DASAN-DSL-MIB
AI MIB Summary
The DASAN-DSL-MIB module provides SNMP management objects for monitoring and configuring SDSL (Symmetric Digital Subscriber Line) physical layer parameters, line states, and performance counters on Dasan DSL access equipment. It enables administrators to track critical DSL metrics such as line attenuation, signal-to-noise ratio, and synchronization status to diagnose connectivity issues and manage service quality.
The MIB module to describe SDSL product.
Main OID:
dasanDslMIB.1.3.6.1.4.1.6296.9.3
339
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
339 total| Object Name |
|---|
dasanDslMIBThe MIB module to describe SDSL product. MODULE-IDENTITY .1.3.6.1.4.1.6296.9.3 |
dasanDslMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.1 |
dsDslSystem OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.1.1 |
dsDslModules OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.1.2 |
moduleNumberThe number of DSL modules (regardless of their current state) present on this system.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.2.1 |
moduleTableLastChangeThe value of sysUpTime at the time of the last creation or deletion of an entry in the moduleTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.1.2.2 |
moduleTableA list of module entries. The number of entries is given by the value of moduleNumber. SEQUENCE OF ModuleEntry .1.3.6.1.4.1.6296.9.3.1.2.3 |
moduleEntryAn entry containing management information applicable to a particular module. ModuleEntry .1.3.6.1.4.1.6296.9.3.1.2.3.1 |
moduleIndexA unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.2.3.1.1 |
moduleDescrA textual string containing information about the module. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.2.3.1.2 |
moduleTypeThe type of module. This string defines the type of DSL module type. For instance, this can be SDSL, VDSL or SDSL.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.2.3.1.3 |
modulePhysAddressThe module's address at its ethernet interface. For example, this object normally contains a MAC address.roobsolete PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.2.3.1.4 |
moduleOperStatusThe current operational state of the module.roobsolete Enumeration .1.3.6.1.4.1.6296.9.3.1.2.3.1.5 |
moduleUpTimeElasped time since this module has been boot up.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.2.3.1.6 |
moduleAvailableMemoryThe amount of free memory in this module.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.2.3.1.7 |
modulePortNumberThe number of ethernet ports and ethernet-like DSL ports (regardless of their current state) present on this module.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.2.3.1.8 |
modulePortIndexBasePort index base for this module. Port index range of this module is from modulePortIndexBase to (modulePortInexBase + modulePortNumber - 1).roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.2.3.1.9 |
moduleSpecificA reference to MIB definitions specific to the particular media being used to realize the module. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1903. In fact, it is recommended that the module- specific MIB specify what value moduleSpecific should/can take for values of moduleType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.roobsolete OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.1.2.3.1.10 |
dsDslPorts OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.1.3 |
dsDslPortNumberThe number of DSL modules (regardless of their current state) present on this system.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.3.1 |
dsDslPortTableA list of module entries. The number of entries is given by the value of moduleNumber. SEQUENCE OF DsDslPortEntry .1.3.6.1.4.1.6296.9.3.1.3.2 |
dsDslPortEntryAn entry containing management information applicable to a particular port. DsDslPortEntry .1.3.6.1.4.1.6296.9.3.1.3.2.1 |
portIndexA unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.3.2.1.1 |
portDescrA textual string containing information about the port.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.3.2.1.2 |
portTypeThe type of communication port. This string defines the type of port. Each module has one or more ethernet port(s) and xDSL ports.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.3.2.1.3 |
portIfIndexifIndex which is defined in interface mib.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.3.2.1.4 |
portAdminStatusThe current administrative state of the port.roobsolete Enumeration .1.3.6.1.4.1.6296.9.3.1.3.2.1.5 |
portOperStatusThe current operational state of the port.roobsolete Enumeration .1.3.6.1.4.1.6296.9.3.1.3.2.1.6 |
portModemStatusidle : system does not try to establish modem link. trying : system is trying to establish modem link. established : modem link has been established. If trying is written, modem will be reset and the system will try to re-establish modem link. If idle is set, system will not manage modem connection. When established is written, it will be ignored silently.rwobsolete Enumeration .1.3.6.1.4.1.6296.9.3.1.3.2.1.7 |
portLineQualityThe ascii string which describes the quality of link. Description can be distinct for DSL link type.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.3.2.1.8 |
portUpStreamSpeedAn estimate of the port's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.3.2.1.9 |
portDownStreamSpeedAn estimate of the port's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.3.2.1.10 |
portLastModemStatusChangeElasped time since modem status has been changed.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.3.2.1.11 |
portSpecificA reference to MIB definitions specific to the particular media being used to realize the module. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1903. In fact, it is recommended that the module- specific MIB specify what value moduleSpecific should/can take for values of moduleType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.roobsolete OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.1.3.2.1.12 |
dsDslLearnedMacs OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.1.4 |
macNumberThe number of DSL modules (regardless of their current state) present on this system.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.4.1 |
macTableA list of module entries. The number of entries is given by the value of moduleNumber. SEQUENCE OF MacEntry .1.3.6.1.4.1.6296.9.3.1.4.2 |
macEntryEach entry contains one MAC address and its aging time.deprecated MacEntry .1.3.6.1.4.1.6296.9.3.1.4.2.1 |
macIndexMAC table entry index.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.4.2.1.1 |
macAddressMAC address learned on this port.roobsolete PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.1.4.2.1.2 |
agingTimeElapased time since last RX activity from this MAC-addressed host.roobsolete INTEGER .1.3.6.1.4.1.6296.9.3.1.4.2.1.3 |
dasanDslMIBObjects2 OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2 |
dsVdslNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.0 |
dsVdslSystemBaseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.1 |
dsVdslSystemFWVersion.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.1.1 |
dsVdslSystemLowPowerMode.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.1.2 |
dsVdslSystemBmeResetselect bme-number to resetrw Integer32 .1.3.6.1.4.1.6296.9.3.2.1.3 |
dsVdslSystemUpboConfTableDescription. SEQUENCE OF DsVdslSystemUpboConfEntry .1.3.6.1.4.1.6296.9.3.2.1.50 |
dsVdslSystemUpboConfEntryDescription. DsVdslSystemUpboConfEntry .1.3.6.1.4.1.6296.9.3.2.1.50.1 |
dsVdslSystemUpboConfLengthDescription.ro INTEGER .1.3.6.1.4.1.6296.9.3.2.1.50.1.1 |
dsVdslSystemUpboConfArrayK1Description.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.1.50.1.2 |
dsVdslSystemUpboConfArrayK2Description.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.1.50.1.3 |
dsVdslStatus OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.2 |
dsVdslStatusBitAlloc OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.2.1 |
dsVdslStatusBAIfindex.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.2.1.1 |
dsVdslStatusBAPhySide.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.2.1.2 |
dsVdslStatusBASectionSize.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.2.1.3 |
dsVdslStatusBAAction.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.2.1.4 |
dsVdslStatusBAStatus.ro Enumeration .1.3.6.1.4.1.6296.9.3.2.2.1.5 |
dsVdslStatusBALastTime.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.2.1.6 |
dsVdslStatusBATable. SEQUENCE OF DsVdslStatusBAEntry .1.3.6.1.4.1.6296.9.3.2.2.1.7 |
dsVdslStatusBAEntry. DsVdslStatusBAEntry .1.3.6.1.4.1.6296.9.3.2.2.1.7.1 |
dsVdslStatusBASectionIndex. INTEGER .1.3.6.1.4.1.6296.9.3.2.2.1.7.1.1 |
dsVdslStatusBABitLoading.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.2.1.7.1.2 |
dsVdslLine OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.3 |
dsVdslLinePsdShaping OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.3.1 |
dsVdslLinePsdShapingTableDescription. SEQUENCE OF DsVdslLinePsdShapingEntry .1.3.6.1.4.1.6296.9.3.2.3.1.1 |
dsVdslLinePsdShapingEntryDescription. DsVdslLinePsdShapingEntry .1.3.6.1.4.1.6296.9.3.2.3.1.1.1 |
dsVdslLinePsdShapingUsFlagDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.1 |
dsVdslLinePsdShapingUsEwlNameDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.2 |
dsVdslLinePsdShapingUsEwlLengthDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.3 |
dsVdslLinePsdShapingUsRetryCountDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.4 |
dsVdslLinePsdShapingUsAutoStatusDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.5 |
dsVdslLinePsdShapingUsAutoDrDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.6 |
dsVdslLinePsdShapingUsCurrentTryCountDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.7 |
dsVdslLinePsdShapingUsEwlOnAutoDrDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.8 |
dsVdslLinePsdShapingUsClearAutoDrDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.11 |
dsVdslLinePsdShapingUsMethodTypeDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.13 |
dsVdslLinePsdShapingUsStepCountDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.14 |
dsVdslLinePsdShapingDsFlagDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.21 |
dsVdslLinePsdShapingDsEwlNameDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.22 |
dsVdslLinePsdShapingDsEwlLengthDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.23 |
dsVdslLinePsdShapingDsFreqMinDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.24 |
dsVdslLinePsdShapingDsFreqMaxDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.1.1.1.25 |
dsVdslLineConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.3.2 |
dsVdslLineConfigTableDescription. SEQUENCE OF DsVdslLineConfigEntry .1.3.6.1.4.1.6296.9.3.2.3.2.1 |
dsVdslLineConfigEntryDescription. DsVdslLineConfigEntry .1.3.6.1.4.1.6296.9.3.2.3.2.1.1 |
dsVdslLineConfMicroCutDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.1 |
dsVdslLineConfigMicroCutThreshold-1 means default threshold value.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.2 |
dsVdslLineConfigMicroCutStatTotalDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.3 |
dsVdslLineConfigMicroCutStatCurrentDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.4 |
dsVdslLineConfigMicroCutStatLinkdownDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.5 |
dsVdslLineConfigMicroCutStatClearedDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.6 |
dsVdslLineConfigTrustSnrDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.7 |
dsVdslLineConfigTrustSnrThreshUpMargin-1 means default valuerw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.8 |
dsVdslLineConfigTrustSnrThreshUpTime-1 means default valuerw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.9 |
dsVdslLineConfigTrustSnrThreshDownMargin-1 means default valuerw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.10 |
dsVdslLineConfigTrustSnrThreshDownTime-1 means default valuerw Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.11 |
dsVdslLineConfigTrustSnrStatUpRunningDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.12 |
dsVdslLineConfigTrustSnrStatUpTimeDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.13 |
dsVdslLineConfigTrustSnrStatDownRunningDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.14 |
dsVdslLineConfigTrustSnrStatDownTimeDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.15 |
dsVdslLineConfigTrustSnrStatLinkdownDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.16 |
dsVdslLineConfigTrustSnrStatClearedDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.3.2.1.1.17 |
dsVdslLineStatus OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.3.11 |
dsVdslLineStatusTableDescription. SEQUENCE OF DsVdslLineStatusEntry .1.3.6.1.4.1.6296.9.3.2.3.11.1 |
dsVdslLineStatusEntryDescription. DsVdslLineStatusEntry .1.3.6.1.4.1.6296.9.3.2.3.11.1.1 |
dsVdslLineStatusCpeLinkdownReasonDescription.ro Enumeration .1.3.6.1.4.1.6296.9.3.2.3.11.1.1.1 |
dsVdslPM OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.5 |
dsVdslPMMediaAdaptor OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.5.1 |
dsVdslPMMATable. SEQUENCE OF DsVdslPMMAEntry .1.3.6.1.4.1.6296.9.3.2.5.1.1 |
dsVdslPMMAEntry. DsVdslPMMAEntry .1.3.6.1.4.1.6296.9.3.2.5.1.1.1 |
dsVdslPMMARxFrameCount.ro Counter64 .1.3.6.1.4.1.6296.9.3.2.5.1.1.1.1 |
dsVdslPMMARxCRCErr.ro Counter64 .1.3.6.1.4.1.6296.9.3.2.5.1.1.1.2 |
dsVdslPMMARxDrop.ro Counter64 .1.3.6.1.4.1.6296.9.3.2.5.1.1.1.3 |
dsVdslPMMATxFrameCount.ro Counter64 .1.3.6.1.4.1.6296.9.3.2.5.1.1.1.4 |
dsVdslPMMATxDrop.ro Counter64 .1.3.6.1.4.1.6296.9.3.2.5.1.1.1.5 |
dsVdslPMMAEnetCrcErrCnt.ro Counter64 .1.3.6.1.4.1.6296.9.3.2.5.1.1.1.6 |
dsVdslPMMACleared.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.5.1.1.1.7 |
dsVdslPMStatCount OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.5.2 |
dsVdslPMCoStatTableDescription. SEQUENCE OF DsVdslPMCoStatEntry .1.3.6.1.4.1.6296.9.3.2.5.2.1 |
dsVdslPMCoStatEntryDescription. DsVdslPMCoStatEntry .1.3.6.1.4.1.6296.9.3.2.5.2.1.1 |
dsVdslPMLosThe LOS total statistic value. set to 0 to clear count.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.1 |
dsVdslPMLofDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.2 |
dsVdslPMLolDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.3 |
dsVdslPMCorrBlkDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.4 |
dsVdslPMUnCorrBlkDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.5 |
dsVdslPMCRCDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.6 |
dsVdslPMServiceErrorDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.7 |
dsVdslPMLossDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.18 |
dsVdslPMLofsDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.19 |
dsVdslPMLolsDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.20 |
dsVdslPMESsDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.21 |
dsVdslPMSESsDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.22 |
dsVdslPMUASsDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.23 |
dsVdslPMCRCsDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.24 |
dsVdslPM15minElapsedTimeDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.28 |
dsVdslPM1dayElapsedTimeDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.29 |
dsVdslPMClearclear all error statistic counter with timer.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.5.2.1.1.30 |
dsVdslPMCoStat15minTableDescription. SEQUENCE OF DsVdslPMCoStat15minEntry .1.3.6.1.4.1.6296.9.3.2.5.2.2 |
dsVdslPMCoStat15minEntryDescription. DsVdslPMCoStat15minEntry .1.3.6.1.4.1.6296.9.3.2.5.2.2.1 |
dsVdslPM15minIntervalPerformance Data Interval number 1 is the most recent previous interval; interval 0 is current. Integer32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.1 |
dsVdslPM15minLosDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.2 |
dsVdslPM15minLofDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.3 |
dsVdslPM15minLolDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.4 |
dsVdslPM15minCorrBlkDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.5 |
dsVdslPM15minUnCorrBlkDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.6 |
dsVdslPM15minCRCDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.7 |
dsVdslPM15minServiceErrorDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.8 |
dsVdslPM15minLossDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.19 |
dsVdslPM15minLofsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.20 |
dsVdslPM15minLolsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.21 |
dsVdslPM15minESsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.22 |
dsVdslPM15minSESsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.23 |
dsVdslPM15minUASsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.24 |
dsVdslPM15minCRCsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.2.1.25 |
dsVdslPMCoStat1dayTableDescription. SEQUENCE OF DsVdslPMCoStat1dayEntry .1.3.6.1.4.1.6296.9.3.2.5.2.3 |
dsVdslPMCoStat1dayEntryDescription. DsVdslPMCoStat1dayEntry .1.3.6.1.4.1.6296.9.3.2.5.2.3.1 |
dsVdslPM1dayIntervalPerformance Data Interval number 1 is the most recent previous interval; interval 0 is current. Integer32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.1 |
dsVdslPM1dayLosDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.2 |
dsVdslPM1dayLofDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.3 |
dsVdslPM1dayLolDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.4 |
dsVdslPM1dayCorrBlkDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.5 |
dsVdslPM1dayUnCorrBlkDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.6 |
dsVdslPM1dayCRCDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.7 |
dsVdslPMdayServiceErrorDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.8 |
dsVdslPM1dayLossDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.19 |
dsVdslPM1dayLofsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.20 |
dsVdslPM1dayLolsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.21 |
dsVdslPM1dayESsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.22 |
dsVdslPM1daySESsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.23 |
dsVdslPM1dayUASsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.24 |
dsVdslPM1dayCRCsDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.3.1.25 |
dsVdslPMCpeStatTableDescription. SEQUENCE OF DsVdslPMCpeStatEntry .1.3.6.1.4.1.6296.9.3.2.5.2.4 |
dsVdslPMCpeStatEntryDescription. DsVdslPMCpeStatEntry .1.3.6.1.4.1.6296.9.3.2.5.2.4.1 |
dsVdslPMCpeLosDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.4.1.1 |
dsVdslPMCpeLofDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.4.1.2 |
dsVdslPMCpeCorrBlkDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.4.1.3 |
dsVdslPMCpeUnCorrBlkDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.4.1.4 |
dsVdslPMCpeCRCDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.5.2.4.1.5 |
dsVdslPMCpeClearDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.5.2.4.1.6 |
dsVdslProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.6 |
dsVdslLineCfgProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.6.1 |
dsVdslLineCfgProfileTableThis table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the VDSL line. Entries in this table MUST be maintained in a persistent manner. SEQUENCE OF DsVdslLineCfgProfileEntry .1.3.6.1.4.1.6296.9.3.2.6.1.1 |
dsVdslLineCfgProfileEntryEach entry consists of a list of parameters that represents the configuration of a VDSL line. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. DsVdslLineCfgProfileEntry .1.3.6.1.4.1.6296.9.3.2.6.1.1.1 |
dsVdslLineCfgProfileNameThis object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.1 |
dsVdslLineCfgDownMaxSnrMgnSpecifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.4 |
dsVdslLineCfgDownMinSnrMgnSpecifies the minimum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.5 |
dsVdslLineCfgDownTargetSnrMgnSpecifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.6 |
dsVdslLineCfgUpMaxSnrMgnSpecifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.7 |
dsVdslLineCfgUpMinSnrMgnSpecifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.8 |
dsVdslLineCfgUpTargetSnrMgnSpecifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.9 |
dsVdslLineCfgDownMaxDataRateSpecifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derived from the sum of maximum downstream fast and slow channel data rates.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.10 |
dsVdslLineCfgDownMinDataRateSpecifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derived from the sum of minimum downstream fast and slow channel data rates.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.11 |
dsVdslLineCfgUpMaxDataRateSpecifies the maximum upstream slow channel data rate in steps of 1000 bits/second.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.12 |
dsVdslLineCfgUpMinDataRateSpecifies the minimum upstream slow channel data rate in steps of 1000 bits/second.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.13 |
dsVdslLineCfgDownMaxInterDelaySpecifies the maximum interleave delay for the downstream slow channel.rw INTEGER .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.16 |
dsVdslLineCfgUpMaxInterDelaySpecifies the maximum interleave delay for the upstream slow channel.rw INTEGER .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.17 |
dsVdslLineCfgHambanddsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000rw Counter64 .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.20 |
dsVdslLineCfgDownINPVdsl downstream INP .rw INTEGER .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.21 |
dsVdslLineCfgUpINPVdsl upstream INP.rw INTEGER .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.22 |
dsVdslLineCfgPBOLengthdsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)ro Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.23 |
dsVdslLineCfgPSDMaskLeveldsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11)ro Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.24 |
dsVdslLineCfgTCMAdmin.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.25 |
dsVdslLineCfgUpboEnable.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.26 |
dsVdslLineCfgChannel.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.27 |
dsVdslLineCfgStandardVDSL Standard.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.28 |
dsVdslLineCfgLineProfilesym25(1), asym50-3b(2), asym50-4b(3), asym70(4), asym100(5), sym100(6), 8a(8), 8b(9), 8c(10), 8d(11), 12a(12), 12b(13), 17a(14), 30a(15), 12a997(16), 12b997(17), v17a_8k(18)rw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.29 |
dsVdslLineCfgToneDisableModenormal(1), isdn(2), adsl(3), adsl2(4), t-lan(5), adsl-safe(6)rw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.30 |
dsVdslLineCfgOptionbanddsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4) Annex Mrw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.31 |
dsVdslLineCfgProfileActionreal set to profile parameter at the time. profile parameter is followings. dsVdslLineCfgStandard, dsVdslLineCfgLineProfile, dsVdslLineCfgToneDisableMode, dsVdslLineCfgOptionband.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.33 |
dsVdslLineCfgProfRowStatusThis object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to 'destroy' or 'outOfService') it must be first unreferenced from all associated lines.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6296.9.3.2.6.1.1.1.100 |
dsVdslCpeNosAutoUp OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9 |
dsCpeNosAutoUpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.1 |
dsCpeNosAutoUpBase OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.1.1 |
dsCpeNosAutoUpConfStatusDescription.ro Enumeration .1.3.6.1.4.1.6296.9.3.2.9.1.1.1 |
dsCpeNosAutoUpControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.1.2 |
dsCpeNosAutoUpControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.1.2.1 |
dsCpeNosAutoUpControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.1.2.2 |
dsCpeNosAutoUpControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.9.1.2.3 |
dsCpeNosAutoUpControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.9.1.2.4 |
dsCpeNosAutoUpControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.1.2.5 |
dsCpeNosAutoUpControlConfStatusDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.1.2.6 |
dsCpeNosAutoUpCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.2 |
dsCpeNosAutoUpCtrlTableDescription. SEQUENCE OF DsCpeNosAutoUpCtrlEntry .1.3.6.1.4.1.6296.9.3.2.9.2.1 |
dsCpeNosAutoUpCtrlEntryDescription. DsCpeNosAutoUpCtrlEntry .1.3.6.1.4.1.6296.9.3.2.9.2.1.1 |
dsCpeNosAutoUpCtrlNameDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.1.1.1 |
dsCpeNosAutoUpCtrlHWDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.1.1.2 |
dsCpeNosAutoUpCtrlOldFWDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.1.1.3 |
dsCpeNosAutoUpCtrlNewFWDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.1.1.4 |
dsCpeNosAutoUpCtrlFWSizeDescription.ro Unsigned32 .1.3.6.1.4.1.6296.9.3.2.9.2.1.1.5 |
dsCpeNosAutoUpCtrlControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.2.2 |
dsCpeNosAutoUpCtrlControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.2.2.1 |
dsCpeNosAutoUpCtrlControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.2.2.2 |
dsCpeNosAutoUpCtrlControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.9.2.2.3 |
dsCpeNosAutoUpCtrlControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.9.2.2.4 |
dsCpeNosAutoUpCtrlControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.2.2.5 |
dsCpeNosAutoUpCtrlControlNameDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.2.6 |
dsCpeNosAutoUpCtrlControlHWDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.2.7 |
dsCpeNosAutoUpCtrlControlOldFWDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.2.8 |
dsCpeNosAutoUpCtrlControlNewFWDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.2.2.9 |
dsCpeNosAutoUpCtrlControlFWSizeDescription.rw Unsigned32 .1.3.6.1.4.1.6296.9.3.2.9.2.2.10 |
dsCpeNosAutoUpSched OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.3 |
dsCpeNosAutoUpSchedTableDescription. SEQUENCE OF DsCpeNosAutoUpSchedEntry .1.3.6.1.4.1.6296.9.3.2.9.3.1 |
dsCpeNosAutoUpSchedEntryDescription. DsCpeNosAutoUpSchedEntry .1.3.6.1.4.1.6296.9.3.2.9.3.1.1 |
dsCpeNosAutoUpSchedNameDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.1 |
dsCpeNosAutoUpSchedTypeDescription.ro Enumeration .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.2 |
dsCpeNosAutoUpSchedSecDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.3 |
dsCpeNosAutoUpSchedIntervalDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.4 |
dsCpeNosAutoUpSchedYearDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.5 |
dsCpeNosAutoUpSchedMonthDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.6 |
dsCpeNosAutoUpSchedDayDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.7 |
dsCpeNosAutoUpSchedHourDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.8 |
dsCpeNosAutoUpSchedMinuteDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.9 |
dsCpeNosAutoUpSchedPortMapDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.10 |
dsCpeNosAutoUpSchedCtrlMapDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.3.1.1.11 |
dsCpeNosAutoUpSchedControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.3.2 |
dsCpeNosAutoUpSchedControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.3.2.1 |
dsCpeNosAutoUpSchedControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.3.2.2 |
dsCpeNosAutoUpSchedControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.3 |
dsCpeNosAutoUpSchedControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.9.3.2.4 |
dsCpeNosAutoUpSchedControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.3.2.5 |
dsCpeNosAutoUpSchedControlNameDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.3.2.6 |
dsCpeNosAutoUpSchedControlTypeDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.3.2.7 |
dsCpeNosAutoUpSchedControlSecDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.8 |
dsCpeNosAutoUpSchedControlIntervalDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.9 |
dsCpeNosAutoUpSchedControlYearDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.10 |
dsCpeNosAutoUpSchedControlMonthDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.11 |
dsCpeNosAutoupSchedControlDayDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.12 |
dsCpeNosAutoUpSchedControlHourDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.13 |
dsCpeNosAutoUpSchedControlMinuteDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.3.2.14 |
dsCpeNosAutoUpSchedControlPortMapDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.3.2.15 |
dsCpeNosAutoUpSchedControlCtrlMapDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.3.2.16 |
dsCpeNosAutoUpPort OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.4 |
dsCpeNosAutoUpPortTableDescription. SEQUENCE OF DsCpeNosAutoUpPortEntry .1.3.6.1.4.1.6296.9.3.2.9.4.1 |
dsCpeNosAutoUpPortEntryDescription. DsCpeNosAutoUpPortEntry .1.3.6.1.4.1.6296.9.3.2.9.4.1.1 |
dsCpeNosAutoUpPortPortNumDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.1.1.1 |
dsCpeNosAutoUpPortRetryDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.1.1.2 |
dsCpeNosAutoUpPortTimeoutDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.1.1.3 |
dsCpeNosAutoUpPortSchedMapDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.4.1.1.4 |
dsCpeNosAutoUpPortCurrStateDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.1.1.5 |
dsCpeNosAutoUpPortCurrSchedDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.1.1.6 |
dsCpeNosAutoUpPortCurrCtrlDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.1.1.7 |
dsCpeNosAutoUpPortControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.4.2 |
dsCpeNosAutoUpPortControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.4.2.1 |
dsCpeNosAutoUpPortControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.4.2.2 |
dsCpeNosAutoUpPortControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.9.4.2.3 |
dsCpeNosAutoUpPortControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.9.4.2.4 |
dsCpeNosAutoUpPortControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.4.2.5 |
dsCpeNosAutoUpPortControlPortNumDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.2.6 |
dsCpeNosAutoUpPortControlRetryDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.2.7 |
dsCpeNosAutoUpPortControlTimeoutDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.4.2.8 |
dsCpeNosAutoUpNos OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.5 |
dsCpeNosAutoUpNosTableDescription. SEQUENCE OF DsCpeNosAutoUpNosEntry .1.3.6.1.4.1.6296.9.3.2.9.5.1 |
dsCpeNosAutoUpNosEntryDescription. DsCpeNosAutoUpNosEntry .1.3.6.1.4.1.6296.9.3.2.9.5.1.1 |
dsCpeNosAutoUpNosNameDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.5.1.1.1 |
dsCpeNosAutoUpNosSizeDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.5.1.1.2 |
dsCpeNosAutoUpNosControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.5.2 |
dsCpeNosAutoUpNosControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.5.2.1 |
dsCpeNosAutoUpNosControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.5.2.2 |
dsCpeNosAutoUpNosControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.9.5.2.3 |
dsCpeNosAutoUpNosControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.9.5.2.4 |
dsCpeNosAutoUpNosControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.5.2.5 |
dsCpeNosAutoUpNosControlServerIPDescription.rw IpAddress .1.3.6.1.4.1.6296.9.3.2.9.5.2.6 |
dsCpeNosAutoUpNosControlUserIDDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.5.2.7 |
dsCpeNosAutoUpNosControlPasswdDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.5.2.8 |
dsCpeNosAutoUpNosControlSrcNameDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.5.2.9 |
dsCpeNosAutoUpNosControlDestNameDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.5.2.10 |
dsCpeNosAutoUpResultLog OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.6 |
dsCpeNosAutoUpRLogTableDescription. SEQUENCE OF DsCpeNosAutoUpRLogEntry .1.3.6.1.4.1.6296.9.3.2.9.6.1 |
dsCpeNosAutoUpRLogEntryDescription. DsCpeNosAutoUpRLogEntry .1.3.6.1.4.1.6296.9.3.2.9.6.1.1 |
dsCpeNosAutoUpRLogNameDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.6.1.1.1 |
dsCpeNosAutoUpRLogValueDescription.ro OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.6.1.1.2 |
dsCpeNosAutoUpRLogControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.6.2 |
dsCpeNosAutoUpRLogControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.6.2.1 |
dsCpeNosAutoUpRLogControlStatusDescription.ro SleControlStatusType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.6.2.2 |
dsCpeNosAutoUpRLogControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.9.6.2.3 |
dsCpeNosAutoUpRLogControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.9.6.2.4 |
dsCpeNosAutoUpRLogControlReqResultDescription.ro SleControlRequestResultType (SLE-TC-MIB) .1.3.6.1.4.1.6296.9.3.2.9.6.2.5 |
dsCpeNosAutoUpRLogControlServerIPDescription.rw IpAddress .1.3.6.1.4.1.6296.9.3.2.9.6.2.6 |
dsCpeNosAutoUpRLogControlUserIDDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.6.2.7 |
dsCpeNosAutoUpRLogControlPasswdDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.6.2.8 |
dsCpeNosAutoUpRLogControlSrcNameDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.6.2.9 |
dsCpeNosAutoUpRLogControlDestNameDescription.rw OCTET STRING .1.3.6.1.4.1.6296.9.3.2.9.6.2.10 |
dsCpeNosAutoUpSchedCount OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.7 |
dsCpeNosAutoUpSchedCountTableDescription. SEQUENCE OF DsCpeNosAutoUpSchedCountEntry .1.3.6.1.4.1.6296.9.3.2.9.7.1 |
dsCpeNosAutoUpSchedCountEntryDescription. DsCpeNosAutoUpSchedCountEntry .1.3.6.1.4.1.6296.9.3.2.9.7.1.1 |
dsCpeNosAutoUpSchedCountPortDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.7.1.1.1 |
dsCpeNosAutoUpSchedCountSchedDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.7.1.1.2 |
dsCpeNosAutoUpSchedCountFailDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.7.1.1.3 |
dsCpeNosAutoUpSchedCountTotalDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.7.1.1.4 |
dsCpeNosAutoUpSchedCountControl OBJECT IDENTIFIER .1.3.6.1.4.1.6296.9.3.2.9.7.2 |
dsCpeNosAutoUpSchedCountControlRequestDescription.rw Enumeration .1.3.6.1.4.1.6296.9.3.2.9.7.2.1 |
dsCpeNosAutoUpSchedCountControlStatusDescription.ro Integer32 .1.3.6.1.4.1.6296.9.3.2.9.7.2.2 |
dsCpeNosAutoUpSchedCountControlTimerDescription.rw Gauge32 .1.3.6.1.4.1.6296.9.3.2.9.7.2.3 |
dsCpeNosAutoUpSchedCountControlTimeStampDescription.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6296.9.3.2.9.7.2.4 |
dsCpeNosAutoUpSchedCountControlReqResultDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.7.2.5 |
dsCpeNosAutoUpSchedCountControlPortDescription.rw Integer32 .1.3.6.1.4.1.6296.9.3.2.9.7.2.6 |
dsVdslObjectGroupDescription. Unknown .1.3.6.1.4.1.6296.9.3.2.20 |