CPQAPPG80-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CPQAPPG80-MIB.
169
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
169 total| Object Name |
|---|
compaq OBJECT IDENTIFIER .1.3.6.1.4.1.232 |
RFC1213-MIB Unknown .1.3.6.1.4.1.232 |
cpqSanAppliance OBJECT IDENTIFIER .1.3.6.1.4.1.232.151 |
cpqsmav1 OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100 |
cpqSMAAgent OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.1 |
cpqSMAAgentVersionMajorThe version of the agentro INTEGER .1.3.6.1.4.1.232.151.100.1.1 |
cpqSMAAgentVersionMinorThe version of the agentro INTEGER .1.3.6.1.4.1.232.151.100.1.2 |
cpqSMAAgentActiveThe state of the agentro Enumeration .1.3.6.1.4.1.232.151.100.1.3 |
cpqSMAAgentRefreshTimeThe time interval before the next data collection.
The information about the HSG80 is collected periodically.
A thread gathers the information and stores it in
memory. This variable is used to specify the time interval
in minutes (MINUTES) between each update.rw INTEGER .1.3.6.1.4.1.232.151.100.1.4 |
cpqSMAAgentHostNameThe name of the local machine where the agent is running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.1.5 |
cpqSMASubsystem OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.2 |
cpqSMASubsystemTableThe table of Subsystems SEQUENCE OF cpqSMASubsystemEntry .1.3.6.1.4.1.232.151.100.2.1 |
cpqSMASubsystemEntryA table entry for a Subsystem cpqSMASubsystemEntry .1.3.6.1.4.1.232.151.100.2.1.1 |
cpqSMASubsystemIndexThe Subsystem indexro INTEGER .1.3.6.1.4.1.232.151.100.2.1.1.1 |
cpqSMASubsystemNameThe name of the Subsystem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.2.1.1.2 |
cpqSMASubsystemControllerOneThe index of controller one thats belongs to this subsytem.
If the value is -1 then either the controller is not installed
or not operational.ro INTEGER .1.3.6.1.4.1.232.151.100.2.1.1.3 |
cpqSMASubsystemControllerTwoThe index of controller two thats belongs to this subsytem.
If the value is -1 then either the controller is not installed
or not operational.ro INTEGER .1.3.6.1.4.1.232.151.100.2.1.1.4 |
cpqSMASubsystemEMUStateSubsystem Environmental Monitoring Unit (EMU) State.
nooper(1) - EMU is either not installed or not operational.
oper(2) - EMU is operational.ro Enumeration .1.3.6.1.4.1.232.151.100.2.1.1.5 |
cpqSMASubsystemEMUVersionSubsystem Environmental Monitoring Unit (EMU) Microcode verion.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.2.1.1.6 |
cpqSMASubsystemEMUSensor1Subsystem Environmental Monitoring Unit (EMU) Sensor1 value (in Celsius).
Sensor1 sets the maximum operating temperature for
the primary subsystem cabinet.ro INTEGER .1.3.6.1.4.1.232.151.100.2.1.1.7 |
cpqSMASubsystemEMUSensor2Subsystem Environmental Monitoring Unit (EMU) Sensor2 value (in Celsius).
Sensor2 also sets the maximum operating temperature for
the primary subsystem cabinet.ro INTEGER .1.3.6.1.4.1.232.151.100.2.1.1.8 |
cpqSMASubsystemEMUSensor3Subsystem Environmental Monitoring Unit (EMU) Sensor3 value (in Celsius).
Sensor3 sets the maximum operating temperature for
the EMU unit.ro INTEGER .1.3.6.1.4.1.232.151.100.2.1.1.9 |
cpqSMASubsystemEMUFanspeedSubsystem Fanspeed.
FANSPEED=HIGH forces the fans in all connected cabinets to operate at
high speed continuously.
FANSPEED=AUTOMATIC allows the EMU to control the fan speed for
the fans in all connected cabinets.
The EMU instructs the fans to operate at high speed when any of the temperature
setpoints are exceeded or when one or more fans are not functioning.ro Enumeration .1.3.6.1.4.1.232.151.100.2.1.1.10 |
cpqSMASubsystemEMUAlarmSubsystem Environmental Monitoring Unit Alarm.
Determines whether or not the audible alarm of the EMU will
sound in the following cases:
drive failure
controller restart
The EMU alarm will still sound in the event of an adverse
environmental condition, such as a power failure or an over-temperature condition.ro Enumeration .1.3.6.1.4.1.232.151.100.2.1.1.11 |
cpqSMASubsystemStateGives us the overall state of the HSG80 subsystem.ro Enumeration .1.3.6.1.4.1.232.151.100.2.1.1.12 |
cpqSMASubsystemAliasThe Subsystem Alias.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.2.1.1.13 |
cpqSMAController OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.3 |
cpqSMAControllerTableThe table of controllers SEQUENCE OF cpqSMAControllerEntry .1.3.6.1.4.1.232.151.100.3.1 |
cpqSMAControllerEntryA table entry for a controller cpqSMAControllerEntry .1.3.6.1.4.1.232.151.100.3.1.1 |
cpqSMAControllerIndexThe controller indexro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.1 |
cpqSMAControllerNameThe name of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.2 |
cpqSMAControllerSerialNumberThe serial number of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.3 |
cpqSMAControllerFirmwareThe firmware of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.4 |
cpqSMAControllerHardwareThe hardware revision of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.5 |
cpqSMAControllerNodeIDManufacturer assigned ID of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.6 |
cpqSMAControllerIdentifierThe user assigned identifier if any of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.7 |
cpqSMAControllerAllocationClassThe controller allocation classro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.8 |
cpqSMAControllerScsiVersionThe scsi version of the controllerro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.9 |
cpqSMAControllerRedundancyThe redundancy type of the controllerro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.10 |
cpqSMAControllerScsiIDThe device port scsi address of the controllerro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.11 |
cpqSMAControllerCacheSizeThe cache size in megabytes.
Can be either 64, 128, 256 or 512 MB.ro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.12 |
cpqSMAControllerCacheTypeThe cache type of this controllerro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.13 |
cpqSMAControllerCacheVersionThe version of this controllers cache.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.14 |
cpqSMAControllerCacheFlushTimerThe cache flush timer in secro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.15 |
cpqSMAControllerMirrorCacheThe mirror cache state of this controllerro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.16 |
cpqSMAControllerPort_1_IDThe ID of port 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.17 |
cpqSMAControllerPort_1_TopologyThe topology of this controllerro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.18 |
cpqSMAControllerPort_1_StateThe state of this portro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.19 |
cpqSMAControllerPort_2_IDThe ID of port 2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.20 |
cpqSMAControllerPort_2_TopologyThe topology of this controllerro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.21 |
cpqSMAControllerPort_2_StateThe state of this portro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.22 |
cpqSMAControllerPairIndexThe index of this controller's pair if
FAILOVER mode (cpqSMAControllerRedundancy)
is mutlibus or transparent.
If there is no FAILOVER mode (cpqSMAControllerRedundancy
is single or unknown) then the value is -1.ro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.23 |
cpqSMAControllerCacheStateThe state of the controller cache.ro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.24 |
cpqSMAControllerBatteryCheckStateBattery check state.
Specifies whether the controller should perform regular battery condition checks.
If CACHE_UPS (ups) the controller does not check the condition of the cache batteries
and ignores the battery's state.
If NOCACHE_UPS (noups) the controller performs regular cache battery checks and evaluates
the condition of the cache batteries.ro Enumeration .1.3.6.1.4.1.232.151.100.3.1.1.25 |
cpqSMAControllerBatteryChargeStateThis is the value in % (percentage) of the amount the
controller battery is charged.
A value of 0 (zero) means DANGER: BATTERY LIFETIME HAS EXPIRED, REPLACE BATTERY NOW!.ro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.26 |
cpqSMAControllerBatteryExpiryDateThe expiry date of the controller battery.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.27 |
cpqSMAControllerSubsystemIndexThe index of the subsystem to which this
controller belongs.ro INTEGER .1.3.6.1.4.1.232.151.100.3.1.1.28 |
cpqSMAControllerPort_1_AddressThe Host_Port1 Address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.29 |
cpqSMAControllerPort_2_AddressThe Host_Port2 Address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.30 |
cpqSMAControllerLogicalDiskIndexesThe indexes of all the logical disks associated with the controller.
Each index is seperated by a ':' .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.31 |
cpqSMAControllerSnapshotIndexesThe indexes of all the snapshots associated with the controller.
Each index is seperated by a ':' .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.3.1.1.32 |
cpqSMALogicalDisk OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.4 |
cpqSMALogicalDiskTableThe table of LogicalDisks SEQUENCE OF cpqSMALogicalDiskEntry .1.3.6.1.4.1.232.151.100.4.1 |
cpqSMALogicalDiskEntryA table entry for a LogicalDisk cpqSMALogicalDiskEntry .1.3.6.1.4.1.232.151.100.4.1.1 |
cpqSMALogicalDiskIndexThe LogicalDisk index.
This is just a ordered sequence done by the agent,
has no relationship to the unit offset or unit name/number.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.1 |
cpqSMALogicalDiskNameThe name of the LogicalDisk.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.4.1.1.2 |
cpqSMALogicalDiskSizeLogical Drive Size.
This is the size of the logical drive in blocks. One block
equals 512 bytes (1 block = 512 bytes).ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.3 |
cpqSMALogicalDiskCreatedFromIndexLogical Drive Created From Instance.
This gives us the instance of the storageset or physical disk
from which this LUN was created.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.4 |
cpqSMALogicalDiskReadCacheLogical Drive Read Cache.
The state of the read cache for the associated logical drives.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.5 |
cpqSMALogicalDiskWriteBackCacheLogical Drive WriteBack Cache.
The state of the writeback cache for the associated logical drives.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.6 |
cpqSMALogicalDiskWriteProtectCacheLogical Drive WriteProtect Cache.
The state of the write protect cache for the associated logical drives.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.7 |
cpqSMALogicalDiskReadAheadCacheLogical Drive ReadAhead Cache.
The state of the readahead cache for the associated logical drives.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.8 |
cpqSMALogicalDiskRunStateLogical Drive Run State.
The run state for the associated logical drives. you specify RUN
to make a unit available to the host.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.9 |
cpqSMALogicalDiskStateLogical Drive State.
The state of the associated logical drive.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.10 |
cpqSMALogicalDiskCachedTransferSizeLogical Drive CachedTransferSize.
The largest number of write blocks to be cached by the
controller. The controller will not cache any transfers over
the specified size.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.11 |
cpqSMALogicalDiskPreferredPathLogical Drive PreferredPath.
May be set only when dual redundant controllers are operating in a
multiple-bus failover configuration.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.12 |
cpqSMALogicalDiskHostAccessLogical Drive Host Access.
Specifies the access path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.4.1.1.13 |
cpqSMALogicalDiskIdentifierLogical Drive ID (Lun_ID)
This ID consists of the controller node ID plus a 64-bit unit ID
generated by the subsystem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.4.1.1.14 |
cpqSMALogicalDiskHeadsNumber of Heads.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.15 |
cpqSMALogicalDiskCylindersNumber of Cylinders.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.16 |
cpqSMALogicalDiskSectorsNumber of Sectors.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.17 |
cpqSMALogicalDiskControllerInstanceLogical Drive Controller Instance.
This gives us the instance of the controller to which this LUN is online.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.18 |
cpqSMALogicalDiskCreatedFromTypeLogical Drive Created from type.
Tells us whether the LUN was created from an entire physical disk, entire storageset
or from a partition(logical or physical). cpqSMALogicalDiskCreatedFromIndex gives us
the instance of the object.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.19 |
cpqSMALogicalDiskIdentifierSwitchLogical Drive Identifier switch.
This is used with the SCSI_VERSION switch when the SCSI version
is set to SCSI-3 mode. The IDENTIFIER switch creates a unique
unit identifier makes the unit visible to the host.This number can
be a value between 1-9999. The value 0 means NOIDENTIFIER.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.20 |
cpqSMALogicalDiskSnappedLogical Drive Snapped.
This tells us if a snapshot of this disk
exists.ro Enumeration .1.3.6.1.4.1.232.151.100.4.1.1.21 |
cpqSMALogicalDiskSnapshotInstanceLogical Drive Snapshot instance.
If the disk has a snapshot ie. cpqSMALogicalDiskSnapped is yes,
then this gives us the instance of the snapshot else -1.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.22 |
cpqSMALogicalDiskSubsystemIndexThe index of the subsystem where this logical
disk resides.ro INTEGER .1.3.6.1.4.1.232.151.100.4.1.1.23 |
cpqSMAPhysicalDisk OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.5 |
cpqSMAPhysicalDiskTableThe table of PhysicalDisks SEQUENCE OF cpqSMAPhysicalDiskEntry .1.3.6.1.4.1.232.151.100.5.1 |
cpqSMAPhysicalDiskEntryA table entry for a PhysicalDisk cpqSMAPhysicalDiskEntry .1.3.6.1.4.1.232.151.100.5.1.1 |
cpqSMAPhysicalDiskIndexThe PhysicalDisk indexro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.1 |
cpqSMAPhysicalDiskNameThe name of the PhysicalDisk.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.5.1.1.2 |
cpqSMAPhysicalDiskModelThe model of the PhysicalDisk.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.5.1.1.3 |
cpqSMAPhysicalDiskPortThe PhysicalDisk Portro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.4 |
cpqSMAPhysicalDiskTargetThe PhysicalDisk targetro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.5 |
cpqSMAPhysicalDiskLunThe PhysicalDisk LUNro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.6 |
cpqSMAPhysicalDiskSizePhysical Disk Size.
This is the size of the physical disk in megabytes. This value
is calculated using the value 1,048,576 (2^20) as a megabyte.
Drive manufacturers sometimes use the number 1,000,000 as a
megabyte when giving drive capacities so this value may
differ from the advertised size of a drive.ro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.7 |
cpqSMAPhysicalDiskTransportablePhysicalDisk Transportable.
Indicates whether a disk drive can be accessed exclusively by StorageWorks.ro Enumeration .1.3.6.1.4.1.232.151.100.5.1.1.8 |
cpqSMAPhysicalDiskTransferRatePhysicalDisk Transportable.
Indicates whether a disk drive can be accessed exclusively by StorageWorks.ro Enumeration .1.3.6.1.4.1.232.151.100.5.1.1.9 |
cpqSMAPhysicalDiskStatePhysicalDisk State.
Indicates whether a disk drive has been assigend to a storageset, lun or not.ro Enumeration .1.3.6.1.4.1.232.151.100.5.1.1.10 |
cpqSMAPhysicalDiskUsedByIndexPhysicalDisk Used by index.
This is the index of the lun or storageset that was created by using this physical disk.
If the disk is unassigned or free ie. cpqSMAPhysicalDiskState = 1 then the index
is of the this controller.ro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.11 |
cpqSMAPhysicalDiskNoofPartitionsThe number of partitions on this PhysicalDisk.ro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.12 |
cpqSMAPhysicalDiskUsedByTypePhysicalDisk UsedByType.
If this disk has been assigned ie. cpqSMAPhysicalDiskState = 2, then this indicates
the type of object that was created using this disk ie. whether it is a storageset or
a lun and cpqSMAPhysicalDiskUsedByIndex gives you the instance of that object.ro Enumeration .1.3.6.1.4.1.232.151.100.5.1.1.13 |
cpqSMAPhysicalDiskSubsystemIndexThe index of the subsystem where this physical
disk resides.ro INTEGER .1.3.6.1.4.1.232.151.100.5.1.1.14 |
cpqSMAStorageSet OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.6 |
cpqSMAStorageSetTableThe table of StorageSets SEQUENCE OF cpqSMAStorageSetEntry .1.3.6.1.4.1.232.151.100.6.1 |
cpqSMAStorageSetEntryA table entry for a StorageSet cpqSMAStorageSetEntry .1.3.6.1.4.1.232.151.100.6.1.1 |
cpqSMAStorageSetIndexThe StorageSet indexro INTEGER .1.3.6.1.4.1.232.151.100.6.1.1.1 |
cpqSMAStorageSetNameThe name of the StorageSet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.6.1.1.2 |
cpqSMAStorageSetRaidTypeThe StorageSet Raid Typero Enumeration .1.3.6.1.4.1.232.151.100.6.1.1.3 |
cpqSMAStorageSetSizeStorageset Size.
This is the size of the storagset disk in megabytes. This value
is calculated using the value 1,048,576 (2^20) as a megabyte.
Drive manufacturers sometimes use the number 1,000,000 as a
megabyte when giving drive capacities so this value may
differ from the advertised size of a drive.ro INTEGER .1.3.6.1.4.1.232.151.100.6.1.1.4 |
cpqSMAStorageSetPolicyThe StorageSet Policy switch.
Sets the selection criteria the contoller uses to choose a replacement
disk from the spareset. This policy only pertains to MIRRORSETs
and RAIDSETs.
For the other types it will be set to unknown.ro Enumeration .1.3.6.1.4.1.232.151.100.6.1.1.5 |
cpqSMAStorageSetReconstructThe StorageSet Reconstruct switch.
Sets the speed at which the contoller reconstructs data ti a new RAIDset
disk that replaces the failed disk. This policy only pertains to RAIDSETs.
For the other types it will be set to unknown.ro Enumeration .1.3.6.1.4.1.232.151.100.6.1.1.6 |
cpqSMAStorageSetCopyThe StorageSet Copy switch.
Sets the speed at which the controller copies data to a new member from
normal mirrorset members when data is being mirrored to the storageset's
disk drives. This policy only pertains to MIRRORSETs.
For the other types it will be set to unknown.ro Enumeration .1.3.6.1.4.1.232.151.100.6.1.1.7 |
cpqSMAStorageSetReadSourceThe Storageset ReadSource switch.
Selects the mirrorset member used by the controller to satisfy a read
request. The values will be either
- disk-name (name of the specific member to which you want the controller
to direct all read requests)
- least_busy
- round_robin
This policy only pertains to MIRRORSETs.
For the other types it will be set to unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.6.1.1.8 |
cpqSMAStorageSetAutospareThe StorageSet Autospare switch.
With autospare enabled on a failedset, any new disk drive that is inserted
into the PTL location of a failed dusk drive is automatically initialized and
placed into the spareset. This policy only pertains to FAILEDSET.
For the other types it will be set to unknown.ro Enumeration .1.3.6.1.4.1.232.151.100.6.1.1.9 |
cpqSMAStorageSetChunkSizeThe StorageSet ChunkSize switch.
Specify a chunk size to control the stripesize used for RAIDsets
and stripesets in blocks. This policy only pertains to RAIDSETs and
STRIPESETs.
For the other types it will be set to zero.ro INTEGER .1.3.6.1.4.1.232.151.100.6.1.1.10 |
cpqSMAStorageSetNoOfDisksThe number of the physical disks that was used to create this StorageSet.ro INTEGER .1.3.6.1.4.1.232.151.100.6.1.1.11 |
cpqSMAStorageSetDisksIndexThe indexes of the physical disks from which this StorageSet was created.
Each index is seperated by a ':' .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.6.1.1.12 |
cpqSMAStorageSetStateStorageset State.
Indicates whether a lun has been created from the storageset.ro Enumeration .1.3.6.1.4.1.232.151.100.6.1.1.13 |
cpqSMAStorageSetUsedByIndexStorageset Used by index.
This is the index of the lun or snapshot that was created from this storageset.
If the storageset is unassigned or free ie. cpqSMAStorageSetState = 1 then the index
is of the this controller.
If the storageset has multiple (>1) partitions then the value is -1.ro INTEGER .1.3.6.1.4.1.232.151.100.6.1.1.14 |
cpqSMAStorageSetNoofPartitionsThe number of partitions on this Storageset.ro INTEGER .1.3.6.1.4.1.232.151.100.6.1.1.15 |
cpqSMAStorageSetSubsystemIndexThe index of the subsystem where this storageset resides.ro INTEGER .1.3.6.1.4.1.232.151.100.6.1.1.16 |
cpqSMAStorageSetUsedByTypeStorageset Used by index.
This tells us whether the type of disk created from this storageset is a lun
or a snapshot. ie. if cpqSMAStorageSetState = 2 (assigned) then this
tells you the type (lun or snapshot) and cpqSMAStorageSetUsedByIndex gives
the index of that object.ro Enumeration .1.3.6.1.4.1.232.151.100.6.1.1.17 |
cpqSMAPartition OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.7 |
cpqSMAPartitionTableThe table of Partitions SEQUENCE OF cpqSMAPartitionEntry .1.3.6.1.4.1.232.151.100.7.1 |
cpqSMAPartitionEntryA table entry for a Partition cpqSMAPartitionEntry .1.3.6.1.4.1.232.151.100.7.1.1 |
cpqSMAPartitionIndexThe Partition indexro INTEGER .1.3.6.1.4.1.232.151.100.7.1.1.1 |
cpqSMAPartitionNameThe name of the Partition.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.7.1.1.2 |
cpqSMAPartitionNumberThe Partition numberro INTEGER .1.3.6.1.4.1.232.151.100.7.1.1.3 |
cpqSMAPartitionDeviceIndexThe Partition Device Index.
This is the index of the device (physical) or storageset (logical)
from which this partition was created.ro INTEGER .1.3.6.1.4.1.232.151.100.7.1.1.4 |
cpqSMAPartitionStateThe Partition numberro Enumeration .1.3.6.1.4.1.232.151.100.7.1.1.5 |
cpqSMAPartitionUsedByIndexThe Partition Used By Index.
This is the index of the lun that was created from this partition. If the parition
is unassigned or free ie. cpqSMAPartitionDeviceState = 1 then the index
is of the this controller.ro INTEGER .1.3.6.1.4.1.232.151.100.7.1.1.6 |
cpqSMAPartitionSizePartition Size.
This is the size of the partition in megabytes. This value
is calculated using the value 1,048,576 (2^20) as a megabyte.
Drive manufacturers sometimes use the number 1,000,000 as a
megabyte when giving drive capacities so this value may
differ from the advertised size of a drive.ro INTEGER .1.3.6.1.4.1.232.151.100.7.1.1.7 |
cpqSMAPartitionTypeThe type of Partition.
If its a partition created from a device(disk) its a physical partition
if its created from a storageset then its a logical partition.ro Enumeration .1.3.6.1.4.1.232.151.100.7.1.1.8 |
cpqSMAPartitionSubsystemIndexThe index of the subsystem where this partition resides.ro INTEGER .1.3.6.1.4.1.232.151.100.7.1.1.9 |
cpqSMAConnection OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.8 |
cpqSMAConnectionTableThe table of Connections SEQUENCE OF cpqSMAConnectionEntry .1.3.6.1.4.1.232.151.100.8.1 |
cpqSMAConnectionEntryA table entry for a Connection cpqSMAConnectionEntry .1.3.6.1.4.1.232.151.100.8.1.1 |
cpqSMAConnectionIndexThe Connection indexro INTEGER .1.3.6.1.4.1.232.151.100.8.1.1.1 |
cpqSMAConnectionNameThe name of the Connection.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.8.1.1.2 |
cpqSMAConnectionOSNameThe Operating System name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.8.1.1.3 |
cpqSMAConnectionControllerThe instance of the controller to which there is a connection.ro INTEGER .1.3.6.1.4.1.232.151.100.8.1.1.4 |
cpqSMAConnectionControllerPortNumberThe port number on the controller to which there is a connection.ro INTEGER .1.3.6.1.4.1.232.151.100.8.1.1.5 |
cpqSMAConnectionStatusThe status of connection.ro Enumeration .1.3.6.1.4.1.232.151.100.8.1.1.6 |
cpqSMAConnectionOnlineToThe instance of the controller to which it is online.ro INTEGER .1.3.6.1.4.1.232.151.100.8.1.1.7 |
cpqSMAConnectionLunOffsetThe LUN offset for this connection.ro INTEGER .1.3.6.1.4.1.232.151.100.8.1.1.8 |
cpqSMAConnectionHostIDThe HOST ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.8.1.1.9 |
cpqSMAConnectionAdapterIDThe Adapter ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.8.1.1.10 |
cpqSMAConnectionUnitAddressThe Unit Address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.8.1.1.11 |
cpqSMAConnectionSubsystemIndexThe index of the subsystem where this connection exists.ro INTEGER .1.3.6.1.4.1.232.151.100.8.1.1.12 |
cpqSMASnapshot OBJECT IDENTIFIER .1.3.6.1.4.1.232.151.100.9 |
cpqSMASnapshotTableThe table of Snapshots SEQUENCE OF cpqSMASnapshotEntry .1.3.6.1.4.1.232.151.100.9.1 |
cpqSMASnapshotEntryA table entry for a Snapshot cpqSMASnapshotEntry .1.3.6.1.4.1.232.151.100.9.1.1 |
cpqSMASnapshotIndexThe Snapshot indexro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.1 |
cpqSMASnapshotNameThe name of the Snapshot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.9.1.1.2 |
cpqSMASnapshotSizeSnapshot Drive Size.
This is the size of the snapshot in blocks. One block
equals 512 bytes (1 block = 512 bytes).ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.3 |
cpqSMASnapshotCreatedFromIndexSnapshot Created From Instance.
This gives us the instance of the storageset
from which this snapshot was created.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.4 |
cpqSMASnapshotOfThis is the instance of the logical disk for which this is a snapshot.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.5 |
cpqSMASnapshotStateSnapshot State.
The state of the snapshot.ro Enumeration .1.3.6.1.4.1.232.151.100.9.1.1.6 |
cpqSMASnapshotPreferredPathSnapshot PreferredPath.
May be set only when dual redundant controllers are operating in a
multiple-bus failover configuration.ro Enumeration .1.3.6.1.4.1.232.151.100.9.1.1.7 |
cpqSMASnapshotHostAccessSnapshot Host Access.
Specifies the access path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.9.1.1.8 |
cpqSMASnapshotIdentifierSnapshot ID
This ID consists of the controller node ID plus a 64-bit unit ID
generated by the subsystem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.232.151.100.9.1.1.9 |
cpqSMASnapshotHeadsNumber of Heads.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.10 |
cpqSMASnapshotCylindersNumber of Cylinders.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.11 |
cpqSMASnapshotSectorsNumber of Sectors.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.12 |
cpqSMASnapshotControllerInstanceSnapshot Controller Instance.
This gives us the instance of the controller to which this snapshot is online.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.13 |
cpqSMASnapshotIdentifierSwitchSnapshot Identifier switch.
This is used with the SCSI_VERSION switch when the SCSI version
is set to SCSI-3 mode. The IDENTIFIER switch creates a unique
unit identifier makes the unit visible to the host.This number can
be a value between 1-9999. The value 0 means NOIDENTIFIER.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.14 |
cpqSMASnapshotSubsystemIndexThe index of the subsystem where this snapshot resides.ro INTEGER .1.3.6.1.4.1.232.151.100.9.1.1.15 |