CPQN5226A-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CPQN5226A-MIB.
155
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
155 total| Object Name |
|---|
compaq OBJECT IDENTIFIER .1.3.6.1.4.1.232 |
RFC1213-MIB Unknown .1.3.6.1.4.1.232 |
compaq-dallas-npd OBJECT IDENTIFIER .1.3.6.1.4.1.232.101 |
switchedMedia OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2 |
cpqn52nn OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2 |
cpqn52nnPowerSupplyStatusTrapA cpqn52nnPowerSupplyStatus Trap is sent whenever a power supply
changes state from voltage-ok to voltage-not-ok or vice versa. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.1 |
cpqn52nnUplinkInsertedTrapThe cpqn52nnMepInserted trap is sent whenever a MEP, that
represents a physical interface, is added. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.2 |
cpqn52nnUplinkRemovedTrapThe cpqn52nnMepRemoved trap is sent whenever a MEP, that
represents a physical interface, is removed. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.3 |
cpqn52nnBusMonRisingThresholdTrapThe SNMP trap that is generated when an alarm
entry crosses its rising threshold and generates
an event that is configured for sending SNMP
traps. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.4 |
cpqn52nnBusMonFallingThresholdTrapThe SNMP trap that is generated when an alarm
entry crosses its falling threshold and generates
an event that is configured for sending SNMP
traps. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.5 |
cpqb52nnGlobalBcastMemCongestionTrapThe SNMP trap that is generated when an alarm
entry crosses its rising or falling threshold and
generates an event that is configured for sending
SNMP traps. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.7 |
cpqb52nnPortTxPktCongestionTrapThe SNMP trap that is generated when an alarm
entry crosses its rising or falling threshold and
generates an event that is configured for sending
SNMP traps. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.8 |
cpqb52nnPortRxMemCongestionTrapThe SNMP trap that is generated when an alarm
entry crosses its rising or falling threshold and
generates an event that is configured for sending
SNMP traps. TRAP-TYPE .1.3.6.1.4.1.232.101.2.2.0.9 |
cpqn52nnOIDInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.1 |
cpqn5226 OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.1.1 |
cpqn5226A OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.1.3 |
cpqn52nnModuleInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.2 |
cpqn52nnVT100ScreenRefreshDURABLE: This object will determine the rate, in seconds, at which
the VT100 screen will refresh the automatic fields (e.g., statistics).
The default value will be 5 seconds.rw INTEGER .1.3.6.1.4.1.232.101.2.2.2.1 |
cpqn52nnBooterWriteCyclesThis object will allow the user to see the number of erase/writes that
have been made to the Booter firmware sectors on the FLASH PROM chip.ro INTEGER .1.3.6.1.4.1.232.101.2.2.2.2 |
cpqn52nnRuntimeWriteCyclesThis object will allow the user to see the number of erase/writes that
have been made to the Runtime firmware sectors on the FLASH PROM chip.ro INTEGER .1.3.6.1.4.1.232.101.2.2.2.3 |
cpqn52nnSwitchModeTypeDURABLE: This object will determine the operational mode of
the switch. The default will be store-and-forward(1).
Fragment-free is not supported on 5226 nor 5226A.rw Enumeration .1.3.6.1.4.1.232.101.2.2.2.4 |
cpqn52nnCreateTimeoutDURABLE: The minimum number of 5 minute intervals a table entry can have a status
of underCreate before the agent may delete the object. The default value
will be 1 5 minute interval.rw INTEGER .1.3.6.1.4.1.232.101.2.2.2.5 |
cpqn52nnPowerSupplyTableA table of system power supply specific information. SEQUENCE OF Cpqn52nnPowerSupplyEntry .1.3.6.1.4.1.232.101.2.2.2.6 |
cpqn52nnPowerSupplyEntryA list of information for every power supply installed Cpqn52nnPowerSupplyEntry .1.3.6.1.4.1.232.101.2.2.2.6.1 |
cpqn52nnPsIndexA unique value for each power supply.ro Enumeration .1.3.6.1.4.1.232.101.2.2.2.6.1.1 |
cpqn52nnPsStatusThe status of the power supply. The value good(1) is returned if the
power supply identified by cpqn52nnPSIndex is running properly. The
value bad(2) is returned if the power supply identified by cpqn52nnPSIndex
has failed to operate properly but has been inserted into the slot. This
will include an inserted power supply with no power. The value na(3) is
returned if the power supply has not been inserted into the slot.ro Enumeration .1.3.6.1.4.1.232.101.2.2.2.6.1.2 |
cpqn52nnMemoryInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.3 |
cpqn52nnHashInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.3.1 |
cpqn52nnHashTableSizeDURABLE: The number of address table entries, in 1024 increments,
allowed for the switch. NOTE that a smaller size table will increase
the likelihood of broadcasts based on unknown unicasts i.e. addresses
that have not been learned. The 5226 and 5226A allows set of 8K only.rw Enumeration .1.3.6.1.4.1.232.101.2.2.3.1.1 |
cpqn52nnRmonMemory OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.3.2 |
cpqn52nnMaxMemoryKbytes of memory that can be used for RMON. Actually this number does not
include some overhead needed to support the software. This number should be
set in the implementation of the agent to assure that memory is always
available for the overhead.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.1 |
cpqn52nnMemAllocFailureThe time of the last memory allocation failure that resulted from no
more physical memory available in the agent. This value is in secondsro INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.2 |
cpqn52nnRmonMemoryCeilingDURABLE: Kbytes of memory RMON code may use, not counting any overhead.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.3 |
cpqn52nnStatisticsMemoryCeilingDURABLE: Kbytes of memory that the RMON statistics group may use.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.4 |
cpqn52nnHistoryMemoryCeilingDURABLE: Kbytes of memory that the RMON history group may use.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.5 |
cpqn52nnAlarmMemoryCeilingDURABLE: Kbytes of memory that the RMON alarm group may use.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.6 |
cpqn52nnEventMemoryCeilingDURABLE: Kbytes of memory that the RMON event group may use.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.7 |
cpqn52nnRmonMemoryUsedKbytes of memory used by RMON, rounded up.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.8 |
cpqn52nnStatisticsMemoryUsedKbytes of memory that the RMON statistics group has used.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.9 |
cpqn52nnHistoryMemoryUsedKbytes of memory that the RMON history group has used.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.10 |
cpqn52nnAlarmMemoryUsedKbytes of memory that the RMON alarm group has used.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.11 |
cpqn52nnEventMemoryUsedKbytes of memory that the RMON event group has used.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.2.12 |
cpqn52nnMemoryThreshold OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.3.3 |
cpqn52nnMaxPktMemoryKbytes of memory that can be used for Packet Memory.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.1 |
cpqn52nnGlobalMemThreshTrapEnableDURABLE: Enable Traps for all thresholding entries in the Global Memory
group of objects. The default value is disabled.rw Enumeration .1.3.6.1.4.1.232.101.2.2.3.3.2 |
cpqn52nnBcastMemThreshEnableDURABLE: Enable thresholding for the Broadcast packet count. The default
value is disabled.rw Enumeration .1.3.6.1.4.1.232.101.2.2.3.3.3 |
cpqn52nnBcastPktCeilingDURABLE: Value in 256 packet increments of the falling threshold of
the maximum number of broadcast packets allowed in packet buffer memory.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.4 |
cpqn52nnBcastHysteresisCtlDURABLE: Number of packets that when added to the Bcast packet ceiling
produces the Rising Threshold value of the maximum number of broadcast
packets allowed in packet buffer memory.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.5 |
cpqn52nnBcastPktCntIndicator of many broadcast packets are actually in packet buffer memory.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.6 |
cpqn52nnBcastCongestionStatusIndicator of broadcast packet congestion. When congested, the number of
broadcast packets in packet buffer memory has exceeded the rising threshold,
but has not gone below the falling threshold.ro Enumeration .1.3.6.1.4.1.232.101.2.2.3.3.7 |
cpqn52nnPortMemThreshTableThis table defines something. SEQUENCE OF Cpqn52nnPortMemThreshEntry .1.3.6.1.4.1.232.101.2.2.3.3.8 |
cpqn52nnPortMemThreshEntryThis table has one entry for each port. The index
into the table is cpqn52nnPortThreshIfIndex. Cpqn52nnPortMemThreshEntry .1.3.6.1.4.1.232.101.2.2.3.3.8.1 |
cpqn52nnPortThreshIfIndexThe Interface Index as represented in MIB-II.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.1 |
cpqn52nnPortTxPktThreshEnableDURABLE: Enables or disabled transmit packet thresholding on a
per port basis.rw Enumeration .1.3.6.1.4.1.232.101.2.2.3.3.8.1.2 |
cpqn52nnPortTxPktCongestionStatusIndicator of port transmit packet congestion. When congested, the number of
transmit packets in packet buffer memory for the port has exceeded the rising
threshold, but has not gone below the falling threshold.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.3 |
cpqn52nnPortTxPktCntIndicator of how many transmit packets for the port are actually in packet
buffer memory.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.4 |
cpqn52nnPortTxPktCeilingDURABLE: Value in 256 packet increments of the falling threshold of
the maximum number of transmit packets allowed for the port in packet
buffer memory.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.5 |
cpqn52nnPortTxPktHysteresisCtlDURABLE: Number of packets that when added to the port's transmit packet
ceiling produces the Rising Threshold value of the maximum number of transmit
packets allowed for the port in packet buffer memory.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.6 |
cpqn52nnPortRxMemThreshEnableDURABLE: Enables or disables receive memory thresholding on a
per port basis.rw Enumeration .1.3.6.1.4.1.232.101.2.2.3.3.8.1.7 |
cpqn52nnPortRxMemCongestionStatusIndicator of port receive memory congestion. When congested, the amount of
receive packet buffer memory used by the port has exceeded the rising
threshold, but has not gone below the falling threshold.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.8 |
cpqn52nnPortRxMemSectorCntIndicator of how amount Packet Receive memory, in 2Kbyte increments, is
actually being used by the port.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.9 |
cpqn52nnPortRxMemCeilingDURABLE: Value in 32Kbyte increments of the falling threshold of
the maximum receive packet memory allowed for the port in packet
buffer memory.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.10 |
cpqn52nnPortRxMemHysteresisCtlDURABLE: Value in 2Kbyte increments that when added to the port's
receive memory ceiling produces the Rising Threshold value of the
maximum receive memory allowed for the port in packet buffer memory.rw INTEGER .1.3.6.1.4.1.232.101.2.2.3.3.8.1.11 |
cpqn52nnPortCongestionTrapEnableDURABLE: Enables or disabled traps due to congestion states for any Port.rw Enumeration .1.3.6.1.4.1.232.101.2.2.3.3.8.1.12 |
cpqn52nnDramInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.3.4 |
cpqn52nnDramTableThis table defines the unit's Dram information. SEQUENCE OF Cpqn52nnDramEntry .1.3.6.1.4.1.232.101.2.2.3.4.1 |
cpqn52nnDramEntryThis table has one entry for each Dram component. The index
into the table is cpqn52nnDramIndex. Cpqn52nnDramEntry .1.3.6.1.4.1.232.101.2.2.3.4.1.1 |
cpqn52nnDramIndexA simple index representing the area using the DRAM.ro Enumeration .1.3.6.1.4.1.232.101.2.2.3.4.1.1.1 |
cpqn52nnDramSizeSize of DRAM being used, in KBytes.ro INTEGER .1.3.6.1.4.1.232.101.2.2.3.4.1.1.2 |
cpqn52nnDramTypeType of DRAM being used.ro Enumeration .1.3.6.1.4.1.232.101.2.2.3.4.1.1.3 |
cpqn52nnDramSpeedSpeed of DRAM being used.ro Enumeration .1.3.6.1.4.1.232.101.2.2.3.4.1.1.4 |
cpqn52nnPortInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.4 |
cpqn52nnPortStatusTableThis table defines certain Port Level parameters for each port. SEQUENCE OF Cpqn52nnPortStatusEntry .1.3.6.1.4.1.232.101.2.2.4.1 |
cpqn52nnPortStatusEntryThis table has one entry for each port. The index
into the table is cpqn52nnPortStatusId. Cpqn52nnPortStatusEntry .1.3.6.1.4.1.232.101.2.2.4.1.1 |
cpqn52nnPortIfIndexSwitch interface number that corresponds to the interface in MIB-II.ro INTEGER .1.3.6.1.4.1.232.101.2.2.4.1.1.1 |
cpqn52nnPortIfMauIndexUniquely identifies the port in the CPQN52nn unit for which
additional info is being obtained.ro INTEGER .1.3.6.1.4.1.232.101.2.2.4.1.1.2 |
cpqn52nnPortNameDURABLE: User defined name for port.rw DisplayString .1.3.6.1.4.1.232.101.2.2.4.1.1.3 |
cpqn52nnPortTypeThis object identifies all possible port types. Note that unknown
Port Types are represented by the value 1000.ro Enumeration .1.3.6.1.4.1.232.101.2.2.4.1.1.4 |
cpqn52nnMdiMdixStatusThis object identifies all possible port types.ro Enumeration .1.3.6.1.4.1.232.101.2.2.4.1.1.5 |
cpqn52nnMdiMdixEnableThis object identifies all possible port types.rw Enumeration .1.3.6.1.4.1.232.101.2.2.4.1.1.6 |
cpqn52nnPortMonitorTableThis table defines monitor information. SEQUENCE OF Cpqn52nnPortMonitorEntry .1.3.6.1.4.1.232.101.2.2.4.2 |
cpqn52nnPortMonitorEntryThis table can be empty. Entries can be added as needed. The index
into the table is cpqn52nnPortMonitorIndex. Cpqn52nnPortMonitorEntry .1.3.6.1.4.1.232.101.2.2.4.2.1 |
cpqn52nnPortMonitorIndexA simple index represnting the number of the entry being examined.ro INTEGER .1.3.6.1.4.1.232.101.2.2.4.2.1.1 |
cpqn52nnPortMonitorRowStatusDURABLE: The status of this row entry. Rows are added to this table
using 'row sets'. When a row is added, this object must be set to
row-valid(1). To delete a row from this table, set this object for the
row to row-invalid(2). This object will always read as row-valid(1).rw CpqnRowStatus .1.3.6.1.4.1.232.101.2.2.4.2.1.2 |
cpqn52nnPortMonitorIfIndexDURABLE An index based on the interface index in MIB-II. This will
represent the interface to be used to monitor the data of others as
defined by cpqn52nnPortMonitoredIfMap.rw INTEGER .1.3.6.1.4.1.232.101.2.2.4.2.1.3 |
cpqn52nnPortMonitoredIfMapDURABLE: A bitmap indicating the ports whose data is being monitored.
The bits used to represent the are the same as the IfIndex representation
of the ports. e.g. port 25
indicates that ports 1 and 3 are being monitored. The port doing the
monitoring is defined by cpqn52nnPortMonitorIfIndex for this row in the
table.rw INTEGER .1.3.6.1.4.1.232.101.2.2.4.2.1.4 |
cpqn52nnPortMonitoredDataTypeDURABLE: The type of data to be monitored by the monitor port.
Selecting TX or RX means that only the TX or RX data will be monitored
by the monitor port.rw Enumeration .1.3.6.1.4.1.232.101.2.2.4.2.1.5 |
cpqn52nnPortBondingTableThis table defines uplink bonding information. SEQUENCE OF Cpqn52nnPortBondingEntry .1.3.6.1.4.1.232.101.2.2.4.3 |
cpqn52nnPortBondingEntryThe index into the table is cpqn52nnBondIndex. The table can be empty. Cpqn52nnPortBondingEntry .1.3.6.1.4.1.232.101.2.2.4.3.1 |
cpqn52nnBondIndexA simple index representing the entry number.ro INTEGER .1.3.6.1.4.1.232.101.2.2.4.3.1.1 |
cpqn52nnBondRowStatusDURABLE: The status of this row entry. Rows are added to this table
using 'row sets'. When a row is added, this object must be set to
row-valid(1). To delete a row from this table, set this object for the
row to row-invalid(2). This object will always read as row-valid(1).rw CpqnRowStatus .1.3.6.1.4.1.232.101.2.2.4.3.1.2 |
cpqn52nnBondMapDURABLE: A bitmap indicating the uplink ports that are bonded together.
The bits used to represent the uplink ports are the same as the If Index
representations of the ports. e.g. port 25
0x05000000, indicates that uplink ports 25 and 27 are bonded.rw INTEGER .1.3.6.1.4.1.232.101.2.2.4.3.1.3 |
cpqn52nnIfStatusInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.5 |
cpqn52nnIfStatusTableThis table defines certain switch interface level parameters for each
interface. SEQUENCE OF Cpqn52nnIfStatusEntry .1.3.6.1.4.1.232.101.2.2.5.1 |
cpqn52nnIfStatusEntryThis table has one entry for each switch interface. The index
into the table is cpqn52nnIfStatusIfIndex. Cpqn52nnIfStatusEntry .1.3.6.1.4.1.232.101.2.2.5.1.1 |
cpqn52nnIfStatusIfIndexThe value of the instance of the ifIndex object,
defined in MIB-II, for this switch interface.ro INTEGER .1.3.6.1.4.1.232.101.2.2.5.1.1.1 |
cpqn52nnIfStatusIfTypeThe type of device used for this switch interface.ro Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.2 |
cpqn52nnIfStpStatusWhen enabled(1), this interface will participate in
Spanning Tree activities. When disabled(2), this interface
will not participate in the Spanning Tree algorithm.
Default is enabled(1). DURABLE.rw Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.3 |
cpqn52nnIfResetStatusThis object will allow the user to physically reset an interface on
the CPQN52nn. The advantage over a general reset is that the other
interfaces are left unaffected in their operation. The agent will
always return interface-not-resetting(1) when the object is read.rw Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.4 |
cpqn52nnIfLearningStatusWhen enabled(1), this interface can enter the learning
state. When disabled(2), this interface is not allowed to
enter the learning state. When disabled(2), Spanning Tree
must be set to disabled. Default is enabled(1). DURABLE.rw Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.5 |
cpqn52nnIfAgingStatusWhen enabled(1), this interface ages learned entries in the
Address Filter/Forward table. When disabled(2), this interface
does not age entries in the address table.
Default is enabled(1). DURABLE.rw Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.6 |
cpqn52nnIfAgingTimeThe timeout period in seconds for aging out dynamically
learned forwarding information on the switch interface.
DURABLErw INTEGER .1.3.6.1.4.1.232.101.2.2.5.1.1.7 |
cpqn52nnIfSwitchModeSrcStatusThe switch mode for this interface when it is the Source
in a switch transfer.ro Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.8 |
cpqn52nnIfSwitchModeDestStatusThe switch mode for this interface when it is the Destination
in a switch transfer.ro Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.9 |
cpqn52nnIfSwitchModeSrcDURABLE: The switch mode for this interface when it is the Source
in a switch transfer. The default case is store-and-forward(1).rw Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.10 |
cpqn52nnIfSwitchModeDestDURABLE: The switch mode for this interface when it is the Destination
in a switch transfer. The default case is store-and-forward(1).rw Enumeration .1.3.6.1.4.1.232.101.2.2.5.1.1.11 |
cpqn52nnIfArbPriorityDURABLE: The priority mechanism used for arbitration. The possible
arbitration states and values are as follows:
VALUE ARBITRATION
-
0 First-Come-First-Served
all port same Round Robin (Fair)
all ports varied Round Robin (Weighted)
The final case implies that not all ports have the same priority in which
case a weighted Round Robin method of arbitration would be used. The default
case has all ports with a value of 0 (First-Come-First-Served).rw INTEGER .1.3.6.1.4.1.232.101.2.2.5.1.1.12 |
cpqn52nnIfStatsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.6 |
cpqn52nnQuadCascade OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.6.1 |
cpqn52nnQuadIfTableThis table provides information, on a per port basis, for the Quad
Cascade devices. SEQUENCE OF Cpqn52nnQuadIfEntry .1.3.6.1.4.1.232.101.2.2.6.1.1 |
cpqn52nnQuadIfEntryThis table has one entry for each Port. The indices
into the table are cpqn52nnQuadIfIndex. Cpqn52nnQuadIfEntry .1.3.6.1.4.1.232.101.2.2.6.1.1.1 |
cpqn52nnQuadIfIndexAn index representing the interface as in MIN-II.ro INTEGER .1.3.6.1.4.1.232.101.2.2.6.1.1.1.1 |
cpqn52nnQuadIfAlignFcsErrorsShows the number of packets received between 64 and 1518 bytes in
length, but were not an integral number of bytes in length, or had
a bad Frame Check Sequence.ro Counter .1.3.6.1.4.1.232.101.2.2.6.1.1.1.2 |
cpqn52nnQuadIfTxRuntsShows the number of packets transmitted that were less than 64 bytes
in length.ro Counter .1.3.6.1.4.1.232.101.2.2.6.1.1.1.3 |
cpqn52nnQuadIfRxRuntsShows the number of packets received that were less than 64 bytes
long that were an integral number of bytes long.ro Counter .1.3.6.1.4.1.232.101.2.2.6.1.1.1.4 |
cpqn52nnQuadIfTotalCollisionsShows the number of collision packets, single and multiple.ro Counter .1.3.6.1.4.1.232.101.2.2.6.1.1.1.5 |
cpqn52nnQuadIfCfgTableThis table provides information, on a per port basis, for the Quad
Cascade devices. SEQUENCE OF Cpqn52nnQuadIfCfgEntry .1.3.6.1.4.1.232.101.2.2.6.1.2 |
cpqn52nnQuadIfCfgEntryThis table has one entry for each Port. The index
into the table is cpqn52nnQuadIfIndex. Cpqn52nnQuadIfCfgEntry .1.3.6.1.4.1.232.101.2.2.6.1.2.1 |
cpqn52nnQuadIfCfgIndexAn index representing the interface as in MIN-II.ro INTEGER .1.3.6.1.4.1.232.101.2.2.6.1.2.1.1 |
cpqn52nnQuadIfCfgMauIndexro INTEGER .1.3.6.1.4.1.232.101.2.2.6.1.2.1.2 |
cpqn52nnQuadIfCfgLinkForceDURABLE: When enabled, this object allows the port to transmit
even if link integrity fails.rw Enumeration .1.3.6.1.4.1.232.101.2.2.6.1.2.1.3 |
cpqn52nnQuadIfCfgLinkPolarityCorrectDURABLE: When enabled, this allows the port to correct for inverted
polarity on the twisted pair interface, if an inverted polarity
condition exists on that port.rw Enumeration .1.3.6.1.4.1.232.101.2.2.6.1.2.1.4 |
cpqn52nnTlan OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.6.2 |
cpqn52nnTlanIfTableThis table provides information, on a per port basis, for the Tlan
devices. SEQUENCE OF Cpqn52nnTlanIfEntry .1.3.6.1.4.1.232.101.2.2.6.2.1 |
cpqn52nnTlanIfEntryThis table has one entry for each Port. The index
into the table is cpqn52nnTlanIfIndex. Cpqn52nnTlanIfEntry .1.3.6.1.4.1.232.101.2.2.6.2.1.1 |
cpqn52nnTlanIfIndexA simple index representing the Port in the table representing the
IfIndex in MIB-II.ro INTEGER .1.3.6.1.4.1.232.101.2.2.6.2.1.1.1 |
cpqn52nnTlanIfTxGoodFrmsShows the number of packets transmitted that were good (no errors).ro Counter .1.3.6.1.4.1.232.101.2.2.6.2.1.1.2 |
cpqn52nnTlanIfRxUndersizeFrmsShows the number of packets that werero Counter .1.3.6.1.4.1.232.101.2.2.6.2.1.1.3 |
cpqn52nnTlanIfRxOverrunsShows the number of packets received that werero Counter .1.3.6.1.4.1.232.101.2.2.6.2.1.1.4 |
cpqn52nnTlanIfRxAlignSymbolErrsShows the number of packets received that had either Alignment errors
or Symbol errors.ro Counter .1.3.6.1.4.1.232.101.2.2.6.2.1.1.5 |
cpqn52nnSwitchStatsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.7 |
cpqn52nnHashMemory OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.7.1 |
cpqn52nnHashStaticNumA count of static entries in this switch interface's
Address Forwarding/Filtering mechanism.ro INTEGER .1.3.6.1.4.1.232.101.2.2.7.1.1 |
cpqn52nnHashDynamicNumA count of dynamic entries in this switch interface's
Address Forwarding/Filtering mechanism.ro INTEGER .1.3.6.1.4.1.232.101.2.2.7.1.2 |
cpqn52nnHashChainNumA count of indices in the Address Filter/Forward
mechanism's hash table which have more than one
MAC Address entry.ro INTEGER .1.3.6.1.4.1.232.101.2.2.7.1.3 |
cpqn52nnHashChainLengthA count of the number of MAC Address entries
in the longest chain in the Address Filter/Forward
mechanism's hash table.ro INTEGER .1.3.6.1.4.1.232.101.2.2.7.1.4 |
cpqn52nnDropPkts OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.7.2 |
cpqn52nnDropsWholeMemoryCtrCounter to indicate the total number of packets dropped due to memory
overflow. This is exclusive of the other counters in this section.ro Counter .1.3.6.1.4.1.232.101.2.2.7.2.1 |
cpqn52nnDropsBcastMemoryCtrCounter to indicate the total number of packets dropped due to memory
overflow in the area handling Broadcast packets only. This is exclusive
of the other counters in this section.ro Counter .1.3.6.1.4.1.232.101.2.2.7.2.2 |
cpqn52nnDropsIfMemoryCtrCounter to indicate the total number of packets dropped due to memory
overflow in the area handling interface TX/RX packets only. This is
exclusive of the other counters in this section.ro Counter .1.3.6.1.4.1.232.101.2.2.7.2.3 |
cpqn52nnBusMonitorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.232.101.2.2.8 |
cpqn52nnBusMonTableThis table defines the unit's utilization information. SEQUENCE OF Cpqn52nnBusMonEntry .1.3.6.1.4.1.232.101.2.2.8.1 |
cpqn52nnBusMonEntryThis table has one entry for each bus component. The index
into the table is cpqn52nnBusMonIndex. Cpqn52nnBusMonEntry .1.3.6.1.4.1.232.101.2.2.8.1.1 |
cpqn52nnBusMonIndexA simple index representing the entry in the table.ro INTEGER .1.3.6.1.4.1.232.101.2.2.8.1.1.1 |
cpqn52nnBusMonRowStatusDURABLE: The status of this alarm entry.rw CpqnRowStatus .1.3.6.1.4.1.232.101.2.2.8.1.1.2 |
cpqn52nnBusMonBusTypeDURABLE: The type of bus to be monitored.rw Enumeration .1.3.6.1.4.1.232.101.2.2.8.1.1.3 |
cpqn52nnBusMonDataTypeDURABLE: The type of data to be monitored.rw Enumeration .1.3.6.1.4.1.232.101.2.2.8.1.1.4 |
cpqn52nnBusMonPktTypeDURABLE: The type of data to be monitored.rw Enumeration .1.3.6.1.4.1.232.101.2.2.8.1.1.5 |
cpqn52nnBusMonSwitchModeTypeDURABLE: The type of packets monitored for data.rw Enumeration .1.3.6.1.4.1.232.101.2.2.8.1.1.6 |
cpqn52nnBusMonCurrentUtilizationUtilization of the selected port calculated as a percentage of
the total bandwidth available for the bus.ro INTEGER .1.3.6.1.4.1.232.101.2.2.8.1.1.7 |
cpqn52nnBusMonPeakUtilizationUtilization of the selected port calculated as a percentage of
the total bandwidth available for the bus.ro INTEGER .1.3.6.1.4.1.232.101.2.2.8.1.1.8 |
cpqn52nnBusMonRisingThresholdDURABLE: If this threshold is exceeded, then the action listed in
ThresholdAction will take place. The value is a % utilzation.rw INTEGER .1.3.6.1.4.1.232.101.2.2.8.1.1.9 |
cpqn52nnBusMonFallingThresholdDURABLE: If this threshold is exceeded, then the action listed in
ThresholdAction will take place. The value is a % utilzation.rw INTEGER .1.3.6.1.4.1.232.101.2.2.8.1.1.10 |
cpqn52nnBusMonActionDURABLE: If this threshold is exceeded, then the action listed in
ThresholdAction will take place. The value is an absolute number in
bytes/sec.rw Enumeration .1.3.6.1.4.1.232.101.2.2.8.1.1.11 |
cpqn52nnBusMonTrapEnableDURABLE: Enable Trap Generation if threshold is exceeded.rw Enumeration .1.3.6.1.4.1.232.101.2.2.8.1.1.12 |