CUMULUS-BGPVRF-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CUMULUS-BGPVRF-MIB.
Main OID:
bgp.1.3.6.1.4.1.40310.7
57
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
bgp MODULE-IDENTITY .1.3.6.1.4.1.40310.7 |
IMPORTS Unknown .1.3.6.1.4.1.40310.7 |
bgpVersionVector of supported BGP protocol version
numbers. Each peer negotiates the version
from this vector. Versions are identified
via the string of bits contained within this
object. The first octet contains bits 0 to
7, the second octet contains bits 8 to 15,
and so on, with the most significant bit
referring to the lowest bit number in the
octet (e.g., the MSB of the first octet
refers to bit 0). If a bit, i, is present
and set, then the version (i+1) of the BGP
is supported.ro OCTET STRING .1.3.6.1.4.1.40310.7.1 |
bgpLocalAsThe local autonomous system number.ro INTEGER .1.3.6.1.4.1.40310.7.2 |
bgpOuterTable OBJECT IDENTIFIER .1.3.6.1.4.1.40310.7.3 |
bgpPeerTableBGP peer table. This table contains,
one entry per BGP peer, information about
the connections with BGP peers. SEQUENCE OF BgpPeerEntry .1.3.6.1.4.1.40310.7.3.1 |
bgpPeerEntryEntry containing information about the
connection with a BGP peer. BgpPeerEntry .1.3.6.1.4.1.40310.7.3.1.1 |
bgpPeerIdentifierThe BGP Identifier of this entry's BGP
peer.ro IpAddress .1.3.6.1.4.1.40310.7.3.1.1.1 |
bgpPeerStateThe BGP peer connection state.ro Enumeration .1.3.6.1.4.1.40310.7.3.1.1.2 |
bgpPeerAdminStatusThe desired state of the BGP connection.
A stop state means the session is
administratively down, i.e. shutdown.ro Enumeration .1.3.6.1.4.1.40310.7.3.1.1.3 |
bgpPeerNegotiatedVersionThe negotiated version of BGP running
between the two peers.ro Integer32 .1.3.6.1.4.1.40310.7.3.1.1.4 |
bgpPeerLocalAddrThe local IP address of this entry's BGP
connection.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.40310.7.3.1.1.5 |
bgpPeerLocalPortThe local port for the TCP connection
between the BGP peers.ro INTEGER .1.3.6.1.4.1.40310.7.3.1.1.6 |
bgpPeerRemoteAddrThe remote IP address of this entry's BGP
peer.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.40310.7.3.1.1.7 |
bgpPeerRemotePortThe remote port for the TCP connection
between the BGP peers. Note that the
objects bgpPeerLocalAddr,
bgpPeerLocalPort, bgpPeerRemoteAddr and
bgpPeerRemotePort provide the appropriate
reference to the standard MIB TCP
connection table.ro INTEGER .1.3.6.1.4.1.40310.7.3.1.1.8 |
bgpPeerRemoteAsThe remote autonomous system number.ro INTEGER .1.3.6.1.4.1.40310.7.3.1.1.9 |
bgpPeerInUpdatesThe number of BGP UPDATE messages
received on this connection. This object
should be initialized to zero (0) when the
connection is established.ro Counter32 .1.3.6.1.4.1.40310.7.3.1.1.10 |
bgpPeerOutUpdatesThe number of BGP UPDATE messages
transmitted on this connection. This
object should be initialized to zero (0)
when the connection is established.ro Counter32 .1.3.6.1.4.1.40310.7.3.1.1.11 |
bgpPeerInTotalMessagesThe total number of messages received
from the remote peer on this connection.
This object should be initialized to zero
when the connection is established.ro Counter32 .1.3.6.1.4.1.40310.7.3.1.1.12 |
bgpPeerOutTotalMessagesThe total number of messages transmitted to
the remote peer on this connection. This
object should be initialized to zero when
the connection is established.ro Counter32 .1.3.6.1.4.1.40310.7.3.1.1.13 |
bgpPeerLastErrorThe last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
contains the error code, and the second byte
contains the subcode.ro OCTET STRING .1.3.6.1.4.1.40310.7.3.1.1.14 |
bgpPeerFsmEstablishedTransitionsThe total number of times the BGP FSM
transitioned into the established state.ro Counter32 .1.3.6.1.4.1.40310.7.3.1.1.15 |
bgpPeerFsmEstablishedTimeThis timer indicates how long (in
seconds) this peer has been in the
Established state or how long
since this peer was last in the
Established state. It is set to zero when
a new peer is configured or the router is
booted.ro Gauge32 .1.3.6.1.4.1.40310.7.3.1.1.16 |
bgpPeerConnectRetryIntervalTime interval in seconds for the
ConnectRetry timer. The suggested value
for this timer is 120 seconds.rw INTEGER .1.3.6.1.4.1.40310.7.3.1.1.17 |
bgpPeerHoldTimeTime interval in seconds for the Hold
Timer established with the peer. The
value of this object is calculated by this
BGP speaker by using the smaller of the
value in bgpPeerHoldTimeConfigured and the
Hold Time received in the OPEN message.
This value must be at lease three seconds
if it is not zero (0) in which case the
Hold Timer has not been established with
the peer, or, the value of
bgpPeerHoldTimeConfigured is zero (0).ro INTEGER ( 0 | 3..65535 ) .1.3.6.1.4.1.40310.7.3.1.1.18 |
bgpPeerKeepAliveTime interval in seconds for the KeepAlive
timer established with the peer. The value
of this object is calculated by this BGP
speaker such that, when compared with
bgpPeerHoldTime, it has the same
proportion as what
bgpPeerKeepAliveConfigured has when
compared with bgpPeerHoldTimeConfigured.
If the value of this object is zero (0),
it indicates that the KeepAlive timer has
not been established with the peer, or,
the value of bgpPeerKeepAliveConfigured is
zero (0).ro INTEGER ( 0 | 1..21845 ) .1.3.6.1.4.1.40310.7.3.1.1.19 |
bgpPeerHoldTimeConfiguredTime interval in seconds for the Hold Time
configured for this BGP speaker with this
peer. This value is placed in an OPEN
message sent to this peer by this BGP
speaker, and is compared with the Hold
Time field in an OPEN message received
from the peer when determining the Hold
Time (bgpPeerHoldTime) with the peer.
This value must not be less than three
seconds if it is not zero (0) in which
case the Hold Time is NOT to be
established with the peer. The suggested
value for this timer is 90 seconds.rw INTEGER ( 0 | 3..65535 ) .1.3.6.1.4.1.40310.7.3.1.1.20 |
bgpPeerKeepAliveConfiguredTime interval in seconds for the
KeepAlive timer configured for this BGP
speaker with this peer. The value of this
object will only determine the
KEEPALIVE messages' frequency relative to
the value specified in
bgpPeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages
is indicated by bgpPeerKeepAlive. A
reasonable maximum value for this timer
would be configured to be one
third of that of
bgpPeerHoldTimeConfigured.
If the value of this object is zero (0),
no periodical KEEPALIVE messages are sent
to the peer after the BGP connection has
been established. The suggested value for
this timer is 30 seconds.rw INTEGER ( 0 | 1..21845 ) .1.3.6.1.4.1.40310.7.3.1.1.21 |
bgpPeerMinRouteAdvertisementIntervalTime interval in seconds for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30
seconds.rw INTEGER .1.3.6.1.4.1.40310.7.3.1.1.23 |
bgpPeerInUpdateElapsedTimeElapsed time in seconds since the last BGP
UPDATE message was received from the peer.
Each time bgpPeerInUpdates is incremented,
the value of this object is set to zero
(0).ro Gauge32 .1.3.6.1.4.1.40310.7.3.1.1.24 |
bgpPeerIfaceFor BGP unnumbered neighbors routes are
using interfaces as nexthop interfaces.
This is the inteface from which nexthop
routero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.40310.7.3.1.1.25 |
bgpPeerDescThis is neighbour or peer description
field. It provides human readable info
about neighbour or peerro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.40310.7.3.1.1.26 |
bgpPeerIfindexKernel ifIndex for interface-based BGP
sessions. Value is 0 if not an
interface-based session.ro INTEGER .1.3.6.1.4.1.40310.7.3.1.1.27 |
bgpPeerIdTypeBGP session type carrying IPv4 Unicast
address-family.ro Enumeration .1.3.6.1.4.1.40310.7.3.1.1.28 |
bgpIdentifierThe BGP Identifier of local system.ro IpAddress .1.3.6.1.4.1.40310.7.4 |
bgp4PathAttrTableThe BGP-4 Received Path Attribute Table
contains information about paths to
destination networks received from all
BGP4 peers or locally originated. SEQUENCE OF Bgp4PathAttrEntry .1.3.6.1.4.1.40310.7.5 |
bgp4PathAttrEntryInformation about a path to a network. Bgp4PathAttrEntry .1.3.6.1.4.1.40310.7.5.1 |
bgp4PathAttrPeerThe IP address of the peer where the path
information was learned.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.40310.7.5.1.1 |
bgp4PathAttrIpAddrPrefixLenLength in bits of the IP address prefix
in the Network Layer Reachability
Information field.ro INTEGER .1.3.6.1.4.1.40310.7.5.1.2 |
bgp4PathAttrIpAddrPrefixAn IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
bgp4PathAttrIpAddrPrefixLen.
Any bits beyond the length specified by
bgp4PathAttrIpAddrPrefixLen are zeroed.ro IpAddress .1.3.6.1.4.1.40310.7.5.1.3 |
bgp4PathAttrOriginThe ultimate origin of the path
information.ro Enumeration .1.3.6.1.4.1.40310.7.5.1.4 |
bgp4PathAttrASPathSegmentThe sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs a
route in the UPDATE
message has traversed
2 AS_SEQUENCE: ordered set of ASs
a route in the UPDATE
message has traversed.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;ro OCTET STRING .1.3.6.1.4.1.40310.7.5.1.5 |
bgp4PathAttrNextHopThe address of the border router that
should be used for the destination
network.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.40310.7.5.1.6 |
bgp4PathAttrMultiExitDiscThis metric is used to discriminate
between multiple exit points to an
adjacent autonomous system. A value of -1
indicates the absence of this attribute.ro INTEGER (-1..2147483647) .1.3.6.1.4.1.40310.7.5.1.7 |
bgp4PathAttrLocalPrefThe originating BGP4 speaker's degree of
preference for an advertised route. A
value of -1 indicates the absence of this
attribute.ro INTEGER (-1..2147483647) .1.3.6.1.4.1.40310.7.5.1.8 |
bgp4PathAttrAtomicAggregateWhether or not the local system has
selected a less specific route without
selecting a more specific route.ro Enumeration .1.3.6.1.4.1.40310.7.5.1.9 |
bgp4PathAttrAggregatorASThe AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.ro INTEGER .1.3.6.1.4.1.40310.7.5.1.10 |
bgp4PathAttrAggregatorAddrThe IP address of the last BGP4 speaker
that performed route aggregation. A value
of 0.0.0.0 indicates the absence of this
attribute.ro IpAddress .1.3.6.1.4.1.40310.7.5.1.11 |
bgp4PathAttrCalcLocalPrefThe degree of preference calculated by the
receiving BGP4 speaker for an advertised
route. A value of -1 indicates the
absence of this attribute.ro INTEGER (-1..2147483647) .1.3.6.1.4.1.40310.7.5.1.12 |
bgp4PathAttrBestAn indication of whether or not this route
was chosen as the best BGP4 route.ro Enumeration .1.3.6.1.4.1.40310.7.5.1.13 |
bgp4PathAttrUnknownOne or more path attributes not understood
by this BGP4 speaker. Size zero (0)
indicates the absence of such
attribute(s). Octets beyond the maximum
size, if any, are not recorded by this
object.ro OCTET STRING .1.3.6.1.4.1.40310.7.5.1.14 |
bgpVrfTableVRF tablero INTEGER .1.3.6.1.4.1.40310.7.6 |
bgpVrfIdVRF idro INTEGER .1.3.6.1.4.1.40310.7.7 |
bgpVrfNameVRF namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.40310.7.8 |
bgpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.40310.7.9 |
bgpEstablishedThe BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.4.1.40310.7.9.1 |
bgpBackwardTransitionThe BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state. NOTIFICATION-TYPE .1.3.6.1.4.1.40310.7.9.2 |