Home/Catalog/CUBO-MINI-MIB

CUBO-MINI-MIB

This is the MIB module for objects used to manage the Cubo Mini device.
Main OID:
cubo_mini.1.3.6.1.4.1.27894.11.241
147
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-CONF
SNMPv2-SMI
CUBO-MIB

Objects

147 total
Object Name
cubo_miniThis is the MIB module for objects used to manage the Cubo Mini device.
MODULE-IDENTITY
.1.3.6.1.4.1.27894.11.241
cubominiObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.1
cubominiGeneralGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.1.1
cubominiSystemDataTableTable with general information and configuration of the Chassis.
SEQUENCE OF CubominiSystemDataEntry
.1.3.6.1.4.1.27894.11.241.1.1.1
cubominiSystemDataEntryThe chassis identifiers are used as table indexes.
CubominiSystemDataEntry
.1.3.6.1.4.1.27894.11.241.1.1.1.1
cubominiSystemDataChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.1.1.1.1
cubominiSystemDataSerialNumberThe serial number of the device.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.1.1.1.2
cubominiSystemDataDeviceNameThe device name.rw
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.1.1.1.3
cubominiSystemDataSwVersionThe software version of the device.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.1.1.1.4
cubominiSystemDataFwVersionThe firmware version of the device.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.1.1.1.5
cubominiSystemDataHwVersionThe hardware version of the device.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.1.1.1.6
cubominiFanGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.1.3
cubominiFanTableTable with information status and configuration for the inserted fan cards.
SEQUENCE OF CubominiFanEntry
.1.3.6.1.4.1.27894.11.241.1.3.1
cubominiFanEntryThe chassis, slot, fanslotmini identifiers are used as table indexes.
CubominiFanEntry
.1.3.6.1.4.1.27894.11.241.1.3.1.1
cubominiFanChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.3.1.1.1
cubominiFanSlotIdThe slot number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.3.1.1.2
cubominiFanFanslotminiIdThe fanslotmini number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.3.1.1.3
cubominiFanStatusIndicates the status of the fan card: 2: Fail. There is a failure in some fan 3: OK. Every fan is working correctly.ro
Enumeration
.1.3.6.1.4.1.27894.11.241.1.3.1.1.4
cubominiFanSpeedMeasured fan speed. Expressed in r.p.m..ro
Integer32 UNITS "r.p.m."
.1.3.6.1.4.1.27894.11.241.1.3.1.1.5
cubominiManagementGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.1.4
cubominiSnmpManagersTableTable with information about the SNMP trap managers.
SEQUENCE OF CubominiSnmpManagersEntry
.1.3.6.1.4.1.27894.11.241.1.4.1
cubominiSnmpManagersEntryThe chassis, snmpIndex identifiers are used as table indexes.
CubominiSnmpManagersEntry
.1.3.6.1.4.1.27894.11.241.1.4.1.1
cubominiSnmpManagersChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.4.1.1.1
cubominiSnmpManagersSnmpindexIdThe snmpIndex number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.4.1.1.2
cubominiSnmpManagersIpIP address of the SNMP manager.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.4.1.1.3
cubominiEmsManagersTableTable with information about the EMS trap managers.
SEQUENCE OF CubominiEmsManagersEntry
.1.3.6.1.4.1.27894.11.241.1.4.2
cubominiEmsManagersEntryThe chassis, emsIndex identifiers are used as table indexes.
CubominiEmsManagersEntry
.1.3.6.1.4.1.27894.11.241.1.4.2.1
cubominiEmsManagersChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.4.2.1.1
cubominiEmsManagersEmsindexIdThe emsIndex number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.4.2.1.2
cubominiEmsManagersIpIP address of the EMS manager.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.4.2.1.3
cubominiNetworkIfGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.1.5
cubominiNetworkIfTableTable with the configuration IP addresses for the network connections.
SEQUENCE OF CubominiNetworkIfEntry
.1.3.6.1.4.1.27894.11.241.1.5.1
cubominiNetworkIfEntryThe chassis, netIndex identifiers are used as table indexes.
CubominiNetworkIfEntry
.1.3.6.1.4.1.27894.11.241.1.5.1.1
cubominiNetworkIfChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.1.1.1
cubominiNetworkIfNetindexIdThe netIndex number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.1.1.2
cubominiNetworkIfIPAddressIP address for this connnection.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.1.1.3
cubominiNetworkIfNetMaskSubnet mask for this connnection.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.1.1.4
cubominiNetworkIfGatewayIP address of the network gateway for this connnection.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.1.1.5
cubominiOptGeneralTableTable with configuration and status information about the transceivers at the card.
SEQUENCE OF CubominiOptGeneralEntry
.1.3.6.1.4.1.27894.11.241.1.5.2
cubominiOptGeneralEntryThe chassis, monIndex, port identifiers are used as table indexes.
CubominiOptGeneralEntry
.1.3.6.1.4.1.27894.11.241.1.5.2.1
cubominiOptGeneralChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.2.1.1
cubominiOptGeneralMonindexIdThe monIndex number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.2.1.2
cubominiOptGeneralPortIdThe port number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.2.1.3
cubominiOptGeneralIsInsertedIndicates if there is a transceiver inserted in the given port.ro
Enumeration
.1.3.6.1.4.1.27894.11.241.1.5.2.1.4
cubominiOptGeneralEventsStatusIt indicates the status of the Transceiver alarm flags. Each byte corresponds to an alarm, where: 0x00:Alarm OFF, 0x01:Alarm ON, 0x02:Alarm Inhibited/Not Applicable Byte 0: Transceiver Loss Of Signal (ID: 289) Byte 1: Transceiver Tx Failure (ID: 290) Byte 2: Transceiver Laser Off (ID: 291) Byte 3: Transceiver Low Rx Power Alarm (ID: 296) Byte 4: Transceiver High Rx Power Alarm (ID: 297) Byte 5: Transceiver Low Tx Power Alarm (ID: 298) Byte 6: Transceiver High Tx Power Alarm (ID: 299) Byte 7: Transceiver Low Temperature Alarm (ID: 301) Byte 8: Transceiver High Temperature Alarm (ID: 302) Byte 9: Port Regulator Failure (ID: 259) .ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.2.1.5
cubominiOptGeneralTxForceForce the state of the laser trasmitter: Off: The laser trasmitter is disabled On: The laser trasmitter is enabled .rw
Enumeration
.1.3.6.1.4.1.27894.11.241.1.5.2.1.6
cubominiOptIdentTableTable with the static identifiers of the the inserted transceivers.
SEQUENCE OF CubominiOptIdentEntry
.1.3.6.1.4.1.27894.11.241.1.5.3
cubominiOptIdentEntryThe chassis, monIndex, port identifiers are used as table indexes.
CubominiOptIdentEntry
.1.3.6.1.4.1.27894.11.241.1.5.3.1
cubominiOptIdentChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.3.1.1
cubominiOptIdentMonindexIdThe monIndex number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.3.1.2
cubominiOptIdentPortIdThe port number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.3.1.3
cubominiOptIdentVendorNameTransceiver vendor name.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.3.1.4
cubominiOptIdentVendorPartNumberPart number provided by the transceiver vendor.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.3.1.5
cubominiOptIdentVendorSerialNumberSerial number provided by the transceiver vendor.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.3.1.6
cubominiOptIdentNominalWavelengthTransceiver nominal wavelength. Zero for a copper adapter. Expressed in hundredths (1/100) of a nanometer.ro
Integer32 UNITS "Hundredths (1/100) of a nanometer"
.1.3.6.1.4.1.27894.11.241.1.5.3.1.7
cubominiDnsServerTableTable with the IP addresses of the DNS servers used.
SEQUENCE OF CubominiDnsServerEntry
.1.3.6.1.4.1.27894.11.241.1.5.4
cubominiDnsServerEntryThe chassis, dnsIndex identifiers are used as table indexes.
CubominiDnsServerEntry
.1.3.6.1.4.1.27894.11.241.1.5.4.1
cubominiDnsServerChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.4.1.1
cubominiDnsServerDnsindexIdThe dnsIndex number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.4.1.2
cubominiDnsServerIpAddressIP address of the DNS server.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.4.1.3
cubominiNtpServerGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.1.5.5
cubominiNtpServerParamsTableTable with parameters for the use of the NTP service.
SEQUENCE OF CubominiNtpServerParamsEntry
.1.3.6.1.4.1.27894.11.241.1.5.5.1
cubominiNtpServerParamsEntryThe chassis identifiers are used as table indexes.
CubominiNtpServerParamsEntry
.1.3.6.1.4.1.27894.11.241.1.5.5.1.1
cubominiNtpServerParamsChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.5.1.1.1
cubominiNtpServerParamsActiveIndicates if the NTP server is used: 2: Not active. The date and time is not synchronized from the NTP server (manual mode) 3: Active. The date and time is synchronized from the NTP server.ro
Enumeration
.1.3.6.1.4.1.27894.11.241.1.5.5.1.1.2
cubominiNtpServerTableTable with the IP addresses of the NTP servers used.
SEQUENCE OF CubominiNtpServerEntry
.1.3.6.1.4.1.27894.11.241.1.5.5.2
cubominiNtpServerEntryThe chassis, ntpIndex identifiers are used as table indexes.
CubominiNtpServerEntry
.1.3.6.1.4.1.27894.11.241.1.5.5.2.1
cubominiNtpServerChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.5.2.1.1
cubominiNtpServerNtpindexIdThe ntpIndex number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.5.5.2.1.2
cubominiNtpServerIPAddressIP address of the NTP server.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.5.5.2.1.3
cubominiXcvrGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.1.9
cubominiXcvrCommonConfigTableTable with the diagnostic monitoring elements.
SEQUENCE OF CubominiXcvrCommonConfigEntry
.1.3.6.1.4.1.27894.11.241.1.9.1
cubominiXcvrCommonConfigEntryThe chassis, slot identifiers are used as table indexes.
CubominiXcvrCommonConfigEntry
.1.3.6.1.4.1.27894.11.241.1.9.1.1
cubominiXcvrCommonConfigChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.1.1.1
cubominiXcvrCommonConfigSlotIdThe slot number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.1.1.2
cubominiXcvrCommonConfigLoopbackOperationForce the loopback state of both QSFP ports: Off: The loopback is disabled On: The loopback is enabled .rw
Enumeration
.1.3.6.1.4.1.27894.11.241.1.9.1.1.3
cubominiXcvrCommonConfigLoopbackTimeoutEnable the loopback for a given period of time. Expressed in seconds.rw
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.1.1.4
cubominiXcvrCommonConfigDataRateSetSelect the data rate of the QSFP ports: dr40gbps: The data rate is set to 40 Gbps dr100gbps: The data rate is set to 100 Gbps drotu4: The data rate is set to the OTU-4 standard (112 Gbps) .rw
Enumeration
.1.3.6.1.4.1.27894.11.241.1.9.1.1.5
cubominiXcvrCommonConfigLinkLossFwdSelect the link loss forward mode for the QSFP ports: llfOff: The link loss forward is not active llfLn2Cl: A loss of signal at the line RX switches off the client TX llfCl2Ln: A loss of signal at the client RX switches off the line TX llfBidir: Both directions, line RX to client TX and client RX to line TX, are active .rw
Enumeration
.1.3.6.1.4.1.27894.11.241.1.9.1.1.6
cubominiXcvrGeneralTableTable with configuration and status information about the transceivers at the card.
SEQUENCE OF CubominiXcvrGeneralEntry
.1.3.6.1.4.1.27894.11.241.1.9.2
cubominiXcvrGeneralEntryThe chassis, slot, port identifiers are used as table indexes.
CubominiXcvrGeneralEntry
.1.3.6.1.4.1.27894.11.241.1.9.2.1
cubominiXcvrGeneralChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.2.1.1
cubominiXcvrGeneralSlotIdThe slot number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.2.1.2
cubominiXcvrGeneralPortIdThe port number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.2.1.3
cubominiXcvrGeneralIsInsertedIndicates if there is a transceiver inserted in the given port.ro
Enumeration
.1.3.6.1.4.1.27894.11.241.1.9.2.1.4
cubominiXcvrGeneralEventsStatusAllIt indicates the status of the Transceiver alarm flags. Each byte corresponds to an alarm, where: 0x00:Alarm OFF, 0x01:Alarm ON, 0x02:Alarm Inhibited/Not Applicable Byte 0: Transceiver Loss Of Signal (ID: 289) Byte 1: Transceiver Tx Failure (ID: 290) Byte 2: Transceiver Laser Off (ID: 291) Byte 3: Transceiver Low Rx Power Alarm (ID: 296) Byte 4: Transceiver High Rx Power Alarm (ID: 297) Byte 5: Transceiver Low Tx Power Alarm (ID: 298) Byte 6: Transceiver High Tx Power Alarm (ID: 299) Byte 7: Transceiver Low Temperature Alarm (ID: 301) Byte 8: Transceiver High Temperature Alarm (ID: 302) Byte 9: Port Regulator Failure (ID: 259) .ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.9.2.1.5
cubominiXcvrGeneralCDRPortEventsStatusAllIt indicates the status of the CDR alarm flags. Each byte corresponds to an alarm, where: 0x00:Alarm OFF, 0x01:Alarm ON, 0x02:Alarm Inhibited/Not Applicable Byte 0: Cdr Rx Loss Of Lock (ID: 292) Byte 1: Cdr Tx Loss Of Lock (ID: 293) .ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.9.2.1.6
cubominiXcvrGeneralTxForceModeForce the state of the laser trasmitter: Off: The laser trasmitter is disabled On: The laser trasmitter is enabled .rw
Enumeration
.1.3.6.1.4.1.27894.11.241.1.9.2.1.7
cubominiXcvrIdentTableTable with the static identifiers of the the inserted transceivers.
SEQUENCE OF CubominiXcvrIdentEntry
.1.3.6.1.4.1.27894.11.241.1.9.3
cubominiXcvrIdentEntryThe chassis, slot, port identifiers are used as table indexes.
CubominiXcvrIdentEntry
.1.3.6.1.4.1.27894.11.241.1.9.3.1
cubominiXcvrIdentChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.3.1.1
cubominiXcvrIdentSlotIdThe slot number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.3.1.2
cubominiXcvrIdentPortIdThe port number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.3.1.3
cubominiXcvrIdentVendorNameTransceiver vendor name.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.9.3.1.4
cubominiXcvrIdentVendorPartNumberPart number provided by the transceiver vendor.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.9.3.1.5
cubominiXcvrIdentVendorSerialNumberSerial number provided by the transceiver vendor.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.1.9.3.1.6
cubominiXcvrIdentNominalWavelengthTransceiver nominal wavelength. Zero for a copper adapter. Expressed in hundredths (1/100) of a nanometer.ro
Integer32 UNITS "Hundredths (1/100) of a nanometer"
.1.3.6.1.4.1.27894.11.241.1.9.3.1.7
cubominiXcvrEvThresholdTableTable with the event power thresholds.
SEQUENCE OF CubominiXcvrEvThresholdEntry
.1.3.6.1.4.1.27894.11.241.1.9.4
cubominiXcvrEvThresholdEntryThe chassis, slot, port identifiers are used as table indexes.
CubominiXcvrEvThresholdEntry
.1.3.6.1.4.1.27894.11.241.1.9.4.1
cubominiXcvrEvThresholdChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.4.1.1
cubominiXcvrEvThresholdSlotIdThe slot number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.4.1.2
cubominiXcvrEvThresholdPortIdThe port number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.4.1.3
cubominiXcvrEvThresholdMinInputPowerThreshold for the event 'Low RX power'. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.4.1.4
cubominiXcvrEvThresholdMaxInputPowerThreshold for the event 'High RX power'. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.4.1.5
cubominiXcvrEvThresholdMinOutputPowerThreshold for the event 'Low TX power'. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.4.1.6
cubominiXcvrEvThresholdMaxOutputPowerThreshold for the event 'High TX power'. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.4.1.7
cubominiXcvrDiagnosticsTableTable with the diagnostic monitoring elements.
SEQUENCE OF CubominiXcvrDiagnosticsEntry
.1.3.6.1.4.1.27894.11.241.1.9.5
cubominiXcvrDiagnosticsEntryThe chassis, slot, port identifiers are used as table indexes.
CubominiXcvrDiagnosticsEntry
.1.3.6.1.4.1.27894.11.241.1.9.5.1
cubominiXcvrDiagnosticsChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.5.1.1
cubominiXcvrDiagnosticsSlotIdThe slot number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.5.1.2
cubominiXcvrDiagnosticsPortIdThe port number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.5.1.3
cubominiXcvrDiagnosticsTemperatureCalilbrated transceiver temperature. Expressed in tenths (1/10) of Celsius degrees.ro
Integer32(-1280..1279) UNITS "Tenths (1/10) of Celsius degrees"
.1.3.6.1.4.1.27894.11.241.1.9.5.1.4
cubominiXcvrDiagnosticsTxPowerAllCalilbrated transmitted optical power by the transceiver. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.5.1.5
cubominiXcvrDiagnosticsRxPowerAllCalilbrated received optical power by the transceiver. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.5.1.6
cubominiXcvrOptChannelsTableTable with the optical powers of the QSFP individual channels.
SEQUENCE OF CubominiXcvrOptChannelsEntry
.1.3.6.1.4.1.27894.11.241.1.9.6
cubominiXcvrOptChannelsEntryThe chassis, slot, port, channel identifiers are used as table indexes.
CubominiXcvrOptChannelsEntry
.1.3.6.1.4.1.27894.11.241.1.9.6.1
cubominiXcvrOptChannelsChassisIdThe chassis number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.6.1.1
cubominiXcvrOptChannelsSlotIdThe slot number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.6.1.2
cubominiXcvrOptChannelsPortIdThe port number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.6.1.3
cubominiXcvrOptChannelsChannelIdThe channel number.
Integer32
.1.3.6.1.4.1.27894.11.241.1.9.6.1.4
cubominiXcvrOptChannelsTxPowerCalilbrated transmitted optical power of the single QSFP channel. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.6.1.5
cubominiXcvrOptChannelsRxPowerCalilbrated received optical power of the single QSFP channel. Expressed in tenths (1/10) of dBm.ro
Integer32(-400..82) UNITS "Tenths (1/10) of dBm"
.1.3.6.1.4.1.27894.11.241.1.9.6.1.6
cubominiTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.2
cubominiNotificationA notification from the card.
NOTIFICATION-TYPE
.1.3.6.1.4.1.27894.11.241.2.2
cubominiCardIdThe unique identifier of the card sending the notification.ro
Enumeration
.1.3.6.1.4.1.27894.11.241.2.3
cubominiChassisThe identifier of the chassis sending the notification.ro
Integer32
.1.3.6.1.4.1.27894.11.241.2.4
cubominiSlotThe identifier of the slot sending the notification. If a slot is not relevant to the notification, the slot number is 255.ro
Integer32
.1.3.6.1.4.1.27894.11.241.2.5
cubominiPortThe identifier of the port sending the notification. If a port is not relevant to the notification, the port number is 255.ro
Integer32
.1.3.6.1.4.1.27894.11.241.2.6
cubominiNotificationIdThe identifier of the event/alarm.ro
Enumeration
.1.3.6.1.4.1.27894.11.241.2.7
cubominiShortDescriptionInformation about the notification. Short Description.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.2.8
cubominiLongDescriptionInformation about the notification. Long Description.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.2.9
cubominiSeverityInformation about the notification. Severity level.ro
Enumeration
.1.3.6.1.4.1.27894.11.241.2.10
cubominiDataNotification raw data. It depends on the notification ID (see the cubominiNotificationId column):ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.2.11
cubominiLabelLabel of the element sending the notification.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.2.12
cubominiEventTimeTime at which the event took place expressed in RFC 3339 format.ro
OCTET STRING
.1.3.6.1.4.1.27894.11.241.2.13
cubominiConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.3
cubominiCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.3.1
cubominiComplianceThe compliance statement for the SNMPv2 entities that implement the CUBO-MINI-MIB.
Unknown
.1.3.6.1.4.1.27894.11.241.3.1.1
cubominiGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.27894.11.241.3.2
cubo_miniGeneralGroupA collection of objects providing general information about the device
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.1
cubo_miniFanGroupA collection of objects providing configuration and status information about the fans
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.2
cubo_miniManagementGroupA collection of objects providing information about the IP addresses to send the traps
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.3
cubo_miniNetworkIfGroupA collection of objects providing configuration for the Ethernet network interface
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.4
cubo_miniNtpServerGroupA collection of objects providing configuration for the NTP service
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.5
cubo_miniXcvrGroupA collection of objects providing configuration and status information about the QSFP transceivers
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.6
cubo_miniNotificationObjectsGroupA collection of objects related to or included in CUBO-MINI notifications.
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.7
cubo_miniNotificationGroupNotifications generated by an CUBO-MINI card. By default all the notifications are enabled.
Unknown
.1.3.6.1.4.1.27894.11.241.3.2.8