DPI-LANA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DPI-LANA-MIB.
26
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
dpi OBJECT IDENTIFIER .1.3.6.1.4.1.901 |
RFC1155-SMI Unknown .1.3.6.1.4.1.901 |
dpiProducts OBJECT IDENTIFIER .1.3.6.1.4.1.901.1 |
dpiLANA OBJECT IDENTIFIER .1.3.6.1.4.1.901.1.2 |
lanaInterface OBJECT IDENTIFIER .1.3.6.1.4.1.901.1.2.2 |
lanaRs232PortSpeedThe port's speed.rw Enumeration .1.3.6.1.4.1.901.1.2.2.1 |
lanaRs232AsyncPortBitsThe number of data bits for the serial port.rw Enumeration .1.3.6.1.4.1.901.1.2.2.2 |
lanaRs232AsyncPortStopBitsThe number of stop bits for the serial port.rw Enumeration .1.3.6.1.4.1.901.1.2.2.3 |
lanaRs232AsyncPortParityThe parity setting of the serial line.rw Enumeration .1.3.6.1.4.1.901.1.2.2.4 |
lanaSubnetMaskThe subnet mask for the LANA unit.rw IpAddress .1.3.6.1.4.1.901.1.2.2.5 |
lanaDefGatewayIpAddrThe default gateway IP address for the LANA unit.rw IpAddress .1.3.6.1.4.1.901.1.2.2.6 |
lanaForwBroadcastIndicates whether the SNMP LAN
Adapter forwards broadcast datagrams
to the SNMP-managed device. The
factory default value is disabled (2).rw Enumeration .1.3.6.1.4.1.901.1.2.2.7 |
lanaMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.901.1.2.3 |
lanaResetRequest for LANA unit to reset.rw Enumeration .1.3.6.1.4.1.901.1.2.3.1 |
lanaFactoryDefaultRequest factory default configuration on next unit reset.rw Enumeration .1.3.6.1.4.1.901.1.2.3.2 |
lanaUpdateUnitRequest for LANA unit to initiate TFTP software upgrade using
the string `host:filename' where host is in dotted decimal format.rw Enumeration .1.3.6.1.4.1.901.1.2.3.3 |
lanaSWMajorVerLANA's major software release version number.ro INTEGER .1.3.6.1.4.1.901.1.2.3.4 |
lanaSWMinorVerLANA's minor software release version number.ro INTEGER .1.3.6.1.4.1.901.1.2.3.5 |
lanaSWRevisionLANA's software release revision number.ro INTEGER .1.3.6.1.4.1.901.1.2.3.6 |
lanaNest OBJECT IDENTIFIER .1.3.6.1.4.1.901.1.2.4 |
lanaIPAddrTableTotalGet the number of entries in LANA's nest ip table.ro INTEGER .1.3.6.1.4.1.901.1.2.4.1 |
lanaIPAddrTableA list of entries containing IP address information
for LANA managed by this system. SEQUENCE OF LanaIPAddrEntry .1.3.6.1.4.1.901.1.2.4.2 |
lanaIPAddrEntryAn entry containing IP address information for a particular LANA table
slot. LanaIPAddrEntry .1.3.6.1.4.1.901.1.2.4.2.1 |
lanaIPAddrIndexA unique value for each LANA IP address.ro INTEGER .1.3.6.1.4.1.901.1.2.4.2.1.1 |
lanaIPAddrThis variable is one of up to 60 IP addresses that LANA will proxy
ARP for. The address should be on the same subnet as the attached
CSU/DSU in order for ARP to function properly.
Reading an IP address with the value 0.0.0.0 represents a cleared/
uninitialized table entry.
Setting the IP address to 0.0.0.0 clears the indexed entry.rw IpAddress .1.3.6.1.4.1.901.1.2.4.2.1.2 |
lanaIPAddrTableClearReset all the IP addresses in LANA's address table to 0.0.0.0.rw INTEGER .1.3.6.1.4.1.901.1.2.4.3 |