EKINOPS-MGNT2-MIB
AI MIB Summary
The EKINOPS-MGNT2-MIB facilitates SNMP-based management of Ekinops 360 optical transport platforms, enabling the monitoring of interface status, optical power levels, and system health metrics specific to their wavelength division multiplexing (WDM) infrastructure.
MIB for Ekinops 360 management.
Main OID:
mgnt2.1.3.6.1.4.1.20044.7
338
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
338 total| Object Name |
|---|
mgnt2MIB for Ekinops 360 management. MODULE-IDENTITY .1.3.6.1.4.1.20044.7 |
mgnt2SNMPAgentData OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1 |
mgnt2IPmanagment OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1.1 |
mgnt2GigmManagerIpAddressTableManager IP address Table. SEQUENCE OF Mgnt2GigmManagerIpAddressEntry .1.3.6.1.4.1.20044.7.1.1.1 |
mgnt2GigmManagerIpAddressEntry Mgnt2GigmManagerIpAddressEntry .1.3.6.1.4.1.20044.7.1.1.1.1 |
mgnt2GigmManagerIpIndexIndex of the IP address of the managerrw Integer32 .1.3.6.1.4.1.20044.7.1.1.1.1.1 |
mgnt2GigmManagerIpAddressIP address of the manager:This OID defines the IP address of the SNMP Manager attached to the Mgnt2rw IpAddress .1.3.6.1.4.1.20044.7.1.1.1.1.2 |
mgnt2GigmManagerIpAddressTableRowStatusThe status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.1.1.1.3 |
mgnt2GigmManagerTrapPortManager UDP port.rw Integer32 .1.3.6.1.4.1.20044.7.1.1.1.1.4 |
mgnt2GigmManagerEnableCtrlEnabling trap of Ctrl.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.5 |
mgnt2GigmManagerEnableConfigEnabling trap of config.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.6 |
mgnt2GigmManagerEnableEventEnabling trap of event.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.7 |
mgnt2GigmManagerEnableAlarmCritEnabling trap of crit alarm.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.8 |
mgnt2GigmManagerEnableAlarmMajorEnabling trap of major alarm.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.9 |
mgnt2GigmManagerEnableAlarmMinorEnabling trap of minor alarm.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.10 |
mgnt2GigmManagerRegistrationTimeoutTime-out for manager activities.rw Integer32 .1.3.6.1.4.1.20044.7.1.1.1.1.11 |
mgnt2GigmManagerEnableAlarmWarningEnabling trap of warning alarm.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.12 |
mgnt2GigmManagerEnableAlarmIndeterminateEnabling trap of indeterminate alarm.rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.1.1.13 |
mgnt2GigmBoardIpAddressIP address of the Chassis:This OID defines the IP address of the Mgnt2rw IpAddress .1.3.6.1.4.1.20044.7.1.1.2 |
mgnt2GigmIPAddresByDHCPIP address retrieved by DHCP:If enabled, the IP address is retrieved by DHCP, in which case changes take effect after a board reset. If disabled the object, mgnt2GigmBoardIpAddress defines the addressrw EkiState (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.1.3 |
mgnt2GigmNetmaskNetmask for the board IP address:This OID defined the IP Subnet mask of the Mgnt2rw IpAddress .1.3.6.1.4.1.20044.7.1.1.4 |
mgnt2GigmGatewayAddressTableGateway IP address Table: This table contains all the gateway IP addresses. SEQUENCE OF Mgnt2GigmGatewayAddressEntry .1.3.6.1.4.1.20044.7.1.1.5 |
mgnt2GigmGatewayAddressEntry Mgnt2GigmGatewayAddressEntry .1.3.6.1.4.1.20044.7.1.1.5.1 |
mgnt2GigmGatewayIndexIndex of the IP address of the gatewayrw Integer32 .1.3.6.1.4.1.20044.7.1.1.5.1.1 |
mgnt2GigmGatewayAddressIP address of the gateway :This OID defines the IP address of the gateway attached to the Chassisrw IpAddress .1.3.6.1.4.1.20044.7.1.1.5.1.2 |
mgnt2GigmGatewayOrderGateway priority: This OID defines the priority of the gateway (lower number for higher priority)rw Integer32 .1.3.6.1.4.1.20044.7.1.1.5.1.3 |
mgnt2GigmSyslogIP address of the syslog server:This OID defines the IP address of the syslog of the Mgnt2rw IpAddress .1.3.6.1.4.1.20044.7.1.1.6 |
mgnt2GigmNtpServerIP address of the ntp server:This OID defines the IP address of the ntp server for the Mgnt2rw IpAddress .1.3.6.1.4.1.20044.7.1.1.7 |
mgnt2GigmNodeIpAddressNode IP address :This OID defines the Node IP address in node controller mode for the Mgnt2rw IpAddress .1.3.6.1.4.1.20044.7.1.1.8 |
mgnt2ModulesManagement OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1.2 |
mgnt2GigmBoardTableList of PMs plugged in the Chassis SEQUENCE OF Mgnt2GigmBoardEntry .1.3.6.1.4.1.20044.7.1.2.1 |
mgnt2GigmBoardEntryRow Definition for the PMs table Mgnt2GigmBoardEntry .1.3.6.1.4.1.20044.7.1.2.1.1 |
mgnt2IndexBoardsIndex for PMs tablero Integer32 .1.3.6.1.4.1.20044.7.1.2.1.1.1 |
mgnt2PositionPM Slot number:This OID gives the slot number in which the PM is pluggedro Integer32 .1.3.6.1.4.1.20044.7.1.2.1.1.2 |
mgnt2NamePM name:This OID gives the name of the PM plugged in the Mgnt2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.2.1.1.3 |
mgnt2PortNumberNumber of Client Ports:This OID gives the number of client ports on the PM plugged in the Mgnt2ro Integer32 .1.3.6.1.4.1.20044.7.1.2.1.1.4 |
mgnt2LineNumberNumber of Line Ports:This OID gives the number of line ports on the PM plugged in the Mgnt2ro Integer32 .1.3.6.1.4.1.20044.7.1.2.1.1.5 |
mgnt2GroupNumberNumber of Groups:This OID gives the number of group of clients on the PM plugged in the Mgnt2ro Integer32 .1.3.6.1.4.1.20044.7.1.2.1.1.6 |
mgnt2RootOIDInventoryroot oid of the inventory leaf of the corresponding PMro OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1.2.1.1.7 |
mgnt2SlotOccPM Slot occupied:This OID gives the slots taken by this PMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.2.1.1.8 |
mgnt2SubFunctionLabelSub Function Label: This OID gives the name of the sub function embedded on the Chassis. (applied only on the 100G Chassis)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.2.1.1.9 |
mgnt2SlotStatusSlot Status: This OID gives the status of the slot in the Chassis: See Textual COnventionro Mgnt2SlotStatus .1.3.6.1.4.1.20044.7.1.2.1.1.10 |
mgnt2GigmSelectedBoardPM Slot number selected:PM selected for further operations in the Ekinops module board tree. This number is the slot number.rw INTEGER .1.3.6.1.4.1.20044.7.1.2.7 |
mgnt2GigmMibsTableList of MIBs supported by the Chassis SNMPAgentobsolete SEQUENCE OF Mgnt2GigmMibsEntry .1.3.6.1.4.1.20044.7.1.4 |
mgnt2GigmMibsEntryRow definition for MIBs tableobsolete Mgnt2GigmMibsEntry .1.3.6.1.4.1.20044.7.1.4.1 |
mgnt2IndexMibsIndex for MIBs tableroobsolete Integer32 .1.3.6.1.4.1.20044.7.1.4.1.1 |
mgnt2MibNameMIB name:This OID gives the name of the MIBs supported by the SNMP Agentroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.4.1.2 |
mgnt2MibPartNumberMIB Part Number:This OID gives the part number of the MIBs supported by the SNMP Agentroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.4.1.3 |
mgnt2GigmLogicalNameMgnt2 name:This OID defines the name of the Mgnt2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.5 |
mgnt2GigmEqptTypeEquipment type:This OID defines the type of the Equipmentro Integer32 .1.3.6.1.4.1.20044.7.1.6 |
mgnt2GigmTrapCount OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1.7 |
mgnt2GigmTrapCounterTrap counter:This OID counts the number of trap sentro Integer32 .1.3.6.1.4.1.20044.7.1.7.1 |
mgnt2GigmResetTrapCounterReset trap counter:This OID reset the trap counter to 0rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.1.7.2 |
mgnt2GigmSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1.8 |
mgnt2GigmRoCommunitySNMP Get community:This OID defines the community for the SNMP Get functionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.8.1 |
mgnt2GigmRwCommunitySNMP Set community:This OID defines the community for the SNMP Set functionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.8.2 |
mgnt2GigmTrapCommunitySNMP Trap community:This OID defines the community for the SNMP Trap functionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.8.3 |
mgnt2GigmTime OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1.9 |
mgnt2GigmCurrentHourChassis Hour time:This OID defines the hour of the chassis' timerw INTEGER .1.3.6.1.4.1.20044.7.1.9.1 |
mgnt2GigmCurrentMinuteChassis Minute time:This OID defines the minute of the chassis' timerw INTEGER .1.3.6.1.4.1.20044.7.1.9.2 |
mgnt2GigmCurrentYearChassis year date:This OID defines the year of the chassis' daterw INTEGER .1.3.6.1.4.1.20044.7.1.9.3 |
mgnt2GigmCurrentMonthChassis month date:This OID defines the month of the chassis' daterw INTEGER .1.3.6.1.4.1.20044.7.1.9.4 |
mgnt2GigmCurrentDayChassis day date:This OID defines the day of the chassis' daterw INTEGER .1.3.6.1.4.1.20044.7.1.9.5 |
mgnt2Authentication OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.1.10 |
mgnt2GigmRadiusServerIP address of the RADIUS server:This OID defines the IP address of the external RADIUS server for authenticationrw IpAddress .1.3.6.1.4.1.20044.7.1.10.1 |
mgnt2GigmRadiusPortTCP port number of the RADIUS server:This OID defines the TCP port number of the external RADIUS server for authenticationrw Integer32 .1.3.6.1.4.1.20044.7.1.10.2 |
mgnt2GigmRadiusSecretShared secret of the RADIUS server:This OID defines the shared secret password of the RADIUS server for authenticationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.10.3 |
mgnt2GigmLdapHostIP address of the LDAP host:This OID defines the IP address of the external LDAP server for authenticationrwdeprecated IpAddress .1.3.6.1.4.1.20044.7.1.10.4 |
mgnt2GigmLdapPortTCP port number of the LDAP server:This OID defines the TCP port number of the external LDAP server for authenticationrwdeprecated Integer32 .1.3.6.1.4.1.20044.7.1.10.5 |
mgnt2GigmLdapBaseLDAP base:This OID defines the name of the search base of the LDAP server for authentication<Help>LDAP base name spelled as follows: 'ou=users,ou=network,dc=yourcompany,dc=net'rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.10.6 |
mgnt2GigmLdapVersionProtocol number in use by the LDAP server:This OID defines the protocol version used by the external LDAP server for authentication<Help>Protocol version used by the external LDAP server for authenticationrwdeprecated Integer32 .1.3.6.1.4.1.20044.7.1.10.7 |
mgnt2GigmLdapBindDnLDAP Bind DN:This OID defines the login name used to connect into the LDAP server base for authentication<Help>LDAP binddn spelled as follows: 'cn=ldap_admin,dc=yourcompany,dc=net'rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.10.8 |
mgnt2GigmLdapBindPwCredentials to bind the LDAP server with:This OID defines the credentials to bind the LDAP server with for authentication<Help>Credentials for LDAP access (bindpw)rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.10.9 |
mgnt2GigmLdapScopeScope for LDAP base search:This OID defines the search scope for an LDAP base search <Help>LDAP search scoperwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.10.10 |
mgnt2GigmLdapPamPasswdPAM password handling:This OID defines the way the PAM password is handled for LDAP authentication <Help>The 'pam_password' option sould be one of the following: 'clear', 'crypt', 'md5', 'racf', 'exop'rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.1.10.11 |
mgnt2GigmAuthenticationTypeAuthentication type in userw Mgnt2AuthTypeValues .1.3.6.1.4.1.20044.7.1.10.12 |
mgnt2Hardware OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2 |
mgnt2alarms OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1 |
mgnt2AlmsynthAlm0 OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.0 |
mgnt2AlmAbsFailureChassis Management Module Failure :This OID indicates that the Chassis Management module is in fail condition <Condtype> ABS_FAILURE <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.0.9 |
mgnt2AlmFansFailureChassis Fan Module Failure :This OID indicates that at least one of the three FAN unit of the FAN module is in fail condition <Condtype> FANS_FAILURE <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.0.10 |
mgnt2AlmDef48aPower Input A Present :This OID indicates that there is not input power on the right power connector (A) <Help> This alarm indicates if the power input B is present (left power connector) <Condtype> DEF_48A <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.0.11 |
mgnt2AlmDef48bPower Input B Present :This OID indicates that there is not input power on the right power connector (B) <Help> This alarm indicates if the power input B is present (right power connector) <Condtype> DEF_48B <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.0.12 |
mgnt2AlmMgntDefFuseAMgnt Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition on the Management board <Help> Status of the MGNT Fuse A <Condtype> MGNT_DEF_FUSE_A <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.0.15 |
mgnt2AlmMgntDefFuseBMgnt Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition on the Management board <Help> Status of the MGNT Fuse B <Condtype> MGNT_DEF_FUSE_B <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.0.16 |
mgnt2AlmsynthAlm1 OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.1 |
mgnt2AlmNurgVisualMinor Chassis Alarm :This OID indicates at least one Minor alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Help> This alarm indicates at least one Minor alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Condtype> NURG_VISUAL <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.1.1 |
mgnt2AlmUrgVisualMajor Chassis Alarm :This OID indicates at least one Major alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Help> This alarm indicates at least one Major alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Condtype> URG_VISUAL <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.1.2 |
mgnt2AlmCritVisualCritical Chassis Alarm :This OID indicates at least one Critical alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Help> This alarm indicates at least one Critical alarm is active on the complete chassis (including TR-FAN, MGNT and PM) <Condtype> CRIT_VISUAL <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.1.3 |
mgnt2AlmAcknowledgeAlarm Ack. :This OID indicates the alarms have been acknowledged by the user (locally or remotely) <Help> This status indicates the alarms have been acknowledged by the user (locally or remotely) <Condtype> ACKNOWLEDGE <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.1.16 |
mgnt2AlmboardMgmntSet1 OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.16 |
mgnt2AlmPmSlot1AbsentPM present in Chassis slot 1 :This OID indicates the presence of a PM in Slot 1 of the Chassis . <Help> This status indicates if a PM is detected in slot 1 <Condtype> PM_SLOT1_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.2 |
mgnt2AlmPmSlot2AbsentPM present in Chassis slot 2 :This OID indicates the presence of a PM in Slot 2 of the Chassis . <Help> This status indicates if a PM is detected in slot 2 <Condtype> PM_SLOT2_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.3 |
mgnt2AlmPmSlot3AbsentPM present in Chassis slot 3 :This OID indicates the presence of a PM in Slot 3 of the Chassis . <Help> This status indicates if a PM is detected in slot 3 <Condtype> PM_SLOT3_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.4 |
mgnt2AlmPmSlot4AbsentPM present in Chassis slot 4 :This OID indicates the presence of a PM in Slot 4 of the Chassis . <Help> This status indicates if a PM is detected in slot 4 <Condtype> PM_SLOT4_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.5 |
mgnt2AlmPmSlot5AbsentPM present in Chassis slot 5 :This OID indicates the presence of a PM in Slot 5 of the Chassis . <Help> This status indicates if a PM is detected in slot 5 <Condtype> PM_SLOT5_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.6 |
mgnt2AlmPmSlot6AbsentPM present in Chassis slot 6 :This OID indicates the presence of a PM in Slot 6 of the Chassis . <Help> This status indicates if a PM is detected in slot 6 <Condtype> PM_SLOT6_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.7 |
mgnt2AlmPmSlot7AbsentPM present in Chassis slot 7 :This OID indicates the presence of a PM in Slot 7 of the Chassis . <Help> This status indicates if a PM is detected in slot 7 <Condtype> PM_SLOT7_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.8 |
mgnt2AlmPmSlot8AbsentPM present in Chassis slot 8 :This OID indicates the presence of a PM in Slot 8 of the Chassis . <Help> This status indicates if a PM is detected in slot 8 <Condtype> PM_SLOT8_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.9 |
mgnt2AlmPmSlot9AbsentPM present in Chassis slot 9 :This OID indicates the presence of a PM in Slot 9 of the Chassis . <Help> This status indicates if a PM is detected in slot 9 <Condtype> PM_SLOT9_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.10 |
mgnt2AlmPmSlot10AbsentPM present in Chassis slot 10 :This OID indicates the presence of a PM in Slot 10 of the Chassis . <Help> This status indicates if a PM is detected in slot 10 <Condtype> PM_SLOT10_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.11 |
mgnt2AlmPmSlot11AbsentPM present in Chassis slot 11 :This OID indicates the presence of a PM in Slot 11 of the Chassis . <Help> This status indicates if a PM is detected in slot 11 <Condtype> PM_SLOT11_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.12 |
mgnt2AlmPmFanAbsentFAN module present in Chassis :This OID indicates the presence of the FAN module in the Chassis. <Help> This alarm indicates if the FAN module is detected in the chassis. <Condtype> PM_FAN_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.16.14 |
mgnt2AlmboardMgmntSet2 OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.17 |
mgnt2AlmPmSlot12AbsentPM present in Chassis slot 12 :This OID indicates the presence of a PM in Slot 12 of the Chassis . <Help> This status indicates if a PM is detected in slot 12 <Condtype> PM_SLOT12_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.1 |
mgnt2AlmPmSlot13AbsentPM present in Chassis slot 13 :This OID indicates the presence of a PM in Slot 13 of the Chassis . <Help> This status indicates if a PM is detected in slot 13 <Condtype> PM_SLOT13_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.2 |
mgnt2AlmPmSlot14AbsentPM present in Chassis slot 14 :This OID indicates the presence of a PM in Slot 14 of the Chassis . <Help> This status indicates if a PM is detected in slot 14 <Condtype> PM_SLOT14_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.3 |
mgnt2AlmPmSlot15AbsentPM present in Chassis slot 15 :This OID indicates the presence of a PM in Slot 15 of the Chassis . <Help> This status indicates if a PM is detected in slot 15 <Condtype> PM_SLOT15_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.4 |
mgnt2AlmPmSlot16AbsentPM present in Chassis slot 16 :This OID indicates the presence of a PM in Slot 16 of the Chassis . <Help> This status indicates if a PM is detected in slot 16 <Condtype> PM_SLOT16_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.5 |
mgnt2AlmPmSlot17AbsentPM present in Chassis slot 17 :This OID indicates the presence of a PM in Slot 17 of the Chassis . <Help> This status indicates if a PM is detected in slot 17 <Condtype> PM_SLOT17_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.6 |
mgnt2AlmPmSlot18AbsentPM present in Chassis slot 18 :This OID indicates the presence of a PM in Slot 18 of the Chassis . <Help> This status indicates if a PM is detected in slot 18 <Condtype> PM_SLOT18_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.7 |
mgnt2AlmPmSlot19AbsentPM present in Chassis slot 19 :This OID indicates the presence of a PM in Slot 19 of the Chassis . <Help> This status indicates if a PM is detected in slot 19 <Condtype> PM_SLOT19_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.8 |
mgnt2AlmPmSlot20AbsentPM present in Chassis slot 20 :This OID indicates the presence of a PM in Slot 20 of the Chassis . <Help> This status indicates if a PM is detected in slot 20 <Condtype> PM_SLOT20_ABSENT <Probcause> other(1) <Alarmtype> other (1) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.17.9 |
mgnt2AlmfanMgmnt OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.20 |
mgnt2AlmPbFan1FailFan Unit #1 Failed On Fan Module :This OID indicates a failure on fan 1. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #1 is in fail condition <Condtype> PB_FAN1_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.20.2 |
mgnt2AlmPbFan2FailFan Unit #2 Failed On Fan Module :This OID indicates a failure on fan 2. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #2 is in fail condition <Condtype> PB_FAN2_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.20.3 |
mgnt2AlmPbFan3FailFan Unit #3 Failed On Fan Module :This OID indicates a failure on fan 3. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #3 is in fail condition <Condtype> PB_FAN3_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.20.4 |
mgnt2AlmPbFan4FailFan Unit #4 Failed On Fan Module :This OID indicates a failure on fan 4. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #4 is in fail condition <Condtype> PB_FAN4_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.20.5 |
mgnt2AlmPbFan5FailFan Unit #5 Failed On Fan Module :This OID indicates a failure on fan 5. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #5 is in fail condition <Condtype> PB_FAN5_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.20.6 |
mgnt2AlmPbFan6FailFan Unit #6 Failed On Fan Module :This OID indicates a failure on fan 6. Removal of the fan unit or no rotation sets the OID. <Help> This alarm indicates if the FAN #6 is in fail condition <Condtype> PB_FAN6_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.20.7 |
mgnt2AlmFanFilterAbsentDust Filter Presence :This OID indicates that the dust filter is not present<Help> This alarm indicates if the Dust Filter is detected in the chassis. <Condtype> FAN_FILTER_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.20.16 |
mgnt2AlmfanPwrMgmnt OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.24 |
mgnt2AlmFanPwrProtOnFan Backup Power :This OID indicates the backup power on the FAN module is switched on <Condtype> FAN_PWR_PROT_ON <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.24.12 |
mgnt2AlmFanPwrFail1Fan Main Power :This OID indicates a failure on the main power of the FAN module <Help> This alarm indicates if one of the tow main power convert of the FAN module is in fail condition <Condtype> FAN_PWR_FAIL_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.24.13 |
mgnt2AlmFanDefFuseAFan Fuse A Fail :This OID indicates that the fuse of the power input A is in fail condition on the Fan board <Help> Status of the FAN Fuse A <Condtype> FAN_DEF_FUSE_A <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.24.15 |
mgnt2AlmFanDefFuseBFan Fuse B Fail :This OID indicates that the fuse of the power input B is in fail condition on the Fan board <Help> Status of the FAN Fuse B <Condtype> FAN_DEF_FUSE_B <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.24.16 |
mgnt2AlmremoveablefanModuleFail OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.25 |
mgnt2AlmFan1ModuleAbsentFAN Module #1 Present In Chassis :This OID indicates the presence of the FAN module #1 in the Chassis.<Help> This alarm indicates if the FAN module #1 is detected in the chassis. <Condtype> FAN1_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.25.1 |
mgnt2AlmFan2ModuleAbsentFAN Module #2 Present In Chassis :This OID indicates the presence of the FAN module #2 in the Chassis.<Help> This alarm indicates if the FAN module #2 is detected in the chassis. <Condtype> FAN2_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.25.2 |
mgnt2AlmFan3ModuleAbsentFAN Module #3 Present In Chassis :This OID indicates the presence of the FAN module #3 in the Chassis.<Help> This alarm indicates if the FAN module #3 is detected in the chassis. <Condtype> FAN3_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.25.3 |
mgnt2AlmFan4ModuleAbsentFAN Module #4 Present In Chassis :This OID indicates the presence of the FAN module #4 in the Chassis.<Help> This alarm indicates if the FAN module #4 is detected in the chassis. <Condtype> FAN4_MODULE_ABSENT <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.25.4 |
mgnt2AlmremoveableFanModuleMgmnt OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.26 |
mgnt2AlmFan1ModuleFailFAN Module #1 Failure :This OID indicates a failure on FAN module #1 <Help> This alarm indicates if the FAN module #1 is in fail condition <Condtype> FAN1_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.26.1 |
mgnt2AlmFan2ModuleFailFAN Module #2 Failure :This OID indicates a failure on FAN module #2 <Help> This alarm indicates if the FAN module #2 is in fail condition <Condtype> FAN2_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.26.2 |
mgnt2AlmFan3ModuleFailFAN Module #3 Failure :This OID indicates a failure on FAN module #3 <Help> This alarm indicates if the FAN module #3 is in fail condition <Condtype> FAN3_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.26.3 |
mgnt2AlmFan4ModuleFailFAN Module #4 Failure :This OID indicates a failure on FAN module #4 <Help> This alarm indicates if the FAN module #4 is in fail condition <Condtype> FAN4_MODULE_FAIL <Probcause> heatingVentCoolingSystemProblem (22) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.26.4 |
mgnt2AlmswAlarm1 OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.32 |
mgnt2AlmApiErrorComm fail between Agent and Transport :This OID indicates a failure detected on the Agent.The failure is located on a communication process with the modules. <Help> This alarm indicates if there is a communication mismatch between the MGNT board and a single PM <Condtype> API_ERROR <Probcause> adapterError (2) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.32.1 |
mgnt2AlmFifoCmdErrorSNMP Agent to Transport comm FIFO fail :This OID indicates a failure inside the FIFO stack. The FIFO containing the messages from the agent (write) to the PMs is full <Help> This alarm indicates if there is a communication mismatch between the MGNT board and all PM <Condtype> FIFO_CMD_ERROR <Probcause> adapterError (2) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.32.2 |
mgnt2AlmPollingManagerErrorPolling Manager fail :This OID indicates a failure on the Manager polling the PM's <Help> <Help> This alarm indicates if there is a polling manager failure between the MGNT and the Pm's <Condtype> POLLING_MANAGER_ERROR <Probcause> adapterError (2) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.32.3 |
mgnt2AlmapiErrorCodeAPI Error Identification :Error number and description of the abs1AlmApiError object <Condtype> API_ERROR_CODE_1 <Probcause> <Alarmtype>ro INTEGER .1.3.6.1.4.1.20044.7.2.1.33 |
mgnt2AlmlogMgmnt OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.34 |
mgnt2AlmLogFileFullLog File Full Alarm :This OID indicates that a log file is full. This file must be cleared to insure correct log function <Help> This alarm indicates that one of the log file is Full <Condtype> LOG_FILE_FULL <Probcause> fileError (18) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.34.1 |
mgnt2AlmLog80FullLog File Full Warning :This OID indicates that a log file is 80% full. <Help> This alarm indicates that one of the log file is 80% Full <Condtype> LOG_80_FULL <Probcause> fileError (18) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.34.2 |
mgnt2AlmntpSyncLoss OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.1.35 |
mgnt2AlmNtpSyncLossNTP Sync Loss :This OID indicates a loss of synchronisation with the NTP Server. <Help> This alarm indicates a loss of synchronisation with the NTP Server. <Condtype> NTP_SYNC_LOSS <Probcause> timingProblem (53) <Alarmtype> timeDomainViolation (11) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.35.1 |
mgnt2AlmCpuTempOverRangeCPU HighTemperature Warning :This OID indicates a temperature over the expected range on the CPU<Help> This warning indicates that the temperature of the CPU is reaching its internal limit <Condtype> CPU_TEMP_OVER_RANGE <Probcause> other(1) <Alarmtype> equipmentAlarm (5) <Polarity> (2)ro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.1.35.2 |
mgnt2controls OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2 |
mgnt2Ctrlsynth5 OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2.5 |
mgnt2CtrlChassisShutdownShut Down of the Management Module :This OID shall be set before shutting down the Chassis power. A delay of 5 sec is necessary between this OID is set and power is shut down. <Help> This control initiates a shutdown of the MGNT board,rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.5.2 |
mgnt2CtrlChassisWarmResetReset of the Management Module :This oid triggers a 'warm' reset of the Chassis . This type of reset is not traffic affecting and the modules configuration remains unchanged. <Help> This control initiates a warm reset of the MGNT board,rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.5.3 |
mgnt2CtrlChassisColdResetCold Reset of the Management Module :This oid triggers a 'cold' reset of the Chassis . This type of reset is not traffic affecting and the modules configuration remains unchanged. <Help> This control initiates a cold reset of the MGNT board,rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.5.4 |
mgnt2CtrltestLed OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2.18 |
mgnt2CtrlGreenLedGreen Leds Test :This OID switches on all the green Leds as a test feature <Help> This control initiates a test leds turning all the LEDs of the chassis to greenrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.18.1 |
mgnt2CtrlRedLedRed Leds Test :This OID switches on all the red Leds as a test feature <Help> This control initiates a test leds turning all the LEDs of the chassis to redrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.18.2 |
mgnt2CtrlLedOffSwitch off Leds Test :This OID switches off all the Leds as a test feature <Help> This control initiates a test leds turning all the LEDs of the complete chassis to OFFrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.18.3 |
mgnt2CtrllogFile OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2.19 |
mgnt2CtrlLogFileResetLog File Reset :This OID clears all the log filesrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.19.1 |
mgnt2CtrlmgntSaveConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2.23 |
mgnt2CtrlSaveConfigSave Configuration :This OID is used save the configuration related to the enable and mode traps objects <Help> This control saves the customer configuration on the MGNT boardrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.23.1 |
mgnt2CtrlmgntGetGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2.24 |
mgnt2CtrlGetGlobalConfigGet Global Chassis Config :This OID is used to create a global configuration file of the chassis <Help> This control creates a single configuration file from PM's and MGNT configuration file into the RAMrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.24.1 |
mgnt2CtrlmgntPutGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2.25 |
mgnt2CtrlPutGlobalConfigPut Global Chassis Config :This OID is used to extract a global configuration file of the chassis <Help> This control creates configuration files to PM's and MGNT from a single configuration file in the RAMrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.25.1 |
mgnt2CtrlmgntAcknowledge OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.2.26 |
mgnt2CtrlAcknowledgeAlarm Ack. :This OID is used to acknowledge the current active alarms of the chassis <Help> This control is used to acknowledge the current active alarms of the chassisrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.2.26.1 |
mgnt2config OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3 |
mgnt2CfgethPort2 OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.17 |
mgnt2CfgEthPort2Disable2nd Ethernet Port Disable :This OID disables 'Ethernet Port 2' .When not required, this port must be disabled in order to prevent unwanted access. <Help> Disable the second Ethernet portrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.17.1 |
mgnt2CfgChassisEthernetSplitChassis Ethernet Split :This OID enables the split between the two kendings. <Help> Enable/Disable the switch between the two kendingsrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.17.2 |
mgnt2CfgmgntDccEnableDCC Access :This OID selects the mode to enable the DCC on the slots. This Mode enables the Slots 2-4-6-8-10 , or the Slots 2-6-10-14-18. <Help> Defines the DCC access on the backplane of the chassis (Slots 2-4-6-8-10 or Slots 2-6-10-14-18)rw Mgnt2DccAccessValues .1.3.6.1.4.1.20044.7.2.3.18 |
mgnt2CfgpmTrapEnable OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.20 |
mgnt2CfgPmCriticalTrapEnCritical Alarm Traps Enable :This OID, when set, enables the generation of the critical alarm trap for all the PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on critical alarm detected on PMrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.20.1 |
mgnt2CfgPmMajorTrapEnMajor Alarm Traps Enable :This OID, when set, enables the generation of the major alarm trap for all the PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on major alarm detected on PMrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.20.2 |
mgnt2CfgPmMinorTrapEnMinor Alarm Traps Enable :This OID, when set, enables the generation of the minor alarm trap for all the PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on minor alarm detected on PMrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.20.3 |
mgnt2CfgPmControlTrapEnControl Traps Enable :This OID, when set, enables the generation of a trap when a control is sent to a PM plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on control sent to PMrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.20.5 |
mgnt2CfgPmConfigTrapEnConfig Traps Enable :This OID, when set, enables the generation of a trap when the configuration of a PM plugged in the chassis is modified <Help> In detailed traps mechanism, enable the trap emission on PM configuration modificatiorw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.20.6 |
mgnt2CfgmgntTrapEnable OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.21 |
mgnt2CfgMgntCriticalTrapEnMGNT Critical Alarm Traps Enable :This OID, when set, enables the generation of the critical alarm trap for the MGNT and FAN board <Help> In detailed traps mechanism, enable the trap emission on critical alarm detected on MGNT and FANrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.21.1 |
mgnt2CfgMgntMajorTrapEnMGNT Major Traps Enable :This OID, when set, enables the generation of the major alarm trap for the MGNT and FAN board <Help> In detailed traps mechanism, enable the trap emission on major alarm detected on MGNT and FANrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.21.2 |
mgnt2CfgMgntMinorTrapEnMGNT Minor Alarm Traps Enable :This OID, when set, enables the generation of the minor alarm trap for the MGNT and FAN board <Help> In detailed traps mechanism, enable the trap emission on minor alarm detected on MGNT and FANrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.21.3 |
mgnt2CfgMgntControlTrapEnMGNT Control Traps Enable :This OID, when set, enables the generation of a trap when a control is sent to a MGNT plugged in the chassis <Help> In detailed traps mechanism, enable the trap emission on control sent to MGNTrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.21.5 |
mgnt2CfgMgntConfigTrapEnMGNT Config Traps Enable :This OID, when set, enables the generation of a trap when the configuration of a MGNT plugged in the chassis is modified <Help> In detailed traps mechanism, enable the trap emission on MGNT configuration modificationrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.21.6 |
mgnt2CfgMgntEventTrapEnMGNT Event Traps Enable :This OID, when set, enables the generation of a trap when an event occurs on the chassis <Help> In detailed traps mechanism, enable the trap emission on event detected in the chassisrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.21.7 |
mgnt2CfgmgntTrapModeTraps Mode :This OID is used to define the trap mode (synthetic or detailed mode) <Help> Selects the traps mechanismrw Mgnt2TrapModeValues .1.3.6.1.4.1.20044.7.2.3.22 |
mgnt2CfgsyslogEnable OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.23 |
mgnt2CfgSyslogEventEnSyslog Event Enable :This OID, when set, enables the generation of a syslog, when an event has been detected <Help> Enable a syslog emission on event detected on the chassisrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.23.1 |
mgnt2CfgSyslogConfigEnSyslog Config Enable :This OID, when set, enables the generation of a syslog, when the configuration has been changed. <Help> Enable a syslog emission on a configuration change detected on the chassisrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.23.2 |
mgnt2CfgSyslogCtrlEnSyslog Control Enable :This OID, when set, enables the generation of a syslog, when a control is set <Help> Enable a syslog emission on a control operated on the chassisrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.23.3 |
mgnt2CfgSyslogAlarmEnSyslog Alarm Enable :This OID, when set, enables the generation of a syslog, when an alarm occurs <Help> Enable a syslog emission on an alarm detected on the chassirw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.23.4 |
mgnt2CfgntpTimeZoneNTP Time Zone :This OID defines the time zone of the MGNT board for the NTP server <Help> This object defines the time zone of the MGNT board (from -12 to +12 hours from the GMT).rw INTEGER (-12..12) .1.3.6.1.4.1.20044.7.2.3.24 |
mgnt2CfgpmConfEnable OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.25 |
mgnt2CfgPmBackupEnableAutomatic Config Backup :This OID enables the automatic PM configuration backup mechanism on PM insertion or PM configuration modification. <Help> This parameter enables the automatic PM configuration backup mechanism on PM insertion or PM configuration modificatiorw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.25.1 |
mgnt2CfgPmRestoreEnableAutomatic Config Restore :This OID enables the automatic PM configuration restore mechanism on PM insertion <Help> This parameter enables the automatic PM configuration restore mechanism on PM insertiorw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.25.2 |
mgnt2CfginactivityTimeoutIdle Timeout :This OID defines the idle timeout (in minutes) to automatically logout from the craft and from the CLI. <Help> This object defines the idle timeout (in minutes) to automatically logout from the craft and from the CLIrw INTEGER (-1..255) .1.3.6.1.4.1.20044.7.2.3.26 |
mgnt2CfgcliAccessCLI access :This OID selects the protocol for the remote access to a CLI user. <Help> This object defines the protocol used for a remote CLI.rw Mgnt2CliAccessValues .1.3.6.1.4.1.20044.7.2.3.27 |
mgnt2CfgcraftAccessCRAFT access :This OID selects the remote access to a CRAFT user. <Help> This object defines the access for a remote CRAFT.rw Mgnt2CraftAccessValues .1.3.6.1.4.1.20044.7.2.3.28 |
mgnt2CfgperfModes1PERF Synchro Source :This OID selects the source of the synchronisation (Internal/External). <Help> This object defines the source of the synchronization to operate performance monitoring.rw EkiSynchroMode (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.29 |
mgnt2CfgalarmModelActivAcknowledge mode :This OID defines the alarms akcnowledge mode <Help> This configuration defines the alarms akcnowledge moderw Mgnt2AckMode .1.3.6.1.4.1.20044.7.2.3.30 |
mgnt2CfgnetworkInputNetwork input :This OID selects the connection of the Ethernet Network input to either the switches (2) or the daughter board (1) , in this case the MGNT can act as a router <Help> This configuration defines the use of the Network input of the front panelrw Mgnt2NetMode .1.3.6.1.4.1.20044.7.2.3.31 |
mgnt2CfgmasterEthModeDHCP Master Ethernet Mode :This OID selects the mode of the Master Ethernet in DHCP mode (2) or in Static Mode(1) <Help> This configuration defines the use of the Master Ethernet Moderw Mgnt2MasterEthMode .1.3.6.1.4.1.20044.7.2.3.32 |
mgnt2CfgsubnetModeDHCP Subnet Mode :This OID selects the mode of the Subnet in DHCP mode (2) or in Static Mode(1) <Help> This configuration defines the use of the Subnet Moderw Mgnt2SubnetEthMode .1.3.6.1.4.1.20044.7.2.3.33 |
mgnt2CfgrstpMode OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.34 |
mgnt2CfgRstpEnableRSTP Enable :This OID enables the RSTP algorythm <Help> This configuration defines the use of RSTPrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.34.1 |
mgnt2CfglldpMode OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.35 |
mgnt2CfgLldpEnableLLDP Enable :This OID enables the LLDP algorythm <Help> This configuration defines the use of LLDPrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.35.1 |
mgnt2CfglogModeLog Mode :This OID enables the log file mode<Help> This configuration defines the use of the log modrw Mgnt2LogFileMode .1.3.6.1.4.1.20044.7.2.3.36 |
mgnt2CfgnodeMode OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.37 |
mgnt2CfgNodeControllerEnableNode Controller Mode :This OID enables the node controller mode<Help> This configuration defines the use of the node controller modrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.37.1 |
mgnt2CfgunprivilegedUsersMode OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.38 |
mgnt2CfgRestrictUnprivilegeUsersRestrict Unprivileged Users Rights :This OID enables the restriction of unprivileged user rights to modify their own password <Help> This parameter enables the restriction of unprivileged user rights to modify their own passwordrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.38.1 |
mgnt2CfgoscDccLinkUpThresholdOSC/DCC Link Up Thresh. [10-30]s :This OID defines the confirmation threshold to consider an OSC/DCC link as up <Help> This parameter defines the confirmation threshold to consider an OSC/DCC link as uprw INTEGER .1.3.6.1.4.1.20044.7.2.3.39 |
mgnt2CfgoscDccLinkDownThresholdOSC/DCC Link Down Thresh. [2-3]s :This OID defines the confirmation threshold to consider an OSC/DCC link as down <Help> This parameter defines the confirmation threshold to consider an OSC/DCC link as down.rw INTEGER .1.3.6.1.4.1.20044.7.2.3.40 |
mgnt2CfgaccountAutoLockAccount Auto-Lock [-1 / 1-10] err :This OID defines the number of error password to lock an account. This counter is reset on successful login or after an administrator defined period (see Fail count reset) Set to -1 to disables the feature.<Help> This parameter defines the number of error password to lock an account. This counter is reset on successful login or after an administrator defined period (see Fail count reset) Set to -1 to disables the feature.rw INTEGER (-1..255) .1.3.6.1.4.1.20044.7.2.3.41 |
mgnt2CfgfailCountResetFail Count Reset [-1 / 1-10] hrs :This OID defines the minimum time (in hours) to reset the failed login counter. This counter is also reset on successful login. Set to -1 to disable the feature.<Help> This parameter defines the minimum time (in hours) to reset the failed login counter. This counter is also reset on successful login. Set to -1 to disable the featurerw INTEGER (-1..255) .1.3.6.1.4.1.20044.7.2.3.42 |
mgnt2CfgftpMode OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.44 |
mgnt2CfgFtpEnableFTP Enable :This OID enables the FTP protocol <Help> This configuration enables the FTP protocolrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.44.1 |
mgnt2CfgtftpMode OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.2.3.45 |
mgnt2CfgTftpEnableTFTP Enable :This OID enables the TFTP protocol <Help> This configuration enables the TFTP protocolrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.2.3.45.1 |
mgnt2Traps OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.3 |
mgnt2TrapApiApi error trap with its number NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.1 |
mgnt2TrapSwErrorChassis software error other API NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.2 |
mgnt2TrapBoardInsertedA board has been plugged in NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.4 |
mgnt2TrapBoardRemovedA board has been plugged out NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.5 |
mgnt2TrapRestoreConfDoneThe Configuration has been restored from the management board NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.6 |
mgnt2TrapGlobalPowerFailA global power supply failure has been detected NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.8 |
mgnt2TrapFanPowerFailA Fan power supply failure has been detected NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.9 |
mgnt2TrapGigmPowerFailA power supply default has been detected in the management board NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.10 |
mgnt2TrapFanFailA Fan failure has been detected NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.11 |
mgnt2TrapLogFileFullIndicates that the corresponding log file is almost full NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.20 |
mgnt2TrapAlarmIndicates that an alarm state has changed NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.30 |
mgnt2TrapEventIndicates that an event has occured NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.31 |
mgnt2TrapControlIndicates that a control has been set to the module NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.32 |
mgnt2TrapConfigIndicates that a config word has been changed NOTIFICATION-TYPE .1.3.6.1.4.1.20044.7.3.33 |
mgnt2TrapBoardNumberThis OID gives the slot number of the PM that sent the last trapro INTEGER .1.3.6.1.4.1.20044.7.3.50 |
mgnt2TrapSeverityThis OID gives the trap severityro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.3.51 |
mgnt2TrapSourcePmThis OID gives the mnemonic of the pm who sent a trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.3.52 |
mgnt2TrapSourcePortTypeThis OID gives the type of the port who sent a trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.3.53 |
mgnt2TrapSourcePortNumberThis OID gives the port number of the PM that sent the last trapro INTEGER .1.3.6.1.4.1.20044.7.3.54 |
mgnt2TrapSourceLabelThis OID gives the label of the alarm who sent a trapro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.3.55 |
mgnt2TrapSourceValueThis OID gives the value of the alarm who sent a trapro EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.3.56 |
mgnt2TrapEventLabelThis OID gives the label of the eventro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.3.57 |
mgnt2TrapNodeControllerIpAddressThis OID gives the IP address of the Node Controllerro IpAddress .1.3.6.1.4.1.20044.7.3.58 |
mgnt2TrapChassisIdThis OID gives the chassis IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.3.59 |
mgnt2SoftwareManagement OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.4 |
mgnt2DwlUploadingTableSNMP Agent SW packages in ram: List of the SNMP agent software packages available in /ram for download on the Chassis managment module flashdeprecated SEQUENCE OF Mgnt2DwlUploadingEntry .1.3.6.1.4.1.20044.7.4.1 |
mgnt2DwlUploadingEntryRow definition for the package uploading tabledeprecated Mgnt2DwlUploadingEntry .1.3.6.1.4.1.20044.7.4.1.1 |
mgnt2IndexUploadIndex for uploading tablerodeprecated Integer32 .1.3.6.1.4.1.20044.7.4.1.1.1 |
mgnt2DwlUploadFileNamePackage filename in RAM:This OID gives the name of the SNMP agent software packages in RAMrodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.4.1.1.2 |
mgnt2ImmediateReplacementImmediat Agent Replacement:This OID indicates to switch to selected SNMP agent immediately or after reset of the MGNT2rwdeprecated EkiState (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.1.1.3 |
mgnt2FileUploadAgent File Upload:This OID validates the upload of the SNMP agent from RAM to FLASHrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.1.1.4 |
mgnt2DeletePackageFromRamDelete Package from RAM:This OID requests to delete the SNMP Agent SW package from RAMrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.1.1.5 |
mgnt2FlashingInProgressFlashing in Progress:This OID indicates whether there is a file upload to FLASH in progressrodeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.1.1.6 |
mgnt2DwlPackageTableList of SNMP agent software packages present in flash memorydeprecated SEQUENCE OF Mgnt2DwlPackageEntry .1.3.6.1.4.1.20044.7.4.2 |
mgnt2DwlPackageEntryRow definition for the package management tabledeprecated Mgnt2DwlPackageEntry .1.3.6.1.4.1.20044.7.4.2.1 |
mgnt2IndexPackageIndex for package management tablerodeprecated Integer32 .1.3.6.1.4.1.20044.7.4.2.1.1 |
mgnt2DwlPackageFileNamePackage File name in FLASH:This OID gives the name of the SNMP agent software package in FLASHrodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.4.2.1.2 |
mgnt2ExtractedPackExtracted SNMP agent software pack.: Indicates whether the package is currently extracted in the FLASH. If it is, it must not be deletedrodeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.2.1.3 |
mgnt2SwitchToSwitch to package:This OID activates the SNMP Agent Software packagerwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.2.1.4 |
mgnt2ImmediateImmediate SNMP agent activation: This OID indicates whether the package is scheduled for immediate activation or activation will take place following the next resetrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.2.1.5 |
mgnt2DeletePackageFromFlashDelete package from FLASH:This OID deletes the SNMP agent software package from the FLASHrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.2.1.6 |
mgnt2PackageExtractionInProgressPackage extraction in progress:This OID indicates that a SNMP agent software activation is in progressrodeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.2.1.7 |
mgnt2DwlUploadingTableUpdateUploading Table update:This OID updates the contents of the uploading tablerwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.3 |
mgnt2LoadPMTableList of the PM module software files (GW/SW) present on the repositorydeprecated SEQUENCE OF Mgnt2LoadPMEntry .1.3.6.1.4.1.20044.7.4.4 |
mgnt2LoadPMEntryRow definition for the LOAD article tabledeprecated Mgnt2LoadPMEntry .1.3.6.1.4.1.20044.7.4.4.1 |
mgnt2LoadPMIndexIndex for Load article tablerodeprecated Integer32 .1.3.6.1.4.1.20044.7.4.4.1.1 |
mgnt2LoadFileNamePM Upgrade filename:This OID gives the name of the filerodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.4.4.1.2 |
mgnt2LoadFileTypePM upgrade file type:This OID gives the type of file (gateware or software)rodeprecated EkiLoadGWSW (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.4.1.3 |
mgnt2LoadStatePM upgrade status:This OID gives the status of the selected Load filerodeprecated EkiLoadState (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.4.1.4 |
mgnt2LoadModuleNumberPM ugprade target:This OID defines the slot number of the PM to upgraderwdeprecated Integer32 .1.3.6.1.4.1.20044.7.4.4.1.5 |
mgnt2LoadResetMethodPM upgrade reset method:This OID defines the reset method (manual, immediate or scheduled)rwdeprecated EkiLoadPermutMethod (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.4.1.6 |
mgnt2LoadResetModePM upgrade reset mode:This OID defines the type of reset (cold or warm)rwdeprecated EkiLoadPermutMode (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.4.1.7 |
mgnt2LoadBankNumberPM upgrade bank number:This OID defines the target bank number in the PM's flashrwdeprecated Integer32 .1.3.6.1.4.1.20044.7.4.4.1.8 |
mgnt2LoadDownloadProgressPM upgrade progress:This OID gives the upgrade progress (percentage)rodeprecated Integer32 .1.3.6.1.4.1.20044.7.4.4.1.9 |
mgnt2LoadTransferPM upgrade transfer:This OID launchs the transfer of the associated file to the selected PM's flashrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.4.1.10 |
mgnt2LoadDeletePM upgrade delete file:This OID deletes the associated file from the RAM of the management boardrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.4.1.11 |
mgnt2LoadPMTableUpdateLoad PM Table update:This OID updates the contents of the Load tablerwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.5 |
mgnt2DwlEkicraftPkgTableList of Ekicraft software packages present in flash memorydeprecated SEQUENCE OF Mgnt2DwlEkicraftPkgEntry .1.3.6.1.4.1.20044.7.4.6 |
mgnt2DwlEkicraftPkgEntryRow definition for the package management tabledeprecated Mgnt2DwlEkicraftPkgEntry .1.3.6.1.4.1.20044.7.4.6.1 |
mgnt2IndexEkicraftPkgIndex for Ekicraft package management tablerodeprecated Integer32 .1.3.6.1.4.1.20044.7.4.6.1.1 |
mgnt2DwlEkicraftPkgFileNamePackage File name in FLASH:This OID gives the name of the Ekicraft software package in FLASHrodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.4.6.1.2 |
mgnt2DwlEkicraftExtractedPackExtracted Ekicraft software pack.: Indicates whether the package is currently extracted in the FLASH. If it is, it must not be deletedrodeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.6.1.3 |
mgnt2DwlEkicraftSwitchToSwitch to package:This OID activates the Ekicraft Software packagerwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.6.1.4 |
mgnt2DwlEkicraftImmediateImmediate Ekicraft activation: This OID indicates whether the package is scheduled for immediate activation or activation will take place following the next resetrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.6.1.5 |
mgnt2DeleteEkicraftPkgFromFlashDelete package from FLASH:This OID deletes the Ekicraft software package from the FLASHrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.6.1.6 |
mgnt2EkicraftPkgExtractionInProgressPackage extraction in progress:This OID indicates that an Ekicraft activation is in progressrodeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.4.6.1.7 |
mgnt2ConfigManagement OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.5 |
mgnt2CnfUploadConfigFilesTableList of configuration files uploaded to RAMdeprecated SEQUENCE OF Mgnt2CnfUploadConfigFilesEntry .1.3.6.1.4.1.20044.7.5.1 |
mgnt2CnfUploadConfigFilesEntryRow definition for the package uploading tabledeprecated Mgnt2CnfUploadConfigFilesEntry .1.3.6.1.4.1.20044.7.5.1.1 |
mgnt2CnfUploadConfigIndexIndex of config filesrodeprecated Integer32 .1.3.6.1.4.1.20044.7.5.1.1.1 |
mgnt2CnfConfigFileNameConfiguration filename in RAM:This OID gives the name of the configuration file in RAMrodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.5.1.1.2 |
mgnt2CnfConfigSlotConfiguration target:This OID defines the target slot number for the configuration filerwdeprecated Integer32 .1.3.6.1.4.1.20044.7.5.1.1.3 |
mgnt2CnfConfigUploadConfiguration Upload:This OID uploads the configuration file to the specified slot number in the PM FLASHrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.5.1.1.4 |
mgnt2CnfDeleteConfigFileConfiguration delete from RAM:This OID deletes the configuration file from RAMrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.5.1.1.5 |
mgnt2CnfManageConfigFilesTableList of configuration files uploaded to RAMdeprecated SEQUENCE OF Mgnt2CnfManageConfigFilesEntry .1.3.6.1.4.1.20044.7.5.2 |
mgnt2CnfManageConfigFilesEntryRow definition for the package uploading tabledeprecated Mgnt2CnfManageConfigFilesEntry .1.3.6.1.4.1.20044.7.5.2.1 |
mgnt2CnfManageConfigIndexIndex of config file slotsrodeprecated Integer32 .1.3.6.1.4.1.20044.7.5.2.1.1 |
mgnt2CnfManageConfigFileIDConfiguration file ID in FLASH:This OID gives the ID of the configuration file in MGNT2 FLASHrwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.5.2.1.2 |
mgnt2CnfManageConfigFileNameConfiguration file name in FLASH:This OID gives the name of the configuration file in MGNT2 FLASHrwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.5.2.1.3 |
mgnt2CnfModuleSlotNumberConfiguration target:This OID defines the target module slot number for the configuration filerwdeprecated Integer32 .1.3.6.1.4.1.20044.7.5.2.1.4 |
mgnt2CnfBackupConfigConfiguration backup:This OID backups the configuration of the specified module to the selected file in MGNT2 FLASHrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.5.2.1.5 |
mgnt2CnfRestoreConfigConfiguration Restore:This OID restores the configuration of the specified module from the selected file in MGNT2 FLASHrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.5.2.1.6 |
mgnt2CnfExportConfigConfiguration Export:This OID exports the selected file in MGNT2 FLASH to a file in RAMrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.5.2.1.7 |
mgnt2CnfDeleteConfigConfiguration delete from FLASH:This OID deletes the configuration file from the MGNT2 FLASHrwdeprecated EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.5.2.1.8 |
mgnt2RemoteInventory OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.6 |
mgnt2RinvHwPlatformChassis Hardware inventory:This OID gives the Hardware inventory of the Mgnt2 management modulerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.1 |
mgnt2RinvSoftwarePackageChassis Software package inventory:this OID gives the Software package inventory of the Mgnt2 management modulerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.2 |
mgnt2RinvGatewareChassis Gateware inventory:This OID gives the gateware inventory of the Mgnt2 management modulerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.3 |
mgnt2RinvAgentChassis Software inventory:This OID gives the software inventory of the Mgnt2 management modulerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.4 |
mgnt2RinvCraftChassis Craft inventory:This OID gives the craft inventory of the Mgnt2 management modulerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.5 |
mgnt2RinvLinuxChassis Linux inventory:This OID gives the linux inventory of the Mgnt2 management modulerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.6 |
mgnt2GigmPlugInTableList of Plug-ins present SEQUENCE OF Mgnt2GigmPlugInEntry .1.3.6.1.4.1.20044.7.6.7 |
mgnt2GigmPlugInEntryRow Definition for the Plug-ins table Mgnt2GigmPlugInEntry .1.3.6.1.4.1.20044.7.6.7.1 |
mgnt2IndexPlugInsIndex for PMs tablero Integer32 .1.3.6.1.4.1.20044.7.6.7.1.1 |
mgnt2PlugInRinvPlug-in RI:This OID gives the remote inventory of the plug-inro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.7.1.2 |
mgnt2PollingPresentPolling present:This OID gives the presence of the polling plug-inro EkiPlugInState .1.3.6.1.4.1.20044.7.6.7.1.3 |
mgnt2SnmpPresentSnmp present:This OID gives the presence of the snmp plug-inro EkiPlugInState .1.3.6.1.4.1.20044.7.6.7.1.4 |
mgnt2RinvBackpanelBackpanel inventory:This OID gives the Backpanel inventory of the chassisrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.8 |
mgnt2RinvFanFan inventory:This OID gives the fan inventory of the chassisrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.9 |
mgnt2RinvUbootU-Boot inventory:This OID gives the U-Boot inventoryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.6.10 |
mgnt2ErrorCounters OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.7 |
mgnt2GigmErrorCounterTableList of error counters SEQUENCE OF Mgnt2GigmErrorCounterEntry .1.3.6.1.4.1.20044.7.7.1 |
mgnt2GigmErrorCounterEntryRow Definition for the error counters table Mgnt2GigmErrorCounterEntry .1.3.6.1.4.1.20044.7.7.1.1 |
mgnt2IndexErrorCounterIndex for error counters tablero Integer32 .1.3.6.1.4.1.20044.7.7.1.1.1 |
mgnt2ErrorCounterSlotNumberSlot number:This OID gives the slot number for the corresponding counterro Integer32 .1.3.6.1.4.1.20044.7.7.1.1.2 |
mgnt2ErrorCounterValueCount value:This OID gives the value of the error counterro Integer32 .1.3.6.1.4.1.20044.7.7.1.1.3 |
mgnt2GigmResetErrorCountersReset error counters:This OID reset the error counters to 0rw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.7.2 |
mgnt2Perf OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.8 |
mgnt2PerfCapabilityTableList of Perf capability of PMs plugged in the Chassis SEQUENCE OF Mgnt2PerfCapabilityEntry .1.3.6.1.4.1.20044.7.8.1 |
mgnt2PerfCapabilityEntryRow Definition for the Perf capability table Mgnt2PerfCapabilityEntry .1.3.6.1.4.1.20044.7.8.1.1 |
mgnt2PerfCapIndexBoardsIndex for Perf cap tablero Integer32 .1.3.6.1.4.1.20044.7.8.1.1.1 |
mgnt2PerfCapPositionPM Slot number:This OID gives the slot number in which the PM is pluggedro Integer32 .1.3.6.1.4.1.20044.7.8.1.1.2 |
mgnt2PerfCapNamePM name:This OID gives the name of the PM plugged in the Mgnt2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.20044.7.8.1.1.3 |
mgnt2PerfCapStatusStatus of the perf cap:This OID gives the capability of the pm to do performancero EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.8.1.1.4 |
mgnt2PerfCapOidEnableOID of the object perf enable:This OID gives the OID of the perf enable object of the correspondind mib of the modulero OBJECT IDENTIFIER .1.3.6.1.4.1.20044.7.8.1.1.5 |
mgnt2GigmPerf15minSync15 min sync perf : this oid send a 15min sync to all modulesrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.8.2 |
mgnt2GigmPerf24hSync15 min sync perf : this oid send a 24h sync to all modulesrw EkiOnOff (EKINOPS-MIB) .1.3.6.1.4.1.20044.7.8.3 |
mgnt2PerfResyncNMSResync Perf : this oid allows to create an historical perf file for all modulesrw Mgnt2PerfResyncValues .1.3.6.1.4.1.20044.7.8.4 |