Home/Catalog/CPQKVM-MIB

CPQKVM-MIB

Detailed view of the defined objects, syntax rules, and hierarchical paths.

59
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

59 total
Object Name
cpqKvm
OBJECT IDENTIFIER
.1.3.6.1.4.1.232.160
RFC1155-SMI
Unknown
.1.3.6.1.4.1.232.160
cpqKvmProducts
OBJECT IDENTIFIER
.1.3.6.1.4.1.232.160.1
cpqKvmRebootStartedTrapThe console switch is in the process of rebooting. The name of the user who initiated the reboot is contained in cpqKvmTrapObjectUserName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.1
cpqKvmUserLoginTrapA user logged into the console switch. The name of the user who logged in is contained in cpqKvmTrapObjectUserName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.2
cpqKvmUserLogoutTrapA user logged out of the console switch. The name of the user who logged out is contained in cpqKvmTrapObjectUserName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.3
cpqKvmVideoSessionStartedTrapA video session has started. The name of the user who is connected to the session is contained in cpqKvmTrapObjectUserName. The session identifier is contained in cpqKvmTrapObjectSessionIdentifier.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.4
cpqKvmVideoSessionStoppedTrapA video session has stopped. The name of the user who was connected to the session is contained in cpqKvmTrapObjectUserName. The session identifier is contained in cpqKvmTrapObjectSessionIdentifier.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.5
cpqKvmVideoSessionTerminatedTrapA video session has been terminated by another user. The name of the user who terminated the session is contained in cpqKvmTrapObjectUserName. The name of the user who was terminated from the session is contained in cpqKvmTrapObjectTargetUserName. The session identifier is contained in cpqKvmTrapObjectSessionIdentifier.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.6
cpqKvmLocalPortViewingStartedTrapA user on the local port has started viewing a server. The session identifier is contained in cpqKvmTrapObjectSessionIdentifier.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.7
cpqKvmLocalPortViewingStoppedTrapA user on the local port has stopped viewing a server. The session identifier is contained in cpqKvmTrapObjectSessionIdentifier.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.8
cpqKvmImageUpgradeStartedThe console switch has started a TFTP upgrade of an image. The name of the user who initiated the TFTP image upgrade is contained in cpqKvmTrapObjectUserName. The type of image that is being upgraded is contained in cpqKvmTrapObjectImageType. The version of the image that the console switch is upgrading to is contained in cpqKvmTrapObjectImageNewVersion. The version of the image that the console switch is currently running is contained in cpqKvmTrapObjectImageCurrentVersion.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.9
cpqKvmImageUpgradeResultsTrapThe results of a TFTP image upgrade.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.10
cpqKvmUserAddedTrapA new user has been added to the local user database. The name of the user who added the new user is contained in cpqKvmTrapObjectUserName. The name of the new user is contained in cpqKvmTrapObjectTargetUserName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.11
cpqKvmUserDeletedTrapA user has been deleted from the local user database. The name of the user who deleted the user is contained in cpqKvmTrapObjectUserName. The name of the user who was deleted is contained in cpqKvmTrapObjectTargetUserName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.12
cpqKvmUserModifiedTrapA user was modified. The name of the user who modified the user is contain in cpqKvmTrapObjectUserName. The name of the user who was modified is contained in cpqKvmTrapObjectTargetUserName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.13
cpqKvmUserAuthenticationFailureTrapA user failed to authenticate with the console switch. The name of the user who failed to authenticate is contained in cpqKvmTrapObjectUserName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.14
cpqKvmIaAddedTrapAn interface adapter was added. The ID of the interface adapter which was added is contained in cpqKvmTrapObjectIaId.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.15
cpqKvmIaRemovedTrapAn interface adapter was removed. The ID of the interface adapter which was removed is contained in cpqKvmTrapObjectIaId.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.16
cpqKvmServerNameChangedTrapThe name of a server has changed. The previous name of the server is contained in cpqKvmTrapObjectOldServerName. The new name of the server is contained in cpqKvmTrapObjectServerName. The ID of the interface adapter the server is attached to is contained in cpqKvmTrapObjectIaId,
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.17
cpqKvmCascadeSwitchAddedTrapA cascade switch was added. The name of the switch which was added is contained in cpqKvmTrapObjectCascadeSwitchName. The ID of the interface adapter the switch was added to is contained in cpqKvmTrapObjectIaId.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.18
cpqKvmCascadeSwitchRemovedTrapA cascade switch was removed. The name of the switch which was removed is contained in cpqKvmTrapObjectCascadeSwitchName. The ID of the interface adapter the switch was attached to is contained in cpqKvmTrapObjectIaId.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.19
cpqKvmCascadeSwitchNameChangedTrapThe name of a cascade switch has changed. The previous name of the cascade switch is contained in cpqKvmTrapObjectOldCascadeSwitchName. The new name of the cascade switch is contained in cpqKvmTrapObjectCascadeSwitchName. The ID of the interface adapter the switch is attached to is contained in cpqKvmTrapObjectIaId.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.20
cpqKvmConfigurationFileLoadedTrapThe console switch has loaded a configuration file. The name of the user who commanded the console switch to load the configuration file is contained in cpqKvmTrapObjectUserName. The name of the file that was loaded is contained in cpqKvmTrapObjectFileName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.21
cpqKvmUserDatabaseFileLoadedTrapThe console switch has loaded a user database file. The name of the user who commanded the console switch to load the user database file is contained in cpqKvmTrapObjectUserName. The name of the file that was loaded is contained in cpqKvmTrapObjectFileName.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.22
cpqKvmInvalidHookupDetectedTrapThe console switch has detected an invalid connection. This can include two interface adapters on a port where one or more have a cascade switch, or some other illegal setup condition. Information about the nature of the failure is stored in the cpqKvmTrapObjectFirmwareCondition object.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.23
cpqKvmSubsystemUpgradeStartedTrapThe console switch has started a Subsystem Upgrade. This can be a download from the DModule to the Main Board, or a interface adapter or other subsystem download from the Main Board... Information about the subsystem being updated is stored in the cpqKvmTrapObjectFirmwareCondition object.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.24
cpqKvmSubsystemRestartTrapThe console switch has completed a download and is restarting the subsystem specified in the cpqKvmTrapObjectFirmwareCondition object.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.25
cpqKvmFirmwareCommunicationsTrapThe console switch has detected communication problems in the system configuration. This can be used to indicate install problems that might result in perceived problems with the switch.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.26
cpqKvmNVMemoryFailureTrapThe console switch has detected a memory problem, the nature of which has been described in the cpqKvmTrapObjectFirmwareCondition object.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.27
cpqKvmWatchdogResetTrapThe console switch has detected a watchdog reset condition. This indicates a catastrophic failure in the Firmware/Hardware preventing normal operation of the console switch.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.28
cpqKvmDiagnosticConditionTrapThe console switch has detected a special condition to be trapped for diagnostics. The condition has been recorded is stored in the cpqKvmTrapObjectFirmwareCondition object.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.29
cpqKvmSubsystemUpgradeFailureTrapThe console switch has detected a special condition resulting in a failed subsystem update. The condition has been recorded is stored in the cpqKvmTrapObjectFirmwareCondition object.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.30
cpqKvmWarningConditionTrap}
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.31
cpqKvmUrgentConditionTrap}
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.32
cpqKvmUserLockedTrapA user account has been locked. The IP address of the client is contained in cpqKvmTrapObjectIPAddress. The name of the user who was locked is contained in cpqKvmTrapObjectTargetUserName. The reason for which the user account has been locked is contained in cpqKvmTrapObjectLockReason.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.33
cpqKvmUserUnlockedTrapA user account has been unlocked. The IP address of the client that originated the unlock request is contained in cpqKvmTrapObjectIPAddress. When the user account is unlocked by an appliance reboot or by the expiration of the lockout period (as specified in the cpqKvmTrapObjectUnlockReason object), the IP address will be blank. The name of the user who unlocked the user is contained in cpqKvmTrapObjectUserName. When the user account is unlocked by an appliance reboot or by the expiration of the lockout period (as specified in the cpqKvmTrapObjectUnlockReason object), the name of the user will be blank. The name of the user who was unlocked is contained in cpqKvmTrapObjectTargetUserName. The reason for which the user account has been unlocked is contained in cpqKvmTrapObjectUnlockReason.
TRAP-TYPE
.1.3.6.1.4.1.232.160.1.0.34
cpqKvmManagement
OBJECT IDENTIFIER
.1.3.6.1.4.1.232.160.2
cpqKvmTrapObject
OBJECT IDENTIFIER
.1.3.6.1.4.1.232.160.2.6
cpqKvmTrapObjectUserNameThis object is sent in a trap to identify the name of the user for which the trap condition occurred. If the trap condition occurred as a result of activity on the local port (OSD), then the value of this object will be the following string: local port
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.1
cpqKvmTrapObjectTargetUserNameThis object is sent in a trap to identify the name of the target user for which a trap condition occurred.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.2
cpqKvmTrapObjectImageTypeThis object is sent in a trap to identify the type of software image for which the trap condition occurred.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.3
cpqKvmTrapObjectImageNewVersionThis object is sent in a trap to identify the version of the new software image the console switch is being upgraded to.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.4
cpqKvmTrapObjectImageCurrentVersionThis object is sent in a trap to identify the version of the software image that the console switch is currently running.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.5
cpqKvmTrapObjectImageUpgradeResultsThis object is sent in a trap to report the results of a TFTP image upgrade.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.6
cpqKvmTrapObjectSessionIdentifierThis object is sent in a trap to identify the session for which the trap condition occurred. The value will be the name of a server if the server name is known, otherwise the value will be the connection path to a server. If the value is a connection path it will have the following format: IA i:Channel c Where i is the ID of the interface adapter, and c is the cascade switch channel number (0 if there is no switch in the path).
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.7
cpqKvmTrapObjectIaIdThis object is sent in a trap to identify the interface adapter for which the trap condition occurred.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.8
cpqKvmTrapObjectCascadeSwitchNameThis object is sent in a trap to identify the cascade switch for which the trap condition occurred.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.9
cpqKvmTrapObjectOldCascadeSwitchNameThis object is sent in a trap to identify the old name of a cascade switch whose name was changed.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.10
cpqKvmTrapObjectServerNameThis object is sent in a trap to identify the server for which the trap condition occurred.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.11
cpqKvmTrapObjectOldServerNameThis object is sent in a trap to identify the old name of a server whose name was changed.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.12
cpqKvmTrapObjectFileNameThis object is sent in a trap to identify the name of a file for which the trap condition occurred.
DisplayString ( SIZE
.1.3.6.1.4.1.232.160.2.6.13
cpqKvmTrapObjectFirmwareConditionThis trap message will contain data for application specific diagnostics. It is designed in provision for diagnostic help for installation-specific problems, would require the operator to install firmware provided to isolate their particular problems and to enable the trap to report conditions. The contents will be an Application Message Packet with the address, size, and command header removed. The parameters of the message will depend on the specific problem the firmware is designed to detect and report.
OCTET STRING ( SIZE
.1.3.6.1.4.1.232.160.2.6.14
cpqKvmTrapObjectDeviceIdThis object is sent in a trap to identify the device for which the trap condition occurred.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.15
cpqKvmTrapObjectAlarmConditionThis object is sent in a trap to identify Warning/Alarm activity for the device on which the trap condition occurred. Alarm sets the alarm, OK indicates the condition has cleared up.
Enumeration
.1.3.6.1.4.1.232.160.2.6.16
cpqKvmTrapObjectAlarmDescriptionThis object is sent in a trap to explain the Warning/Alarm condition for which the trap condition occurred. This is intended for display or logging.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.17
cpqKvmTrapObjectLockReasonThis object is sent in a trap to explain the reason for which a user account has been locked.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.18
cpqKvmTrapObjectUnlockReasonThis object is sent in a trap to explain the reason for which a user account has been unlocked.
UTF8String ( SIZE
.1.3.6.1.4.1.232.160.2.6.19
cpqKvmTrapObjectIPAddressThis object is sent in a trap to identify the IP address for which a trap condition occurred.
DisplayString( SIZE
.1.3.6.1.4.1.232.160.2.6.20
CPQKVM-MIB - SNMP MIB Reference | MIBs Explorer