DOT1X-ADVANCED-FEATURES-MIB
The DOT1X-ADVANCED-FEATURES-MIB provides vendor-specific monitoring and management capabilities for IEEE 802.1X authentication sessions on network access devices, exposing advanced metrics such as re-authentication states, dynamic VLAN assignment results, and specific failure counters not covered by standard MIBs. This module enables granular troubleshooting of port-based network access control (PNAC) policies and detailed visibility into the operational state of 802.1X supplicant interactions on the network edge.
Imported Objects
Objects
22 total| Object Name |
|---|
dot1xAdvancedThe Private MIB for Dot1x Advanced Features MODULE-IDENTITY .1.3.6.1.4.1.738.1.5.36 |
agentGuestVlanConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.36.1 |
agentGuestVlanSupplModeMode showing whether at the global level,Guest VLAN Supplicant Mode is
enabled or not.rw Enumeration .1.3.6.1.4.1.738.1.5.36.1.1 |
agentDot1xGuestVlanPortConfigTableA table for Guest Vlan and associated functionality. SEQUENCE OF AgentDot1xGuestVlanPortConfigEntry .1.3.6.1.4.1.738.1.5.36.1.2 |
agentDot1xGuestVlanPortConfigEntryRepresents entry for guest config table. AgentDot1xGuestVlanPortConfigEntry .1.3.6.1.4.1.738.1.5.36.1.2.1 |
agentDot1xGuestVlanIdSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.rw Unsigned32 .1.3.6.1.4.1.738.1.5.36.1.2.1.1 |
agentDot1xGuestVlanPeriodThe value, in seconds, of the guestVlanPeriod constant
currently in use for Guest Vlan Assignment for the
interface .rw Unsigned32 .1.3.6.1.4.1.738.1.5.36.1.2.1.2 |
agentDot1xEnhancementConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.36.2 |
agentDot1xRadiusVlanAssignmentEnable/Disable dot1x Vlan Assignment Support on the switch.rw Enumeration .1.3.6.1.4.1.738.1.5.36.2.1 |
agentDot1xDynamicVlanCreationModeEnable/Disable dot1x dynamic vlan creation Support on the switch.rw Enumeration .1.3.6.1.4.1.738.1.5.36.2.2 |
agentDot1xClientGroup OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.5.36.3 |
agentDot1xClientTableA table for Guest Vlan and associated functionality. SEQUENCE OF AgentDot1xClientEntry .1.3.6.1.4.1.738.1.5.36.3.1 |
agentDot1xClientEntryRepresents entry for guest config table. AgentDot1xClientEntry .1.3.6.1.4.1.738.1.5.36.3.1.1 |
agentDot1xClientLogicalInterfaceSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro Unsigned32 .1.3.6.1.4.1.738.1.5.36.3.1.1.1 |
agentDot1xClientInterfaceSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.36.3.1.1.2 |
agentDot1xClientUsernameSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.36.3.1.1.3 |
agentDot1xClientMacAddressSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.738.1.5.36.3.1.1.4 |
agentDot1xClientSessionTimeSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro Unsigned32 .1.3.6.1.4.1.738.1.5.36.3.1.1.5 |
agentDot1xClientVlanIdSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro Unsigned32 .1.3.6.1.4.1.738.1.5.36.3.1.1.6 |
agentDot1xClientVlanAssignedSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro Enumeration .1.3.6.1.4.1.738.1.5.36.3.1.1.7 |
agentDot1xClientSessionTimeoutSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro Unsigned32 .1.3.6.1.4.1.738.1.5.36.3.1.1.8 |
agentDot1xClientSessionTerminationActionSpecifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.ro Enumeration .1.3.6.1.4.1.738.1.5.36.3.1.1.9 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →SNMP MIB module
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
SNMP MIB module
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.