DPS-TEXT-RTU-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
Imported Objects
Objects
21 total| Object Name |
|---|
dpsTEXTRTUv2 OBJECT IDENTIFIER .1.3.6.1.4.1.2682.1.5 |
SNMPv2-TC Unknown .1.3.6.1.4.1.2682.1.5 |
SNMPv2-SMI NOTIFICATION-TYPE .1.3.6.1.4.1.2682.1.5 |
dpsTEXTRTUv2Ident OBJECT IDENTIFIER .1.3.6.1.4.1.2682.1.5.1 |
dpsTEXTRTUv2DateTimeThe RTU system date and time.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2682.1.5.1.1 |
dpsTEXTRTUv2DeviceTypeDevice type of far end SMS device as received in SMS messages to SMS receiver. ie NG216_G3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2682.1.5.1.2 |
dpsTEXTRTUv2PhoneThe phone number of the far end or originating SMS RTU, only SMS RTUs will have/respond to this variablero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2682.1.5.1.3 |
dpsTEXTRTUv2AlarmGrid OBJECT IDENTIFIER .1.3.6.1.4.1.2682.1.5.2 |
dpsTEXTRTUv2ADisplayTEXT RTU display number. See the usermanual for display mapping informationro Integer32 .1.3.6.1.4.1.2682.1.5.2.1 |
dpsTEXTRTUv2APointTEXT RTU point number. See the usermanual for point mapping informationro Integer32 .1.3.6.1.4.1.2682.1.5.2.2 |
dpsTEXTRTUv2APntDescA description of this point.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2682.1.5.2.3 |
dpsTEXTRTUv2AStateThe current state of this point.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2682.1.5.2.4 |
dpsTEXTRTUAnalogvalueThe current value of the channel. Will be blank if alarm is not from an analog sourcero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2682.1.5.2.5 |
dpsTEXTRTUAnalogthresholdsHighest threshold level crossed, if MJ, MN is assumed. Will be blank if alarm is not from an analog sourcesro AnalogThresholds .1.3.6.1.4.1.2682.1.5.2.6 |
dpsTEXTRTUv2ControlGrid OBJECT IDENTIFIER .1.3.6.1.4.1.2682.1.5.3 |
dpsTEXTRTUv2CDisplayRTU_port_address display number.rw Integer32 .1.3.6.1.4.1.2682.1.5.3.1 |
dpsTEXTRTUv2CPointRTU_port_display point number (1-64).rw Integer32 .1.3.6.1.4.1.2682.1.5.3.2 |
dpsTEXTRTUv2CMOMTimeMomentary latch time (in milliseconds). If value is blank, the default of 600ms will be usedrw Integer32 .1.3.6.1.4.1.2682.1.5.3.3 |
dpsTEXTRTUv2CActionRequested action. Latch, release, and momentary will affect relays. Sync(s) will resend traps for currently active alarms(TEXT RTU will ignore if invalid).rw RTUCAction .1.3.6.1.4.1.2682.1.5.3.4 |
dpsTEXTRTUv2AlarmSetGenerated when alarm is received from far end SMS device to SMS receiver. NOTIFICATION-TYPE .1.3.6.1.4.1.2682.1.5.100 |
dpsTEXTRTUv2AlarmClearGenerated when clear is received from far end SMS device to SMS receiver. NOTIFICATION-TYPE .1.3.6.1.4.1.2682.1.5.200 |
More MIBs from DPS Telecom
Browse all DPS TelecomMIBs →Standard SNMP MIB module defining data structures for DPS-MIB-NMT2SA-V10A-V2.
Standard SNMP MIB module defining data structures for DPS-MIB-NMT2SB-V10A-V2.
Standard SNMP MIB module defining data structures for DPS-MIB-NMT2SB-V10A.
Standard SNMP MIB module defining data structures for DPS-MIB-NMT2SA-V10A.
The DPS-MIB-RTDX-G39-V2 module enables SNMP-based monitoring and management of DPS Telecom RTDX G39 digital cross-connect systems, specifically exposing performance counters for circuit status, alarm states, and traffic statistics across T1/E1 and DS1/DS3 interfaces. This second-generation implementation provides granular visibility into port-level throughput, error rates, and synchronization health for network operations centers managing legacy TDM transport infrastructure.
SNMP MIB module