ELTEX-MES-TRAPS-MIB
The ELTEX-MES-TRAPS-MIB module defines vendor-specific SNMP notifications for Eltex MES series network equipment, enabling the generation of asynchronous alerts for critical operational events such as interface state changes, hardware failures, and system status anomalies. These private traps facilitate real-time fault detection and event correlation within network management systems without requiring active polling of the managed devices.
Imported Objects
Objects
6 total| Object Name |
|---|
eltMesNotificationsThis private MIB module defines Eltex's private notifications MODULE-IDENTITY .1.3.6.1.4.1.35265.1.23.0 |
IMPORTSThis private MIB module defines Eltex's private notifications NOTIFICATION-TYPE .1.3.6.1.4.1.35265.1.23.0 |
i2cBusFailureAn I2C bus malfunction detected. It means that a lot of I2C bus I/O
transactions was completed unsuccessfully before and repairing efforts
were vain. It is a critical event, all I2C-controllable HW nodes are
unaccessible now. NOTIFICATION-TYPE .1.3.6.1.4.1.35265.1.23.0.3 |
i2cBusOperationalAn I2C bus is now operational. Appearance of this trap means that bus
operation was stick before and is repaired now. NOTIFICATION-TYPE .1.3.6.1.4.1.35265.1.23.0.4 |
transThresholdWarningParticular value of temperature, voltage, current, output power or
input power is outside of normal limits.
Alarm indicates conditions associated with an in-operational link.
Warning indicates conditions outside normally guaranteed bounds,
but not necessary causes link failures NOTIFICATION-TYPE .1.3.6.1.4.1.35265.1.23.0.5 |
transThresholdOKParticular value of temperature, voltage, current, output power or
input power is inside of normal limits. NOTIFICATION-TYPE .1.3.6.1.4.1.35265.1.23.0.6 |
More MIBs from Eltex Enterprise
Browse all Eltex EnterpriseMIBs →The ELTEX-LTE8ST MIB module provides SNMP-based monitoring and management capabilities for ELTEX LTE-8ST cellular routers, exposing critical operational metrics such as cellular interface status, signal strength (RSRP/RSRQ), network registration states, and active data session statistics.
SNMP MIB module
SNMP MIB module
SNMP MIB module
SNMP MIB module
The ELTEX-SMI-ACTUAL module provides the foundational Structure of Management Information (SMI) definitions for Eltex Networks hardware, enabling the monitoring of device-specific operational metrics such as interface statistics, system resources, and environmental sensors via SNMP. It serves as the core schema required for network management systems to interpret and collect telemetry data from Eltex switches, routers, and access points.