DLB-802DOT11-EXT-MIB
The DLB-802DOT11-EXT-MIB extends standard IEEE 802.11 management capabilities for Deliberant wireless access points to expose vendor-specific operational parameters, including proprietary radio statistics, client association states, and interference metrics not covered by the standard Wlan-MIB.
Imported Objects
Objects
45 total| Object Name |
|---|
dlb802dot11ExtMIBThe Deliberant 802.11 Extension MIB. MODULE-IDENTITY .1.3.6.1.4.1.32761.3.5 |
dlb802dot11ExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.32761.3.5.1 |
dlbDot11Notifs OBJECT IDENTIFIER .1.3.6.1.4.1.32761.3.5.1.0 |
dlbFrequencyChangeThis notification is sent on frequency change. NOTIFICATION-TYPE .1.3.6.1.4.1.32761.3.5.1.0.1 |
dlbNoiseThresholdReachedThis notification is sent when noise becomes bigger than threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.32761.3.5.1.0.2 |
dlbRemoteNodeConnectedThis notification is sent when remote node associates. NOTIFICATION-TYPE .1.3.6.1.4.1.32761.3.5.1.0.3 |
dlbRemoteNodeDisconnectedThis notification is sent when remote node dissasociates. NOTIFICATION-TYPE .1.3.6.1.4.1.32761.3.5.1.0.4 |
dlbLinkQualThresholdReachedThis notification is sent when link quality crosses the specified threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.32761.3.5.1.0.5 |
dlbDot11Info OBJECT IDENTIFIER .1.3.6.1.4.1.32761.3.5.1.1 |
dlbDot11Conf OBJECT IDENTIFIER .1.3.6.1.4.1.32761.3.5.1.2 |
dlbDot11IfConfTableWireless interface configuration table. SEQUENCE OF DlbDot11IfConfEntry .1.3.6.1.4.1.32761.3.5.1.2.1 |
dlbDot11IfConfEntryWireless interface configuration table entry. DlbDot11IfConfEntry .1.3.6.1.4.1.32761.3.5.1.2.1.1 |
dlbDot11IfParentIndexWireless interface's parent index, which corresponds to ifIndex in MIB-II interfaces table. This is only applicable if the interface is virtual and it is created under some other interface, like it is for Atheros cards when using MadWiFi driver, where parent interfaces are wifi0, wifi1, etc.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.32761.3.5.1.2.1.1.1 |
dlbDot11IfProtocolProtocol string, for example 'IEEE 802.11g'.ro OCTET STRING .1.3.6.1.4.1.32761.3.5.1.2.1.1.2 |
dlbDot11IfModeWireless interface operation modero Enumeration .1.3.6.1.4.1.32761.3.5.1.2.1.1.3 |
dlbDot11IfESSIDESSIDro OCTET STRING .1.3.6.1.4.1.32761.3.5.1.2.1.1.4 |
dlbDot11IfAccessPointAccess point's MAC address if working in managed mode and connected. Current interface's MAC address, when working in master mode.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.32761.3.5.1.2.1.1.5 |
dlbDot11IfCountryCodeCountry code.ro Integer32 .1.3.6.1.4.1.32761.3.5.1.2.1.1.6 |
dlbDot11IfFrequencyCurrent frequency as reported by driver.ro Integer32 UNITS "MHz" .1.3.6.1.4.1.32761.3.5.1.2.1.1.7 |
dlbDot11IfChannelChannel number.ro Integer32 .1.3.6.1.4.1.32761.3.5.1.2.1.1.8 |
dlbDot11IfChannelBandwidthChannel bandwidth.ro Integer32 UNITS "MHz" .1.3.6.1.4.1.32761.3.5.1.2.1.1.9 |
dlbDot11IfTxPowerTransmit power in dBm.ro Gauge32 UNITS "dBm" .1.3.6.1.4.1.32761.3.5.1.2.1.1.10 |
dlbDot11IfBitRateTransmission bitrate.ro Gauge32 UNITS "kbit/s" .1.3.6.1.4.1.32761.3.5.1.2.1.1.11 |
dlbDot11IfLinkQualityLink quality value.ro Gauge32 .1.3.6.1.4.1.32761.3.5.1.2.1.1.12 |
dlbDot11IfMaxLinkQualityMaximum possible link quality value for current wireless card.ro Gauge32 .1.3.6.1.4.1.32761.3.5.1.2.1.1.13 |
dlbDot11IfSignalLevelSignal level.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.32761.3.5.1.2.1.1.14 |
dlbDot11IfNoiseLevelNoise level.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.32761.3.5.1.2.1.1.15 |
dlbDot11IfAssocNodeCountNumber of associated nodes when working in access point mode. 1 - if associated to remote access point in client mode.ro Gauge32 .1.3.6.1.4.1.32761.3.5.1.2.1.1.16 |
dlbDot11Stats OBJECT IDENTIFIER .1.3.6.1.4.1.32761.3.5.1.3 |
dlbDot11IfErrStatsTableWireless interface statistics table. SEQUENCE OF DlbDot11IfErrStatsEntry .1.3.6.1.4.1.32761.3.5.1.3.1 |
dlbDot11IfErrStatsEntryWireless interface statistics table entry. DlbDot11IfErrStatsEntry .1.3.6.1.4.1.32761.3.5.1.3.1.1 |
dlbDot11IfRxInvalidNWIDNumber of received packets with invalid NWID/ESSID. Increasing value usually means that there are other stations transmitting on the same channel or adjacent channels.ro Counter32 .1.3.6.1.4.1.32761.3.5.1.3.1.1.1 |
dlbDot11IfRxInvalidCryptNumber of received packets the hardware was unable to decrypt.ro Counter32 .1.3.6.1.4.1.32761.3.5.1.3.1.1.2 |
dlbDot11IfRxInvalidFragNumber of received packets that were missing link layer fragments for complete re-assembly.ro Counter32 .1.3.6.1.4.1.32761.3.5.1.3.1.1.3 |
dlbDot11IfTxExcessiveRetriesNumber of packets hardware failed to deliver.ro Counter32 .1.3.6.1.4.1.32761.3.5.1.3.1.1.4 |
dlbDot11IfInvalidMiscOther packets lost in relation with specific wireless operations.ro Counter32 .1.3.6.1.4.1.32761.3.5.1.3.1.1.5 |
dlbDot11IfMissedBeaconsNumber of beacons that should have been sent by remote access point but were not received. Increasing number usually means that communicating peers moved out of range.ro Counter32 .1.3.6.1.4.1.32761.3.5.1.3.1.1.6 |
dlbDot11RemoteNodeStatsTableRemote node statistics table. This table shows statistics for associated or already disconnected clients on wireless interfaces which are operating in access point mode. For interfaces operating in client mode and associated to remote access point information about access point is shown. SEQUENCE OF DlbDot11RemoteNodeStatsEntry .1.3.6.1.4.1.32761.3.5.1.3.2 |
dlbDot11RemoteNodeStatsEntryWireless remote node statistics table entry. DlbDot11RemoteNodeStatsEntry .1.3.6.1.4.1.32761.3.5.1.3.2.1 |
dlbDot11RmtNodeMacAddressRemote node MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.32761.3.5.1.3.2.1.1 |
dlbDot11RmtNodeAssociatedRemote node is currently associated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.32761.3.5.1.3.2.1.2 |
dlbDot11RmtNodeTxBytesBytes transmitted to remote node. This object is optional.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.32761.3.5.1.3.2.1.3 |
dlbDot11RmtNodeRxBytesBytes received from remote node. This object is optional.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.32761.3.5.1.3.2.1.4 |
dlbDot11RmtNodeAssocTimeUNIX timestamp of the association. This object is optional.ro Integer32 .1.3.6.1.4.1.32761.3.5.1.3.2.1.5 |
dlbDot11RmtNodeDisassocTimeUNIX timestamp of the disassociation (if remote node recently dissasociated). This object is optional.ro Integer32 .1.3.6.1.4.1.32761.3.5.1.3.2.1.6 |
More MIBs from Deliberant
Browse all DeliberantMIBs →The DLB-ATHDRV-STATS-MIB module provides SNMP-accessible counters for monitoring Atheros wireless driver performance and operational statistics, including packet transmission/reception rates, error counts, and interface utilization metrics.
The DLB-RADIO3-DRV-MIB provides SNMP management interfaces for Deliberant 3-series radio drivers, exposing operational metrics such as interface status, transmission statistics, signal quality indicators, and driver-level error counters. This module enables the monitoring of radio link health, throughput performance, and hardware state transitions for Deliberant's wireless communication infrastructure.
The DLB-GENERIC-MIB provides vendor-specific extensions for monitoring and managing Deliberant load balancer systems, exposing generic operational metrics such as device status, interface statistics, and session state counters. This module enables centralized SNMP polling of core load balancing parameters to facilitate real-time health assessment and performance troubleshooting across Deliberant hardware platforms.
The DELIBERANT-MIB facilitates the remote configuration and status monitoring of Deliberant Systems' central management infrastructure, specifically exposing parameters for device provisioning, policy enforcement, and system state validation within their network security or traffic management appliances.