80.1.1.10005
pPortNameGets, sets or defaults the name of an outlet.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.80.1.1.10034
pPortStateSets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10035
pCurrentPriorOffGets, sets or defaults the priority of an outlet. Priority settings are used when 1 or more outlets must be turned off because the total current of a power module was exceeded.rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10036
pDelayOnGets, sets or defaults the outlet turn-on delay. Use this to reduce inrush current when the Energy Switch boots. (unit: s)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10037
pMaxCurrentOffGets, sets or defaults the maximum current off level of an outlet. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.80.1.1.10038
pMaxCurrentWarningGets, sets or defaults the maximum current warning level of an outlet. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.80.1.1.10039
pMaxPowerOffGets, sets or defaults the maximum power off level of an outlet. (unit: W)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10040
pMaxPowerWarningGets, sets or defaults the maximum power warning level of an outlet. (unit: W)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10041
pMaxTotalCurrentOffGets, sets or defaults the total maximum current off level of a power module. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.80.1.1.10042
pMaxTotalCurrentWarningGets, sets or defaults the total maximum current warning level of a power module. (unit: 0.001A)rw
Uthousandth
.1.3.6.1.4.1.34097.9.80.1.1.10043
pMaxTotalPowerOffGets, sets or defaults the maximum total power off level. (unit: W)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10044
pMaxTotalPowerWarningGets, sets or defaults the maximum total power warning level. (unit: W)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10045
pMaxVoltageWarningGets, sets or defaults the maximum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.80.1.1.10047
pMinVoltageWarningGets, sets or defaults the minimum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.80.1.1.10049
pMinTemperatureWarningGets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.80.1.1.10052
pMaxTemperatureWarningGets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.80.1.1.10053
pPortStateEventEnables or disables the SNMP trap if the state of an outlet is changed.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10076
pCurrentOffEventEnables or disables the SNMP trap if the outlet current off level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10077
pCurrentWarningEventEnables or disables the SNMP trap if the outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10078
pPowerOffEventEnables or disables the SNMP trap if the power off level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10079
pPowerWarningEventEnables or disables the SNMP trap if the power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10080
pTotalCurrentOffEventEnables or disables the SNMP trap if the total outlet current off level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10081
pTotalCurrentWarningEventEnables or disables the SNMP trap if the total outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10082
pTotalPowerOffEventEnables or disables the SNMP trap if the total power off level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10083
pTotalPowerWarningEventEnables or disables the SNMP trap if the total power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10084
pVoltageWarningEventEnables or disables the SNMP trap if the voltage warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10086
pTemperatureWarningEventEnables or disables the SNMP trap if the temperature warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10087
pMaxOverheatingOffGets, sets or defaults the maximum overheat temperature off level. (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.80.1.1.10090
pOverheatingOffEventEnables or disables the SNMP trap if the overtemperature off level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10091
pPowerCycleTimeGets, sets or defaults the time interval that is used to do a power cycle of an outlet. (unit: s)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10099
pExternalSensorLabelGets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.80.1.1.10109
pMaxOverheatingWarningGets, sets or defaults the overheating temperature warning level. (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.80.1.1.10121
pOverheatingWarningEventEnables or disables the SNMP trap if the overheat warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10122
pMicroIntTimeThresholdThe minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)rw
Utenth
.1.3.6.1.4.1.34097.9.80.1.1.10135
pMicroIntEventEnables or disables the SNMP trap if a microinterruption on the voltage is detected.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10136
pSoftFuseCurrentThresholdThe threshold of the soft fuse is a factor of the maximum nominal current off (unit: A)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10137
pSoftFuseDelayThe minimum time the current of an outlet must be above the soft fuse current threshold to switch it off. (unit: ms)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10138
pSoftFuseEventEnables or disables the SNMP trap if a soft fuse is triggered.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10139
pPhaseShiftEventEnables or disables the SNMP trap if a phase shift on the voltage is detected.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10140
pSchedulePortOnTimeGets, sets or defaults the time for the scheduler to turn on an outlet. (unit: min)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10146
pSchedulePortOffTimeGets, sets or defaults the time for the scheduler to turn off an outlet. (unit: min)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10147
pEnableSchedulePortEnables or disables the scheduler on an outlet. When enabled the scheduling is repeated daily.rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10148
pBlockSetPortOffPrevent outlets to be set off (only delay on and powercycle are still possible).rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10161
pSchedulePortChangeEventevent if a port has changed state because of the schedulerrw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10166
pAgentIPIP address of the agent associated to this outletrw
IpAddress
.1.3.6.1.4.1.34097.9.80.1.1.10172
pAgentPortNetwork port on which the associated agent will listenrw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10173
pAgentCommunicationEventFlagsEvent flags for events related to agent communicationrw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.80.1.1.10174
pAlwaysOnOutlets marked as Always On can only be power cycled by the userrw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10175
pGenericTransducerParameterssets the slope of the transducer transfer function when the generic transducer type is selected (unit: mA/V)rw
Integer32
.1.3.6.1.4.1.34097.9.80.1.1.10190
pMaxBigCurrentWarningGets, sets or defaults the maximum current warning level of an outlet. (unit: 0.0001A)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10193
pMaxBigPowerWarningGets, sets or defaults the maximum power warning level of an outlet. (unit: 0.001W)rw
Uthousandth
.1.3.6.1.4.1.34097.9.80.1.1.10194
pGroupNumberGroup number per port to group portsrw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10195
pCurrentSensorSelectorSelection of the currentsensor connected to port. To enter your own value you need to use 255 and fill in guid 10190.rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10197
pMinBigCurrentWarningGets, sets or defaults the minimum current warning level of a port. (unit: 0.0001A)rw
Unsigned32
.1.3.6.1.4.1.34097.9.80.1.1.10209
powerIndexIndex for the selected Power Module
Integer32
.1.3.6.1.4.1.34097.9.80.1.1.65537
powerModuleIndexSelected Power Module
Integer32
.1.3.6.1.4.1.34097.9.80.1.1.65538
measuring3phaseModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.81
eMeasuring3PhaseTableNO_INFO
SEQUENCE OF EMeasuring3PhaseEntry
.1.3.6.1.4.1.34097.9.81.1
eMeasuring3PhaseEntryNO_INFO
EMeasuring3PhaseEntry
.1.3.6.1.4.1.34097.9.81.1.1
qGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.1
qSpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.2
qCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.81.1.1.3
qVoltageGets the voltage of a power module. (unit: 0.01V)ro
Uhundredth UNITS "V"
.1.3.6.1.4.1.34097.9.81.1.1.4
qFrequencyGets the frequency of the input voltage of a power module. (unit: 0.001Hz)ro
Uthousandth UNITS "Hz"
.1.3.6.1.4.1.34097.9.81.1.1.5
qActiveEnergyGets the energy used by an outlet. (unit: 0.001kWh)ro
Uthousandth UNITS "kWh"
.1.3.6.1.4.1.34097.9.81.1.1.9
qApparentEnergyGets the apparent energy used by an outlet. (unit: 0.001kVAh)ro
Uthousandth UNITS "kVAh"
.1.3.6.1.4.1.34097.9.81.1.1.10
qTemperatureGets the current temperature of a temperature sensor. (unit: 0.1K)ro
Utenth UNITS "K"
.1.3.6.1.4.1.34097.9.81.1.1.11
qPowerFactorGets the power factor of an outlet. (unit: %)ro
Unsigned32 UNITS "%"
.1.3.6.1.4.1.34097.9.81.1.1.16
qTimeOnlineGets the amount of seconds since the last reset. (unit: s)ro
Unsigned32 UNITS "s"
.1.3.6.1.4.1.34097.9.81.1.1.24
qIOPortGets the state of a digital input.ro
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.30
qTotalHarmonicDistortiontotal harmonic distortion - outlet (unit: 0.1%)ro
Utenth
.1.3.6.1.4.1.34097.9.81.1.1.50
qPhasethe phase between 2 waves (unit: degr)ro
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.51
qBigCurrentGets the current of an outlet. (unit: 0.0001A)ro
Unsigned32 UNITS "A"
.1.3.6.1.4.1.34097.9.81.1.1.52
qBigPowerGets the power of an outlet. (unit: 0.001W)ro
Uthousandth UNITS "W"
.1.3.6.1.4.1.34097.9.81.1.1.53
qBigApparentPowerGets the apparent power of an outlet. (unit: 0.001VA)ro
Uthousandth UNITS "VA"
.1.3.6.1.4.1.34097.9.81.1.1.54
qStatusstatus of a modulero
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.1000
qModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.81.1.1.10001
qFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.81.1.1.10002
qHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.81.1.1.10003
qFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.81.1.1.10004
qHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.81.1.1.10005
qPortStateSets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.rw
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.10035
qMaxVoltageWarningGets, sets or defaults the maximum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.81.1.1.10047
qMinVoltageWarningGets, sets or defaults the minimum voltage warning level. (unit: 0.01V)rw
Uhundredth
.1.3.6.1.4.1.34097.9.81.1.1.10049
qMinTemperatureWarningGets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.81.1.1.10052
qMaxTemperatureWarningGets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)rw
Utenth
.1.3.6.1.4.1.34097.9.81.1.1.10053
qPortStateEventEnables or disables the SNMP trap if the state of an outlet is changed.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.81.1.1.10076
qCurrentWarningEventEnables or disables the SNMP trap if the outlet current warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.81.1.1.10078
qPowerWarningEventEnables or disables the SNMP trap if the power warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.81.1.1.10080
qVoltageWarningEventEnables or disables the SNMP trap if the voltage warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.81.1.1.10086
qTemperatureWarningEventEnables or disables the SNMP trap if the temperature warning level is exceeded.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.81.1.1.10087
qMicroIntTimeThresholdThe minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)rw
Utenth
.1.3.6.1.4.1.34097.9.81.1.1.10135
qMicroIntEventEnables or disables the SNMP trap if a microinterruption on the voltage is detected.rw
EVENTFLAGS
.1.3.6.1.4.1.34097.9.81.1.1.10136
qDeviceIDThe ID of the device.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.81.1.1.10150
qDeviceVersionThe version of the device.ro
Version
.1.3.6.1.4.1.34097.9.81.1.1.10151
qMaxBigCurrentWarningGets, sets or defaults the maximum current warning level of an outlet. (unit: 0.0001A)rw
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.10193
qMaxBigPowerWarningGets, sets or defaults the maximum power warning level of an outlet. (unit: 0.001W)rw
Uthousandth
.1.3.6.1.4.1.34097.9.81.1.1.10194
qCurrentSensorSelectorSelection of the currentsensor connected to port. To enter your own value you need to use 255 and fill in guid 10190.rw
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.10197
qMinBigCurrentWarningGets, sets or defaults the minimum current warning level of a port. (unit: 0.0001A)rw
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.10209
qkWhModeSet the mode when to count kWh, 0 = always, 1 = only positive, 2= only negativerw
Unsigned32
.1.3.6.1.4.1.34097.9.81.1.1.10234
measuring3phaseIndexIndex for the selected Measuring3Phase Module
Integer32
.1.3.6.1.4.1.34097.9.81.1.1.65537
measuring3phaseModuleIndexSelected Measuring3Phase Module
Integer32
.1.3.6.1.4.1.34097.9.81.1.1.65538
pcModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.85
ePCTableNO_INFO
SEQUENCE OF EPCEntry
.1.3.6.1.4.1.34097.9.85.1
ePCEntryNO_INFO
EPCEntry
.1.3.6.1.4.1.34097.9.85.1.1
uGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.85.1.1.1
uSpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.85.1.1.2
uCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.85.1.1.3
uVoltageGets the voltage of a power module. (unit: 0.01V)ro
Uhundredth
.1.3.6.1.4.1.34097.9.85.1.1.4
uCurrentGets the current of an outlet. (unit: 0.001A)ro
Uthousandth
.1.3.6.1.4.1.34097.9.85.1.1.6
uStatePortCurGets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.ro
CURPORTSTATE
.1.3.6.1.4.1.34097.9.85.1.1.8
uTemperatureGets the current temperature of a temperature sensor. (unit: 0.1K)ro
Utenth
.1.3.6.1.4.1.34097.9.85.1.1.11
uHumidityGets the relative humidity. (unit: 0.1RH)ro
Utenth
.1.3.6.1.4.1.34097.9.85.1.1.12
uModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.85.1.1.10001
uFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.85.1.1.10002
uHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.85.1.1.10003
uFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.85.1.1.10004
uHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.85.1.1.10005
uPortStateSets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.rw
Unsigned32
.1.3.6.1.4.1.34097.9.85.1.1.10035
pcIndexIndex for the selected PC Module
Integer32
.1.3.6.1.4.1.34097.9.85.1.1.65537
pcModuleIndexSelected PC Module
Integer32
.1.3.6.1.4.1.34097.9.85.1.1.65538
testmoduleModule
OBJECT IDENTIFIER
.1.3.6.1.4.1.34097.9.89
eTestModuleTableModule to test the R-bus
SEQUENCE OF ETestModuleEntry
.1.3.6.1.4.1.34097.9.89.1
eTestModuleEntryModule to test the R-bus
ETestModuleEntry
.1.3.6.1.4.1.34097.9.89.1.1
yGeneralModuleStatusGeneral status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.89.1.1.1
ySpecificModuleStatusSpecific status of a module.ro
Unsigned32
.1.3.6.1.4.1.34097.9.89.1.1.2
yCurrentTimeGets or sets the current time (not possible when NTP is enabled). (unit: UNIX)rw
TimeTicks UNITS "UNIX"
.1.3.6.1.4.1.34097.9.89.1.1.3
yCurrentGets the current of an outlet. (unit: 0.001A)ro
Uthousandth UNITS "A"
.1.3.6.1.4.1.34097.9.89.1.1.6
yStatePortCurGets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.ro
CURPORTSTATE
.1.3.6.1.4.1.34097.9.89.1.1.8
yAnalogueInputGets the value of an analog input (voltage). (unit: mV)ro
Unsigned32 UNITS "mV"
.1.3.6.1.4.1.34097.9.89.1.1.27
yModuleNameGets, sets or defaults the module name.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.89.1.1.10001
yFirmwareVersionGets the version of the module's firmware.ro
Version
.1.3.6.1.4.1.34097.9.89.1.1.10002
yHardwareVersionGets the version of a module's hardware.ro
Version
.1.3.6.1.4.1.34097.9.89.1.1.10003
yFirmwareIDGets the ID of the module's firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.89.1.1.10004
yHardwareIDGets the ID of a module's hardware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.34097.9.89.1.1.10005
testmoduleIndexIndex for the selected TestModule Module
Integer32
.1.3.6.1.4.1.34097.9.89.1.1.65537
testmoduleModuleIndexSelected TestModule Module
Integer32
.1.3.6.1.4.1.34097.9.89.1.1.65538
ES-RACKTIVITY-MIB - SNMP MIB Reference | MIBs Explorer