DiagnosticsMonitor
AI MIB Summary
Standard SNMP MIB module defining data structures for DiagnosticsMonitor.
45
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
45 total| Object Name |
|---|
concord OBJECT IDENTIFIER .1.3.6.1.4.1.149 |
RFC1155-SMI Unknown .1.3.6.1.4.1.149 |
netHealthInfoAn event (not an error) has occurred in Network Health.
This trap is an informational message from the Network Health
Diagnostic Monitor. No action is required. TRAP-TYPE .1.3.6.1.4.1.149.0.15 |
netHealthWarningAn error has occurred in Network Health.
Polling will continue, please investigate as
soon as possible. This trap is sent from the Network Health
Diagnostic Monitor. TRAP-TYPE .1.3.6.1.4.1.149.0.16 |
netHealthResetA system critical error has occurred in Network Health.
Polling may not occur. Restart the Network Health servers as
soon as possible. This trap is sent from the Network Health
Diagnostic Monitor. TRAP-TYPE .1.3.6.1.4.1.149.0.17 |
netHealthUrgentA system critical error has occurred in Network Health.
Polling may not occur. System administrator intervention
is required. This trap is sent from the Network Health
Diagnostic Monitor. TRAP-TYPE .1.3.6.1.4.1.149.0.18 |
netHealthExceptionA scheduled Network Health report has detected one or more health
exceptions for an element. TRAP-TYPE .1.3.6.1.4.1.149.0.19 |
nhLiveExceptionA Network Health exception has occurred. This trap
sends generic information about an exception when it first becomes
active. TRAP-TYPE .1.3.6.1.4.1.149.0.20 |
nhLiveAlarmA Network Health alarm has occurred. This trap
sends detailed information about an alarm. TRAP-TYPE .1.3.6.1.4.1.149.0.21 |
nhLiveClearExceptionA Network Health exception has been cleared. The conditions causing
the corresponding exception no longer exist. TRAP-TYPE .1.3.6.1.4.1.149.0.22 |
nhLiveClearAlarmA Network Health alarm has been cleared. The conditions causing
the corresponding alarm no longer exist. TRAP-TYPE .1.3.6.1.4.1.149.0.23 |
nhLiveUpdateExceptionThe severity of a Network Health exception has changed. TRAP-TYPE .1.3.6.1.4.1.149.0.24 |
nhLiveResetExceptionsThe LiveExceptions server has restarted. All LiveExceptions alarms
and exceptions sent before this time will NOT be cleared automatically. All trap
destinations should reset any pre-existing Network Health exceptions
and alarms by setting them to a clear state or unhighlighting
any icons. TRAP-TYPE .1.3.6.1.4.1.149.0.25 |
netHealth OBJECT IDENTIFIER .1.3.6.1.4.1.149.2 |
netHealthMib OBJECT IDENTIFIER .1.3.6.1.4.1.149.2.1 |
nhdTraps OBJECT IDENTIFIER .1.3.6.1.4.1.149.2.1.1 |
nhdServer OBJECT IDENTIFIER .1.3.6.1.4.1.149.2.1.1.1 |
nhdServerIpThis object is the IP address of the element that has the exception.ro IpAddress .1.3.6.1.4.1.149.2.1.1.1.1 |
nhdServerNameThis object is the name of the element that has the exception.ro OCTET STRING .1.3.6.1.4.1.149.2.1.1.1.2 |
nhdError OBJECT IDENTIFIER .1.3.6.1.4.1.149.2.1.1.2 |
nhdErrorDateThis object is the date the exception occurred.ro OCTET STRING .1.3.6.1.4.1.149.2.1.1.2.1 |
nhdErrorTimeThis object is the time the exception occurred.ro OCTET STRING .1.3.6.1.4.1.149.2.1.1.2.2 |
nhdErrorCodeThis object is the variable that has caused the exception.ro OCTET STRING .1.3.6.1.4.1.149.2.1.1.2.3 |
nhdErrorMessageThis object describes the reason for the exception.ro OCTET STRING .1.3.6.1.4.1.149.2.1.1.2.5 |
nhSysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.149.2.2 |
nhServerIpThis object specifies the IP address of the
Network Health server.ro IpAddress .1.3.6.1.4.1.149.2.2.1 |
nhServerNameThis object specifies the name of the
Network Health server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.2.2 |
nhServerPortThis object specifies the port number of the
Network Health server.ro INTEGER .1.3.6.1.4.1.149.2.2.3 |
nhArgs OBJECT IDENTIFIER .1.3.6.1.4.1.149.2.3 |
nhElementIpThis object specifies the IP address of a
Network Health element.ro IpAddress .1.3.6.1.4.1.149.2.3.1 |
nhElementNameThis object specifies the name of a
Network Health element.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.2 |
nhElementIdThis object specifies the database identifier of a Network Health
element.ro INTEGER .1.3.6.1.4.1.149.2.3.3 |
nhStartTimeThis object is the UTC time that the exception or alarm was
detected by LiveExceptions.ro INTEGER .1.3.6.1.4.1.149.2.3.4 |
nhExceptionTypeThis object specifies the algorithm(s) used to detect the
alarm. They could include Time Over Threshold,
Deviation From Normal, Dynamic Threshold, Availability < 100%
and Reachability < 100%.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.5 |
nhVariableThis object defines the variable(s) used in the rule
that created the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.6 |
nhSeverityThis object is the severity level of the alarm. The user
can view/modify the severity of a rule in the LiveExceptions
Rule Editor.ro Enumeration .1.3.6.1.4.1.149.2.3.7 |
nhGroupThis object defines the group that LiveExceptions is monitoring and
that contains the element that has an alarm or exception. This object
value will be blank if LiveExceptions is monitoring a group list.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.8 |
nhGroupListThis object defines the group list that LiveExceptions is monitoring and
that contains the element that has an alarm or exception. This object
value will be blank if LiveExceptions is monitoring a group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.9 |
nhDisplayStrThis object describes the rule which triggered the alarm. This field
is blank for exceptions. The Rule Message can be viewed/modified
in the LiveExceptions Rule Editor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.10 |
nhExceptionIdThis object defines a unique ID for the exception (Profile ID)
or the alarm (Alarm ID). It is used to run Network Health reports.ro INTEGER .1.3.6.1.4.1.149.2.3.11 |
nhTechTypeThis object defines the technology type of the group or group list.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.12 |
nhResetTimeThis object is the UTC time that the LiveExceptions server started.ro INTEGER .1.3.6.1.4.1.149.2.3.13 |
nhProfileThis object is the name of the profile for this alarm or exception.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.149.2.3.14 |
nhProblemStartTimeThis object is the UTC time when the threshold was first crossed and
that later resulted in an alarm or exception for that element.ro INTEGER .1.3.6.1.4.1.149.2.3.15 |
nhProblemDurationThis object is the amount of time (in seconds) spent over the
threshold since the problem start time (the time the threshold was
first crossed).ro INTEGER .1.3.6.1.4.1.149.2.3.16 |