ELTEX-PHY-MIB

AI MIB Summary

The ELTEX-PHY-MIB module enables monitoring and management of Layer 1 physical interface parameters and optical diagnostics on ELTEX networking hardware. It facilitates remote L1 testing and fault isolation by exposing metrics such as signal attenuation, optical power levels, and transceiver status for Ethernet and fiber interfaces.

The MIB module describes the private MIB for L1 testing.

Main OID:

eltexPhyMIB.1.3.6.1.4.1.35265.52

Objects

Active

Status

Dependencies

Imported Objects

Objects

41 total

Object Name	Syntax	OID
eltexPhyMIBThe MIB module describes the private MIB for L1 testing. MODULE-IDENTITY `.1.3.6.1.4.1.35265.52`	MODULE-IDENTITY	`.1.3.6.1.4.1.35265.52`
eltexPhyObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.35265.52.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.35265.52.1`
eltexPhyTransceiverObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.35265.52.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.35265.52.1.1`
eltexPhyTransceiverGlobals OBJECT IDENTIFIER `.1.3.6.1.4.1.35265.52.1.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.35265.52.1.1.1`
eltexPhyTransceiverConfigs OBJECT IDENTIFIER `.1.3.6.1.4.1.35265.52.1.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.35265.52.1.1.2`
eltexPhyTransceiverStatistics OBJECT IDENTIFIER `.1.3.6.1.4.1.35265.52.1.1.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.35265.52.1.1.3`
eltexPhyTransceiverInfoTableThis table show the information of interfaces transceivers. SEQUENCE OF EltexPhyTransceiverInfoEntry `.1.3.6.1.4.1.35265.52.1.1.3.1`	SEQUENCE OF EltexPhyTransceiverInfoEntry	`.1.3.6.1.4.1.35265.52.1.1.3.1`
eltexPhyTransceiverInfoEntryThe entry of the eltexPhyTransceiverInfoTable. EltexPhyTransceiverInfoEntry `.1.3.6.1.4.1.35265.52.1.1.3.1.1`	EltexPhyTransceiverInfoEntry	`.1.3.6.1.4.1.35265.52.1.1.3.1.1`
eltexPhyTransceiverInfoConnectorTypeConnector type of the interface transceiver.ro EltexPhyTransConnectorType `.1.3.6.1.4.1.35265.52.1.1.3.1.1.1`	EltexPhyTransConnectorType	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.1`
eltexPhyTransceiverInfoTypeType of the interface transceiver.ro EltexPhyTransType `.1.3.6.1.4.1.35265.52.1.1.3.1.1.2`	EltexPhyTransType	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.2`
eltexPhyTransceiverInfoComplianceCodeCompliance code of the interface transceiver.ro OCTET STRING `.1.3.6.1.4.1.35265.52.1.1.3.1.1.3`	OCTET STRING	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.3`
eltexPhyTransceiverInfoWaveLengthWave length of the interface transceiver, measured in nanometer.ro Integer32 `.1.3.6.1.4.1.35265.52.1.1.3.1.1.4`	Integer32	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.4`
eltexPhyTransceiverInfoVendorNameVendor name of the interface transceiver.ro OCTET STRING `.1.3.6.1.4.1.35265.52.1.1.3.1.1.5`	OCTET STRING	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.5`
eltexPhyTransceiverInfoSerialNumberSerial number of the interface transceiver.ro OCTET STRING `.1.3.6.1.4.1.35265.52.1.1.3.1.1.6`	OCTET STRING	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.6`
eltexPhyTransceiverInfoFiberDiameterFiber diameter of the interface transceiver.ro EltexPhyTransFiberDiameter `.1.3.6.1.4.1.35265.52.1.1.3.1.1.7`	EltexPhyTransFiberDiameter	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.7`
eltexPhyTransceiverInfoTransferDistanceThe maximal distance which the interface transceiver could transmit, measured in meter.ro Integer32 `.1.3.6.1.4.1.35265.52.1.1.3.1.1.8`	Integer32	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.8`
eltexPhyTransceiverInfoDiagnosticSupportedIndicating whether the digital diagnostic monitoring function is supported or not on the interface transceiver.ro TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.35265.52.1.1.3.1.1.9`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.9`
eltexPhyTransceiverInfoPartNumberPart number of the interface transceiver provided by SFP vendor.ro OCTET STRING `.1.3.6.1.4.1.35265.52.1.1.3.1.1.10`	OCTET STRING	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.10`
eltexPhyTransceiverInfoVendorRevisionRevision level for part number provided by vendor.ro OCTET STRING `.1.3.6.1.4.1.35265.52.1.1.3.1.1.11`	OCTET STRING	`.1.3.6.1.4.1.35265.52.1.1.3.1.1.11`
eltexPhyTransceiverDiagnosticTableThis table show current DDM values and thresholds of the interface transceiver. SEQUENCE OF EltexPhyTransceiverDiagnosticEntry `.1.3.6.1.4.1.35265.52.1.1.3.2`	SEQUENCE OF EltexPhyTransceiverDiagnosticEntry	`.1.3.6.1.4.1.35265.52.1.1.3.2`
eltexPhyTransceiverDiagnosticEntryThe entry of the eltexPhyTransceiverDiagnosticTable. EltexPhyTransceiverDiagnosticEntry `.1.3.6.1.4.1.35265.52.1.1.3.2.1`	EltexPhyTransceiverDiagnosticEntry	`.1.3.6.1.4.1.35265.52.1.1.3.2.1`
eltexPhyTransceiverDiagnosticTypeType of the transceiver diagnostic. EltexPhyTransDiagnosticType `.1.3.6.1.4.1.35265.52.1.1.3.2.1.1`	EltexPhyTransDiagnosticType	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.1`
eltexPhyTransceiverDiagnosticChannelTransceiver channel number. INTEGER `.1.3.6.1.4.1.35265.52.1.1.3.2.1.2`	INTEGER	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.2`
eltexPhyTransceiverDiagnosticUnitsUnit of measure for current diagnostic type.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.35265.52.1.1.3.2.1.3`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.3`
eltexPhyTransceiverDiagnosticHighAlarmThresholdTransceiver HighAlarm threshold for current diagnostic type.ro INTEGER `.1.3.6.1.4.1.35265.52.1.1.3.2.1.4`	INTEGER	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.4`
eltexPhyTransceiverDiagnosticHighWarningThresholdTransceiver HighWarning threshold for current diagnostic type.ro INTEGER `.1.3.6.1.4.1.35265.52.1.1.3.2.1.5`	INTEGER	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.5`
eltexPhyTransceiverDiagnosticLowWarningThresholdTransceiver LowWarning threshold for current diagnostic type.ro INTEGER `.1.3.6.1.4.1.35265.52.1.1.3.2.1.6`	INTEGER	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.6`
eltexPhyTransceiverDiagnosticLowAlarmThresholdTransceiver LowAlarm threshold for current diagnostic type.ro INTEGER `.1.3.6.1.4.1.35265.52.1.1.3.2.1.7`	INTEGER	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.7`
eltexPhyTransceiverDiagnosticCurrentValueMeasured value for current transceiver diagnostic type.ro INTEGER `.1.3.6.1.4.1.35265.52.1.1.3.2.1.8`	INTEGER	`.1.3.6.1.4.1.35265.52.1.1.3.2.1.8`
eltexPhyTestObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.35265.52.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.35265.52.1.2`
eltexPhyTestGlobals OBJECT IDENTIFIER `.1.3.6.1.4.1.35265.52.1.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.35265.52.1.2.1`
eltexPhyTestSetTableA table containing objects for invoking tests on an interface. SEQUENCE OF EltexPhyTestSetEntry `.1.3.6.1.4.1.35265.52.1.2.1.1`	SEQUENCE OF EltexPhyTestSetEntry	`.1.3.6.1.4.1.35265.52.1.2.1.1`
eltexPhyTestSetEntryAn entry containing objects for invoking tests on an interface. EltexPhyTestSetEntry `.1.3.6.1.4.1.35265.52.1.2.1.1.1`	EltexPhyTestSetEntry	`.1.3.6.1.4.1.35265.52.1.2.1.1.1`
eltexPhyTestSetTypeA control variable used to start operator initiated interface tests.rw EltexPhyTestSetType `.1.3.6.1.4.1.35265.52.1.2.1.1.1.1`	EltexPhyTestSetType	`.1.3.6.1.4.1.35265.52.1.2.1.1.1.1`
eltexPhyTestGetTableA table containing results of tests on an interface. SEQUENCE OF EltexPhyTestGetEntry `.1.3.6.1.4.1.35265.52.1.2.1.2`	SEQUENCE OF EltexPhyTestGetEntry	`.1.3.6.1.4.1.35265.52.1.2.1.2`
eltexPhyTestGetEntryAn entry containing results of tests on an interface. EltexPhyTestGetEntry `.1.3.6.1.4.1.35265.52.1.2.1.2.1`	EltexPhyTestGetEntry	`.1.3.6.1.4.1.35265.52.1.2.1.2.1`
eltexPhyTestGetTypeThe type of test the user performed. EltexPhyTestGetType `.1.3.6.1.4.1.35265.52.1.2.1.2.1.1`	EltexPhyTestGetType	`.1.3.6.1.4.1.35265.52.1.2.1.2.1.1`
eltexPhyTestGetStatusThis object contains the status of the most recently requested test for operator initiated tests or the value none(1) if no tests have been requested since the last reset. For non operator initiated tests the value is always none(1). Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.ro EltexPhyTestGetStatus `.1.3.6.1.4.1.35265.52.1.2.1.2.1.2`	EltexPhyTestGetStatus	`.1.3.6.1.4.1.35265.52.1.2.1.2.1.2`
eltexPhyTestGetResultThis object holds the test resultro INTEGER `.1.3.6.1.4.1.35265.52.1.2.1.2.1.3`	INTEGER	`.1.3.6.1.4.1.35265.52.1.2.1.2.1.3`
eltexPhyTestGetUnitsThe test result unit of measure. The units can be standard unit or special units that are designed for special test.ro EltexPhyTestGetUnits `.1.3.6.1.4.1.35265.52.1.2.1.2.1.4`	EltexPhyTestGetUnits	`.1.3.6.1.4.1.35265.52.1.2.1.2.1.4`
eltexPhyTestGetTimeStampThe time in string (formated DD-MMM-YYYY HH:MM:SS e.g 14-Apr-2002 10:33:31)ro DisplayString `.1.3.6.1.4.1.35265.52.1.2.1.2.1.5`	DisplayString	`.1.3.6.1.4.1.35265.52.1.2.1.2.1.5`