ELTEX-MES-ULD-MIB
The ELTEX-MES-ULD-MIB module enables monitoring and management of unidirectional link detection (ULD) states and link integrity metrics on ELTEX MES series Ethernet switches. It facilitates the detection of asymmetric traffic paths by exposing operational status indicators for ULD sessions and associated link failure conditions.
Imported Objects
Objects
12 total| Object Name |
|---|
eltMesULDMIBThe unidirectioanl link detection module MIB. MODULE-IDENTITY .1.3.6.1.4.1.35265.1.23.1.87 |
eltMesULDNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.1.87.0 |
eltULDLinkStatusChangedA eltULDLinkStatusChanged notification is sent when a local link status has been changed. This event should not be sent more then one per second.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.35265.1.23.1.87.0.1 |
eltMesULDMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.1.87.1 |
eltULDTableThe management information of the unidirectional link detection.deprecated SEQUENCE OF EltULDEntry .1.3.6.1.4.1.35265.1.23.1.87.1.1 |
eltULDEntryA list of information contained in eltULDTable.deprecated EltULDEntry .1.3.6.1.4.1.35265.1.23.1.87.1.1.1 |
eltULDAdminStateThis object indicates the unidirectional link detection configuration status.rwdeprecated Enumeration .1.3.6.1.4.1.35265.1.23.1.87.1.1.1.1 |
eltULDOperStatusThis object is determined by local and remote port supporting OAM and unidirectional detection. If both local and remote port support OAM and unidirectional detection, it is enabled(1),else it is disabled(2).rodeprecated Enumeration .1.3.6.1.4.1.35265.1.23.1.87.1.1.1.2 |
eltULDModeThis object indicates the mode for unidirectional link detection. shutdown: if any unidirectional link is detected, disable the port and log an event. normal: only log an event when a unidirectional link is detected.rwdeprecated Enumeration .1.3.6.1.4.1.35265.1.23.1.87.1.1.1.3 |
eltULDDiscoveryTimeThis object indicates the neighbor discovery time for unidirectional link detection. If the discovery time ends, the unidirectional link detection starts.rwdeprecated INTEGER .1.3.6.1.4.1.35265.1.23.1.87.1.1.1.4 |
eltULDIsAggressiveThis object indicates the mode for unidirectional link detection protocol. If true then port is considered to be UNIDIRECTIONAL if there is no answer from remote side during discovery timeout. If false then port is considered to be UNKNOWN.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.35265.1.23.1.87.1.1.1.5 |
eltULDLinkStatusThis object indicates the link status, which is a result of unidirectional link detection.rodeprecated Enumeration .1.3.6.1.4.1.35265.1.23.1.87.1.1.1.6 |
More MIBs from Eltex Enterprise
Browse all Eltex EnterpriseMIBs →The ELTEX-LTE8ST MIB module provides SNMP-based monitoring and management capabilities for ELTEX LTE-8ST cellular routers, exposing critical operational metrics such as cellular interface status, signal strength (RSRP/RSRQ), network registration states, and active data session statistics.
SNMP MIB module
SNMP MIB module
SNMP MIB module
SNMP MIB module
The ELTEX-SMI-ACTUAL module provides the foundational Structure of Management Information (SMI) definitions for Eltex Networks hardware, enabling the monitoring of device-specific operational metrics such as interface statistics, system resources, and environmental sensors via SNMP. It serves as the core schema required for network management systems to interpret and collect telemetry data from Eltex switches, routers, and access points.