CPQN54NN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CPQN54NN-MIB.
28
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
compaq OBJECT IDENTIFIER .1.3.6.1.4.1.232 |
RFC-1215 Unknown .1.3.6.1.4.1.232 |
cpqGigaSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.232.111 |
overheatA overheat trap indicates that the on board
tempature sensor has reported a overheat
condition. System will shutdown until unit has
sufficiently cooled such that operation may begin
again. A cold start trap will be issued when
the unit has come back on line. TRAP-TYPE .1.3.6.1.4.1.232.111.0.6 |
fanfailedA fan failed trap indicates one or more of the
cooling fans inside the device has failed. A
fanOK trap will be sent once the fan has attained
normal operation. TRAP-TYPE .1.3.6.1.4.1.232.111.0.7 |
fanOKA fan has transitioned out of a failure state and
is now operating correctly. TRAP-TYPE .1.3.6.1.4.1.232.111.0.8 |
invalidLoginAttemptA user attempted to login to console or by telnet but was refused
access due to incorrect username or password TRAP-TYPE .1.3.6.1.4.1.232.111.0.9 |
powerSupplyFailOne or more sources of power to this agent has failed.
Presumably a redundant power-supply has taken over. TRAP-TYPE .1.3.6.1.4.1.232.111.0.10 |
powerSupplyGoodOne or more previously bad sources of power to this agent
has come back to life without causing an agent restart. TRAP-TYPE .1.3.6.1.4.1.232.111.0.11 |
rpsAlarmAttached Redundant Power Supply device is indicating
an alarm condition. TRAP-TYPE .1.3.6.1.4.1.232.111.0.12 |
rpsNoAlarmAttached Redundant Power Supply device is no longer
indicating an alarm condition. TRAP-TYPE .1.3.6.1.4.1.232.111.0.13 |
cpqGigaSwitchProd OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.1 |
cpqGigaSwitchId5422 OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.1.1 |
cpqGigaSwitchId5411 OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.1.2 |
cpqOids OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2 |
cpqMauType OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2.1 |
cpqMauType1000BaseSX OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2.1.1 |
cpqMauType1000BaseLX OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2.1.2 |
cpqMauType1000BaseCX OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2.1.3 |
cpqMauType1000BaseSXFD OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2.1.4 |
cpqMauType1000BaseLXFD OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2.1.5 |
cpqMauType1000BaseCXFD OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.2.1.6 |
cpqGigaSwitchMib OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.3 |
cpqGigaSwitchSystem OBJECT IDENTIFIER .1.3.6.1.4.1.232.111.3.1 |
cpqSaveConfigurationWhen this object is set, the device will copy the contents
of the configuration database to a buffer and save it to the
persistant store specified by the value of the object. The
save is performed asynchronously, and the snmp agent will continue
to respond to both gets and sets while the save is taking
place. A network management application may use the
cpqSaveStatus object to determine when the asynchronous
save operation has completed.rw Enumeration .1.3.6.1.4.1.232.111.3.1.3 |
cpqSaveStatusThis object will return the status of a save operation invoked
by setting the cpqSaveConfiguration object. A network
management application can read this object to determine that a
save operation has completed.ro Enumeration .1.3.6.1.4.1.232.111.3.1.4 |
cpqCurrentConfigInUseShows which configuration store was used at last bootro Enumeration .1.3.6.1.4.1.232.111.3.1.5 |
cpqConfigToUseOnRebootControls which configuration store will be used on next reboot.rw Enumeration .1.3.6.1.4.1.232.111.3.1.6 |