Centrum-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Centrum-MIB.
626
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
626 total| Object Name |
|---|
centrum OBJECT IDENTIFIER .1.3.6.1.4.1.327 |
RFC1213-MIB Unknown .1.3.6.1.4.1.327 |
userLogInTrapThis trap is sent after the user logged in the AccessBuilder. TRAP-TYPE .1.3.6.1.4.1.327.0.16 |
userLogOutTrapThis trap is sent after the user logged out the AccessBuilder. TRAP-TYPE .1.3.6.1.4.1.327.0.17 |
userSessionTimeOutTrapThis trap is sent after the user logged out due to idle
time expired. TRAP-TYPE .1.3.6.1.4.1.327.0.18 |
mibDoc OBJECT IDENTIFIER .1.3.6.1.4.1.327.1 |
centrumRemote OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.1 |
portNumberThe number of communication ports (not including
console port) on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.1.1 |
portTableRemote PC access path table. SEQUENCE OF PortEntry .1.3.6.1.4.1.327.1.1.1.2 |
portEntryA path to a remote PC. PortEntry .1.3.6.1.4.1.327.1.1.1.2.1 |
portIndexA sequentially assigned index value for each
communication port on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.1 |
portIdThe type of port.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.2 |
portSlotThe slot that this port is on.ro INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.3 |
portScriptIdxThis index identifies the modem dial in/out script to be used
by this async port.rw INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.4 |
portBaudrateBaudrate of this async/sync port.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.5 |
portParityParity of this async port.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.6 |
portStopBitsNumber of stop bits for this async port.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.7 |
portDataBitsNumber of data bits for this async port.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.8 |
portCCSPEnable 3Com's proprietory data compression
algorithm.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.9 |
portPPPProbeIntervalTime duration in seconds in between two consecutive
PPP probing packets.rw INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.10 |
portPPPMaxRcvPacketLengthMaximum data field length in bytes for PPP packets.rw INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.11 |
portPPPAsyncCtrlCharAsync control character bit-map for PPP link.rw INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.12 |
portPPPProtCompressEnable protocol field compression for PPP packets.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.14 |
portPPPACCompressEnable address and control field compression for
PPP packets.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.15 |
portCRCErrorsEthernet packets received with CRC error.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.16 |
portOversizesEthernet packets received with size bigger than 1500 bytes.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.17 |
portUndersizesEthernet packets received with size smaller than 64 bytes.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.18 |
portCollisionsEthernet packet transmit failures due to collision.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.19 |
portInPacketsPackets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.20 |
portOutPacketsPackets transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.21 |
portInBytesBytes received with no error.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.22 |
portOutBytesBytes transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.23 |
portResetPortCountersWriting any value to this variable will reset all port-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.24 |
portAsyncParityErrorsNumber of async parity errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.25 |
portAsyncCharFrameErrorsNumber of async character framing errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.26 |
portAsyncOverrunErrorsNumber of async receive overrun errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.27 |
portAsyncPktCksumErrorsNumber of async packet checksum errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.28 |
portCTSStateCurrent state CTS signal.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.29 |
portDCDStateCurrent state DCD signal.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.30 |
portRIStateCurrent state RI signal.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.31 |
portSyncFcsErrorsNumber of sync packet FCS errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.32 |
portSyncMemoryErrorsNumber of sync memory errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.33 |
portSyncOverrunErrorsNumber of sync receive overrun errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.34 |
portSyncUnderrunErrorsNumber of sync transmit underrun errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.35 |
portIPCPStateCurrent connection state of PPP IPCP.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.36 |
portIPXCPStateCurrent connection state of PPP IPXCP.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.37 |
portBNCPStateCurrent connection state of PPP BNCP.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.38 |
portDriverStateCurrent Token Ring interface state.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.39 |
portSpeedCurrent Token Ring speed.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.40 |
portTotalErrorsNumber of total interface errors.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.41 |
portTransmitDiscardsNumber of packets dropped due to lack of buffers during transmit.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.42 |
portReceiveCongestionsNumber of packets dropped due to lack of buffers during receive.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.43 |
portUnknownProtocolsNumber of packets received with unknown DLC type.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.44 |
portAccessTypeAccess Type for the corresponding port: ui for normal login sequence,
arap for AppleTalk, and ppp for ppp's authentication (PAP/CHAP)rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.45 |
portDialHangUpHang up current connectionrw INTEGER .1.3.6.1.4.1.327.1.1.1.2.1.46 |
portPortDisabledThe variable disables port for dialout function.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.47 |
portArapCompressThe variable for arap compression.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.48 |
portInterFaceThe variable shows the port interface type.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.49 |
portLEDLinkThe variable shows the port link LED.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.50 |
portLEDActivityThe variable shows the port activity LED.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.51 |
portLEDFaultThe variable shows the port fault LED.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.52 |
portLinkTypeThe variable shows the ISDN port link type.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.53 |
portSwitchTypeThe variable shows the ISDN port country type.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.54 |
portSPID-1The variable shows the ISDN port SPID #1.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.55 |
portSPID-2The variable shows the ISDN port SPID #2.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.56 |
portDirectoryNo-1The variable shows the ISDN port DirectoryNo #1.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.57 |
portDirectoryNo-2The variable shows the ISDN port DirectoryNo #2.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.58 |
portLocalDialNo-1The variable shows the ISDN port LocalDialNo #1.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.59 |
portLocalDialNo-2The variable shows the ISDN port LocalDialNo #2.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.60 |
portLocalSubaddress-1The variable shows the ISDN port LocalSubaddress #1.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.61 |
portLocalSubaddress-2The variable shows the ISDN port LocalSubaddress #2.rw DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.62 |
portProtocolModeThe variable shows the ISDN port protocol mode.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.63 |
portPortResetThe variable resets ISDN port.rw Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.64 |
portIncomingCallsNumber of ISDN incoming calls.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.65 |
portOutgoingCallsNumber of ISDN outgoing calls.ro Counter .1.3.6.1.4.1.327.1.1.1.2.1.66 |
portRemoteDialNoThe variable shows the ISDN port B channel remote dial no.ro DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.67 |
portRemoteSubaddressThe variable shows the ISDN port B channel remote subaddress.ro DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.68 |
portISDNInterfaceTypeThe variable shows the interface type of the ISDN card.ro DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.69 |
portPathNameThe variable shows the path name on this port.ro DisplayString .1.3.6.1.4.1.327.1.1.1.2.1.70 |
portILCCPStateThis parameter indicates the individual link CCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.71 |
portCurISDNBChannelThis parameter indicates the physical binding channel number.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.72 |
portLoginStatusThis parameter indicates the login status for this port.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.73 |
portLastConnectBChannelThis parameter indicates last connect B channel for this ISDN line.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.74 |
portISDNPhyLineStatusThis parameter indicates physical line status for this ISDN line.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.75 |
portTEIStateThis parameter indicates TEI state for this ISDN line.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.76 |
portLayer3StatusThis parameter indicates lay 3 status for this ISDN line.ro Enumeration .1.3.6.1.4.1.327.1.1.1.2.1.77 |
portResetAllCountersWriting any value to this variable will reset all port-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.1.3 |
portSourceRouteTableSource route information table for end stations. SEQUENCE OF PortSourceRouteEntry .1.3.6.1.4.1.327.1.1.1.4 |
portSourceRouteEntryA source route path to an end station. PortSourceRouteEntry .1.3.6.1.4.1.327.1.1.1.4.1 |
portSRMacAddressMAC address of the Source Route table entry.ro OCTET STRING .1.3.6.1.4.1.327.1.1.1.4.1.1 |
portSRStateSource Route path state of the Source Route table entry.ro Enumeration .1.3.6.1.4.1.327.1.1.1.4.1.2 |
portSRTimeToLiveTime to live information of the Source Route table entry.ro Counter .1.3.6.1.4.1.327.1.1.1.4.1.3 |
portSRLargestFrameLargest frame information of the Source Route table entry.ro INTEGER .1.3.6.1.4.1.327.1.1.1.4.1.4 |
portSRDirectionPath direction of the Source Route table entry.ro Enumeration .1.3.6.1.4.1.327.1.1.1.4.1.5 |
portSRRouteDescrptPath information of the Source Route table entry.ro DisplayString .1.3.6.1.4.1.327.1.1.1.4.1.6 |
portAllLoginStatusThis parameter indicates the login status for all ports.
The format is the sequence of portID and login status.ro OCTET STRING .1.3.6.1.4.1.327.1.1.1.5 |
portTokenRingSpeedCurrent Token Ring speed.ro Enumeration .1.3.6.1.4.1.327.1.1.1.6 |
portAllLEDStatusThis parameter indicates the led status for all ports.
The format is the sequence of portID, Link LED, Activity
LED and Fault LED.ro OCTET STRING .1.3.6.1.4.1.327.1.1.1.7 |
path OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.2 |
prpaNumberThe number of remote PC access paths on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.2.1 |
prpaTableRemote PC access path table. SEQUENCE OF PrpaEntry .1.3.6.1.4.1.327.1.1.2.2 |
prpaEntryA path to a remote PC. PrpaEntry .1.3.6.1.4.1.327.1.1.2.2.1 |
prpaIndexA unique value for each remote PC access path.
The value for each path must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.327.1.1.2.2.1.1 |
prpaNameA unique user-recognizable name for each remote
PC access path.ro DisplayString .1.3.6.1.4.1.327.1.1.2.2.1.2 |
prpaTypeThe type of path. Invalid means this path no longer
exists.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.3 |
prpaPortIdxA number to uniquely identify a port for this remote
PC access path.ro INTEGER .1.3.6.1.4.1.327.1.1.2.2.1.4 |
prpaAutoHangUpThis flag indicates whether Auto-hangup feature is
enabled. If enabled, the line will be disconnected if
no traffic activity has been detected for default time
interval.rw Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.5 |
prpaInPacketsPackets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.6 |
prpaOutPacketsPackets transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.7 |
prpaInBytesBytes received with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.8 |
prpaOutBytesBytes transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.9 |
prpaResetPrpaCountersWriting any value to this variable will reset all prpa-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.2.2.1.10 |
prpaLoginStatusLogin status of this RPA path.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.11 |
prpaLoginUserNameThe name of the currently logged-in user.ro DisplayString .1.3.6.1.4.1.327.1.1.2.2.1.12 |
prpaLoginTimeThe start time (in HH:MM:SS) of current session.ro DisplayString .1.3.6.1.4.1.327.1.1.2.2.1.13 |
prpaLoginDurationThe elapsed time (in HH:MM:SS) of current session.ro DisplayString .1.3.6.1.4.1.327.1.1.2.2.1.14 |
prpaLoginAttemptsNumber of unsuccessful login attempts in this authentication
process.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.15 |
prpaLoginInPacketsNumber of correctly received packets in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.16 |
prpaLoginOutPacketsNumber of correctly transmitted packets in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.17 |
prpaLoginInBytesNumber of correctly received bytes in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.18 |
prpaLoginOutBytesNumber of correctly transmitted bytes in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.19 |
prpaLoginParityErrorsNumber of characters received with parity error in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.20 |
prpaLoginFrameErrorsNumber of characters received with framing error in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.21 |
prpaLoginOverrunErrorsNumber of receive overrun errors in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.22 |
prpaLoginCksumErrorsNumber of incoming pakets with bad checksum in this session.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.23 |
prpaFilterActionThe action to be taken by the configured this path's filters.rw Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.24 |
prpaFilterMapThis is a 16 bit bitmap corresponds to the bridge filter table.rw INTEGER .1.3.6.1.4.1.327.1.1.2.2.1.25 |
prpaLoggerMapThis is a 16 bit bitmap corresponds to the bridge logger table.rw INTEGER .1.3.6.1.4.1.327.1.1.2.2.1.26 |
prpaFilterCountThe number of packets that have been filtered.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.27 |
prpaLoggerCountThe value gives the number of incoming packets that match
this log description.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.28 |
prpaDiscardedPacketsPackets discarded.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.29 |
prpaForwardedPacketsPackets forwarded.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.30 |
prpaReceivedPacketsPackets received.ro Counter .1.3.6.1.4.1.327.1.1.2.2.1.31 |
prpaSmartFilteringThis enables/disables AccessBuilder's Smart Filtering feature.rw Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.32 |
prpaCurrentMacAddrThis parameter displays the remote client's MAC address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.2.2.1.33 |
prpaIpEthernetIIThis parameter indicates the protocol IP EthernetII running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.34 |
prpaIpSnapThis parameter indicates the protocol IP Snap running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.35 |
prpaRemotePcIpAddressThis parameter indicates the IP address running in
the remotepc client.ro IpAddress .1.3.6.1.4.1.327.1.1.2.2.1.36 |
prpaIpxEn2WithNetBIOSThis parameter indicates the protocol IPX EthernetII with NetBIOS
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.37 |
prpaIpx8023WithNetBIOSThis parameter indicates the protocol IPX 802.3 with NetBIOS
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.38 |
prpaIpx8022WithNetBIOSThis parameter indicates the protocol IPX 802.2 with NetBIOS
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.39 |
prpaIpxSnapWithNetBIOSThis parameter indicates the protocol IPX Snap with NetBIOS
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.40 |
prpaXNSThis parameter indicates the protocol XNS running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.41 |
prpaVinesEthernetIIThis parameter indicates the protocol Vines EthernetII running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.42 |
prpaVinesSnapThis parameter indicates the protocol Vines Snap running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.43 |
prpaNetBIOSThis parameter indicates the protocol NetBIOS running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.44 |
prpaDECNetThis parameter indicates the protocol DECNET running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.45 |
prpaUnknowEthernetIIThis parameter indicates the protocol Unknown EthernetII running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.46 |
prpaUnknownSapThis parameter indicates the protocol Unknown Sap running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.47 |
prpaUnknownSnapThis parameter indicates the protocol Unknown Snap running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.48 |
prpaMulticastAddressThis parameter indicates the multicast address packets recongnized
by the remotepc client.ro OCTET STRING .1.3.6.1.4.1.327.1.1.2.2.1.49 |
prpaXNSSapThis parameter indicates the protocol XNS Sap running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.50 |
prpaXNSSnapThis parameter indicates the protocol XNS Snap running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.51 |
prpaVinesSapThis parameter indicates the protocol Vines Sap running in
the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.52 |
prpaIpxEn2This parameter indicates the protocol IPX EthernetII
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.53 |
prpaIpx8023This parameter indicates the protocol IPX 802.3
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.54 |
prpaIpx8022This parameter indicates the protocol IPX 802.2
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.55 |
prpaIpxSnapThis parameter indicates the protocol IPX Snap
running in the remotepc client.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.56 |
prpaPortListThis parameter indicates the port-id list for the binding
ports on this RPA path.ro DisplayString .1.3.6.1.4.1.327.1.1.2.2.1.57 |
prpaSpoofStateThis parameter indicates the spoofing state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.58 |
prpaCCPStateThis parameter indicates the CCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.59 |
prpaIPCPStateThis parameter indicates the IPCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.60 |
prpaIPXCPStateThis parameter indicates the IPXCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.61 |
prpaBNCPStateThis parameter indicates the BNCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.62 |
prpaARAPStateThis parameter indicates the ARAP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.2.1.63 |
prpaLinkUtilThis parameter indicates the link utilization.ro INTEGER .1.3.6.1.4.1.327.1.1.2.2.1.64 |
plocalNumberThe number of local route paths on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.2.3 |
plocalTableLocal route path table. SEQUENCE OF PlocalEntry .1.3.6.1.4.1.327.1.1.2.4 |
plocalEntryA list of information for a local route path. PlocalEntry .1.3.6.1.4.1.327.1.1.2.4.1 |
plocalIndexA unique value for each network route path.
The value for each path must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.327.1.1.2.4.1.1 |
plocalNameA unique user-recognizable name for each local
route path.ro DisplayString .1.3.6.1.4.1.327.1.1.2.4.1.2 |
plocalTypeThe variable indicates whether this local route path
entry is currently effective.ro Enumeration .1.3.6.1.4.1.327.1.1.2.4.1.3 |
plocalPortIdxA number to uniquely identify a port for this local
route path. The port that is identified by this index
is the as the port identified by PortIndex in portTable.ro INTEGER .1.3.6.1.4.1.327.1.1.2.4.1.4 |
plocalInPacketsPackets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.5 |
plocalOutPacketsPackets transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.6 |
plocalInBytesBytes received with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.7 |
plocalOutBytesBytes transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.8 |
plocalResetPlocalCountersWriting any value to this variable will reset all plocal-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.2.4.1.9 |
plocalFilterActionThe action to be taken by the configured this path's filters.rw Enumeration .1.3.6.1.4.1.327.1.1.2.4.1.10 |
plocalFilterMapThis is a 16 bit bitmap corresponds to the bridge filetr table.rw INTEGER .1.3.6.1.4.1.327.1.1.2.4.1.11 |
plocalLoggerMapThis is a 16 bit bitmap corresponds to the bridge logger table.rw INTEGER .1.3.6.1.4.1.327.1.1.2.4.1.12 |
plocalFilterCountThe number of packets that have been filtered.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.13 |
plocalLoggerCountThe value gives the number of incoming packets that match
this log description.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.14 |
plocalDiscardedPacketsPackets discarded.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.15 |
plocalForwardedPacketsPackets forwarded.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.16 |
plocalReceivedPacketsPackets received.ro Counter .1.3.6.1.4.1.327.1.1.2.4.1.17 |
prmtNumberThe number of route paths on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.2.5 |
prmtTableRoute path table. SEQUENCE OF PrmtEntry .1.3.6.1.4.1.327.1.1.2.6 |
prmtEntryA list of information for a route path. PrmtEntry .1.3.6.1.4.1.327.1.1.2.6.1 |
prmtIndexA unique value for each network route path.
The value for each path must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.1 |
prmtNameA unique user-recognizable name for each remote
PC access path.rw DisplayString .1.3.6.1.4.1.327.1.1.2.6.1.2 |
prmtTypeThe variable indicates whether this remote route path
entry is currently effective.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.3 |
prmtInitiatorUsed on remote path only. This flag tells whether this
side should initiate the connection.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.4 |
prmtCongestThresholdUsed on remote paths with on-demand ports only. It is
used to determine when a on-demand port be started.rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.5 |
prmtScheduleType1The variable is meaningful only on paths with schedule port.
It described the port's schedule type - daily, weekly or
monthly.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.6 |
prmtDaysScheduled1The variable is meaningful only on paths with schedule port.
A bit map of days on which each '1' bit represents
a day that the port will be scheduled. The least
significant bit indicates the 1st day in a period
(for week, it's Monday; for month, it's the first
day in a month.)rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.7 |
prmtStartTime1The variable is meaningful only on paths with schedule port.
This describes the scheduled port connection period
in StartHour:StartMinute format.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.6.1.8 |
prmtHowLong1The variable is meaningful only on paths with schedule port.
This describes the scheduled port connection period
in DurationHour:DurationMinute format.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.6.1.9 |
prmtScheduleType2The variable is meaningful only on paths with schedule port.
It described the port's schedule type - daily, weekly or
monthly.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.10 |
prmtDaysScheduled2The variable is meaningful only on paths with schedule port.
A bit map of days on which each '1' bit represents
a day that the port will be scheduled. The least
significant bit indicates the 1st day in a period
(for week, it's Monday; for month, it's the first
day in a month.)rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.11 |
prmtStartTime2The variable is meaningful only on paths with schedule port.
This describes the scheduled port connection period
in StartHour:StartMinute format.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.6.1.12 |
prmtHowLong2The variable is meaningful only on paths with schedule port.
This describes the scheduled port connection period
in DurationHour:DurationMinute format.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.6.1.13 |
prmtInPacketsPackets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.14 |
prmtOutPacketsPackets transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.15 |
prmtInBytesBytes received with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.16 |
prmtOutBytesBytes transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.17 |
prmtResetPrmtCountersWriting any value to this variable will reset all prmt-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.18 |
prmtFilterActionThe action to be taken by the configured this path's filters.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.19 |
prmtFilterMapThis is a 16 bit bitmap corresponds to the bridge filetr table.rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.20 |
prmtLoggerMapThis is a 16 bit bitmap corresponds to the bridge logger table.rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.21 |
prmtFilterCountThe number of packets that have been filtered.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.22 |
prmtLoggerCountThe value gives the number of incoming packets that match
this log description.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.23 |
prmtDiscardedPacketsPackets discarded.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.24 |
prmtForwardedPacketsPackets forwarded.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.25 |
prmtReceivedPacketsPackets received.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.26 |
prmtSmartFilteringThis enables/disables AccessBuilder's Smart Filtering feature.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.27 |
prmtOutCongestionsNumber of packet transmit congestions.ro Counter .1.3.6.1.4.1.327.1.1.2.6.1.28 |
prmtRmtRouterNameRemote router name.rw DisplayString .1.3.6.1.4.1.327.1.1.2.6.1.29 |
prmtTypeSelectionPath type selection.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.30 |
prmtAsyncPortNoNumber of async ports for Backup, On-demand and Schedule type.rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.31 |
prmtISDNPortNoNumber of ISDN ports for Backup, On-demand and Schedule type.rw INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.32 |
prmtISDNReqBaudRateISDN required baudrate for satisfying all cases.rw Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.33 |
prmtSpoofStateThis parameter indicates the spoofing state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.34 |
prmtCCPStateThis parameter indicates the CCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.35 |
prmtIPCPStateThis parameter indicates the IPCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.36 |
prmtIPXCPStateThis parameter indicates the IPXCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.37 |
prmtBNCPStateThis parameter indicates the BNCP state.ro Enumeration .1.3.6.1.4.1.327.1.1.2.6.1.38 |
prmtLinkUtilThis parameter indicates the link utilization.ro INTEGER .1.3.6.1.4.1.327.1.1.2.6.1.39 |
prmtPMPortListThis parameter indicates the port-id list for the binding
permenant ports on this Remote path.ro DisplayString .1.3.6.1.4.1.327.1.1.2.6.1.40 |
prmtBUPortListThis parameter indicates the port-id list for the binding
backup ports on this Remote path.ro DisplayString .1.3.6.1.4.1.327.1.1.2.6.1.41 |
prmtODPortListThis parameter indicates the port-id list for the binding
on-demand ports on this Remote path.ro DisplayString .1.3.6.1.4.1.327.1.1.2.6.1.42 |
prmtSCPortListThis parameter indicates the port-id list for the binding
schedule ports on this Remote path.ro DisplayString .1.3.6.1.4.1.327.1.1.2.6.1.43 |
prmtPortTableRoute path port table. SEQUENCE OF PrmtPortEntry .1.3.6.1.4.1.327.1.1.2.7 |
prmtPortEntryA list of information for each port associated with a
route path. PrmtPortEntry .1.3.6.1.4.1.327.1.1.2.7.1 |
prmtPortPrmtIdxThe route path on which this entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of prmtIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.2.7.1.1 |
prmtPortPortIdxThe port on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of portIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.2.7.1.2 |
prmtPortTypeUsed on remote path only. This vaiable tells the type of
port.rw Enumeration .1.3.6.1.4.1.327.1.1.2.7.1.3 |
prmtPortPhoneNumberUsed on remote path only. The phone number to be used by
this type of port in the path.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.7.1.4 |
prmtPortDirectoryNoUsed on remote path only. The directory number to be used by
this type of port in the path.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.7.1.5 |
pathResetAllCountersWriting any value to this variable will reset all path-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.2.8 |
prmtPhoneTableRouter path phone table for Backup, On-demand and Schedule type. SEQUENCE OF PrmtPhoneEntry .1.3.6.1.4.1.327.1.1.2.9 |
prmtPhoneEntryA list of phone data for each port associated with a
route path. PrmtPhoneEntry .1.3.6.1.4.1.327.1.1.2.9.1 |
prmtPhonePrmtIdxPath index for phone table.ro INTEGER .1.3.6.1.4.1.327.1.1.2.9.1.1 |
prmtPhoneIdxPhone table index.ro INTEGER .1.3.6.1.4.1.327.1.1.2.9.1.2 |
prmtPhoneTypePhone type for remote path.rw Enumeration .1.3.6.1.4.1.327.1.1.2.9.1.3 |
prmtPhonePhoneNumberPhone number in the phone table.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.9.1.4 |
prmtPhoneDirectoryNoDirectory number in the phone table.rw OCTET STRING .1.3.6.1.4.1.327.1.1.2.9.1.5 |
crip OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.3 |
ipRpa OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.3.1 |
ipRpaNumberThe number of IP remote PC paths on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.3.1.1 |
ipRpaTableRemote PC access path table. SEQUENCE OF IpRpaEntry .1.3.6.1.4.1.327.1.1.3.1.2 |
ipRpaEntryA path to a remote PC. IpRpaEntry .1.3.6.1.4.1.327.1.1.3.1.2.1 |
ipRpaIndexThe RPA path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same RPA path as identified by the same value
of prpaIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.3.1.2.1.1 |
ipRpaCurrentClientIpAddressThe current or last logged-in SLIP remote PC's IP address.ro IpAddress .1.3.6.1.4.1.327.1.1.3.1.2.1.2 |
ipRpaConfigClientIpAddressThe administrator-assigned PPP remote PC's IP address. This is
the IP address to be used by any PPP remote PC dial in to this port.rw IpAddress .1.3.6.1.4.1.327.1.1.3.1.2.1.3 |
ipRpaTcpHdrCompressThe VJ Compression (RFC 1144 TCP/IP Header Compression) of the PPPrw Enumeration .1.3.6.1.4.1.327.1.1.3.1.2.1.4 |
ipRpaTypeThe type of iprpath. Invalid means this path no longer
exists.ro Enumeration .1.3.6.1.4.1.327.1.1.3.1.2.1.5 |
ipRpaBootpEnabledThe variable enables BootP server on the AccessBuilder.rw Enumeration .1.3.6.1.4.1.327.1.1.3.1.3 |
ipRpaRarpEnabledThe variable enables Reverse ARP server on the AccessBuilder.rw Enumeration .1.3.6.1.4.1.327.1.1.3.1.4 |
ipRpaBootpOrRarpRequiredThe variable forces remote clients to run BootP or Reverse ARP
protocol before accessing IP hosts on the network.rw Enumeration .1.3.6.1.4.1.327.1.1.3.1.5 |
ipRpaBootpInPacketsBootP packets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.3.1.6 |
ipRpaBootpOutPacketsBootP packets sent with no error.ro Counter .1.3.6.1.4.1.327.1.1.3.1.7 |
ipRpaRarpInPacketsReverse ARP packets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.3.1.8 |
ipRpaRarpOutPacketsReverse ARP packets sent with no error.ro Counter .1.3.6.1.4.1.327.1.1.3.1.9 |
ipRpaResetAllRasCountersWriting any value to this variable will reset all Bootp and
Reverse ARP counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.3.1.10 |
ipRpaPRPAIpHdrCompressTurn on/off IP header compression for remote access path.rw Enumeration .1.3.6.1.4.1.327.1.1.3.1.11 |
ipRt OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.3.2 |
ipSRouteNumberThe number of IP static routes on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.3.2.1 |
ipSRouteTableIP static route table. SEQUENCE OF IpSRouteEntry .1.3.6.1.4.1.327.1.1.3.2.2 |
ipSRouteEntryA list of information for each static route. IpSRouteEntry .1.3.6.1.4.1.327.1.1.3.2.2.1 |
ipSRouteIndexA statics route number of the static route for which
the entry contains the route's information.ro INTEGER .1.3.6.1.4.1.327.1.1.3.2.2.1.1 |
ipSRouteNameAn user-defined name for the static route.rw DisplayString .1.3.6.1.4.1.327.1.1.3.2.2.1.2 |
ipSRouteTypeThe variable indicates whether this static route
entry is currently effective.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.2.1.3 |
ipSRoutePathTypeThe variable indicates which route path table (local or
remote) this route uses.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.2.1.4 |
ipSRoutePathIdxThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of plocalIndex or prmtIndex depending on path type.rw INTEGER .1.3.6.1.4.1.327.1.1.3.2.2.1.5 |
ipSRouteDestIpAddressThe destination network's IP address.rw IpAddress .1.3.6.1.4.1.327.1.1.3.2.2.1.6 |
ipSRouteNextRouterThe next router's IP address in this route.rw IpAddress .1.3.6.1.4.1.327.1.1.3.2.2.1.7 |
ipSRouteHopCountNumber of hop needed to get to the destination network.rw INTEGER .1.3.6.1.4.1.327.1.1.3.2.2.1.8 |
ipPLocalNumberThe number of IP dynamic routes on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.3.2.3 |
ipPLocalTableIP dynamic route table. SEQUENCE OF IpPLocalEntry .1.3.6.1.4.1.327.1.1.3.2.4 |
ipPLocalEntryA list of information for a IP dynamic route. IpPLocalEntry .1.3.6.1.4.1.327.1.1.3.2.4.1 |
ipPLocalIndexThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of plocalIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.3.2.4.1.1 |
ipPLocalIpAddressThis path's IP address.rw IpAddress .1.3.6.1.4.1.327.1.1.3.2.4.1.2 |
ipPLocalNetMaskThe netmask of the network that is attached to the path.rw IpAddress .1.3.6.1.4.1.327.1.1.3.2.4.1.3 |
ipPLocalBcastAddrThe least significant bit of the IP broadcast address
to network that is attached to the path.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.4.1.4 |
ipPRmtNumberThe number of IP dynamic routes on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.3.2.5 |
ipPRmtTableIP dynamic route table. SEQUENCE OF IpPRmtEntry .1.3.6.1.4.1.327.1.1.3.2.6 |
ipPRmtEntryA list of information for a IP dynamic route. IpPRmtEntry .1.3.6.1.4.1.327.1.1.3.2.6.1 |
ipPRmtIndexThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of prmtIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.3.2.6.1.1 |
ipPRmtIpAddressThis path's IP address.rw IpAddress .1.3.6.1.4.1.327.1.1.3.2.6.1.2 |
ipPRmtNetMaskThe netmask of the network that is attached to the path.rw IpAddress .1.3.6.1.4.1.327.1.1.3.2.6.1.3 |
ipPRmtBcastAddrThe least significant bit of the IP broadcast address
to network that is attached to the path.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.6.1.4 |
ipPRmtRipUpdateThe method of sending IP RIP packets and updating routing
database for this path.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.6.1.5 |
ipPRmtTypeIndication of validity of this entry.ro Enumeration .1.3.6.1.4.1.327.1.1.3.2.6.1.6 |
ipPRmtTcpHdrCompressThe VJ Compression (TCP/IP Header Compression) of the PPPrw Enumeration .1.3.6.1.4.1.327.1.1.3.2.6.1.7 |
ipRtUpdateTimeThe time interval (in seconds) at which the routing information
is being updated.rw INTEGER .1.3.6.1.4.1.327.1.1.3.2.7 |
ipRtRipEnabledRIP protocol enable/disable flag.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.8 |
ipRtEnabledRouter function enable/disable flag.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.9 |
ipRtDefaultTTLThe default time-to-live value for IP messages.rw INTEGER .1.3.6.1.4.1.327.1.1.3.2.10 |
ipRtPoisonReverseThis flag tells whether to enable Poison-Reverse feature
in RIP protocol.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.11 |
ipRtResetAllCountersWriting any value to this variable will reset all port-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.3.2.12 |
ipRtInPacketsIP packets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.3.2.13 |
ipRtOutPacketsIP packets transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.3.2.14 |
ipRtDefaultRouterAddressThe default router's IP address.rw IpAddress .1.3.6.1.4.1.327.1.1.3.2.15 |
ipRtDefaultRouterPathTypeThe variable indicates which route path table (local or
remote) this route uses.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.16 |
ipRtDefaultRouterPathIdxThe variable indicates the index to the path table (local or
remote) this route uses.rw INTEGER .1.3.6.1.4.1.327.1.1.3.2.17 |
ipRtDiscardNBBcastPktsThe variable indicates to discard or forward the NETBIOS
broadcast packets to remote dial-in ports.rw Enumeration .1.3.6.1.4.1.327.1.1.3.2.18 |
ipx OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.4 |
ipxRpa OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.4.1 |
ipxRpaNetNumberThe IPX network address for all RPA paths.rw OCTET STRING .1.3.6.1.4.1.327.1.1.4.1.1 |
ipxRpaNumberThe number of IPX remote PC paths on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.4.1.2 |
ipxRpaTableIPX Remote PC access path table. SEQUENCE OF IpxRpaEntry .1.3.6.1.4.1.327.1.1.4.1.3 |
ipxRpaEntryA path to a IPX remote PC. IpxRpaEntry .1.3.6.1.4.1.327.1.1.4.1.3.1 |
ipxRpaIndexThe RPA path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same RPA path as identified by the same value
of prpaIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.4.1.3.1.1 |
ipxRpaCurrHostAddrCurrent IPX Host Addressro OCTET STRING .1.3.6.1.4.1.327.1.1.4.1.3.1.2 |
ipxRt OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.4.2 |
ipxSRouteNumberThe number of IPX static routes on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.1 |
ipxSRouteTableIPX static route table. SEQUENCE OF IpxSRouteEntry .1.3.6.1.4.1.327.1.1.4.2.2 |
ipxSRouteEntryA list of information for a IPX static route. IpxSRouteEntry .1.3.6.1.4.1.327.1.1.4.2.2.1 |
ipxSRouteIndexA statics route number of the IPX static route for which
the entry contains the route's information.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.2.1.1 |
ipxSRouteNameAn user-defined name for the static route.rw DisplayString .1.3.6.1.4.1.327.1.1.4.2.2.1.2 |
ipxSRouteTypeThe variable indicates whether this static route
entry is currently effective.rw Enumeration .1.3.6.1.4.1.327.1.1.4.2.2.1.3 |
ipxSRoutePathTypeThe variable indicates which route path table (local or
remote) this route uses.rw Enumeration .1.3.6.1.4.1.327.1.1.4.2.2.1.4 |
ipxSRoutePathIdxThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of plocalIndex or prmtIndex depending on path type.rw INTEGER .1.3.6.1.4.1.327.1.1.4.2.2.1.5 |
ipxSRouteDestNetNumberThe destination network's IPX network address.rw OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.2.1.6 |
ipxSRouteNextHostAddressThe host address of next IPX router in this route.rw OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.2.1.8 |
ipxSRouteHopCountNumber of hop needed to get to the destination network.rw INTEGER .1.3.6.1.4.1.327.1.1.4.2.2.1.9 |
ipxPLocalNumberThe number of IPX dynamic routes on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.3 |
ipxPLocalTableIPX dynamic routes table. SEQUENCE OF IpxPLocalEntry .1.3.6.1.4.1.327.1.1.4.2.4 |
ipxPLocalEntryA list of information for an IPX dynamic route. IpxPLocalEntry .1.3.6.1.4.1.327.1.1.4.2.4.1 |
ipxPLocalIndexThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of plocalIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.4.1.1 |
ipxPLocalNetNumberThe network address of the network that is attached
to the path.rw OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.4.1.2 |
ipxPLocalDataLinkTypeFor local path only. The type data link header used in this path.rw Enumeration .1.3.6.1.4.1.327.1.1.4.2.4.1.3 |
ipxPRmtNumberThe number of IPX dynamic routes on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.5 |
ipxPRmtTableIPX dynamic routes table. SEQUENCE OF IpxPRmtEntry .1.3.6.1.4.1.327.1.1.4.2.6 |
ipxPRmtEntryA list of information for an IPX dynamic route. IpxPRmtEntry .1.3.6.1.4.1.327.1.1.4.2.6.1 |
ipxPRmtIndexThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of prmtIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.6.1.1 |
ipxPRmtNetNumberThe network address of the network that is attached
to the path.rw OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.6.1.2 |
ipxPRmtNripUpdateThe method of sending NetWare RIP packets and updating
routing database for this path.rw Enumeration .1.3.6.1.4.1.327.1.1.4.2.6.1.3 |
ipxPRmtTypeIndication of validity of this entry.ro Enumeration .1.3.6.1.4.1.327.1.1.4.2.6.1.4 |
ipxRtUpdateTimeThe time interval (in seconds) at which the routing information
is being updated.rw INTEGER .1.3.6.1.4.1.327.1.1.4.2.7 |
ipxRtEnabledIPX router function enable/disable flag.rw Enumeration .1.3.6.1.4.1.327.1.1.4.2.8 |
ipxRtRipEnabledIPX RIP protocol enable/disable flag.rw Enumeration .1.3.6.1.4.1.327.1.1.4.2.9 |
ipxRtResetAllCountersWriting any value to this variable will reset all port-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.4.2.11 |
ipxRtInPacketsIPX packets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.4.2.12 |
ipxRtOutPacketsIPX packets transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.4.2.13 |
ipxRtRipNumberThe number of RIP entries on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.14 |
ipxRtRipTableThis table contains IPX RIP information. Each entry
corresponds to a route description. SEQUENCE OF IpxRtRipEntry .1.3.6.1.4.1.327.1.1.4.2.15 |
ipxRtRipEntryA list of information for an IPX RIP entry. IpxRtRipEntry .1.3.6.1.4.1.327.1.1.4.2.15.1 |
ipxRtRipDestNetNumberThe destination network's IPX network address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.15.1.1 |
ipxRtRipPathTypeThe variable indicates which route path table (local or
remote) this route uses.ro Enumeration .1.3.6.1.4.1.327.1.1.4.2.15.1.2 |
ipxRtRipPathIdxThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of plocalIndex or prmtIndex depending on path type.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.15.1.3 |
ipxRtRipNextHostAddressThe host address of next IPX router in this route.ro OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.15.1.4 |
ipxRtRipHopCountNumber of hop needed to get to the destination network.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.15.1.5 |
ipxRtRipTicksNumber of ticks needed to get to the destination network.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.15.1.6 |
ipxRtRipRouteTypeIndication of how the route is entered.ro Enumeration .1.3.6.1.4.1.327.1.1.4.2.15.1.7 |
ipxRtSapNumberThe number of SAP entries on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.16 |
ipxRtSapTableThis table contains IPX SAP information. Each entry
corresponds to a route description. SEQUENCE OF IpxRtSapEntry .1.3.6.1.4.1.327.1.1.4.2.17 |
ipxRtSapEntryA list of information for an IPX SAP entry. IpxRtSapEntry .1.3.6.1.4.1.327.1.1.4.2.17.1 |
ipxRtSapIndexA sequentially assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.17.1.1 |
ipxRtSapServiceNameThe name of the service.ro OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.17.1.2 |
ipxRtSapServiceTypeThe variable indicates which type of service this is.ro INTEGER .1.3.6.1.4.1.327.1.1.4.2.17.1.3 |
ipxRtSapServerNetNumberThe network address of next IPX router in this route.ro OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.17.1.4 |
ipxRtSapServerHostAddressThe host address of next IPX router in this route.ro OCTET STRING .1.3.6.1.4.1.327.1.1.4.2.17.1.5 |
ipxSpoofingTimeThe time which centrum remote server acts as proxyrw INTEGER .1.3.6.1.4.1.327.1.1.4.2.18 |
ipxRtDoNBPropagationThe variable indicates to flood the NETBIOS IPX propagation
packets (type 20) to LAN and remote router.rw Enumeration .1.3.6.1.4.1.327.1.1.4.2.19 |
brg OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.5 |
brgFilterNumberThe number of bridge filters on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.5.1 |
brgFilterTableThis table contains bridge filter information. Each entry
corresponds to a filter description. Each filter description
can consist of up to four conditions. When a incoming
packet matches all the conditions, the packet is filtered. SEQUENCE OF BrgFilterEntry .1.3.6.1.4.1.327.1.1.5.2 |
brgFilterEntryA list of information for a bridge filter. BrgFilterEntry .1.3.6.1.4.1.327.1.1.5.2.1 |
brgFilterIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.1 |
brgFilterNameA unique user-recognizable name for each remote
bridge filter defined.rw DisplayString .1.3.6.1.4.1.327.1.1.5.2.1.2 |
brgFilterTypeThe indicates whether this filter is defined or not.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.3 |
brgFilterMask1OffsetThe byte offset of the first mask of this filter.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.4 |
brgFilterMask1ValueThe value of the first mask of this filter. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.5 |
brgFilterMask1TypeThe type of the 1st mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.6 |
brgFilterMask1SizeThe size (number of bytes covered by this mask) of the 1st
mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.7 |
brgFilterMask2OffsetThe byte offset of the 2nd mask of this filter.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.8 |
brgFilterMask2ValueThe value of the 2nd mask of this filter. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.9 |
brgFilterMask2TypeThe type of the 2nd mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.10 |
brgFilterMask2SizeThe size (number of bytes covered by this mask) of the 2nd
mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.11 |
brgFilterMask3OffsetThe byte offset of the 3rd mask of this filter.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.12 |
brgFilterMask3ValueThe value of the 3rd mask of this filter. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.13 |
brgFilterMask3TypeThe type of the 3rd mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.14 |
brgFilterMask3SizeThe size (number of bytes covered by this mask) of the 3rd
mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.15 |
brgFilterMask4OffsetThe byte offset of the 4th mask of this filter.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.16 |
brgFilterMask4ValueThe value of the 4th mask of this filter. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.2.1.17 |
brgFilterMask4TypeThe type of the 4th mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.18 |
brgFilterMask4SizeThe size (number of bytes covered by this mask) of the 4th
mask of this filter.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.19 |
brgFilterSkipRiiSpecifying if source route field should be skipped for
fitler offset.rw Enumeration .1.3.6.1.4.1.327.1.1.5.2.1.20 |
brgLoggerNumberThe number of bridge logger on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.5.3 |
brgLoggerTableThis table contains bridge logger information. Each entry
corresponds to a logging description. Each logging description
can consist of up to four conditions. When a incoming
packet matches all the conditions, the event is logged. SEQUENCE OF BrgLoggerEntry .1.3.6.1.4.1.327.1.1.5.4 |
brgLoggerEntryA description of bridge logger. BrgLoggerEntry .1.3.6.1.4.1.327.1.1.5.4.1 |
brgLoggerIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.1 |
brgLoggerNameA unique user-recognizable name for each remote
bridge logger defined.rw DisplayString .1.3.6.1.4.1.327.1.1.5.4.1.2 |
brgLoggerTypeThe validity of this logger entry.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.3 |
brgLoggerMask1OffsetThe byte offset of the 4th mask of this logger.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.4 |
brgLoggerMask1ValueThe value of the 4th mask of this logger. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.5 |
brgLoggerMask1TypeThe type of the 4th mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.6 |
brgLoggerMask1SizeThe size (number of bytes covered by this mask) of the 1st
mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.7 |
brgLoggerMask2OffsetThe byte offset of the 4th mask of this logger.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.8 |
brgLoggerMask2ValueThe value of the 4th mask of this logger. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.9 |
brgLoggerMask2TypeThe type of the 4th mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.10 |
brgLoggerMask2SizeThe size (number of bytes covered by this mask) of the 2nd
mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.11 |
brgLoggerMask3OffsetThe byte offset of the 4th mask of this logger.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.12 |
brgLoggerMask3ValueThe value of the 4th mask of this logger. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.13 |
brgLoggerMask3TypeThe type of the 4th mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.14 |
brgLoggerMask3SizeThe size (number of bytes covered by this mask) of the 3rd
mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.15 |
brgLoggerMask4OffsetThe byte offset of the 4th mask of this logger.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.16 |
brgLoggerMask4ValueThe value of the 4th mask of this logger. This can be
a byte, word or long value.rw INTEGER .1.3.6.1.4.1.327.1.1.5.4.1.17 |
brgLoggerMask4TypeThe type of the 4th mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.18 |
brgLoggerMask4SizeThe size (number of bytes covered by this mask) of the 4th
mask of this logger.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.19 |
brgLoggerSkipRiiSpecifying if source route field should be skipped for
logger offset.rw Enumeration .1.3.6.1.4.1.327.1.1.5.4.1.20 |
brgPLocalNumberThe number of local bridge path on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.5.5 |
brgPLocalTableThis table contains bridge path (equivalent to port in 802.1d
specification) information. SEQUENCE OF BrgPLocalEntry .1.3.6.1.4.1.327.1.1.5.6 |
brgPLocalEntryA description of bridge path entry. BrgPLocalEntry .1.3.6.1.4.1.327.1.1.5.6.1 |
brgPLocalIndexThe path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same path as identified by the same value
of plocalIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.5.6.1.1 |
brgPLocalEnabledEnable this path as one of the bridge port.rw Enumeration .1.3.6.1.4.1.327.1.1.5.6.1.2 |
brgStpPLocalPriorityThe value of the priority field which is contained in the
first octet of the Port ID. The other octet of the Port ID
is given by the value of brgPLocalIndex.rw INTEGER .1.3.6.1.4.1.327.1.1.5.6.1.3 |
brgStpPLocalCostThe contribution of this port to the path cost of paths
towards the spanning tree root which include this port.rw INTEGER .1.3.6.1.4.1.327.1.1.5.6.1.4 |
brgStpPLocalDesigRootThe unique Bridge Identifier of the Bridge recorded as the
Root in the Configuration BPDUs transmitted by the Designated
Bridge for the segment to which the port is attached.ro OCTET STRING .1.3.6.1.4.1.327.1.1.5.6.1.5 |
brgStpPLocalDesigCostThe path cost of the Designated Port of the segment
connected to the port. This value is compared to the Root Path
Cost field in received bridge PDUs.ro INTEGER .1.3.6.1.4.1.327.1.1.5.6.1.6 |
brgStpPLocalDesigBridgeThe Bridge ID of the bridge which this port considers to be
the Designated Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.327.1.1.5.6.1.7 |
brgStpPLocalDesigPathThe Port ID of the port on the Designated Bridge for this
port's segment.ro INTEGER .1.3.6.1.4.1.327.1.1.5.6.1.8 |
brgStpPLocalPathStateThe Spanning Tree state of the port.ro Enumeration .1.3.6.1.4.1.327.1.1.5.6.1.9 |
brgPRmtNumberThe number of remote bridge path on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.5.7 |
brgPRmtTableThis table contains bridge path (equivalent to port in 802.1d
specification) information. SEQUENCE OF BrgPRmtEntry .1.3.6.1.4.1.327.1.1.5.8 |
brgPRmtEntryA description of bridge path entry. BrgPRmtEntry .1.3.6.1.4.1.327.1.1.5.8.1 |
brgPRmtIndexThe path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same path as identified by the same value
of prmtIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.5.8.1.1 |
brgPRmtEnabledEnable this path as one of the bridge port.rw Enumeration .1.3.6.1.4.1.327.1.1.5.8.1.2 |
brgStpPRmtPriorityThe value of the priority field which is contained in the
first octet of the Port ID. The other octet of the Port ID
is given by the value of brgPRmtIndex.rw INTEGER .1.3.6.1.4.1.327.1.1.5.8.1.3 |
brgStpPRmtCostThe contribution of this port to the path cost of paths
towards the spanning tree root which include this port.rw INTEGER .1.3.6.1.4.1.327.1.1.5.8.1.4 |
brgStpPRmtDesigRootThe unique Bridge Identifier of the Bridge recorded as the
Root in the Configuration BPDUs transmitted by the Designated
Bridge for the segment to which the port is attached.ro OCTET STRING .1.3.6.1.4.1.327.1.1.5.8.1.5 |
brgStpPRmtDesigCostThe path cost of the Designated Port of the segment
connected to the port. This value is compared to the Poot Path
Cost field in received bridge PDUs.ro INTEGER .1.3.6.1.4.1.327.1.1.5.8.1.6 |
brgStpPRmtDesigBridgeThe Bridge ID of the bridge which this port considers to be
the Designated Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.327.1.1.5.8.1.7 |
brgStpPRmtDesigPathThe Port ID of the port on the Designated Bridge for this
port's segment.ro INTEGER .1.3.6.1.4.1.327.1.1.5.8.1.8 |
brgStpPRmtPathStateThe Spanning Tree state of the port.ro Enumeration .1.3.6.1.4.1.327.1.1.5.8.1.9 |
brgMisc OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.5.9 |
brgSpanningTreeProtocolThis flag controls whether Spanning Tree protocol
feature be enabled in this node.rw Enumeration .1.3.6.1.4.1.327.1.1.5.9.1 |
brgResetAllCountersWriting any value to this variable will reset all brg-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.5.9.2 |
brgAutoFtrEnabledThis flag controls whether auto filter feature is enabled
in this node.rw Enumeration .1.3.6.1.4.1.327.1.1.5.9.3 |
brgPRPASmartFilteringThis enables/disables AccessBuilder's Smart Filtering feature.rw Enumeration .1.3.6.1.4.1.327.1.1.5.9.4 |
brgPRPAFilterActionThe action to be taken for all remote access path's filters.rw Enumeration .1.3.6.1.4.1.327.1.1.5.9.5 |
brgPRPAFilterMapThis is a 16 bit bitmap corresponds to the bridge filter table.rw Enumeration .1.3.6.1.4.1.327.1.1.5.9.6 |
brgPRPALoggerMapThis is a 16 bit bitmap corresponds to the bridge logger table.rw Enumeration .1.3.6.1.4.1.327.1.1.5.9.7 |
brgMacHdrCompTurn on/off bridge MAC header compression.rw Enumeration .1.3.6.1.4.1.327.1.1.5.9.8 |
brgLearnedTableSpanning tree bridge port table. SEQUENCE OF BrgLearnedEntry .1.3.6.1.4.1.327.1.1.5.10 |
brgLearnedEntryA list of information for a learned address entry. BrgLearnedEntry .1.3.6.1.4.1.327.1.1.5.10.1 |
brgLearnedAddressA MAC address for the bridge has learned.ro OCTET STRING .1.3.6.1.4.1.327.1.1.5.10.1.1 |
brgLearnedPathTypeThe variable indicates from which path table (local or
remote) this address is leaned.ro Enumeration .1.3.6.1.4.1.327.1.1.5.10.1.2 |
brgLearnedPathIdxThe path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of plocalIndex or prmtIndex depending on path type.ro INTEGER .1.3.6.1.4.1.327.1.1.5.10.1.3 |
brgLearnedAgeThe relative newness of the learned address.ro Enumeration .1.3.6.1.4.1.327.1.1.5.10.1.4 |
brgTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.5.11 |
brgLocalRingNumberThe ring number on LAN side interface of the AccessBuilder.rw INTEGER .1.3.6.1.4.1.327.1.1.5.11.1 |
brgProxyRingNumberThe ring number on WAN side interface of the AccessBuilder.rw INTEGER .1.3.6.1.4.1.327.1.1.5.11.2 |
brgBridgeNumberThe bridge number assigned to AccessBuilder.rw INTEGER .1.3.6.1.4.1.327.1.1.5.11.3 |
admin OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.6 |
adminUserNumberThe number of users registered on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.6.1 |
adminUserTableUser table. SEQUENCE OF AdminUserEntry .1.3.6.1.4.1.327.1.1.6.2 |
adminUserEntryA list of information for a user. AdminUserEntry .1.3.6.1.4.1.327.1.1.6.2.1 |
adminUserIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.6.2.1.1 |
adminUserNameThe user login name.rw DisplayString .1.3.6.1.4.1.327.1.1.6.2.1.2 |
adminUserTypeThis value controls whether the user be given superuser, administrator
or regular user priviledge while in User Interface session.rw Enumeration .1.3.6.1.4.1.327.1.1.6.2.1.3 |
adminUserPasswordThe user login password.ro OCTET STRING .1.3.6.1.4.1.327.1.1.6.2.1.4 |
adminUserCallBackPhoneThis string controls whether the system should disconnect
the line and call back to the user for security reason. If
this is a NULL string, the system does not call back. Otherwise,
the system calls back with number given by this string.ro OCTET STRING .1.3.6.1.4.1.327.1.1.6.2.1.5 |
adminEncryptUserPasswordThe encrypted user password is for configurator to change
user password by a authentication algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.2.1.6 |
adminEncryptCallBackPhoneThe encrypted call back phone no. is for configurator to
change user password by a authentication algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.2.1.7 |
adminCommNumberThe number of SNMP communities defined on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.6.3 |
adminCommTableSNMP community table. SEQUENCE OF AdminCommEntry .1.3.6.1.4.1.327.1.1.6.4 |
adminCommEntryA list of information for a SNMP community. AdminCommEntry .1.3.6.1.4.1.327.1.1.6.4.1 |
adminCommIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.6.4.1.1 |
adminCommNameThe community name.rw DisplayString .1.3.6.1.4.1.327.1.1.6.4.1.2 |
adminCommTypeThe community's access type.rw Enumeration .1.3.6.1.4.1.327.1.1.6.4.1.3 |
adminCommMgrIpAddressThe community network manager's IP address.rw IpAddress .1.3.6.1.4.1.327.1.1.6.4.1.4 |
adminCommMgrIpxNetNumberThe community network manager's IPX network ID.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.4.1.5 |
adminCommMgrMacAddressThe community network manager's MAC addressrw OCTET STRING .1.3.6.1.4.1.327.1.1.6.4.1.6 |
adminScriptNumberThe number of dialing scripts on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.6.5 |
adminScriptTableDialing script table. SEQUENCE OF AdminScriptEntry .1.3.6.1.4.1.327.1.1.6.6 |
adminScriptEntryA list of dialing script information. AdminScriptEntry .1.3.6.1.4.1.327.1.1.6.6.1 |
adminScriptIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.6.6.1.1 |
adminScriptNameThe name of the script.ro DisplayString .1.3.6.1.4.1.327.1.1.6.6.1.2 |
adminScriptTypeThe script's type. A built-in script's type can not be changed.rw Enumeration .1.3.6.1.4.1.327.1.1.6.6.1.3 |
adminScriptThe connection control string.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.6.1.4 |
adminRpaLogNumberThe number of remote PC access session log entries in this system.ro INTEGER .1.3.6.1.4.1.327.1.1.6.7 |
adminRpaLogTableRemote PC access session log table. SEQUENCE OF AdminRpaLogEntry .1.3.6.1.4.1.327.1.1.6.8 |
adminRpaLogEntryA list of logged remote PC access session information. AdminRpaLogEntry .1.3.6.1.4.1.327.1.1.6.8.1 |
adminRpaLogIndexA sequentally assigned index value for each entry. Index 32 always
points to the most-recently completed remote PC access session.ro INTEGER .1.3.6.1.4.1.327.1.1.6.8.1.1 |
adminRpaLogUserNameThe name of the logged-in user.ro DisplayString .1.3.6.1.4.1.327.1.1.6.8.1.2 |
adminRpaLogTimeThe start time (in HH:MM:SS) of this session.ro DisplayString .1.3.6.1.4.1.327.1.1.6.8.1.3 |
adminRpaLogDurationThe elapsed time (in HH:MM:SS) of this session.ro DisplayString .1.3.6.1.4.1.327.1.1.6.8.1.4 |
adminRpaLogAttemptsNumber of unsuccessful login attempts in this authentication
process.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.5 |
adminRpaLogInPacketsNumber of correctly received packets in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.6 |
adminRpaLogOutPacketsNumber of correctly transmitted packets in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.7 |
adminRpaLogInBytesNumber of correctly received bytes in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.8 |
adminRpaLogOutBytesNumber of correctly transmitted bytes in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.9 |
adminRpaLogParityErrorsNumber of characters received with parity error in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.10 |
adminRpaLogFrameErrorsNumber of characters received with framing error in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.11 |
adminRpaLogOverrunErrorsNumber of receive overrun errors in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.12 |
adminRpaLogCksumErrorsNumber of receive checksum errors in this session.ro Counter .1.3.6.1.4.1.327.1.1.6.8.1.13 |
adminRpaLogDateThe start date (in MM/DD/YY) of this session.ro DisplayString .1.3.6.1.4.1.327.1.1.6.8.1.14 |
adminRpaLogPortNameThe binding portname of this session.ro DisplayString .1.3.6.1.4.1.327.1.1.6.8.1.15 |
adminRpaLogPathNameThe binding pathname of this session.ro DisplayString .1.3.6.1.4.1.327.1.1.6.8.1.16 |
adminMisc OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.6.9 |
adminSysDescrSame as sysDescr in MIB II.ro DisplayString .1.3.6.1.4.1.327.1.1.6.9.1 |
adminNodeNameThe login ID that is transmitted by this node to a remote
router at connection establishing time. If the string is
not what the remote router expects, the connection will be
rejected.rw DisplayString .1.3.6.1.4.1.327.1.1.6.9.2 |
adminNodePasswordThe password that is transmitted by this node to a remote
router after login ID at connection establishing time.
If the string is not what the remote router expects, the
connection will be rejected.ro OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.3 |
adminDateCurrent date in mm/dd/yy format.rw DisplayString .1.3.6.1.4.1.327.1.1.6.9.4 |
adminTimeCurrent time in hh:mm:ss format.rw DisplayString .1.3.6.1.4.1.327.1.1.6.9.5 |
adminGreetingA user-defined text that is displayed when a user logs
into User Interface process.rw DisplayString .1.3.6.1.4.1.327.1.1.6.9.6 |
adminPromptAn user-defined prompt string for this node's
User Interface process. Note: This one is obsoleted after version
3.1 or laterrw DisplayString .1.3.6.1.4.1.327.1.1.6.9.7 |
adminSNMPGetFromThe value controls the type value returned to an SNMP GET
command. Setting this to '1' requests that the current
operational value of this variable is returned. Setting it
to '2' requests that the configured value (which will take
effect after a re-boot) is returned. The default is '1'.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.8 |
adminDoIntegrityA write to this variable (value don't care) cause an
integrity check on all the configuration parameters. The
result is given through a GET of this variable.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.9 |
adminDoFileloadA write to this variable (value don't care) cause a
fileload (upload or download depending on LoadFileName)
operation to start. The result is given through a
GET of this variable.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.10 |
adminLoadfileNameThe name of the file upon which the file-load operation
is to be operated.rw DisplayString .1.3.6.1.4.1.327.1.1.6.9.11 |
adminLastTrapThe last trap message contents.ro DisplayString .1.3.6.1.4.1.327.1.1.6.9.13 |
adminResetAllUserCountersWriting any value to this variable will reset all User-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.14 |
adminEraseConfigErase all configuration data in EEPROM.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.15 |
adminUIMsgLevelThis variable controls type of system messages to be displayed
on system console. Messages of priority equals or higher than the
specified level are displayed.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.16 |
adminSNMPMsgLevelThis variable controls type of system messages to be sent to SNMP
management stations. Messages of priority equals or higher than the
specified level are sent.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.17 |
adminLoginOptionThis variable enable the login sequence on async ports.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.18 |
adminRebootReboot the AccessBuilder server.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.19 |
adminMajorVersionAccessBuilder software Major version.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.20 |
adminMinorVersionAccessBuilder software Minor version.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.21 |
adminMIBVersionThis MIB version.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.22 |
adminTimeZoneTime difference between local time zone and Greenwich time
(in minutes).rw DisplayString .1.3.6.1.4.1.327.1.1.6.9.23 |
adminSecurityServerTypeEnables authentication through security helpers instead
of local user database.ro Enumeration .1.3.6.1.4.1.327.1.1.6.9.24 |
adminSecPasswordThe password is used to set up a session with security helpers.ro OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.25 |
adminScrtyClntIpAddrThe primary security helper's IP address.ro IpAddress .1.3.6.1.4.1.327.1.1.6.9.26 |
adminSecondScrtyClntIpAddrThe secondary security helper's IP address.ro IpAddress .1.3.6.1.4.1.327.1.1.6.9.27 |
adminUdpPortThis is the UDP port for the security helper protocol.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.28 |
adminTelnetAdminPortThis is the telnet administration port for dialout function.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.29 |
adminTelnetDialOutAuthEnables authentication for dialout function.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.30 |
adminDialOutEnabledEnables dialout function.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.31 |
adminEncryptNodePasswordThe encrypted node password is for configurator to change
node password by a authentication algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.32 |
adminEncryptSecurityServerTypeThe encrypted security server type is for configurator to
change security server type by a authentication algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.33 |
adminEncryptSecPasswordThe encrypted security password is for configurator to
change security password by a authentication algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.34 |
adminEncryptScrtyClntIpAddrThe encrypted helper IP address is for configurator to
change helper IP address by a authentication algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.35 |
adminEncryptSecondScrtyClntIpAddrThe encrypted secondary helper IP address is for configurator
to change secondary helper IP address by a authentication
algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.36 |
adminEncryptUdpPortThe encrypted helper UDP port is for configurator to
change helper UDP port by a authentication algorithm.rw OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.37 |
adminEPromSizeThis is the EProm size on the mother board.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.38 |
adminNVRamSizeThis is the Non-Volatile Ram (EEProm) size on the mother board.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.39 |
adminFlashRomSizeThis is the Flash Rom size on the mother board.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.40 |
adminLocalDRamSizeThis is the Local DRam size on the mother board.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.41 |
adminSharedDRamSizeThis is the Shared DRam size on the mother board.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.42 |
adminHWRevThis is the hardware revision on mother board.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.43 |
adminEncryptSuperUserPasswordThe encrypted superuser password is for configurator to get
the superuser password.ro OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.44 |
adminNewGreetingA user-defined text that is displayed when a user logs
into User Interface process.rw DisplayString .1.3.6.1.4.1.327.1.1.6.9.45 |
adminTFTPServerIpAddrThe TFTP server's IP address.rw IpAddress .1.3.6.1.4.1.327.1.1.6.9.46 |
adminSaveConfigA write to this variable (value don't care) cause a
save configuration operation to start. The result is
given through a GET of this variable.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.47 |
adminMaintenanceVersionAccessBuilder software Maintenance version.ro INTEGER .1.3.6.1.4.1.327.1.1.6.9.48 |
adminCheckConsoleModemCheck the status of console modem.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.49 |
adminConsoleImageDownloadDownload image by console port.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.50 |
adminConsoleConfigUploadUpload configuration by console port.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.51 |
adminConsoleConfigDownloadDownload configuration by console port.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.52 |
adminRasIdleTimeThe idle time to start spoofing for ras port.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.53 |
adminRouterIdleTimeThe idle time to start spoofing for router port.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.54 |
adminRasSpoofTimeThe time to spoof for ras port.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.55 |
adminRouterSpoofTimeThe time to spoof for router port.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.56 |
adminLnkUtilHighThldLink utilization high threshold.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.57 |
adminLnkUtilLowThldLink utilization low threshold.rw INTEGER .1.3.6.1.4.1.327.1.1.6.9.58 |
adminCallerIdCheckIndicate to check caller id or not.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.59 |
adminISDNRequiredBaudrateFor baudrate adaption of ISDN call.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.60 |
adminRouterCCPEnabledTurn on/off CCP for remotepath.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.61 |
adminSuggestFlagTurn on/off for ignoring some trivial error message.rw Enumeration .1.3.6.1.4.1.327.1.1.6.9.62 |
adminEEVersionNoThe EE version number, format is Major, Miror, Maintence and Patchro OCTET STRING .1.3.6.1.4.1.327.1.1.6.9.63 |
adminMdSetupNumberThe number of dialing Modem Setups on this system; this table
serves as a template to create 'real' modem script.ro INTEGER .1.3.6.1.4.1.327.1.1.6.10 |
adminMdSetupTableDialing Modem Setup table. SEQUENCE OF AdminMdSetupEntry .1.3.6.1.4.1.327.1.1.6.11 |
adminMdSetupEntryA list of dialing Modem Setup information. AdminMdSetupEntry .1.3.6.1.4.1.327.1.1.6.11.1 |
adminMdSetupIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.6.11.1.1 |
adminMdSetupTypeThe Modem Setup's type. A built-in Modem Setup's type can not be changed.
This type has to be set to user-defined before set the following entries.rw Enumeration .1.3.6.1.4.1.327.1.1.6.11.1.2 |
adminMdSetupNameThe name of the Modem Setup. Once congifured, this name can not be
changedrw DisplayString .1.3.6.1.4.1.327.1.1.6.11.1.3 |
adminMdSetupATCmdThe AT config command string.rw DisplayString .1.3.6.1.4.1.327.1.1.6.11.1.4 |
adminMdSetupARAP1-0ATCmdThe AT config command string for ARAP1.0.rw DisplayString .1.3.6.1.4.1.327.1.1.6.11.1.5 |
adminMdSetupIncomingCallThe In Coming call Indication: ri signal or 'ring' textrw Enumeration .1.3.6.1.4.1.327.1.1.6.11.1.6 |
adminMdSetupConnIndicationThe In Connect Indication: DCD signal or 'connect' textrw Enumeration .1.3.6.1.4.1.327.1.1.6.11.1.7 |
adminMdSetupCallTimeOutThe Call Time Out interval: 0 - 255 secrw INTEGER .1.3.6.1.4.1.327.1.1.6.11.1.8 |
adminMdSetupCallDelayThe Call Setup Delay interval: 0 - 120000 msecrw INTEGER .1.3.6.1.4.1.327.1.1.6.11.1.9 |
adminCallerIDNumberCaller Id Number.ro INTEGER .1.3.6.1.4.1.327.1.1.6.12 |
adminCallerIDTable SEQUENCE OF AdminCallerIDEntry .1.3.6.1.4.1.327.1.1.6.13 |
adminCallerIDEntry AdminCallerIDEntry .1.3.6.1.4.1.327.1.1.6.13.1 |
adminCallerIDIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.6.13.1.1 |
adminCallerIDNamerw DisplayString .1.3.6.1.4.1.327.1.1.6.13.1.2 |
adminCallerIDTyperw Enumeration .1.3.6.1.4.1.327.1.1.6.13.1.3 |
adminCallerIDCommentrw DisplayString .1.3.6.1.4.1.327.1.1.6.13.1.4 |
crat OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.7 |
atRpa OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.7.1 |
atRpaNumberThe number of AppleTalk (AT) remote PC paths on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.7.1.1 |
atRpaTableRemote PC access path table. SEQUENCE OF AtRpaEntry .1.3.6.1.4.1.327.1.1.7.1.2 |
atRpaEntryA path to a remote PC. AtRpaEntry .1.3.6.1.4.1.327.1.1.7.1.2.1 |
atRpaIndexThe RPA path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same RPA path as identified by the same value
of prpaIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.7.1.2.1.1 |
atRpaNetworkAddressThe current or last logged-in remote PC's AT address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.1.2.1.2 |
atRpaStateThe state of ARA connectionro INTEGER .1.3.6.1.4.1.327.1.1.7.1.2.1.3 |
atRpaDialInZoneThe name of specific zone for the remote Mac Users; Note:
reboot to take effectrw OCTET STRING .1.3.6.1.4.1.327.1.1.7.1.3 |
atRpaMaxConnTimeThe time interval of a seesion is allowed after login,
in minutes; 1 to 65,535; 0 = no limitrw INTEGER .1.3.6.1.4.1.327.1.1.7.1.4 |
atRpaNoNbpMulticastWhether to discard NBP multicast packetsrw Enumeration .1.3.6.1.4.1.327.1.1.7.1.5 |
atRt OBJECT IDENTIFIER .1.3.6.1.4.1.327.1.1.7.2 |
atPLocalNumberThe number of AT dynamic routes on this system.ro INTEGER .1.3.6.1.4.1.327.1.1.7.2.1 |
atPLocalTableAT dynamic route table. SEQUENCE OF AtPLocalEntry .1.3.6.1.4.1.327.1.1.7.2.2 |
atPLocalEntryA list of information for a AT dynamic route. AtPLocalEntry .1.3.6.1.4.1.327.1.1.7.2.2.1 |
atPLocalIndexThe route path on which the entry's equivalence is effective.
The path identified by a particular value of this index
is the same route path as identified by the same value
of plocalIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.7.2.2.1.1 |
atPLocalNetAddressThe current or last logged-in remote PC's AT address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.2.2.1.2 |
atPLocalNetStartThe current or last logged-in remote PC's AT address.ro INTEGER .1.3.6.1.4.1.327.1.1.7.2.2.1.3 |
atPLocalNetEndThe current or last logged-in remote PC's AT address.ro INTEGER .1.3.6.1.4.1.327.1.1.7.2.2.1.4 |
atPLocalDefaultRouterThe current or last logged-in remote PC's AT address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.2.2.1.5 |
atPLocalLocalZoneThe current or last logged-in remote PC's AT address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.2.2.1.6 |
atAarpTableThe AT Address Translation table used for mapping
from AT addresses to physical addresses. SEQUENCE OF AtAarpEntry .1.3.6.1.4.1.327.1.1.7.2.3 |
atAarpEntryEach entry contains one AT Address to `physical'
address equivalence. AtAarpEntry .1.3.6.1.4.1.327.1.1.7.2.3.1 |
atAarpIfIndexThe interface on which this entry's equivalence
is effective. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.7.2.3.1.1 |
atAarpPhysAddressThe media-dependent `physical' address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.2.3.1.2 |
atAarpNetAddressThe AtAddress corresponding to the media-
dependent `physical' address.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.2.3.1.3 |
atBestRouterCacheTableThe table for efficiently forwarding AT packets to
remote networks. SEQUENCE OF AtBestRouterCacheEntry .1.3.6.1.4.1.327.1.1.7.2.4 |
atBestRouterCacheEntryEach entry contains one AT Address and router physical
address. AtBestRouterCacheEntry .1.3.6.1.4.1.327.1.1.7.2.4.1 |
atBestRouterCacheIfIndexThe interface on which this entry's equivalence
is effective. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex.ro INTEGER .1.3.6.1.4.1.327.1.1.7.2.4.1.1 |
atBestRouterCachePhysAddressThe host address of the next router a packet should go
through to reach the specified AppleTalk.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.2.4.1.2 |
atBestRouterCacheNetAddressThe At Address for recently learned routers on the same
network segment as the AccessBuilder.ro OCTET STRING .1.3.6.1.4.1.327.1.1.7.2.4.1.3 |
atRtProtocolEnabledARAP protocol enable/disable flag.rw Enumeration .1.3.6.1.4.1.327.1.1.7.2.5 |
atRtInPacketsAT packets received with no error.ro Counter .1.3.6.1.4.1.327.1.1.7.2.6 |
atRtOutPacketsAT packets transmitted with no error.ro Counter .1.3.6.1.4.1.327.1.1.7.2.7 |
atRtResetAllCountersWriting any value to this variable will reset all port-related
counters to zero.rw INTEGER .1.3.6.1.4.1.327.1.1.7.2.8 |
atRtZoneFilterActionThis variable indicate the operation of zone filter.rw Enumeration .1.3.6.1.4.1.327.1.1.7.2.9 |
atZoneFilterTableZone Filter table. SEQUENCE OF AtZoneFilterEntry .1.3.6.1.4.1.327.1.1.7.2.10 |
atZoneFilterEntryA list of information for a zone filter. AtZoneFilterEntry .1.3.6.1.4.1.327.1.1.7.2.10.1 |
atZoneFilterIndexA sequentally assigned index value for each entry.ro INTEGER .1.3.6.1.4.1.327.1.1.7.2.10.1.1 |
atZoneFilterNameThe zone filter name.rw DisplayString .1.3.6.1.4.1.327.1.1.7.2.10.1.2 |
atZoneFilterTypeThis value controls whether the zone filter name is valid or invalid.
It will be set valid while adding and set invalid while deleting.rw Enumeration .1.3.6.1.4.1.327.1.1.7.2.10.1.3 |