CRI-SERVER-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CRI-SERVER-MIB.
268
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
268 total| Object Name |
|---|
sun OBJECT IDENTIFIER .1.3.6.1.4.1.34 |
RFC1155-SMI Unknown .1.3.6.1.4.1.34 |
domainChangeThis trap indicates the domain table has
changed. The first two variables (platformName
and confNumDomain) will always have an instance
value of 0. The remaining variables
(domainName, domainNumSysBrd, domainSysBrdList,
domainOSVersion, platformType, platformName )
will have an instance value of 0 to
confNumDomain - 1. An instance of these
remaining variables describe a domain.
All variables for this trap are mandatory. TRAP-TYPE .1.3.6.1.4.1.34.0.0 |
eddControlThis trap indicates the action EDD should
be taken. All variables for this trap are
mandatory. TRAP-TYPE .1.3.6.1.4.1.34.0.1 |
eddStateThis trap indicates the new state of the
EDD. All variables for this trap are
mandatory. TRAP-TYPE .1.3.6.1.4.1.34.0.2 |
sysBrdTempNormThis trap indicates a System Board transition
from over temperature reading to normal. The
platform name and board number will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.3 |
sysBrdTempHighThis trap indicates a System Board high
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.4 |
sysBrdTempWarnThis trap indicates a System Board warning
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.5 |
sysBrdTempMaxThis trap indicates a System Board max
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.6 |
sysBrdTemp911This trap indicates a System Board 911
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.7 |
sysBrdTempBadThis trap indicates a System Board bad
temperature reading. This means that at least
half the temperature sensors on the board
report invalid temperature readings. For
ASIC temperature errors, it is possible that
the ASICs are not thermally calibrated. The
platform name and board number variables
will always be provided with this trap.
Whereas, only those temperature readings
that crossed the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.8 |
sysBrdTempChangeThis trap indicates that a System Board
temperature reading has changed within a
specified delta. The platform name
and board number variables will always be
provided with this trap. Whereas, only
those temperature readings that changed
will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.9 |
cbTempNormThis trap indicates a Control Board
transition to normal temperature reading.
The platform name and board number variables
will always be provided with this trap.
Whereas, only those temperature readings
that crossed the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.10 |
cbTempHighThis trap indicates a Control Board high
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.11 |
cbTempWarnThis trap indicates a Control Board warning
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.12 |
cbTempMaxThis trap indicates a Control Board max
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.13 |
cbTemp911This trap indicates a Control Board 911
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.14 |
cbTempBadThis trap indicates a Control Board bad
temperature reading. This means that at least
half the temperature sensors on the board
report invalid temperature readings. For
ASIC temperature errors, it is possible that
the ASICs are not thermally calibrated. The
platform name and board number variables will
always be provided with this trap. Whereas,
only those temperature readings that crossed
the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.15 |
cbTempChangeThis trap indicates that a Control Board
temperature reading has changed within a
specified delta. The platform name and board
number variables will always be provided
with this trap. Whereas, only those
temperature readings that crossed
the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.16 |
centerplaneTempNormThis trap indicates a Centerplane
transition to normal temperature reading.
The platform name and board number variables
will always be provided with this trap.
Whereas, only those temperature readings
that crossed the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.17 |
centerplaneTempHighThis trap indicates a Centerplane high
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.18 |
centerplaneTempWarnThis trap indicates a Centerplane
warning temperature reading. The platform name
and board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.19 |
centerplaneTempMaxThis trap indicates a Centerplane max
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.20 |
centerplaneTemp911This trap indicates a Centerplane 911
temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.21 |
centerplaneTempBadThis trap indicates a Centerplane bad
temperature reading. This means that at least
half the temperature sensors on the board
report invalid temperature readings. For
ASIC temperature errors, it is possible that
the ASICs are not thermally calibrated. The
platform name and board number variables will
always be provided with this trap. Whereas,
only those temperature readings that crossed
the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.22 |
centerplaneTempChangeThis trap indicates that a Centerplane
temperature reading has changed within a
specified delta. The platform name and
board number variables will always be
provided with this trap. Whereas,
only those temperature readings that crossed
the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.23 |
cbeConnectedThis trap indicates that the control board
server (cbs) is connected to the control
board executive (cbe) and is ready for
control board operation. All variables are
mandatory for this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.24 |
cbeDisconnectedThis trap indicates that the control board
server (cbs) has lost connection with the
control board executive (cbe). All variables
are mandatory for this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.25 |
suppBrdTempNormThis trap indicates a Centerplane Support Board
transition from over temperature reading to
normal. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.26 |
suppBrdTempHighThis trap indicates a Centerplane Support Board
high temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.27 |
suppBrdTempWarnThis trap indicates a Centerplane Support Board
warning temperature reading. The platform name
and board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.28 |
suppBrdTempMaxThis trap indicates a Centerplane Support Board
max temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.29 |
suppBrdTemp911This trap indicates a Centerplane Support Board
911 temperature reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.30 |
suppBrdTempBadThis trap indicates a Centerplane Support Board
bad temperature reading. This means that half
the temperature sensors on the board do not
report valid temperature readings. For
ASIC temperature errors, it is possible that
the ASICs are not thermally calibrated.
The platform name and board number variables
will always be provided with this trap.
Whereas, only those temperature readings
that crossed the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.31 |
suppBrdTempChangeThis trap indicates that a Centerplane
Support Board temperature reading has changed
within a specified delta. The platform
name and board number variables will always be
provided with this trap. Whereas, only those
temperature readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.32 |
sysBrdVoltNormThis trap indicates a System Board transition
from low or high power reading to normal. The
platform name and board number variables will
always be provided with this trap. Whereas,
only those voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.33 |
sysBrdVoltMaxThis trap indicates a System Board max
voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.34 |
sysBrdVoltMinThis trap indicates a System Board min
voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.35 |
sysBrdVoltBadThis trap indicates a System Board bad
voltage reading. This means that at least
half the voltage sensors on the board
report invalid voltage readings. The platform
name and board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.36 |
sysBrdVoltChangeThis trap indicates a System Board
voltage reading has changed within a
specified delta. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.37 |
cbVoltNormThis trap indicates a Control Board
transition to normal voltage reading. The
platform name and board number variables
will always be provided with this trap.
Whereas, only those voltage readings that
crossed the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.38 |
cbVoltMaxThis trap indicates a Control Board max
voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.39 |
cbVoltMinThis trap indicates a Control Board min
voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.40 |
cbVoltBadThis trap indicates a Control Board bad
voltage reading. This means that at least
half the voltage sensors on the board
report invalid voltage readings. The platform
name and board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.41 |
cbVoltChangeThis trap indicates a Control Board
voltage reading has changed within a
specified delta. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.42 |
centerplaneVoltNormThis trap indicates a Centerplane
transition to normal voltage reading. The
platform name and board number variables
will always be provided with this trap.'
Whereas, only those voltage readings that
crossed the threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.43 |
centerplaneVoltMaxThis trap indicates a Centerplane max
voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.44 |
centerplaneVoltMinThis trap indicates a Centerplane Min
voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.45 |
centerplaneVoltBadThis trap indicates a Centerplane bad
voltage reading. This means that at least
half the voltage sensors on the board
report invalid voltage readings. The platform
name and board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.46 |
centerplaneVoltChangeThis trap indicates a Centerplane
voltage reading has changed within a
specified delta. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.47 |
suppBrdVoltNormThis trap indicates a Centerplane Support Board
transition from over voltage reading to
normal. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.48 |
suppBrdVoltMaxThis trap indicates a Centerplane Support Board
max voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.49 |
suppBrdVoltMinThis trap indicates a Centerplane Support Board
Min voltage reading. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.50 |
suppBrdVoltBadThis trap indicates a Centerplane Support Board
bad voltage reading. This means that half
the voltage sensors on the board do not
report valid voltage readings. The platform
name and board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.51 |
suppBrdVoltChangeThis trap indicates a Centerplane Support
Board voltage reading has changed within a
specified delta. The platform name and
board number variables will always be
provided with this trap. Whereas, only those
voltage readings that crossed the
threshold will be included. TRAP-TYPE .1.3.6.1.4.1.34.0.52 |
fanNormThis trap indicates a fan transition
from failed to normal. All variables are
mandatory for this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.53 |
fanFailThis trap indicates a fan failure. All
variables are mandatory for this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.54 |
systemConfigurationChangeThis trap indicates that the system
configuration has changed. It indicates
what boards have been inserted or removed. The
platform name will always be provided but
only those lists that change will be included.
Only when the system board list changes will
the proc list be provided. TRAP-TYPE .1.3.6.1.4.1.34.0.55 |
arbitrationStopThis trap indicates that a particular
domain has experienced an arbstop. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.56 |
recordStopThis trap indicates that a particular
domain has experienced a recordarbstop. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.57 |
watchdogThis trap indicates that a particular
domain has experienced a watchdog. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.58 |
environmentalShutdownThis trap indicates that a particular
domain has experienced an environmental
shutdown. All variables will be provided
with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.59 |
rebootThis trap indicates that a particular
domain has experienced a reboot. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.60 |
panic1This trap indicates that a particular
domain has experienced a panic1. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.61 |
panic2This trap indicates that a particular
domain has experienced a panic2. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.62 |
panicRebootThis trap indicates that a particular
domain has experienced a panic_reboot. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.63 |
heartbeatFailureThis trap indicates that a particular
domain has experienced a heartbeat_failure.
All variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.64 |
signatureBlockChangeThis trap indicates that the
signature block has changed. All
variables will be provided with this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.65 |
sysbrdPowerOffThis trap indicates that a system
board has been powered off. The platform name
will always be provided whereas one or more
board number identifiers will be provided. TRAP-TYPE .1.3.6.1.4.1.34.0.66 |
sysbrdPowerOnThis trap indicates that a system
board has been powered on. The platform name
will always be provided whereas one or more
board number identifiers will be provided. TRAP-TYPE .1.3.6.1.4.1.34.0.67 |
suppbrdPowerOffThis trap indicates that a support
board has been powered off. The platform name
will always be provided whereas one or more
board number identifiers will be provided. TRAP-TYPE .1.3.6.1.4.1.34.0.68 |
suppbrdPowerOnThis trap indicates that a support
board has been powered on. The platform name
will always be provided whereas one or more
board number identifiers will be provided. TRAP-TYPE .1.3.6.1.4.1.34.0.69 |
bulkPowerNormThis trap indicates that a particular
Bulk Power has returned to (or is in)
normal mode. All variables are mandatory for
this trap. TRAP-TYPE .1.3.6.1.4.1.34.0.70 |
bulkPowerFailThis trap indicates Bulk Power failure. All
variables are mandatory for this event. TRAP-TYPE .1.3.6.1.4.1.34.0.71 |
bootProcChangeThis trap indicates a change in the
Boot Proc. All variables are mandatory
for this event. TRAP-TYPE .1.3.6.1.4.1.34.0.72 |
sigObpBootingThis trap indicates that a proc in a particular
domain has experienced a signature change
indicating the domain is booting. The signature
block specifies signature OBP and state BOOTING.
All variables are mandatory
for this event. TRAP-TYPE .1.3.6.1.4.1.34.0.73 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.34.2 |
general OBJECT IDENTIFIER .1.3.6.1.4.1.34.2.1 |
platform OBJECT IDENTIFIER .1.3.6.1.4.1.34.2.1.1 |
platformTypeThe platform type. Currently, only one
platform is defined: Starfire. There is no
plan to backport to CS6400 yet.ro Enumeration .1.3.6.1.4.1.34.2.1.1.1 |
platformNameThe name assigned to a physical machine.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.1.2 |
platformAmbientTempThe current ambient temperature of the
platform. The temperature will be in Celsius.ro INTEGER .1.3.6.1.4.1.34.2.1.1.3 |
platformResetThis member resets the platform.rw Enumeration .1.3.6.1.4.1.34.2.1.1.4 |
platformInterconnectClockFreqThis member is the current interconnect
frequency of the platform. The unit is in Hz.ro INTEGER .1.3.6.1.4.1.34.2.1.1.5 |
platformProcClockFreqThis member is the current processor clock
frequency of the platform. The unit is in Hz.ro INTEGER .1.3.6.1.4.1.34.2.1.1.6 |
platformJtagClockFreqThis member is the current JTAG clock
frequency of the platform. The unit is in Hz.
Note: this member is only measurable in
the rev-3 control board. If this unit is
not available (rev-1 or rev-2 control board),
the returning value is set to 0 Hz.ro INTEGER .1.3.6.1.4.1.34.2.1.1.7 |
platformTargetInterconnectClockFreqThis member is the targeted interconnect clock
frequency. The unit is in Hz and the valid
range is between 40,000,000 Hz and
120,000,000 Hz.
The platformTargetInterconnectClockFreq,
platformTargetProcClockMultiple and
platformTargetJtagClockFreq must be
established prior to system operation.
They are used as the guideline to
set up the interconnect, processor and JTAG
clock frequency of the platform.
These value are maintained in SSP persistent
store.rw INTEGER .1.3.6.1.4.1.34.2.1.1.8 |
platformTargetProcClockMultipleThis member is the targeted processor clock
frequency expressed in terms of a specific
factor of the system clock. Possible options
are factor of 2 or 3. See
platformTargetInterconnectClockFreq for more
detail.
A possible Blackbird processor would use the
3:2 ratio.rw Enumeration .1.3.6.1.4.1.34.2.1.1.9 |
platformTargetJtagClockFreqThis member is the targeted JTAG clock
frequency. The unit is in Hz.
See platformTargetSystemClockFreq for more
detail.ro INTEGER .1.3.6.1.4.1.34.2.1.1.10 |
platformMasterConBrdThis member is the master control board
number.ro INTEGER .1.3.6.1.4.1.34.2.1.1.11 |
platformSysClkConBrdThis member is the control board providing
system clock to the platform.ro INTEGER .1.3.6.1.4.1.34.2.1.1.12 |
conf OBJECT IDENTIFIER .1.3.6.1.4.1.34.2.1.2 |
confNumDomainThe number of domain in the platform.
Domains are created with command, domain_create.
Domains are removed with command,
domain_remove.ro INTEGER .1.3.6.1.4.1.34.2.1.2.1 |
confNumSysBrdThe number of system board in the platform.
The max # system board in a Starfire system is
16.ro INTEGER .1.3.6.1.4.1.34.2.1.2.2 |
confNumProcThe number of processor in a system board.
The max # processors in a Starfire system is
64.ro INTEGER .1.3.6.1.4.1.34.2.1.2.3 |
confNumConBrdThe number of control board in the system.
The max # control board in a Starfire system
is 2.ro INTEGER .1.3.6.1.4.1.34.2.1.2.4 |
confNumCenterplaneThe number of centerplane in the system.
The max # centerplane half board in a Starfire
system is 2.ro INTEGER .1.3.6.1.4.1.34.2.1.2.5 |
confNumSuppBrdThe number of centerplane support board
in the system. The max # of centerplane
support board in a Starfire system is 2.ro INTEGER .1.3.6.1.4.1.34.2.1.2.6 |
confNumIoCabThe number of IO cabinet connected to the
system. The max # of IO cabinets that can
be connected to a Starfire system is 3.ro INTEGER .1.3.6.1.4.1.34.2.1.2.7 |
confNumFanTrayThe number of fan tray in the system. The
max # of fan trays that can be installed in
a Starfire system is 16.ro INTEGER .1.3.6.1.4.1.34.2.1.2.8 |
confNumBulkPowerThe number of bulk power supply in the system.
The max # of bulk power supply in a Starfire
system is 8.ro INTEGER .1.3.6.1.4.1.34.2.1.2.9 |
confNumSysBrdPowerThe number of system board power supply in
the system. The max # of system board
power supply for a Starfire system is 16. In
Starfire, system board power supply is not
a separate entity. It is integrated in
a system board.ro INTEGER .1.3.6.1.4.1.34.2.1.2.10 |
confSysBrdListA string identifying the system boards
that are present in the system. The format
of the string is: xx-xx-.. where xx is the
system board number and the delimiter is a
dash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.11 |
confProcListA string identifying the processors that are
present in the system. The format of the
string is: bb.pp-bb.pp-... where bb is the
system board number and pp is the processor
number within a system board, the delimiter
is a dash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.12 |
confConBrdListA string identifying the control boards
that are present in the system. The format
of the string is: xx-xx-.. where xx is the
control board number and dash is the
delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.13 |
confCenterplaneListA string identifying the centerplanes
that are present in the system. The format
of the string is: xx-xx-.. where xx is the
centerplane number and dash is the
delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.14 |
confSuppBrdListA string identifying the centerplane support
boards that are present in the system. The
format of the string is: xx-xx-... where xx
is the centerplane support board number and
dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.15 |
confIoCabListA string identifying the IO cabinets that are
connected to the system. The format of the
string is: xx-xx-... where xx is the I/O
cabinet number and dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.16 |
confFanTrayListA string identifying the fan trays that
are present in the system. the format of the
string is: xx-xx-... where xx is the fan
tray number and dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.17 |
confBulkPowerListA string identifying the bulk power
supplies that are present in the system. The
format of the string is: x-x where x is
the bulk power supply number and dash is
the delimiter. Bulk power supplies are
numbered 0 to 7.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.18 |
confSysBrdPowerListA string identifying the system board
power supplies that are present in the system.
The format of the string: xx-xx-... where
xx is the system board power supply number
and dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.2.19 |
confMaxProcPerSysBrdThe maximum number of processor in a system
board. There is a max of 4 processors in
a Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.1.2.20 |
confMaxFanPerTrayThe maximum number of fan in a fan tray. There
is a max of 2 fan in a Starfire fan tray.ro INTEGER .1.3.6.1.4.1.34.2.1.2.21 |
confMaxLEDPerFanTrayThe maximum number of LED in a fan tray. There
is a max of 2 LEDs in a Starfire fan tray.ro INTEGER .1.3.6.1.4.1.34.2.1.2.22 |
confMaxLEDPerBulkPowerThe maximum number of LED in a bulk power
supply. There is a max of 2 LEDs in a Starfire
bulk power supply.ro INTEGER .1.3.6.1.4.1.34.2.1.2.23 |
confMaxLEDPerSysBrdThe maximum number of LED in a system board.ro INTEGER .1.3.6.1.4.1.34.2.1.2.24 |
confMemAddrMapStarfire supports Shared Memory Domains. This
requires the memory boards in the machine to
have unique address. Because of this global
requirement, Starfire hpost assigns the
memory addresses, as well as for attaching
boards. DR detach operation also assigns
memory addresses. The method used to ensure
unique addresses is to assign addresses
based on slot number. To allow for 2 way
inter-board interleaving, these addresses
are slot number*8G.
The map is a 16-byte array representing the 16
slots. The lower 7 bits of each byte
represents the unique address assign to that
slot. The high bit is significant on a
write-operation only, when set the
corresponding slot of the map will be changed
with the address represented by the lower
7 bits. On a read operation the returning data
represents the current memory map and the high
bit of each byte is always 0. On a write
operation the byte with the high bit set will
be modified.
The SNMP agent will perform a consistency check
before committing a write operation.
Consistency check simply makes sure no two slots
will contain the same address if the write is
performed. If consistency check fails, the write
operation will return an error.rw OCTET STRING .1.3.6.1.4.1.34.2.1.2.25 |
domainTableThe domain table. The number of entries in
the table is given by conf.confNumDomain. SEQUENCE OF DomainEntry .1.3.6.1.4.1.34.2.1.3 |
domainEntryA domain table entry. DomainEntry .1.3.6.1.4.1.34.2.1.3.1 |
domainIndexA number assigned to a domain.ro INTEGER .1.3.6.1.4.1.34.2.1.3.1.1 |
domainNameDomain name in ASCII format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.2 |
domainNumSysBrdThe number of system board assigned to this
domain.ro INTEGER .1.3.6.1.4.1.34.2.1.3.1.3 |
domainSysBrdListA list of system board entries belonging to
this domain. The number of boards is given by
domainNumSysBrd. The format of the string
is: xx-xx where xx is the system board
number and dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.4 |
domainOSVersionThe OS version for this domain.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.5 |
domainProcListA list of processors belonging to this domain.
The format of the string is in:
ss.bb-ss.bb-... where ss is the system board
number, bb is the processor number within
a system board, and dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.6 |
domainBootProcThe boot processor number of this domain. If the value
is -1, that means the domain is not configured/booted.rw INTEGER .1.3.6.1.4.1.34.2.1.3.1.7 |
domainInterruptVectorInterrupts to the host processor via JTAG
requires 2 pieces of information: the UPA ID
of the target CPU and the interrupt number
assigned to the bootbus interrupt by the host.
The target UPA ID identifies the particular
bootbus and the proc ID (0 or 1) to be written
into the bootbus interrupt register. The
interrupt number is the value to be
written into word 0 of the mondo vector
of the target CPU. This number is computed
by the host kernel.
This object is a 13 bit value and is treated
as an integer (32 bit) for easy manipulation.rw INTEGER .1.3.6.1.4.1.34.2.1.3.1.8 |
domainSysBrdConfigA list of configured system board entries
belonging to this domain. The format of the
string is: xx-xx where xx is the system board
number and dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.9 |
domainProcConfigPOST scans both blacklist and redlist files
to determine which components should not be
used to configure a domain. The content of
the blacklist and redlist files along with
the final result of a POST run is kept in a
data structure, P2OBP, in the boot
processor's BBSRAM. The SNMP agent is
responsible to retrieve the data structure
and extracts the necessary information to
produce the result.
domainProcConfig describes the processors
configuration. Its format is a DisplayString
(character string) in the format of
xx.yyS-xx.yyS-... where xx is a system
board number [0..15], yy is a processor
number within a system board [0..3],
S is a single character status code,
and (dash) '-' is for delimiting multiple
components. Valid status code include:
F - Tested and Failed
M - Missing
R - Redlisted
B - Blacklisted
c - Crunched
U - Good but not configured
G - Good
A - Architecturally missingro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.10 |
domainABusConfigdomainAbusConfig describes the address bus
configuration. Its format is a DisplayString
in the format of xxS-xxS-... where xx is an
address bus [0..3] and S is a status code
(see domainProcConfig).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.11 |
domainDBusConfigdomainDbusConfig describes the data bus
configuration. Its format is a DisplayString
in the format of xxS-xxS where xx is a data
bus [0..1] and S is a status code
(see domainProcConfig).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.3.1.12 |
sysBrdGenTableSystem board table. The number host of
entries in the table is represented by
Conf.ConfNumSysBrd. SEQUENCE OF SysBrdGenEntry .1.3.6.1.4.1.34.2.1.4 |
sysBrdGenEntryA system board table entry. SysBrdGenEntry .1.3.6.1.4.1.34.2.1.4.1 |
sysBrdGenIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.1.4.1.1 |
sysBrdGenNumA unique number assigned to a system board.
Index begins with 1.ro INTEGER .1.3.6.1.4.1.34.2.1.4.1.2 |
sysBrdGenPowerPower status of the system board. To control
power to a system board, modify the
sysBrdGenPowerControl.ro Enumeration .1.3.6.1.4.1.34.2.1.4.1.3 |
sysBrdGenNumProcNumber of processor that are present in this
system board.ro INTEGER .1.3.6.1.4.1.34.2.1.4.1.4 |
sysBrdGenProcListA string containing the processors list that
are present in this system board. The format
of the string is: xx-xx where xx is the
processor number within a system board, and
dash is the delimiter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.1.4.1.5 |
sysBrdGenResetThis member resets the system board.rw Enumeration .1.3.6.1.4.1.34.2.1.4.1.6 |
sysBrdGenPowerControlOn reading it returns the power status of this
system board power supply. On writing, it
turns on/off this system board power supply.rw Enumeration .1.3.6.1.4.1.34.2.1.4.1.7 |
procStateGenTableA table of processor entries. SEQUENCE OF ProcStateGenEntry .1.3.6.1.4.1.34.2.1.5 |
procStateGenEntryA processor state table entry. ProcStateGenEntry .1.3.6.1.4.1.34.2.1.5.1 |
procStateGenIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.1.5.1.1 |
procStateGenNumA unique number assigned to each CPU.ro INTEGER .1.3.6.1.4.1.34.2.1.5.1.2 |
procStateGenHeartbeatA counter being updated by the kernel.
This serves an as indicator that the
kernel is alive and well.ro INTEGER (0..'ffffffff'h) SYNTAX Counter .1.3.6.1.4.1.34.2.1.5.1.3 |
procStateGenPgmSignatureThis value represents the current program
running on a processor. Only 4 programs
are identified: POST, Download_helper,
OBP, and the kernel.ro Enumeration .1.3.6.1.4.1.34.2.1.5.1.4 |
procStateGenPgmStateThis value represents the current state of
the program running on a processor.
#define SIGBST_NONE 0 /* no state */
#define SIGBST_RUN 1 /* running */
#define SIGBST_EXIT 2 /* finished */
#define SIGBST_PRERUN 3 /* pre-exec */
#define SIGBST_ARBSTOP 4 /* transient arbstop state */
#define SIGBST_RESET 5 /* reset */
#define SIGBST_POWEROFF 6 /* no power */
#define SIGBST_DETACHED 7 /* spinning in OBP after DR DETACH */
#define SIGBST_CALLBACK 8 /* kernel calling back into OBP */
#define SIGBST_WATCHDOG 9 /* OBP running after watchdog */
#define SIGBST_WATCHDOG_SYNC 10 /* OBP sync after watchdog reset */
#define SIGBST_OFFLINE 11 /* cpu offline */
#define SIGBST_BOOTING 12 /* booting */
#define SIGBST_UNKNOWN 13 /* unknown */
#define SIGBST_XIR 14 /* OBP running after XIR */
#define SIGBST_XIR_SYNC 15 /* OBP trying sync in XIR */
#define SIGBST_SIR 16 /* OBP running after SIR */
#define SIGBST_SIR_SYNC 17 /* OBP trying sync in SIR */
#define SIGBST_REDMODE 18 /* OBP running after REDMODE */
#define SIGBST_REDMODE_SYNC 19 /* OBP trying sync in REDMODE */
#define SIGBST_QUIESCED 20 /* system quiesced */
#define SIGBST_QUIESCE_INPROGRESS 21 /* system quiesce in-progress */
#define SIGBST_RESUME_INPROGRESS 22 /* system resume in-progress */ro Enumeration .1.3.6.1.4.1.34.2.1.5.1.5 |
procStateGenPgmSubStateThis value represents a finer detail of the
current state of the program running on a
processor.
#define EXIT_NULL 0
#define EXIT_HALT 1
#define EXIT_ENVIRON 2
#define EXIT_REBOOT 3
#define EXIT_PANIC1 4
#define EXIT_PANIC2 5
#define EXIT_HUNG 6
#define EXIT_WATCH 7
#define EXIT_PANIC_REBOOT 8
#define EXIT_WATCHDOG_REBOOT 9
#define EXIT_SOFT_INIT_RESET 10 /* SIR */
#define EXIT_EXTERN_INIT_RESET 11 /* XIR */
#define EXIT_REDMODE_REBOOT 12 /* REDMODE */
#define EXIT_OBP_RESET 13 /* OBP RESET */ro Enumeration .1.3.6.1.4.1.34.2.1.5.1.6 |
procStateGenTempThe processor temperature.ro INTEGER .1.3.6.1.4.1.34.2.1.5.1.7 |
procCommGenTableA table of processor communication entries. SEQUENCE OF ProcCommGenEntry .1.3.6.1.4.1.34.2.1.6 |
procCommGenEntryA processor communication table entry. ProcCommGenEntry .1.3.6.1.4.1.34.2.1.6.1 |
procCommGenIndexA unique number assigned to each CPU.ro INTEGER .1.3.6.1.4.1.34.2.1.6.1.1 |
procCommGenNumA unique number assigned to each CPU.ro INTEGER .1.3.6.1.4.1.34.2.1.6.1.2 |
procCommGenSspMboxLenThe length of SSP-to-Host mailbox. This
mailbox is used to instruct the host to
perform a specific command.rw INTEGER .1.3.6.1.4.1.34.2.1.6.1.3 |
procCommGenSspMboxFlagThe flag of SSP-to-Host mailbox.rw INTEGER .1.3.6.1.4.1.34.2.1.6.1.4 |
procCommGenSspMboxCmdThe command of SSP-to-Host mailbox.rw Enumeration .1.3.6.1.4.1.34.2.1.6.1.5 |
procCommGenSspMboxDataThe data in the SSP-to-Host mailbox.rw OCTET STRING .1.3.6.1.4.1.34.2.1.6.1.6 |
procCommGenHostMboxLenThe length of Host-to-SSP mailbox.rw INTEGER .1.3.6.1.4.1.34.2.1.6.1.7 |
procCommGenHostMboxFlagThe flag of Host-to-SSP mailbox.rw INTEGER .1.3.6.1.4.1.34.2.1.6.1.8 |
procCommGenHostMboxCmdThe command of Host-to-SSP mailbox.rw Enumeration .1.3.6.1.4.1.34.2.1.6.1.9 |
procCommGenHostMboxDataThe data in the Host-to-SSP mailbox. This
mailbox serves for communication between
OBP running on the host and obp_helper
running on the SSP.rw OCTET STRING .1.3.6.1.4.1.34.2.1.6.1.10 |
procCommGenObpMboxLenThe length of Obp-to-SSP mailbox.rw INTEGER .1.3.6.1.4.1.34.2.1.6.1.11 |
procCommGenObpMboxFlagThe flag of Obp-to-SSP mailbox.rw INTEGER .1.3.6.1.4.1.34.2.1.6.1.12 |
procCommGenObpMboxCmdThe command of Obp-to-SSP mailbox.
#define SSPC_MULTIPROC 0x0b0b0001 /* Request to release slave CPUs */
#define SSPC_GETTOD 0x0b0b0002 /* Get Unix time of day from SSP */
#define SSPC_GETEEPROM 0x0b0b0003 /* Get EEPROM image from SSP */
#define SSPC_PUTEEPROM 0x0b0b0004 /* Put EEPROM image to SSP */
#define SSPC_UPDREBOOT 0x0b0b0005 /* Invalidate Reboot-info in eeprom */
#define SSPC_MOVECPU0 0x0b0b0006 /* Move Cpu0 Command */
#define SSPC_GETAPDATABASELOC 0x0b0b0007 /* Get AP database location */
#define SSPC_SAVEBOOTPATH 0x0b0b0008 /* Store boot path info */rw Enumeration .1.3.6.1.4.1.34.2.1.6.1.13 |
procCommGenObpMboxDataThe data in the Obp-to-SSP mailbox.rw OCTET STRING .1.3.6.1.4.1.34.2.1.6.1.14 |
procCommGenCvcInputDataThe input buffer to cvc.rw OCTET STRING .1.3.6.1.4.1.34.2.1.6.1.15 |
procCommGenCvcOutputDataThe output buffer to cvc.rw OCTET STRING .1.3.6.1.4.1.34.2.1.6.1.16 |
cbGenTableA table of general control board entries. SEQUENCE OF CbGenEntry .1.3.6.1.4.1.34.2.1.7 |
cbGenEntryA general control board table entry. CbGenEntry .1.3.6.1.4.1.34.2.1.7.1 |
cbGenIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.1.7.1.1 |
cbGenNumA unique number assigned to a control board.ro INTEGER .1.3.6.1.4.1.34.2.1.7.1.2 |
cbGenPowerPower status of the control board.ro Enumeration .1.3.6.1.4.1.34.2.1.7.1.3 |
cbGenPowerControlOn writing, it turns off this control board
power supply. By default, control board is
powered on automatically upon insertion to the
cabinet or when house keeping power is applied.
On reading, it always returns off.rw Enumeration .1.3.6.1.4.1.34.2.1.7.1.4 |
ioCabGenTableA table of general IO cabinet entries. SEQUENCE OF IoCabGenEntry .1.3.6.1.4.1.34.2.1.8 |
ioCabGenEntryA general I/O cabinet table entry. IoCabGenEntry .1.3.6.1.4.1.34.2.1.8.1 |
ioCabGenIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.1.8.1.1 |
ioCabGenNumA unique number assigned to an I/O Cabinet.ro INTEGER .1.3.6.1.4.1.34.2.1.8.1.2 |
ioCabGenPowerA value identifying the current power state
of an IO cabinet and also for powering on
and off the I/O cabinet.rw Enumeration .1.3.6.1.4.1.34.2.1.8.1.3 |
fanTrayGenTableA table of fan tray entries. SEQUENCE OF FanTrayGenEntry .1.3.6.1.4.1.34.2.1.10 |
fanTrayGenEntryA fan tray table entry. FanTrayGenEntry .1.3.6.1.4.1.34.2.1.10.1 |
fanTrayGenIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.1.10.1.1 |
fanTrayGenNumA unique number assigned to a fan tray.ro INTEGER .1.3.6.1.4.1.34.2.1.10.1.2 |
fanTrayGenPowerOn reading this object, it returns the
power status of this fan tray. On writing
it turns on/off the fan tray power.rw Enumeration .1.3.6.1.4.1.34.2.1.10.1.3 |
fanGenTableA table of fan entries. Each fan tray has
certain number of fans. The number is
represented by ConfMaxFanPerTray. SEQUENCE OF FanGenEntry .1.3.6.1.4.1.34.2.1.11 |
fanGenEntryA fan tray entry containing information
about a fan tray. Each fan entry is
uniquely identified by 2 fields: fan tray
number and fan number. FanGenEntry .1.3.6.1.4.1.34.2.1.11.1 |
fanGenIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.1.11.1.1 |
fanGenTraySlotNumA unique number assigned to a fan tray slot.ro INTEGER .1.3.6.1.4.1.34.2.1.11.1.2 |
fanGenNumA unique number assigned to a fan inside this
tray.ro INTEGER .1.3.6.1.4.1.34.2.1.11.1.3 |
fanGenStatusOn reading it returns the power status
of this fan. On writing it allows an
application to turn on/off this fan.rw Enumeration .1.3.6.1.4.1.34.2.1.11.1.4 |
fanGenSpeedOn reading it returns the speed of this fan
inside a fan tray. On writing, it allows one
to change the speed of this fan. Nominal is
the medium speed the fan will support, and
fast is the highest fastest speed the fan will support.rw Enumeration .1.3.6.1.4.1.34.2.1.11.1.5 |
fanGenPowerControlThe MIB object that is used to either power
on or off this fan. The power status of this fan
should be read from the fanGenStatus MIB object.
On writing, the fan is either turned on or off.rw Enumeration .1.3.6.1.4.1.34.2.1.11.1.6 |
suppBrdGenTableA table of support board entries. SEQUENCE OF SuppBrdGenEntry .1.3.6.1.4.1.34.2.1.13 |
suppBrdGenEntryA support board table entry. SuppBrdGenEntry .1.3.6.1.4.1.34.2.1.13.1 |
suppBrdGenIndexA unique number assigned to this support
board.ro INTEGER .1.3.6.1.4.1.34.2.1.13.1.1 |
suppBrdGenNumA unique number assigned to this support
board.ro INTEGER .1.3.6.1.4.1.34.2.1.13.1.2 |
suppBrdGenPowerPower status of the support board.ro Enumeration .1.3.6.1.4.1.34.2.1.13.1.3 |
suppBrdGenPowerControlOn reading it returns the power status of this
support board power suuply. On writing, it
turns on/off this support board power supply.rw Enumeration .1.3.6.1.4.1.34.2.1.13.1.4 |
bulkPowerGenTableA table of bulk power supply entries. SEQUENCE OF BulkPowerGenEntry .1.3.6.1.4.1.34.2.1.14 |
bulkPowerGenEntryA bulk power supply table entry. BulkPowerGenEntry .1.3.6.1.4.1.34.2.1.14.1 |
bulkPowerGenIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.1.14.1.1 |
bulkPowerGenNumA unique number assigned to this bulk power
supply.ro INTEGER .1.3.6.1.4.1.34.2.1.14.1.2 |
bulkPowerGenControlThe MIB object that is used to power off this
bulk power supply. On writing, it powers off
this bulk power supply.rw Enumeration .1.3.6.1.4.1.34.2.1.14.1.3 |
bulkPowerGenStatusPower status of the bulk power supply.
A status of ok implies the unit is on and
supplying enough voltage/current. A status
of fail implies the unit is on but not
supplying enough voltage/current or the unit is off.ro Enumeration .1.3.6.1.4.1.34.2.1.14.1.4 |
ue10000 OBJECT IDENTIFIER .1.3.6.1.4.1.34.2.2 |
sysBrdStarfireTableSystem board table. The number host of
entries in the table is represented by
Conf.ConfNumSysBrd. SEQUENCE OF SysBrdStarfireEntry .1.3.6.1.4.1.34.2.2.1 |
sysBrdStarfireEntryA system board table entry. SysBrdStarfireEntry .1.3.6.1.4.1.34.2.2.1.1 |
sysBrdStarfireIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.1 |
sysBrdStarfireNumA unique number assigned to a system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.2 |
sysBrdStarfireCIC0TempThe temperature of the CIC0 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.3 |
sysBrdStarfireCIC1TempThe temperature of the CIC1 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.4 |
sysBrdStarfireMCTempThe temperature of the MC ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.5 |
sysBrdStarfireXDB2TempThe temperature of the XDB2 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.6 |
sysBrdStarfireXDB3TempThe temperature of the XDB3 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.7 |
sysBrdStarfirePROC0TempThe temperature of the PROC0 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.8 |
sysBrdStarfirePROC1TempThe temperature of the PROC1 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.9 |
sysBrdStarfirePROC2TempThe temperature of the PROC2 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.10 |
sysBrdStarfirePROC3TempThe temperature of the PROC3 ASIC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.11 |
sysBrdStarfire3p3VDCTempThe temperature of the PS2 3.3V DC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.12 |
sysBrdStarfireVDCCoreTempThe temperature of the PS3 VDD Core on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.13 |
sysBrdStarfire5VDCTempThe temperature of the PS5 5V DC on this
Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.14 |
sysBrdStarfire3p3VDCThe VDD voltage reading of this Starfire
system board, which is equivalent to 3.3VDC.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.15 |
sysBrdStarfire5VDCHKThe 5V DC housekeeping voltage reading of
this Starfire system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.16 |
sysBrdStarfire5VDCThe 5V DC voltage reading of this Starfire
system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.17 |
sysBrdStarfireVDCCoreThe VDD Core voltage reading of this Starfire
system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.18 |
sysBrdStarfire3p3VDCHKThe 3.3V DC voltage reading of this Starfire
system board.ro INTEGER .1.3.6.1.4.1.34.2.2.1.1.19 |
cbStarfireTableA table of control board entries. SEQUENCE OF CbStarfireEntry .1.3.6.1.4.1.34.2.2.2 |
cbStarfireEntryA control board table entry. CbStarfireEntry .1.3.6.1.4.1.34.2.2.2.1 |
cbStarfireIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.1 |
cbStarfireNumA unique number assigned to a control board.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.2 |
cbStarfireHostNameHost name assigned to this control board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34.2.2.2.1.3 |
cbStarfire5VDCTempThe temperature of PS1.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.4 |
cbStarfire5VDCPerTempThe temperature of PS2.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.5 |
cbStarfire5VDCFanTempThe temperature of PS3.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.6 |
cbStarfireSen0TempThe temperature of the 1st temperature
sensor.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.7 |
cbStarfireSen1TempThe temperature of the 2nd temperature
sensor.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.8 |
cbStarfireSen2TempThe temperature of the 3rd temperature
sensor.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.9 |
cbStarfire5VDCThe voltage reading of 5V DC.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.10 |
cbStarfire5VDCHKThe voltage reading of housekeeping 5V DC.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.11 |
cbStarfire3p3VDCHKThe voltage reading of housekeeping 3.3V DC.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.12 |
cbStarfire5VDCPerThe voltage reading of VccPer.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.13 |
cbStarfire5VDCFanThe voltage reading of VccFan.ro INTEGER .1.3.6.1.4.1.34.2.2.2.1.14 |
centerplaneStarfireTableA table of centerplane entries. SEQUENCE OF CenterplaneStarfireEntry .1.3.6.1.4.1.34.2.2.3 |
centerplaneStarfireEntryA centerplane table entry. CenterplaneStarfireEntry .1.3.6.1.4.1.34.2.2.3.1 |
centerplaneStarfireIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.1 |
centerplaneStarfireNumA unique number assigned to this centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.2 |
centerplaneStarfireTemp0The 1st temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.3 |
centerplaneStarfireTemp1The 2nd temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.4 |
centerplaneStarfireTemp2The 3rd temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.5 |
centerplaneStarfireTemp3The 4th temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.6 |
centerplaneStarfireTemp4The 5th temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.7 |
centerplaneStarfireTemp5The 6th temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.8 |
centerplaneStarfireTemp6The 7th temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.9 |
centerplaneStarfireTemp7The 8th temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.10 |
centerplaneStarfireTemp8The 9th temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.11 |
centerplaneStarfireTemp9The 10th temp point of this Starfire centerplane.ro INTEGER .1.3.6.1.4.1.34.2.2.3.1.12 |
suppBrdStarfireTableA table of support board entries. SEQUENCE OF SuppBrdStarfireEntry .1.3.6.1.4.1.34.2.2.4 |
suppBrdStarfireEntryA support board table entry. SuppBrdStarfireEntry .1.3.6.1.4.1.34.2.2.4.1 |
suppBrdStarfireIndexAn index into this table.ro INTEGER .1.3.6.1.4.1.34.2.2.4.1.1 |
suppBrdStarfireNumA unique number assigned to this support board.ro INTEGER .1.3.6.1.4.1.34.2.2.4.1.2 |
suppBrdStarfire3p3VDC1TempThe PS1 temp point of this Starfire support board.ro INTEGER .1.3.6.1.4.1.34.2.2.4.1.3 |
suppBrdStarfire3p3VDC2TempThe PS2 temp point of this Starfire support board.ro INTEGER .1.3.6.1.4.1.34.2.2.4.1.4 |
suppBrdStarfire5VDCHKThe 5V DC voltage in this Starfire
support board.ro INTEGER .1.3.6.1.4.1.34.2.2.4.1.5 |
suppBrdStarfire3p3VDCHKThe 3.3V DC housekeeping voltage in this
Starfire support board.ro INTEGER .1.3.6.1.4.1.34.2.2.4.1.6 |
suppBrdStarfire3p3VDCThe CP 3.3V DC housekeeping voltage in this
Starfire support board.ro INTEGER .1.3.6.1.4.1.34.2.2.4.1.7 |
ssp OBJECT IDENTIFIER .1.3.6.1.4.1.34.2.3 |
sspPlatformApp OBJECT IDENTIFIER .1.3.6.1.4.1.34.2.3.1 |
sspPlatformAppEddControlThe object identifies the action intended
for the EDD. Changing this object will cause
the agent to send a eddControl trap.
Reading this object returns the last action
requested for the EDD. The SNMP agent does
not maintain persistent information for this
object. It will be initialized to unknown
value.rw Enumeration .1.3.6.1.4.1.34.2.3.1.1 |
sspPlatformAppEddStateThe object identifies the current state
of the Event Detector Daemon. Changing this
object will cause the agent to send a
eddState trap. Reading this object returns
the last changed state of the EDD. The SNMP
agent does not maintain persistent
information for this object. It will be
initialized to unknown.rw Enumeration .1.3.6.1.4.1.34.2.3.1.2 |