Home/Catalog/DIGIPDU-MIB

DIGIPDU-MIB

AI MIB Summary

The DIGIPDU-MIB module provides SNMP-based monitoring and management capabilities for Schneider Electric's Digital Power Distribution Units (PDUs), exposing granular metrics including voltage, current, power consumption, temperature, and relay status for each outlet. This MIB enables centralized telemetry collection for power infrastructure health, load balancing, and environmental threshold alerting within data center environments.

This is the MIB module for the All DIGIPDU Device
Main OID:
smart.1.3.6.1.4.1.10456.3
233
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
RFC-1215

Objects

233 total
Object Name
digipdu
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456
smartThis is the MIB module for the All DIGIPDU Device
MODULE-IDENTITY
.1.3.6.1.4.1.10456.3
product
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.1
productModelIndicate the Model of Device.ro
DisplayString
.1.3.6.1.4.1.10456.3.1.1
productPartNumberThe part number of this appliance as shown on the label.ro
DisplayString
.1.3.6.1.4.1.10456.3.1.2
productSerialNumberThe serial number of this appliance as shown on the label.ro
DisplayString
.1.3.6.1.4.1.10456.3.1.3
productFirmwareVersionThe version of the firmware of this product.ro
DisplayString
.1.3.6.1.4.1.10456.3.1.4
productTemperatureKindTemperature Kind(0:CELSIUS, 1:FAHRENHEIT).ro
INTEGER
.1.3.6.1.4.1.10456.3.1.11
productResetDetectorDisplay the Nearest Operated Time of Reset Buttom.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.1.21
deviceTable
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.2
deviceATSKindDevice ATS Kind.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.1
deviceInFeedTotalInput Feed Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.2
deviceInFeedKindInput Feed Kind.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.3
deviceInFeedBranchInput Feed Kind.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.4
deviceOutTotalOut Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.5
deviceOutKindOut Kind.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.6
deviceInbuiltTempTotalInbuilt Temperature Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.7
deviceExtendTemperatureTotalExtend ENV Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.8
deviceExtendRHTotalExtend ENV Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.9
devicePDUTotalPDU Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.10
deviceInputTotalInput Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.11
deviceUPSUPS.ro
Enumeration
.1.3.6.1.4.1.10456.3.2.12
deviceDaisyChainDaisy Chain.ro
Enumeration
.1.3.6.1.4.1.10456.3.2.13
deviceUnitTotalDevice Unit Total.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.20
deviceUnitTableThe table of Device Unit.
SEQUENCE OF DeviceUnitEntry
.1.3.6.1.4.1.10456.3.2.21
deviceUnitEntryRow definition for Device Unit table.
DeviceUnitEntry
.1.3.6.1.4.1.10456.3.2.21.1
deviceUnitIndexDevice Unit table index.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.21.1.1
deviceUnitStatusstatus in the Device Unit.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.21.1.2
deviceUnitInfeedTotalInfeed Total of Device Unit.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.21.1.3
deviceUnitOutTotalOut Total of Device Unit.ro
INTEGER
.1.3.6.1.4.1.10456.3.2.21.1.4
peripheralTables
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.3
aTSTableThe table of Auto Transfer Switch.
SEQUENCE OF ATSEntry
.1.3.6.1.4.1.10456.3.3.1
aTSEntryRow definition for Input Feed table.
ATSEntry
.1.3.6.1.4.1.10456.3.3.1.1
aTSIndexAuto Transfer Switch table index.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.1.1.1
aTSStatusstatus in the Auto Transfer Switch.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.1.1.2
aTSVoltageVoltage of Auto Transfer Switch.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.1.1.3
aTSFrequencyFrequency of Auto Transfer Switch.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.1.1.4
inFeedTableThe table of Input Feed.
SEQUENCE OF InFeedEntry
.1.3.6.1.4.1.10456.3.3.2
inFeedEntryRow definition for Input Feed table.
InFeedEntry
.1.3.6.1.4.1.10456.3.3.2.1
inFeedIndexInput Feed table index.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.1
inFeedStatusstatus in the Input Feed.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.2
inFeedVoltageVoltage of Input Feed.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.3
inFeedFrequencyFrequency of Input Feed.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.4
inFeedCurrentTotal Current of Input Feed(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.5
inFeedPowerLoadActual value of power in the Input Feed.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.6
inFeedPowerFactorActual value of power factor in the Input Feed.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.7
inFeedPowerEnergyActual value of energy in the Input Feed.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.8
inFeedOverLoadOverLoad of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.9
inFeedHighWarningHigh Warning of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.10
inFeedLowWarningLow Warning of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.11
inFeedBranchAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.12
inFeedBranch1CurrentAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.13
inFeedBranch1PowerLoadActual value of power in the PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.14
inFeedBranch1PowerFactorActual value of power factor in the PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.15
inFeedBranch1OverLoadOverLoad of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.16
inFeedBranch1HighWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.17
inFeedBranch1LowWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.18
inFeedBranch2CurrentAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.19
inFeedBranch2PowerLoadActual value of power in the PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.20
inFeedBranch2PowerFactorActual value of power factor in the PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.21
inFeedBranch2OverLoadOverLoad of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.22
inFeedBranch2HighWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.23
inFeedBranch2LowWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.2.1.24
outTableThe table of Outlet.
SEQUENCE OF OutletEntry
.1.3.6.1.4.1.10456.3.3.3
outEntryRow definition for Outlet table.
OutletEntry
.1.3.6.1.4.1.10456.3.3.3.1
outIndexOut table index.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.1
outComputerStatusOut computer status.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.2
outCurrentStatusOut Current status.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.3
outSwitchStatusThis OID is provided for Outlet Status information. '0' if the out is Switch Off. '1' if the out is Switch On. '2' if the out is Switch Off Acting. '3' if the out is Switch On Acting.ro
Enumeration
.1.3.6.1.4.1.10456.3.3.3.1.4
outSwitchCtrlThis OID is provided for Outlet Status information. '0' if the out is None. '1' Switch Ctrl On. '2' Switch Ctrl Off. '3' Switch Ctrl Reboot. '4' Switch Ctrl On Off.rw
Enumeration
.1.3.6.1.4.1.10456.3.3.3.1.5
outVoltageVoltage of Outlet.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.6
outCurrentCurrent of Outlet(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.7
outPowerFactorActual value of power factor in the Outlet.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.8
outPowerLoadActual value of power in the Outlet.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.9
outOverloadOverload of Outlet(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.10
outHighWarningHigh Warning of Outlet(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.11
outLowWarningLow Warning of Outlet(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.3.1.12
pduTablesThe table of PDU.
SEQUENCE OF PDUEntry
.1.3.6.1.4.1.10456.3.3.4
pduEntryRow definition for PDU table.
PDUEntry
.1.3.6.1.4.1.10456.3.3.4.1
pduIndexPDU table index.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.1
pduModelNow Power Data Log of PDU(In tenths of amps, divide by 10 for value in amps).ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.4.1.2
pduMonitorPDU Monitor Status.rw
Enumeration
.1.3.6.1.4.1.10456.3.3.4.1.3
pduStatusPDU Connect Status.ro
Enumeration
.1.3.6.1.4.1.10456.3.3.4.1.4
pduVoltageVoltage of PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.5
pduFrequencyFrequency of PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.6
pduCurrentTotal Current of PDU(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.7
pduPowerLoadActual value of power in the PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.8
pduPowerFactorActual value of power factor in the PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.9
pduPowerEnergyActual value of power in the PDU.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.10
pduOverloadOverload of PDU(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.11
pduHighWarningHigh Warning of PDU(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.12
pduLowWarningHigh Warning of PDU(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.13
pduBranchAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.14
pduBranch1CurrentAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.15
pduBranch1OverloadOverload of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.16
pduBranch1HighWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.17
pduBranch1LowWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.18
pduBranch2CurrentAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).ro
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.19
pduBranch2OverloadOverload of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.20
pduBranch2HighWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.21
pduBranch2LowWarningAverage Current of Input Feed(In tenths of amps, divide by 10 for value in amps).rw
INTEGER
.1.3.6.1.4.1.10456.3.3.4.1.22
inbuiltTemperatureTableThe table of Inbuilt Temperature Sensor.
SEQUENCE OF InbuiltTemperatureEntry
.1.3.6.1.4.1.10456.3.3.5
inbuiltTemperatureEntryRow definition for Inbuilt Temperature Sensor table.
InbuiltTemperatureEntry
.1.3.6.1.4.1.10456.3.3.5.1
inbuiltTemperatureIndexIndex for the Inbuilt Temperature Sensor table.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.5.1.1
inbuiltTemperatureStatusInbuilt Temperature Sensor Connect Status.ro
Enumeration
.1.3.6.1.4.1.10456.3.3.5.1.2
inbuiltTemperatureDetected Temperature from Inbuilt Temperature Sensor.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.5.1.3
inbuiltTemperatureHighWarningHigh Warning Temperature from Inbuilt Temperature Sensor.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.5.1.4
inbuiltTemperatureLowWarningLow Warning Temperature from Inbuilt Temperature Sensor.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.5.1.5
extendTemperatureTableThe table of Extend Temperature Sensor.
SEQUENCE OF ExtendTemperatureEntry
.1.3.6.1.4.1.10456.3.3.6
extendTemperatureEntryRow definition for Extend Temperature Sensor table.
ExtendTemperatureEntry
.1.3.6.1.4.1.10456.3.3.6.1
extendTemperatureIndexIndex for the Extend Temperature Sensor table.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.6.1.1
extendTemperatureDeviceIdExtend Temperature Monitor Status.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.6.1.2
extendTemperaturePortExtend Temperature Monitor Status.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.6.1.3
extendTemperatureMonitorExtend Temperature Monitor Status.ro
Enumeration
.1.3.6.1.4.1.10456.3.3.6.1.4
extendTemperatureStatusExtend Temperature Sensor Connect Status.ro
Enumeration
.1.3.6.1.4.1.10456.3.3.6.1.5
extendTemperatureDetected Temperature from Inbuilt Temperature Sensor.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.6.1.6
extendTemperatureHighWarningHigh Warning Temperature from Extend Temperature Sensor.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.6.1.7
extendTemperatureLowWarningLow Warning Temperature from Extend Temperature Sensor.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.6.1.8
extendRHTableThe table of Extend RH Sensor.
SEQUENCE OF ExtendRHEntry
.1.3.6.1.4.1.10456.3.3.7
extendRHEntryRow definition for Extend RH table.
ExtendRHEntry
.1.3.6.1.4.1.10456.3.3.7.1
extendRHIndexIndex for the Extend RH Sensor table.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.7.1.1
extendRHDeviceIdIndex for the Extend RH Sensor table.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.7.1.2
extendRHPortIndex for the Extend RH Sensor table.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.7.1.3
extendRHMonitorExtend RH Monitor Status.ro
Enumeration
.1.3.6.1.4.1.10456.3.3.7.1.4
extendRHStatusExtend RH Sensor Connect Status.ro
Enumeration
.1.3.6.1.4.1.10456.3.3.7.1.5
extendRHDetected RH from Inbuilt Temperature Sensor.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.7.1.6
extendRHHighWarningHigh Warning RH from Extend Temperature Sensor.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.7.1.7
extendRHLowWarningLow Warning RH from Extend Temperature Sensor.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.7.1.8
inputTableThe table of Input.
SEQUENCE OF InputEntry
.1.3.6.1.4.1.10456.3.3.8
inputEntryRow definition for Input table.
InputEntry
.1.3.6.1.4.1.10456.3.3.8.1
inputIndexIndex for Input table.ro
INTEGER (1)
.1.3.6.1.4.1.10456.3.3.8.1.1
inputStatusThis OID is provided for Input Status. '0' NORMAL. '1' WARNING. '2' TIMEOUT.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.8.1.2
inputStateThis OID is provided for Input Default. '0' NORMAL_CLOSE. '1' NORMAL_OPEN.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.8.1.3
inputTimeoutTimeOut of Input Status.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.8.1.4
inputDefaultThis OID is provided for Input Default. '0' NORMAL_CLOSE. '1' NORMAL_OPEN.rw
INTEGER
.1.3.6.1.4.1.10456.3.3.8.1.5
inputDetectTimeDetect the nearest Changed Time of Input Status.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.8.1.6
rfidReader
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.3.9
rfidCardNumRFID Card Number.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.9.1
rfidDetectTimeThe Nearest Time to detect RFID Card.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.9.2
uPS
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.3.10
uPSModelUPS Model.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.10.1
uPSConnectStatusUPS Connect Status.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.2
uPSFirmwareUPS Firmware.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.10.3
uPSSerialUPS Serial.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.10.4
uPSTemperatureUPS Temperature.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.5
uPSInputVoltageUPS Input Voltage.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.6
uPSOutputOnBatteryUPS Output On Battery.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.7
uPSOutputVoltageUPS Output Voltage.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.8
uPSOutputFrequencyUPS Output Voltage.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.9
uPSOutputCurrentUPS Output Current.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.10
uPSOutputLoadUPS Output Load.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.11
uPSOutputOverloadUPS Output Overload.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.12
uPSBatteryDateUPS Battery Date.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.10.13
uPSBatteryVoltageUPS Battery Voltage.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.14
uPSBatteryLevelUPS Battery Level.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.15
uPSBatteryRunTimeUPS Battery RunTime.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.16
uPSBatteryLowUPS Battery Low.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.17
uPSBatteryReplaceUPS Battery Need Replace.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.18
uPSUARTIdUPS UART Id.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.10.19
micDetec
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.3.11
micDetectTimesMIC Detect Times.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.11.1
micDetectPeriodMIC Detect Period.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.11.2
micLastDetectTimeMIC Detect Detect Time.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.11.3
vibrationDetec
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.3.12
vibrationDetectTimesVibration Detect Times.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.12.1
vibrationDetectPeriodVibration Detect Period.ro
INTEGER
.1.3.6.1.4.1.10456.3.3.12.2
vibrationLastDetectTimeVibration Detect Detect Time.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.3.12.3
dataLogTable
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.4
inFeedDataListInput Feed Data List.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.4.1
outDataListOutlet Data List.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.4.2
pduDataListPDU Data List.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.10456.3.4.3
smartTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.100
trap
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.100.1
testTraptestData
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.1
inFeedOverloadTrapdeviceIndex, inFeedIndex, inFeedStatus, inFeedCurrent, inFeedOverload Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.101
inFeedHighCurrentTrapdeviceIndex, inFeedIndex, inFeedStatus, inFeedCurrent, inFeedHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.102
inFeedLowCurrentTrapdeviceIndex, inFeedIndex, inFeedStatus, inFeedCurrent, inFeedHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.103
inFeedBranchOverloadTrapinFeedIndex, BranchIndex, inFeedStatus, inFeedCurrent, inFeedOverload Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.104
inFeedBranchHighCurrentTrapinFeedIndex, BranchIndex, inFeedStatus, inFeedCurrent, inFeedHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.105
inFeedBranchLowCurrentTrapinFeedIndex, BranchIndex, inFeedStatus, inFeedCurrent, inFeedHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.106
outWebOperationTrapOutlet on/off change event. If enabled, this trap is sent when the outStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.201
outPanelOperationTrapOutlet on/off change event. If enabled, this trap is sent when the outStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.202
outAPIOperationTrapOutlet on/off change event. If enabled, this trap is sent when the outStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.203
outScheduleTrapOutlet on/off change event. If enabled, this trap is sent when the outStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.211
outScheduleErrorTrapOutlet on/off change event. If enabled, this trap is sent when the outStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.212
outPingTrapOutlet on/off change event. If enabled, this trap is sent when the outStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.221
outPingRebootTrapOutlet on/off change event. If enabled, this trap is sent when the outStatus changes from any 'on' state ('on', 'onWait', 'onError', or 'onFuse') to any 'off' state ('off', 'offWait', 'offError', or 'offFuse'), and vice-versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.222
outOverloadTrapdeviceIndex, outIndex, outCurrentStatus, outCurrent, outHighWarning Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.231
outHighCurrentTrapdeviceIndex, outIndex, outCurrentStatus, outCurrent, outHighWarning Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.232
outLowCurrentTrapdeviceIndex, outIndex, outCurrentStatus, outCurrent, outLowWarning Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.233
outConditionCtrlTrapdeviceIndex, outIndex, outCurrentStatus, outCurrent, outLowWarning Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.241
outUPSACFaultOffTrapdeviceIndex, value Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.311
outUPSBatteryLevelOffTrapdeviceIndex, value Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.312
outUPSBatteryLowOffTrapdeviceIndex, value Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.313
outUPSACRecoveryOnTrapdeviceIndex, value Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.314
outUPSBatteryLevelOnTrapdeviceIndex, value Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.315
outUPSBatteryLowRecoveryOnTrapdeviceIndex, value Outlet load event. If enabled, this trap is sent when the outLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the outLoadStatus remains in an error state. If the outLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error outLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.316
pduConnectTrapPDUIndex, PDUConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.401
pduOverloadTrapdeviceIndex, PDUIndex, PDUStatus, PDUCurrent, PDUOverload Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.402
pduHighCurrentTrapdeviceIndex, PDUIndex, PDUStatus, PDUCurrent, PDUHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.403
pduLowCurrentTrapdeviceIndex, PDUIndex, PDUStatus, PDUCurrent, PDUHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.404
pduBranchOverloadTrapPDUIndex, BranchIndex, PDUStatus, PDUCurrent, PDUOverload Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.405
pduBranchHighCurrentTrapPDUIndex, BranchIndex, PDUStatus, PDUCurrent, PDUHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.406
pduBranchLowCurrentTrapPDUIndex, BranchIndex, PDUStatus, PDUCurrent, PDUHighWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.407
inbuiltTemperatureHighTrapInTempId, InTempStatus, InTempTemperature, InTempTemperatureWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.501
inbuiltTemperatureLowTrapInTempId, InTempStatus, InTempTemperature, InTempTemperatureWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.502
envConnectTrapdeviceIndex, ENVIndex, ENVConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.511
envTemperatureConnectTrapdeviceIndex, ENVIndex, ENVConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.512
envTemperatureHighTrapdeviceIndex, EnvId, EnvStatus, EnvTemperature, EnvTemperatureWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.513
envTemperatureLowTrapdeviceIndex, EnvId, EnvStatus, EnvTemperature, EnvTemperatureWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.514
envRHConnectTrapdeviceIndex, EnvId, EnvStatus, EnvRH, EnvRHWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.515
envRHHighTrapdeviceIndex, EnvId, EnvStatus, EnvRH, EnvRHWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.516
envRHLowTrapdeviceIndex, EnvId, EnvStatus, EnvRH, EnvRHWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.517
inputTimeOutTrapdeviceIndex, EnvId, EnvStatus, EnvTemperature, EnvTemperatureWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.601
inputTrapdeviceIndex, EnvId, EnvStatus, EnvTemperature, EnvTemperatureWarning Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.602
upsConnectTrapModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.701
upsOnBatteryTrapModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.702
upsOverloadTrapModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.703
upsBatteryLowTrapModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.704
upsBatteryReplaceModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.705
daisyChainConnectTrapModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.801
micDetectOccurTrapModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.901
vibrationDetectOccurTrapModel, ConnectStatus Input feed load event. If enabled, this trap is sent when the infeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'noComm'). This trap is repeated periodically while the infeedLoadStatus remains in an error state. If the infeedLoadStatus returns to a non-error state ('normal' or 'notOn'), this trap is sent once more with the non-error infeedLoadStatus, and then stops being repeated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.10456.3.100.1.902
arg
OBJECT IDENTIFIER
.1.3.6.1.4.1.10456.3.100.2
trapArg1Indicate the Trap Arg1.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.1
trapArg2Indicate the Trap Arg2.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.2
trapArg3Indicate the Trap Arg3.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.3
trapArg4Indicate the Trap Arg4.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.4
trapArg5Indicate the Trap Arg5.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.5
trapArg6Indicate the Trap Arg6.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.6
trapArg7Indicate the Trap Arg7.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.7
trapArg8Indicate the Trap Arg8.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.8
trapArg9Indicate the Trap Arg9.ro
INTEGER
.1.3.6.1.4.1.10456.3.100.2.9
DIGIPDU-MIB - SNMP MIB Reference | MIBs Explorer