ELTEX-ULD-MIB
The ELTEX-ULD-MIB module enables monitoring of unidirectional link detection (ULD) states and link status anomalies on ELTEX network switches to identify and isolate asymmetric connectivity failures. It exposes specific metrics for ULD interface status, detection timers, and fault counters to facilitate rapid troubleshooting of one-way traffic conditions.
Imported Objects
Objects
12 total| Object Name |
|---|
eltexULDMIBThe unidirectioanl link detection module MIB. MODULE-IDENTITY .1.3.6.1.4.1.35265.34 |
eltexULDNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.35265.34.0 |
eltexULDLinkStatusChangedA eltexULDLinkStatusChanged notification is sent when a local link status has been changed. This event should not be sent more then one per second. NOTIFICATION-TYPE .1.3.6.1.4.1.35265.34.0.1 |
eltexULDMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.35265.34.1 |
eltexULDTableThe management information of the unidirectional link detection. SEQUENCE OF EltexULDEntry .1.3.6.1.4.1.35265.34.1.1 |
eltexULDEntryA list of information contained in eltexULDTable. EltexULDEntry .1.3.6.1.4.1.35265.34.1.1.1 |
eltexULDAdminStateThis object indicates the unidirectional link detection configuration status.rw Enumeration .1.3.6.1.4.1.35265.34.1.1.1.1 |
eltexULDOperStatusThis object is determined by local and remote port supporting OAM and unidirectional detection. If both local and remote port support OAM and unidirectional detection, it is enabled(1),else it is disabled(2).ro Enumeration .1.3.6.1.4.1.35265.34.1.1.1.2 |
eltexULDModeThis object indicates the mode for unidirectional link detection. shutdown: if any unidirectional link is detected, disable the port and log an event. normal: only log an event when a unidirectional link is detected.rw Enumeration .1.3.6.1.4.1.35265.34.1.1.1.3 |
eltexULDDiscoveryTimeThis object indicates the neighbor discovery time for unidirectional link detection. If the discovery time ends, the unidirectional link detection starts.rw INTEGER .1.3.6.1.4.1.35265.34.1.1.1.4 |
eltexULDIsAggressiveThis object indicates the mode for unidirectional link detection protocol. If true then port is considered to be UNIDIRECTIONAL if there is no answer from remote side during discovery timeout. If false then port is considered to be UNKNOWN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.35265.34.1.1.1.5 |
eltexULDLinkStatusThis object indicates the link status, which is a result of unidirectional link detection.ro Enumeration .1.3.6.1.4.1.35265.34.1.1.1.6 |
More MIBs from Eltex Enterprise
Browse all Eltex EnterpriseMIBs →The ELTEX-LTE8ST MIB module provides SNMP-based monitoring and management capabilities for ELTEX LTE-8ST cellular routers, exposing critical operational metrics such as cellular interface status, signal strength (RSRP/RSRQ), network registration states, and active data session statistics.
SNMP MIB module
SNMP MIB module
SNMP MIB module
SNMP MIB module
The ELTEX-SMI-ACTUAL module provides the foundational Structure of Management Information (SMI) definitions for Eltex Networks hardware, enabling the monitoring of device-specific operational metrics such as interface statistics, system resources, and environmental sensors via SNMP. It serves as the core schema required for network management systems to interpret and collect telemetry data from Eltex switches, routers, and access points.