COSINE-ORION-MIB
AI MIB Summary
The COSINE-ORION-MIB provides management objects for monitoring IP Network Operating System (IPNOS) entities, specifically facilitating the retrieval of generic system statistics and configuration parameters for Orion-based network infrastructure. This module enables the tracking of standard SNMP metrics such as system uptime, interface status, and device resource utilization within the IPNOS environment.
The MIB module to describe generic objects for IPNOS system.
Main OID:
cosineOrionMod.1.3.6.1.4.1.3085.1.1.2
3504
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
3504 total| Object Name |
|---|
cosineOrionModThe MIB module to describe generic objects for IPNOS system. MODULE-IDENTITY .1.3.6.1.4.1.3085.1.1.2 |
csOrionEvents OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.1 |
csOrionEventsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.1.1 |
csOrionBladeRemovedA orionBladeRemoved trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the one of the existing Blade was removed from it's slot. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.1 |
csOrionBladeInsertedA csOrionBladeInserted trap signifies that SNMPv2 entity, acting in an agent role, has detected that the one of the Blade was inserted in the empty slot. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.2 |
csOrionBladeStateChangeA csOrionBladeStateChange signifies that the SNMPv2 entity acting in an agent role, has detected that a Blade has changed states. A description of the Blade as well as the entered state is identified in this trap. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.3 |
csOrionFanStatusChangeA csOrionFanStatusChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change in the status of a fan. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.4 |
csOrionConfigChangeA csOrionConfigChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that Configuration was changed. The Trap PDU for this csOrionConfigChange, also carries each of the modified object's OID followed by the changed value. In effect, there are one or more VarBinds follows the csOrionNumConfigChanges object of the Trap PDU. Since these OIDs are the member of one of the table defined in this MIB, type information of the value shall be got from the OID. If the csOrionConfigChangeType is delete, the VarBind that follows the csOrionNumConfigChanges contains the Index(es) of the entry which was deleted. If the csOrionConfigChangeType is addModify, then the VarBind contains all the changed OID-Value pairs followed by the index(es). NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.5 |
csOrionTempStatusChangeThis trap indicates that the temperature status of the Orion system has changed states. If the value of csOrionSystemTempStatus is tempRisingAboveUpperCriticalThreshold(1), the given sensor has detected a transition from the normal temperature range to the hot range. If the value of csOrionSystemTempStatus is tempFallingBelow- UpperCriticalThreshold (2), the given sensor has detected a transition from the 'hot' range back down to the normal range. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.6 |
csOrionPowerSupplyStatusChangeThis trap indicates one of the power supplies has changed state. The following events are reported: supplyModuleInserted (1) supplyModuleRemoved (2) inputVoltageRisingAbovePastLowerCriticalThreshold (3) inputVoltageFallingBelowLowerCriticalThreshold (4) outputVoltageRisingAboveLowerCriticalThreshold (5) outputVoltageFallingBelowLowerCriticalThreshold (6) outputCurrentRisingAboveUpperCriticalThreshold (7) outputCurrentFallingBelowUpperCriticalThreshold (8) auxVoltageRisingAboveLowerCriticalThreshold (9) auxVoltageFallingBelowLowerCriticalThreshold (10) temperatureRisingAboveUpperCriticalThreshold (11) temperatureFallingBelowUpperCriticalThreshold (12) currentShareRisingAboveLowerCriticalThreshold (13) currentShareFallingBelowLowerCriticalThreshold (14) NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.7 |
csOrionLogLinkDownThis trap indicates that a Logical Link on the Orion is about to enter the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.8 |
csOrionLogLinkUpThis trap indicates that a Logical Link on the Orion is about to enter the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.9 |
csOrionVIfDownA csOrionVIfDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the csOrionVIfOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of csOrionVIfOperStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.10 |
csOrionVIfUpA csOrionVIfUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.11 |
csOrionOspfIfStateChangeAn csOspfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup). NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.12 |
csOrionOspfVirtIfStateChangeA csOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point). NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.13 |
csOrionOspfNbrStateChangeA csOspfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by csOspfIfStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.14 |
csOrionOspfVirtNbrStateChangeAn csOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full). NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.15 |
csOrionOspfIfConfigErrorAn csOspfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.16 |
csOrionOspfVirtIfConfigErrorAn csOspfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.17 |
csOrionOspfIfAuthFailureAn csOspfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.18 |
csOrionOspfVirtIfAuthFailureAn csOspfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.19 |
csOrionOspfIfRxBadPacketAn csOspfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.20 |
csOrionOspfVirtIfRxBadPacketAn csOspfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.21 |
csOrionOspfTxRetransmitAn csOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.22 |
csOrionOspfVirtIfTxRetransmitAn csOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.23 |
csOrionOspfOriginateLsaAn csOspfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.24 |
csOrionOspfMaxAgeLsaAn csOspfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.25 |
csOrionOspfLsdbOverflowAn csOspfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded csOspfExtLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.26 |
csOrionOspfLsdbApproachingOverflowAn csOspfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of csOspfExtLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.27 |
csOrionCustomerVrUpA csOrionCustomerVrUp trap signifies that a Virtual Router which services a customer network has has come up. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.28 |
csOrionCustomerVrDownA csOrionCustomerVrDown trap signifies that a Virtual Router which services a customer network has gone down. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.29 |
csOrionServiceProviderVrUpA csOrionServiceProviderVrUp trap signifies that a Virtual Router which is designated as a service provider VR has has come up. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.30 |
csOrionServiceProviderVrDownA csOrionServiceProviderVrDown trap signifies that a Virtual Router which is designated as a service provider VR has gone down. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.31 |
csOrionControlVrUpA csOrionControlVrUp trap signifies that a Virtual Router which is designated as a control VR has come up. If a csOrionBladeRemoved Trap precedes this trap and if that blade is the master control blade then this trap might be from the control VR of the new master blade. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.32 |
csOrionControlVrDownA csOrionControlVrDown trap signifies that a Virtual Router which is designated as a control VR has gone down. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.33 |
csOrionServiceProviderVIfUpA csOrionServiceProviderVIfUp trap signifies that a Virtual Interface on a Service Provider VR has come up. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.34 |
csOrionServiceProviderVIfDownA csOrionServiceProviderVIfDown trap signifies that a Virtual Interface on a Service Provider VR has gone down. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.35 |
csOrionLossOfSignalA csOrionLossOfSignal trap signifies that a physical port on a blade experiencing loss of signal(LOS) on the line. Applicable to both DS3 and E3. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.36 |
csOrionLossOfFrameA csOrionLossOfFrame trap signifies that a physical port on a blade experiencing loss of Frame(LOF) on the line. Applicable to both DS3 and OC3. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.37 |
csOrionDs3AlarmIndicationA csOrionAlarmIndication trap signifies that a physical port on a blade generates an alarm (AIS) that indicates a failure in upstream far end. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.38 |
csOrionLossOfClockA csOrionLossOfClock trap signifies that a physical port on a blade experiencing loss of Clock(LOC) on the line. Applicable to both DS3 and OC3. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.39 |
csOrionBladeRestoreA csOrionBladeRestore trap signifies that a blade had been restored successfully or not. The VarBind that follow contains the list of VPN/VRs affected. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.40 |
csOrionDs3PortIdleA csOrionDs3PortIdle trap signifies that a physical port on a blade received an IDLE signal from the far end indicating it is unequipped to handle any data transfer. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.41 |
csOrionAlarmClearA csOrionAlarmClear trap signifies that a physical port on a blade, which had sent an alarm earlier, indicates that the previous alarm is cleared. Applicable to DS3. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.42 |
csOrionOc3AlarmA csOrionOc3Alarm trap signifies that an OC3 physical port on a blade, which had sent an alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.43 |
csOrionOc3AlarmClearA csOrionOc3AlarmClear trap signifies that an OC3 physical port on a blade, which had sent an alarm earlier, indicates that the prvious alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.44 |
csOrionPacketRingStatusChangeA csOrionPacketRingStatusChange trap signifies that the packet ring status of the chassis has changed. If both endpoints change from zero to r[1,26], that means the status has changed to protection ring. If both endpoints change from r[1,26] to zero, that means the status has changed to no protection ring. If one/both endpoints change from r[1,26] to different r[1,26], that means the topology has changed but not ring status. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.45 |
csOrionInletAirTempStatusChangeThis trap indicates that the inlet air temperature has changed states. If the value of csOrionSystemTempStatus is tempRisingAboveUpperCriticalThreshold(1), the given sensor has detected a transition from the normal temperature range to the hot range. If the value of csOrionSystemTempStatus is tempFallingBelowUpperCriticalThreshold (2), the given sensor has detected a transition from the 'hot' range back down to the normal range. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.46 |
csOrionDevicePresentThis trap indicates that a given I2C device is present. This trap will occur on 9500 and 3500 chassis only. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.47 |
csOrionPowerSupplyMonitorStatusChangeThis trap indicates a power supply monitor event. The following events are reported: redundancyRegained (1) redundancyLost (2) auxVoltageRisingAboveLowerCriticalThreshold (3) auxVoltageFallingBelowLowerCriticalThreshold (4) NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.48 |
csOrionFarEndReceiveFailureA csOrionFarEndReceiveFailure trap signifies that the physical port on the remote end is receiving an alarm. Applicable to DS3. NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.49 |
csOrionCBRFileErrorThis trap reports on the status of the copy operation of a system file from master to standby control blade. Generated only if there is control blade redundancy (cbr). NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.50 |
csOrionBgpMaxPfxLimitThis trap reports that max-prefix limit has been reached for the given neighbor NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.51 |
csOrionBgpNbrMaxPfxLimitThis trap reports that max-prefix limit has been reached for the given neighbor NOTIFICATION-TYPE .1.3.6.1.4.1.3085.3.1.1.1.52 |
csOrionSystem OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2 |
csOrionGeneralSys OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.1 |
csOrionSystemIpAddressA system Ip address.rw IpAddress .1.3.6.1.4.1.3085.3.1.2.1.1 |
csOrionSystemNetMaskA system network mask.rw IpAddress .1.3.6.1.4.1.3085.3.1.2.1.2 |
csOrionSystemGatewayAddressA system default gateway address.rw IpAddress .1.3.6.1.4.1.3085.3.1.2.1.3 |
csOrionSystemFwVerThe fw version used by Orionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.1.4 |
csOrionSystemMajorVerThe version for a Orion as a system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.1.5 |
csOrionSystemNumberOfBladesro Integer32 .1.3.6.1.4.1.3085.3.1.2.1.6 |
csOrionSystemTempStatusThis object identifies the current temperature status within the Orion system. If this object has the value normal(1), the temperature is within the normal range. If the status is hot(2), the temperature is above the normal range and measures should be taken to bring the temperature down.ro Enumeration .1.3.6.1.4.1.3085.3.1.2.1.7 |
csOrionSystemResetThe software reset. It is an action object such that when set to 'reset' will reset all the blades. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .rw Enumeration .1.3.6.1.4.1.3085.3.1.2.1.8 |
csOrionSystemTimeTo set the system date & time with the standard format specified by RFC 2579. Below is the date-time specification. (Display Format: YYYY-MM-DD,HH:MM:SS.ss,+/-:HH:MM) field contents range ----- -------- ----- 1 year* 1999..2098 2 month 1..12 3 day 1..31 4 hour 0..23 5 minutes 0..59 6 seconds 0..60 (use 60 for leap-second) 7 deci-seconds 0..9 8 direction from UTC '+' / '-' 9 hours from UTC* 0..13 10 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 2000 at 1:30:15 PM EDT would be displayed as: 2000-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.1.9 |
csOrionSystemVersionNumThe system version number applies to the IPSX system as a whole. This number has the format: a.b.c.d where 'a.b' is major release number, 'c' is the patch nubmer, and 'd' is the internal release number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.1.10 |
csOrionSystemShutdownThe software shutdown. It is an action object such that when set to 'shutdown' will stop the file-system of all the blades. that when set to 'shutdown' will stop the file-system of all the blades. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .rw Enumeration .1.3.6.1.4.1.3085.3.1.2.1.11 |
csOrionSystemControlBladeFailOverWhen set to 'failover', the master control blade switches over to stand-by control blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none' .rw Enumeration .1.3.6.1.4.1.3085.3.1.2.1.12 |
csOrionSystemCLIRadiusAuthenticationNOTE: This object has been replaced by csOrionSystemLoginServer. When this object is set to radius, radius server will be used to authenticate a user logging into a CLI session. When this object is set to localDatabase, the password file resided locally will be used to authenticate the CLI user.rwobsolete Enumeration .1.3.6.1.4.1.3085.3.1.2.1.13 |
csOrionBoot OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.2 |
csOrionSystemBootTableA list of Sources from which this Orion will boot. SEQUENCE OF CsOrionSystemBootEntry .1.3.6.1.4.1.3085.3.1.2.2.1 |
csOrionSystemBootEntryAn entry containing Boot information applicable to this Orion System. Note, currently there is only one entry in this table. More entries may be added in future releases. CsOrionSystemBootEntry .1.3.6.1.4.1.3085.3.1.2.2.1.1 |
csOrionSystemBootIndexA unique value, greater than zero, for each boot record. Integer32 .1.3.6.1.4.1.3085.3.1.2.2.1.1.1 |
csOrionSystemBootImageName1The absolute path and file name for the boot image. If this string is prefaced with 'FLSH', tftp will be used to boot over the network. This applies to all 6 images.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.2 |
csOrionSystemBootImageName2The 2nd absolute path and file name for the boot image. This will be used only if the previous boot images fail.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.3 |
csOrionSystemBootImageName3The 3rd absolute path and file name for the boot image. This will be used only if the previous boot images fail.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.4 |
csOrionSystemBootImageName4The 4th absolute path and file name for the boot image. This will be used only if the previous boot images fail.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.5 |
csOrionSystemBootImageName5The 5th absolute path and file name for the boot image. This will be used only if the previous boot images fail.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.6 |
csOrionSystemBootImageName6The 6th absolute path and file name for the boot image. This will be used only if the previous boot images fail.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.7 |
csOrionSystemBootPortWhen booting over the network, the port used to load the imagerw Integer32 .1.3.6.1.4.1.3085.3.1.2.2.1.1.8 |
csOrionSystemBootServerAddressA boot server Ip Address. Note, this only applies if this entry specifies booting over the network.rw IpAddress .1.3.6.1.4.1.3085.3.1.2.2.1.1.9 |
csOrionSystemBootLocalIpAddrWhen booting over the network using a boot protocol that does not supply a source IP address, This object specifies the local IP address to use when booting via the network.rw IpAddress .1.3.6.1.4.1.3085.3.1.2.2.1.1.10 |
csOrionSystemBootLocalIpMaskWhen booting over the network using a boot protocol that does not supply a source IP address, This object specifies the local IP address mask to use when booting via the network.rw IpAddress .1.3.6.1.4.1.3085.3.1.2.2.1.1.11 |
csOrionSystemBootDefGwWhen booting over the network, this object is used to identify the gateway to use in communicating with the boot server.rw IpAddress .1.3.6.1.4.1.3085.3.1.2.2.1.1.12 |
csOrionSystemBootConfigThe absolute path and file name for the configuration file. Note, the configuration file must be on the local flash.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.13 |
csOrionSystemBootSaveImageThis object specifies whether the IPSX system will save the boot image in local flash. Note this applies only if the csOrionSystemBootProtocol is tftp(2).rw Enumeration .1.3.6.1.4.1.3085.3.1.2.2.1.1.14 |
csOrionSystemBootUserNameUser Name to use if the download is via FTPrw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.15 |
csOrionSystemBootUserPasswordPassword to use if the download is via FTPrw DisplayString .1.3.6.1.4.1.3085.3.1.2.2.1.1.16 |
csOrionSystemBootInternalNwAddrAll the blades in the system make a internal network. This attribute defines the network part (255.255.0.0) of this subnet. Default is 172.168.0.0rw IpAddress .1.3.6.1.4.1.3085.3.1.2.2.1.1.17 |
csOrionSystemBootConcurrentDownloadsMaximum number of downloads that can occur concurrently. if configured to 0, then there is no limit to number of simultaneous download sessions. This is useful if the TFTP/FTP server cannot handle a large number of TFTP/FTP sessionsrw Integer32 .1.3.6.1.4.1.3085.3.1.2.2.1.1.18 |
csOrionLogin OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.3 |
csOrionSystemLoginUserTableA login information for Orion, using console or telnet. SEQUENCE OF CsOrionSystemLoginUserEntry .1.3.6.1.4.1.3085.3.1.2.3.1 |
csOrionSystemLoginUserEntryAn entry contains information for one CLI login user. CsOrionSystemLoginUserEntry .1.3.6.1.4.1.3085.3.1.2.3.1.1 |
csOrionSystemLoginUserNameThe login user name. DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.2.3.1.1.1 |
csOrionSystemLoginUserDescUser informationrw DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.2.3.1.1.2 |
csOrionSystemLoginUserPasswordA sequence of alphabetical and numerical characters, MUST not be less than 8 characters.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.3.1.1.3 |
csOrionSystemLoginUserRowStatusA row status type for the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.3.1.1.4 |
csOrionSystemLoginUserOperStatusA operational status for this table entry.ro OperStatus .1.3.6.1.4.1.3085.3.1.2.3.1.1.5 |
csOrionSystemLoginRoleTableA role for a login user. SEQUENCE OF CsOrionSystemLoginRoleEntry .1.3.6.1.4.1.3085.3.1.2.3.2 |
csOrionSystemLoginRoleEntryAn entry contains information for one role type. A role is a group of feature access permissions. Each login user is associated with a single role. CsOrionSystemLoginRoleEntry .1.3.6.1.4.1.3085.3.1.2.3.2.1 |
csOrionSystemLoginRoleNameThe name of a role. DisplayString .1.3.6.1.4.1.3085.3.1.2.3.2.1.1 |
csOrionSystemLoginRoleDescInformation about the role.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.3.2.1.2 |
csOrionSystemLoginRoleAccessRightsAccess rights of a role are a list of feature-wise permissions. The permissions of a feature are represented by a 4-byte tuple {rights (1-byte),featureid(3-bytes)}. The features in this list are in the ascending order of their feature-id. rights: Access rights are classified into the following categories (given below along with the mapping to unix-style read,write and execute permissions): 0 : none (rwx-style = ---) 1 : all (rwx-style = rwx) 2 : view (rwx-style = r--) 3 : config (rwx-style = rw-) 4 : monitor (rwx-style = r-x) Feature-id's: A feature is a set of commands which are grouped into a read, write or execute command-type. all (1), access (2), clear (3), device (4), dialup (5), diff_serve (6), event_log (7), field (8), firewall (9), froip (10), nat (11), routing (12), service_selection (13), show (14), tunnel (15), vpnvr (16)rw OCTET STRING .1.3.6.1.4.1.3085.3.1.2.3.2.1.3 |
csOrionSystemLoginRoleRowStatusA row status type for the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.3.2.1.4 |
csOrionSystemLoginDomainTableA domain for a login user. SEQUENCE OF CsOrionSystemLoginDomainEntry .1.3.6.1.4.1.3085.3.1.2.3.3 |
csOrionSystemLoginDomainEntryAn entry contains information for one domain. A domain is a group of object instances which defines the scope a role for for a user. Each login user is associated with a single domain. CsOrionSystemLoginDomainEntry .1.3.6.1.4.1.3085.3.1.2.3.3.1 |
csOrionSystemLoginDomainNameThe name of an access domain. DisplayString .1.3.6.1.4.1.3085.3.1.2.3.3.1.1 |
csOrionSystemLoginDomainDescInformation about the access domain.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.3.3.1.2 |
csOrionSystemLoginDomainVRListA list of VPN/VRs a user can access. A VPN/VR is represented as /. The VPN/VRs in the list are separated either by a space(s). The following are valid wildcards for a VR: /* : All VRs with the given VPN. */* : All VRs. If it used then it should be the only entry in the list.rw LongDisplayString .1.3.6.1.4.1.3085.3.1.2.3.3.1.3 |
csOrionSystemLoginDomainInterfaceListList of interfaces which an user can access. The interfaces in the list are separated either by space(s). Each interface is represented as follows: [/[:channel-range>[:]]] where each range above has the follog syntax: = { * | | - } If the optional elements (,,etc) are not specified they default to '*', which denotes all values. is always less than . If '*' or range is specified for an element then all following elements MUST be wildcard enrtries The chassis as an interface can also be included in the list and is represented by the key-word 'chassis' Valid interface examples: * - same as */*/*/* 5-6/* chassis 5/3-5/* 5/3/2-4 Invalid interface Eg: 5/*/3rw LongDisplayString .1.3.6.1.4.1.3085.3.1.2.3.3.1.4 |
csOrionSystemLoginDomainRowStatusA row status type for the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.3.3.1.5 |
csOrionSystemLoginPermTableAccess permissions for a login user. A permission id represented as a :. A user can have multiple permissions. SEQUENCE OF CsOrionSystemLoginPermEntry .1.3.6.1.4.1.3085.3.1.2.3.4 |
csOrionSystemLoginPermEntryAn entry contains information for one login user permission. CsOrionSystemLoginPermEntry .1.3.6.1.4.1.3085.3.1.2.3.4.1 |
csOrionSystemLoginPermRowStatusA row status type for the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.3.4.1.1 |
csOrionSystemLoginServerWhen this object is set to remote, a remote authentication server (csOrionSystemLoginServerListName) will be used to authenticate a user logging into a CLI session. When this object is set to localDatabase, the password file residing locally will be used to authenticate the CLI user.rw Enumeration .1.3.6.1.4.1.3085.3.1.2.3.5 |
csOrionSystemLoginServerListNameThe name of the server list to use for remote authentication, if no list is specified then the server specified in the default server list is used. Cli authentication uses the server list and default servers configured on the system virtual router.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.3.6 |
csOrionModem OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.4 |
csOrionModemControlThis object controls access to this device via Dial In modem.rw Enumeration .1.3.6.1.4.1.3085.3.1.2.4.1 |
csOrionModemBaudThis object sets the target baud rate of the modem connection.rw Integer32 .1.3.6.1.4.1.3085.3.1.2.4.2 |
csOrionModemFlowCtlThis object specifies the type of flow control used by the modem.rw Enumeration .1.3.6.1.4.1.3085.3.1.2.4.3 |
csOrionModemConnectWaitThis object sets the length of time, in seconds, the modem will wait for a connection.rw Integer32 .1.3.6.1.4.1.3085.3.1.2.4.4 |
csOrionConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.5 |
csOrionConfigSave OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.5.1 |
csOrionConfigSaveFileNameThis object is used when the save configuration is launched on an Orion box by setting the csOrionConfigSave object. The device handle the default value for this object. When this object is not set, the device look for the csOrionSystemBootConfig of the csOrionSystemBootTable. If that is not NULL, that name is used as the file name. Otherwise the default filename of config.dat is used.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.5.1.1 |
csOrionConfigSaveStartThis object triggers the configuration saving on the divice. The result of this action is stored in csOrionConfigSaveStatus.rw Enumeration .1.3.6.1.4.1.3085.3.1.2.5.1.2 |
csOrionConfigSaveStatusThis object triggers the configuration saving on the divice. The result of this action is stored in csOrionConfigSaveStatus.ro Enumeration .1.3.6.1.4.1.3085.3.1.2.5.1.3 |
csOrionConfigLoad OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.5.2 |
csOrionConfigLoadOutputEnableThis object controls whether output from loading configuration file should be printed out to the console. Loading configuration will be quicker if this object is disabled.rw Enumeration .1.3.6.1.4.1.3085.3.1.2.5.2.1 |
csOrionFileSys OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.6 |
csOrionFileSysReqTableFile System Request Table. SEQUENCE OF CsOrionFileSysReqEntry .1.3.6.1.4.1.3085.3.1.2.6.1 |
csOrionFileSysReqEntryAn entry of File System Request Table. CsOrionFileSysReqEntry .1.3.6.1.4.1.3085.3.1.2.6.1.1 |
csOrionFileSysReqIndexThis object identifies a specific File System request entry. NMSs are expected to come up with a unique ID each request. This ID will also be used to index the File System result entry. Integer32 .1.3.6.1.4.1.3085.3.1.2.6.1.1.1 |
csOrionFileSysReqTypeThis object specifies the filesystem operation stated in the enumeration above. We will add entries as we support additional filesystem commands. Objects that hold the parameters must also be set for commands that requires some arguments.rw Enumeration .1.3.6.1.4.1.3085.3.1.2.6.1.1.2 |
csOrionFileSysReqSrcFileThis object is used to hold the source file for the file system operation. Must be set for 'delete', 'copy' and 'rename' requests. For 'load' request, the file to be loaded should be set using this object. If not set, the default file defined in csOrionSystemBootConfig will be loaded.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.6.1.1.3 |
csOrionFileSysReqDestFileThis object is used to hold the source file for the file system operation. Must be set for copy and rename requests.rw DisplayString .1.3.6.1.4.1.3085.3.1.2.6.1.1.4 |
csOrionFileSysReqStatusThis object is used to store the status of the File System request. operation. For 'dir' operation, csOrionFileSysResultTable should only be evaluated after this object yields opSuccess(3).ro Enumeration .1.3.6.1.4.1.3085.3.1.2.6.1.1.5 |
csOrionFileSysReqRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.2.6.1.1.6 |
csOrionFileSysResultTableFile System Result Table. The object csOrionFileSysReqStatus should be evaluated before acquiring the results from this table. SEQUENCE OF CsOrionFileSysResultEntry .1.3.6.1.4.1.3085.3.1.2.6.2 |
csOrionFileSysResultEntryAn entry of File System Result Table. Each file returned from 'dir' request corresponds to an entry in csOrionFileSysResultEntry. Additional 'getnext' is expected to obtain the succeeding files. We will add objects in this table as we expose more file attributes. CsOrionFileSysResultEntry .1.3.6.1.4.1.3085.3.1.2.6.2.1 |
csOrionFileSysResultIndexThis object identifies a specific File System result entry. This index corresponds to the ID provided by NMSs on File System request. Integer32 .1.3.6.1.4.1.3085.3.1.2.6.2.1.1 |
csOrionFileSysResultFilenameThis object is used to hold the filename from the 'dir' request. DisplayString .1.3.6.1.4.1.3085.3.1.2.6.2.1.2 |
csOrionFileSysResultFilesizeThis object is used to hold the filesize from the 'dir' request.ro Integer32 .1.3.6.1.4.1.3085.3.1.2.6.2.1.3 |
csOrionChassisInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.2.7 |
csOrionChassisMidplaneIDMidplane laser ID for this chassis.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.2.7.1 |
csOrionChassisTypeChassis type.ro Enumeration .1.3.6.1.4.1.3085.3.1.2.7.2 |
csOrionChassisPacketRingStatusStatus of the packet ring. noProtection means protection ring is inactive. onProtection means protection ring is active.ro Enumeration .1.3.6.1.4.1.3085.3.1.2.7.3 |
csOrionChassisPacketRingPrimToProtEndpointSlot number of the primary to protection endpoint. If csOrionChassisPacketRingStatus is noProtection, this object will have a value of 0.ro Integer32 .1.3.6.1.4.1.3085.3.1.2.7.4 |
csOrionChassisPacketRingProtToPrimEndpointSlot number of the protection to primary endpoint. If csOrionChassisPacketRingStatus is noProtection, this object will have a value of 0.ro Integer32 .1.3.6.1.4.1.3085.3.1.2.7.5 |
csOrionChassisPacketRingPrimaryCRCCRC count on the primary packet ring.ro Integer32 .1.3.6.1.4.1.3085.3.1.2.7.6 |
csOrionChassisPacketRingProtectionCRCCRC count on the protection packet ring.ro Integer32 .1.3.6.1.4.1.3085.3.1.2.7.7 |
csOrionPortInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3 |
csOrionEthInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.1 |
csEthTableThe Orion Ethernet Table. SEQUENCE OF CsEthEntry .1.3.6.1.4.1.3085.3.1.3.1.1 |
csEthEntryAn entry in the Ethernet Table. CsEthEntry .1.3.6.1.4.1.3085.3.1.3.1.1.1 |
csEthSlotIndexThis object identifies the slot in which the blade that supports this port is installed. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.1.1.1.1 |
csEthModuleIndexThis object identifies a specific module on the blade installed in csEthSlotIndex. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.1.1.1.2 |
csEthPortIndexThis object identifies a specific port on the module installed in csEthModuleIndex. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.1.1.1.3 |
csEthEncapTypeThis object identifies the encapsulation method used on this Ethernet port.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.1.1.4 |
csEthAutonegThis object is used to enable or disable the autonegotiation feature of this Ethernet port. This feature is used to automatically negotiate the Speed and Duplex mode for 10/100 Mbps Ethernet ports.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.1.1.5 |
csEthDuplexThis object is used to specify the Duplex mode of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default value is removed because it is not fixed in the system after reboot when autonegotiation enabled. It is hardware configuration dependent.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.1.1.6 |
csEthSpeedThis object is used to specify the speed of this Ethernet port. This is used only if csEthAutoneg is disabled. Note: The default value is removed because it is not fixed in the system after reboot when autonegotiation enabled. It is hardware configuration dependent.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.1.1.7 |
csEthLinkTestIntervalThis object is used to specify the interval, in seconds, between Link Test packet transmissions. If this object is set to 0, no Link Test packets are sent.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.1.1.1.8 |
csEthAdminStatusThis object is used to enable/disable thie Ethernet port.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.1.1.9 |
csEthOperStatusThis object indicates the current operational status of this Ethernet port.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.1.1.1.10 |
csEthPppoeServiceThis object is used to enable or disable PPPoE service on Ethernet Ports.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.1.1.11 |
csEthSubIfTableThe Orion Ethernet Sub-Interface Table. SEQUENCE OF CsEthSubIfEntry .1.3.6.1.4.1.3085.3.1.3.1.2 |
csEthSubIfEntryThe Parameters for a VLAN Interface. CsEthSubIfEntry .1.3.6.1.4.1.3085.3.1.3.1.2.1 |
csEthSubIfChannelIndexChannel ID of this VLAN connection. Currently, it will always be 0. Integer32 .1.3.6.1.4.1.3085.3.1.3.1.2.1.1 |
csEthSubIfIndexThe Sub Interface Id of the Logical Interface. Integer32 .1.3.6.1.4.1.3085.3.1.3.1.2.1.2 |
csEthSubIfVlanIdThe unipue number between 0 and 4095 that identifies a particular VLAN. The range of VLAN IDs supported per port is from 2 to 4094. The null VLAN Id (0) indicates that the tag header contains only user priority information. The VLAN Id 1, 4095 is reserved for implementation use.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.1.2.1.3 |
csEthSubIfUserPriorityThe user priority for this VLANrw Integer32 .1.3.6.1.4.1.3085.3.1.3.1.2.1.4 |
csEthSubIfVlanNameThe name for this VLANrw DisplayString .1.3.6.1.4.1.3085.3.1.3.1.2.1.5 |
csEthSubIfAdmStatusThis object is used to enable/disable this VLAN.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.2.1.6 |
csEthSubIfOpStatusThe operational status for this VLAN.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.1.2.1.7 |
csEthSubIfRowStatusThis object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.1.2.1.8 |
csEthSubifPppoeServiceThis object is used to enable or disable PPPoE service on VLAN.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.1.2.1.9 |
csEthStatsTableThe Orion Ethernet Table. SEQUENCE OF CsEthStatsEntry .1.3.6.1.4.1.3085.3.1.3.1.3 |
csEthStatsEntryAn entry in the Ethernet Statistic Table. CsEthStatsEntry .1.3.6.1.4.1.3085.3.1.3.1.3.1 |
csEthStatsTxDeferPktsOkThe counter associated with the number of packets deferred upon the first transmit attempt due to a busy line .ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.1 |
csEthStatsTxColCountsThe counter associated with the number of Regular collisions during transmission.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.2 |
csEthStatsTxScolPktsOkThe counter associated with the number of packets transmitted without any errors following a single collisions.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.3 |
csEthStatsTxMulticCollisionPktsOKThe counter associated with the number of packets transmitted without any errors following multiple collisions.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.4 |
csEthStatsTx16CollisionCountsThe counter associated with the number of packets that have experienced 16 consecutive collisions or more.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.5 |
csEthStatsTxLateCollisionCountsThe counter associated with the number of transmission abortions due to a collision occurring after the transmission of packets that are 64 bytes in length.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.6 |
csEthStatsTx64PktsThe counter associated with the number of transmitted packets 64 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.7 |
csEthStatsTx65To127PktsThe counter associated with the number of packets 64 to 127 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.8 |
csEthStatsTx128To255PktsThe counter associated with the number of packets 128 to 255 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.9 |
csEthStatsTx256To511PktsThe counter associated with the number of packets 256 to 511 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.10 |
csEthStatsTx512To1023PktsThe counter associated with the number of transmitted packets 512 to 1023 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.11 |
csEthStatsTx1024To1518PktsThe counter associated with the number of transmitted packets 1024 to 1518 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.12 |
csEthStatsTx1519PktsThe counter associated with the number of transmitted packets with length larger than 1518 bytes, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.13 |
csEthStatsTxPausePktsOkThe counter associated with the number of correct transmitted flow-control packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.14 |
csEthStatsTxErrCountsThe counter associated with the number of packets transmitted with an error due to transmit FIFO underflow or txerr signal assertion.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.15 |
csEthStatsTxOctetsBadThe counter associated with the number of bytes transmitted in packets with errors.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.16 |
csEthStatsRxRuntCountsThe counter associated with the number of frames received without SFD detection but with carrier assertion .ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.17 |
csEthStatsRxOvfCountsThe counter associated with the number of received packets not fully accepted due to receive FIFO overflow .ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.18 |
csEthStatsRxShortPktsOkThe counter associated with the number of received packets without error, less than 64 bytes length .ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.19 |
csEthStatsRxNormCrcCountsThe counter associated with the number of packets received with an integral number of bytes and a CRC error with lengths between 64 bytes and maximum packet size .ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.20 |
csEthStatsRxNormAliCountsThe counter associated with the number of packets received with an nonintegral number of bytes and a CRC error with lengths between 64 bytes and maximum packet size.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.21 |
csEthStatsRxLongPktsCountsThe counter associated with the number ofpackets larger than maximum packet size received without any error .ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.22 |
csEthStatsRxLongCrcCountsThe counter associated with the number of packets larger than maximum packet size received with a CRC errorro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.23 |
csEthStatsRx64PktsThe counter associated with the number of received packets 64 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.24 |
csEthStatsRx65To127PktsThe counter associated with the number of received packets 65 to 127 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.25 |
csEthStatsRx128To255PktsThe counter associated with the number of packets 128 to 255 bytes in length, including bad packetsO.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.26 |
csEthStatsRx256To511PktsThe counter associated with the number of packets 256 to 511 bytes in length, including bad packetsro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.27 |
csEthStatsRx512To1023PktsThe counter associated with the number of packets 512 to 1023 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.28 |
csEthStatsRx1024To1518PktsThe counter associated with the number of packets 1024 to 1518 bytes in length, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.29 |
csEthStatsRx1519PktsThe counter associated with the number of packets with length larger than 1518 bytes and the maximum packet size, including bad packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.30 |
csEthStatsRxPausePktsOkThe counter associated with the number of correct received flow-control packets.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.31 |
csEthStatsRxFalsCrcCountsThe counter associated with the number of false carrier events detectedro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.32 |
csEthStatsRxOctsBadThe counter associated with the number of bytes received in packets with errors.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.33 |
csEthStatsRxSysErrCountsThe counter associated with the number of received packets during which PHY symbol errors were detected.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.34 |
csEthStatsTx1024PktsThe counter associated with the number of transmitted packets 1024 bytes or more in length, including bad packets. It's only for Giga bit Ethernet card.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.35 |
csEthStatsRx1024PktsThe counter associated with the number of packets 1024 bytes or more in length, including bad packets. It's only for Giga bit Ethernet card.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.1.3.1.36 |
csOrionDs3Info OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.2 |
csDs3ConfigTableThe DS3 configuration table. SEQUENCE OF CsDs3ConfigEntry .1.3.6.1.4.1.3085.3.1.3.2.1 |
csDs3ConfigEntryAn entry in the DS3 Configuration table. CsDs3ConfigEntry .1.3.6.1.4.1.3085.3.1.3.2.1.1 |
csDs3ConfigSlotIndexThis object identifies the blade to which this Ds3 Port is attached. Together with csDs3ConfigModuleIndex, csDs3ConfigPortIndex, it uniquely identifies a physical port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.2.1.1.1 |
csDs3ConfigModuleIndexThis object identifies the type of of the Ds3 Module on the blade identified by csChDs3SlotIndex. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.2.1.1.2 |
csDs3ConfigPortIndexThis object identifies the location of the Ds3 Port on the module identified by csChDs3ModuleIndex. Together with csDs3ConfigSlotIndex, csDs3ConfigModuleIndex, it uniquely identifies a physical port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.2.1.1.3 |
csDs3ConfigCableLengthThe length of the DS3 cable. NOTE: This is applicable only for DS3.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.2.1.1.4 |
csDs3ConfigFramingThe framing format used on this Ds3 Interface. The default value is cbit if the interface is DS3. If the interface is E3, e3Framed will be used, and cannot be configured to any other types.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.5 |
csDs3ConfigMdlPathThis object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.6 |
csDs3ConfigMdlIdleSigThis object controls the transmission of the MDL Idle Signal message. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.7 |
csDs3ConfigMdlTestSigThis object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.8 |
csDs3ConfigMdlEicThis object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.1.1.9 |
csDs3ConfigMdlLicThis object specifies the Location Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.1.1.10 |
csDs3ConfigMdlFicThis object specifies the Frame Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.1.1.11 |
csDs3ConfigMdlUnitThis object specifies the Unit Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.1.1.12 |
csDs3ConfigMdlPfiThis object specifies the Facility Identification Code sent in the MDL Path message. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.1.1.13 |
csDs3ConfigMdlPortThis object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.1.1.14 |
csDs3ConfigMdlGeneratorThis object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.1.1.15 |
csDs3ConfigTestT1IdThis object identifies which of the 28 T1's within this DS3 are to be broken out into the Test T1 port. If none of the T1's are to be broken out, this object should be set to 0. NOTE: This is applicable only for DS3.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.2.1.1.16 |
csDs3ConfigAdminStatusThis object is used to enable/disable this Ds3 port.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.17 |
csDs3ConfigOperStatusThis object indicates the current operational status of this Ds3 port.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.2.1.1.18 |
csDs3ConfigClockSourceThis object specifies the source of the Transmit Clock used on this (unchannelized) DS3. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.19 |
csDs3ConfigDeviceTypeThis object indicates whether the interface is DS3 or E3.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.20 |
csDs3ConfigSendCodeThis variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: sendNoCode sending looped or normal data sendLineCode sending a request for a line loopback sendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3/E3 frame) sendResetCode sending a loopback deactivation request NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.21 |
csDs3ConfigLoopbackTypeThis object represents the desired loopback configuration of the DS3 interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. It is the default value. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system. inwardLoop The sent signal at this interface is looped back through the device. dualLoop Both lineLoop and inwardLoop will be active simultaneously.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.22 |
csDs3ConfigLoopbackStatusThis variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The csDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopbackro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.1.1.23 |
csDs3ConfigLineStatusThis variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The csDs3ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see csDs3ConfigLoopbackStatus object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3LoopbackState bit is set, the loopback in effect can be determined from the csDs3ConfigLoopbackStatus object. The various bit positions are: 0 ds3NoAlarm No alarm present 1 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 2 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 3 ds3RcvAIS Receiving AIS failure state 4 ds3XmitAIS Transmitting AIS 5 ds3LOF Receiving LOF failure state 6 ds3LOS Receiving LOS failure state 7 ds3LoopbackState Looping the received signal 8 ds3RcvTestCode Receiving a Test Pattern 9 ds3OtherFailure any line status not defined here 10 ds3UnavailSigState Near End in Unavailable Signal State 11 ds3NetEquipOOS Carrier Equipment Out of Servicero INTEGER .1.3.6.1.4.1.3085.3.1.3.2.1.1.24 |
csDs3ConfigTimeElapsedThe number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.1.1.25 |
csDs3ConfigValidIntervalThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.1.1.26 |
csDs3ConfigInvalidIntervalThe number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.1.1.27 |
csDs3ConfigLineCodingThis variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. NOTE: This is applicable only for E3 for now.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.1.1.28 |
csDs3ConfigNationalBitBit 12 of the E3 G.751 frame. NOTE: This is applicable only for E3.rw INTEGER .1.3.6.1.4.1.3085.3.1.3.2.1.1.29 |
csDs3Ds1ConfigTableThe DS3 DS1 configuration table. This is used to configure each of the DS1 connections within a complete DS3. SEQUENCE OF CsDs3Ds1ConfigEntry .1.3.6.1.4.1.3085.3.1.3.2.2 |
csDs3Ds1ConfigEntryAn entry in the DS3 DS1 Configuration table. CsDs3Ds1ConfigEntry .1.3.6.1.4.1.3085.3.1.3.2.2.1 |
csDs3Ds1IdThis identifies a single DS1 within a complete DS3. Integer32 .1.3.6.1.4.1.3085.3.1.3.2.2.1.1 |
csDs3Ds1FramingThis object specifies the framing used on the DS1 assigned to this channel.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.2 |
csDs3Ds1YellowAlarmDetectThis object specifies whether Yellow Alarm detection is active on the DS1 assigned to this channel.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.3 |
csDs3Ds1YellowAlarmGenThis object specifies whether Yellow Alarm generation is active on the DS1 assigned to this channel. NOTE: This is applicable only for T1.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.4 |
csDs3Ds1LineCodeThis object specifies the variety of Zero Code Suppression used on the on the DS1 assigned to this channel. NOTE: This is applicable only for T1.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.5 |
csDs3Ds1InvertDataThis object specifies whether the 'invert data' feature is enabled on the DS1 assigned to this channel. This feature must be enabled if the Line Code parameter (csDs3Ds1LineCode) is set to ami. NOTE: This is applicable only for T1.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.6 |
csDs3Ds1ClockSourceThis object specifies the source of the Transmit Clock used on the DS1 assigned to this channel. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for T1.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.7 |
csDs3Ds1FdlThis is used to enable/disable 1 second transmission of performance reports via ANSI 403 FDL. If this is disabled, the AT&T 54016 version of FDL is used. Note, FDL is available only for ESF framing. And so it is only applicable for T1.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.8 |
csDs3Ds1OperStatusThis object indicates the current operational status of this DS1.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.2.2.1.9 |
csDs3Ds1SendCodeThis variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. NOTE: This is applicable only for T1.. The values mean: ds1SendNoCode sending looped or normal data ds1SendLineCode sending a request for a line loopback ds1SendPayloadCode sending a request for a payload loopback ds1SendResetCode sending a loopback termination requestrw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.10 |
csDs3Ds1LoopbackTypeThis object represents the desired loopback configuration of the DS1 interface. This variable will be interpreted only when csDs3Ds1LoopbackDestination is set to a valid value. NOTE: This is applicable only for T1. noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. payloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system inwardLoop The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. Cannot be applied to far end. dualLoop Both dsx1LineLoop and dsx1InwardLoop will be active simultaneously. Cannot be applied to far end.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.2.1.11 |
csDs3Ds1LoopbackStatusThis variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. NOTE: This is applicable only for T1. The csDs3Ds1LoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds1NoLoopback 2 ds1NearEndPayloadLoopback 4 ds1NearEndLineLoopback 8 ds1NearEndOtherLoopback 16 ds1NearEndInwardLoopback 32 ds1FarEndPayloadLoopback 64 ds1FarEndLineLoopbackro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.2.1.12 |
csDs3Ds1LineConfigThis variable represents DS1/E1 transmit line configuration. This is normally used for dignostic or service purpose, it is not supposed for user to configure. The various bit positions are: BIT(0) not used BIT(1) ds1NoAlarm BIT(2) ds1RcvFarEndLOF BIT(3) ds1XmtFarEndLOF BIT(4) ds1RcvAIS BIT(5) ds1XmtAIS BIT(6) ds1LossOfFrame BIT(7) ds1LossOfSignal BIT(8) ds1LoopbackState BIT(9) ds1T16AIS BIT(10) ds1RcvFarEndLOMF BIT(11) ds1XmtFarEndLOMF BIT(12) ds1RcvTestCode BIT(13) ds1OtherFailure BIT(14) ds1UnavailSigState BIT(15) ds1NetEquipOOS BIT(16) ds1RcvPayloadAIS BIT(17) ds1Ds2PerfThreshold BIT(18) ds1XmtTrnkCondrw Integer32 .1.3.6.1.4.1.3085.3.1.3.2.2.1.13 |
csDs3Ds1LineStatusThis variable represents DS1/E1 transmit and receive line status. The various bit positions are: BIT(0) not used BIT(1) ds1NoAlarm BIT(2) ds1RcvFarEndLOF BIT(3) ds1XmtFarEndLOF BIT(4) ds1RcvAIS BIT(5) ds1XmtAIS BIT(6) ds1LossOfFrame BIT(7) ds1LossOfSignal BIT(8) ds1LoopbackState BIT(9) ds1T16AIS BIT(10) ds1RcvFarEndLOMF BIT(11) ds1XmtFarEndLOMF BIT(12) ds1RcvTestCode BIT(13) ds1OtherFailure BIT(14) ds1UnavailSigState BIT(15) ds1NetEquipOOS BIT(16) ds1RcvPayloadAIS BIT(17) ds1Ds2PerfThreshold BIT(18) ds1XmtTrnkCondro Integer32 .1.3.6.1.4.1.3085.3.1.3.2.2.1.14 |
csDs3E1IntBitsThis variable is used to configure the 2-bits international bits for the E1 interface. NOTE: This is applicable only for E1.rw INTEGER .1.3.6.1.4.1.3085.3.1.3.2.2.1.15 |
csDs3E1NatBitsThis 4-bit object is added for the E1 sub-multiframe aligned national bit codeword configuration. NOTE: This is applicable only for E1.rw INTEGER .1.3.6.1.4.1.3085.3.1.3.2.2.1.16 |
csChDs3TableThe Channelized DS3 Channel configuration table. SEQUENCE OF CsChDs3Entry .1.3.6.1.4.1.3085.3.1.3.2.3 |
csChDs3EntryAn entry in the DS3 Fractional table. CsChDs3Entry .1.3.6.1.4.1.3085.3.1.3.2.3.1 |
csChDs3SlotIndexThis object identifies the blade to which this Ds3 Port is attached. Together with csChDs3ModuleIndex, csChDs3PortIndex, it uniquely identifies a physical port. Integer32 .1.3.6.1.4.1.3085.3.1.3.2.3.1.1 |
csChDs3ModuleIndexThis object identifies the module of the Ds3 Blade Integer32 .1.3.6.1.4.1.3085.3.1.3.2.3.1.2 |
csChDs3PortIndexThis object identifies the location of the Ds3 Port on the blade identified by csChDs3SlotIndex. Together with csChDs3SlotIndex, it uniquely identifies a physical port. Integer32 .1.3.6.1.4.1.3085.3.1.3.2.3.1.3 |
csChDs3ChNumberThe channel number for this entry. Integer32 .1.3.6.1.4.1.3085.3.1.3.2.3.1.4 |
csChDs3T1NumberThis object identifies the DS1 number that is assigned to this channel. This number for E1 is 1 to 16. NOTE: This object can only be set during row creation. Once the row is created, this object cannot be modified.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.2.3.1.5 |
csChDs3TimeSlotsThis object specifies the individual DS0 time slots within the DS1(T1 or E1, identified by csChDs3T1Number) that are assigned to this channel. The format can be a range of slots (1-8), a list of slots (1, 3, 7), or a mix of both. NOTE: This object can only be set during row creation. Once the row is created, this object cannot be modified.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.3.1.6 |
csChDs3SpeedThis object specifies the speed (and, hence the signaling mode) of the DS1 assigned to this channel.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.3.1.7 |
csChDs3EncapThis object specifies the encapsulation used on this DS3 channel. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.3.1.8 |
csChDs3RowStatusA row status type for this Channel.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.2.3.1.9 |
csChDs3OperStatusA operational status for this Channel.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.2.3.1.10 |
csDs3StatCurrentTableThe DS3/E3 current table contains various statistics being collected for the current 15 minute interval. SEQUENCE OF CsDs3StatCurrentEntry .1.3.6.1.4.1.3085.3.1.3.2.4 |
csDs3StatCurrentEntryAn entry in the DS3/E3 Current table. CsDs3StatCurrentEntry .1.3.6.1.4.1.3085.3.1.3.2.4.1 |
csDs3StatCurrentPESsThe counter associated with the number of P-bit Errored Seconds. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.1 |
csDs3StatCurrentPSESsThe counter associated with the number of P-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.2 |
csDs3StatCurrentSEFSsThe counter associated with the number of Severely Errored Framing Seconds. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.3 |
csDs3StatCurrentUASsThe counter associated with the number of Unavailable Seconds. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.4 |
csDs3StatCurrentLCVsThe counter associated with the number of Line Coding Violations. NOTE: This is applicable for both E3 and DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.5 |
csDs3StatCurrentPCVsThe counter associated with the number of P-bit Coding Violations. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.6 |
csDs3StatCurrentLESsThe number of Line Errored Seconds. NOTE: This is applicable for both E3 and DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.7 |
csDs3StatCurrentCCVsThe number of C-bit Coding Violations. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.8 |
csDs3StatCurrentCESsThe number of C-bit Errored Seconds. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.9 |
csDs3StatCurrentCSESsThe number of C-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.10 |
csDs3StatCurrentLSESsThe number of Line Severely Errored Seconds. NOTE: This is applicable for both E3 and DS3.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.4.1.11 |
csDs3StatIntervalTableThe DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by csDs3StatIntervalNumber) and for one specific DS3 port (identifed by csDs3ConfigPortIndex). SEQUENCE OF CsDs3StatIntervalEntry .1.3.6.1.4.1.3085.3.1.3.2.5 |
csDs3StatIntervalEntryAn entry in the DS3/E3 Interval table. CsDs3StatIntervalEntry .1.3.6.1.4.1.3085.3.1.3.2.5.1 |
csDs3StatIntervalNumberA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. INTEGER .1.3.6.1.4.1.3085.3.1.3.2.5.1.1 |
csDs3StatIntervalPESsThe counter associated with the number of P-bit Errored Seconds. NOTE: This is applicable only for DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.2 |
csDs3StatIntervalPSESsThe counter associated with the number of P-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.3 |
csDs3StatIntervalSEFSsThe counter associated with the number of Severely Errored Framing Seconds. NOTE: This is applicable for both DS3 and E3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.4 |
csDs3StatIntervalUASsThe counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary. NOTE: This is applicable only for DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.5 |
csDs3StatIntervalLCVsThe counter associated with the number of Line Coding Violations. NOTE: This is applicable for both E3 and DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.6 |
csDs3StatIntervalPCVsThe counter associated with the number of P-bit Coding Violations. NOTE: This is applicable only for DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.7 |
csDs3StatIntervalLESsThe number of Line Errored Seconds (BPVs or illegal zero sequences). NOTE: This is applicable for both E3 and DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.8 |
csDs3StatIntervalCCVsThe number of C-bit Coding Violations. NOTE: This is applicable only for DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.9 |
csDs3StatIntervalCESsThe number of C-bit Errored Seconds. NOTE: This is applicable only for DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.10 |
csDs3StatIntervalCSESsThe number of C-bit Severely Errored Seconds. NOTE: This is applicable only for DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.11 |
csDs3StatIntervalLSESsThe number of Line Severely Errored Seconds. NOTE: This is applicable for both E3 and DS3.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.5.1.12 |
csDs3StatIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.2.5.1.13 |
csDs3StatTotalTableThe DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. SEQUENCE OF CsDs3StatTotalEntry .1.3.6.1.4.1.3085.3.1.3.2.6 |
csDs3StatTotalEntryAn entry in the DS3/E3 Total table. CsDs3StatTotalEntry .1.3.6.1.4.1.3085.3.1.3.2.6.1 |
csDs3StatTotalPESsThe counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.1 |
csDs3StatTotalPSESsThe counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.2 |
csDs3StatTotalSEFSsThe counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.3 |
csDs3StatTotalUASsThe counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.4 |
csDs3StatTotalLCVsThe counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.5 |
csDs3StatTotalPCVsThe counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.6 |
csDs3StatTotalLESsThe number of Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.7 |
csDs3StatTotalCCVsThe number of C-bit Coding Violations encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.8 |
csDs3StatTotalCESsThe number of C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.9 |
csDs3StatTotalCSESsThe number of C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24-hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable only for DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.10 |
csDs3StatTotalLSESsThe number of Line Severely Errored Seconds encountered by a DS3 interface in the previous 24-hour interval. Invalid 15 minute intervals count as 0. NOTE: This is applicable for both E3 and DS3.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.6.1.11 |
csDs3Ds1CurrentTableThe DS1 current table contains various statistics being collected for the current 15 minute interval. SEQUENCE OF CsDs3Ds1CurrentEntry .1.3.6.1.4.1.3085.3.1.3.2.7 |
csDs3Ds1CurrentEntryAn entry in the DS1 Current table. CsDs3Ds1CurrentEntry .1.3.6.1.4.1.3085.3.1.3.2.7.1 |
csDs3Ds1CurrentESsThe number of Errored Seconds.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.1 |
csDs3Ds1CurrentSESsThe number of Severely Errored Seconds.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.2 |
csDs3Ds1CurrentSEFSsThe number of Severely Errored Framing Seconds.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.3 |
csDs3Ds1CurrentUASsThe number of Unavailable Seconds.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.4 |
csDs3Ds1CurrentCSSsThe number of Controlled Slip Seconds.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.5 |
csDs3Ds1CurrentPCVsThe number of Path Coding Violations.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.6 |
csDs3Ds1CurrentLESsThe number of Line Errored Seconds.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.7 |
csDs3Ds1CurrentBESsThe number of Bursty Errored Seconds.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.8 |
csDs3Ds1CurrentDMsThe number of Degraded Minutes.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.9 |
csDs3Ds1CurrentLCVsThe number of Line Code Violations (LCVs).ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.2.7.1.10 |
csDs3Ds1IntervalTableThe DS1 Interval Table contains various statistics collected by each DS1 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by csDs3Ds1IntervalNumber) for one specific instance (identified by csDs3Ds1Id). SEQUENCE OF CsDs3Ds1IntervalEntry .1.3.6.1.4.1.3085.3.1.3.2.8 |
csDs3Ds1IntervalEntryAn entry in the DS1 Interval table. CsDs3Ds1IntervalEntry .1.3.6.1.4.1.3085.3.1.3.2.8.1 |
csDs3Ds1IntervalNumberA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1. INTEGER .1.3.6.1.4.1.3085.3.1.3.2.8.1.1 |
csDs3Ds1IntervalESsThe number of Errored Seconds.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.2 |
csDs3Ds1IntervalSESsThe number of Severely Errored Seconds.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.3 |
csDs3Ds1IntervalSEFSsThe number of Severely Errored Framing Seconds.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.4 |
csDs3Ds1IntervalUASsThe number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.5 |
csDs3Ds1IntervalCSSsThe number of Controlled Slip Seconds.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.6 |
csDs3Ds1IntervalPCVsThe number of Path Coding Violations.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.7 |
csDs3Ds1IntervalLESsThe number of Line Errored Seconds.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.8 |
csDs3Ds1IntervalBESsThe number of Bursty Errored Seconds.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.9 |
csDs3Ds1IntervalDMsThe number of Degraded Minutes.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.10 |
csDs3Ds1IntervalLCVsThe number of Line Code Violations.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.2.8.1.11 |
csDs3Ds1IntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.2.8.1.12 |
csDs3Ds1TotalTableThe DS1 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. SEQUENCE OF CsDs3Ds1TotalEntry .1.3.6.1.4.1.3085.3.1.3.2.9 |
csDs3Ds1TotalEntryAn entry in the DS1 Total table. CsDs3Ds1TotalEntry .1.3.6.1.4.1.3085.3.1.3.2.9.1 |
csDs3Ds1TotalESsThe sum of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.1 |
csDs3Ds1TotalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.2 |
csDs3Ds1TotalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.3 |
csDs3Ds1TotalUASsThe number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.4 |
csDs3Ds1TotalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.5 |
csDs3Ds1TotalPCVsThe number of Path Coding Violations encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.6 |
csDs3Ds1TotalLESsThe number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.7 |
csDs3Ds1TotalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.8 |
csDs3Ds1TotalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.9 |
csDs3Ds1TotalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in the current 15 minute interval. Invalid 15 minute intervals count as 0.ro PerfTotalCount .1.3.6.1.4.1.3085.3.1.3.2.9.1.10 |
csUnchanDs3ConfigTableThe Unchannelized DS3 configuration table. SEQUENCE OF CsUnchanDs3ConfigEntry .1.3.6.1.4.1.3085.3.1.3.2.10 |
csUnchanDs3ConfigEntryAn entry in the Unchannelized DS3 Configuration table. CsUnchanDs3ConfigEntry .1.3.6.1.4.1.3085.3.1.3.2.10.1 |
csUnchanDs3ConfigSlotIndexThis object identifies the blade to which this Unchannelized Ds3 Port is attached. Together with csUnchanDs3ConfigPortIndex, it uniquely identifies a physical port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.2.10.1.1 |
csUnchanDs3ConfigModuleIndexThis object identifies the module on the Unchannelized Ds3 Blade. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.2.10.1.2 |
csUnchanDs3ConfigPortIndexThis object identifies the location of the Unchannelized Ds3 Port on the blade identified by csUnchanDs3SlotIndex. Together with csUnchanDs3ConfigSlotIndex, it uniquely identifies a physical port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.2.10.1.3 |
csUnchanDs3ConfigCableLengthThe length of the DS3 cable.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.2.10.1.4 |
csUnchanDs3ConfigFramingThe framing format used on this Ds3 Interface. The default value is cbit if the interface is DS3. If the interface is E3, e3Framed will be used, and cannot be configured to any other types.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.5 |
csUnchanDs3ConfigMdlPathThis object controls the transmission of the MDL Path message. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.6 |
csUnchanDs3ConfigMdlIdleSigThis object controls the transmission of the MDL Idle Signal message. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.7 |
csUnchanDs3ConfigMdlTestSigThis object controls the transmission of the MDL Test Signal message. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.8 |
csUnchanDs3ConfigMdlEicThis object specifies the Equipment Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.10.1.9 |
csUnchanDs3ConfigMdlLicThis object specifies the Location Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.10.1.10 |
csUnchanDs3ConfigMdlFicThis object specifies the Frame Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.10.1.11 |
csUnchanDs3ConfigMdlUnitThis object specifies the Unit Identification Code. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.10.1.12 |
csUnchanDs3ConfigMdlPfiThis object specifies the Facility Identification Code sent in the MDL Path message. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.10.1.13 |
csUnchanDs3ConfigMdlPortThis object specifies the Port number string sent in the MDL Idle Signal message. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.10.1.14 |
csUnchanDs3ConfigMdlGeneratorThis object specifies the Generator number string sent in the MDL Test Signal message. NOTE: This is applicable only for DS3.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.2.10.1.15 |
csUnchanDs3ConfigAdminStatusThis object is used to enable/disable this Ds3/E3 port.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.16 |
csUnchanDs3ConfigOperStatusThis object indicates the current operational status of this Ds3/E3 port.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.2.10.1.17 |
csUnchanDs3ConfigClockSourceThis object specifies the source of the Transmit Clock used on this (unchannelized) DS3. If this object is set to internal(1), a local clock source is used. If this object is set to line(2), the recovered received clock is used as the transmit clock. NOTE: This is applicable only for DS3.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.18 |
csUnchanDs3ConfigEncapThis object specifies the encapsulation used on this DS3/E3 port. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.19 |
csUnchanDs3ConfigSendCodeThis variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. NOTE: This is applicable only for DS3. The values mean: sendNoCode sending looped or normal data sendLineCode sending a request for a line loopback sendResetCode sending a loopback deactivation requestrw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.20 |
csUnchanDs3ConfigLoopbackTypeThis object represents the desired loopback configuration of the DS3 interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. lineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. otherLoop Loopbacks that are not defined here. Currently not used in the IPSX system. inwardLoop The sent signal at this interface is looped back through the device. dualLoop Both lineLoop and inwardLoop will be active simultaneously.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.21 |
csUnchanDs3ConfigLoopbackStatusThis variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The csUnchanDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopbackro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.10.1.22 |
csUnchanDs3ConfigLineStatusThis variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The csUnchanDs3ConfigLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see csUnchanDs3ConfigLoopbackStatus object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3LoopbackState bit is set, the loopback in effect can be determined from the csUnchanDs3ConfigLoopbackStatus object. The various bit positions are: 0 ds3NoAlarm No alarm present 1 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 2 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 3 ds3RcvAIS Receiving AIS failure state 4 ds3XmitAIS Transmitting AIS 5 ds3LOF Receiving LOF failure state 6 ds3LOS Receiving LOS failure state 7 ds3LoopbackState Looping the received signal 8 ds3RcvTestCode Receiving a Test Pattern 9 ds3OtherFailure any line status not defined here 10 ds3UnavailSigState Near End in Unavailable Signal State 11 ds3NetEquipOOS Carrier Equipment Out of Servicero INTEGER .1.3.6.1.4.1.3085.3.1.3.2.10.1.23 |
csUnchanDs3ConfigTimeElapsedThe number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.10.1.24 |
csUnchanDs3ConfigValidIntervalThe number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.10.1.25 |
csUnchanDs3ConfigInvalidIntervalThe number of intervals in the range from 0 to csDs3ConfigValidInterval for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).ro INTEGER .1.3.6.1.4.1.3085.3.1.3.2.10.1.26 |
csUnchanDs3ConfigDeviceTypeThis object indicates whether the interface is DS3 or E3.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.2.10.1.27 |
csOrionOc3Info OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3 |
csOrionOc3Config OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.1 |
csOc3ConfigTableThe OC3 configuration table. SEQUENCE OF CsOc3ConfigEntry .1.3.6.1.4.1.3085.3.1.3.3.1.1 |
csOc3ConfigEntryAn entry in the DS3 Configuration table. CsOc3ConfigEntry .1.3.6.1.4.1.3085.3.1.3.3.1.1.1 |
csOc3SlotIndexThis object identifies the blade to which this OC3 Port is attached. Together with csOc3ModuleIndex, csOc3PortIndex, it uniquely identifies a physical port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.1 |
csOc3ModuleIndexThis object identifies the module on the OC3 blade Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.2 |
csOc3PortIndexThis object identifies the location of the OC3 Port on the blade identified by csOc3SlotIndex, csOc3ModuleIndex. Together with csOc3SlotIndex, it uniquely identifies a physical port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.3 |
csOc3ClockSourceThis object identifies the source of the clock signal for this OC3 port.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.4 |
csOc3CrcTypeThis object identifies the type of CRC used on this OC3 port. This is only used by Packet Over Sonet.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.5 |
csOc3SectionJ0This object identifies the section trace byte (j0) used on this OC3 port. If this object is set to hex01(1), the value sent within the j0 (section trace byte) element of the frame header is 0x01. This value should be set for interoperability with some SDH devices in Japan. If this object is set to hexCC(2), the value of the j0 element is 0xcc. This is the default value and should be used in the majority of cases.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.6 |
csOc3LineS1S0This object identifies the payload pointer byte (s1s0) used on this OC3 port. If this object is set to oc3c(1), the value sent within the s1s0 (payload pointer byte) element of the frame header is 0. If this object is set to au4(2), the value of the s1s0 element is 2.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.7 |
csOc3PathC2This object identifies the path signal identifier used on this OC3 port. If this object is set to pppOrHdlc(1), the value sent within the c2 (path signal identifier) element of the frame header is 0xCF. If this object is set to atm(2), the value of the c2 element is 0x13.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.8 |
csOc3PathJ1This object is the path trace sent in the J1 byte of path overhead. It is padded by the OC3 driver with and to make up the 64-byte length.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.9 |
csOc3FarEndJ1The expected path trace of the far end interface.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.10 |
csOc3ScrambleThis object controls the scrambling feature on this OC3 port. If this object is enabled, the SPE payload will be scrambled. If this object is diabled, the SPE payload will not be scrambled. SPE payload refers to that of either ATM or POS depending on the value of csOc3PathC2.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.11 |
csOc3NearEndPerfMonControlrw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.12 |
csOc3FarEndPerfMonControlrw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.13 |
csOc3ApsControlrw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.14 |
csOc3ApsForceForce protection switch. When set to 'forceToSwitch' it switches the active port between the two internal ports indicated by csOc3ApsActivePort object. NOTE: This is an action object. Read operation returns 'none'.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.15 |
csOc3ApsActivePortThis object indicates which of the internal port is currently active. The non-active one is used for protection.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.16 |
csOc3AlarmControlrw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.17 |
csOc3LoopbackThe current loopback state of the SONET/SDH interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. facilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.18 |
csOc3AdminStatusThis object is used to enable/disable this Ds3 port.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.19 |
csOc3OperStatusThis object indicates the current operational status of this Ds3 port.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.20 |
csOc3TimeElapsedThe number of seconds that have elapsed since the beginning of the current measurement period.ro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.21 |
csOc3ValidIntervalsThis object indicates the number of previous 15-minute intervals for which data was collected.ro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.22 |
csOc3InvalidIntervalsThis object indicates the number of previous 15-minute intervals for which data was not able to be collected.ro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.23 |
csOc3PosEncapTypeThis object specifies the encapsulation used on this port. If the encapsulation type is frameRelay(2), use the csFrameRelayTable to configure the Frame Relay specific parameters.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.24 |
csOc3PosEmptyCellTypeThis object is used to select the type of empty cell to be transmitted. It is deprecated due to not being supported in POS.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.25 |
csOc3PosMaxPacketSizeThis object specifies the maximum packet size required for this port. This object applies to POS only.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.26 |
csOc3PosOperStatusThis object indicates the current operational status of this channel. It is deprecated in favor of using csOc3AdminStatus instead.rodeprecated OperStatus .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.27 |
csOc3MediumLineTypeThis object describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value sonetOther should be used when the Line Type is not one of the listed values.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.28 |
csOc3ReceivedPathJ1The actual received path trace of the far end interface.ro DisplayString .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.29 |
csOcNSpeedThe speed of OCn interface.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.3.1.1.1.30 |
csOrionOc3Section OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.2 |
csOc3SectionCurrentTableThe SONET/SDH Section Current table. SEQUENCE OF CsOc3SectionCurrentEntry .1.3.6.1.4.1.3085.3.1.3.3.2.1 |
csOc3SectionCurrentEntryAn entry in the SONET/SDH Section Current table. CsOc3SectionCurrentEntry .1.3.6.1.4.1.3085.3.1.3.3.2.1.1 |
csOc3SectionCurrentStatusThis variable indicates the status of the interface. The sonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The csOc3SectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 csOc3SectionNoDefect 2 csOc3SectionLOS 4 csOc3SectionLOFro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.2.1.1.1 |
csOc3SectionCurrentESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15-minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.1.1.2 |
csOc3SectionCurrentSESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15-minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.1.1.3 |
csOc3SectionCurrentSEFSsThe counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.1.1.4 |
csOc3SectionCurrentCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.1.1.5 |
csOc3SectionIntervalTableThe SONET/SDH Section Interval table. SEQUENCE OF CsOc3SectionIntervalEntry .1.3.6.1.4.1.3085.3.1.3.3.2.2 |
csOc3SectionIntervalEntryAn entry in the SONET/SDH Section Interval table. CsOc3SectionIntervalEntry .1.3.6.1.4.1.3085.3.1.3.3.2.2.1 |
csOc3SectionIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. Integer32 .1.3.6.1.4.1.3085.3.1.3.3.2.2.1.1 |
csOc3SectionIntervalESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.2.2.1.2 |
csOc3SectionIntervalSESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.2.2.1.3 |
csOc3SectionIntervalSEFSsThe counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.2.2.1.4 |
csOc3SectionIntervalCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.2.2.1.5 |
csOc3SectionIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.3.2.2.1.6 |
csOc3SectionDayTableThe SONET/SDH Section Day table. SEQUENCE OF CsOc3SectionDayEntry .1.3.6.1.4.1.3085.3.1.3.3.2.3 |
csOc3SectionDayEntryAn entry in the SONET/SDH Section Day table. CsOc3SectionDayEntry .1.3.6.1.4.1.3085.3.1.3.3.2.3.1 |
csOc3SectionDayESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Section for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.3.1.1 |
csOc3SectionDaySESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.3.1.2 |
csOc3SectionDaySEFSsThe counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.3.1.3 |
csOc3SectionDayCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Section for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.3.1.4 |
csOc3SectionPrevDayTableThe SONET/SDH Section Previous Day table. SEQUENCE OF CsOc3SectionPrevDayEntry .1.3.6.1.4.1.3085.3.1.3.3.2.4 |
csOc3SectionPrevDayEntryAn entry in the SONET/SDH Section Day table. CsOc3SectionPrevDayEntry .1.3.6.1.4.1.3085.3.1.3.3.2.4.1 |
csOc3SectionPrevDayESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Section for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.4.1.1 |
csOc3SectionPrevDaySESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.4.1.2 |
csOc3SectionPrevDaySEFSsThe counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.4.1.3 |
csOc3SectionPrevDayCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Section for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.2.4.1.4 |
csOrionOc3Line OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.3 |
csOc3LineCurrentTableThe SONET/SDH Line Current table. SEQUENCE OF CsOc3LineCurrentEntry .1.3.6.1.4.1.3085.3.1.3.3.3.1 |
csOc3LineCurrentEntryAn entry in the SONET/SDH Line Current table. CsOc3LineCurrentEntry .1.3.6.1.4.1.3085.3.1.3.3.3.1.1 |
csOc3LineCurrentStatusThis variable indicates the status of the interface. The sonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 csOc3LineNoDefect 2 csOc3LineAIS 4 csOc3LineRDIro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.3.1.1.1 |
csOc3LineCurrentESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.1.1.2 |
csOc3LineCurrentSESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.1.1.3 |
csOc3LineCurrentCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.1.1.4 |
csOc3LineCurrentUASsThe counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.1.1.5 |
csOc3LineCurrentFCsThe counter associated with the number of failure counts encountered by a SONET/SDH Line in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.1.1.6 |
csOc3LineIntervalTableThe SONET/SDH Line Interval table. SEQUENCE OF CsOc3LineIntervalEntry .1.3.6.1.4.1.3085.3.1.3.3.3.2 |
csOc3LineIntervalEntryAn entry in the SONET/SDH Line Interval table. CsOc3LineIntervalEntry .1.3.6.1.4.1.3085.3.1.3.3.3.2.1 |
csOc3LineIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. Integer32 .1.3.6.1.4.1.3085.3.1.3.3.3.2.1.1 |
csOc3LineIntervalESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.3.2.1.2 |
csOc3LineIntervalSESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.3.2.1.3 |
csOc3LineIntervalCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.3.2.1.4 |
csOc3LineIntervalUASsThe counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.3.2.1.5 |
csOc3LineIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.3.3.2.1.6 |
csOc3LineIntervalFCsThe counter associated with the number of failure counts encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.3.2.1.7 |
csOc3LineDayTableThe SONET/SDH Line Day table. SEQUENCE OF CsOc3LineDayEntry .1.3.6.1.4.1.3085.3.1.3.3.3.3 |
csOc3LineDayEntryAn entry in the SONET/SDH Line Day table. CsOc3LineDayEntry .1.3.6.1.4.1.3085.3.1.3.3.3.3.1 |
csOc3LineDayESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Line for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.3.1.1 |
csOc3LineDaySESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.3.1.2 |
csOc3LineDayCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Line for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.3.1.3 |
csOc3LineDayUASsThe counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.3.1.4 |
csOc3LineDayFCsThe counter associated with the number of failure counts encountered by a SONET/SDH Line for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.3.1.5 |
csOc3LinePrevDayTableThe SONET/SDH Line Day table. SEQUENCE OF CsOc3LinePrevDayEntry .1.3.6.1.4.1.3085.3.1.3.3.3.4 |
csOc3LinePrevDayEntryAn entry in the SONET/SDH Line Previous Day table. CsOc3LinePrevDayEntry .1.3.6.1.4.1.3085.3.1.3.3.3.4.1 |
csOc3LinePrevDayESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Line for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.4.1.1 |
csOc3LinePrevDaySESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.4.1.2 |
csOc3LinePrevDayCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Line for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.4.1.3 |
csOc3LinePrevDayUASsThe counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.4.1.4 |
csOc3LinePrevDayFCsThe counter associated with the number of failure counts encountered by a SONET/SDH Line for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.3.4.1.5 |
csOrionOc3FarEndLine OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.4 |
csOrionOc3Path OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.5 |
csOc3PathCurrentTableThe SONET/SDH Path Current table. SEQUENCE OF CsOc3PathCurrentEntry .1.3.6.1.4.1.3085.3.1.3.3.5.1 |
csOc3PathCurrentEntryAn entry in the SONET/SDH Path Current table. CsOc3PathCurrentEntry .1.3.6.1.4.1.3085.3.1.3.3.5.1.1 |
csOc3PathCurrentWidthA value that indicates the type of the SONET/SDH Path. For SONET, the assigned types are the STS-Nc SPEs, where N = 1, 3, 12, 24, and 48. STS-1 is equal to 51.84 Mbps. For SDH, the assigned types are the STM-Nc VCs, where N = 1, 4, and 16.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.3.5.1.1.1 |
csOc3PathCurrentStatusThis variable indicates the status of the interface. The sonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetPathNoDefect 2 sonetPathSTSLOP 4 sonetPathSTSAIS 8 sonetPathSTSRDI 16 sonetPathUnequipped 32 sonetPathSignalLabelMismatchro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.5.1.1.2 |
csOc3PathCurrentESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.1.1.3 |
csOc3PathCurrentSESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.1.1.4 |
csOc3PathCurrentCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.1.1.5 |
csOc3PathCurrentUASsThe counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.1.1.6 |
csOc3PathCurrentFCsThe counter associated with the number of failure counts encountered by a Path in the current 15 minute interval.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.1.1.7 |
csOc3PathIntervalTableThe SONET/SDH Path Interval table. SEQUENCE OF CsOc3PathIntervalEntry .1.3.6.1.4.1.3085.3.1.3.3.5.2 |
csOc3PathIntervalEntryAn entry in the SONET/SDH Path Interval table. CsOc3PathIntervalEntry .1.3.6.1.4.1.3085.3.1.3.3.5.2.1 |
csOc3PathIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. Integer32 .1.3.6.1.4.1.3085.3.1.3.3.5.2.1.1 |
csOc3PathIntervalESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.5.2.1.2 |
csOc3PathIntervalSESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.5.2.1.3 |
csOc3PathIntervalCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.5.2.1.4 |
csOc3PathIntervalUASsThe counter associated with the number of Unavailable Seconds encountered by a Path in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.5.2.1.5 |
csOc3PathIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.3.5.2.1.6 |
csOc3PathIntervalFCsThe counter associated with the number of failure counts encountered by a Path in a particular 15-minute interval in the past 24 hours.ro PerfIntervalCount .1.3.6.1.4.1.3085.3.1.3.3.5.2.1.7 |
csOc3PathDayTableThe SONET/SDH Path Day table. SEQUENCE OF CsOc3PathDayEntry .1.3.6.1.4.1.3085.3.1.3.3.5.3 |
csOc3PathDayEntryAn entry in the SONET/SDH Path Day table. CsOc3PathDayEntry .1.3.6.1.4.1.3085.3.1.3.3.5.3.1 |
csOc3PathDayESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Path for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.3.1.1 |
csOc3PathDaySESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.3.1.2 |
csOc3PathDayCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Path for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.3.1.3 |
csOc3PathDayUASsThe counter associated with the number of Unavailable Seconds encountered by a Path for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.3.1.4 |
csOc3PathDayFCsThe counter associated with the number of failure counts encountered by a Path for the day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.3.1.5 |
csOc3PathPrevDayTableThe SONET/SDH Path Previous Day table. SEQUENCE OF CsOc3PathPrevDayEntry .1.3.6.1.4.1.3085.3.1.3.3.5.4 |
csOc3PathPrevDayEntryAn entry in the SONET/SDH Path Day table. CsOc3PathPrevDayEntry .1.3.6.1.4.1.3085.3.1.3.3.5.4.1 |
csOc3PathPrevDayESsThe counter associated with the number of Errored Seconds encountered by a SONET/SDH Path for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.4.1.1 |
csOc3PathPrevDaySESsThe counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.4.1.2 |
csOc3PathPrevDayCVsThe counter associated with the number of Coding Violations encountered by a SONET/SDH Path for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.4.1.3 |
csOc3PathPrevDayUASsThe counter associated with the number of Unavailable Seconds encountered by a Path for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.4.1.4 |
csOc3PathPrevDayFCsThe counter associated with the number of failure counts encountered by a Path for the previous day.ro PerfCurrentCount .1.3.6.1.4.1.3085.3.1.3.3.5.4.1.5 |
csOrionOc3FarEndPath OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.6 |
csOrionOc3PosStats OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.7 |
csOc3PosStatsTableThe OC3/POS statistics counter table. SEQUENCE OF CsOc3PosStatsEntry .1.3.6.1.4.1.3085.3.1.3.3.7.1 |
csOc3PosStatsEntryAn entry in the OC3/POS statistics counter table. CsOc3PosStatsEntry .1.3.6.1.4.1.3085.3.1.3.3.7.1.1 |
csOc3PosRcvBytesThe counter associated with the number of bytes written to receive FIFO.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.1 |
csOc3PosRcvFramesThe counter indicates the number of frames successfully received in a 15 minute interval.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.2 |
csOc3PosRcvAbortedFramesThe counter indicates the number of aborted frames received.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.3 |
csOc3PosRcvFrameFCSErrorThe counter indicates the number of received frames with FCS error.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.4 |
csOc3PosRcvFrameMinPacketErrorThe counter indicates the number of received frames violating the minimal packet length.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.5 |
csOc3PosRcvFrameMaxPacketErrorThe counter indicates the number of received frames violating the maximum packet length.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.6 |
csOc3PosSentBytesThe counter indicates the number of bytes trasmitted.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.7 |
csOc3PosSentFramesThe counter indicates the number of frames trasmitted.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.8 |
csOc3PosSentFrameUserAbortedThe counter indicates the number of transmit frames aborted by the user.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.9 |
csOc3PosSentFrameUnderrunAbortedThe counter indicates the number of transmit frames aborted due to FIFO underrun.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.7.1.1.10 |
csOrionOc3PosStatsEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.7.2 |
csOrionOc3AtmStats OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.3.8 |
csOc3AtmCurrentStatsTableThe OC3 ATM statistics counter table. SEQUENCE OF CsOc3AtmCurrentStatsEntry .1.3.6.1.4.1.3085.3.1.3.3.8.1 |
csOc3AtmCurrentStatsEntryAn entry in the OC3 statistics counter table. CsOc3AtmCurrentStatsEntry .1.3.6.1.4.1.3085.3.1.3.3.8.1.1 |
csOc3AtmCurrentTransmittedCellsThe counter indicates the number of transmitted cells at OC3-ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.1.1.1 |
csOc3AtmCurrentRecievedCellsThe counter indicates the number of received cells at OC3-ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.1.1.2 |
csOc3AtmCurrentIdleCellsThe counter indicates the number of idle cells at OC3-ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.1.1.3 |
csOc3AtmCurrentCorrectedHECThe counter indicates the number of corrected HEC cells at OC3-ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.1.1.4 |
csOc3AtmCurrentUnCorrectedHECThe counter indicates the number of uncorrected HEC cells at OC3-ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.1.1.5 |
csOc3AtmCurrentStatsTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.8.2 |
csOc3AtmIntervalStatsTableThe OC3 ATM Interval statistics counter table. SEQUENCE OF CsOc3AtmIntervalStatsEntry .1.3.6.1.4.1.3085.3.1.3.3.8.3 |
csOc3AtmIntervalStatsEntryAn entry in the OC3 ATM Interval statistics counter table. CsOc3AtmIntervalStatsEntry .1.3.6.1.4.1.3085.3.1.3.3.8.3.1 |
csOc3AtmIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. Integer32 .1.3.6.1.4.1.3085.3.1.3.3.8.3.1.1 |
csOc3AtmIntervalTransmittedCellsThe counter indicates the number of transmitted cells at OC3-ATM interface in a given interval numberro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.3.1.2 |
csOc3AtmIntervalRecievedCellsThe counter indicates the number of received cells at OC3-ATM interface in a given interval numberro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.3.1.3 |
csOc3AtmIntervalIdleCellsThe counter indicates the number of idle cells at OC3-ATM interface in a given interval numberro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.3.1.4 |
csOc3AtmIntervalCorrectedHECThe counter indicates the number of corrected HEC cells at OC3-ATM interface in a given interval numberro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.3.1.5 |
csOc3AtmIntervalUnCorrectedHECThe counter indicates the number of uncorrected HEC cells at OC3-ATM interface in a given interval numberro Counter64 .1.3.6.1.4.1.3085.3.1.3.3.8.3.1.6 |
csOc3AtmIntervalValidDataThis variable indicates if the data for this interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.3.8.3.1.7 |
csOc3AtmIntervalStatsTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.3.3.8.4 |
csOrionFrInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.4 |
csFrDlcmiTableThe Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. SEQUENCE OF CsFrDlcmiEntry .1.3.6.1.4.1.3085.3.1.3.4.1 |
csFrDlcmiEntryThe Parameters for a particular Data Link Connection Management Interface. CsFrDlcmiEntry .1.3.6.1.4.1.3085.3.1.3.4.1.1 |
csFrDlcmiSlotThis table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Slot. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.4.1.1.1 |
csFrDlcmiModuleThis table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the moduel, the port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.4.1.1.2 |
csFrDlcmiPortThis table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Port. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.4.1.1.3 |
csFrDlcmiChannelThis table entry configures Frame Relay Dlcmi-specific parameters for a single interface. The interface is identified by the slot its blade resides in, the physical port on that blade that contains the interface, and (if applicable) the specific DS3 channel on that port. This object is used to identify the Channel. If there is no DS3 channel (or unchannelized), this object should have the value 0. Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.4.1.1.4 |
csFrDlcmiStateThis variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.5 |
csFrDlcmiAddressThis variable states which address format is in use on the Frame Relay interface.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.6 |
csFrDlcmiAddressLenThis variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the address including the control portion.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.7 |
csFrDlcmiPollingIntervalThis is the number of seconds between successive status enquiry messages.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.1.1.8 |
csFrDlcmiFullEnquiryIntervalNumber of status enquiry intervals that pass before issuance of a full status enquiry message.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.1.1.9 |
csFrDlcmiErrorThresholdThis is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.1.1.10 |
csFrDlcmiMonitoredEventsThis is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.1.1.11 |
csFrDlcmiMaxSupportedVCsThe maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond badValuero DLCI .1.3.6.1.4.1.3085.3.1.3.4.1.1.12 |
csFrDlcmiMulticastThis indicates whether the Frame Relay interface is using a multicast service.roobsolete Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.13 |
csFrDlcmiStatusThis indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.14 |
csFrDlcmiIfTypeThis indicates the type of interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.15 |
csFrDlcmiBECNFlowControlThis object enables or disables the BECN flow control.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.16 |
csFrDlcmiInjectionManagement.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.17 |
csFrDlcmiName.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.4.1.1.18 |
csFrDlcmiLmiDlciThe DLCI of the LMI for this interface.rw DLCI .1.3.6.1.4.1.3085.3.1.3.4.1.1.19 |
csFrDlcmiDceN392LMI error threshold. For DCE IF Type. This is the maximum number of unanswered unreceived Status Enquiries the equipment shall accept before declaring the interface down.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.1.1.20 |
csFrDlcmiDceN393LMI monitored event count. For DCE IF Type. This is the number of status polling intervals over which the error threshold is counted.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.1.1.21 |
csFrDlcmiDceT392LMI monitored event count. For DCE IF Type. This indicates the expected number of seconds between heartbeat polls.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.1.1.22 |
csFrDlcmiAsyncEnabled.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.1.1.23 |
csFrCircuitTableA table containing information about specific Data Link Connections (DLC) or virtual circuits. SEQUENCE OF CsFrCircuitEntry .1.3.6.1.4.1.3085.3.1.3.4.2 |
csFrCircuitEntryThe information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in csFrCircuitCreationTime. CsFrCircuitEntry .1.3.6.1.4.1.3085.3.1.3.4.2.1 |
csFrCircuitSubIfThe identifier for this Frame Relay Circuit. This corresponds to the 'subinterface' entered via the CLI. Integer32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.1 |
csFrCircuitDlciThe Data Link Connection Identifier for this virtual circuit. Note, this impelemtation supports only values between 16 and 1023 (inclusive).rw DLCI .1.3.6.1.4.1.3085.3.1.3.4.2.1.2 |
csFrCircuitStateIndicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of csFrCircuitRowStatus.rwobsolete Enumeration .1.3.6.1.4.1.3085.3.1.3.4.2.1.3 |
csFrCircuitReceivedFECNsNumber of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.4 |
csFrCircuitReceivedBECNsNumber of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.5 |
csFrCircuitSentFramesThe number of frames sent from this virtual circuit since it was created.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.6 |
csFrCircuitSentOctetsThe number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.7 |
csFrCircuitReceivedFramesNumber of frames received over this virtual circuit since it was created.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.8 |
csFrCircuitReceivedOctetsNumber of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.9 |
csFrCircuitCreationTimeThe value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.4.2.1.10 |
csFrCircuitLastTimeChangeThe value of sysUpTime when last there was a change in the virtual circuit statero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.4.2.1.11 |
csFrCircuitCommittedBurstThis variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.12 |
csFrCircuitExcessBurstThis variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.13 |
csFrCircuitThroughputThroughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst size and throughput are both non-zero, the measurement interval, T, is T=csFrCircuitCommittedBurst/csFrCircuitThroughput. If the configured committed burst size and throughput are both zero, the measurement interval, T, is T=csFrCircuitExcessBurst/ifSpeed.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.14 |
csFrCircuitMulticastThis indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed toroobsolete Enumeration .1.3.6.1.4.1.3085.3.1.3.4.2.1.15 |
csFrCircuitTypeIndication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.roobsolete Enumeration .1.3.6.1.4.1.3085.3.1.3.4.2.1.16 |
csFrCircuitDiscardsThe number of inbound frames dropped because of format errors, or because the VC is inactive.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.17 |
csFrCircuitReceivedDEsNumber of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.18 |
csFrCircuitSentDEsNumber of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.2.1.19 |
csFrCircuitRemoteIpAddressThe remote IP address mapped to this VC.rwobsolete IpAddress .1.3.6.1.4.1.3085.3.1.3.4.2.1.20 |
csFrCircuitRowStatusThis object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.4.2.1.21 |
csFrCircuitOperStatusThe operational status of this circuit.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.4.2.1.22 |
csFrCircitFwdDlciTypeIndication of whether the DLCI corresponding to the forward link of this DLCI, is a Frame Relay DLCI or Frame over IP DLCI. Depending on this the csFrCircuitFwdLink object is interpreted differently. When setting a csFrCircuitFwdLink object, this object also must be set.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.2.1.23 |
csFrCircuitFwdLinkThe forwarding link of this DLCI. This is a switching parameters for intra blade and inter-blade switching. It takes the following format: If csFrCircitFwdDlciType is frDlci byte #0 to #3 : Slot number (csFrDlcmiSlot) byte #4 to #7 : Port number (csFrDlcmiPort) byte #8 to #11 : Channel number (csFrDlcmiChannel, zero for unchannelized blade) byte #12 to #15: DLCI number (csFrCircuitDlci) If csFrCircitFwdDlciType is froipDlci byte #0 to #3 : VPN Id (csOrionGlobalVPNIndex) byte #4 to #7 : VR Id (csOrionVPNVRouterIndex) byte #8 to #11 : Transport Id (csOrionFRoIPTransportPeer) byte #12 to #15: DLCI number (csFroIPCircuitDlci) NOTE: all zero indicates that this DLCI is not connected to any link.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.3.4.2.1.24 |
csFrCircuitRatePoliceThis object enables or disables ingress traffic rate-policing. Ingress rate-policing is controlled by the values configured for csFrCircuitThroughput, csFrCircuitCommitedBurst and CsFrCircuitExcessBurst. If the number of bits received in the measurement interval is less than or equal to the committed burst size, the frame is forwared for further processing. If the number of bits received in the measurement interval is greater than the commited burst size but less than the sum of commited burst size and excess burst size, the DE bit is set in the frame and then forwared for further processing. If the number of bits received in the measurement interval is greater than the sum of commited burst size and excess burst size, the frame is dropped.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.2.1.25 |
csFrCircuitUpperProtocolThis object is used to set the upper protocol. For PPP over FR this is set to 'ppp'. NOTE: This object cannot be set to 'ip'. Only when a VI is connected to this interface that it becomes 'ip'.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.4.2.1.26 |
csFrErrTableA table containing information about Errors on the Frame Relay interface. Discontinuities in the counters contained in this table are the same as apply to the ifEntry associated with the Interface. SEQUENCE OF CsFrErrEntry .1.3.6.1.4.1.3085.3.1.3.4.3 |
csFrErrEntryThe error information for a single frame relay interface. CsFrErrEntry .1.3.6.1.4.1.3085.3.1.3.4.3.1 |
csFrErrTypeThe type of error that was last seen on this interface: receiveShort: frame was not long enough to allow demultiplexing - the address field was incomplete, or for virtual circuits using Multiprotocol over Frame Relay, the protocol identifier was missing or incomplete. receiveLong: frame exceeded maximum length configured for this interface. illegalAddress: address field did not match configured format. unknownAddress: frame received on a virtual circuit which was not active or administratively disabled. dlcmiProtoErr: unspecified error occurred when attempting to interpret link maintenance frame. dlcmiUnknownIE: link maintenance frame contained an Information Element type which is not valid for the configured link maintenance protocol. dlcmiSequenceErr: link maintenance frame contained a sequence number other than the expected value. dlcmiUnknownRpt: link maintenance frame contained a Report Type Information Element whose value was not valid for the configured link maintenance protocol. noErrorSinceReset: no errors have been detected since the last cold start or warm start.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.4.3.1.1 |
csFrErrDataAn octet string containing as much of the error packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all header and demultiplexing information.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.3.4.3.1.2 |
csFrErrTimeThe value of sysUpTime at which the error was detected.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.4.3.1.3 |
csFrErrFaultsThe number of times the interface has gone down since it was initialized.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.3.1.4 |
csFrErrFaultTimeThe value of sysUpTime at the time when the interface was taken down due to excessive errors. Excessive errors is defined as the time when a DLCMI exceeds the frDlcmiErrorThreshold number of errors within frDlcmiMonitoredEvents. See FrDlcmiEntry for further details.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.4.3.1.5 |
csFrDlcmiStatTableA table containing information about the statistics on every DLCMI. SEQUENCE OF CsFrDlcmiStatEntry .1.3.6.1.4.1.3085.3.1.3.4.4 |
csFrDlcmiStatEntryThe statistics information for a single frame relay interface. CsFrDlcmiStatEntry .1.3.6.1.4.1.3085.3.1.3.4.4.1 |
csFrDlcmiStatStatusEnquiriesNumber of times the Status Equiry is sent.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.1 |
csFrDlcmiStatFullStatusEnquiriesNumber of times the Full Status Equiry is sent.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.2 |
csFrDlcmiStatStatusResponsesNumber of times the Status Response is received.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.3 |
csFrDlcmiStatFullStatusResponsesNumber of times the Full Status Response is received.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.4 |
csFrDlcmiStatAsyncUpdatesNumber of times the Asyn Update is made.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.5 |
csFrDlcmiStatUnknownMessagesNumber of times the Unknown Messages is encountered.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.6 |
csFrDlcmiStatLostSequencesNumber of times the Lost Sequence is encountered.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.7 |
csFrDlcmiStatMissingResponsesNumber of times the Missing Response is encountered.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.8 |
csFrDlcmiStatLocalSequenceNumberThe local sequence number.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.9 |
csFrDlcmiStatNetSequenceNumberThe network sequence number.ro Counter32 .1.3.6.1.4.1.3085.3.1.3.4.4.1.10 |
csAtmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.5 |
csAtmInterfaceConfTableThis table contains ATM local interface configuration parameters, one entry per ATM interface port. SEQUENCE OF CsAtmInterfaceConfEntry .1.3.6.1.4.1.3085.3.1.3.5.1 |
csAtmInterfaceConfEntryThis list contains ATM interface configuration parameters and state variables. CsAtmInterfaceConfEntry .1.3.6.1.4.1.3085.3.1.3.5.1.1 |
csAtmInterfaceConfSlotIndexThis object identifies the blade to which this ATM Port is attached. Together with csAtmInterfaceConfModuleIndex, csAtmInterfaceConfPortIndex, it uniquely identifies a physical port. Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.1 |
csAtmInterfaceConfModuleIndexThis object identifies the module to which this ATM Port is attached. Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.2 |
csAtmInterfaceConfPortIndexThis object identifies the blade to which this ATM Port is attached. Together with csAtmInterfaceConfSlotIndex, it uniquely identifies a physical port. Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.3 |
csAtmInterfaceConfMaxVpcsThe maximum number of VPCs (PVPCs and SVPCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVPCs and SVPCs) ranges from 0 to 256 only.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.4 |
csAtmInterfaceConfMaxVccsThe maximum number of VCCs (PVCCs and SVCCs) supported at this ATM interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.5 |
csAtmInterfaceConfVpcsThe number of VPCs (PVPC, Soft PVPC and SVPC) currently in use at this ATM interface. It includes the number of PVPCs and Soft PVPCs that are configured at the interface, plus the number of SVPCs that are currently established at the interface. At the ATM UNI, the configured number of VPCs (PVPCs and SVPCs) can range from 0 to 256 only.ro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.6 |
csAtmInterfaceConfVccsThe number of VCCs (PVCC, Soft PVCC and SVCC) currently in use at this ATM interface. It includes the number of PVCCs and Soft PVCCs that are configured at the interface, plus the number of SVCCs that are currently established at the interface.ro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.7 |
csAtmInterfaceConfMaxActiveVpiBitsThe maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.8 |
csAtmInterfaceConfCurrentMaxVpiBitsThe maximum number of VPI Bits that may currently be used at this ATM interface. The value is the minimum of AtmInterfaceMaxActiveVpiBits, and the AtmInterfaceMaxActiveVpiBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VPI Bits that can be used on the interface, then the value of this object must equal AtmInterfaceMaxActiveVpiBits.ro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.9 |
csAtmInterfaceConfMaxActiveVciBitsThe maximum number of active VCI bits configured for use at this ATM interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.10 |
csAtmInterfaceConfCurrentMaxVciBitsThe maximum number of VCI Bits that may currently be used at this ATM interface. The value is the minimum of AtmInterfaceMaxActiveVciBits, and the AtmInterfaceMaxActiveVciBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VCI Bits that can be used on the interface, then the value of this object must equal AtmInterfaceMaxActiveVciBits.ro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.1.1.11 |
csAtmInterfaceConfIlmiVpiThe VPI value of the VCC supporting the ILMI at this ATM interface. If the values of AtmInterfaceIlmiVpi and AtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.rw AtmVpIdentifier .1.3.6.1.4.1.3085.3.1.3.5.1.1.12 |
csAtmInterfaceConfIlmiVciThe VCI value of the VCC supporting the ILMI at this ATM interface. If the values of AtmInterfaceIlmiVpi and AtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.rw AtmVcIdentifier .1.3.6.1.4.1.3085.3.1.3.5.1.1.13 |
csAtmInterfaceConfMyIfNameA textual name of this interface. if this system is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. if this interface does not have a textual name, the value of this object is a zero length strin.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.5.1.1.14 |
csAtmInterfaceConfMyNeighbourIpAddressThe IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.rw IpAddress .1.3.6.1.4.1.3085.3.1.3.5.1.1.15 |
csAtmInterfaceConfMyNeighbourIfNameThe textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.rw DisplayString .1.3.6.1.4.1.3085.3.1.3.5.1.1.16 |
csAtmInterfaceConfIlmiVersionAn indication of the latest version of the ATM Forum ILMI specification that is supported on this ATM interface. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. If this object is not present, a version of the ILMI earlier than 4.0 is supported.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.5.1.1.17 |
csAtmInterfaceConfUniTypeThe type of the ATM device, either public or private.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.5.1.1.18 |
csAtmInterfaceConfUniVersionAn indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. if this value is not present, a version of the UNI earlier than 3.1 is supported. If the peer IME's value of this object is the same as, or earlier than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise compatibility of the two IMEs cannot be assumed.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.5.1.1.19 |
csAtmInterfaceConfAdminStatusThe object used to enable/disable this ATM interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.1.1.20 |
csAtmInterfaceConfOperStatusThe operational status of this ATM interface.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.5.1.1.21 |
csAtmInterfaceConfIlmiControlThe object is used to enable/disable the ILMI on this ATM interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.1.1.22 |
csAtmInterfaceConfIlmiStatusThe object is used to monitor the status of the ILMI on this ATM interface.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.5.1.1.23 |
csAtmInterfaceConfEvLogLevelThis object is used to set the level for details for event logs for ATM port. This value will not be applied to VCCs. Events with level higher than this object will not be logged.rw EvLogLevel .1.3.6.1.4.1.3085.3.1.3.5.1.1.24 |
csAtmInterfaceConfEvLogAreaThis object is used to set the area of event logs for ATM Port. This value will not be applied to VCCs. Events which area is not specified in this object will not be logged.rw EvLogArea .1.3.6.1.4.1.3085.3.1.3.5.1.1.25 |
csAtmConnTableThis table can be used to creata virtual connections in this ATM interface. SEQUENCE OF CsAtmConnEntry .1.3.6.1.4.1.3085.3.1.3.5.2 |
csAtmConnEntryThis list contains ATM virtual connections. CsAtmConnEntry .1.3.6.1.4.1.3085.3.1.3.5.2.1 |
csAtmConnChannelIndexChannel ID of this ATM connection. Currently, it will always be 0. Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.1 |
csAtmConnSubIfIndexThe identifier for this ATM connection. This corresponds to the 'subinterface' entered via the CLI. Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.2 |
csAtmConnVpiVirtual Path ID of this connection. This is mandatory in creating a connection.rw AtmVpIdentifier .1.3.6.1.4.1.3085.3.1.3.5.2.1.3 |
csAtmConnVciVirtual Channel ID of this connection. This is mandatory in creating a connection.rw AtmVcIdentifier .1.3.6.1.4.1.3085.3.1.3.5.2.1.4 |
csAtmConnTypeThe ATM service category. NOTE : The type other(1) is not implemented for write operation. Setting to this type will default to ubr(6).rw AtmServiceCategory .1.3.6.1.4.1.3085.3.1.3.5.2.1.5 |
csAtmConnPvcTyperw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.6 |
csAtmConnPCRPeak Cell rate for the connection.rw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.5.2.1.7 |
csAtmConnSCRSustain Cell rate for the connection. NOTE: This value is applicable for VBR service categories.rw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.5.2.1.8 |
csAtmConnMBSMaximum Burst Size for the connection. NOTE: This value is applicable for VBR service categories.rw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.5.2.1.9 |
csAtmConnICRInital Cell rate for the connection. NOTE: This value is applicable for ABR service category.rw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.5.2.1.10 |
csAtmConnMCRMinimum Cell rate for the connection. NOTE: This value is applicable for ABR service category.rw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.3.5.2.1.11 |
csAtmConnOamLoopbackThis object is used to enable/disable the loopback.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.12 |
csAtmConnOamContinuityThis object is used to enable/disable the continuity.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.13 |
csAtmConnAal5CpcsTransmitSduSizeAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the transmit direction of this VCC. NOTE : For now, a maximum of 1744 is supported.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.14 |
csAtmConnAal5CpcsReceiveSduSizeAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the receive direction of this VCC.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.15 |
csAtmConnEncapTypeThe use of call control.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.16 |
csAtmConnKindThe use of call control.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.17 |
csAtmConnAdminStatusThis object is instanciated only for a connection which terminates a VCC (i.e., one which is NOT cross-connected to other connections). Its value specifies the desired administrative state of the connection.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.18 |
csAtmConnOperStatusThe current operational status of the connection.ro OperStatus .1.3.6.1.4.1.3085.3.1.3.5.2.1.19 |
csAtmConnRowStatusThis object is used to create, delete or modify a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.5.2.1.20 |
csAtmConnUpperProtocolThis object is used to set the upper protocol. For PPP over ATM this is set to 'ppp'. For PPP over Ethernet this is set to 'pppoe'. NOTE: This object cannot be set to 'ip'. Only when a VI is connected to this interface that it becomes 'ip'.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.21 |
csAtmConnArpAgingTimeAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies aging time (in minutes) for ARP Cache entries and it takes effect when ATM ARP module restarts.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.22 |
csAtmConnArpCacheSizeAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies the size of ARP Cache and it takes effect when ATM ARP module restarts.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.23 |
csAtmConnEthernetMacAddressAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports Bridging format. This objects specifies the active MAC Address on the VCC end-point.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.5.2.1.24 |
csAtmConnEvLogLevelThis object is used to set the level for details for event logs forATM VCC. Events with level higher than this object will not be logged.rw EvLogLevel .1.3.6.1.4.1.3085.3.1.3.5.2.1.25 |
csAtmConnEvLogAreaThis object is used to set the area of event logs for ATM VCC. Events which area is not specified in this object will not be logged.rw EvLogArea .1.3.6.1.4.1.3085.3.1.3.5.2.1.26 |
csAtmConnInArpAgingTimeAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies aging time (in minutes) for InARP entries and it takes effect immediately. Also this object is active when IP protocol is enabled on VCrw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.27 |
csAtmConnInArpManageVcAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies whether PVC services to layer 3 is managed by InArp status in addition to PVC opertional status and it takes immediate effect . Also this object is active when IP protocol is enabled on VCrw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.28 |
csAtmConnInArpManageStatusAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies the PVC InARP status and thus will be used to control services to l3, when AtmConnInArpManageVc is enabled. Also this object is meaning full when IP protocol is enabled on VCro Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.29 |
csAtmConnInArpAdminStatusAn instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 Encapsulation type supports LLC-SNAP format. This objects specifies whether InARP services can be enabled or disbaled. Operation on this object takes immediate effect. Also this object is active when IP protocol is enabled on VCrw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.30 |
csAtmConnOamLoopbackRetryPvcUpCountOAM retry count before declaring the PVC up.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.31 |
csAtmConnOamLoopbackRetryPvcUpRetryDelayOAM retry Frequency in seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.32 |
csAtmConnOamLoopbackRetryPvcUpAgeOAM Time to wait before transmitting OAM requests for UP status(in minutes)rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.33 |
csAtmConnOamLoopbackRetryPvcDownCountOAM retry count before declaring the PVC down.rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.34 |
csAtmConnOamLoopbackRetryPvcDownRetryDelayOAM retry Frequency in seconds (for down status).rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.35 |
csAtmConnOamLoopbackRetryPvcDownAgeOAM Time to wait before transmitting OAM requests (in minutes)rw Integer32 .1.3.6.1.4.1.3085.3.1.3.5.2.1.36 |
csAtmConnOamLoopbackManageVcThis object is used to enable/disable the oam loopback manage vc.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.37 |
csAtmConnOamLoopbackStatusThe current loopback status of the connection.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.5.2.1.38 |
csAtmConnDynamicArpCacheTable SEQUENCE OF CsAtmConnDynamicArpCacheEntry .1.3.6.1.4.1.3085.3.1.3.5.3 |
csAtmConnDynamicArpCacheEntryThis list contains Dynamic ARP Entries for ATM virtual connections. CsAtmConnDynamicArpCacheEntry .1.3.6.1.4.1.3085.3.1.3.5.3.1 |
csAtmConnDynamicArpCacheIpAddressThis object holds IP address associated with MAC Address. IpAddress .1.3.6.1.4.1.3085.3.1.3.5.3.1.1 |
csAtmConnDynamicArpCacheMacAddressThis object holds MAC address associated with IP Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.5.3.1.2 |
csAtmConnDynamicArpCacheRowStatusThis object is used to delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.5.3.1.3 |
csAtmConnStaticArpCacheTable SEQUENCE OF CsAtmConnStaticArpCacheEntry .1.3.6.1.4.1.3085.3.1.3.5.4 |
csAtmConnStaticArpCacheEntryThis list contains Static (configured) ARP Entries for ATM virtual connections. CsAtmConnStaticArpCacheEntry .1.3.6.1.4.1.3085.3.1.3.5.4.1 |
csAtmConnStaticArpCacheIpAddressThis object holds IP address associated with MAC Address. IpAddress .1.3.6.1.4.1.3085.3.1.3.5.4.1.1 |
csAtmConnStaticArpCacheMacAddressThis object holds MAC address associated with IP Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.5.4.1.2 |
csAtmConnStaticArpCacheRowStatusThis object is used to create, delete or modify a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.5.4.1.3 |
csAtmConnIpAddressTable SEQUENCE OF CsAtmConnIpAddressEntry .1.3.6.1.4.1.3085.3.1.3.5.5 |
csAtmConnIpAddressEntryThis list contains ARP Entries for ATM virtual connections. CsAtmConnIpAddressEntry .1.3.6.1.4.1.3085.3.1.3.5.5.1 |
csAtmConnIpAddressIpAddressThis object holds IP address for which ATM ARP module responds positively. IpAddress .1.3.6.1.4.1.3085.3.1.3.5.5.1.1 |
csAtmConnIpAddressRowStatusThis object is used to create, delete or modify a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.3.5.5.1.2 |
csAtmConnIpAddressTypeThis object specifies the type of IP address, i.e.,NON-PROXY-IP, or PROXY IP.ro Enumeration .1.3.6.1.4.1.3085.3.1.3.5.5.1.3 |
csAtmConnIpAddressTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.6 |
csAtmInterfaceConfStatsTable SEQUENCE OF CsAtmInterfaceConfStatsEntry .1.3.6.1.4.1.3085.3.1.3.5.7 |
csAtmInterfaceConfStatsEntryThis list contains statistics entries for ATM interfaces. CsAtmInterfaceConfStatsEntry .1.3.6.1.4.1.3085.3.1.3.5.7.1 |
csAtmInterfaceConfTransmittedPacketsThe counter indicates the number of packets transmitted on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.1 |
csAtmInterfaceConfTransmittedBytesThe counter indicates the number of bytes transmitted on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.2 |
csAtmInterfaceConfTransmitErrorsThe counter indicates the number of packets dropped due to transmit path errors on ATM interface caused by buffer operation failures, and invalid protocol typesro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.3 |
csAtmInterfaceConfTransmitOperationallyDownThe counter indicates the number of packets dropped in transmit path on ATM interface, because of inactive PVCsro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.4 |
csAtmInterfaceConfTransmitQueueFullThe counter indicates the number of packets dropped due to transmit queue is full on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.5 |
csAtmInterfaceConfTransmitBadLengthThe counter indicates the number of packets dropped in transmit path due to bad length on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.6 |
csAtmInterfaceConfTransmitIncompleteThe counter indicates the number of packets transmitted incompletely on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.7 |
csAtmInterfaceConfTransmitVcNotOpenedThe counter indicates the number of packets dropped in transmit path due to non-existing VCCs on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.8 |
csAtmInterfaceConfReceivedPacketsThe counter indicates the number of packets Received on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.9 |
csAtmInterfaceConfReceivedBytesThe counter indicates the number of bytes Received on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.10 |
csAtmInterfaceConfReceivedEncapsulationErrorsThe counter indicates the number of packets dropped due to LLC/SNAP errors in Receive path on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.11 |
csAtmInterfaceConfReceivedUnknownProtocolErrorsThe counter indicates the number of packets dropped due to unknown protocols errors in Receive path on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.12 |
csAtmInterfaceConfReceivedGenericErrorsThe counter indicates the number of packets dropped due to Receive path errors on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.13 |
csAtmInterfaceConfReceivedOperationallyDownThe counter indicates the number of packets dropped in Receive path on ATM interface, because of inactive PVCsro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.14 |
csAtmInterfaceConfReceivedDroppedPktsThe counter indicates the number of received packets dropped due to buffer allocation on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.15 |
csAtmInterfaceConfReceivedBufferAllocationFailThe counter indicates the number of received packets dropped due to buffer allocation on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.16 |
csAtmInterfaceConfReceivedBadVcThe counter indicates the number of received packets dropped due to non-existing VCs on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.17 |
csAtmInterfaceConfReceivedBadAalTypeThe counter indicates the number of received packets dropped due to unsupported AAL type on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.18 |
csAtmInterfaceConfReceivedBadAalLengthThe counter indicates the number of received packets dropped due to bad PDU length on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.19 |
csAtmInterfaceConfReceivedCRCErrorsThe counter indicates the number of received packets dropped due to CRC errors on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.20 |
csAtmInterfaceConfReceivedDroppedCellsThe counter indicates the number of cells dropped on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.21 |
csAtmInterfaceConfReceivedInvalidVpiVciCellsThe counter indicates the number of received cells dropped due to invalid VPI/VCI values on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.22 |
csAtmInterfaceConfTransmittedOamLoopBackRequestsThe counter indicates the number of OAM loop-back requests transmitted on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.23 |
csAtmInterfaceConfReceivedOamLoopBackResponsesThe counter indicates the number of OAM loop-back responses received on ATM interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.24 |
csAtmInterfaceConfRespondedOAMLoopBackRequestsThe counter indicates the number of responded OAM loop-back requests on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.25 |
csAtmInterfaceConfOamLoopBackTransmitFailThe counter indicates the number of OAM loop-back requests/responses failed to transmit on ATM/driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.26 |
csAtmInterfaceConfTransmitCollisionsThe counter indicates the number of packets (data and OAM) aborted due collisions at driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.27 |
csAtmInterfaceConfTransmittedCellsThe counter indicates the number of total number of cells transmitted on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.28 |
csAtmInterfaceReceivedBadAAL5HdrTrailersThe counter indicates the number of packets (OAM & data) failed in reassemble path in ATM/driver interface due bad AAL5 trailer lengthro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.29 |
csAtmInterfaceReceivedCellsThe counter indicates the total number of received on open channels at ATM/driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.7.1.30 |
csAtmInterfaceConfStatsTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.8 |
csAtmConnStatsTable SEQUENCE OF CsAtmConnStatsEntry .1.3.6.1.4.1.3085.3.1.3.5.9 |
csAtmConnStatsEntryThis list contains statistics entries for ATM interfaces. CsAtmConnStatsEntry .1.3.6.1.4.1.3085.3.1.3.5.9.1 |
csAtmConnTransmittedPacketsThe counter indicates the number of packets transmitted on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.1 |
csAtmConnTransmittedBytesThe counter indicates the number of bytes transmitted on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.2 |
csAtmConnTransmitErrorsThe counter indicates the number of packets dropped due to transmit path errors on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.3 |
csAtmConnTransmitOperationallyDownThe counter indicates the number of packets dropped in transmit path on ATM VC, because of inactivityro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.4 |
csAtmConnTransmitQueueFullThe counter indicates the number of packets dropped due to transmit queue is full on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.5 |
csAtmConnTransmitBadLengthThe counter indicates the number of packets dropped in transmit path due to bad length on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.6 |
csAtmConnReceivedPacketsThe counter indicates the number of packets Received on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.7 |
csAtmConnReceivedBytesThe counter indicates the number of bytes Received on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.8 |
csAtmConnReceivedEncapsulationErrorsThe counter indicates the number of packets dropped due to encapsulation errors in Receive path errors on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.9 |
csAtmConnReceivedUnknownProtocolErrorsThe counter indicates the number of packets dropped due to unknown protocol in r eceive path errors on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.10 |
csAtmConnReceivedGenericErrorsThe counter indicates the number of packets dropped due to Receive path generic errors on ATM VC. These errors includes, when protocol is none, or any other operations failed while accessing LLC/SNAP headerro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.11 |
csAtmConnReceivedOperationallyDownThe counter indicates the number of packets dropped in Receive path on ATM VC, because of inactivityro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.12 |
csAtmConnReceivedDroppedPktsThe counter indicates the number of received packets dropped due to buffer allocation on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.13 |
csAtmConnReceivedBufferAllocationFailThe counter indicates the number of received packets dropped due to buffer allocation on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.14 |
csAtmConnReceivedBadAalTypeThe counter indicates the number of received packets dropped due to unsupported AAL type on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.15 |
csAtmConnReceivedBadAalLengthThe counter indicates the number of received packets dropped due to bad PDU length on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.16 |
csAtmConnReceivedCRCErrorsThe counter indicates the number of received packets dropped due to CRC errors on Driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.17 |
csAtmConnTransmittedOamLoopBackRequestsThe counter indicates the number of OAM loop-back requests transmitted on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.18 |
csAtmConnReceivedOamLoopBackResponsesThe counter indicates the number of OAM loop-back responses received on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.19 |
csAtmConnRespondedOAMLoopBackRequestsThe counter indicates the number of responded OAM loop-back requests on driver interfacero Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.20 |
csAtmConnOamLoopBackTransmitFailThe counter indicates the number of OAM loop-back requests failed to transmit on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.21 |
csAtmConnTransmittedArpRequestsThe counter indicates the number of transmitted ARP requests on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.22 |
csAtmConnTransmittedArpResponsesThe counter indicates the number of transmitted ARP responses on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.23 |
csAtmConnReceivedArpRequestsThe counter indicates the number of received ARP requests on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.24 |
csAtmConnReceivedArpResponsesThe counter indicates the number of received ARP responses on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.25 |
csAtmConnUnRespondedArpRequestsThe counter indicates the number of received ARP requests for which, no ARP responses send due to non-existing IP address on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.26 |
csAtmConnArpErrorsThe counter indicates the number of ARP requests/responses failed due other reasons, on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.27 |
csAtmConnTransmittedCellsThe counter indicates the total number of data cells transmitted on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.28 |
csAtmConnTransmitDroppedPktsThe counter indicates the total number of packets (OAM/RAW/data) packets dropped or aborted on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.29 |
csAtmConnReceivedCellsThe counter indicates the total number of cells received on ATM VCro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.9.1.30 |
csAtmConnStatsTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.10 |
csAtmConnInArpStatisticsTable SEQUENCE OF CsAtmConnInArpStatisticsEntry .1.3.6.1.4.1.3085.3.1.3.5.11 |
csAtmConnInArpStatisticsEntryThis list contains ARP Entries for ATM virtual connections. CsAtmConnInArpStatisticsEntry .1.3.6.1.4.1.3085.3.1.3.5.11.1 |
csAtmConnInArpInReqsThe number of InATMARP requests received on the PVC.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.11.1.1 |
csAtmConnInArpOutReqsThe number of InATMARP requests sent on the PVC.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.11.1.2 |
csAtmConnInArpInRepliesThe number of InATMARP replies received on the PVC.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.11.1.3 |
csAtmConnInArpOutRepliesThe number of InATMARP replies sent on the PVC.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.11.1.4 |
csAtmConnInArpInvalidInReqsThe number of Invalid InATMARP requests received on the PVC.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.11.1.5 |
csAtmConnInArpInvalidOutReqsThe number of InATMARP requests for which replies did not received on the PVC.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.11.1.6 |
csAtmConnInArpGenericErrorsThe number of generic errors encountered while processing InATMARP requests and replies on the PVC.ro Counter64 .1.3.6.1.4.1.3085.3.1.3.5.11.1.7 |
csAtmConnInArpStatisticsTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.3.5.12 |
csPOSInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.3.6 |
csPosInterfaceConfTabledeprecated SEQUENCE OF CsPosInterfaceConfEntry .1.3.6.1.4.1.3085.3.1.3.6.1 |
csPosInterfaceConfEntrydeprecated CsPosInterfaceConfEntry .1.3.6.1.4.1.3085.3.1.3.6.1.1 |
csPosInterfaceConfSlotIndexThis object identifies the blade to which this POS Port is attached. Together with csPosInterfaceConfPortIndex, it uniquely identifies a physical port.deprecated Integer32 .1.3.6.1.4.1.3085.3.1.3.6.1.1.1 |
csPosInterfaceConfModuleIndexThis object identifies the specific module of this POS blade.deprecated Integer32 .1.3.6.1.4.1.3085.3.1.3.6.1.1.2 |
csPosInterfaceConfPortIndexThis object identifies the blade to which this POS Port is attached. Together with csPosInterfaceConfPortIndex, it uniquely identifies a physical port.deprecated Integer32 .1.3.6.1.4.1.3085.3.1.3.6.1.1.3 |
csPosEncapsulationThis object identifies the encapsulation format used on this Packet Over Sonet port.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.3.6.1.1.4 |
csPosAdminStatusThis object is used to enable/disable this POS interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.3.6.1.1.5 |
csPosOperStatusThis object indicates the current operational status of this POS interface.rodeprecated OperStatus .1.3.6.1.4.1.3085.3.1.3.6.1.1.6 |
csOrionVPNInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4 |
csOrionVPNGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.1 |
csOrionVPNTableA list of VPNs which belong to Orion box. SEQUENCE OF CsOrionVPNEntry .1.3.6.1.4.1.3085.3.1.4.1.1 |
csOrionVPNEntryAn entry containing management information applicable to a particular interface or management Blade. CsOrionVPNEntry .1.3.6.1.4.1.3085.3.1.4.1.1.1 |
csOrionGlobalVPNIndexA globally unique value, greater than zero, for each VPN, configured across all existing Orion boxes.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.1.1.1.1 |
csOrionVPNNameA textual string containing information about the VPN. By default this is set to 'VPN x', where x is the VPN ID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.1.1.1.2 |
csOrionVPNRadiusSvrListThis object identifies a prioritized list of RADIUS servers (from the csRadiusSvrTable) that will be used when a packet needing RADIUS services is processed. NOTE: This object has been obsoleted. Each VR has its own Radius server list. see csOrionRadiusInforwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.1.1.1.3 |
csOrionVPNDNSSvrListThis object identifies a prioritized list of DNS servers (from the csDnsSvrTable) that will be used when a packet needing DNS services is processed. NOTE: This object has been obsoleted.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.1.1.1.4 |
csOrionVPNRowStatusA row status type for the VPN.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.1.1.1.5 |
csOrionVPNOperStatusA operational status for the VPN.ro OperStatus .1.3.6.1.4.1.3085.3.1.4.1.1.1.6 |
csOrionVPNVRouterInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2 |
csOrionVrGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.1 |
csOrionVPNVRouterTableA list of Virtual Routers, configured for the VPN. SEQUENCE OF CsOrionVPNVRouterEntry .1.3.6.1.4.1.3085.3.1.4.2.1.1 |
csOrionVPNVRouterEntryAn entry containing management information applicable to a particular virtual router, configured for the VPN. CsOrionVPNVRouterEntry .1.3.6.1.4.1.3085.3.1.4.2.1.1.1 |
csOrionVPNVRouterIndexA unique value, greater than zero, for each VPN Virtual Router.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.1 |
csOrionVPNVRouterNameA textual string containing information about the Virtual Router, configured to the particular VPN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.2 |
csOrionVPNVRouterIpForwardingThe indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.3 |
csOrionVPNVRouterIpDefaultTTLThe default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.4 |
csOrionVPNVRouterIpReasmTimeoutThe maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.5 |
csOrionVPNVRouterRowStatusA row status type for the VPN Virtual Router.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.8 |
csOrionVPNVRouterOperStatusA operational status for the Virtual Router of the VPN.ro OperStatus .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.9 |
csOrionVPNVRouterLocationsThis object contains an ascii string which is used to identify possible address locations for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine (PE) ID and are integers (0..3). Specification of PE is optional. Note, this object can only be set when the Virtual Router is being created. If nothing is entered, the Resource Manager will decide where to place the Virtual Router elements. If the blade is specified but not the PE ID, the Resource Manager will decide which PE(s) to place the various Virtual Router objects on.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.10 |
csOrionVPNVRouterTypeThis identifies whether this Virtual Router is a data VR or the Control VR. Note, there can be only one control VR on the entire IPSX system and it must be located entirely on the control blade. Further, this object can only be set when the Virtual Router is being created.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.11 |
csOrionVPNVRouterIpDecTtlrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.12 |
csOrionVPNVRouterIpDsByteThis object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value. This object can be an IPv4 TOS octet: 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TOS | MBZ | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ Precedence (from RFC 791) 111 - Network Control 110 - Internetwork Control 101 - CRITIC/ECP 100 - Flash Override 011 - Flash 010 - Immediate 001 - Priority 000 - Routine TOS (from RFC 1349) 1000 -- minimize delay 0100 -- maximize throughput 0010 -- maximize reliability 0001 -- minimize monetary cost 0000 -- normal service MBZ (must be zero) is unused. Or this object can be a DS field (from RFC 2474): 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | DSCP | CU | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ DSCP: differentiated services codepoint CU: currently unused DSCP is used to select the PHB (per-hop behavior) a packet experiences at each node. It is recommended that bits 0-2 of the DSCP field be employed in a manner similar to, or subsuming, the deployed uses of the IP Precedence field of an IPv4 TOS octet to maintain some form of backward compatibility.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.13 |
csOrionVPNVRouterOperLocationsThis object contains an ascii string which is used to identify the operational address locations for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine ID and are integers (0..3).ro DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.14 |
csOrionVPNVRouterDenyPktFilterEvlogStatusIf enabled, event logs will be sent when a packet hits a packet filter on the VR or on any VI in the VR with a DENY action.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.15 |
csOrionVPNVRouterBackupPEsThis object contains an ascii string which is used to identify backup Pes for the various elements of a Virtual Router. The format of the string is 'a/x, b/y, c/z', where 'a', 'b' and 'c' denote the blade numbers and are integers (1..26); 'x', 'y' and 'z' denote the processor engine (PE) ID and are integers (0..3). Specification of PE is optional.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.16 |
csOrionVPNVRouterFailOverIf the attribute is 'true' then the the VR will be failed over to the backup PE. VR failover actually starts after the the fail-over timer has expiredrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.17 |
csOrionVPNVRouterAbortFailOverIf the attribute is 'true' then the the VR will be failed over to the backup PE. VR failover actually starts after the the fail-over timer has expiredrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.18 |
csOrionVPNVRouterFailbackToPrimaryIf the attribute is 'true' then the the VR will be failback to the Primary PE. Setting this attribute makes sense ONLY when manual VR fail-over failedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.19 |
csOrionVPNVRouterCreationTimeIf the attribute is 'true' then the the VR will be failed over to the backup PE immediately. Setting this attribute makes sense ONLY when csOrionVPNVRouterFailOver is also setro DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.20 |
csOrionVPNVRouterUpTimeIf the attribute is 'true' then the the VR will be failed over to the backup PE immediately. Setting this attribute makes sense ONLY when csOrionVPNVRouterFailOver is also setro DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.1.1.21 |
csRtgPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.1.2 |
csImpPolTableThis table is used to configure the import policies stored on a virtual router. Once configured, these policies can be applied to any routing protocol. SEQUENCE OF CsImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.1 |
csImpPolEntryEach entry contains information about a single import policy. CsImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1 |
csImpPolIdThis object identifies a specific Import Policy entry. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.1 |
csImpPolGenAclIdThe identifier of General Access List entry that this Policy uses. The value -1 represents a wildcard for this Import Policy parameter.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.2 |
csImpPolPeerASUsed by BGP, the autonomous system number of the remote peer. The value -1 represents a wildcard for this Import Policy parameter.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.3 |
csImpPolHomeASUsed by BGP, the home autonomous system number of the BGP system originating the update. The value -1 represents a wildcard for this Import Policy parameter.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.4 |
csImpPolOriginUsed by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or unknown (the origin of the route cannot be determined). any (signal policy module to ignore this value) The value egp is deprecated.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.5 |
csImpPolActionThe action to take on routes that match this policy.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.6 |
csImpPolPreferenceThe preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.7 |
csImpPolRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.8 |
csImpPolBgpCommunity1The BGP Community parameter 1. Refer to RFC1997. The following values are not allowed in the configuration: 0 through 0x0000FFFF and 0xFFFF0000 through 0xFFFFFFFF.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.1.1.9 |
csExpPolTableThis table is used to configure the export policies stored on a virtual router. Once configured, these policies can be applied to any routing protocol. SEQUENCE OF CsExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.2 |
csExpPolEntryEach entry contains information about a single import policy. CsExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1 |
csExpPolIdThis object identifies a specific Export Policy entry. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.1 |
csExpPolGenAclIdThe identifier of General Access List entry that this Policy uses. The value -1 represents a wildcard for this Import Policy parameter.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.2 |
csExpPolPeerASThe target system's autonomous system number. The value -1 represents a wildcard for this Import Policy parameter.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.3 |
csExpPolProtocolThe protocol that has added the route to the routing table.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.4 |
csExpPolEgpASIf a route was added via EGP, this object is the AS number of the EGP peer. The value -1 represents a wildcard for this Import Policy parameter.rwobsolete Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.5 |
csExpPolBgpASIf a route was added via BGP, this object is the AS number of the BGP peer. The value -1 represents a wildcard for this Import Policy parameter.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.6 |
csExpPolExtRteTagIf the route was added via OSPF External, this is the eter The value -1 represents a wildcard for this Import Policy parameter.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.7 |
csExpPolRipIpThe value 0.0.0.0 represents a wildcard for this Import Policy parameter.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.8 |
csExpPolRipNbrIpThe value 0.0.0.0 represents a wildcard for this Import Policy parameter.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.9 |
csExpPolActionThe action to perform on packets matching this policy.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.10 |
csExpPolMetricThe metric to assign to packets matching this policy. The value -1 indicates this parameter has not been set.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.11 |
csExpPolRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.12 |
csExpPolBgpCommunity1The BGP Community parameter 1. Refer to RFC1997. The following values are not allowed in the configuration: 0 through 0x0000FFFF and 0xFFFF0000 through 0xFFFFFFFF. But the following values are allowed within that range: 0xFFFF FF01 (NO-EXPORT) 0xFFFF FF02 (NO-ADVERTISE) 0xFFFF FF03 (NO-EXPORT-SUB) Note that this value can not be set to 0 unless csExpPolBgpCommunity2 is set to 0.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.13 |
csExpPolBgpCommunity2Same description as csExpPolBgpCommunity1rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.14 |
csExpPolRouteTypeRouteType to be matched when exporting ISIS/OSPF route into another protocol. ISISlevel1, ISISlevel2 and ISISlevel12 can be set if csExpPolProtocol is set to ISIS. OSPFinternal, OSPFexternal, OSPFexternal1 and OSPFexternal2 can be set if csExpPolProtocol is set to OSPFrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.15 |
csExpPolMetricTypeMetric type to be set when exporting route into a protocol. OSPFtype1 and OSPFtype2 are only applicable for OSPF. ISISinternal and ISISexternal are only applicable for ISIS.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.16 |
csExpPolLevelTo indicate where to import routes, applicable to ISIS and OSPF only. ISISlevel1, ISISlevel2, ISISlevel3 are applicable when you apply export policy for ISIS. OSPFstubarea and OSPFbackbone are applicable when you apply export policy for OSPF.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.2.1.17 |
csExpPolTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.3 |
csRtPolicyTermTableThis table is used to configure route policies. Each route policy is referred by a name 'csRtPolicyName'. A route policy consists of multiple named terms which are referred by 'csRtPolicyTermName'. A route term constitues a set of match conditions, modifiers (set attributes) and a flow action for the policy execution. SEQUENCE OF CsRtPolicyTermEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.4 |
csRtPolicyTermEntryEach entry contains information about a single policy term. The policy name along with the term name identifies an entry. CsRtPolicyTermEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1 |
csRtPolicyNameThis object identifies a specific route policy. A policy name can contain alphanumeric characters and hyphens (-). DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.1 |
csRtPolicyTermNameThis object along with the csRtPolicyName identifies a unique policy term table entry. A csRtPolicyAction table entry is also associated with a policy term. A policy term name can contain alphanumeric characters and hyphens (-). DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.2 |
csRtPolicyTermSeqNumThe sequence number of this policy term. Policy terms are evaluated in the ascending order of thier sequence numbers. If more than one term has the same sequence number then the order of their evaluation relative to each other may be abribtrary.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.3 |
csRtPolicyTermFromBgpASPathNameThe identifier for a BGP AS path regular expression. It is used to locate an AS path entry in csRtPolicyExpTable. A NULL string indicates that this object is note used in this table entry.rw DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.4 |
csRtPolicyTermFromVpnRouteTargetNamesListFlagIf the attribute is 'true' then the VPN Route Target names list is specified as a match condition. The VPN Route Target names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-vpn-route-target-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName'ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.5 |
csRtPolicyTermFromVpnSooA site-of-origin value to match the SOO of a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes Value is absolute value or in regular expression format. If this attribute is not set then it is of zero length.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.6 |
csRtPolicyTermFromVpnRdA list of route distinguisher values to match the RD of a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes Value is absolute value or in regular expression format. If this attribute is not set then it is of zero length.rw DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.7 |
csRtPolicyTermFromBgpCommNamesListFlagIf the attribute is 'true' then the BGP community names list is specified specified as a match condition. The BGP community names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-community-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName'ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.8 |
csRtPolicyTermFromBgpLocalPrefThe BGP local preference attribute. [Check ranges and default]rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.9 |
csRtPolicyTermFromBgpOriginUsed by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or incomplete (the origin of the route cannot be determined). none (signal policy module to ignore this value) The value egp is deprecated.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.10 |
csRtPolicyTermFromIntfIndexThe index of the interface from which this route was learnt. This condition should not be used for protocols which are not interface specific, eg. IBGP. The value -1 indicates that this attribute is not used.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.11 |
csRtPolicyTermFromIntfAddrThe IP address of the interface from which this route was learnt. This condition should not be used for protocols which are not interface specific, eg. IBGP. The value 0.0.0.0 represents that this attribute is not used.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.12 |
csRtPolicyTermFromIsisLevelISIS level of the route.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.13 |
csRtPolicyTermFromIsisMetricTypeISIS Metric type to match for the policy.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.14 |
csRtPolicyTermFromMetric1The route metric to match for this policy. The value -1 indicates this parameter has not been set.rw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.15 |
csRtPolicyTermFromMetric2The route metric2 to match for this policy. The value -1 indicates this parameter has not been set.rw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.16 |
csRtPolicyTermFromNbrAddrThe value 0.0.0.0 represents that this attribute is not used.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.17 |
csRtPolicyTermFromNbrGroupNameThe Name of the BGP Neighbor Grouprw DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.18 |
csRtPolicyTermFromNextHopAddrIndexThe value 0.0.0.0 represents a wildcard for this parameter.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.19 |
csRtPolicyTermFromOspfAreaThe OSPF area identifier.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.20 |
csRtPolicyTermFromOspfAreaTypeOSPF area type to match for the policy.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.21 |
csRtPolicyTermFromOspfMetricTypeOSPF metric type to match for the policy.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.22 |
csRtPolicyTermFromOspfTag1The 32-bit tag filed in OSPF external LSA packetsrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.23 |
csRtPolicyTermFromOspfTag2The 32-bit tag filed in OSPF external LSA packetsrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.24 |
csRtPolicyTermFromPolicyNamesListFlagIf the attribute is 'true' then a list of policy names is specified as a match condition. Each name in the list represents a route policy. The policy names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-policy-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.25 |
csRtPolicyTermFromPreference1The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.26 |
csRtPolicyTermFromPreference2The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.27 |
csRtPolicyTermFromPrefixNamesListFlagIf the attribute is 'true' then a list of prefix-list names is specified as a match condition. Each name in the list represents a prefix-list. The prefix names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-from-prefix-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.28 |
csRtPolicyTermFromRouteFilterFlagIf the attribute is 'true' then a list of route-filters are specified as a match condition.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.29 |
csRtPolicyTermFromProtocolThe protocol that has added the route to the routing table. Each bit within this object specifies protocol added the route. Below is a list of the protocols and their corresponding bits identifiers. options bit -------------------------------------- none 0 local 1 bgp 2 rip 4 ospf 8 static 16 isis 32 aggregate 64 vpn 128 dial-ppp 256 dial-ipsec 512 End of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.30 |
csRtPolicyTermToIsisLevelISIS level for the routing instance. This attribute is used in policies to redistribute routes into ISIS.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.31 |
csRtPolicyTermToOspfAreaTypeOSPF area type for the policy.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.32 |
csRtPolicyTermToNbrAddrThe value 0.0.0.0 represents a wildcard for this parameter.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.33 |
csRtPolicyTermToNbrGroupNameThe Name of the BGP Neighbor Grouprw DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.34 |
csRtPolicyTermActionFlagIf the attribute is 'true' then a action is specified.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.35 |
csRtPolicyTermActionBgpASPathNameThe AS Path to prepend. This object is a list of AS numbers. A NULL string indicates that this object is note used in this entry.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.36 |
csRtPolicyTermActionBgpASPathOpThe operation to perform on the associated route attribute. none: no operation is performed, i.e., the AS path attribute is not modified. prepend: prepend the route's AS path attribute with the AS path list specified by csRtPolicyTermActionBgpASPathName.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.37 |
csRtPolicyTermActionVpnRouteTargetNamesListFlagIf the attribute is 'true' then the VPN Route Target names list is specified as an action condition. The VPN Route Target names list can be accessed from csRtPolicyStrTable using the following index attributes: csRtPolicyStrType = term-action-vpn-route-target-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.38 |
csRtPolicyTermActionVpnRouteTargetOpThe operation to perform on the associated route attribute. none: no operation is performed, i.e., the route target is not modified. set: replace the route's route target with the members of route targets list specified add: add the route's route target with the members of route targets list specified subtract: remove the members of route targets list specified from route's route targetrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.39 |
csRtPolicyTermActionVpnSooOpThe operation to perform on the associated route attribute. none: no operation is performed, i.e., the site of origin is not modified. set: replace the route's site of origin with the site of origin value specified in action. delete: delete the route's site of originrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.40 |
csRtPolicyTermActionVpnSooThe site of origin to use for a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes absolute value or in regular expression format otherwise it is of zero length.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.41 |
csRtPolicyTermActionVpnRdThe route distinguisher to use for a VPN route. If this attribute is set then this attribute is a string of upto 32 bytes absolute value or in regular expression format otherwise it is of zero length.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.42 |
csRtPolicyTermActionBgpCommNamesListFlagIf the attribute is 'true' then the BGP community names list is specified as an action condition. The BGP community names list can be accessed from csRtPolicyStrTable using the the following index attributes: csRtPolicyStrType = term-action-community-names-list csRtPolicyStrName = 'csRtPolicyName/csRtPolicyTermName' csRtPolicyStrFragId =ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.43 |
csRtPolicyTermActionBgpCommOpThe operation to perform on the associated route attribute. none: no operation is performed, i.e., the community attribute is not modified. set: replace the route's community attribute with the communities specified by csRtPolicyTermActionBgpCommIndex. add: add the communities specified by csRtPolicyTermActionBgpCommIndex to the route's community attribute. subtract: remove the communities specified by csRtPolicyTermActionBgpCommIndex from the route's community attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.44 |
csRtPolicyTermActionBgpLocalPrefThe BGP local preference attribute. [Check ranges and default]rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.45 |
csRtPolicyTermActionBgpLocalPrefOpThe operation to perform on the associated route attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.46 |
csRtPolicyTermActionBgpOriginUsed by BGP, the origin type as placed in the AS path by the originator of the update. The origin could be IGP (the route was learned from an internal gateway protocol), EGP (the route was learned via an exterior gateway protocol) or incomplete (the origin of the route cannot be determined). any (signal policy module to ignore this value) The value egp is deprecated.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.47 |
csRtPolicyTermActionBgpMetricTypeBGP metric type to set for the route. none: this action object is not used internal: use the IGP metric.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.48 |
csRtPolicyTermActionMetricThe route metric to match for this policy. The value -1 indicates this parameter has not been set.rw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.49 |
csRtPolicyTermActionMetricOpThe operation to perform on the associated route attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.50 |
csRtPolicyTermActionMetric2The route metric2 to match for this policy. The value -1 indicates this parameter has not been set.rw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.51 |
csRtPolicyTermActionMetric2OpThe operation to perform on the associated route attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.52 |
csRtPolicyTermActionIsisMetricTypeISIS metric type to set for the route. Value none indicates that this action object is not used.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.53 |
csRtPolicyTermActionNextHopAddrTypeThe next hop address type. If the value is set to 'nh-address' then the IP-address specified in csRtPolicyTermActionNextHopAddr should be used. Value none indicates that this action object is not used.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.54 |
csRtPolicyTermActionNextHopAddrThe nexthop address to set for the route. This attribute is valid only if the csRtPolicyTermActionNextHopAddrType is set to 'nh-address'. If value is 0.0.0.0 then this object is not set.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.55 |
csRtPolicyTermActionOspfMetricTypeOSPF Metric type to set for the route. Value none indicates that this action object is not used.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.56 |
csRtPolicyTermActionOspfTagThe 32-bit tag filed in OSPF external LSA packetsrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.57 |
csRtPolicyTermActionOspfTagOpThe operation to perform on the associated route attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.58 |
csRtPolicyTermActionOspfTag2The 32-bit tag filed in OSPF external LSA packetsrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.59 |
csRtPolicyTermActionOspfTag2OpThe operation to perform on the associated route attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.60 |
csRtPolicyTermActionPreferenceThe preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.61 |
csRtPolicyTermActionPreferenceOpThe operation to perform on the associated route attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.62 |
csRtPolicyTermActionPreference2The preference to apply to routes that match this policy. Note, this object only applies to import policies that have a 'permit' action. The value -1 indicates this parameter has not been set.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.63 |
csRtPolicyTermActionPreference2OpThe operation to perform on the associated route attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.64 |
csRtPolicyTermActionFlowThe policy flow control actions. This action is applied after all the other action objects are processed. none: use default behavior accept: accept the route. No other terms or policies are evaluated. All other action objects in this entry are processed before this action. reject: reject the route. No other terms or policies are evaluated. Other action objects are not used in combination with it. next-term: skip to and evaluate the next term in the same policy. All other action objects in this entry are processed before this action. next-policy: skip to and evaluate the first term of the next policy. All other action objects in this entry are processed before this action.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.65 |
csRtPolicyTermActionLogFlagEnable/disable logging this policy action.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.66 |
csRtPolicyTermRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.4.1.67 |
csRtPolicyTermTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.5 |
csPolicyRouteFilterTableThis table holds policy related route filter entries. A route filter is a prefix or prefix-range with an associated action. A route filter may have action attributes associtaed with it. A route filter is identified by the isame csRtPolicyName and csRtPolicyTermName attributes constitute the route-filter list of a policy term. Route-filters within a list are processed in the ascending order of csPolicyRouteFilterSeqNum attribute if the prefix/mask are the same; otherwise the longest prefix match first rule is used. SEQUENCE OF CsPolicyRouteFilterEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.6 |
csPolicyRouteFilterEntryEach table entry contains information about a single route filter. CsPolicyRouteFilterEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1 |
csPolicyRouteFilterPrefixThe IP prefix for this route-filter entry. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.1 |
csPolicyRouteFilterPrefixLenThe prefix length for this entry. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.2 |
csPolicyRouteFilterMatchTypeThe match type for this entry. exact: the route prefix should match csPolicyRouteFilterPrefix and prefix-length should be equal to csPolicyRouteFilterPrefixLen. longer: csPolicyRouteFilterPrefix matches the route-prefix exactly and csPolicyRouteFilterPrefixLen is greater than prefix-length. orlonger: csPolicyRouteFilterPrefix matches the route-prefix exactly and csPolicyRouteFilterPrefixLen is greater than prefix-length. upto: the most significant bits of csPolicyRouteFilterPrefix and the route-prefix match for csPolicyRouteFilterPrefixLen bits; the route's prefix length is between csPolicyRouteFilterPrefixLen and csPolicyRouteFilterPrefixLen2 (inclusive). through: the following condition should match. - prefix matches csPolicyRouteFilterPrefix - prefix matches csPolicyRouteFilterPrefix2 for route's prefix length bits (most significant) - prefix length is less than or equal to csPolicyRouteFilterPrefixLen2. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.3 |
csPolicyRouteFilterPrefix2The second prefix for this entry. This is used to specify the route range. This object is valid only if csPolicyRouteFilterMatchType value is 'through'. Otherwise the value should be set to 0.0.0.0 IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.4 |
csPolicyRouteFilterPrefixLen2The second prefix length for this entry. This is used specify the prefix-length range. This object is valid only if csPolicyRouteFilterMatchType value is 'upto' or 'through'. Otherwise the value should be set to 0. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.5 |
csPolicyRouteFilterSeqNumThe sequence number of the prefix entry. The entries within a route-filter list are evaluated using the longest prefix match rule. If more than one entry have the same prefixe i.e., csPolicyRouteFilterPrefix and csPolicyRouteFilterPrefixLen match then they are evaluated in the ascending order of sequence numbers.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.6 |
csRtPolicyRouteFilterActionFlowThe policy flow control actions. This action is applied after all the other action objects are processed. none: use default behavior accept: accept the route. No other terms or policies are evaluated. All other action objects in this entry are processed before this action. reject: reject the route. No other terms or policies are evaluated. Other action objects are not used in combination with it. next-term: skip to and evaluate the next term in the same policy. All other action objects in this entry are processed before this action. next-policy: skip to and evaluate the first term of the next policy. All other action objects in this entry are processed before this action.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.7 |
csRtPolicyRouteFilterActionLogFlagEnable/disable logging this policy action.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.8 |
csPolicyRouteFilterRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.6.1.9 |
csPolicyRouteFilterTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.7 |
csRtPolicyPrefixListTableThis table holds IP prefix entries for prefix-lists. A prefix-list is a named list of IP prefixes. A prefix can be specified as an IP address and mask for exact match or can be specified as a range of IP addresses for other match conditions. Each table entry constitutes a single prefix. SEQUENCE OF CsRtPolicyPrefixListEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.8 |
csRtPolicyPrefixListEntryEach entry contains information about a single route prefix or range CsRtPolicyPrefixListEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1 |
csRtPolicyPrefixListNameThe name of the prefix-list. A name can contain alphanumeric characters and hyphens (-). DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.1 |
csRtPolicyPrefixListPrefixThe IP prefix for this entry. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.2 |
csRtPolicyPrefixListPrefixLenThe prefix length for this entry. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.3 |
csRtPolicyPrefixListMatchTypeThe match type for this entry. exact: the route prefix should match csRtPolicyPrefixListPrefix and prefix-length should be equal to csRtPolicyPrefixListPrefixLen. longer: csRtPolicyPrefixListPrefix matches the route-prefix exactly and csRtPolicyPrefixListPrefixLen is greater than prefix-length. orlonger: csRtPolicyPrefixListPrefix matches the route-prefix exactly and csRtPolicyPrefixListPrefixLen is greater than prefix-length. upto: the most significant bits of csRtPolicyPrefixListPrefix and the route-prefix match for csRtPolicyPrefixListPrefixLen bits; the route's prefix length is between csRtPolicyPrefixListPrefixLen and csRtPolicyPrefixListPrefixLen2 (inclusive). through: the following condition should match. - prefix matches csRtPolicyPrefixListPrefix - prefix matches csRtPolicyPrefixListPrefix2 for route's prefix length bits (most significant) - prefix length is less than or equal to csRtPolicyPrefixListPrefixLen2. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.4 |
csRtPolicyPrefixListPrefix2The second prefix for this entry. This is used to specify the route range. This object is valid only if csRtPolicyPrefixListMatchType value is 'through'. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.5 |
csRtPolicyPrefixListPrefixLen2The second prefix length for this entry. This is used specify the prefix-length range. This object is valid only if csRtPolicyPrefixListMatchType value is 'upto' or 'through'. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.6 |
csRtPolicyPrefixListRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.8.1.7 |
csRtPolicyPrefixListTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.9 |
csRtPolicyStrTableThis is a generic table to hold all the policy related string attributes. These could be lists of names, logical or regular expressions related to policy configuration. Eg: AS Path regular expressions, BGP community. The csRtPolicyStrType attribute holds the type of the policy string. Strings larger than 255 bytes are fragmented into 255 bytes segments with each fragment stored as a single table entry. SEQUENCE OF CsRtPolicyStrEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.10 |
csRtPolicyStrEntryEach entry contains information about a single policy string fragment. CsRtPolicyStrEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1 |
csRtPolicyStrTypeType of policy related logical or regular expression. Regular expressions are used by AS Paths and BGP communityies. Logical expressions are used to create conditional policy statements for use by import/export policies. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.1 |
csRtPolicyStrNameThe name for the policy string. A name can contain alphanumeric charachers and hyphens (-). The name is unique for a given type. DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.2 |
csRtPolicyStrDataThe policy expression.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.3 |
csRtPolicyStrRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.10.1.4 |
csRtPolicyStrTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.11 |
csRtPolicyUserTableThis table hold routing policy usage configuration for all protocols/components in the router. It is normally the import-policy/export-policy configuration statements in a protocol context. The index is specified as a {Type,Value} to account for the differences between protocols. For example, if protocol type is BGP then the index identifies also identifies the BGP peer or group for which the configuration is applicable. SEQUENCE OF CsRtPolicyUserEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.12 |
csRtPolicyUserEntryEach entry contains information about a single policy usage configuration. It represents an import-policy or export-policy statement for a ptotocol. CsRtPolicyUserEntry .1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1 |
csRtPolicyUserTypeThe route policy user type. It is the protocol configuration element using the import/export policy.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.1 |
csRtPolicyUserIndexValueThe value field is specific to each protocol user. Most protocols will be using this field. The encoding of this attruibute for protocols using it is specified below. It should be specified as defined below for the following csRtPolicyUserType values: RIP : not used OSPF : not used ISIS : not used BGP-PEER: 7-15 char ipaddress dotted-decimal string (BGPNbrAddress) BGP-GROUP: 1-32 byte peer-group name (BGPGroupName) VPN-VRF: not used VPN-VRM: not used DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.2 |
csRtPolicyUserPolicyTypeThe type of policy: import: import route policy export: export route policy vpn-access: Access policy used by a bGP-peer when a Customer VR requests a join operation.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.3 |
csRtPolicyUserPolicyStringThe list of policy names. Policies are evaluated in the order of thier apperiance in the list. This string could be a logical expression of polices if supported.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.4 |
csRtPolicyUserRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.2.12.1.5 |
csRtgPolicyEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.2.13 |
csOrionPing OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.1.3 |
csOrionPingCtl OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.1.3.1 |
csOrionPingCtlTableDefines the ping Control Table for provide, via SNMP, the capability of performing ping operations at a remote host. The results of these operations are stored in the csOrionPingResultsTable. SEQUENCE OF CsOrionPingCtlEntry .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1 |
csOrionPingCtlEntryDefines an entry in the csOrionPingCtlTable. The 3rd index, csOrionPingCtlTestName, must have the following format when used for Tunnel Keepalives: TUNNEL vi-id. CsOrionPingCtlEntry .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1 |
csOrionPingCtlTestNameThe name of the ping test. This is locally unique, within the scope of a Virtual Router. This must have the following format when used for Tunnel Keepalives: TUNNEL vi-id DisplayString .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.1 |
csOrionPingCtlTargetAddressSpecifies the host address to be used at a remote host for performing a ping operation. A value for this object MUST be set prior to transitioning its corresponding csOrionPingCtlEntry to active(1) via csOrionPingCtlRowStatus.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.2 |
csOrionPingCtlTimeOutSpecifies the time-out value, in seconds, for a remote ping operation.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.3 |
csOrionPingCtlProbeCountSpecifies the number of times to perform a ping operation at a remote host.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.4 |
csOrionPingCtlAdminStatusReflects the desired state that a csOrionPingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this csOrionPingCtlEntry. disabled(2) - Deactivate the test as defined by this csOrionPingCtlEntry. Refer to the corresponding csOrionPingResultsOperStatus to determine the operational state of the test defined by this entry.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.5 |
csOrionPingCtlFrequencyThe number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a series of ping probes. The number of probes is determined by the value of the corresponding csOrionPingCtlProbeCount object. After a single test completes the number of seconds as defined by the value of csOrionPingCtlFrequency MUST elapse before the next ping test is started. A value of 0 for this object implies that the test as defined by the corresponding entry will not be repeated.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.6 |
csOrionPingCtlTrapFilterThe value of this object is used to determine when a Ping Test fails. If the number of unanswered Ping requests within a test is greater that the value of this object within, then the test has failed.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.7 |
csOrionPingCtlRowStatusThis object allows entries to be created and deleted in the csOrionPingCtlTable. Deletion of an entry in this table results in all corresponding (same csOrionPingCtlTestName index values) csOrionPingResultsTable entries being deleted. A value MUST be specified for csOrionPingCtlTargetAddress prior to a transition to active(1) state being accepted. This object only supports the createAndGo method of row creation. Remove an entry in this table by setting its RowStatus object to destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.8 |
csOrionPingCtlSourceAddressSpecifies the Source IP address to be used when performing a ping operation. If this object has the value 0.0.0.0, the Source IP Address will be determined automatically by the IP layer.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.9 |
csOrionPingCtlLengthSpecifies the length of the data portion of the ICMP Echo Request packet.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.10 |
csOrionPingCtlTtlSpecifies the Time-To-Live value used in the IP Header when performing a ping operation. Note, if this object has the value 0, the IP layer will set the TTL value to its default.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.1.1.1.11 |
csOrionPingResults OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.1.3.2 |
csOrionPingResultsTableDefines the Ping Results Table for providing the capability of performing ping operations at a remote host. The results of these operations are stored in the csOrionPingResultsTable and the pingPastProbeTable. An entry is added to the csOrionPingResultsTable when an csOrionPingCtlEntry is started by successful transition of its csOrionPingCtlAdminStatus object to enabled(1). An entry is removed from the csOrionPingResultsTable when its corresponding csOrionPingCtlEntry is deleted. SEQUENCE OF CsOrionPingResultsEntry .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2 |
csOrionPingResultsEntryDefines an entry in the csOrionPingResultsTable. The csOrionPingResultsTable has the same indexing as the csOrionPingCtlTable in order for a csOrionPingResultsEntry to correspond to the csOrionPingCtlEntry that caused it to be created. CsOrionPingResultsEntry .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1 |
csOrionPingResultsIpTargetAddressThis objects reports the IP address associated with a csOrionPingCtlTargetAddress.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.1 |
csOrionPingResultsMinRttThe minimum ping round-trip-time (RTT) received.ro Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.2 |
csOrionPingResultsMaxRttThe maximum ping round-trip-time (RTT) received.ro Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.3 |
csOrionPingResultsAverageRttThe current average ping round-trip-time (RTT).ro Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.4 |
csOrionPingResultsProbeResponsesNumber of responses received for the corresponding csOrionPingCtlEntry and csOrionPingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.5 |
csOrionPingResultsSentProbesThe value of this object reflects the number of probes sent for the corresponding csOrionPingCtlEntry and csOrionPingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.6 |
csOrionPingResultsErrorsThe value of this object reflects the number of times errors were encountered while attempting to send a probe.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.7 |
csOrionPingResultsTimeOutsThe value of this object reflects the number of times a probe was sent and more than csOrionPingCtlTimeOut seconds was spent waiting for the response.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.8 |
csOrionPingResultsLatesThe value of this object reflects the number of times a probe was sent and a response was received more than csOrionPingCtlTimeOut seconds later. Note, responses that are marked 'late' are not reflected in the csOrionPingCtlTimeOut counter.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.9 |
csOrionPingResultsUnreachablesThe value of this object reflects the number of times a probe was sent and an ICMP Destination Unreachable message was received.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.10 |
csOrionPingResultsCurrentStatusThis object has the results of the most recently completed ping test. If no test has yet been completed, this object will have the value: unknown(1).ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.3.2.2.1.11 |
csOrionPingEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.3.3 |
csOrionTraceRoute OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.1.4 |
csOrionTraceRouteReqTableTrace Route Request Table. SEQUENCE OF CsOrionTraceRouteReqEntry .1.3.6.1.4.1.3085.3.1.4.2.1.4.1 |
csOrionTraceRouteReqEntryAn entry of Trace Route Request Table. CsOrionTraceRouteReqEntry .1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1 |
csOrionTraceRouteReqIndexThis object identifies a specific Trace Route request entry. NMSs are expected to come up with a unique ID each request. This ID will also be used to index the Trace Route result entry. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.1 |
csOrionTraceRouteReqDestAddrThe destination host for the Trace Route operation. Must be set for request to be processed.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.2 |
csOrionTraceRouteReqHopsMaximum number of hops to reach destination host.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.3 |
csOrionTraceRouteReqSrcAddrThe source host for the Trace Route operation.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.4 |
csOrionTraceRouteReqStatusThis object is used to store the status of the Trace Route request. operation. The csOrionTraceRouteResultTable should only be evaluated after this object yields opSuccess(3).ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.5 |
csOrionTraceRouteReqRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.1.4.1.1.6 |
csOrionTraceRouteResultTableTrace Route Result Table. The object csOrionTraceRouteReqStatus should be evaluated before obtaing the results from this table. SEQUENCE OF CsOrionTraceRouteResultEntry .1.3.6.1.4.1.3085.3.1.4.2.1.4.2 |
csOrionTraceRouteResultEntryAn entry of Trace Route Result Table. Each hop taken during the trace route operation corresponds to an entry in csOrionTraceRouteResultEntry. Additional 'getnext' is expected to obtain the succeeding hops. We will add objects in this table as we expose more trace route info. CsOrionTraceRouteResultEntry .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1 |
csOrionTraceRouteResultIndexThis object identifies a specific File System result entry. This index corresponds to the ID provided by NMSs on File System request. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.1 |
csOrionTraceRouteResultHopNumHop number for this result.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.2 |
csOrionTraceRouteResultRtt1This is the round trip time for the 1st probe on this hop.ro Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.3 |
csOrionTraceRouteResultRtt2This is the round trip time for the 2nd probe on this hop.ro Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.4 |
csOrionTraceRouteResultRtt3This is the round trip time for the 3rd probe on this hop.ro Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.5 |
csOrionTraceRouteResultHopAddrThe host address of this hop.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.6 |
csOrionTraceRouteResultMplsLabelStackInfoReturns mpls label stack information that was encoded in the icmp error message. The values returned in this string are formatted to include mpls-label, exp-bits, s-bit, and ttl values for the entire label stack. If the router generating icmp message does not support icmp extensions for mpls, then this string will not contain any information (null string)ro OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.1.4.2.1.7 |
csOrionTraceRouteEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.1.4.3 |
csOrionVIfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.2 |
csOrionVIfaceTableA list of Virtual Interfaces, configured for the Virtual Router. SEQUENCE OF CsOrionVIfaceEntry .1.3.6.1.4.1.3085.3.1.4.2.2.1 |
csOrionVIfaceEntryAn entry containing management information applicable to a particular virtual router, configured for the VPN. CsOrionVIfaceEntry .1.3.6.1.4.1.3085.3.1.4.2.2.1.1 |
csOrionVIfIndexA unique value, greater than zero, for each VPN Virtual Interface.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.1 |
csOrionVIfRemoteEndThis object is used to identify the entity to which this Virtual Interface maps. That is, the remote end of this Virtual Interface. The format used for this ascii-string valued object is as follows: 'V|L VPNID|SlotID/VRID|PortID/VIID|LLID' Where 'V' indicates the other end of this Virtual Interface is another Virtual Interface. 'L' indicates this Virtual Interface maps to a Logical Link. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. 'LLID' is a Logical Link ID on PortID. For example, if this Virtual Interface maps to another Virtual Interface (VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'V 4/1.2.3.4/1' If this Virtual Interface maps to Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100' If this Virtual Interface has not been mapped, this object will have the value 'DISCONNECTED'.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.4 |
csOrionVIfIpAddressThe primary IP Address assigned to this Virtual Interfacerw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.5 |
csOrionVIfIpMaskThe primary IP Address Mask assigned to this Virtual Interfacerw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.6 |
csOrionVIfBcastAddrThe value of the least-significant bit in the IP broadcast address used for sending datagrams on this Virtual Interface. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.7 |
csOrionVIfMtuThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.8 |
csOrionVIfFrameTypeThe frame type used on this Virtual Interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.9 |
csOrionVIfTypeThis indicates whether this Virtual Interface is of type public or private.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.10 |
csOrionVIfSpeedAn estimate of the interface's current bandwidth in bits per second. If the remote end of this Virtual Interface is a Logical Link, the speed is based on the Logical Link's speed and does not need to be configured. If the remote end is another Virtual Interface, the speed is based on SLA agreements and needs to be configured. NOTE: This object is currently not supported and will always contain the value 0.rw Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.11 |
csOrionVIfLastChangeThe value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.12 |
csOrionVIfCryptoMapNameA Crypto Map name for the Virtual Interface.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.13 |
csOrionVIfRowStatusA row status type for the Virtual Interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.14 |
csOrionVIfOperStatusA operational status for the Virtual Iface.ro OperStatus .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.15 |
csOrionVIfRateLimitNumBytesThe number of bytes that may be forwarded on this interface in the interval specified by 'csOrionVIfRateLimitInterval'. A value of 0 indicates that no rate-limiting is done. When this field is specified, 'csOrionVIfRateLimit- Interval' must also be specified.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.16 |
csOrionVIfRateLimitIntervalThe interval, in milliseconds, over which the number of bytes forwared over this interface is measured when rate-limiting is being done. The rate-limit interval is always a multiple of 10. This field has no meaning when 'csOrionVIfRate LimitNumBytes' is '0'. When 'csOrionVIfRateLimit- NumBytes' is specified, this field must also be specified.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.17 |
csOrionVIfRateLimitRateLong term data throughput, in bytes per second, that the VI commits to support under normal network conditions.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.18 |
csOrionVIfRateLimitBurstSizeThe largest burst of data above the commited rate that will be allowed temporarily by the VI, even if it exceeds the maximum rate. This amount of traffic will be allowed only temporarily; on average, the traffice source need to be within the committed rate.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.19 |
csOrionVIfRemIpAddressThe remote IP Address assigned to this Virtual Interfacerw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.20 |
csOrionVIfRemIpAddressTypeIf value is configured, it means csOrionVIfRemIpAddress is configured , else, it is dynamically learned.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.21 |
csOrionVIfMtuOperationalOperational size of the largest datagram which can be sent/received on the interface, specified in octets.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.2.1.1.22 |
csOrionViStatsTableA list of Virtual Interfaces Statistics SEQUENCE OF CsOrionViStatsEntry .1.3.6.1.4.1.3085.3.1.4.2.2.2 |
csOrionViStatsEntryA Set of statistics for a single Virtual Interface. CsOrionViStatsEntry .1.3.6.1.4.1.3085.3.1.4.2.2.2.1 |
csOrionViStatsInOctetsThe total number of octets received on the interface, including framing characters.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.1 |
csOrionViStatsInUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.2 |
csOrionViStatsInNUcastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a non-unicast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.3 |
csOrionViStatsInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.4 |
csOrionViStatsInErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.5 |
csOrionViStatsInUnknownProtosThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.6 |
csOrionViStatsOutOctetsThe total number of octets transmitted out of the interface, including framing characters.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.7 |
csOrionViStatsOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.8 |
csOrionViStatsOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a non-unicast address at this sub-layer, including those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.9 |
csOrionViStatsOutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.10 |
csOrionViStatsOutErrorsThe number of outbound packets that could not be transmitted because of errors.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.11 |
csOrionViStatsRateLimitTxBytesSubmittedWhen rate limiting is enabled, the number of transmit bytes submitted...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.12 |
csOrionViStatsRateLimitTxPktsSubmittedWhen rate limiting is enabled, the number of transmit packets submitted...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.13 |
csOrionViStatsRateLimitTxBytesDroppedWhen rate limiting is enabled, the number of transmit bytes dropped...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.14 |
csOrionViStatsRateLimitTxPktsDroppedWhen rate limiting is enabled, the number of transmit packets dropped...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.15 |
csOrionViStatsRateLimitRxBytesSubmittedWhen rate limiting is enabled, the number of receive packets submitted...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.16 |
csOrionViStatsRateLimitRxPktsSubmittedWhen rate limiting is enabled, the number of receive packets submitted...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.17 |
csOrionViStatsRateLimitRxBytesDroppedWhen rate limiting is enabled, the number of receive packets dropped...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.18 |
csOrionViStatsRateLimitRxPktsDroppedWhen rate limiting is enabled, the number of receive packets dropped...ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.19 |
csOrionViStatsRateLimitTimeElapsedThe number of seconds that have elapsed since the beginning of the current rate-limiting measurement period.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.2.2.1.20 |
csOrionGreConfigTableThe GRE Tunneling configuration table. SEQUENCE OF CsOrionGreConfigEntry .1.3.6.1.4.1.3085.3.1.4.2.2.3 |
csOrionGreConfigEntryAn entry containing configuration information applicable to a GRE Tunnel associated with this Virtual Interface. CsOrionGreConfigEntry .1.3.6.1.4.1.3085.3.1.4.2.2.3.1 |
csOrionGreKeyEnableThis object is used to enable/disable the GRE Key. When this object is disable, csOrionGreKey has no meaningrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.3.1.1 |
csOrionGreKeyThe value of a key carried in the GRE header.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.2.3.1.2 |
csOrionGreSequenceThis object is used to enable/disable the sequencing info carried in a GRE header.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.3.1.3 |
csOrionGreCheckSumThis object is used to enable/disable the checksum mechanism for this GRE Tunnel.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.3.1.4 |
csOrionGreAdminStatusThis object controls whether the GRE Tunnel is to be created or not.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.3.1.5 |
csOrionGreStatsTableThe GRE Tunneling Statistics table. SEQUENCE OF CsOrionGreStatsEntry .1.3.6.1.4.1.3085.3.1.4.2.2.4 |
csOrionGreStatsEntryAn entry containing statistics information applicable to a GRE Tunnel associated with this Virtual Interface. CsOrionGreStatsEntry .1.3.6.1.4.1.3085.3.1.4.2.2.4.1 |
csOrionGreStatsKeyErrorsThe total number of packets with GRE Key errors received on this GRE tunnel.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.2.4.1.1 |
csOrionGreStatsSequenceErrorsThe total number of packets with out of sequence received on this GRE tunnel.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.2.4.1.2 |
csOrionGreStatsUnknownProtoThe number of packets with unknown protocols received on this GRE tunnel.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.2.4.1.3 |
csOrionGreStatsHeaderErrorsThe total number of packets with header error received on this GRE tunnel.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.2.4.1.4 |
csDot1dBaseBridgeTableA list of Virtual Bridges, configured for the Virtual Router. SEQUENCE OF CsDot1dBaseBridgeEntry .1.3.6.1.4.1.3085.3.1.4.2.2.5 |
csDot1dBaseBridgeEntryAn entry containing information applicable to a bridged VI of a VR. CsDot1dBaseBridgeEntry .1.3.6.1.4.1.3085.3.1.4.2.2.5.1 |
csDot1dBaseBridgeAddressThe MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. Note: This is used as the MAC address for this VB.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.2.5.1.1 |
csDot1dBaseNumPortsThe number of ports controlled by this bridging entity.ro INTEGER .1.3.6.1.4.1.3085.3.1.4.2.2.5.1.2 |
csDot1dTpLearnedEntryDiscardsThe total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.2.5.1.3 |
csDot1dTpAgingTimeThe timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.2.5.1.4 |
csDot1dBaseBridgeEntryRowStatusA row status type for the csDot1dBaseBridge Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.2.5.1.5 |
csDot1dTpFdbTableA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. SEQUENCE OF CsDot1dTpFdbEntry .1.3.6.1.4.1.3085.3.1.4.2.2.6 |
csDot1dTpFdbEntryInformation about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. CsDot1dTpFdbEntry .1.3.6.1.4.1.3085.3.1.4.2.2.6.1 |
csDot1dTpFdbAddressA unicast MAC address for which the bridge has forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.2.6.1.1 |
csDot1dTpFdbPortEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port to this object whenever it is learned even addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).ro INTEGER .1.3.6.1.4.1.3085.3.1.4.2.2.6.1.2 |
csDot1dTpFdbSubPortEither the value '0', or the port number of the subport on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen.ro INTEGER .1.3.6.1.4.1.3085.3.1.4.2.2.6.1.3 |
csDot1dTpFdbStatusThe status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.6.1.4 |
csDot1dPortTable. SEQUENCE OF CsDot1dPortEntry .1.3.6.1.4.1.3085.3.1.4.2.2.7 |
csDot1dPortEntryInformation about a specific unicast MAC address for which the bridge has some forwarding and (or) filtering information. CsDot1dPortEntry .1.3.6.1.4.1.3085.3.1.4.2.2.7.1 |
csDot1dPortIndex. INTEGER .1.3.6.1.4.1.3085.3.1.4.2.2.7.1.1 |
csDot1dPortRemoteEndThis object is used to identify the entity to which this Virtual Interface maps. That is, the remote end of this Virtual Interface. The format used for this ascii-string valued object is as follows: 'V|L|P|T VPNID|SlotID/VRID|PortID/VIID/ConnID/TLSID|LLID' Where 'V' indicates the other end of this Virtual Interface is another Virtual Interface. 'L' indicates this Virtual Interface maps to a Logical Link. P indicates pseudo wire. T indicates TLS. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. ConnID refers to pseudo wire connection ID. TLSID refers to the TLS domain ID for pseudo wires. 'LLID' is a Logical Link ID on PortID. For example, if this Virtual Interface maps to another Virtual Interface (VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'V 4/1.2.3.4/1' If this Virtual Interface maps to Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100' If this Virtual Interface maps to pseudo wire 100 on VPN 4 VR 1.2.3.4: P 4/1.2.3.4/100 If this Virtual Interface maps to TLS 100 on VPN 4 VR 1.2.3.4: T 4/1.2.3.4/100rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.2.7.1.2 |
csDot1dPortType.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.7.1.3 |
csDot1dPortStatus.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.2.7.1.4 |
csDot1dPortEntryRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.2.7.1.5 |
csOrionIp OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.3 |
csOrionVPNVRouterIpStatsTableThe table of IP related statistics for each Virtual Router. SEQUENCE OF CsOrionVPNVRouterIpStatsEntry .1.3.6.1.4.1.3085.3.1.4.2.3.1 |
csOrionVPNVRouterIpStatsEntryThe addressing information for one of this Orion's IP addresses. CsOrionVPNVRouterIpStatsEntry .1.3.6.1.4.1.3085.3.1.4.2.3.1.1 |
csOrionVPNVRouterIpInReceivesThe total number of input datagrams received from interfaces, including those received in error.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.1 |
csOrionVPNVRouterIpInHdrErrorsThe number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.2 |
csOrionVPNVRouterIpInAddrErrorsThe number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.3 |
csOrionVPNVRouterIpForwDatagramsThe number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this Counter32 will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.4 |
csOrionVPNVRouterIpInUnknownProtosThe number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.5 |
csOrionVPNVRouterIpInDiscardsThe number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.6 |
csOrionVPNVRouterIpInDeliversThe total number of input datagrams successfully delivered to IP user-protocols (including ICMP).ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.7 |
csOrionVPNVRouterIpOutRequestsThe total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.8 |
csOrionVPNVRouterIpOutDiscardsThe number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.9 |
csOrionVPNVRouterIpOutNoRoutesThe number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.10 |
csOrionVPNVRouterIpReasmReqdsThe number of IP fragments received which needed to be reassembled at this entity.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.11 |
csOrionVPNVRouterIpReasmOKsThe number of IP datagrams successfully re- assembled.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.12 |
csOrionVPNVRouterIpReasmFailsThe number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.13 |
csOrionVPNVRouterIpFragOKsThe number of IP datagrams that have been successfully fragmented at this entity.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.14 |
csOrionVPNVRouterIpFragFailsThe number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.15 |
csOrionVPNVRouterIpFragCreatesThe number of IP datagram fragments that have been generated as a result of fragmentation at this entity.ro Counter64 .1.3.6.1.4.1.3085.3.1.4.2.3.1.1.16 |
csOrionVPNVRouterIpAddrTableThe table of addressing information relevant to Orion's IP addresses. SEQUENCE OF CsOrionVPNVRouterIpAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.3.2 |
csOrionVPNVRouterIpAddrEntryThe addressing information for one of this Orion's IP addresses. CsOrionVPNVRouterIpAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.3.2.1 |
csOrionVPNVRouterIpAdEntAddrThe IP address to which this entry's addressing information pertains. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.2.1.1 |
csOrionVPNVRouterIpAdEntIfIndexThe index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.2.1.2 |
csOrionVPNVRouterIpAdEntNetMaskThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.2.1.3 |
csOrionVPNVRouterIpAdEntBcastAddrThe value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.2.1.4 |
csOrionVPNVRouterIpAdEntReasmMaxSizeThe size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.2.1.5 |
csOrionVPNVRouterIpAdEntRowStatusThis object is used to add a row to the IP address table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.3.2.1.6 |
csOrionVPNVRouterIpAdEntOperStatusThis object is used to get the current operational status of this row in the IP address table.ro OperStatus .1.3.6.1.4.1.3085.3.1.4.2.3.2.1.7 |
csOrionVPNVRouterIpRouteTableThe table of addressing information relevant to Orion's IP addresses. SEQUENCE OF CsOrionVPNVRouterIpRouteEntry .1.3.6.1.4.1.3085.3.1.4.2.3.3 |
csOrionVPNVRouterIpRouteEntryThe addressing information for one of this Orion's IP addresses. CsOrionVPNVRouterIpRouteEntry .1.3.6.1.4.1.3085.3.1.4.2.3.3.1 |
csOrionVPNVRouterIpRouteDestThe destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.1 |
csOrionVPNVRouterIpRouteMaskIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the csOrionVPNVRouterIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the csOrionVPNVRouterIpRouteMask by determining whether the value of the correspondent csOrionVPNVRouterIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the csOrionVPNVRouterIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.2 |
csOrionVPNVRouterIpRouteTosThe policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.3 |
csOrionVPNVRouterIpRouteNextHopThe IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.4 |
csOrionVPNVRouterIpRouteIfIndexThe index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.5 |
csOrionVPNVRouterIpRouteTypeThe type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.6 |
csOrionVPNVRouterIpRouteProtoThe routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.7 |
csOrionVPNVRouterIpRouteAgeThe number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.8 |
csOrionVPNVRouterIpRouteInfoA reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's csOrionVPNVRouterIpRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.9 |
csOrionVPNVRouterIpRouteNextHopASThe Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.10 |
csOrionVPNVRouterIpRouteMetric1The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.11 |
csOrionVPNVRouterIpRouteMetric2An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.12 |
csOrionVPNVRouterIpRouteMetric3An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.13 |
csOrionVPNVRouterIpRouteMetric4An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.14 |
csOrionVPNVRouterIpRouteMetric5An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.15 |
csOrionVPNVRouterIpRouteRowStatusA row status type for the VPN Virtual Router.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.16 |
csOrionVPNVRouterIpRouteOperStatusA operational status for the Virtual Router of the VPN.ro OperStatus .1.3.6.1.4.1.3085.3.1.4.2.3.3.1.17 |
csOrionVPNVRouterIpNetToMediaTableThe table of addressing information relevant to Orion's IP addresses. SEQUENCE OF CsOrionVPNVRouterIpNetToMediaEntry .1.3.6.1.4.1.3085.3.1.4.2.3.4 |
csOrionVPNVRouterIpNetToMediaEntryThe addressing information for one of this Orion's IP addresses. CsOrionVPNVRouterIpNetToMediaEntry .1.3.6.1.4.1.3085.3.1.4.2.3.4.1 |
csOrionVPNVRouterIpNetToMediaIfIndexThe interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.4.1.1 |
csOrionVPNVRouterIpNetToMediaPhysAddressThe media-dependent `physical' address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.3.4.1.2 |
csOrionVPNVRouterIpNetToMediaNetAddressThe IpAddress corresponding to the media- dependent `physical' address. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.4.1.3 |
csOrionVPNVRouterIpNetToMediaTypeThe type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the csOrionVPNVRouterIpNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant csOrionVPNVRouterIpNetToMediaType object.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.4.1.4 |
csOrionIpLocalAddrPoolTableThis table contains pools of IP addresses. Clients can dynamically take addresses from a pool as they need them (and return them when finished). SEQUENCE OF CsOrionIpLocalAddrPoolEntry .1.3.6.1.4.1.3085.3.1.4.2.3.5 |
csOrionIpLocalAddrPoolEntryEach entry represents a single pool of IP addresses. CsOrionIpLocalAddrPoolEntry .1.3.6.1.4.1.3085.3.1.4.2.3.5.1 |
csOrionIpLocalAddrPoolNameThe name of this address pool. This is used to identify a specific address pool. DisplayString .1.3.6.1.4.1.3085.3.1.4.2.3.5.1.1 |
csOrionIpLocalAddrPoolStartRangeThe start of the range of IP addresses in this pool.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.5.1.2 |
csOrionIpLocalAddrPoolEndRangeThe end of the range of IP addresses in this pool.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.5.1.3 |
csOrionIpLocalAddrPoolRowStatusThe RowStatus object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.3.5.1.4 |
csOrionVPNVRouterManagedIpRouteTableThe table of addressing information relevant to Orion's managed IP addresses. SEQUENCE OF CsOrionVPNVRouterManagedIpRouteEntry .1.3.6.1.4.1.3085.3.1.4.2.3.6 |
csOrionVPNVRouterManagedIpRouteEntryThe addressing information for one of this Orion's managed IP addresses. CsOrionVPNVRouterManagedIpRouteEntry .1.3.6.1.4.1.3085.3.1.4.2.3.6.1 |
csOrionVPNVRouterManagedIpRouteOwnerThe owner/manager of this route. The well known route examples for managed routes are static and generated route managers which manage the routes of the respective types. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.1 |
csOrionVPNVRouterManagedIpRouteDestThe destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.2 |
csOrionVPNVRouterManagedIpRouteMaskIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the csOrionVPNVRouterManagedIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the csOrionVPNVRouterManagedIpRouteMask by determining whether the value of the correspondent csOrionVPNVRouterManagedIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the csOrionVPNVRouterManagedIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.3 |
csOrionVPNVRouterManagedIpRouteTosThe policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.4 |
csOrionVPNVRouterManagedIpRouteNextHopThe IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) IpAddress .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.5 |
csOrionVPNVRouterManagedIpRouteIfIndexThe index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.6 |
csOrionVPNVRouterManagedIpRouteTypeThe type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. reject (2) refers to a route which, if matched, discards the message as unreachable. An ICMP unreachable message is sent to the originator of the packet. discard (1001) refers to the case where an ICMP message is not sent to the originator. These route types are used by protocols as a means of correctly aggregating routes.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.7 |
csOrionVPNVRouterManagedIpRouteProtoThe routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.8 |
csOrionVPNVRouterManagedIpRouteAgeIf the route is added to the routing table, this field indicates the number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.9 |
csOrionVPNVRouterManagedIpRouteInfoA reference to MIB definitions specific to the particular routing protocol/owner which is responsi- ble for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.10 |
csOrionVPNVRouterManagedIpRouteNextHopASThe Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. When this object is unknown or not relevant its value should be set to zero.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.11 |
csOrionVPNVRouterManagedIpRouteMetric1The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol/owner specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.12 |
csOrionVPNVRouterManagedIpRouteMetric2An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.13 |
csOrionVPNVRouterManagedIpRouteMetric3An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.14 |
csOrionVPNVRouterManagedIpRouteMetric4An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.15 |
csOrionVPNVRouterManagedIpRouteMetric5An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's csOrionVPNVRouterManagedIpRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.16 |
csOrionVPNVRouterManagedIpRoutePreference1The primary preference value for this route. The route preference value which is also referred to as the Adminstrative Distance is used for selecting a route when multiple routes from different routing protocols exist. The route with a lower preference value is preferred. Valid range is 1 through 255.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.17 |
csOrionVPNVRouterManagedIpRoutePreference2The secondary preference value for this route. The route preference value which is also referred to as the Adminstrative Distance is used for selecting a route when multiple routes from different routing protocols exist. The route with a lower preference value is preferred. Valid range is 1 through 255.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.18 |
csOrionVPNVRouterManagedIpRouteColor1The primary color value for this route. The color is used a finer grain preference value. It should be applied for route select if preference1 and preference2 values match.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.19 |
csOrionVPNVRouterManagedIpRouteColor2The secondary color value for this route. The color is used a finer grain preference value. It should be applied for route select if preference1 and preference2 values match.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.20 |
csOrionVPNVRouterManagedIpRouteActiveOptionAdditional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. active (2) routes are removed from the routing and forwarding table if they become inactive. passive (3) routes remain installed in the routing and forwarding tables it the route becomes inactive. They are marked with reject next-hops when they are inactive.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.21 |
csOrionVPNVRouterManagedIpRouteInstallOptionAdditional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. install (2) routes are eligibled to be installed into the roting and forwarding tables if selected. no-install (3) routes are not considered for selection of active routes and hence not installed in the forwarding table.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.22 |
csOrionVPNVRouterManagedIpRouteAdvertiseOptionAdditional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. readvertise (2) routes are eligibled to be readvertised by by other routing protocols if the route is active. no-readvertise (3) routes are not considered for readverisement by other protocols.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.23 |
csOrionVPNVRouterManagedIpRouteRetainOptionAdditional information for managed routes which is included with the route when it is installed in the routing table. unspecified (1) implies the default option for the route protocol should be used. retain (2) routes are retained in the forwarding table if the route manager shuts down. no-retain (3) routes are removed from the routing table if the route manager shuts down.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.24 |
csOrionVPNVRouterManagedIpRouteRowStatusA row status type for the VPN Virtual Router.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.25 |
csOrionVPNVRouterManagedIpRouteOperStateThe operational state of this route. The state is ON if the route is selecetd to the IP forwarding table. Otherwise, the operational state is OFF.ro OperState .1.3.6.1.4.1.3085.3.1.4.2.3.6.1.26 |
csOrionIpEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.3.7 |
csOrionOspf OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.4 |
csOspfConf OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.4.1 |
csOspfGeneralTableInformation describing the configured parame- ters and cumulative statistics of the router's attached areas. SEQUENCE OF CsOspfGeneralEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.1 |
csOspfGeneralEntryInformation describing the configured parame- ters and cumulative statistics of one of the router's attached areas. CsOspfGeneralEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1 |
csOspfRouterIdA 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.rw RouterID .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.1 |
csOspfAdminStatThe administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF process is active on the Virtual Router. 'disabled' disables it on all interfaces on the Virtual Router.rw Status .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.2 |
csOspfVersionNumberThe current version number of the OSPF protocol is 2.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.3 |
csOspfAreaBdrRtrStatusA flag to note whether this router is an area border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.4 |
csOspfASBdrRtrStatusA flag to note whether this router is config- ured as an Autonomous System border router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.5 |
csOspfExternLsaCountThe number of external (LS type 5) link-state advertisements in the link-state database.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.6 |
csOspfExternLsaCksumSumThe 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.7 |
csOspfTOSSupportThe router's support for type-of-service rout- ing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.8 |
csOspfOriginateNewLsasThe number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.9 |
csOspfRxNewLsasThe number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.10 |
csOspfExtLsdbLimitThe maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches csOspfExtLsdbLimit, the router enters Overflow- State. The router never holds more than csOspfExtLsdbLimit non-default AS-external-LSAs in its database. csOspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).rw Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.11 |
csOspfMulticastExtensionsA Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.12 |
csOspfExitOverflowIntervalThe number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.rw PositiveInteger .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.13 |
csOspfDemandExtensionsThe router's support for demand routing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.14 |
csOspfGeneralEntryRowStatusA row status type for the OSPF General Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.15 |
csOspfSpfDelayThe time delay between an OSPF topology change and an SPF calculation.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.16 |
csOspfSpfHoldThe time between two consecutive SPF calculations.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.17 |
csOspfRefBwThe reference bandwidth used to calculate the default interface metric.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.18 |
csOspfPrefIntThe route preference given to a route internal to an Autonomous System.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.19 |
csOspfPrefExtThe route preference given to a route external to an Autonomous System.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.4.1.1.1.20 |
csOspfAreaTableInformation describing the configured parame- ters of the router's attached areas. SEQUENCE OF CsOspfAreaEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.2 |
csOspfAreaEntryInformation describing the configured parame- ters and cumulative statistics of one of the router's attached areas. CsOspfAreaEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1 |
csOspfAreaIdA 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.1 |
csOspfAreaNameA descriptive name for this area.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.2 |
csOspfImportAsExternThe area's support for importing AS external link- state advertisements.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.3 |
csOspfSpfRunsThe number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.4 |
csOspfAreaBdrRtrCountThe total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.5 |
csOspfAsBdrRtrCountThe total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.6 |
csOspfAreaLsaCountThe total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.7 |
csOspfAreaLsaCksumSumThe 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.8 |
csOspfAreaSummaryThe variable csOspfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.9 |
csOspfAreaAuthTypeThe authentication type specified for this area.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.10 |
csOspfAreaRowStatusA row status type for the OSPF Area Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.11 |
csOspfAreaOperStatusA operational status for the OSPF Area Table.ro OperStatus .1.3.6.1.4.1.3085.3.1.4.2.4.1.2.1.12 |
csOspfStubAreaTableThe set of metrics that will be advertised by a default Area Border Router into a stub area. SEQUENCE OF CsOspfStubAreaEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.3 |
csOspfStubAreaEntryThe metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. CsOspfStubAreaEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1 |
csOspfStubAreaIdThe 32 bit identifier for the Stub Area. On creation, this can be derived from the in- stance. AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.1 |
csOspfStubTOSThe Type of Service associated with the metric. On creation, this can be derived from the instance. TOSType .1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.2 |
csOspfStubMetricThe metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the inter- faces to other areas.rw BigMetric .1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.3 |
csOspfStubStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.4 |
csOspfStubMetricTypeThis variable displays the type of metric ad- vertised as a default route.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.3.1.5 |
csOspfLsdbTableThe OSPF Process's Link State Database. SEQUENCE OF CsOspfLsdbEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.4 |
csOspfLsdbEntryA single Link State Advertisement. CsOspfLsdbEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1 |
csOspfLsdbAreaIdThe 32 bit identifier of the Area from which the LSA was received.ro AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.1 |
csOspfLsdbTypeThe type of the link state advertisement. Each link state type has a separate advertise- ment format.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.2 |
csOspfLsdbLsidThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.3 |
csOspfLsdbRouterIdThe 32 bit number that uniquely identifies the originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.4 |
csOspfLsdbSequenceThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.5 |
csOspfLsdbAgeThis field is the age of the link state adver- tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.6 |
csOspfLsdbChecksumThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.7 |
csOspfLsdbAdvertisementThe entire Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.4.1.4.1.8 |
csOspfHostTableThe list of Hosts, and their metrics, that the router will advertise as host routes. SEQUENCE OF CsOspfHostEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.5 |
csOspfHostEntryA metric to be advertised, for a given type of service, when a given host is reachable. CsOspfHostEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1 |
csOspfHostIpAddressThe IP Address of the Host. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.1 |
csOspfHostTOSThe Type of Service of the route being config- ured. TOSType .1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.2 |
csOspfHostMetricThe Metric to be advertised.rw Metric .1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.3 |
csOspfHostStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.4 |
csOspfHostAreaIDThe Area the Host Entry is to be found within. By default, the area that a subsuming OSPF in- terface is in, or 0.0.0.0ro AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.5.1.5 |
csOspfIfTableThe OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. SEQUENCE OF CsOspfIfEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.6 |
csOspfIfEntryThe OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. CsOspfIfEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1 |
csOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.1 |
csOspfAddressLessIfFor the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.2 |
csOspfIfAreaIdA 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.rw AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.3 |
csOspfIfTypeThe OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.4 |
csOspfIfAdminStatusThe OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.rw Status .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.5 |
csOspfIfRtrPriorityThe priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.rw DesignatedRouterPriority .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.6 |
csOspfIfTransitDelayThe estimated number of seconds it takes to transmit a link state update packet over this interface.rw UpToMaxAge .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.7 |
csOspfIfRetransIntervalThe number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.rw UpToMaxAge .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.8 |
csOspfIfHelloIntervalThe length of time, in seconds, between the Hello packets that the routers within this area send on the interface. This value must be the same for all routers attached to a common network.rw HelloRange .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.9 |
csOspfIfRtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.rw PositiveInteger .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.10 |
csOspfIfPollIntervalThe larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.rw PositiveInteger .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.11 |
csOspfIfStateThe OSPF Interface State.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.12 |
csOspfIfDesignatedRouterThe IP Address of the Designated Router.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.13 |
csOspfIfBackupDesignatedRouterThe IP Address of the Backup Designated Router.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.14 |
csOspfIfEventsThe number of times this OSPF interface has changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.15 |
csOspfIfAuthTypeThe authentication type specified for this area.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.16 |
csOspfIfAuthKeyThe Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, csOspfIfAuthKey always returns an Oc- tet String of length zero.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.17 |
csOspfIfMulticastForwardingThe way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting csOspfMulticastForwarding to 0 effective- ly disables all multicast forwarding.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.18 |
csOspfIfDemandIndicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.19 |
csOspfIfMetricThe metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. Note: this is added for the support of TOS 0 Metric value, It will be deprecated later when TOS is supported and the csOspfIfMetricTable is being used.rw Metric .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.20 |
csOspfIfAdvertiseSubnetEnable/Disable advertise-subnet capability.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.21 |
csOspfIfStatusA row status type for the OSPF Interface Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.22 |
csOspfIfPassiveIndicates whether OSPF interface is passive. OSPF Hello packets not sent on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.6.1.23 |
csOspfIfMetricTableThe TOS metrics for a non-virtual interface identified by the interface index. SEQUENCE OF CsOspfIfMetricEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.7 |
csOspfIfMetricEntryA particular TOS metric for a non-virtual in- terface identified by the interface index. CsOspfIfMetricEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1 |
csOspfIfMetricIpAddressThe IP address of this OSPF interface. On row creation, this can be derived from the in- stance. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.1 |
csOspfIfMetricAddressLessIfFor the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Address. On row crea- tion, this can be derived from the instance. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.2 |
csOspfIfMetricTOSThe type of service metric being referenced. On row creation, this can be derived from the instance. TOSType .1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.3 |
csOspfIfMetricValueThe metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.rw Metric .1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.4 |
csOspfIfMetricStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.7.1.5 |
csOspfVirtIfTableInformation about this router's virtual inter- faces. SEQUENCE OF CsOspfVirtIfEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.8 |
csOspfVirtIfEntryInformation about a single Virtual Interface. CsOspfVirtIfEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1 |
csOspfVirtIfAreaIdThe Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0ro AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.1 |
csOspfVirtIfNeighborThe Router ID of the Virtual Neighbor.ro RouterID .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.2 |
csOspfVirtIfTransitDelayThe estimated number of seconds it takes to transmit a link- state update packet over this interface.rw UpToMaxAge .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.3 |
csOspfVirtIfRetransIntervalThe number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.rw UpToMaxAge .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.4 |
csOspfVirtIfHelloIntervalThe length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.rw HelloRange .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.5 |
csOspfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.rw PositiveInteger .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.6 |
csOspfVirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.7 |
csOspfVirtIfEventsThe number of state changes or error events on this Virtual Linkro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.8 |
csOspfVirtIfAuthTypeThe authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.9 |
csOspfVirtIfAuthKeyIf Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, csOspfVifAuthKey always returns a string of length zero.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.10 |
csOspfVirtIfStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.8.1.11 |
csOspfNbrTableA table of non-virtual neighbor information. SEQUENCE OF CsOspfNbrEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.9 |
csOspfNbrEntryThe information regarding a single neighbor. CsOspfNbrEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1 |
csOspfNbrIpAddrThe IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.1 |
csOspfNbrAddressLessIndexOn an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.ro InterfaceIndex .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.2 |
csOspfNbrRtrIdA 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.3 |
csOspfNbrOptionsA Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.4 |
csOspfNbrPriorityThe priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.rw DesignatedRouterPriority .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.5 |
csOspfNbrStateThe State of the relationship with this Neigh- bor.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.6 |
csOspfNbrEventsThe number of times this neighbor relationship has changed state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.7 |
csOspfNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.8 |
csOspfNbmaNbrStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.9 |
csOspfNbmaNbrPermanenceThis variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.10 |
csOspfNbrHelloSuppressedIndicates whether Hellos are being suppressed to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.9.1.11 |
csOspfVirtNbrTableA table of virtual neighbor information. SEQUENCE OF CsOspfVirtNbrEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.10 |
csOspfVirtNbrEntryVirtual neighbor information. CsOspfVirtNbrEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1 |
csOspfVirtNbrAreaThe Transit Area Identifier.ro AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.1 |
csOspfVirtNbrRtrIdA 32-bit integer uniquely identifying the neighboring router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.2 |
csOspfVirtNbrIpAddrThe IP address this Virtual Neighbor is us- ing.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.3 |
csOspfVirtNbrOptionsA Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.4 |
csOspfVirtNbrStateThe state of the Virtual Neighbor Relation- ship.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.5 |
csOspfVirtNbrEventsThe number of times this virtual link has changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.6 |
csOspfVirtNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.7 |
csOspfVirtNbrHelloSuppressedIndicates whether Hellos are being suppressed to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.10.1.8 |
csOspfExtLsdbTableThe OSPF Process's Links State Database. SEQUENCE OF CsOspfExtLsdbEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.11 |
csOspfExtLsdbEntryA single Link State Advertisement. CsOspfExtLsdbEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1 |
csOspfExtLsdbTypeThe type of the link state advertisement. Each link state type has a separate advertise- ment format. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.1 |
csOspfExtLsdbLsidThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.2 |
csOspfExtLsdbRouterIdThe 32 bit number that uniquely identifies the originating router in the Autonomous System. RouterID .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.3 |
csOspfExtLsdbSequenceThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.4 |
csOspfExtLsdbAgeThis field is the age of the link state adver- tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.5 |
csOspfExtLsdbChecksumThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.6 |
csOspfExtLsdbAdvertisementThe entire Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.4.1.11.1.7 |
csOspfAreaAggregateTableA range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range sub- sumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one. SEQUENCE OF CsOspfAreaAggregateEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.12 |
csOspfAreaAggregateEntryA range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are range configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one. CsOspfAreaAggregateEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1 |
csOspfAreaAggregateAreaIDThe Area the Address Aggregate is to be found within. AreaID .1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.1 |
csOspfAreaAggregateLsdbTypeThe type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.2 |
csOspfAreaAggregateNetThe IP Address of the Net or Subnet indicated by the range. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.3 |
csOspfAreaAggregateMaskThe Subnet Mask that pertains to the Net or Subnet. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.4 |
csOspfAreaAggregateStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.5 |
csOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.1.12.1.6 |
csOspfImpPolTableA set of Import Policies (see csImpPolTable) that are applied by ospf. SEQUENCE OF CsOspfImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.13 |
csOspfImpPolEntryEach entry represents a single import policy applied by the ospf layer on a Virtual Router. CsOspfImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1 |
csOspfImpPolIdThe Import Policy (see the corresponding entry in csImpPolTable) that is applied to this Virtual Router. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1.1 |
csOspfImpPolStatusThe RowStatus object for this table. This is used to add and delete entries from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.13.1.2 |
csOspfExpPolTableA set of Export Policies (see csExpPolTable) that are applied by ospf. SEQUENCE OF CsOspfExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.14 |
csOspfExpPolEntryEach entry represents a single import policy applied by the ospf layer on a Virtual Router. CsOspfExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1 |
csOspfExpPolIdThe Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1.1 |
csOspfExpPolStatusThe RowStatus object for this table. This is used to add and delete entries from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.14.1.2 |
csOspfIfMd5TableThe OSPF Interface MD5 table contains a list of MD5 authentication structures and the corresponding MD5 authentication IDs for the inter- faces from the viewpoint of OSPF. SEQUENCE OF CsOspfIfMd5Entry .1.3.6.1.4.1.3085.3.1.4.2.4.1.15 |
csOspfIfMd5EntryThe OSPF Interface Entry contains the MD5 authentication structure corresponding to one inter-face from the viewpoint of OSPF. CsOspfIfMd5Entry .1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1 |
csOspfIfMd5MessageDigestKeyIdMessage-digest authentication key. A shared secret key that is configured on all routers to specify the decryption algorithm to be used. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.1 |
csOspfIfMd5KeyMessage-digest authentication string for this interface. The string is encrypted using an algorithm specified by a shared secret key.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.2 |
csOspfIfMd5RowStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.4.1.15.1.3 |
csOspfTrap OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.4.2 |
csOspfTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.4.2.1 |
csOspfSetTrapA four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.4.2.1.1 |
csOspfConfigErrorTypePotential types of configuration conflicts. Used by the csOspfConfigError and csOspfConfigVir- tError traps.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.2.1.2 |
csOspfPacketTypeOSPF packet types.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.4.2.1.3 |
csOspfPacketSrcThe IP address of an inbound packet that can- not be identified by a neighbor instance.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.4.2.1.4 |
csOrionOspfEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.4.3 |
csOrionRip OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.5 |
csRipStats OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.5.1 |
csRipGlobalStatTableThis table contains per-VR level stats for RIP. These counters are intended to facilitate debugging quickly changing routes or failing neighbors. SEQUENCE OF CsRipGlobalStatEntry .1.3.6.1.4.1.3085.3.1.4.2.5.1.1 |
csRipGlobalStatEntryEach entry contains a set of statistics for a specific Virtual Router. CsRipGlobalStatEntry .1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1 |
csRipGlobalRouteChangesThe number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1.1 |
csRipGlobalQueriesThe number of responses sent to RIP queries from other systems.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.5.1.1.1.2 |
csRipIfStatTableA list of subnets which require separate status monitoring in RIP. SEQUENCE OF CsRipIfStatEntry .1.3.6.1.4.1.3085.3.1.4.2.5.1.2 |
csRipIfStatEntryA Single Routing Domain in a single Subnet. CsRipIfStatEntry .1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1 |
csRipIfStatRcvBadPacketsThe number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.1 |
csRipIfStatRcvBadRoutesThe number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.2 |
csRipIfStatSentUpdatesThe number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.5.1.2.1.3 |
csRipIfStatTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.5.1.3 |
csRipConf OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.5.2 |
csRipGlobalConfTableA table of virtual router-specific configuration parameters. SEQUENCE OF CsRipGlobalConfEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.1 |
csRipGlobalConfEntryEach entry contains a set of configuration specific to a single virtual router. CsRipGlobalConfEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1 |
csRipGlobalConfStatusEnable/Disable the use of RIP on this Virtual Router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.1 |
csRipGlobalConfAgeTimerw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.2 |
csRipGlobalConfPerUpdateIntrw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.3 |
csRipGlobalConfJitterUpdateStatusEnable/Disable the use of the Jitter Update featurerw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.4 |
csRipGlobalConfRfc1058CalcStatusEnable/Disable the use of the route metric calculation defined in rfc1058.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.5 |
csRipGlobalConfReqOnStartupEnable/Disable the use of the request on startup feature.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.6 |
csRipGlobalConfRowStatusThe RowStatus object for this object. This is used to add/delete rows from this table. Setting it to create and go creates RIP on this Virtual Router. Setting it to destroy removes RIP from this Virtual Router.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.7 |
csRipGlobalConfLogAreaFlagEach bit within this object enables loggin for a specific area within RIP. Below is a list of the different areas available for logging within RIP and their corresponding bits identifiers. area bit ------------------------------------------------------ packet 0 policy 1 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.8 |
csRipGlobalConfLogLevelFlagEach bit within this object enables logging at a specific level for RIP. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 debug 4 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.5.2.1.1.9 |
csRipIfConfTableA list of virtual interfaces which require separate configuration in RIP. SEQUENCE OF CsRipIfConfEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.2 |
csRipIfConfEntryA Single Routing Domain in a single Subnet. CsRipIfConfEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1 |
csRipIfConfStatusEnable/Disable the use of RIP on this Virtual Interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.1 |
csRipIfConfSendEnable/Disable the sending of RIP advertisements on this Virtual Interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.2 |
csRipIfConfReceiveV1Enable/Disable the receiving of RIP V1 advertisements on this Virtual Interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.3 |
csRipIfConfReceiveV2Enable/Disable the receiving of RIP V2 advertisements on this Virtual Interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.4 |
csRipIfConfSendDefRouteEnable/Disable the advertisement of default routes.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.5 |
csRipIfConfRcvDefRouteEnable/Disable the acceptance of advertised default routes.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.6 |
csRipIfConfSplitHorizonEnable/Disable the Split Horizon feature.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.7 |
csRipIfConfPoisonReverseEnable/Disable the Poison Reverse feature.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.8 |
csRipIfConfFlashUpdateEnable/Disable the Flash Update feature.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.9 |
csRipIfConfRipV1CompatibilityEnable/Disable compatibility with RIPv1 routers.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.10 |
csRipIfConfAuthPasswordThe password used in RIPv2 authentication. This object will return a zero length string in response to GET or GETNEXT requests.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.11 |
csRipIfConfRowStatusRowStatus for this object. This is used to add/delete rows from this table. Setting it to create and go creates RIP on this Virtual Interface. Setting it to destroy removes RIP from this Virtual Interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.5.2.2.1.12 |
csRipImpPolTableA set of Export Policies (see csExpPolTable) that are applied by rip. SEQUENCE OF CsRipImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.3 |
csRipImpPolEntryEach entry represents a single import policy applied by the rip layer on a Virtual Router. CsRipImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1 |
csRipImpPolIdThe Import Policy (see the corresponding entry in csImpPolTable) that is applied to this Virtual Router. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1.1 |
csRipImpPolStatusThe RowStatus object for this table. This is used to add and delete entries from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.5.2.3.1.2 |
csRipExpPolTableA set of Export Policies (see csExpPolTable) that are applied by rip. SEQUENCE OF CsRipExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.4 |
csRipExpPolEntryEach entry represents a single import policy applied by the rip layer on a Virtual Router. CsRipExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1 |
csRipExpPolIdThe Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1.1 |
csRipExpPolStatusThe RowStatus object for this table. This is used to add and delete entries from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.5.2.4.1.2 |
csOrionRipEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.5.3 |
csOrionTcp OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.6 |
csOrionVPNVRouterTcpTableThe table of TCP Parameters. SEQUENCE OF CsOrionVPNVRouterTcpEntry .1.3.6.1.4.1.3085.3.1.4.2.6.1 |
csOrionVPNVRouterTcpEntryThe entry of the table of TCP Parameters. CsOrionVPNVRouterTcpEntry .1.3.6.1.4.1.3085.3.1.4.2.6.1.1 |
csOrionVPNVRouterTcpRtoAlgorithmThe algorithm used to determine the timeout value used for retransmitting unacknowledged octets.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.1 |
csOrionVPNVRouterTcpRtoMinThe minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.2 |
csOrionVPNVRouterTcpRtoMaxThe maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.3 |
csOrionVPNVRouterTcpMaxConnThe limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.4 |
csOrionVPNVRouterTcpActiveOpensThe number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.5 |
csOrionVPNVRouterTcpPassiveOpensThe number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.6 |
csOrionVPNVRouterTcpAttemptFailsThe number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.7 |
csOrionVPNVRouterTcpEstabResetsThe number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.8 |
csOrionVPNVRouterTcpCurrEstabThe number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.9 |
csOrionVPNVRouterTcpInSegsThe total number of segments received, including those received in error. This count includes segments received on currently established connections.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.10 |
csOrionVPNVRouterTcpOutSegsThe total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.11 |
csOrionVPNVRouterTcpRetransSegsThe total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.12 |
csOrionVPNVRouterTcpInErrsThe total number of segments received in error (e.g., bad TCP checksums).ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.13 |
csOrionVPNVRouterTcpOutRstsThe number of TCP segments sent containing the RST flag.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.6.1.1.14 |
csOrionVPNVRouterTcpConnTableThe table of addressing information relevant to Orion's IP addresses. SEQUENCE OF CsOrionVPNVRouterTcpConnEntry .1.3.6.1.4.1.3085.3.1.4.2.6.2 |
csOrionVPNVRouterTcpConnEntryThe addressing information for one of this Orion's IP addresses. CsOrionVPNVRouterTcpConnEntry .1.3.6.1.4.1.3085.3.1.4.2.6.2.1 |
csOrionVPNVRouterTcpConnStateThe state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST egments are not sent reliably).rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.6.2.1.1 |
csOrionVPNVRouterTcpConnLocalAddressThe local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.6.2.1.2 |
csOrionVPNVRouterTcpConnLocalPortThe local port number for this TCP connection.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.6.2.1.3 |
csOrionVPNVRouterTcpConnRemAddressThe remote IP address for this TCP connection.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.6.2.1.4 |
csOrionVPNVRouterTcpConnRemPortThe remote port number for this TCP connection.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.6.2.1.5 |
csOrionTcpEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.6.3 |
csOrionUdp OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.7 |
csOrionVPNVRouterUdpTableThe table of addressing information relevant to Orion's IP addresses. SEQUENCE OF CsOrionVPNVRouterUdpEntry .1.3.6.1.4.1.3085.3.1.4.2.7.1 |
csOrionVPNVRouterUdpEntryThe addressing information for one of this Orion's IP addresses. CsOrionVPNVRouterUdpEntry .1.3.6.1.4.1.3085.3.1.4.2.7.1.1 |
csOrionVPNVRouterUdpInDatagramsThe total number of UDP datagrams delivered to UDP users.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.7.1.1.1 |
csOrionVPNVRouterUdpNoPortsThe total number of received UDP datagrams for which there was no application at the destination port.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.7.1.1.2 |
csOrionVPNVRouterUdpInErrorsThe number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.7.1.1.3 |
csOrionVPNVRouterUdpOutDatagramsThe total number of UDP datagrams sent from this entity.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.7.1.1.4 |
csOrionVPNVRouterUdpListenerTableThe table of addressing information relevant to Orion's IP addresses. SEQUENCE OF CsOrionVPNVRouterUdpListenerEntry .1.3.6.1.4.1.3085.3.1.4.2.7.2 |
csOrionVPNVRouterUdpListenerEntryThe addressing information for one of this Orion's IP addresses. CsOrionVPNVRouterUdpListenerEntry .1.3.6.1.4.1.3085.3.1.4.2.7.2.1 |
csOrionVPNVRouterUdpListenerLocalAddressThe local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.7.2.1.1 |
csOrionVPNVRouterUdpListenerLocalPortThe local port number for this UDP listener.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.7.2.1.2 |
csOrionUdpEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.7.3 |
csOrionBgp OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8 |
csBgpStats OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.1 |
csBgpConf OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.2 |
csBgpGen OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.2.1 |
csBgpGenTableThis table contains general, virtual router specific, BGP information. SEQUENCE OF CsBgpGenEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1 |
csBgpGenEntryEach entry contains general, virtual router specific BGP information for a single virtual router. CsBgpGenEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1 |
csBgpGenStatusThis object controls the operation of BGP as a whole on this virtual router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.1 |
csBgpGenLocalASThe local autonomous system number of this virtual router. This object will have a value of 0 if bgp is disabled. If bgp is enabled, this object cannot be set to 0.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.2 |
csBgpGenClearConnThis object is used to clear one of the existing BGP connections. To clear a single connection, enter the ip address of the remote end of the connection. When this object is read (get, getnext), the value 0.0.0.0 will be returned.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.3 |
csBgpGenDefaultMetricThe default metric used by the system. default value is -1 which indicates that the metric is not configuredrw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.4 |
csBgpGenDefaultLocalPrefDefault local preference of this BGP speaker default value is 100.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.5 |
csBgpGenConfedIdThe ConfedId of this system. -1 indicates no confedId has been configured.rw Integer32 (-1 | 1..65535) .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.6 |
csBgpGenDampEnableThis attribute is used to enable/disable route flap damping on this virtual router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.7 |
csBgpGenDampHalfLifeThe time in seconds after which the penalty associated with a flapping route is reduced by one half. default value is 15 mintues.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.8 |
csBgpGenDampReuseIf the penalty of a flapping route that has been suppressed falls below the value configured by this attribute, then the route is unsuppressed. Default is 2.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.9 |
csBgpGenDampSuppressIf the penalty of a flapping route exceeds the value configured by this atttribute, the route is suppressed. Default is 3.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.10 |
csBgpGenDampMaxSuppressThe maximum time that the route can be suppressed. Default is 16.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.11 |
csBgpGenRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.12 |
csBgpGenLogAreaFlagEach bit within this object enables loggin for a specific area within BGP. Below is a list of the different areas available for logging within BGP and their corresponding bits identifiers. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 vpn-update (all vpn operations) 6 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.13 |
csBgpGenLogLevelFlagEach bit within this object enables logging at a specific level for BGP. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 debug 4 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.14 |
csBgpGenClearConnFlagThis object is used to indicate the set of BGP connections that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn' attribute must be set. If set to 'nbrGroup' the csBgpNbrClearNbrGroupName' must be set. When this object is read the value 'none' will be returned.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.15 |
csBgpGenClearNbrGroupNameThis object is used to clear all the BGP connections that belong to the specified peer group.rw DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.16 |
csBgpGenHoldTimeConfiguredThe configured holdtime to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured (default value used will be 180 seconds). The timers configured for a Nbr or NbrGroup overrides timers configured for all BGP neighbors using this attributerw Integer32 (-1 |0 | 20..65534) .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.17 |
csBgpGenKeepAliveConfiguredThe configured Keepalive to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured (default value used will be 60 seconds). The timers configured for a Nbr or NbrGroup overrides timers configured for all BGP neighbors using this attributerw Integer32 (-1 |0 | 7..65534) .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.18 |
csBgpGenVpnLogAreaFlagEach bit within this object enables logging for a specific area within BGP/VPN module. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 system (all system operations) 2 vrf (BGP to VRF interface) 3 bgp-peer (BGP/VPN peer mmgt) 4 tunnel (PE-PE tunnel mmgt) 5 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.19 |
csBgpGenMaxPfxThis attribute limits the maximum number of BGP routes that can be learnt. Any additional routes learnt from BGP will be 1. discarded and a warning message is generated. or 2. accepted and a warning message is generated -1 indicates that no maximum threshold has been setrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.20 |
csBgpGenMaxPfxThresholdIf this attribute is configured, then when the number of routes learnt from all BGP peer reaches this threshold (percentage of csBgpMaxPfx) then a warning message is generated.rw Integer32 (-1 | 1..100) .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.21 |
csBgpGenMaxPfxTypeThis attribute indicates the action that needs to be taken when the number of routes learnt from the bgp reaches the max prefix limit configured via 'csBgpGenMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpGenMaxPfx' attribute is set, this attribute defaults to warning-and-discard.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.22 |
csBgpGenTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.1.2 |
csBgpNbr OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.2.2 |
csBgpNbrTableThis table contains information about the BGP Neighbors on each virtual router. SEQUENCE OF CsBgpNbrEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1 |
csBgpNbrEntryEach entry contains information about a single neighbor on a single virtual router. CsBgpNbrEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1 |
csBgpNbrAddrThe remote IP address of this entry's BGP neighbor. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.1 |
csBgpNbrIdThe BGP Identifier of this entry's BGP neighbor.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.2 |
csBgpNbrStateThe BGP Peer connection state.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.3 |
csBgpNbrAdminStatusThe desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.4 |
csBgpNbrRemoteASThe remote autonomous system number.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.5 |
csBgpNbrMd5PasswordThe Md5 password used to authenticate messages exchanged with this neighbor. If the neighbor belongs to a NbrGroup and this attribute is not configured, the Nbr inherits the group level value of this attribute.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.6 |
csBgpNbrRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.7 |
csBgpNbrGroupNmThe Group to which the peer belongs. If the peer is not configured to any group an empty string is returned.rw DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.8 |
csBgpNbrHoldTimeConfiguredThe configured holdtime to use with this Neighbor default value of -1 indicates that this attribute has not been configured (default value used will be 180 seconds). If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.rw Integer32 (-1 |0 | 20..65534) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.9 |
csBgpNbrLocalAddrThe IpAddress to be used at the local end of the connection with the bgp peer. If set to 0.0.0.0 it indicates that the LocalAddr is not configured. If the Nbr belongs to a NbrGroup, group level value of this attribute will override any value configured here.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.10 |
csBgpNbrNextHopSelfTo enable/disable this system to be the next hopself for an ebgp session with this peer. default is -1 which indicates not configured. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.11 |
csBgpNbrMhopGwTo specify the gateway address if this ebgp neighbor is not directly connected to this system. If the MhopGw is set to 0.0.0.0, it indicates that the MhopGw is not configured. If the Nbr belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.12 |
csBgpNbrPassiveIf this attribute is set to enable then this BGP speaker will not try to open a connection with the neighbor. Instead it will wait for the neighbor to initiate a connection.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.13 |
csBgpNbrMhopTTLTo specify the maximum TTL value for the TTL in the IP Header for BGP packets. This attribute is applicable only for ebgp sessions. This attribute deprecates csBgpNbrMhopGw attribute. If this attribute is configured for a IBGP peer it has no effect. If the Nbr belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attributerw INTEGER (-1 | 1..255) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.14 |
csBgpNbrIpv4AdminStatusIf this attribute is set to disable then this BGP speaker will not try to send/recieve routes for IPv4 address family. The BGP speaker will participate in IPv4 address family with its peer only if this attribute is set to enable.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.15 |
csBgpNbrVpnIpv4AdminStatusIf this attribute is set to disable then this BGP speaker will not try to send/recieve routes for VPN IPv4 address family. The BGP speaker will participate in VPN IPv4 address family with its peer only if this attribute is set to enable.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.16 |
csBgpNbrKeepAliveConfiguredThe configured keepalive to use with this Neighbor default value of -1 indicates that this attribute has not been configured (default value used will be 60 seconds). KeepAlive timer is normally derived from the negotiated holdtime and is 1/3 the value of negotiated holdtime. However if keepalive is configured the minmum of this value and 1/3 the value of negotiated holdtime is used. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.rw Integer32 (-1 | 0 | 7..65534) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.17 |
csBgpNbrRemovePrivateAsThis attribute is used to strip private as numbers from the aspath advertised to the neighbor. This attribute is used only with EBGP neighbors. Configuring this attribute to an IBGP peer has no effect. default is -1 which indicates not configured. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.18 |
csBgpNbrLogAreaFlagEach bit within this object enables loggin for a specific area within BGP Neighbor. Below is a list of the different areas available for logging within BGP and their corresponding bits identifier. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute. If the group level value is not set (or the neighbor does not belong to a NbrGroup) bgp global level value is inherited. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.19 |
csBgpNbrMaxPfxThis attribute is used to set the maximum number of prefixes that can be learnt from this neighbor. If the neighbor advertises more than this number set in this attribute, the neighbor connection is closed and the state is set to Idle. Connection is not restored until user does a clearConnection. If this attribute is not set, the Nbr inherits the group level value of this attributerw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.20 |
csBgpNbrVpnLogAreaFlagEach bit within this object enables loggin for a specific area within BGP Neighbor related VPN routing. If the neighbor belongs to a NbrGroup and this attribute is not set, the Nbr inherits the group level value of this attribute. If the group level value is not set (or the neighbor does not belong to a NbrGroup) bgp global level value is inherited. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.21 |
csBgpNbrMaxPfxThresholdIf this attribute is configured, then when the number of routes learnt from this peer reaches this threshold (percentage of csBgpNbrMaxPfx) then a warning message is generated.rw Integer32 (-1 | 1..100) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.22 |
csBgpNbrMaxPfxTypeThis attribute indicates the action that needs to be taken when the number of routes learnt from the neighbor reaches the max prefix limit configured via 'csBgpNbrMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpNbrMaxPfx' attribute is set, this attribute defaults to shutdown.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.1.1.23 |
csBgpNbrImpPolTableThis table is used to configure the import policies applied to each BGP neighbor on each virtual router. SEQUENCE OF CsBgpNbrImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2 |
csBgpNbrImpPolEntryEach entry contains information about a single policy applied to a single virtual router's BGP neighbor. CsBgpNbrImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1 |
csBgpNbrImpPolIdThe identifier of the policy to apply to this neighbor. This identifies an entry in either the csBgpImpImpPolTable or the csBgpExpImpPolTable. If the Nbr belongs to a Group any import policies defined at the neighbor level overrides group level import policies. If no import policies are defined at the neighbor level group level policies are inherited. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1.1 |
csBgpNbrImpPolRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.2.1.2 |
csBgpNbrExpPolTableThis table is used to configure the import policies applied to each BGP neighbor on each virtual router. SEQUENCE OF CsBgpNbrExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3 |
csBgpNbrExpPolEntryEach entry contains information about a single policy applied to a single virtual router's BGP neighbor. CsBgpNbrExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1 |
csBgpNbrExpPolIdThe identifier of the policy to apply to this neighbor. This identifies an entry in either the csBgpExpExpPolTable or the csBgpExpExpPolTable. If the Nbr belongs to a NbrGroup then any Export policies configured to this Nbr are ignored.i.e. Export policies defined at the group level takes precedence Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1.1 |
csBgpNbrExpPolRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.2.3.1.2 |
csBgpPol OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.2.3 |
csBgpConfed OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.2.4 |
csBgpConfedASTableThis table maintains a list of AS's which belong to the same confederation as this virtual router. SEQUENCE OF CsBgpConfedASEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1 |
csBgpConfedASEntryEach entry contains as AS number which belongs to the same confederation as this virtual router. CsBgpConfedASEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1 |
csBgpConfedASThis attribute identifies the AS which belongs to the same confederation as this virtual router. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1.1 |
csBgpConfedASRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.4.1.1.2 |
csBgpConfedASTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.4.2 |
csBgpNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.2.5 |
csBgpNetworkTableThis table maintains a list of IP Address/Mask which can be distributed from IGP into BGP. SEQUENCE OF CsBgpNetworkEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1 |
csBgpNetworkEntryEach entry contains an IP Address/Mask that need to be sent via BGP. CsBgpNetworkEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1 |
csBgpNetworkAddrThe IP Address that needs to be redistrubted to BGP. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.1 |
csBgpNetworkMaskThe IP Mask of the csBgpNetworkAddr that needs to be redistrubted to BGP. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.2 |
csBgpNetworkRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.5.1.1.3 |
csBgpNetworkTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.5.2 |
csBgpNbrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.8.2.6 |
csBgpNbrGroupTableThis table contains information about the BGP Group's on a single virtual router. SEQUENCE OF CsBgpNbrGroupEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1 |
csBgpNbrGroupEntryEach entry contains information about a single group on a single virtual router. CsBgpNbrGroupEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1 |
csBgpNbrGroupNameThe Name of the BGP Group DisplayString ( SIZE .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.1 |
csBgpNbrGroupAdminStatusThe desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections in the bgp group.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.2 |
csBgpNbrGroupRemoteASThe remote autonomous system number of the group.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.3 |
csBgpNbrGroupMd5PasswordThe Md5 password used to authenticate messages exchanged with the neighbors defined in the group. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMd5Password Attributerw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.4 |
csBgpNbrGroupRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.5 |
csBgpNbrGroupHoldTimeConfiguredThe configured holdtime to be used by the neighbors in this group. default value is -1 which indicates this is not configured and the neighbors in the group will be use a value of 180 seconds. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrHoldTimeConfigured attribute.rw Integer32 (-1 | 0| 20..65535) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.6 |
csBgpNbrGroupLocalAddrThe IpAddress to be used at the local end of the connection with the bgp peers in this group. If the LocalAddr is set to 0.0.0.0, it indicates that the LocalAddr is not configured.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.7 |
csBgpNbrGroupNextHopSelfTo enable/disable this system to be the next hopself for an ebgp session with the bgp peers in this group. default is -1 which indicates not configured and disabled. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrNextHopSelf attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.8 |
csBgpNbrGroupMhopGwTo specify the gateway address if the ebgp neighbors belonging to this group are not directly connected to this system. If the MhopGw is set to 0.0.0.0, it indicates that the MhopGw is not configured. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMhopGw attribute.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.9 |
csBgpNbrGroupMhopTTLTo specify the maximum TTL value for the TTL in the IP Header for BGP packets. This attribute is applicable only for ebgp sessions. This attribute deprecates csBgpNbrGroupMhopGw attribute. If this attribute is configured to an IBGP peer it has not effect. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrMhopTTL attributerw INTEGER (-1 | 1..255) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.10 |
csBgpNbrGroupIpv4AdminStatusIf this attribute is set to disable then this BGP speaker will not try to send/recieve routes for IPv4 address family. The BGP speaker will participate in IPv4 address family with its peer only if this attribute is set to enable.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.11 |
csBgpNbrGroupVpnIpv4AdminStatusIf this attribute is set to disable then this BGP speaker will not try to send/recieve routes for VPN IPv4 address family. The BGP speaker will participate in VPN IPv4 address family with its peer only if this attribute is set to enable.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.12 |
csBgpNbrGroupVpnIpv4AllowRfc2547CustomersThis attribute specifies the scope of RFC2547bis customers provisioned by this BGP speaker. none : no rfc2547 customers all : all VRs which are requesting to participate other: access controlled by specifying explicit list of customers by name or group-names in csBgpVpnv4AccessMapTable.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.13 |
csBgpNbrGroupVpnIpv4AllowVrmodelCustomersThis attribute specifies the scope of VR-model customers provisioned by this BGP speaker. none : no VR-model customers all : all VRs which are requesting to participate other: access controlled by specifying explicit list of customers by name or group-names in csBgpVpnv4AccessMapTable.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.14 |
csBgpNbrGroupKeepAliveConfiguredThe configured keepalive to be used by the neighbors in this group. default value is -1 which indicates this is not configured and the neighbors in the group will be use a value of 60 seconds. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrKeepAliveConfigured attribute. be 180 seconds). KeepAlive timer is normally derived from the negotiated holdtime and is 1/3 the value of negotiated holdtime. However if keepalive is configured the minmum of this value and 1/3 the value of negotiated holdtime is used.rw Integer32 (-1 | 0 | 7..65535) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.15 |
csBgpNbrGroupRemovePrivateAsThis attribute is used to strip private as numbers from the aspath advertised to the neighbor. This attribute is used only with EBGP neighbors. Configuring this attribute to an IBGP peer has no effect. default is -1 which indicates not configured and disabled. This attribute can be over-ridden for each Nbr in the group by setting the csBgpNbrNextHopSelf attribute.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.16 |
csBgpNbrGroupLogAreaFlagEach bit within this object enables loggin for a specific area within BGP Neighbor. Below is a list of the different areas available for logging within BGP and their corresponding bits identifier. If the group level value is not set bgp global level value is inherited. area bit ------------------------------------------------------ packet (all packets) 0 open (open packets) 1 update (update packets) 2 keepalive (keepalive packets) 3 notify (notify packets) 4 system (all system operations) 5 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.17 |
csBgpNbrGroupMaxPfxThis attribute is used to set the maximum number of prefixes that can be learnt from each neighbor in this group. If a neighbor advertises more than this number set in this attribute, then that neighbor connection is closed and the state is set to Idle. Connection is not restored until user does a clearConnection. The group level value can be over-ridden for each nbr by setting the csBgpNbrMaxPfx attributerw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.18 |
csBgpNbrGroupVpnLogAreaFlagEach bit within this object enables loggin for a specific area within BGP Neighbor related to VPN routing. If the group level value is not set bgp global level value is inherited. area bit ------------------------------------------------------ inbound-routes (updates recv) 0 outbound-routes (updates sent) 1 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.19 |
csBgpNbrGroupMaxPfxThresholdIf this attribute is configured, then when the number of routes learnt from the peers in this group reaches this threshold (percentage of csBgpNbrGroupMaxPfx) then a warning message is generated.rw Integer32 (-1 | 1..100) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.20 |
csBgpNbrGroupMaxPfxTypeThis attribute indicates the action that needs to be taken when the number of routes learnt from the peers in this group reaches the max prefix limit configured via 'csBgpNbrGroupMaxPfx' attribute. If this attribute is not set explicitly, and 'csBgpNbrGroupMaxPfx' attribute is set, this attribute defaults to shutdown.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.1.1.21 |
csBgpNbrGroupImpPolTableThis table is used to configure the import policies applied to each BGP Group on each virtual router. SEQUENCE OF CsBgpNbrGroupImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2 |
csBgpNbrGroupImpPolEntryEach entry contains information about a single policy applied to a single virtual router's BGP Group. CsBgpNbrGroupImpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1 |
csBgpNbrGroupImpPolIdThe identifier of the policy to apply to this group. This identifies an entry in either the csBgpImpImpPolTable or the csBgpExpImpPolTable. The import polices defined at the group level can be over-ridden for each Nbr in the group by accessing the csBgpNbrImpPolTable. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1.1 |
csBgpNbrGroupImpPolRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.2.1.2 |
csBgpNbrGroupExpPolTableThis table is used to configure the export policies applied to each BGP Group on each virtual router. SEQUENCE OF CsBgpNbrGroupExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3 |
csBgpNbrGroupExpPolEntryEach entry contains information about a single policy applied to a single virtual router's BGP Group. CsBgpNbrGroupExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1 |
csBgpNbrGroupExpPolIdThe identifier of the policy to apply to this group. This identifies an entry in either the csBgpExpExpPolTable or the csBgpExpExpPolTable. If the export policies are defined at the group level, all the neighbors in the group will inherit these export policies, even if export policies are defined at the Nbr level. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1.1 |
csBgpNbrGroupExpPolRowStatusThe RowStatus object for this table. This is used to add & remove rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.8.2.6.3.1.2 |
csOrionBgpEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.8.3 |
csOrionIsis OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.9 |
csIsisSystem OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.9.1 |
csIsisSysTableThe set of instances of the Integrated IS-IS protocol existing on the system. SEQUENCE OF CsIsisSysEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.1 |
csIsisSysEntryEach row defines information specific to a single instance of the protocol existing on the system. CsIsisSysEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1 |
csIsisSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.1 |
csIsisSysVersionThe version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.2 |
csIsisSysTypeThe type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.3 |
csIsisSysIDThe ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually.rw SystemID .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.4 |
csIsisSysMaxPathSplitsMaximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.5 |
csIsisSysMaxLSPGenIntMaximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.This value should be always lesser than csIsisSysMaxLSPLifetime and greater than csIsisSysMinL1LSPGenIntrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.6 |
csIsisSysMaxLSPLifetimeMaximum interval, in seconds, after which LSPs shall be aged out by this instance. This object follows the resettingTimer behaviour. This value should always be greater than csIsisSysMaxLSPGenIntrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.7 |
csIsisSysOrigL1LSPBuffSizeThe maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.rw LSPBuffSize .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.8 |
csIsisSysMaxAreaAddressesThe maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.9 |
csIsisSysMinL1LSPGenIntMinimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.10 |
csIsisSysMinL2LSPGenIntMinimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.11 |
csIsisSysPollESHelloRateThe value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.12 |
csIsisSysWaitTimeNumber of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.13 |
csIsisSysOperStateThe operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.rw OperState .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.14 |
csIsisSysL1StateThe state of the Level 1 database.ro LevelState .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.15 |
csIsisSysCorrLSPsNumber of corrupted LSPs detected.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.16 |
csIsisSysLSPL1DbaseOloadsNumber of times the LSP L1 database has become overloaded.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.17 |
csIsisSysManAddrDropFromAreasNumber of times a manual address has been dropped from the area.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.18 |
csIsisSysAttmptToExMaxSeqNumsNumber of times the IS has attempted to exceed the maximum sequence number.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.19 |
csIsisSysSeqNumSkipsNumber of times a sequence number skip has occurred.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.20 |
csIsisSysOwnLSPPurgesNumber of times a zero-aged copy of the system's own LSP is received from some other node.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.21 |
csIsisSysIDFieldLenMismatchesNumber of times a PDU is received with a different value for ID field length to that of the receiving system.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.22 |
csIsisSysMaxAreaAddrMismatchesNumber of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.23 |
csIsisSysOrigL2LSPBuffSizeThe maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.rw LSPBuffSize .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.24 |
csIsisSysL2StateThe state of the Level 2 database.ro LevelState .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.25 |
csIsisSysLSPL2DbaseOloadsNumber of times the Level 2 LSP database has become overloaded.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.26 |
csIsisSysAuthAreaTypeWhat authentication scheme, if any, is used to protect Level 1 Link State packets?rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.27 |
csIsisSysAuthAreaTransPwdThe value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of csIsisSysAuthAreaType has a value of plaintext. A modification of csIsisSysAuthAreaType does not modify the csIsisSysAuthAreaTransPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.28 |
csIsisSysAuthDomainTypeWhat authentication scheme, if any, is used to protect Level 2 Link State packets?rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.29 |
csIsisSysAuthDomainTransPwdThe value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of csIsisSysAuthDomainType has a value of plaintext. A modification of csIsisSysAuthDomainType does not modify the csIsisSysAuthDomainTransPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.30 |
csIsisSysAuthFailsThe number of authentication failures recognized by this instance of the protocol.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.31 |
csIsisSysLSPIgnoreErrorsIf true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.32 |
csIsisSysLogAdjacencyChangesIf true, causes IS-IS to generate a log message when an IS-IS adjacency changes state (up or down).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.33 |
csIsisSysPartChangespartition changesro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.34 |
csIsisSysMaxAreaCheckWhen on, enables checking of maximum area addresses per IS version of ISO10589.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.35 |
csIsisSysNextCircIndexThis object is used to assign values to csIsisCircIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads this object, and then writes the value back in a SET that creates a new instance of csIsisCircEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions.rw TestAndIncr (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.36 |
csIsisSysExistStateThe state of the ISIS router. Turning this off forces the router to forget all current staterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.37 |
csIsisSysAdminStatusThis object is used to enable/disable IS-IS routing on this Virtual Router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.38 |
csIsisSysSPFL1IntThis object is used for SPF Level 1 Interval, it is in seconds.rw Integer32 (1.. 120) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.39 |
csIsisSysSPFL2IntThis object is used for SPF Level 2 Interval, it is in seconds.rw Integer32 (1.. 120) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.40 |
csIsisSysSPFStartIntThe number in seconds system will wait to start SPF Interval calculation.rw Integer32 (1.. 120) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.41 |
csIsisSysDefInfoOrigWhen on, distributes the default route into the IS-IS routing domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.42 |
csIsisSysL2TO1LeakWhen on, enables Level-2 to Level-1 route leaking.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.43 |
csIsisSysLogAreaFlagEach bit within this object enables loggin for a specific area within ISIS. Below is a list of the different areas available for logging within BGP and their corresponding bits identifiers. area bit ------------------------------------------------------ system 0 adj 1 lsp 2 snp 3 spf 4 packet recv 5 packet send 6 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.44 |
csIsisSysLogLevelFlagEach bit within this object enables logging at a specific level for ISIS. Below is a list of the different log levels available and their corresponding bits identifiers. area bit ------------------------------------------------------ critical 0 error 1 warning 2 information 3 detail 4 debug 5 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.1.1.45 |
csIsisManAreaAddrTableThe set of manual area addresses configured on this Intermediate System. SEQUENCE OF CsIsisManAreaAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.2 |
csIsisManAreaAddrEntryEach entry contains one area address manually configured on this system CsIsisManAreaAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1 |
csIsisManAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.1 |
csIsisManAreaAddrA manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID. OSINSAddress .1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.2 |
csIsisManAreaAddrExistStateThe state of the csIsisManAreaAddrEntry. This object follows the Row Status behaviour. If an attempt is made to set this object to the value off when the corresponding csIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding ISIS instance has csIsisSysOperState set to On then the attempt is rejected.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.2.1.3 |
csIsisAreaAddrTableThe union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol. SEQUENCE OF CsIsisAreaAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.3 |
csIsisAreaAddrEntryEach entry contains one area address reported in a Level 1 LSP received by this instance of the protocol. CsIsisAreaAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1 |
csIsisAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1.1 |
csIsisAreaAddrAn area address reported in a Level 1 LSP received by this instance of the protocol.ro OSINSAddress .1.3.6.1.4.1.3085.3.1.4.2.9.1.3.1.2 |
csIsisSysProtSuppTableThis table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. SEQUENCE OF CsIsisSysProtSuppEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.4 |
csIsisSysProtSuppEntryEach entry contains one protocol supported by an instance of the Integrated ISIS protocol. CsIsisSysProtSuppEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1 |
csIsisSysProtSuppSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.1 |
csIsisSysProtSuppProtocolOne supported protocol. This object follows the index behaviour. SupportedProtocol .1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.2 |
csIsisSysProtSuppExistStateThe state of the csIsisSysProtSuppEntry. This object follows the RowStatus behavior.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.4.1.3 |
csIsisL2SummAddrTableThe set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System. SEQUENCE OF CsIsisL2SummAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.5 |
csIsisL2SummAddrEntryEach entry contains one IP summary address. CsIsisL2SummAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1 |
csIsisL2SummAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.1 |
csIsisL2SummAddressThe IP Address value for this summary address. This object follows the index behaviour. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.2 |
csIsisL2SummAddrMaskThe mask value for this summary address. This object follows the index behaviour. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.3 |
csIsisL2SummAddrExistStateThe existence state of this summary address. This object follows the row status behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.4 |
csIsisL2SummAddrOperStateThe operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of Level 2 LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol.rw OperState .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.5 |
csIsisL2SummAddrDefaultMetricThe default metric value to announce this summary address with in Level 2 LSPs generated by this system.rw DefaultMetric .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.6 |
csIsisL2SummAddrDelayMetricThe delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.7 |
csIsisL2SummAddrExpenseMetricThe expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.8 |
csIsisL2SummAddrErrorMetricThe error metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.1.5.1.9 |
csIsisExpPolTableA set of Export Policies (see csExpPolTable) that are applied by ISIS. SEQUENCE OF CsIsisExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.6 |
csIsisExpPolEntryEach entry represents a single export policy applied by the ISIS layer on a Virtual Router. CsIsisExpPolEntry .1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1 |
csIsisExpPolIdThe Export Policy (see the corresponding entry in csExpPolTable) that is applied to this Virtual Router. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1.1 |
csIsisExpPolStatusThe RowStatus object for this table. This is used to add and delete entries from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.1.6.1.2 |
csIsisExpPolTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.1.7 |
csIsisCirc OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.9.2 |
csIsisCircTableThe table of circuits used by each instance of Integrated IS-IS on this system. SEQUENCE OF CsIsisCircEntry .1.3.6.1.4.1.3085.3.1.4.2.9.2.1 |
csIsisCircEntryAn csIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. CsIsisCircEntry .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1 |
csIsisCircSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.1 |
csIsisCircIndexThe identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour. This is for SNMP Indexing purposes only and has no relation to any protocol value. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.2 |
csIsisCircIfIndexThe value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creationro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.3 |
csIsisCircIfSubIndexA specifier for the part of the interface ifIndex to which this circuit corresponds, such as a DLCI or VPI/VCI. This object cannot be modified after creationro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.4 |
csIsisCircLocalIDAn identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of csIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.5 |
csIsisCircOperStateThe operational state of the circuit. This object follows the operationalState behaviour.rw OperState .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.6 |
csIsisCircExistStateThe existence state of this circuit. This object follows the Row Status behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.7 |
csIsisCircTypeThe type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of csIsisCircIfIndex.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.8 |
csIsisCircL1DefaultMetricThe default metric value of this circuit for Level 1 traffic.rw DefaultMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.9 |
csIsisCircL1DelayMetricThe delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.10 |
csIsisCircL1ExpenseMetricThe expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.11 |
csIsisCircL1ErrorMetricThe error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.12 |
csIsisCircExtDomainIf true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.13 |
csIsisCircAdjChangesThe number of times an adjacency state change has occurred on this circuit.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.14 |
csIsisCircInitFailsThe number of times initialization of this circuit has failed.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.15 |
csIsisCircRejAdjsThe number of times an adjacency has been rejected on this circuit.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.16 |
csIsisCircOutCtrlPDUsThe number of IS-IS control PDUs sent on this circuit.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.17 |
csIsisCircInCtrlPDUsThe number of IS-IS control PDUs received on this circuit.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.18 |
csIsisCircIDFieldLenMismatchesThe number of times an IS-IS control PDU with an ID field length different to that for this system has been received.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.19 |
csIsisCircL2DefaultMetricThe default metric value of this circuit for level 2 traffic.rw DefaultMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.20 |
csIsisCircL2DelayMetricThe delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.21 |
csIsisCircL2ExpenseMetricThe expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.22 |
csIsisCircL2ErrorMetricThe error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.23 |
csIsisCircManL2OnlyWhen true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.24 |
csIsisCircL1ISPriorityThe priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.rw ISPriority .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.25 |
csIsisCircL1CircIDThe LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.26 |
csIsisCircL1DesISThe ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.ro SystemID .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.27 |
csIsisCircLANL1DesISChangesThe number of times the LAN Level 1 Designated Intermediate System has changed.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.28 |
csIsisCircL2ISPriorityThe priority for becoming LAN level 2 Designated Intermediate System.rw ISPriority .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.29 |
csIsisCircL2CircIDThe LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.30 |
csIsisCircL2DesISThe ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.ro SystemID .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.31 |
csIsisCircLANL2DesISChangesThe number of times the LAN Level 2 Designated Intermediate System has changed.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.32 |
csIsisCircMCAddrSpecifies which type of multicast address will be used for sending HELLO PDUs on this circuit.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.33 |
csIsisCircPtToPtCircIDThe ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.34 |
csIsisCircL1HelloTimerMaximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.35 |
csIsisCircL2HelloTimerMaximum period, in milliseconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.36 |
csIsisCircL1HelloMultiplierThis value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this ISrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.37 |
csIsisCircL2HelloMultiplierThis value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this ISrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.38 |
csIsisCircDRL1HelloTimerPeriod, in milliseconds, between Level 1 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.39 |
csIsisCircDRL2HelloTimerPeriod, in milliseconds, between Level 2 PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.40 |
csIsisCircMinBroadLSPTransIntMinimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.41 |
csIsisCircL1MinLSPTransIntMinimum interval, in seconds, between re-transmission of an Level 1 LSP. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.42 |
csIsisCircL2MinLSPTransIntMinimum interval, in seconds, between re-transmission of an Level 2 LSP. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.43 |
csIsisCircL1CSNPIntervalInterval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.44 |
csIsisCircL2CSNPIntervalInterval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.45 |
csIsisCircL1PartSNPIntervalMinimum interval between sending Level 1 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.46 |
csIsisCircL2PartSNPIntervalMinimum interval between sending Level 2 Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.47 |
csIsisCircLSPThrottleMinimal interval of time, in milliseconds, between transmissions of LSPs on a point to point interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.48 |
csIsisCircPassiveCircuitShould we include this interface in LSPs, even if it is not running the ISIS Protocol?rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.49 |
csIsisCircMeshGroupEnabledIs this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.50 |
csIsisCircMeshGroupCircuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If csIsisCircMeshGroupEnabled is false, this value is ignored.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.51 |
csIsisCircL1AuthTypeWhat authentication scheme, if any, is used to protect Level 1 and Point-to-Point hello packets?rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.52 |
csIsisCircL1PasswordThe value to be used as the Authentication Key in Level 1 and Point-to-Point hello packets whenever the corresponding instance of csIsisCircL1AuthType has a value of plaintext. A modification of the corresponding instance of csIsisCircL1AuthType does not modify the csIsisCircL1Password value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.53 |
csIsisCircL2AuthTypeWhat authentication scheme, if any, is used to protect Level 2 hello packets?rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.54 |
csIsisCircL2PasswordThe value to be used as the Authentication Key in Level 1 Hello packets whenever the corresponding instance of csIsisCircL1AuthType has a value of plaintext. A modification of the corresponding instance of csIsisCircL1AuthType does not modify the csIsisCircL1Password value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.55 |
csIsisCircSmallHellosCan we send unpadded hellos on LAN circuits? Off means LAN Hellos must be padded.rw OperState .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.56 |
csIsisManAdjNeighNSAPThe address of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour.rw OSINSAddress .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.57 |
csIsisManAdjNeighSNPAThe SNPA of the neighbour if this is a manual adjacency. This object follows the replaceOnlyWhileDisabled behaviour.rw SNPAAddress .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.58 |
csIsisCircIPEncapsShould we encapsulate IS-IS in IP packets?rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.59 |
csIsisCircUpTimeThe amount of time in seconds since this circuit entered state 'up'. Note: This can be implemented as start time less the current time.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.60 |
csIsisCircIpAddressThe IP Address of the VI that IS-IS is enabled on.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.61 |
csIsisCircLevelThis is the IS-IS circuit level. Level-1 only => isisCircLevel = 1, Level-2 only => isisCircLevel = 2, Level-1 or 2 => isisCircLevel = 3.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.2.1.1.62 |
csIsisCircTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.2.2 |
csIsisISAdj OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.9.3 |
csIsisISAdjTableThe table of adjacencies to Intermediate Systems. SEQUENCE OF CsIsisISAdjEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.1 |
csIsisISAdjEntryEach entry corresponds to one adjacency to an Intermediate System on this system. CsIsisISAdjEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1 |
csIsisISAdjSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.1 |
csIsisISAdjCircIndexThe Circuit Index of the Circuit which is the parent of the IS adjacency. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.2 |
csIsisISAdjIndexA unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created automatically. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.3 |
csIsisISAdjStateThe state of the adjacencyro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.4 |
csIsisISAdjNeighSNPAAddressThe SNPA address of the neighboring system.ro SNPAAddress .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.5 |
csIsisISAdjNeighSysTypeThe type of the neighboring system.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.6 |
csIsisISAdjNeighSysIDThe system ID and circuit ID of the neighboring Intermediate System set from the source ID field of the neighbor's IIH PDUs.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.7 |
csIsisISAdjUsageAn adjacency of type level1 is used for level 1 traffic only. An adjacency of type level2 is used for level 2 traffic only. An adjacency of type level1and2 is used for both level 1 and level 2 traffic. There may be two adjacencies (of types level1 and level2) between the same pair of Intermediate Systems.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.8 |
csIsisISAdjHoldTimerThe holding time for this adjacency updated from received IIH PDUs.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.9 |
csIsisISAdjNeighPriorityPriority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of csIsisISAdjNeighSysType is L1IntermediateSystem or LAN Level 2 Designated Intermediate System if the value of csIsisISAdjNeighSysType is L2IntermediateSystem.ro ISPriority .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.10 |
csIsisISAdjUpTimeThe amount of time in seconds since this adjacency entered state 'up'. Note: This can be implemented as start time less the current time.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.1.1.11 |
csIsisISAdjAreaAddrTableThis table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. SEQUENCE OF CsIsisISAdjAreaAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.2 |
csIsisISAdjAreaAddrEntryEach entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. CsIsisISAdjAreaAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1 |
csIsisISAdjAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.1 |
csIsisISAdjAreaAddrCircIndexThe identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.2 |
csIsisISAdjAreaAddrAdjIndexThe identifier of the IS adjacency to which this entry belongs. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.3 |
csIsisISAdjAreaAddressOne Area Address as reported in IIH PDUs received from the neighbor.ro OSINSAddress .1.3.6.1.4.1.3085.3.1.4.2.9.3.2.1.4 |
csIsisISAdjIPAddrTableThis table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. SEQUENCE OF CsIsisISAdjIPAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.3 |
csIsisISAdjIPAddrEntryEach entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. CsIsisISAdjIPAddrEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1 |
csIsisISAdjIPAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.1 |
csIsisISAdjIPAddrCircIndexThe identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.2 |
csIsisISAdjIPAddrAdjIndexThe identifier of the IS adjacency to which this entry belongs. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.3 |
csIsisISAdjIPAddressOne IP Address as reported in IIH PDUs received from the neighbor.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.9.3.3.1.4 |
csIsisISAdjProtSuppTableThis table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs. SEQUENCE OF CsIsisISAdjProtSuppEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.4 |
csIsisISAdjProtSuppEntryEach entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs. CsIsisISAdjProtSuppEntry .1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1 |
csIsisISAdjProtSuppSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.1 |
csIsisISAdjProtSuppCircIndexThe identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.2 |
csIsisISAdjProtSuppAdjIndexThe identifier the IS adjacency to which this entry corresponds. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.3 |
csIsisISAdjProtSuppProtocolOne supported protocol as reported in IIH PDUs received from the neighbor.ro SupportedProtocol .1.3.6.1.4.1.3085.3.1.4.2.9.3.4.1.4 |
csIsisISAdjProtSuppTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.3.5 |
csIsisReachAdddr OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.9.4 |
csIsisIPReachAddr OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.9.5 |
csIsisIPRATableThe table of IP Reachable Addresses to networks, subnetworks or hosts either manually configured or learned from another protocol. SEQUENCE OF CsIsisIPRAEntry .1.3.6.1.4.1.3085.3.1.4.2.9.5.1 |
csIsisIPRAEntryEach entry defines an IP Reachable Address to a network, subnetwork or host. CsIsisIPRAEntry .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1 |
csIsisIPRASysInstanceThe identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.1 |
csIsisIPRACircIndexThe identifier of the Circuit over which this IP destination is reachable. This object follows the index and manualOrAutomatic behaviours. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.2 |
csIsisIPRAIndexThe identifier for this csIsisIPRAEntry. This value must be unique amongst all IP Reachable Addresses on the same parent Circuit. This object follows the index and manualOrAutomatic behaviours. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.3 |
csIsisIPRATypeThe type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.4 |
csIsisIPRADestThe destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. This object follows the manualOrAutomatic behaviour.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.5 |
csIsisIPRAMaskThe network mask for the IP Address in the csIsisIPRADest object. This object follows the manualOrAutomatic behaviour.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.6 |
csIsisIPRAExistStateThe state of this IP Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.7 |
csIsisIPRAOperStateThe operational state of the IP Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours.rw OperState .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.8 |
csIsisIPRADefMetricThe default metric value for reaching the specified destination over this circuit. This object follows the manualOrAutomatic behaviour.rw DefaultMetric .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.9 |
csIsisIPRADelMetricThe delay metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.10 |
csIsisIPRAExpMetricThe expense metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.11 |
csIsisIPRAErrMetricThe error metric value for reaching the specified destination over this circuit. The value zero is reserved to mean the metric is not supported. This object follows the manualOrAutomatic behaviour.rw OtherMetric .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.12 |
csIsisIPRADefMetricTypeIndicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour.rw MetricType .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.13 |
csIsisIPRADelMetricTypeIndicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour.rw MetricType .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.14 |
csIsisIPRAExpMetricTypeIndicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour.rw MetricType .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.15 |
csIsisIPRAErrMetricTypeIndicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour.rw MetricType .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.16 |
csIsisIPRASNPAAddressThe SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This object follows the manualOrAutomatic behaviour.rw SNPAAddress .1.3.6.1.4.1.3085.3.1.4.2.9.5.1.1.17 |
csOrionIsisEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.9.6 |
csOrionMpls OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.10 |
csTeRsvpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.10.1 |
csRsvpSessionTableThis table has one row for each session being managed by LSR. It provides the statistics pertaining to the session. SEQUENCE OF CsRsvpSessionEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.1 |
csRsvpSessionEntryAn entry in this table is created by LSR for every established session. This entry is indexed by Session destination IP address Tunnel Identifier and Extended Tunnel Identifier. CsRsvpSessionEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1 |
csRsvpSessionTunnelEndpointOne of the indices for the row of the table. Specifies the IP address (IPv4 only supported) of the destination of the Session. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.1 |
csRsvpSessionTunnelIDOne of the indices for the row of the table. Specifies the Tunnel identifier of the Session. INTEGER .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.2 |
csRsvpSessionExtendedTunnelIDOne of the indices for the row of the table. Specifies the Extended Tunnel identifier of the Session. Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.3 |
csRsvpSessionUpPsbsThis object specifies the number of upside senders (Up PSBs) for this session known to this processor of this LSR.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.4 |
csRsvpSessionDownPsbsThis object specifies the number of downside senders (Down PSBs) for this session known to this processor of this LSR.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.5 |
csRsvpSessionUpRsbsThis object specifies the number of upside receivers (Up RSBs) for this session known to this processor of this LSR.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.6 |
csRsvpSessionDownRsbsThis object specifies the number of downside receivers (Down RSBs) for this session known to this processor of this LSR.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.1.1.7 |
csRsvpIfTableThis table has one row each for every interface of this LSR running TE-RSVP. Corresponding row in csRsvpNbrTable must be configured before a row in this table can be activated. SEQUENCE OF CsRsvpIfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.2 |
csRsvpIfEntryAn entry in this table is created for every interface running TE-RSVP. CsRsvpIfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1 |
csRsvpIfMaxBandwidthRSVP Reservable Bandwidth (KBPS)rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.1 |
csRsvpIfMaxFlowBandwidthLargest Reservable Flow (KBPS)rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.2 |
csRsvpIfUdpNbrsThe number of neighbors perceived to be using only the RSVP UDP Encapsulation.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.3 |
csRsvpIfIpNbrsThe number of neighbors perceived to be using only the RSVP IP Encapsulation.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.4 |
csRsvpIfNbrsThe number of neighbors currently perceived; this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs by the number of neighbors using both encapsulations.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.5 |
csRsvpIfEnabledIf TRUE, RSVP is enabled on this Interface. If FALSE, RSVP is not enabled on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.6 |
csRsvpIfUdpRequiredIf TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if rsvpIfUdpNbrs is not zero.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.7 |
csRsvpIfRefreshBlockadeMultipleThe value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.8 |
csRsvpIfRefreshMultipleThe value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.9 |
csRsvpIfTTLThe value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.10 |
csRsvpIfRefreshIntervalThe value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface.rw TimeInterval UNITS "milliseconds" .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.11 |
csRsvpIfRouteDelayThe approximate period from the time a route is changed to the time a resulting message appears on the interface.rw TimeInterval UNITS "hundredths of a second" .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.12 |
csRsvpIfStatus'active' on interfaces that are configured for RSVP. Corresponding row in csRsvpNbrTable must be configured and activated before the row in this table can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.13 |
csRsvpIfPktsInNumber of RSVP Packets received in this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.14 |
csRsvpIfPathInNumber of PATH messages received on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.15 |
csRsvpIfResvInNumber of RESV messages received on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.16 |
csRsvpIfPathTearInNumber of Path Tear messages received on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.17 |
csRsvpIfPathErrInNumber of Path Error messages received on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.18 |
csRsvpIfResvTearInNumber of Resv Tear messages received on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.19 |
csRsvpIfResvErrInNumber of RESV Error messages received on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.20 |
csRsvpIfResvConfInNumber of RESV COnfirmation messages received on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.21 |
csRsvpIfPathOutNumber of Path messages sent out over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.22 |
csRsvpIfResvOutNumber of Resv messages sent out over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.23 |
csRsvpIfPathTearOutNumber of Path Tear messages sent out over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.24 |
csRsvpIfPathErrOutNumber of Path Error messages sent out over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.25 |
csRsvpIfResvTearOutNumber of Resv Tear messages sent out over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.26 |
csRsvpIfResvErrOutNumber of Resv Error messages sent out over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.27 |
csRsvpIfResvConfOutNumber of Resv Confirm messages sent out over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.28 |
csRsvpIfBadPathInNumber of bad Path messages received over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.29 |
csRsvpIfBadResvInNumber of bad Resv messages received over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.30 |
csRsvpIfBadPathTearInNumber of bad Path Tear messages received over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.31 |
csRsvpIfBadPathErrInNumber of bad Path Error messages received over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.32 |
csRsvpIfBadResvTearInNumber of bad Resv Tear messages received over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.33 |
csRsvpIfBadResvErrInNumber of bad Resv Error messages received over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.34 |
csRsvpIfBadResvConfInNumber of bad Resv Confirm messages received over this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.35 |
csRsvpIfBadOtherInNumber of messages received over this interface which were not valid RSVP messages.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.36 |
csRsvpIfUpPsbsCreatedNumber of Upside PSBs created so far on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.37 |
csRsvpIfDownPsbsCreatedNumber of Downside PSBs created so far on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.38 |
csRsvpIfUpRsbsCreatedNumber of Upside RSBs created so far on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.39 |
csRsvpIfDownRsbsCreatedNumber of Downside RSBs created so far on this interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.40 |
csRsvpIfIngressLspsCreatedNumber of LSPs created on this node which were originated from this interface of this node.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.41 |
csRsvpIfEgressLspsCreatedNumber of LSPs created on this node which were terminated on this interface of this node.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.42 |
csRsvpIfIpAddressThe IP Address of this RSVP interface.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.43 |
csRsvpIfRRCapableIndicates the administrator's intent to switch on/off RSVP aggregation on the interface. Aggregation includes RSVP Refresh Reduction related messages.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.44 |
csRsvpIfAckDesiredIndicates the administrator's intent as to whether acknowledgement is desired for the aggregation messages on this interface. If the administrator switches this variable on, then RSVP aggregation (csRsvpIfRRCapable) is switched ON automatically.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.45 |
csRsvpIfHelloIntervalConfigures the interval in seconds between Rsvp Hello messages exchanged between neighbors, on this interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.2.1.46 |
csRsvpVrConfTableThis table is used to provide RSVP related functionality at the router level SEQUENCE OF CsRsvpVrConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.3 |
csRsvpVrConfEntryThis entry is indexed by the VPN and VR ID CsRsvpVrConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1 |
csRsvpVrAdminStatusIndicates the administrator's intent as to whether RSVP should be enabled or disabled on this router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.1 |
csRsvpVrEventLogLevelThis object is used to set the level of details for event logs for RSVPrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.2 |
csRsvpVrEventLogAreaThis object is used to set the area of event logs for RSVPrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.3 |
csRsvpVrConfOpCodeUsed by Rsvp Trace Commandsrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.4 |
csRsvpVrConfRowStatusA row status type for the Rsvp Tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.1.3.1.5 |
csRsvpVrConfTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.4 |
csRsvpIfQueueTableThis table is used to allocate MPLS bandwidth for different hardware queues on a physical VI. SEQUENCE OF CsRsvpIfQueueEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.5 |
csRsvpIfQueueEntryAn entry in this table is created for every hardware queue on a physical VI to reserve bandwidth for MPLS. CsRsvpIfQueueEntry .1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1 |
csRsvpIfQueueIDThe possible queue on a physical VI Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.1 |
csRsvpIfQueueBandwidthThe maximum reservable bandwidth for MPLS.rw Integer32 (-1..10000000) .1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.2 |
csRsvpIfQueueRowStatusA row status type for this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.3 |
csRsvpIfQueueOperBandwidthOperational Bandwidth for the queuero Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.5.1.4 |
csRsvpIfQueueTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.1.6 |
csTeMplsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.10.2 |
csMplsLspTableList of Configured Label Switched Paths. SEQUENCE OF CsMplsLspEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.1 |
csMplsLspEntryEntry containing information about a particular Label Switched Path. CsMplsLspEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1 |
csMplsLspIDThis object identifies a Label Switched Path. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.1 |
csMplsLspNameName of the Label Switched Path. DisplayString .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.2 |
csMplsLspStateThe operational state of the LSP.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.3 |
csMplsLspOctetsThe number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.ro Counter64 SYNTAX Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.4 |
csMplsLspPacketsThe number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.ro Counter64 SYNTAX Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.5 |
csMplsLspAgeThe age (i.e., time from creation till now) of this LSP in 10-millisecond periods.rw TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.6 |
csMplsLspTimeUpThe total time in 10-millisecond units that this LSP has been operational. For example, the percentage up time can be determined by computing (mplsLspTimeUp/mplsLspAge * 100 %).rw TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.7 |
csMplsLspPrimaryTimeUpThe total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contribution of the primary path to the operational time is given by (mplsLspPrimaryTimeUp/mplsLspTimeUp * 100) %.rw TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.8 |
csMplsLspTransitionsThe number of state transitions (up -> down and down -> up) this LSP has undergone.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.9 |
csMplsLspLastTransitionThe time in 10-millisecond units since the last transition occurred on this LSP.rw TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.10 |
csMplsLspPathChangesThe number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.11 |
csMplsLspLastPathChangeThe time in 10-millisecond units since the last change occurred on this LSP.rw TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.12 |
csMplsLspConfiguredPathsThe number of paths configured for this LSP.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.13 |
csMplsLspStandbyPathsThe number of standby paths configured for this LSP.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.14 |
csMplsLspOperationalPathsThe number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.15 |
csMplsLspFromSource IP address of this LSP.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.16 |
csMplsLspToDestination IP address of this LSP.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.17 |
csMplsPathNameThe name of the active path for this LSP, if any. If there is none, the name should be empty.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.18 |
csMplsPathTypeThe type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not suppliedrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.19 |
csMplsPathBandwidthThe configured bandwidth for this LSP, in units of thousands of bits per second (Kbps).rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.20 |
csMplsPathCOSThe configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not suppliedrw INTEGER (0..7 | 255) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.21 |
csMplsPathIncludeThis is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'include' set MUST be non-null. This field is meaningless if csMplsPathName or csMplsPathIdentifier is not suppliedrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.22 |
csMplsPathExcludeThis is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'exclude' set MUST be null.This field is meaningless if csMplsPathName or csMplsPathIdentifier is not suppliedrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.23 |
csMplsPathSetupPriorityThe setup priority configured for this path.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.24 |
csMplsPathHoldPriorityThe hold priority configured for this path.rw INTEGER .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.25 |
csMplsPathRecordRouteThis is used to set record routerw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.26 |
csMplsPathDynamicThis is used to configure a dynamic pathrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.27 |
csMplsPathIdentifierPath-option explicit-path identifierrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.28 |
csMplsPathBgpAutoRouteAnnounceUsed to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.29 |
csMplsPathMetricModeUsed to specify the MPLS traffic engineering tunnel metric type that the IGP enhanced SPF calculation uses. MetricMode can be absolute or relativerw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.30 |
csMplsPathMetricValueAbsolute metric mode the user can enter a positive value and for relative metric mode the user can enter a positive negative or zero valuerw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.31 |
csMplsPathAffinityUsed to configure an affinity for an MPLS traffic engineering tunnelrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.32 |
csMplsPathAffinityMaskUsed to configure affinity mask value for an MPLS traffic engineering tunnelrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.33 |
csMplsLspPreferenceUsed to set the Lsp Preference Value Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.34 |
csMplsLspRowStatusA row status type for the Lsp Tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.35 |
csMplsPathIsisAutoRouteAnnounceUsed to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation.Used by Isis.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.36 |
csMplsPathOspfAutoRouteAnnounceUsed to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculation. Used by Ospf.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.37 |
csMplsVrPathRecordRouteThis entry records the path recorded by Rsvp for the tunnel. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each explicit address.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.38 |
csMplsLspOperationStatusThis object contains the operational status for the LSPro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.39 |
csMplsPathExpValueExp Value to use for this pathrw INTEGER (-1..7) .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.40 |
csMplsPathCosValueCos Value for this pathrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.41 |
csMplsPathDropPrecedenceDrop precedence for this pathrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.42 |
csMplsPathHotStandbyMark this path as Hot Standbyrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.43 |
csMplsPathVpnAutoRouteAnnounceUsed to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculationrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.44 |
csMplsPathPwe3AutoRouteAnnounceUsed to specify that the IGP should use the tunnel (if the tunnel is up) in its enhanced shortest path first (SPF) calculationrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.1.1.45 |
csMplsInterfaceConfTableThis table has one entry for every interface running Mpls SEQUENCE OF CsMplsInterfaceConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.2 |
csMplsInterfaceConfEntryAn entry in this table is created for interface specific Label space configuration information. CsMplsInterfaceConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1 |
csMplsInterfaceUseInterfaceLabelsIf TRUE indicates that this interface is configured to use interface specific label space. If FALSE then this interface is configured to use Platform specific label space.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.1 |
csMplsInterfaceLabelRangeThis object specifies the type of Labels that are being use for interface specific label space configuration information. Value of this object is significant only if csMplsInterfaceUseInterfaceLabels is set to TRUE. (If csMplsInterfaceUseInterfaceLabels is FALSE then this interface is configured to use Platform specific label space.)rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.2 |
csMplsInterfaceLabelMinInThis object specifies the lower limit of the label range to be used in incoming packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.rw MplsLabel .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.3 |
csMplsInterfaceLabelMaxInThis object specifies the upper limit of the label range to be used in incoming packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.rw MplsLabel .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.4 |
csMplsInterfaceLabelMinOutThis object specifies the lower limit of the label range to be used in outgoing packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.rw MplsLabel .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.5 |
csMplsInterfaceLabelMaxOutThis object specifies the upper limit of the label range to be used in outgoing packets over this interface. This object specifies configuration information for interface specific label space and is significant only if value of csMplsInterfaceUseInterfaceLabels is set to TRUE.rw MplsLabel .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.6 |
csMplsInterfaceAdminStatusIndicates the administrator's intent as to whether MPLS should be enabled or disabled on this interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.7 |
csMplsInterfaceOperStatusThis object specifies the operational state of MPLS on this interface.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.8 |
csMplsInterfaceAdminWeightUsed to override the Interior Gateway Protocol (IGP) administrative weight (cost) of the linkrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.9 |
csMplsInterfaceAttribFlagsUsed to set the user-specified attribute flags for the interfacerw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.10 |
csMplsInterfaceRowStatusA row status type for the MplsInterface tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.2.1.11 |
csMplsVrConfTableThis table is used to Configure Mpls on a Virtual Router. SEQUENCE OF CsMplsVrConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.3 |
csMplsVrConfEntryThis entry is indexed by the VPN and VR ID CsMplsVrConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1 |
csMplsVrAdminStatusIndicates the administrator's intent as to whether MPLS should be enabled or disabled on this router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.1 |
csMplsVrEventLogLevelThis object is used to set the level of details for event logs for MPLSrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.2 |
csMplsVrEventLogAreaThis object is used to set the area of event logs for MPLSrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.3 |
csMplsVrConfOpCodeUsed for Mpls Trace Commands onlyrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.4 |
csMplsVrConfRowStatusThe existence state of this table. This object follows the Row Status behaviourrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.3.1.5 |
csMplsExtensionsTableThis table is used to support Mpls Extensions SEQUENCE OF CsMplsExtensionsEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.4 |
csMplsExtensionsEntryThis entry is indexed by the VPN and VrID CsMplsExtensionsEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1 |
csMplsMetricStyleThis entry is used to define the metric-style. wide => csMplsMetricStyle = 1, narrow => csMplsMetricStyle = 2, transition => csMplsMetricStyle = 3rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.1 |
csMplsExtensionsRowStatusThe existence state of this table. This object follows the Row Status behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.2 |
csMplsOspfOpaqueAdminStatusThis entry is used to indicate if Ospf Opaque is enabled or disabled on a router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.4.1.3 |
csMplsVrPathConfTableThis table is used to configure Explicitly Routed Path SEQUENCE OF CsMplsVrPathConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.5 |
csMplsVrPathConfEntryThis entry is indexed by the VPN and VR ID CsMplsVrPathConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1 |
csMplsVrPathNameExplicit-path Name DisplayString .1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.1 |
csMplsVrPathExplicitRouteThe explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless if csMplsVrPathIdentifier or csMplsVrPathName is not suppliedrw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.2 |
csMplsVrPathIdentifierExplicit-path Identifierrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.3 |
csMplsVrPathConfRowStatusThe existence state of this table. This object follows the Row Status behaviourrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.5.1.4 |
csMplsIsisExtensionsTableThis table is used to support ISIS extensions to MPLS SEQUENCE OF CsMplsIsisExtensionsEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.6 |
csMplsIsisExtensionsEntryThis entry is indexed by the VPN and VrID CsMplsIsisExtensionsEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1 |
csMplsTrafficEnggLevelThis entry is used to define the level on which MPLS traffic-eng will be used. Level-1 only => csMplsExtLevel = 1, Level-2 only => csMplsExtLevel = 2 Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.1 |
csMplsTrafficEnggAdminStatusThis entry is used to indicate if mpls traffic-eng is enabled or disabled on a level. This entry is used in conjunction with csMplsTrafficEnggLevel.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.2 |
csMplsIsisExtensionsRowStatusThe existence state of this table. This object follows the Row Status behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.6.1.3 |
csMplsOspfExtensionsTableThis table is used to support Ospf Extensions for Mpls SEQUENCE OF CsMplsOspfExtensionsEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.7 |
csMplsOspfExtensionsEntryThis entry is indexed by the VPN and VrID CsMplsOspfExtensionsEntry .1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1 |
csMplsOspfAreaIdA router running MPLS is configured to flood traffic-engineering for OSPF area csMplsOspfAreaId AreaID .1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.1 |
csMplsOspfAreaAdminStatusThis entry is used to indicate if mpls is enabled or disabled on area. This entry is used in conjunction with csMplsOspfAreaId.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.2 |
csMplsOspfExtensionsRowStatusThe existence state of this table. This object follows the Row Status behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.2.7.1.3 |
csMplsOspfExtensionsTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.2.8 |
csTeLdpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.10.3 |
csLdpVrConfTableThis table is used to provide LDP related functionality at the router level SEQUENCE OF CsLdpVrConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.3.1 |
csLdpVrConfEntryThis entry is indexed by the VPN and VR ID CsLdpVrConfEntry .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1 |
csLdpVrConfRowStatusThe existence state of this table. This object follows the Row Status behaviourrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.1 |
csLdpVrAdminStatusIndicates the administrator's intent as to whether LDP should be enabled or disabled on this router.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.2 |
csLdpVrEventLogLevelThis specifies the level of detail for the event log.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.3 |
csLdpVrEventLogAreaEach bit within this object enables loggin for a specific area within LDP. Below is a list of the different areas available for logging within LDP and their corresponding bits identifiers. area bit ----------------------------------------------------- all 1 adjacency 2 packet-receive 3 packet-send 4 session 5 packet-verbose 6 lsp 7 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.4 |
csLdpVrEventLogAreaMaskcsLdpVrEventLogAreaMask is used to indicate which area bit is being set to on/off. Below is a list of the different areas available for logging within LDP and their corresponding bits identifiers. area bit ----------------------------------------------------- all 1 adjacency 2 packet-receive 3 packet-send 4 session 5 packet-verbose 6 lsp 7 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.5 |
csLdpVrRoutePreferenceRoute preference Value for LDP routesrw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.6 |
csLdpVrAutorouteAnnounceIndicates the administrator's intent to let BGP use LDP LSP's present in MPLS RIB for the bgp-next-hop resolutionrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.7 |
csLdpVrVpnAutorouteAnnounceIndicates the administrator's intent to let Vpn use LDP LSP's present in MPLS RIB for the vpn-next-hop resolutionrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.8 |
csLdpVrPwe3AutorouteAnnounceIndicates the administrator's intent to let PWE3 use LDP LSP's present in MPLS RIB for the next-hop resolutionrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.9 |
csLdpVrAcceptTargetedHellosIndicates the targeted hellos are accepeted or rejectedrwobsolete Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.1.1.10 |
csLdpVrConfTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.2 |
csLdpEntityTableThis table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR). SEQUENCE OF CsLdpEntityEntry .1.3.6.1.4.1.3085.3.1.4.2.10.3.3 |
csLdpEntityEntryAn entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. CsLdpEntityEntry .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1 |
csLdpEntityIndexThis index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'csLdpEntityIndexNext' object should be retrieved. That value should be used for the value of this index when creating a row in this table. (NOTE: if a value of zero (0) is retrieved, that indicates that no rows can be created in this table at this time. A secondary index (this object) is needed by some but not all, LDP implementations. For example in an LDP implementation which uses PPP, this index may be needed. Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.1 |
csLdpEntityRowStatusAn object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'csLdpEntityAdminStatus' object has the value of 'up' and this object has the value of 'active' then the Entity will atttempt to contact an LDP Peer. If the value of this object is changed to 'notInService', then the Entity looses contact with the LDP Peer and all information related to that Peer must be removed from the MIB. This has the same effect as changing 'csLdpEntityAdminStatus' from 'enable' to 'disable'. When this object is set to 'active' and the value of the 'csLdpEntityAdminStatus' is 'enable' then this Entity will attempt to contact the Peer and establish new sessions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.2 |
csLdpEntityAdminStatusThe administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer (which implies that the 'csLdpEntityRowStatus' object has been set to 'active'), then all contact with that Peer is lost and all information from that Peer needs to be removed from the MIB. At this point the user is able to change values which are related to this entity. When the admin status is set back to 'up', then this Entity will attempt to establish new sessions with the Peer.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.3 |
csLdpEntityHelloTimerConfigures the interval in seconds between LDP hello's on this interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.4 |
csLdpEntityHelloHoldTimerThe two octet value which is the proposed Hello hold timer for this LDP Entity. A value of 0 means use the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 means infinite.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.5 |
csLdpEntityKeepAliveTimerConfigures the interval in seconds between keepalive messages on this interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.6 |
csLdpEntityKeepAliveHoldTimerThe two octet value which is the proposed keep alive hold timer for this LDP Entity.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.7 |
csLdpEntityTransportAddrThis is used to store transport ip address for LDP Entityrw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.10.3.3.1.8 |
csLdpTargetTableThis table contains information about the MPLS Label Distribution Protocol Targeted Sessions which exist on this Label Switch Router (LSR).obsolete SEQUENCE OF CsLdpTargetEntry .1.3.6.1.4.1.3085.3.1.4.2.10.3.4 |
csLdpTargetEntryAn entry in this table represents an LDP Targeted Session. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP.obsolete CsLdpTargetEntry .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1 |
csLdpTargetPeerIpAddrThis index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'csLdpTargetIndexNext' object should be retrieved. That value should be used for the value of this index when creating a row in this table. (NOTE: if a value of zero (0) is retrieved, that indicates that no rows can be created in this table at this time. A secondary index (this object) is needed by some but not all, LDP implementations. For example in an LDP implementation which uses PPP, this index may be needed.obsolete IpAddress .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.1 |
csLdpTargetRowStatusAn object that allows entries in this table to be created and deleted using the RowStatus convention. Once the 'csLdpTargetAdminStatus' object has the value of 'up' and this object has the value of 'active' then the Session will atttempt to contact an LDP Peer. If the value of this object is changed to 'notInService', then the Session looses contact with the LDP Peer and all information related to that Peer must be removed from the MIB. This has the same effect as changing 'csLdpTargetAdminStatus' from 'enable' to 'disable'. When this object is set to 'active' and the value of the 'csLdpTargetAdminStatus' is 'enable' then this Session will attempt to contact the Peer and establish new sessions.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.2 |
csLdpTargetAdminStatusThe administrative status of this LDP Targeted Session. If this object is changed from 'enable' to 'disable' and this Session has already attempted to establish contact with a Peer (which implies that the 'csLdpTargetRowStatus' object has been set to 'active'), then all contact with that Peer is lost and all information from that Peer needs to be removed from the MIB. At this point the user is able to change values which are related to this entity. When the admin status is set back to 'up', then this Session will attempt to establish new sessions with the Peer.rwobsolete Enumeration .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.3 |
csLdpTargetHelloTimerConfigures the interval in seconds between LDP Targeted hello's on VRrwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.4 |
csLdpTargetHelloHoldTimerThe two octet value which is the proposed Hello hold timer for this LDP Targeted Session. A value of 0 means use the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 means infinite.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.5 |
csLdpTargetKeepAliveTimerConfigures the interval in seconds between keepalive messagesrwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.6 |
csLdpTargetKeepAliveHoldTimerThe two octet value which is the proposed keep alive hold timer for this LDP Targeted Session.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.7 |
csLdpTargetActiveIf TRUE indicates that this is an active targeted entity i.e a targeted neighbor is explictly configured through CLI. The value set to true while creating an targeted entityrwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.10.3.4.1.8 |
csOrionMplsEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.4.2.10.4 |
csOrionPPVpn OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.11 |
csOrionPPVpnObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.11.1 |
csVpnVrfTableThis table is used to configure RFC2547 VPN routing instances. Each instance represent the partication of this router as a VRF in an BGP/MPLS VPN provider edge (PE). A router can suppport multiple VPN routing instances to allow peering with with multiple VPN providers. SEQUENCE OF CsVpnVrfEntry .1.3.6.1.4.1.3085.3.1.4.2.11.1.1 |
csVpnVrfEntryEach entry contains information about a single RFC2547 BGP/MPLS VPN routing instance. CsVpnVrfEntry .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1 |
csVpnVrfNameThe name for this VPN instance. It can contain alphanumic characters and hiphens (-).rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.1 |
csVpnVrfDescriptionThe description for this instance.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.2 |
csVpnVrfProviderNameThe name of the VPN Service Provider VR for this instance. Multiple Service Provider names can be specified by separating them using spaces. The VRF instance will select to use one of these providers. If the selected provider connectivity not active then the VRF instance will select another provider from its list. A VRF peers with only one provider at any time.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.3 |
csVpnVrfRouteDistinguisherThe route distinguisher for this VPN customer instance.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.4 |
csVpnVrfAdminStatusThe enable/disable status of this VPN customer instance.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.5 |
csVpnVrfLogAreaFlagEach bit within this object enables logging for a specific area within the VPN routing instance. Below is a list of the different areas available for logging: area bit ------------------------------------------------------ system 0 routes-receive 1 routes-send 2 vpn-sp (control interface to VPN-SP) 3 end of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.6 |
csVpnVrfLogLevelFlagThis object enables logging at a specific level.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.7 |
csVpnVrfPreferenceThis default preference value for routes added by the instance to the RIB. A value of -1 indicates that this attribute is not configured.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.8 |
csVpnVrfRowStatusThe variable is used to create, modify or delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.9 |
csVpnVrfSiteOfOriginThe site-f-origin extended community attribute for this VPN customer instance.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.10 |
csVpnVrfAllowASInTo allow duplicate AS numbers for the BGP VPN routes received by this VRF. This attribute specifies the number of duplicates which are permitted. By default duplocate ASNs are not permitted. This attribute is used only if the VR is configured with an ASN, i.e., BGP is enabled.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.11 |
csVpnVrfASOverrideTo allow the VPN service provider VR to override a VRF's ASN with the provders ASN. This option is normally used along with the site-of-origin option.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.12 |
csVpnVrfMaxRoutesThe maximum number of routes the VRF instance is allowed to add to the RIB. A value of -1 indicates that this attribute is not set, i.e., no maximum is configured.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.13 |
csVpnVrfMaxRoutesExceedActionThe action to take if the number of routes exceed the csVpnVrfMaxRoutes configured for this VRF. discard: Routes are rejected with an error mesaage warning-message: Routes are accepted but a warning message is displayed.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.11.1.1.1.14 |
csVpnVrfRouteTargetTableThis table is used to configure import/export route targets for RFC2547 VPN routing instances (VRFs). SEQUENCE OF CsVpnVrfRouteTargetEntry .1.3.6.1.4.1.3085.3.1.4.2.11.1.2 |
csVpnVrfRouteTargetEntryEach entry contains information about a single route target. It is an 8-byte value. Also, each entry indicates if it is an import or export route target CsVpnVrfRouteTargetEntry .1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1 |
csVpnVrfRouteTargetTypeThe type of Route Target entry. Enumeration .1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.1 |
csVpnVrfRouteTargetValueThe route target value. It is an extended community encoded as an 8-byte value. An extended community is specified either as <4-byte-ip-address>:<2-byte num> or as <2-byte AS-num>:<4-byte-num>. OCTET STRING .1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.2 |
csVpnVrfRouteTargetRowStatusThe variable is used to create, modify or delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.11.1.2.1.3 |
csOrionPbf OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.12 |
csOrionViPbfFilterTableThis table specifies a set of acl's to be applied to packets received over an interface. The first entry whose ACL matches a packet causes the packet to be forwarded over the specified next-hop. SEQUENCE OF CsOrionViPbfFilterEntry .1.3.6.1.4.1.3085.3.1.4.2.12.1 |
csOrionViPbfFilterEntryEach filter specifies whether packets matching a specific access list entry are forwarded to the specified next hop. CsOrionViPbfFilterEntry .1.3.6.1.4.1.3085.3.1.4.2.12.1.1 |
csOrionViPbfFilterIndexThe Index of this particular PBF Filter. Integer32 .1.3.6.1.4.1.3085.3.1.4.2.12.1.1.1 |
csOrionViPbfFilterAclIdThe Id of an access list entry (from csOrionGenAclTable).rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.12.1.1.2 |
csOrionViPbfFilterEgressViIdThe index value to uniquely identify the local interface through which the next hop for matching flows should be reached. This field is valid for VIs connected to point-point links only. A value of 0 (zero) indicates the next-hop-vi is not specified.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.12.1.1.3 |
csOrionViPbfFilterNextHopIpAddrThe IP address of the next hop of this route. A value of 0 (zero) indicates the next-hop-addr is not specified.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.12.1.1.4 |
csOrionViPbfFilterActionThe action performed by this filter.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.12.1.1.5 |
csOrionViPbfFilterRowStatusA row status type for this Table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.12.1.1.6 |
csOrionViPbfFilterCounterEnable or disable counter on this filter.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.12.1.1.7 |
csOrionIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.13 |
csIgmpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.13.1 |
csIgmpInterfaceTableThe (conceptual) table listing the interfaces on which IGMP is enabled. SEQUENCE OF CsIgmpInterfaceEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.1 |
csIgmpInterfaceEntryAn entry (conceptual row) representing an interface on which IGMP is enabled. CsIgmpInterfaceEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1 |
csIgmpInterfaceIfIndexThe ifIndex value of the interface for which IGMP is enabled. InterfaceIndex .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.1 |
csIgmpInterfaceQueryIntervalThe frequency at which IGMP Host-Query packets are transmitted on this interface.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.2 |
csIgmpInterfaceStatusThe activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.3 |
csIgmpInterfaceVersionThe version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the same version of IGMP on that LAN.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.4 |
csIgmpInterfaceQuerierThe address of the IGMP Querier on the IP subnet to which this interface is attached.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.5 |
csIgmpInterfaceQueryMaxResponseTimeThe maximum query response time advertised in IGMPv2 queries on this interface.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.6 |
csIgmpInterfaceQuerierUpTimeThe time since csIgmpInterfaceQuerier was last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.7 |
csIgmpInterfaceQuerierExpiryTimeThe amount of time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of this object is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.8 |
csIgmpInterfaceVersion1QuerierTimerThe time remaining until the host assumes that there are no IGMPv1 routers present on the interface. While this is non- zero, the host will reply to all queries with version 1 membership reports.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.9 |
csIgmpInterfaceWrongVersionQueriesThe number of queries received whose IGMP version does not match csIgmpInterfaceVersion, over the lifetime of the row entry. IGMP requires that all routers on a LAN be configured to run the same version of IGMP. Thus, if any queries are received with the wrong version, this indicates a configuration error.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.10 |
csIgmpInterfaceJoinsThe number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache Table. This object gives an indication of the amount of IGMP activity over the lifetime of the row entry.ro Counter32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.11 |
csIgmpInterfaceProxyIfIndexSome devices implement a form of IGMP proxying whereby memberships learned on the interface represented by this row, cause IGMP Host Membership Reports to be sent on the interface whose ifIndex value is given by this object. Such a device would implement the csIgmpV2RouterMIBGroup only on its router interfaces (those interfaces with non-zero csIgmpInterfaceProxyIfIndex). Typically, the value of this object is 0, indicating that no proxying is being done.rw InterfaceIndexOrZero .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.12 |
csIgmpInterfaceGroupsThe current number of entries for this interface in the Cache Table.ro Gauge32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.13 |
csIgmpInterfaceRobustnessThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.14 |
csIgmpInterfaceLastMembQueryIntvlThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if csIgmpInterfaceVersion is 1.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.15 |
csIgmpInterfaceMulticastTTLThresholdThe Multicast TTL threshold value to be used by IGMP forwarding. This value is used to contol multicast packets from going beyone a certain number of routers.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.16 |
csIgmpInterfaceAdminStatusThis attribute controls the enable/disable settings of an IGMP or IGMP Proxy interface. If this attribute is set to disable, the interface configuration will be saved.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.13.1.1.1.17 |
csIgmpCacheTableThe (conceptual) table listing the IP multicast groups for which there are members on a particular interface. SEQUENCE OF CsIgmpCacheEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.2 |
csIgmpCacheEntryAn entry (conceptual row) in the csIgmpCacheTable. CsIgmpCacheEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1 |
csIgmpCacheAddressThe IP multicast group address for which this entry contains information. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.1 |
csIgmpCacheIfIndexThe interface for which this entry contains information for an IP multicast group address. InterfaceIndex .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.2 |
csIgmpCacheSelfAn indication of whether the local system is a member of this group address on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.3 |
csIgmpCacheLastReporterThe IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this object has the value 0.0.0.0.ro IpAddress .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.4 |
csIgmpCacheUpTimeThe time elapsed since this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.5 |
csIgmpCacheExpiryTimeThe minimum amount of time remaining before this entry will be aged out. A value of 0 indicates that the entry is only present because csIgmpCacheSelf is true and that if the router left the group, this entry would be aged out immediately. Note that some implementations may process membership reports from the local system in the same way as reports from other hosts, so a value of 0 is not required.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.6 |
csIgmpCacheStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.7 |
csIgmpCacheVersion1HostTimerThe time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.13.1.2.1.8 |
csIgmpStaticGroupTableThe (conceptual) table listing the IP multicast static groups to which traffic needs to be sent to even if IGMP is not enabled on the respective interface. SEQUENCE OF CsIgmpStaticGroupEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.3 |
csIgmpStaticGroupEntryAn entry (conceptual row) in the csIgmpStaticGroupTable. CsIgmpStaticGroupEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1 |
csIgmpStaticGroupIfIndexThe interface for which the static group has been configured. InterfaceIndex .1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.1 |
csIgmpStaticGroupAddressThe IP multicast group address which corresponds to the configured static group. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.2 |
csIgmpStaticGroupStatusThe activation of a row enables a static group configuration on the interface. The destruction of a row disables the static group configuration on the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.13.1.3.1.3 |
csIgmpAccessGroupTableThe (conceptual) table listing the IP multicast access groups to which traffic needs to be sent to or rejected from. This table will usually be used to reject traffic to a particular set of multicast groups SEQUENCE OF CsIgmpAccessGroupEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.4 |
csIgmpAccessGroupEntryAn entry (conceptual row) in the csIgmpAccessGroupTable. CsIgmpAccessGroupEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1 |
csIgmpAccessGroupIfIndexThe interface for which the access group has been configured. InterfaceIndex .1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.1 |
csIgmpAccessGroupAddressThe IP multicast group address which corresponds to the configured access group. IpAddress .1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.2 |
csIgmpAccessGroupStatusThe activation of a row enables a access group configuration on the interface. The destruction of a row disables the access group configuration on the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.13.1.4.1.3 |
csIgmpGeneralTableMIB object to control router level attributes of IGMP. SEQUENCE OF CsIgmpGeneralEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.5 |
csIgmpGeneralEntryInformation regarding the router level attributes of IGMP. CsIgmpGeneralEntry .1.3.6.1.4.1.3085.3.1.4.2.13.1.5.1 |
csIgmpGeneralEntryRowStatusThe activation of a row enables an IGMP object for the router. The destruction of a row destroys the IGMP object for this router.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.13.1.5.1.1 |
csOrionPWE3 OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.14 |
csOrionPWE3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.2.14.1 |
csPwVcTableThis table specifies information for connecting various emulated services to various tunnel type. SEQUENCE OF CsPwVcEntry .1.3.6.1.4.1.3085.3.1.4.2.14.1.1 |
csPwVcEntryA row in this table represents an emulated virtual connection (VC) across a packet network. It is indexed by: - The csPwVcIndex. Uniquely identifying a singular connection (or set of connections). If a set, individual VCs are identified by the Instance. CsPwVcEntry .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1 |
csPwVcIndexPrimary index for the conceptual row identifying a VC (or set of VCs) within this PW Emulation VC table. PwVcIndex .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.1 |
csPwVcIDUsed in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used.rw PwVcID .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.2 |
csPwVcOutboundGroupIDUsed in the outbound Group ID field within the 'Virtual Circuit FEC Element' when some control methods (for example LDP) is used for VC setup, zero if not used.ro PwGroupID .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.3 |
csPwVcInboundGroupIDObtained from the inbound Group ID field in the remote 'Virtual Circuit FEC Element' as received by control methods are used for VC setup, zero if not used or not known yet.rw PwGroupID .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.4 |
csPwVcInboundMTUMTU of the interface at the remote PE. 0 means assume same as outbound MTUrw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.5 |
csPwVcPeerAddrTypeDenotes the address type of the peer node signaling address if PW signaling is used for the VC creation. It should be set to 'notApplicable' if PE/PW signaling is not used, i.e. csPwVcOwner is set to 'manual'.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.6 |
csPwVcPeerIpv4AddrIf csPwVcPeerAddrType is set to ipV4(1), then this value will contain the IPv4 address of the peer node PW/PE signaling entity. This object is otherwise insignificant and should contain a value of 0.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.7 |
csPwVcPeerIpv6AddrIf csPwVcPeerAddrType is set to ipV6(2), then this value will contain the Ipv6 address of the peer node PW/PE signaling entity. This object is otherwise insignificant and should contain a value of 0.rw IpAddress .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.8 |
csPwVcOutboundVcLabelThe VC label used in the outbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 16 bits Session ID.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.9 |
csPwVcInboundVcLabelThe VC label used in the inbound direction. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 16 bits Session ID.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.10 |
csPwVcInboundModeThis object is used to enable greater security for implementation that use global VC label space. In conservative mode, inbound packets with a VC label are accepted only from tunnels that are associated to the same VC via the inbound tunnel table. The entries in the inbound tunnel table are either explicitly configured or implicitly known by the control protocol used for VC set-up. If such association is not known, not configured or not desired, liberal mode should be configured, and the node should accept the packet based on the VC label only regardless of the outer tunnel used to carry the VC.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.11 |
csPwVcNameThe canonical name assigned to the VC. This name can be used to refer to the VC on the node console port.rw SnmpAdminString .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.12 |
csPwVcDescrA textual string containing information about the VC. If there is no description this object contains a zero length string.rw SnmpAdminString .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.13 |
csPwVcCreateTimeSystem time when this VC was created.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.14 |
csPwVcUpTimeNumber of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in csPwVcOperStatus.)ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.15 |
csPwVcTypeThis value dictates what service-specific tables are indexed by csPwVcIndex and csPwVcInstance. For example, if set for 'cem' csPwVcIndex indexes the csPwVcCemTable in [CEMMIB]. Note: CEM will also have the MSBit set in the VC type (0x8008). This is the 'Control Word' bit used within the 'Virtual Circuit FEC Element' when LDP signaling is usedrw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.16 |
csPwVcOwnerSet by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no signaling is used to set-up the VC, i.e. require configuration of all entries in the VC tables including VC labels, etc. The value 'signaling' is used in case of standard signaling of the VC for the specific PSN, for example LDP for MPLS PSN as specified in . Value 'other' is used for other types of signaling.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.17 |
csPwVcPsnTypeSet by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules. For example, if mpls(1) is defined, the agent create an entry in csPwVcMplsTable, which further define the MPLS PSN configuration.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.18 |
csPwVcPriorityThis object define the relative priority of the VC instance in a lowest-to-highest fashion. VC instances with the same priority are treated with equal priority (i.e. are signaled in parallel). VC instances dropped will be set 'dormant' (as indicated in csPwVcOperStatus).rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.19 |
csPwVcAdminStatusThe desired operational status of this VC. It is set by the operator if csPwVcIsIf is set to false. Otherwise, it reflects the ifIndex AdminStatus.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.20 |
csPwVcOperStatusIndicates the actual combined operational status of this VC. It is 'up' if both csPwVcInboundOperStatus and csPwVcOutboundOperStatus are in 'up' state. For all other values, if the VCs in both directions are of the same value it reflects that value, otherwise it is set to 'unknown', and the operator may consult the per direction OperStatus for fault isolation.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.21 |
csPwVcInboundOperStatusIndicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.22 |
csPwVcOutboundOperStatusIndicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.23 |
csPwVcRowStatusFor creating, modifying, and deleting this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.24 |
csPwVcStorageTypeThis variable indicates the storage type for this object.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.25 |
csPwVcCeIntfThis object is used to identify the CE interface. This format allows for many formats. We only support LI for now. The format used for this ascii-string valued object is as follows: 'B|L VPNID|SlotID/VRID|PortID/VIID|LLID:BIID' Where 'B' indicates the other end is a Bridge Interface. 'L' indicates this connection maps to a Logical Link. 'VPNID' is a Virtual Private Network ID. 'SlotID' identifies a specific slot on the Orion Box. 'VRID' is a Virtual Router ID for the VPN specified by VPNID. 'PortID' identifies a specific Port on the blade installed in the previously identified slot. 'VIID' is a Virtual Interface on the VR identified by VRID. 'LLID' is a Logical Link ID on PortID. ID is the bridge interface ID. For example, if this connection maps to a bridge interface. (BI 3 on VI number 1 on VR 1.2.3.4 on VPN 4), this object might be set to this value: 'B 4/1.2.3.4/1:3' If this connection maps to subinterface 20 on Logical Link 100 on Port 2 of Slot 2, this object might be set to this value: 'L 2/2:100:10' If this Virtual Interface has not been mapped, this object will have the value 'DISCONNECTED'.rw DisplayString .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.26 |
csPwVcForwardSlotSlot number of the data forwarding processor engine. 0 means not set.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.27 |
csPwVcForwardPEProcessor engine number of the data forwarding processor engine. 0 means not set.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.28 |
csPwVcCtrlWordInclude and except control word in the data packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.29 |
csPwVcSeqNumberInclude and check the sequence numbers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.30 |
csPwVcTestResultThe result of the previous testing request.rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.31 |
csPwVcVlanIdThe result of the previous testing request. Note: A valid VLAN ID should be provided if Connected to a BI.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.32 |
csPwVcCustomerIdCustomer ID field.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.33 |
csPwVcCustomerNameCustomer name field.rw SnmpAdminString .1.3.6.1.4.1.3085.3.1.4.2.14.1.1.1.34 |
csPwe3ConfTableThis table is used to Configure Mpls on a Virtual Router. SEQUENCE OF CsPwe3ConfEntry .1.3.6.1.4.1.3085.3.1.4.2.14.1.2 |
csPwe3ConfEntryThis entry is indexed by the VPN and VR ID CsPwe3ConfEntry .1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1 |
csPwe3EventLogLevelThis object is used to set the level of details for event logs for L2oL3rw Enumeration .1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.1 |
csPwe3EventLogAreaEach bit within this object enables logging for a specific area within the Pwe3 instance. Below is a list of the different areas available for logging: area bit ------------------------------------------------------ events 0 forwarding 1 end of description.rw Integer32 .1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.2 |
csPwe3ConfRowStatusThe existence state of this table. This object follows the Row Status behaviourrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.2.14.1.2.1.3 |
csOrionVPNNotifyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.3 |
csOrionChangeTableOIDObject identifier of the Table, which was changed.ro OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.3.1 |
csOrionChangeSourceThe source of the configuration change (illegal).ro Enumeration .1.3.6.1.4.1.3085.3.1.4.3.2 |
csOrionChangeSourceUserNameA textual string containing information about the user name of the source configuration change.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.4.3.3 |
csOrionLogLinkSlotIndexFor Logical Link up/down traps, this identifies the slot index of the Logical Link.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.4 |
csOrionLogLinkPortIndexFor Logical Link up/down traps, this identifies the port index (relative to the slot index) of the Logical Link.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.5 |
csOrionLogLinkChannelIndexFor Logical Link up/down traps, this identifies the channel index (relative to the slot/port index) of the Logical Link. If there is no channel, this object has the value -1.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.6 |
csOrionLogLinkSubIfIndexFor Logical Link up/down traps, this identifies the sub interface index (relative to the slot/port[:chan] index) of the Logical Link. If there is no sub interface, this object has the value -1.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.7 |
csOrionNumConfigChangesNumber of changed objects for which the csOrionConfigChange Trap PDU generated. This identifies the number of VarBinds follows this object in the csOrionConfigChange Trap PDU.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.8 |
csOrionConfigChangeTypeFor ConfigChange Traps, this identifies the type of change that was made on a table. For scalar objects, this always has the value 1.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.3.9 |
csOrionPortIndexFor port level alarms related traps, this identifies the port index (relative to the slot index) of the alarm origination.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.10 |
csOrionRestoreBladeStatusBlade Restoration status. Fail if blade is not restored successfully. Success if blade restoration is successfull. Cold-start if blade reboots. Note that cold-start will not have restored data presented in the trap packetro Enumeration .1.3.6.1.4.1.3085.3.1.4.3.11 |
csOrionRestoreSlotIndexSlot number of the affected blade.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.12 |
csOrionRestoreNumVRsNumber of VRs affected by this blade restoration trap. This corresponds the number of VPN/VRs that follows.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.13 |
csOrionAlarmTypeFor port level alarms related DS3 traps, this identifies the alarm which is cleared now.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.3.14 |
csOrionOc3AlarmTypeFor port level alarms related OC3 traps, this identifies the type of alarm being sent out.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.3.15 |
csOrionAlarmAffectTypeIndicates that it is a not service affecting alarm or a service affecting alarm.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.3.16 |
csOrionAlarmSeverityTypeIndicates the severity of this alarm.ro Enumeration .1.3.6.1.4.1.3085.3.1.4.3.17 |
csOrionLogLinkModuleIndexFor Logical Link up/down traps, this identifies the module index (relative to the slot index) of the Logical Link.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.18 |
csOrionModuleIndexFor Logical Link up/down traps, this identifies the module index (relative to the slot index) of the Logical Link.ro Integer32 .1.3.6.1.4.1.3085.3.1.4.3.19 |
csOrionVPNServerInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.4 |
csRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.4.1 |
csDnsServer OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.4.4.2 |
csOrionBladeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.5 |
csOrionBladeTableA list of Blades which belongs to Orion box. SEQUENCE OF CsOrionBladeEntry .1.3.6.1.4.1.3085.3.1.5.1 |
csOrionBladeEntryAn entry containing management information applicable to a particular Blade. CsOrionBladeEntry .1.3.6.1.4.1.3085.3.1.5.1.1 |
csOrionBladeSlotLocationSlot Location of the Blade in the Orion box.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.1.1.1 |
csOrionBladeDescrA textual string containing information about the blade. This string should include the name of the manufacturer and the product name.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.2 |
csOrionBladeTypeThe type of blade inserted in this slot.ro Enumeration .1.3.6.1.4.1.3085.3.1.5.1.1.3 |
csOrionBladeStateThe current state of this blade.ro Enumeration .1.3.6.1.4.1.3085.3.1.5.1.1.4 |
csOrionBladeEnginesNumbThe number of engines on the blade. NOTE: This object is not used.roobsolete Integer32 .1.3.6.1.4.1.3085.3.1.5.1.1.5 |
csOrionBladePortNumbThe number of ports on this blade (note, process blades have no ports).ro Integer32 .1.3.6.1.4.1.3085.3.1.5.1.1.6 |
csOrionBladeSerialNumbThe serial number of the blade. This is a series of alphanumeric characters which uniquely identifies this blade. NOTE: This object is not used.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.1.1.7 |
csOrionBladeHwVerA textual string containing information about the hardware revision version. NOTE: This object is not used.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.1.1.8 |
csOrionBladeSwVerA textual string containing information about the software revision version. NOTE: This object is not used.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.1.1.9 |
csOrionBladeResetThe software reset for this blade. It is an action object such that when set to 'reset' will reset this blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none'.rw Enumeration .1.3.6.1.4.1.3085.3.1.5.1.1.10 |
csOrionBladeConfigAttributesContains the configured or static parameters of this blade. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionBladeModelNumb.rodeprecated OCTET STRING .1.3.6.1.4.1.3085.3.1.5.1.1.11 |
csOrionBladeOperAttributesContains the operational or dynamic parameters of this blade. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionBladeTemperatureSensor1.rodeprecated OCTET STRING .1.3.6.1.4.1.3085.3.1.5.1.1.12 |
csOrionBladeModelNumbA textual string containing information about the model number of the blade.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.13 |
csOrionBladeCLEICodeA textual string containing information about the CLEI of the blade.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.14 |
csOrionBladeFPGAVersionA textual string containing information about the FPGA version of the blade.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.15 |
csOrionBladePort1MacAddrMAC Address of ethernet port 1 on the blade. Applies only to control or ethernet blade.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.1.1.16 |
csOrionBladePort2MacAddrMAC Address of ethernet port 2 on the blade. Applies only to control or ethernet blade.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.1.1.17 |
csOrionBladePort3MacAddrMAC Address of ethernet port 3 on the blade. Applies only to control or ethernet blade.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.1.1.18 |
csOrionBladePort4MacAddrMAC Address of ethernet port 4 on the blade. Applies only to control or ethernet blade.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.1.1.19 |
csOrionBladeIPSXLoaderProductA textual string containing information about the IPSX loader.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.20 |
csOrionBladeIPSXLoaderVersionA textual string containing information about the version of the loader NOTE: This object is not used.roobsolete DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.21 |
csOrionBladeIPSXLoaderDateA textual string containing information about the date of the loader. NOTE: This object is not used.roobsolete DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.22 |
csOrionBladeIPSXLoaderTimeA textual string containing information about the time of the loader.roobsolete DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.23 |
csOrionBladeTemperatureSensor1A textual string containing information about the temperature of sensor 1.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.24 |
csOrionBladeTemperatureSensor2A textual string containing information about the temperature of sensor 2.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.25 |
csOrionBladeTemperatureSensor3A textual string containing information about the temperature of sensor 3.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.26 |
csOrionBladeTemperatureSensor4A textual string containing information about the temperature of sensor 4.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.27 |
csOrionBladeShutdownThe software shutdown for this blade. It is an action object such that when set to 'shutdown' will stop the file-system on this blade. Setting it to 'none' has no effect, and when it is retrieved the value will always be 'none'.rw Enumeration .1.3.6.1.4.1.3085.3.1.5.1.1.28 |
csOrionBladeNumSharcCryptoNumber of crypto modules present on the sharc bladero Integer32 .1.3.6.1.4.1.3085.3.1.5.1.1.29 |
csOrionBladeSharcCryptoModuleId1Blade port in which the first crypto is present (Note, -1 indicates that there are no crypto modules in the blade)ro Integer32 (-1..5) .1.3.6.1.4.1.3085.3.1.5.1.1.30 |
csOrionBladeSharcCryptoModuleId2Blade port in which the first crypto is present (Note, -1 indicates that there are one or less crypto modules in the blade)ro Integer32 (-1..5) .1.3.6.1.4.1.3085.3.1.5.1.1.31 |
csOrionBladeSharcCryptoType1Type of the first sharc crypto module presentro Enumeration .1.3.6.1.4.1.3085.3.1.5.1.1.32 |
csOrionBladeSharcCryptoType2Type of the second sharc crypto module presentro Enumeration .1.3.6.1.4.1.3085.3.1.5.1.1.33 |
csOrionBladeSharcCryptoSerial1The serial number of the first sharc crypto module - series of alphanumeric characters which uniquely identifies the crypto module on this blade.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.34 |
csOrionBladeSharcCryptoSerial2The serial number of the second sharc crypto module - series of alphanumeric characters which uniquely identifies the crypto module on this blade.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.35 |
csOrionBladeSharcCryptoAssembly1The assembly number of the first sharc crypto modulero DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.36 |
csOrionBladeSharcCryptoAssembly2The assembly number of the second sharc crypto modulero DisplayString .1.3.6.1.4.1.3085.3.1.5.1.1.37 |
csOrionEngineTableA list of Process Engines such as CPU, Search Engine and Encryption Engine which exist in the Orion box. This table is used as csOrionModuleTable. Engine becomes a special type of Module. Module can also be a network interface. To keep the minimum change in 3.0 for the addition of module and maintain the compatibility between 3.0 and 3.1, the name of csOrionEngineTable is still used in 3.0. After 3.1, this table will be rename as csOrionModuleTable. SEQUENCE OF CsOrionEngineEntry .1.3.6.1.4.1.3085.3.1.5.2 |
csOrionEngineEntryAn entry containing management information applicable to a particular process engine. CsOrionEngineEntry .1.3.6.1.4.1.3085.3.1.5.2.1 |
csOrionEngineIndexA unique value for each engine. Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.1 |
csOrionEngineMemorySizeThe size of the memory for the specified Engine, in bytes. NOTE: This object is not used.roobsolete Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.2 |
csOrionEngineMemoryUtilThe current percentage utilization of the memory for the specified Engine.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.3 |
csOrionEngineTypeA type of the process engine.ro Enumeration .1.3.6.1.4.1.3085.3.1.5.2.1.5 |
csOrionEngineDescrA textual string containing information about the process engine manufacturer and the product name. NOTE: This object is not used.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.5.2.1.6 |
csOrionEngineUtilizationA % utilization for the specified Engine.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.7 |
csOrionEngineTemperatureA temperature (in Fahrenheit or Celsius near the specified Engine. NOTE: This object is not used.roobsolete Integer32 (-67..257) .1.3.6.1.4.1.3085.3.1.5.2.1.8 |
csOrionEngineStateThe current state of this engine.ro Enumeration .1.3.6.1.4.1.3085.3.1.5.2.1.9 |
csOrionEngineConfigAttributesContains the configured or static parameters of this engine. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionEngineLoaderProduct.rodeprecated OCTET STRING .1.3.6.1.4.1.3085.3.1.5.2.1.10 |
csOrionEngineOperAttributesContains the operational or dynamic parameters of this engine. Each parameter is represented by a type-lenth-value data structure. A single TLV may contain individual TLVs. The types IDs currently supported are : 1 - Description (string) [sample only] more parameters will be added. NOTE: This object is deprecated and is replaced by individual objects starting from csOrionEngineMemoryAllocs.rodeprecated OCTET STRING .1.3.6.1.4.1.3085.3.1.5.2.1.11 |
csOrionEngineLoaderProductA textual string containing information about the engine loader.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.12 |
csOrionEngineLoaderVersionA textual string containing information about the version of the loader.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.13 |
csOrionEngineLoaderDateA textual string containing information about the date of the loader.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.14 |
csOrionEngineLoaderTimeA textual string containing information about the time of the loader.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.15 |
csOrionEngineApplicationProductA textual string containing information about the application.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.16 |
csOrionEngineApplicationVersionA textual string containing information about the version of the application.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.17 |
csOrionEngineApplicationDateA textual string containing information about the date of the application.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.18 |
csOrionEngineApplicationTimeA textual string containing information about the time of the application.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.19 |
csOrionEngineSerialNumbThe serial number of the engine. This is a series of alphanumeric characters which uniquely identifies the engine on this blade.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.20 |
csOrionEngineAssemblyNumbThe assembly number of the engine.ro DisplayString .1.3.6.1.4.1.3085.3.1.5.2.1.21 |
csOrionEngineCpuTypeThe type of cpu for the engine.ro Enumeration .1.3.6.1.4.1.3085.3.1.5.2.1.22 |
csOrionEngineCpuVersionThe CPU version of the engine.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.23 |
csOrionEngineDataCacheSizeData cache size of the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.24 |
csOrionEngineInstructionCacheSizeInstruction cache size of the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.25 |
csOrionEngineSecondaryCacheSizeSecondary cache size of the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.26 |
csOrionEngineLevel3CacheSizeLevel 3 cache size of the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.27 |
csOrionEngineMemoryAllocsMemory allocated for the engine.ro Gauge32 .1.3.6.1.4.1.3085.3.1.5.2.1.28 |
csOrionEngineMemoryAllocFailuresMemory allocation failures for the engine.ro Gauge32 .1.3.6.1.4.1.3085.3.1.5.2.1.29 |
csOrionEngineMemoryFreesMemory freed for the engine.ro Gauge32 .1.3.6.1.4.1.3085.3.1.5.2.1.30 |
csOrionEngineMemoryBadFreesMemory free failures for the engine.ro Gauge32 .1.3.6.1.4.1.3085.3.1.5.2.1.31 |
csOrionEngineMemoryBytesAllocsBytes allocated for the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.32 |
csOrionEngineMemoryBytesFreedBytes freed for the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.33 |
csOrionEngineFreeMemoryFree memory for the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.34 |
csOrionEngineLargestFreeMemorySize of the largest free memory block for the engine.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.3085.3.1.5.2.1.35 |
csOrionEngineFreeMemoryMediumFree memory, in 100 KByte unit, averaged over the last 30 seconds.ro Gauge32 UNITS "100 kbyte" .1.3.6.1.4.1.3085.3.1.5.2.1.36 |
csOrionEngineFreeMemoryLongFree memory, in 100 KByte unit, averaged over the last 10 minutes.ro Gauge32 UNITS "100 kbyte" .1.3.6.1.4.1.3085.3.1.5.2.1.37 |
csOrionEngineUtilizationMediumCPU utilization averaged over the last 30 seconds.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.38 |
csOrionEngineUtilizationLongCPU utilization averaged over the last 10 minutes.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.39 |
csOrionEngineForwardingModePacket Forarding Mode for the Engine,HW Prefix,HW Flow,SW Passthroughrw Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.40 |
csOrionEngineOsVersionThe OS version of the engine/module.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.2.1.41 |
csOrionServiceQueueInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.5.3 |
csOrionQueueGroupTableA list of group of queues found in every blade SEQUENCE OF CsOrionQueueGroupEntry .1.3.6.1.4.1.3085.3.1.5.3.1 |
csOrionQueueGroupEntryAn entry containing management information applicable to a particular group of queue. CsOrionQueueGroupEntry .1.3.6.1.4.1.3085.3.1.5.3.1.1 |
csOrionQueueGroupTypeIndicates the type of queue group. 'systemQueue' is a group of queue used by the system as it sends out packets to the backplane. 'portQueue' is used by the the interface ports. Enumeration .1.3.6.1.4.1.3085.3.1.5.3.1.1.1 |
csOrionQueueGroupIdA unique id for each group of Queues. Currently (March 2001, for Release 3.0), there is only one group of queues to be shared by all ports/interfaces. And also one group of queues used to send out packets to the packet-ring. A future hardware version could come up with one group of queues per port, or multiple system queues. Our MIB model is ready for that. Integer32 .1.3.6.1.4.1.3085.3.1.5.3.1.1.2 |
csOrionQueueGroupPriorityIndexA unique id for each group of priority of Queues. Currently (July 2001, for Release 3.0), there is only four priority groups. Priority Group 1, 2 and 3 have 100% and priority group 4 a group of 5 queues. Integer32 .1.3.6.1.4.1.3085.3.1.5.3.1.1.3 |
csOrionQueueGroupSubGroupAllocationAn action object used to set the weigth of all queues that belong to the same group priority. It starts with octet 1 for the first queue and octet n-1 for the last queue. Each value will be propagated to the parameter csOrionQueueWeight of a specific csOrionQueueEntry. That should be used for reading. Currently(rel.3.0), a single priority group can have only a maximum of 5 queues. And, sum of percentage of all the Queues must not exceed 100%rw OCTET STRING .1.3.6.1.4.1.3085.3.1.5.3.1.1.4 |
csOrionQueueGroupOperStatusIndicates operational status of this queue group.ro OperStatus .1.3.6.1.4.1.3085.3.1.5.3.1.1.5 |
csOrionQueueGroupTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.5.3.2 |
csOrionQueueTableA list of individual queues in every csOrionGroupQueueTable SEQUENCE OF CsOrionQueueEntry .1.3.6.1.4.1.3085.3.1.5.3.3 |
csOrionQueueEntryAn entry containing management information applicable to a particular queue. CsOrionQueueEntry .1.3.6.1.4.1.3085.3.1.5.3.3.1 |
csOrionQueueIdA unique id for each queue. Currently(rel.3.0), there are only 8 queues in every group. Integer32 .1.3.6.1.4.1.3085.3.1.5.3.3.1.1 |
csOrionQueueClassOfServiceIdentifies a class of service this queue is handling.ro Enumeration .1.3.6.1.4.1.3085.3.1.5.3.3.1.2 |
csOrionQueueWeightWeight setting of this queue for scheduling expressed in percent. This can be modified along with other queues on the same priority group through the object csOrionQueueGroupPriorityAllocation.ro Integer32 .1.3.6.1.4.1.3085.3.1.5.3.3.1.3 |
csOrionQueueMinThresholdForRedMin threshold to start discarding the red packet. Represented as the percentage of the queue size, 256KB.rw INTEGER .1.3.6.1.4.1.3085.3.1.5.3.3.1.4 |
csOrionQueueMinThresholdForYellowMin threshold to start discarding the yellow packet. Represented as the percentage of the queue size, 256KB.rw INTEGER .1.3.6.1.4.1.3085.3.1.5.3.3.1.5 |
csOrionQueueMinThresholdForGreenMin threshold to start discarding the green packet. Represented as the percentage of the queue size, 256KB.rw INTEGER .1.3.6.1.4.1.3085.3.1.5.3.3.1.6 |
csOrionQueueMaxRandomForRedThe max_random for red puts a cap on the random number generated by hardware Represented in .rw INTEGER .1.3.6.1.4.1.3085.3.1.5.3.3.1.7 |
csOrionQueueMaxRandomForYellowThe max_random for yellow puts a cap on the random number generated by hardware Represented in .rw INTEGER .1.3.6.1.4.1.3085.3.1.5.3.3.1.8 |
csOrionQueueMaxRandomForGreenThe max_random for green puts a cap on the random number generated by hardware Represented in .rw INTEGER .1.3.6.1.4.1.3085.3.1.5.3.3.1.9 |
csOrionQueueMaxThresholdMax threshold to discarding packets (red, yellow and green). Represented as the percentage of the queue size, 256KB.rw INTEGER .1.3.6.1.4.1.3085.3.1.5.3.3.1.10 |
csOrionQueueTotalByteCountTotal number of bytes dropped.ro Counter32 .1.3.6.1.4.1.3085.3.1.5.3.3.1.11 |
csOrionQueuePacketCountTotal number of packets counted so far.ro Counter32 .1.3.6.1.4.1.3085.3.1.5.3.3.1.12 |
csOrionQueueAverageSizeAverage Queue Size at the present momentro Counter32 .1.3.6.1.4.1.3085.3.1.5.3.3.1.13 |
csOrionBladeInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.5.4 |
csOrionServiceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6 |
csOrionAccessListInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.1 |
csOrionAccessListTableA list of Access List Entries. SEQUENCE OF CsOrionAccessListEntry .1.3.6.1.4.1.3085.3.1.6.1.1 |
csOrionAccessListEntryAn entry containing filtering information used to classify packets. CsOrionAccessListEntry .1.3.6.1.4.1.3085.3.1.6.1.1.1 |
csOrionAccessListIdAn identifier for this Access List Entry. Integer32 .1.3.6.1.4.1.3085.3.1.6.1.1.1.1 |
csOrionAccessListStartAddressrw IpAddress .1.3.6.1.4.1.3085.3.1.6.1.1.1.2 |
csOrionAccessListEndAddressrw IpAddress .1.3.6.1.4.1.3085.3.1.6.1.1.1.3 |
csOrionAccessListPoolIdThe NAT Pool that is used when NAT is performed on packets matching this access list.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.1.1.1.4 |
csOrionAccessListStatusThis object is used to create/delete entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.1.1.1.5 |
csOrionGenAclTableA list of Access List Entries. This is the table used by all the services (other than NAT) provided by Orion. SEQUENCE OF CsOrionGenAclEntry .1.3.6.1.4.1.3085.3.1.6.1.2 |
csOrionGenAclEntryAn entry containing filtering information used to classify packets. CsOrionGenAclEntry .1.3.6.1.4.1.3085.3.1.6.1.2.1 |
csOrionGenAclIdAn identifier for this Access List Entry. Integer32 .1.3.6.1.4.1.3085.3.1.6.1.2.1.1 |
csOrionGenAclSrcAddressrw IpAddress .1.3.6.1.4.1.3085.3.1.6.1.2.1.2 |
csOrionGenAclSrcMaskrw IpAddress .1.3.6.1.4.1.3085.3.1.6.1.2.1.3 |
csOrionGenAclDstAddressrw IpAddress .1.3.6.1.4.1.3085.3.1.6.1.2.1.4 |
csOrionGenAclDstMaskrw IpAddress .1.3.6.1.4.1.3085.3.1.6.1.2.1.5 |
csOrionGenAclProtThe Protocol ID that a packet must contain to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.1.2.1.6 |
csOrionGenAclTosThe Type of Service that a packet must contain to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.rw Integer32 (-1..255) .1.3.6.1.4.1.3085.3.1.6.1.2.1.7 |
csOrionGenAclStartSrcPortThe beginning of a range of ports that a packet's source port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.1.2.1.8 |
csOrionGenAclEndSrcPortThe end of a range of ports that a packet's source port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.1.2.1.9 |
csOrionGenAclStartDstPortThe beginning of a range of ports that a packet's destination port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.1.2.1.10 |
csOrionGenAclEndDstPortThe end of a range of ports that a packet's destination port must satisfy to match this access list entry. The value -1 represents a wildcard for this General Access List parameter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.1.2.1.11 |
csOrionGenAclStatusThis object is used to create/delete entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.1.2.1.12 |
csOrionGenAclSrcAddressListThe name of the address-list representing all source addresses For the GAL to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute being equal to the value of this attributerw DisplayString .1.3.6.1.4.1.3085.3.1.6.1.2.1.13 |
csOrionGenAclDstAddressListThe name of the address-list representing all destination addresses For the GAL to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute being equal to the value of this attributerw DisplayString .1.3.6.1.4.1.3085.3.1.6.1.2.1.14 |
csOrionGenAclSrcPortListThe name of the numeric-list representing all source ports. For the GAL to be operational there should be at least one entry in the csOrionNumericListTable table with its csOrionNumericListName attribute being equal to the value of this attribute.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.1.2.1.15 |
csOrionGenAclDstPortListThe name of the numeric-list representing all source ports. An empty string represents a wildcard for this General Access List parameter. For the GAL to be operational there should be at least one entry in the csOrionNumericListTable table with its csOrionNumericListName attribute being equal to the value of this attribute.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.1.2.1.16 |
csOrionGenAclTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.1.3 |
csOrionAddressListTableThis table stores named lists of IP addresses. An address is specified as an IP address and mask. Each table entry constitutes a single address. SEQUENCE OF CsOrionAddressListEntry .1.3.6.1.4.1.3085.3.1.6.1.4 |
csOrionAddressListEntryEach entry contains information about a single address CsOrionAddressListEntry .1.3.6.1.4.1.3085.3.1.6.1.4.1 |
csOrionAddressListNameThe name of the address-list. A name shall only contain alphanumeric characters and hyphens. DisplayString .1.3.6.1.4.1.3085.3.1.6.1.4.1.1 |
csOrionAddressListIpAddressThe IP address for this entry. IpAddress .1.3.6.1.4.1.3085.3.1.6.1.4.1.2 |
csOrionAddressListMaskThe mask for this entry. IpAddress .1.3.6.1.4.1.3085.3.1.6.1.4.1.3 |
csOrionAddressListRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.1.4.1.4 |
csOrionAddressListTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.1.5 |
csOrionNumericListTableThis table stores named lists of integers. A numeric-list is a named list that includes discreet integers or integer ranges. A numeric-list is typed: Initally a single type has been identified for using numeric-lists to represent port-lists. SEQUENCE OF CsOrionNumericListEntry .1.3.6.1.4.1.3085.3.1.6.1.6 |
csOrionNumericListEntryEach entry specifies a single numeric specification: a discreet integer or a range of contiguous integers. CsOrionNumericListEntry .1.3.6.1.4.1.3085.3.1.6.1.6.1 |
csOrionNumericListTypeThe match type for this entry: port: this numeric list represents a list of ports. Enumeration .1.3.6.1.4.1.3085.3.1.6.1.6.1.1 |
csOrionNumericListNameThe name of the numeric-list. A name shall contain only alphanumeric characters and hyphens (-). DisplayString .1.3.6.1.4.1.3085.3.1.6.1.6.1.2 |
csOrionNumericListValueThe integer for this entry. This value shall always be used. Integer32 .1.3.6.1.4.1.3085.3.1.6.1.6.1.3 |
csOrionNumericListUpperLimitThe integer representing the upper boundary of a range. This attribute shall only be used when `includeRange'is specified in the csOrionNumericListMatchType attribute. Integer32 .1.3.6.1.4.1.3085.3.1.6.1.6.1.4 |
csOrionNumericListRowStatusThe RowStatus object for this table. This is used to add/delete rows from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.1.6.1.5 |
csOrionAccessListInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.1.7 |
csOrionFWInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2 |
csOrionFwConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1 |
csOrionFwGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.1 |
csOrionFwInsideIfTableThis contains the list of all the interfaces on the inside, or trusted, side of the firewall. NOTE: This table is no longer in use.deprecated SEQUENCE OF CsOrionFwInsideIfEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.1 |
csOrionFwInsideIfEntrydeprecated CsOrionFwInsideIfEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1 |
csOrionFwInsideIfIfThe identifier of the 'inside' virtual interface.deprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.1 |
csOrionFwInsideIfAddrThe Ip address of the 'inside' virtual interface.deprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.2 |
csOrionFwInsideIfMaskThe Ip Mask of the 'inside' virtual interface.rwdeprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.3 |
csOrionFwInsideIfRowStatusThe RowStatus object for this table.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.1.1.1.4 |
csOrionFwDmzIfTableThis contains the list of all the interfaces on the DmzIf side of the firewall. NOTE: This table is no longer in use.deprecated SEQUENCE OF CsOrionFwDmzIfEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.2 |
csOrionFwDmzIfEntrydeprecated CsOrionFwDmzIfEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1 |
csOrionFwDmzIfThe identifier of a 'Dmz' virtual interface.deprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.1 |
csOrionFwDmzIfAddrThe Ip address of a 'Dmz' virtual interface.deprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.2 |
csOrionFwDmzIfMaskThe Ip Mask of a 'Dmz' virtual interface.rwdeprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.3 |
csOrionFwDmzIfRowStatusThe RowStatus object for this table.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.1.2.1.4 |
csOrionFwNwGroupTableThis contains definitions of all the network groups referred to in other parts of the Firewall configuration. NOTE: This table is no longer in use.deprecated SEQUENCE OF CsOrionFwNwGroupEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.3 |
csOrionFwNwGroupEntrydeprecated CsOrionFwNwGroupEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1 |
csOrionFwNwGroupNameThe Name assigned to this Network Group.deprecated DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.1 |
csOrionFwNwGroupAddrThe Ip address of this member of this Network Group.deprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.2 |
csOrionFwNwGroupMaskThe Ip Mask assigned to this member of this Network Group.rwdeprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.3 |
csOrionFwNwGroupInterfaceThe Interface from which this member of this Network Group can be reached.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.4 |
csOrionFwNwGroupRowStatusThe RowStatus object for this table.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.1.3.1.5 |
csOrionFwEvLogTableA table for Event Logging Control for FIREWALL. SEQUENCE OF CsOrionFwEvLogEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.4 |
csOrionFwEvLogEntryEach entry contains the event logging level for the FIREWALL module on a virtual router. CsOrionFwEvLogEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.4.1 |
csOrionFwEvLogLevelThis object is used to set the level of details for event logs for FIREWALL.rw EvLogLevel .1.3.6.1.4.1.3085.3.1.6.2.1.1.4.1.1 |
csOrionFwGenCfgTableA table for Configuration Control for FIREWALL. SEQUENCE OF CsOrionFwGenCfgEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.5 |
csOrionFwGenCfgEntryEach entry contains the generic configuration for the FIREWALL module on a virtual router. CsOrionFwGenCfgEntry .1.3.6.1.4.1.3085.3.1.6.2.1.1.5.1 |
csOrionFwAccCfgFlagThis object is used to set the access configuration flag for FIREWALL.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.1.5.1.1 |
csOrionFwProxyConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2 |
csOrionFwGenProxyConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.1 |
csOrionFwGenProxyTableThis table specifies various configuration parameters for each applicable proxy. SEQUENCE OF CsOrionFwGenProxyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1 |
csOrionFwGenProxyEntryEach entry specifies a set of configuration parameters for a single proxy. CsOrionFwGenProxyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1 |
csOrionFwGenProxyIdThe proxy to which this entry applies. Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.1 |
csOrionFwGenProxyChildLimitThe maximum number of child processes that each of this proxy's daemon allows to run at a given time. If this option is set to zero, each daemon allows an unlimited number of child processes to run at any given time. Note, this is not applicable to the smtp proxy.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.2 |
csOrionFwGenProxyStatusThis is used to enable/disable a specific proxy.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.3 |
csOrionFwGenProxyActiveSessionsThis is the current number of active sessions for a specific proxy.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.1.1.4 |
csOrionFwDestTableThis table specifies destination hosts and networks permissions for each applicable proxy. NOTE: This table has been replaced by csOrionFwAccessTable.deprecated SEQUENCE OF CsOrionFwDestEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2 |
csOrionFwDestEntryEach entry specifies a single destination host or network.deprecated CsOrionFwDestEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1 |
csOrionFwDestProxyThe proxy to which this entry applies.deprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.1 |
csOrionFwDestIndexThe table index for this entry applies. This identifies the order in which the destination rules are applied.deprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.2 |
csOrionFwDestAccessThe access policy applied to the host or network identified in this entry.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.3 |
csOrionFwDestAddrThe Destination address for this entry.rwdeprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.4 |
csOrionFwDestMaskThe Destination address mask for this entry.rwdeprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.5 |
csOrionFwDestRowStatusThe RowStatus object for this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.2.1.6 |
csOrionFwHostTableThis table specifies source hosts and networks permissions for each applicable proxy. NOTE: This table has been replaces by csOrionFwAccessTable.deprecated SEQUENCE OF CsOrionFwHostEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3 |
csOrionFwHostEntryEach entry specifies a single destination host or network.deprecated CsOrionFwHostEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1 |
csOrionFwHostProxyThe proxy to which this entry applies.deprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.1 |
csOrionFwHostIndexThe table index for this entry applies. This identifies the order in which the host rules are applied.deprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.2 |
csOrionFwHostAccessThe access policy applied to the host or network identified in this entry.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.3 |
csOrionFwHostAddrThe Source address for this entry.rwdeprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.4 |
csOrionFwHostMaskThe Source address mask for this entry.rwdeprecated IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.5 |
csOrionFwHostRowStatusThe RowStatus object for this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.3.1.6 |
csOrionFwAccessTableThis table specifies the policy to apply for each new connection. A connection is identified by its source id, destination id, and protocol. SEQUENCE OF CsOrionFwAccessEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4 |
csOrionFwAccessEntryEach entry specifies a single Access Policy. CsOrionFwAccessEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1 |
csOrionFwAccessPriorityThe priority of this Access Table entry. Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.1 |
csOrionFwAccessSourceAddrThe Address of the source of a proxy connection.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.2 |
csOrionFwAccessSourceMaskThe Mask of the source of a proxy connection.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.3 |
csOrionFwAccessDestAddrThe Address of the destination of a proxy connection.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.4 |
csOrionFwAccessDestMaskThe Mask of the destination of a proxy connection.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.5 |
csOrionFwAccessActionThe action to perform on connections that match the Source Id, Destination Id, and the Protocol.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.6 |
csOrionFwAccessPortNumberThis object identifies the port number this access entry will be applied. Together with the Source Id, and the Destination Id, this is used to identify a specific connection.rw Integer32 (-1..65535) .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.7 |
csOrionFwAccessPolicyThis is the name of the policy to be applied to any connection that matches the Source Id, Destination Id, and Protocol defined in this entry. The definition of the policy itself can be found in the corresponding protocol-specific Policy Table.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.8 |
csOrionFwAccessRowStatusA row status type for this Table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.9 |
csOrionFwAccessSourceAddrListThe name of the address-list representing all source addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.10 |
csOrionFwAccessDestAddrListThe name of the address-list representing all destination addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.11 |
csOrionFwAccessDestPortListThe name of the port-list representing all destination addresses. For the proxy access entry to be operational there should be at least one entry in the csOrionAddressListTable table with its csOrionAddressListName attribute equal to the value of this attribute.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.4.1.12 |
csOrionFwProxyDaemonTableThis is a list of daemon ports along with the protocol that uses it. SEQUENCE OF CsOrionFwProxyDaemonEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5 |
csOrionFwProxyDaemonEntryEach entry specifies a daemon port and the protocol. CsOrionFwProxyDaemonEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1 |
csOrionFwProxyDaemonPortNumberThe port number of this daemon. Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.1 |
csOrionFwProxyDaemonProtocolThe protocol that uses this daemon. This is a mandatory during creation of entry.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.2 |
csOrionFwProxyDaemonRowStatusThe RowStatus object for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.5.1.3 |
csOrionFwGenProxyConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.1.6 |
csOrionFwFtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.2 |
csOrionFwFtpConfigTableThis table specifies Ftp functions that are permitted or denied. NOTE: This table has been replaced by csOrionFwFtpPolicyTable.deprecated SEQUENCE OF CsOrionFwFtpConfigEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1 |
csOrionFwFtpConfigEntryEach entry specifies a set of FTP proxy configuration parameters for a single firewall instance.deprecated CsOrionFwFtpConfigEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1 |
csOrionFwFtpLogThe ftp functions that are logged by this ftp proxy. It is a bitmap where each bit represents a function. The following is the bit assingment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), retr (18), rmd (19), rnfr (20), rnto (21), stor (22), stou (23), stru (24), type (25), user (26), xcup (27), xcwd (28), xmkd (29), xpwd (30), xrmd (31)rwdeprecated Unsigned32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1.1 |
csOrionFwFtpFunctionIdsA set of specific ftp functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), retr (18), rmd (19), rnfr (20), rnto (21), stor (22), stou (23), stru (24), type (25), user (26), xcup (27), xcwd (28), xmkd (29), xpwd (30), xrmd (31)rwdeprecated Unsigned32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.1.1.2 |
csOrionFwFtpPolicyTableThis table specifies individual Ftp Policies. The Fw Access Table identifies the specific policies to apply to specific Ftp connections. SEQUENCE OF CsOrionFwFtpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2 |
csOrionFwFtpPolicyEntryEach entry specifies a single FtpPolicy Policy. CsOrionFwFtpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1 |
csOrionFwFtpPolicyNameThe name used to identify this Ftp Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.1 |
csOrionFwFtpPolicyAuthenticateThis flag indicates if additional user authentication is required.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.2 |
csOrionFwFtpPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.3 |
csOrionFwFtpPolicyHandoffAddrThe host to which this proxy hands the proxy request.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.4 |
csOrionFwFtpPolicyLogThe ftp functions that are logged by this ftp proxy. It is a bitmap where each bit represents a function. The following is the bit assingment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), rein (18), rest (19), retr (20), rmd (21), rnfr (22), rnto (23), site (24), size (25), smnt (26), stat (27), stor (28), stou (29), stru (30), syst (31), type (32), user (33), xcup (34), xcwd (35), xmkd (36), xpwd (37), xrmd (38)rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.5 |
csOrionFwFtpPolicyFunctionIdsA set of specific ftp functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, abor (0), acct (1), allo (2), appe (3), cdup (4), cwd (5), dele (6), help (7), list (8), mkd (9), mode (10), nlst (11), noop (12), pass (13), pasv (14), port (15), pwd (16), quit (17), rein (18), rest (19), retr (20), rmd (21), rnfr (22), rnto (23), site (24), size (25), smnt (26), stat (27), stor (28), stou (29), stru (30), syst (31), type (32), user (33), xcup (34), xcwd (35), xmkd (36), xpwd (37), xrmd (38)rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.6 |
csOrionFwFtpPolicyDynamicPacketFilterWhen enabled, allows the ftp proxy to, create dynamic packet filter for data transfer (layer 2 forwarding)rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.7 |
csOrionFwFtpPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.2.1.8 |
csOrionFwFtpAuthTableThis table specifies the authentication configuration for the Ftp Proxy. SEQUENCE OF CsOrionFwFtpAuthEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3 |
csOrionFwFtpAuthEntryEach entry specifies a authentication configuration. CsOrionFwFtpAuthEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1 |
csOrionFwFtpAuthStatusThe current status of ftp authentication mode.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.1 |
csOrionFwFtpAuthServiceTypeThe service type used for authentication.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.2 |
csOrionFwFtpAuthMechanismThe machanism used for authentication.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.3 |
csOrionFwFtpAuthServersThe authentication server address used by proxy to connect to.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.4 |
csOrionFwFtpAuthNonTransparentAuthThe configuration for non-transparent mode.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.5 |
csOrionFwFtpAuthPasswdTimeoutThe password inactive timeout.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.6 |
csOrionFwFtpAuthPerUserAuthFilterThe ldap filter name on per user base.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.3.1.7 |
csOrionFwFtpConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.2.4 |
csOrionFwHttpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.3 |
csOrionFwHttpConfigTableThis table specifies a set of Http proxy configuration parameters. NOTE: This table has been replaced by csOrionFwHttpPolicyTable.deprecated SEQUENCE OF CsOrionFwHttpConfigEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1 |
csOrionFwHttpConfigEntryEach entry specifies a set of Http proxy configuration parameters for a single Http instance.deprecated CsOrionFwHttpConfigEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1 |
csOrionFwHttpLogThe http functions that are logged by the http proxy. It is a bitmap where each bit represents an http function that can be logged. The following is the bit assignment, binary (0), dir (1), exec (2), ftp (3), httpreq (4), http (5), read (6), retr (7), stor (8), text (9), type (10), write (11)rwdeprecated Unsigned32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.1 |
csOrionFwHttpOurnameThe host and domain name that the HTTP proxy uses when putting its own name into non-transparent forarded URL's.rwdeprecated DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.2 |
csOrionFwHttpFeatureIdsA set of specific http features. It is a bitmap where each bit represents an http feature supported by this proxy. The following is the bit assignment, activex (0), frames (1), java (2), script (3)rwdeprecated Unsigned32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.3 |
csOrionFwHttpFunctionIdsA set of specific http functions. It is a bitmap where each bit represents an http function supported by this proxy. The following is the bit assignment, binary (0), dir (1), exec (2), ftp (3), httpreq (4), http (5), read (6), retr (7), stor (8), text (9), type (10), write (11)rwdeprecated Unsigned32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.4 |
csOrionFwHttpHeaderIdsA set of specific http headers. It is a bitmap where each bit represents an http header supported by this proxy. The following is the bit assignment, accept-charset (0), accept-encoding (1), accept-language (2), allow (3), content-encoding (4), content-language (5), date (6), expires (7), from (8), if-modified-since (9), last-modified (10), link (11), mime-version (12), pragma (13), referer (14), retry-after (15), server (16), title (17), uri (18), user-agent (19), www-authenticate (20)rwdeprecated Unsigned32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.1.1.5 |
csOrionFwHttpPolicyTableThis table specifies individual Http Policies. The Fw Access Table identifies the specific policies to apply to specific Http connections. SEQUENCE OF CsOrionFwHttpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2 |
csOrionFwHttpPolicyEntryEach entry specifies a single HttpPolicy Policy. CsOrionFwHttpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1 |
csOrionFwHttpPolicyNameThe name used to identify this Http Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.1 |
csOrionFwHttpPolicyAuthenticateThis flag indicates if additional user authentication is required.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.2 |
csOrionFwHttpPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.3 |
csOrionFwHttpPolicyHandoffAddrThe host to which this proxy hands the proxy request.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.4 |
csOrionFwHttpPolicyOurnameThe host and domain name that the HTTP proxy uses when putting its own name into non-transparent forarded URL's.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.5 |
csOrionFwHttpPolicyLogThe Http functions that are logged by this Http proxy. It is a bitmap where each bit represents a function. By default, all functions are not logged. The following is the bit assignment, bin (0), -- binary dir (1), -- directory exec (2), -- execute ftp (3), -- ftp hreq (4), -- http request http (5), -- http read (6), -- read retr (7), -- retrieve stor (8), -- store text (9), -- text type (10), -- type wrte (11) -- writerw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.6 |
csOrionFwHttpPolicyFunctionIdsA set of specific http functions. It is a bitmap where each bit represents a specific function that will be suported by this proxy. The following is the bit assignment, bin (0), -- binary dir (1), -- directory exec (2), -- execute ftp (3), -- ftp hreq (4), -- http request http (5), -- http read (6), -- read retr (7), -- retrieve stor (8), -- store text (9), -- text type (10), -- type wrte (11) -- writerw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.7 |
csOrionFwHttpPolicyFeaturesA set of specific http features. It is a bitmap where each bit represents a specific features that will be suported by this proxy. By default, all features are allowed. The following is the bit assignment, actx (0), -- activex fram (1), -- frames htm2 (2), -- html 2 java (3), -- java kanj (4), -- kanji legk (5), -- legacy kanji mpf (6), -- multi part form scrp (7), -- java scriptrw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.8 |
csOrionFwHttpPolicyHeaderA set of specific http headers. It is a bitmap where each bit represents a specific header that will be suported by this proxy. By default, all http headers are supported. The following is the bit assignment, achr (0), -- accept charset aenc (1), -- accept encoding alng (2), -- accept language alow (3), -- allow cenc (4), -- content encoding clng (5), -- content language date (6), -- date exp (7), -- expires from (8), -- from imod (9), -- if modified since lmod (10), -- last modified lnk (11), -- link mime (12), -- mime version prgm (13), -- pragma refr (14), -- referer reta (15), -- retry after serv (16), -- server titl (17), -- title uri (18), -- uniform resource locator user (19), -- user agent www (20), -- www authenticaterw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.9 |
csOrionFwHttpPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.2.1.10 |
csOrionFwHttpPortTableThis table defines the specific ports that a particular HTTP policy will permit or deny. SEQUENCE OF CsOrionFwHttpPortEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3 |
csOrionFwHttpPortEntryEach entry specifies a single Http Policy. CsOrionFwHttpPortEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1 |
csOrionFwHttpPortPolicyNameThe policy name this port access is applied to. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.1 |
csOrionFwHttpPortNumberThe port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.2 |
csOrionFwHttpPortAccessThe access to this port number.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.3 |
csOrionFwHttpPortRowStatusThe RowStatus object for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.3.1.4 |
csOrionFwHttpAuthTableThis table specifies the authentication configuration for the Ftp Proxy. SEQUENCE OF CsOrionFwHttpAuthEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4 |
csOrionFwHttpAuthEntryEach entry specifies a authentication configuration. CsOrionFwHttpAuthEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1 |
csOrionFwHttpAuthStatusThe current status of http authentication mode.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.1 |
csOrionFwHttpAuthServiceTypeThe service type used for authentication.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.2 |
csOrionFwHttpAuthMechanismThe machanism used for authentication.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.3 |
csOrionFwHttpAuthServersThe authentication server address used by proxy to connect to.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.4 |
csOrionFwHttpAuthNonTransparentAuthThe configuration for non-transparent mode.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.5 |
csOrionFwHttpAuthPasswdTimeoutThe password inactive timeout.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.6 |
csOrionFwHttpAuthPerUserAuthFilterThe ldap filter name on per user base.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.4.1.7 |
csOrionFwHttpConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.3.5 |
csOrionFwSmtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.4 |
csOrionFwSmtpConfigTableThis table specifies a set of Smtp proxy configuration parameters. NOTE: This table has been replaced by csOrionFwSmtpPolicyTable.deprecated SEQUENCE OF CsOrionFwSmtpConfigEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1 |
csOrionFwSmtpConfigEntryEach entry specifies a set of Smtp proxy configuration parameters for a single Smtp instance.deprecated CsOrionFwSmtpConfigEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1 |
csOrionFwSmtpBadAdminThe username to which the smapd server forwards mail that it cannot deliver.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.1 |
csOrionFwSmtpBadDirThe directory in which the smapd server places any spooled mail that it cannot deliver.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.2 |
csOrionFwSmtpMaxChildrenThe maximum number of child processes the smapd server can fork to handle mail.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.3 |
csOrionFwSmtpWakeupThe number of seconds the smapd server sleeps between scans of spool directory for undelivered mail.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.4 |
csOrionFwSmtpInternalMailHubThis object identifies the Internal Mail Hub using either an IP address or a domain name.rwdeprecated DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.5 |
csOrionFwSmtpLocalDomainLocal domain that the firewall is serving -- IP address or domain name.rwdeprecated DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.6 |
csOrionFwSmtpLoggingSpecifies if normal or no logging is to be done on SMTP proxy.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.7 |
csOrionFwSmtpLogRelayLogs the rejection of mail relay attempts.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.8 |
csOrionFwSmtpLogSpamLogs the rejection of mail spam attempts.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.9 |
csOrionFwSmtpMaxBytesMaximum number of bytes of the mail content. The value 0 indicates no maximum.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.10 |
csOrionFwSmtpMaxRecipThe maximum number of recipients of the mail message. The value 0 indicates no maximum.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.11 |
csOrionFwSmtpSpamReplyThis object controls the type of response the SMTP proxy makes back to the connected SMTP server when nuisance mail is detected: 554 - Explicitly reject and notify the connected server. 250 - Acknowledge acceptance of the message but drop it at the firewall.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.12 |
csOrionFwSmtpRelayReplyThis object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected: 550 - Explicitly reject and notify the connected server. 250 - Acknowledge acceptance of the message but drop it at the firewall.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.1.1.13 |
csOrionFwSmtpPolicyTableThis table specifies individual SMTP Policies. The Fw Access Table identifies the specific policies to apply to specific SMTP connections. SEQUENCE OF CsOrionFwSmtpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2 |
csOrionFwSmtpPolicyEntryEach entry specifies a single SmtpPolicy Policy. CsOrionFwSmtpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1 |
csOrionFwSmtpPolicyNameThe name used to identify this Smtp Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.1 |
csOrionFwSmtpPolicyTimeoutThe timeout limit on idle connection in seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.2 |
csOrionFwSmtpPolicyInternalMailHubThe default internal mail hub for email to go to if the destination mail for the protected domain(see ..).rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.3 |
csOrionFwSmtpPolicyBadEmailAdminThe administrator that will receive email notification of any bad email.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.4 |
csOrionFwSmtpPolicyLocalDomainThe domain currently being protected by the firewall.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.5 |
csOrionFwSmtpPolicyMaxBytesThis is the maximum size (in bytes) of the mail body that the proxy will accept. Any data beyond the maximum size is dropped. NOTE: zero (0) means no limit restriction.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.6 |
csOrionFwSmtpPolicyMaxRecipientsThis is the maximum recipients that the proxy will allow at any given email. NOTE: zero (0) means no limit restriction.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.7 |
csOrionFwSmtpPolicyLoggingIndicates if normal or no logging is to be done.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.8 |
csOrionFwSmtpPolicyLogRelayIndicates if normal or no logging is to be done.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.9 |
csOrionFwSmtpPolicyRelayReplyThis object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.10 |
csOrionFwSmtpPolicyLogSpamIndicates if normal or no logging is to be done.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.11 |
csOrionFwSmtpPolicySpamReplyThis object controls the type of response the SMTP proxy makes back to the connected SMTP server when unauthorized mail relaying is detected.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.12 |
csOrionFwSmtpPolicyRowStatusRow status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.13 |
csOrionFwSmtpPolicyMimeCheckThis object controls whether the proxy attempts to validate the syntax of all MIME attachments within the email messagerw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.2.1.14 |
csOrionFwSmtpRelayTableThis table defines the specific email relay that a particular SMTP policy will permit or deny. SEQUENCE OF CsOrionFwSmtpRelayEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3 |
csOrionFwSmtpRelayEntryEach entry specifies a single email relay. CsOrionFwSmtpRelayEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1 |
csOrionFwSmtpRelayPolicyNameThe policy name this email relay access is applied to. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.1 |
csOrionFwSmtpRelaySourceThe source id (IP address, IP address with mask, network IP address, network IP address with mask) of the email relay. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.2 |
csOrionFwSmtpRelayAccessThe access to this email relay.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.3 |
csOrionFwSmtpRelayRowStatusThe row status object for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.3.1.4 |
csOrionFwSmtpSpamTableThis table defines the specific spam email that a particular SMTP policy will permit or deny. SEQUENCE OF CsOrionFwSmtpSpamEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4 |
csOrionFwSmtpSpamEntryEach entry specifies a single spamm email. CsOrionFwSmtpSpamEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1 |
csOrionFwSmtpSpamPolicyNameThe policy name this spam email access is applied to. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.1 |
csOrionFwSmtpSpamSourceThe source id (IP address, IP address with mask, network IP address, network IP address with mask) of the spam email. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.2 |
csOrionFwSmtpSpamAccessThe access to this spam email.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.3 |
csOrionFwSmtpSpamRowStatusThe row status object for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.4.1.4 |
csOrionFwSmtpConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.4.5 |
csOrionFwTelnetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.5 |
csOrionFwTelnetPolicyTableThis table specifies individual Telnet Policies. The Fw Access Table identifies the specific policies to apply to specific Telnet connections. SEQUENCE OF CsOrionFwTelnetPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1 |
csOrionFwTelnetPolicyEntryEach entry specifies a single Telnet Policy. CsOrionFwTelnetPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1 |
csOrionFwTelnetPolicyNameThe name used to identify this Telnet Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.1 |
csOrionFwTelnetPolicyAuthenticateThis flag indicates if additional user authentication is required.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.2 |
csOrionFwTelnetPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.3 |
csOrionFwTelnetPolicyPasswordChangeThis object indicates whether the user is allowed to change the password.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.4 |
csOrionFwTelnetPolicyPromptThe command line promt the proxy should use for telnet sessions.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.5 |
csOrionFwTelnetPolicyXGatewayThis object indicates whether or not the client is allowed to use X proxy.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.6 |
csOrionFwTelnetPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.1.1.7 |
csOrionFwTelnetAuthTableThis table specifies the authentication configuration for the Ftp Proxy. SEQUENCE OF CsOrionFwTelnetAuthEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2 |
csOrionFwTelnetAuthEntryEach entry specifies a authentication configuration. CsOrionFwTelnetAuthEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1 |
csOrionFwTelnetAuthStatusThe current status of telnet authentication mode.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.1 |
csOrionFwTelnetAuthServiceTypeThe service type used for authentication.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.2 |
csOrionFwTelnetAuthMechanismThe machanism used for authentication.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.3 |
csOrionFwTelnetAuthServersThe authentication server address used by proxy to connect to.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.4 |
csOrionFwTelnetAuthNonTransparentAuthThe configuration for non-transparent mode.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.5 |
csOrionFwTelnetAuthPasswdTimeoutThe password inactive timeout.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.6 |
csOrionFwTelnetAuthPerUserAuthFilterThe ldap filter name on per user base.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.2.1.7 |
csOrionFwTelnetConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.5.3 |
csOrionFwPop3Config OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.6 |
csOrionFwPop3PolicyTableThis table specifies individual POP3 Policies. The Fw Access Table identifies the specific policies to apply to specific POP3 connections. SEQUENCE OF CsOrionFwPop3PolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1 |
csOrionFwPop3PolicyEntryEach entry specifies a single POP3 Policy. CsOrionFwPop3PolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1 |
csOrionFwPop3PolicyNameThe name used to identify this POP3 Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.1 |
csOrionFwPop3PolicyAuthenticateThis flag indicates if additional user authentication is required.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.2 |
csOrionFwPop3PolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.3 |
csOrionFwPop3PolicyPopServerThe default internal POP server for email.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.4 |
csOrionFwPop3PolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.1.1.7 |
csOrionFwPop3ConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.6.2 |
csOrionFwPlugConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.7 |
csOrionFwPlugPolicyTableThis table specifies individual PLUG Policies. The Fw Access Table identifies the specific policies to apply to specific PLUG connections. SEQUENCE OF CsOrionFwPlugPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1 |
csOrionFwPlugPolicyEntryEach entry specifies a single PLUG Policy. CsOrionFwPlugPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1 |
csOrionFwPlugPolicyNameThe name used to identify this PLUG Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.1 |
csOrionFwPlugPolicyAuthenticateThis flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.2 |
csOrionFwPlugPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.3 |
csOrionFwPlugPolicyRemoteServerThe remote server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.4 |
csOrionFwPlugPolicyRemotePortThe remote server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.5 |
csOrionFwPlugPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.1.1.6 |
csOrionFwPlugConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.7.2 |
csOrionFwNntpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.8 |
csOrionFwNntpPolicyTableThis table specifies individual NNTP Policies. The Fw Access Table identifies the specific policies to apply to specific NNTP connections. SEQUENCE OF CsOrionFwNntpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1 |
csOrionFwNntpPolicyEntryEach entry specifies a single NNTP Policy. CsOrionFwNntpPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1 |
csOrionFwNntpPolicyNameThe name used to identify this NNTP Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.1 |
csOrionFwNntpPolicyAuthenticateThis flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.2 |
csOrionFwNntpPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.3 |
csOrionFwNntpPolicyRemoteServerThe internal NEWS server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.4 |
csOrionFwNntpPolicyRemotePortThe internal NEWS server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.5 |
csOrionFwNntpPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.1.1.6 |
csOrionFwNntpConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.8.2 |
csOrionFwLdapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.9 |
csOrionFwLdapPolicyTableThis table specifies individual LDAP Policies. The Fw Access Table identifies the specific policies to apply to specific LDAP connections. SEQUENCE OF CsOrionFwLdapPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1 |
csOrionFwLdapPolicyEntryEach entry specifies a single LDAP Policy. CsOrionFwLdapPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1 |
csOrionFwLdapPolicyNameThe name used to identify this LDAP Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.1 |
csOrionFwLdapPolicyAuthenticateThis flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.2 |
csOrionFwLdapPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.3 |
csOrionFwLdapPolicyRemoteServerThe internal LDAP server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.4 |
csOrionFwLdapPolicyRemotePortThe internal LDAP server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.5 |
csOrionFwLdapPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.1.1.6 |
csOrionFwLdapConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.9.2 |
csOrionFwLnotesConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.10 |
csOrionFwLnotesPolicyTableThis table specifies individual LNOTES Policies. The Fw Access Table identifies the specific policies to apply to specific LNOTES connections. SEQUENCE OF CsOrionFwLnotesPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1 |
csOrionFwLnotesPolicyEntryEach entry specifies a single LNOTES Policy. CsOrionFwLnotesPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1 |
csOrionFwLnotesPolicyNameThe name used to identify this LNOTES Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.1 |
csOrionFwLnotesPolicyAuthenticateThis flag indicates if additional user authentication is required. NOTE: Authenticate attribute is not applicable to this kind of application.rwdeprecated Enumeration .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.2 |
csOrionFwLnotesPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.3 |
csOrionFwLnotesPolicyRemoteServerThe internal Lotus Notes server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.4 |
csOrionFwLnotesPolicyRemotePortThe internal Lotus Notes server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.5 |
csOrionFwLnotesPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.1.1.6 |
csOrionFwLnotesConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.10.2 |
csOrionFwAolConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.11 |
csOrionFwAolPolicyTableThis table specifies individual AOL Policies. The Fw Access Table identifies the specific policies to apply to specific AOL connections. SEQUENCE OF CsOrionFwAolPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1 |
csOrionFwAolPolicyEntryEach entry specifies a single AOL Policy. CsOrionFwAolPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1 |
csOrionFwAolPolicyNameThe name used to identify this AOL Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.1 |
csOrionFwAolPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.2 |
csOrionFwAolPolicyRemoteServerThe internal AOL server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.3 |
csOrionFwAolPolicyRemotePortThe internal AOL server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.4 |
csOrionFwAolPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.1.1.5 |
csOrionFwAolConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.11.2 |
csOrionFwCompuServeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.12 |
csOrionFwCompuServePolicyTableThis table specifies individual CompuServe Policies. The Fw Access Table identifies the specific policies to apply to specific CompuServe connections. SEQUENCE OF CsOrionFwCompuServePolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1 |
csOrionFwCompuServePolicyEntryEach entry specifies a single CompuServe Policy. CsOrionFwCompuServePolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1 |
csOrionFwCompuServePolicyNameThe name used to identify this CompuServe Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.1 |
csOrionFwCompuServePolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.2 |
csOrionFwCompuServePolicyRemoteServerThe internal CompuServe server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.3 |
csOrionFwCompuServePolicyRemotePortThe internal CompuServe server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.4 |
csOrionFwCompuServePolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.1.1.5 |
csOrionFwCompuServeConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.12.2 |
csOrionFwNetMeetingConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.13 |
csOrionFwNetMeetingPolicyTableThis table specifies individual NetMeeting Policies. The Fw Access Table identifies the specific policies to apply to specific NetMeeting connections. SEQUENCE OF CsOrionFwNetMeetingPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1 |
csOrionFwNetMeetingPolicyEntryEach entry specifies a single NetMeeting Policy. CsOrionFwNetMeetingPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1 |
csOrionFwNetMeetingPolicyNameThe name used to identify this NetMeeting Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.1 |
csOrionFwNetMeetingPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.2 |
csOrionFwNetMeetingPolicyRemoteServerThe internal NetMeeting server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.3 |
csOrionFwNetMeetingPolicyRemotePortThe internal NetMeeting server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.4 |
csOrionFwNetMeetingPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.1.1.5 |
csOrionFwNetMeetingConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.13.2 |
csOrionFwMsSqlConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.14 |
csOrionFwMsSqlPolicyTableThis table specifies individual Microsoft SQL/Sybase Policies. The Fw Access Table identifies the specific policies to apply to specific Microsoft SQL/Sybase connections. SEQUENCE OF CsOrionFwMsSqlPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1 |
csOrionFwMsSqlPolicyEntryEach entry specifies a single Microsoft SQL/Sybase Policy. CsOrionFwMsSqlPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1 |
csOrionFwMsSqlPolicyNameThe name used to identify this Microsoft SQL/Sybase Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.1 |
csOrionFwMsSqlPolicyTimeoutThe number of seconds the proxy is idle before disconnecting.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.2 |
csOrionFwMsSqlPolicyRemoteServerThe internal Microsoft SQL or Sybase server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.3 |
csOrionFwMsSqlPolicyRemotePortThe internal Microsoft SQL or Sybase server's port number.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.4 |
csOrionFwMsSqlPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.1.1.5 |
csOrionFwMsSqlConfigEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.14.2 |
csOrionFwRshConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.2.1.2.15 |
csOrionFwRshPolicyTableThis table specifies individual Remote Shell (RSH) Policies. The Fw Access Table identifies the specific policies to apply to specific RSH connections. SEQUENCE OF CsOrionFwRshPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1 |
csOrionFwRshPolicyEntryEach entry specifies a single RSH Policy. CsOrionFwRshPolicyEntry .1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1 |
csOrionFwRshPolicyNameThe name used to identify this RSH Policy entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.1 |
csOrionFwRshPolicyTimeoutThe number of seconds the proxy is idle before disconnecting. For RSH proxy, the idle timer is triggered if no activities are detected on BOTH control and error connections.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.2 |
csOrionFwRshPolicyRemoteServerThe internal RSH server.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.3 |
csOrionFwRshPolicyRowStatusThe Row Status object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.2.1.2.15.1.1.4 |
csOrionFWInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.2.2 |
csOrionPktFilterInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.3 |
csOrionVrPktFilterTableThis table specifies a set of filters to be applied to packets received over each the interfaces over this virtual router. Filters can be configured either to permit a packet, deny a packet, or send the packet to a firewall proxy. SEQUENCE OF CsOrionVrPktFilterEntry .1.3.6.1.4.1.3085.3.1.6.3.1 |
csOrionVrPktFilterEntryEach filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route. CsOrionVrPktFilterEntry .1.3.6.1.4.1.3085.3.1.6.3.1.1 |
csOrionVrPktFilterIndexThe Index of this particular Packet Filter. Integer32 .1.3.6.1.4.1.3085.3.1.6.3.1.1.1 |
csOrionVrPktFilterAclIdThe Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on any of the virtual interfaces on this virtual router that satisfy that access list entry are acted upon by this filter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.3.1.1.2 |
csOrionVrPktFilterActionThe action performed by this filter.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.1.1.3 |
csOrionVrPktFilterDirectionThe direction of packets on which this filter is applied.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.1.1.4 |
csOrionVrPktFilterRowStatusA row status type for this Table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.3.1.1.5 |
csOrionVrPktFilterTcpStatusThe state of the TCP.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.1.1.6 |
csOrionVrPktFilterHitCounterWhen csOrionVrPktFilterHitCounter is enabled, the counter be incremented everytime a packet that corresponds to the packet filter is received.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.3.1.1.7 |
csOrionVrPktFilterCounterStatusThe status of csOrionVrPktFilterHitCounter. Will also be enabled as a result of enabling csOrionVrPktFilterEvlogStatus.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.1.1.8 |
csOrionVrPktFilterEvlogStatusIf enabled, event logs will be sent when a packet hits this packet filter. Will also result to csOrionVrPktFilterCounterStatus enabled.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.1.1.9 |
csOrionViPktFilterTableThis table specifies a set of filters to be applied to packets received over this virtual interface. Filters can be configured either to permit a packet, deny a packet, or send the packet to a firewall proxy. SEQUENCE OF CsOrionViPktFilterEntry .1.3.6.1.4.1.3085.3.1.6.3.2 |
csOrionViPktFilterEntryEach filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route. CsOrionViPktFilterEntry .1.3.6.1.4.1.3085.3.1.6.3.2.1 |
csOrionViPktFilterIndexThe Index of this particular Packet Filter. Integer32 .1.3.6.1.4.1.3085.3.1.6.3.2.1.1 |
csOrionViPktFilterAclIdThe Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on this virtual interface that access list entry are acted upon by this filter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.3.2.1.2 |
csOrionViPktFilterActionThe action performed by this filter.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.2.1.3 |
csOrionViPktFilterDirectionThe direction of packets on which this filter is applied.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.2.1.4 |
csOrionViPktFilterRowStatusA row status type for this Table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.3.2.1.5 |
csOrionViPktFilterTcpStatusThe state of the TCP.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.2.1.6 |
csOrionViPktFilterHitCounterWhen csOrionViPktFilterHitCounter is enabled, the counter be incremented everytime a packet that corresponds to the packet filter is received.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.3.2.1.7 |
csOrionViPktFilterCounterStatusThe status of csOrionViPktFilterHitCounter. Will also be enabled as a result of enabling csOrionViPktFilterEvlogStatus.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.2.1.8 |
csOrionViPktFilterEvlogStatusIf enabled, event logs will be sent when a packet hits this packet filter. Will also result to csOrionViPktFilterCounterStatus reset and enabled.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.3.2.1.9 |
csOrionPktFilterInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.3.3 |
csOrionNatInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.4 |
csOrionNatPoolTableA list of Access List Entries. SEQUENCE OF CsOrionNatPoolEntry .1.3.6.1.4.1.3085.3.1.6.4.1 |
csOrionNatPoolEntryAn entry containing filtering information used to classify packets. CsOrionNatPoolEntry .1.3.6.1.4.1.3085.3.1.6.4.1.1 |
csOrionNatPoolIdAn identifier for this Nat Pool Entry. Integer32 .1.3.6.1.4.1.3085.3.1.6.4.1.1.1 |
csOrionNatPoolStartAddressrw IpAddress .1.3.6.1.4.1.3085.3.1.6.4.1.1.2 |
csOrionNatPoolEndAddressrw IpAddress .1.3.6.1.4.1.3085.3.1.6.4.1.1.3 |
csOrionNatPoolStartPortrw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.6.4.1.1.4 |
csOrionNatPoolEndPortrw Integer32 (-1..2147483647) .1.3.6.1.4.1.3085.3.1.6.4.1.1.5 |
csOrionNatPoolStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.4.1.1.6 |
csOrionNatTranslationTableThis contains the NAT translation entries. SEQUENCE OF CsOrionNatTranslationEntry .1.3.6.1.4.1.3085.3.1.6.4.2 |
csOrionNatTranslationEntryAn entry containing IP address, port and the protocol information corresponding to a session. CsOrionNatTranslationEntry .1.3.6.1.4.1.3085.3.1.6.4.2.1 |
csOrionNatInsideLocalAddr IpAddress .1.3.6.1.4.1.3085.3.1.6.4.2.1.1 |
csOrionNatInsideLocalPort Integer32 .1.3.6.1.4.1.3085.3.1.6.4.2.1.2 |
csOrionNatOutsideGlobalAddr IpAddress .1.3.6.1.4.1.3085.3.1.6.4.2.1.3 |
csOrionNatOutsideGlobalPort Integer32 .1.3.6.1.4.1.3085.3.1.6.4.2.1.4 |
csOrionNatProtocol Integer32 .1.3.6.1.4.1.3085.3.1.6.4.2.1.5 |
csOrionNatInsideGlobalAddrro IpAddress .1.3.6.1.4.1.3085.3.1.6.4.2.1.6 |
csOrionNatInsideGlobalPortro Integer32 .1.3.6.1.4.1.3085.3.1.6.4.2.1.7 |
csOrionNatStaticTranslationTable SEQUENCE OF CsOrionNatStaticTranslationEntry .1.3.6.1.4.1.3085.3.1.6.4.3 |
csOrionNatStaticTranslationEntry CsOrionNatStaticTranslationEntry .1.3.6.1.4.1.3085.3.1.6.4.3.1 |
csOrionNatStaticInsideLocalAddressAn identifier for this Nat Pool Entry. The address as known in the private network. IpAddress .1.3.6.1.4.1.3085.3.1.6.4.3.1.1 |
csOrionNatStaticInsideGlobalAddressThe address as know in the outside world.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.4.3.1.2 |
csOrionNatStaticTranslationStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.4.3.1.3 |
csOrionNatStaticNetmaskThe network mask. For one-to-one static NAT translation, mask should be zero.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.4.3.1.4 |
csOrionNatStaticTranslationTypeSource address translation will be for outgoing packets and destination address translation will be for incoming packets.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.4.3.1.5 |
csOrionNatStaticVITranslationTable SEQUENCE OF CsOrionNatStaticVITranslationEntry .1.3.6.1.4.1.3085.3.1.6.4.4 |
csOrionNatStaticVITranslationEntry CsOrionNatStaticVITranslationEntry .1.3.6.1.4.1.3085.3.1.6.4.4.1 |
csOrionNatStaticIfIndexThe VI where to apply the static NAT translation. Integer32 .1.3.6.1.4.1.3085.3.1.6.4.4.1.1 |
csOrionNatStaticVIInsideLocalAddressAn identifier for this Nat Pool Entry. The address as known in the private network. IpAddress .1.3.6.1.4.1.3085.3.1.6.4.4.1.2 |
csOrionNatStaticVIInsideGlobalAddressThe address as know in the outside world.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.4.4.1.3 |
csOrionNatStaticVINetmaskThe network mask. For one-to-one static NAT translation, mask should be zero.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.4.4.1.4 |
csOrionNatStaticVITranslationTypeSource address translation will be for outgoing packets and destination address translation will be for incoming packets.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.4.4.1.5 |
csOrionNatStaticVITranslationStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.4.4.1.6 |
csOrionNatInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.4.5 |
csOrionNatGeneralParamTableTable for common NAT attributes. SEQUENCE OF CsOrionNatGeneralParamEntry .1.3.6.1.4.1.3085.3.1.6.4.6 |
csOrionNatGeneralParamEntryThis table contains the NAT generic configuration parameters CsOrionNatGeneralParamEntry .1.3.6.1.4.1.3085.3.1.6.4.6.1 |
csOrionNatGenTimeoutThe NAT translation entry global timeout. The global timeout setting will be used by protocols that don't have their own inactivity timeout configurable. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.4.6.1.1 |
csOrionNatTcpTimeoutThe inactivity timeout for entries from TCP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.4.6.1.2 |
csOrionNatUdpTimeoutThe inactivity timeout for entries from UDP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.4.6.1.3 |
csOrionNatIcmpTimeoutThe inactivity timeout for entries from ICMP traffic in the translation table. Default value is 15 minutes. Minimum is 5 minutes. Maximum is 1 year.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.4.6.1.4 |
csOrionNatClearTransSetting this flag to clear will cause all entries in the translation table to be removed.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.4.6.1.5 |
csOrionNatGeneralParamTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.4.7 |
csOrionEncryptInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.5 |
csOrionIpSecTransformTableA table for IPSEC transforms. SEQUENCE OF CsOrionIpSecTransformEntry .1.3.6.1.4.1.3085.3.1.6.5.1 |
csOrionIpSecTransformEntryEach entry contains a specific set of IPSEC Transforms for use by a Security Association. CsOrionIpSecTransformEntry .1.3.6.1.4.1.3085.3.1.6.5.1.1 |
csOrionIpSecTransformNameAn index for the IpSec Transform Set table. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.1.1.1 |
csOrionIpSecTransform1The first Transform in the IpSec Transform Set table.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.1.1.2 |
csOrionIpSecTransform2The second Transform in the IpSec Transform Set table. If no transform is specified, this object will have a zero length string.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.1.1.3 |
csOrionIpSecTransform3The third Transform in the IpSec Transform Set table. If no transform is specified, this object will have a zero length string.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.1.1.4 |
csOrionIpSecTransformInitVectorThe size of the Initial Vector used by the IPSEC Transform Set.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.1.1.5 |
csOrionIpSecTransformModeThe ipsec mode used by this IPSEC Transform Set.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.1.1.6 |
csOrionIpSecTransformStatusA row status type for the IpSec Transform Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.1.1.7 |
csOrionDynamicCryptoMapTableA table for Dynamic Crypto Map. SEQUENCE OF CsOrionDynamicCryptoMapEntry .1.3.6.1.4.1.3085.3.1.6.5.2 |
csOrionDynamicCryptoMapEntryEach entry contains a specific set of Dynamic Crypto Map for use by a Security Association. CsOrionDynamicCryptoMapEntry .1.3.6.1.4.1.3085.3.1.6.5.2.1 |
csOrionDynamicCryptoMapNameAn index for the Dynamic Crypto Map Table. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.2.1.1 |
csOrionDynamicCryptoMapNumberAn index for the Dynamic Crypto Map Table. Integer32 .1.3.6.1.4.1.3085.3.1.6.5.2.1.2 |
csOrionDynamicCryptoMapMatchAddressAccess List ID used by this Dynamic Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.2.1.3 |
csOrionDynamicCryptoMapPeerPeer Address for this Dynamic Crypto Map.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.5.2.1.4 |
csOrionDynamicCryptoMapTransformSet1A transform set used by this Dynamic Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.2.1.5 |
csOrionDynamicCryptoMapTransformSet2A transform set used by this Dynamic Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.2.1.6 |
csOrionDynamicCryptoMapTransformSet3A transform set used by this Dynamic Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.2.1.7 |
csOrionDynamicCryptoMapTransformSet4A transform set used by this Dynamic Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.2.1.8 |
csOrionDynamicCryptoMapTransformSet5A transform set used by this Dynamic Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.2.1.9 |
csOrionDynamicCryptoMapTransformSet6A transform set used by this Dynamic Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.2.1.10 |
csOrionDynamicCryptoMapSessionKeyLifetimeSecA Session key lifetime in seconds used by this Dynamic Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.2.1.11 |
csOrionDynamicCryptoMapSessionKeyLifetimeBytesA Session key lifetime in bytes used by this Dynamic Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.2.1.12 |
csOrionDynamicCryptoMapPfsThis object is used to request Perfect Forward Secrecy for this Dynamic Crypto Map.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.2.1.13 |
csOrionDynamicCryptoMapStatusA row status type for the Dynamic Crypto Map.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.2.1.14 |
csOrionManualCryptoMapTableA table for Manual Crypto Map. SEQUENCE OF CsOrionManualCryptoMapEntry .1.3.6.1.4.1.3085.3.1.6.5.3 |
csOrionManualCryptoMapEntryEach entry contains a specific set of Manual Crypto Map for use by a Security Association. CsOrionManualCryptoMapEntry .1.3.6.1.4.1.3085.3.1.6.5.3.1 |
csOrionManualCryptoMapNameAn index for the Manual Crypto Map Table. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.3.1.1 |
csOrionManualCryptoMapNumberAn index for the Manual Crypto Map Table. Integer32 .1.3.6.1.4.1.3085.3.1.6.5.3.1.2 |
csOrionManualCryptoMapMatchAddressAccess List ID used by this Manual Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.3.1.3 |
csOrionManualCryptoMapTransformSetA transform set used by this Manual Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.3.1.5 |
csOrionManualCryptoMapInboundAHKeyAn inbound AH key used by this Manual Crypto Map.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.3.1.6 |
csOrionManualCryptoMapInboundAHSPIAn inbound AH SPI used by this Manual Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.3.1.7 |
csOrionManualCryptoMapOutboundAHKeyAn outbound AH key used by this Manual Crypto Map.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.3.1.8 |
csOrionManualCryptoMapOutboundAHSPIAn outbound AH SPI used by this Manual Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.3.1.9 |
csOrionManualCryptoMapInboundESPKeyAn inbound ESP key used by this Manual Crypto Map.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.3.1.10 |
csOrionManualCryptoMapInboundESPSPIAn inbound ESP SPI used by this Manual Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.3.1.11 |
csOrionManualCryptoMapInboundESPAuthKeyAn inbound ESP authentication key used by this Manual Crypto Map.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.3.1.12 |
csOrionManualCryptoMapOutboundESPKeyAn outbound ESP key used by this Manual Crypto Map.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.3.1.13 |
csOrionManualCryptoMapOutboundESPSPIAn outbound ESP SPI used by this Manual Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.3.1.14 |
csOrionManualCryptoMapOutboundESPAuthKeyAn outbound ESP authentication key used by this Manual Crypto Map.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.3.1.15 |
csOrionManualCryptoMapStatusA row status type for the Manual Crypto Map.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.3.1.16 |
csOrionIKECryptoMapTableA table for IKE Crypto Map. SEQUENCE OF CsOrionIKECryptoMapEntry .1.3.6.1.4.1.3085.3.1.6.5.4 |
csOrionIKECryptoMapEntryEach entry contains a specific set of IKE Crypto Map for use by a Security Association. CsOrionIKECryptoMapEntry .1.3.6.1.4.1.3085.3.1.6.5.4.1 |
csOrionIKECryptoMapNameAn index for the IKE Crypto Map Table. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.1 |
csOrionIKECryptoMapNumberAn index for the IKE Crypto Map Table. Integer32 .1.3.6.1.4.1.3085.3.1.6.5.4.1.2 |
csOrionIKECryptoMapFlagEach bit within this object enables a specific feature within the Crypto Map. Below is a list of the features and their corresponding bits identifiers. feature bit ------------------------------------------------------ pfs 0 pfs-identify 1 sa-per-net 5 -- note, sa-per-host & sa-per-net sa-per-host 6 -- are mutually exclusive sa-per-protocol 7 sa-per-port 8 main-mode 10 -- main-mode and aggressive-mode aggressive-mode 11 -- are mutually exclusive copy-df 21 dont-verify-padding 22 always-plain 29 passby 30 deny 31 end of description. NOTE: default value varies depending on csOrionIKECryptoMapType. 'isakmp' - default is 1056 (0x420 main-mode and sa-per-net) 'isakmpDialup' - default is 1088 (0x440 main-mode and sa-per-host).rw Unsigned32 .1.3.6.1.4.1.3085.3.1.6.5.4.1.3 |
csOrionIKECryptoMapMatchAddressAccess List ID used by this IKE Crypto Map.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.4.1.4 |
csOrionIKECryptoMapPfsGroupIf one of the pfs features is enabled in csOrionIKECryptoMapFlags, this object is used to identify the Diffie-Helman group used for this IKE Crypto Map.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.5 |
csOrionIKECryptoMapKeyrw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.4.1.6 |
csOrionIKECryptoMapTransformSet1A transform set used by this IKE Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.7 |
csOrionIKECryptoMapTransformSet2A transform set used by this IKE Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.8 |
csOrionIKECryptoMapTransformSet3A transform set used by this IKE Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.9 |
csOrionIKECryptoMapTransformSet4A transform set used by this IKE Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.10 |
csOrionIKECryptoMapTransformSet5A transform set used by this IKE Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.11 |
csOrionIKECryptoMapTransformSet6A transform set used by this IKE Crypto Map.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.12 |
csOrionIKECryptoMapPolicyThe IKE Policy used by this Crypto Map. This references an entry in csOrionIKEPolicyTable.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.13 |
csOrionIKECryptoMapLocalIdentityThe Local IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format).rw LongDisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.14 |
csOrionIKECryptoMapSaLifetimeSoftSecThe soft rekey interval lifetime in seconds used by this IKE Crypto Map Entry. This defines the period of time that elapses between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKECryptoMapSaLifetimeHardSec and is really not negotiated.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.5.4.1.15 |
csOrionIKECryptoMapSaLifetimeSoftKbytesThe soft rekey interval lifetime in kilobytes used by this IKE Crypto Map Entry. This defines the maximum amount of data transferred between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKECryptoMapSaLifetimeHardKbytes and is really not negotiated.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.4.1.16 |
csOrionIKECryptoMapSaLifetimeHardSecThe number of seconds that elapse before the SA is completely deleted. If this occurs on an active connection, a new ISAKMP negotiation starting at phase I takes place and a new SA is initiated. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.rw Integer32 (0 | 60..2147483647) .1.3.6.1.4.1.3085.3.1.6.5.4.1.17 |
csOrionIKECryptoMapSaLifetimeHardKbytesThe number of kilobytes transferred before the SA is completely deleted. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.rw Integer32 (0 | 256..2147483647) .1.3.6.1.4.1.3085.3.1.6.5.4.1.18 |
csOrionIKECryptoMapStatusA row status type for the IKE Crypto Map.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.4.1.19 |
csOrionIKECryptoMapTypeThis object indicates if this IKE Crytomap is used as a regular crytomap or for dial-up. Its value is only set during creation. Therefore, it must not be modified once created.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.20 |
csOrionIKECryptoMapIdleTimeoutThe idle timeout in seconds of the dialup connection. This will be used only when the csOrionIKECryptoMapType is 'isakmpDialup' otherwise its value is zero. Setting this object to 0 will turn the timer off. The minimum valid timeout value for a dialup connection is 60, i.e., 1 minute.rw Integer32 (0 | 60..2147483647) UNITS "seconds" .1.3.6.1.4.1.3085.3.1.6.5.4.1.21 |
csOrionIKECryptoMapLocalIdentityTypeThe Local IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapLocalIdentity.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.22 |
csOrionIKECryptoMapRemoteIdentity1The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType1.rw LongDisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.23 |
csOrionIKECryptoMapRemoteIdentity2The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType2.rw LongDisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.24 |
csOrionIKECryptoMapRemoteIdentity3The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType3.rw LongDisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.25 |
csOrionIKECryptoMapRemoteIdentity4The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType4.rw LongDisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.26 |
csOrionIKECryptoMapRemoteIdentity5The remote IKE Identity for this Crypto Map entry. This can be either a hostname or an IP address (in dotted decimal format). In the case of IP address, the format is 'a.b.c.d/w.x.y.z', where a.b.c.d is the ip address and w.x.y.z is the address mask. If address mask is not specified, it is assumed to be 255.255.255.255. This is used by IKE to differentiate the remote end so as to determine which crypto map with the unique map priority is to be used. This has to be set together with csOrionIKECryptoMapRemoteIdentityType5.rw LongDisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.27 |
csOrionIKECryptoMapRemoteIdentityType1The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity1.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.28 |
csOrionIKECryptoMapRemoteIdentityType2The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity2.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.29 |
csOrionIKECryptoMapRemoteIdentityType3The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity3.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.30 |
csOrionIKECryptoMapRemoteIdentityType4The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity4.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.31 |
csOrionIKECryptoMapRemoteIdentityType5The remote IKE Identity type for this Crypto Map entry. This has to be set together with csOrionIKECryptoMapRemoteIdentity5.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.4.1.32 |
csOrionIKECryptoMapAddressPoolThis specifies whether IP address assignment is necessary for the remote dialup host and, if it is, how to obtain the address assignment. The following string values can be set: 'NONE' - means IP address assignment is not required for the remote dialup host 'AAA' - means the IP address is to be requested from an authentication or authorization server for the remote private IP address assignment - use the IP address in this address pool for the remote private IP address assignment; this name corresponds to csOrionIpLocalAddrPoolName, so the corresponding entry in csOrionIpLocalAddrPoolTable must have already existed. Applicable to ipsec-dialup crypto map only.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.4.1.33 |
csOrionIKECryptoMapDynamicRouteAddIf this object is set to true, IKE will dynamically load a static route when an SA is loaded. This static route will be used to route outgoing data packets to the tunnel VI for encryption to be sent to the remote ISDN network branches. IKE will also delete the route when the ISDN network SA pair is deleted. Note: This is implemented specifically for an ISDN network dialup. For the isakmp site-to-site tunnel, regular dialup tunnel and DSL dialup tunnel configurations, static routes for routing data packets to tunnel VI must be created manually instead of using this dynamic route addition capability, since this will degrade the IKE performance significantly, especially for regular and DSL dialup cases.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.4.1.34 |
csOrionIKEPolicyTableA table for IKE Crypto Map. SEQUENCE OF CsOrionIKEPolicyEntry .1.3.6.1.4.1.3085.3.1.6.5.5 |
csOrionIKEPolicyEntryEach entry contains a specific set of IKE Crypto Map for use by a Security Association. CsOrionIKEPolicyEntry .1.3.6.1.4.1.3085.3.1.6.5.5.1 |
csOrionIKEPolicyNameThe name assigned to this set of IKE Policies. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.5.1.1 |
csOrionIKEPolicyPriorityThe priority assigned to this IKE Policy Entry. Integer32 .1.3.6.1.4.1.3085.3.1.6.5.5.1.2 |
csOrionIKEPolicyHashThe Hash algorithm employed by this IKE Policy Entry.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.5.1.3 |
csOrionIKEPolicyEncryptionThe Encryption algorithm employed by this IKE Policy Entry.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.5.1.4 |
csOrionIKEPolicySaLifetimeSoftSecThe soft rekey interval lifetime in seconds used by this IKE Crypto Map Entry. This defines the period of time that elapses between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKEPolicySaLifetimeHardSec and is really not negotiated.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.5.5.1.5 |
csOrionIKEPolicySaLifetimeSoftKbytesThe soft rekey interval lifetime in kilobytes used by this IKE Crypto Map Entry. This defines the maximum amount of data transferred between ISAKMP phase II rekeys. This object is deprecated because its value is derived from csOrionIKEPolicySaLifetimeHardKbytes and is really not negotiated.rwdeprecated Integer32 .1.3.6.1.4.1.3085.3.1.6.5.5.1.6 |
csOrionIKEPolicySaLifetimeHardSecThe number of seconds that elapse before the SA is completely deleted. If this occurs on an active connection, a new ISAKMP negotiation starting at phase I takes place and a new SA is initiated. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.rw Integer32 (0 | 60..2147483647) .1.3.6.1.4.1.3085.3.1.6.5.5.1.7 |
csOrionIKEPolicySaLifetimeHardKbytesThe number of kilobytes transferred before the SA is completely deleted. 0 is a special value and indicates that this particular Lifetime parameter is not to be conveyed to the remote side in any proposal that might be sent.rw Integer32 (0 | 256..2147483647) .1.3.6.1.4.1.3085.3.1.6.5.5.1.8 |
csOrionIKEPolicyAuthenticationThe Authentication algorithm employed by this Policy entry.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.5.1.9 |
csOrionIKEPolicyPfsGroupIf one of the pfs features is enabled in csOrionIKECryptoMapFlags, this object is used to identify the Diffie-Helman group used for this IKE Crypto Map.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.5.1.10 |
csOrionIKEPolicyStatusA row status type for the IKE Policy Entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.5.1.11 |
csOrionIKEPolicyAuthorizationTypeFlagEach bit within this object specifies the type of authorization to be enabled for IKE phase 1. options bit ------------------------------------------------------ certificate-presence 0 user-exists 1 enterprise-ID 2rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.5.1.12 |
csOrionIKECertTableA table of Certificates. SEQUENCE OF CsOrionIKECertEntry .1.3.6.1.4.1.3085.3.1.6.5.6 |
csOrionIKECertEntryEach entry contains a specific certificate. CsOrionIKECertEntry .1.3.6.1.4.1.3085.3.1.6.5.6.1 |
csOrionIKECertNameThe name assigned to this set of IKE Certificates. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.6.1.1 |
csOrionIKECertMapNameThe IKE Crypto Map referred to by this Cert entry. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.6.1.2 |
csOrionIKECertFlagEach bit within this object enables a specific feature within the Cert Table. Below is a list of the features and their corresponding bits identifiers. feature bit ------------------------------------------------------ no-crl 0 (more descriptions will follow).rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.6.1.3 |
csOrionIKECertCertificaterw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.6.1.4 |
csOrionIKECertPrivateKeyrw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.5.6.1.5 |
csOrionIKECertStatusA row status type for the IKE Cert Entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.6.1.6 |
csOrionIKESvrParamTableA table of IKE Server Parameters in every VR. SEQUENCE OF CsOrionIKESvrParamEntry .1.3.6.1.4.1.3085.3.1.6.5.7 |
csOrionIKESvrParamEntryEach entry contains parameter settings of an IKE server. CsOrionIKESvrParamEntry .1.3.6.1.4.1.3085.3.1.6.5.7.1 |
csOrionIKESvrParamMapNameThe map name for this server. DisplayString .1.3.6.1.4.1.3085.3.1.6.5.7.1.1 |
csOrionIKESvrParamFlagEach bit within this object specifies the compatibility options that the server uses by default. Below is a list of the features and their corresponding bits identifiers. options bit ------------------------------------------------------ old-pk-encryption-prf-key 0 old-payload-padding 1 old-message-padding 2 old-da-padding 3 old-id-in-hash 4 ignore-cert-request-payload 5 old-cr-format 6 use-zero-spi 7 End of description.rw Unsigned32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.2 |
csOrionIKESvrParamIpAddressThe address of the IKE server.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.5.7.1.3 |
csOrionIKESvrParamPortThe UDP port that the server is listening to.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.4 |
csOrionIKESvrParamRetryLimitLimits the number of ISAKMP packet transmission retries. The server retries the transmission if it does not receive a response in csOrionIKESvrParamRetryTimer seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.5 |
csOrionIKESvrParamRetryTimerThe amount of time, in seconds, that the server gives the remote end to reply to the sent request, before it will send the packet again. Fraction of a second must be specified in csOrionIKESvrParamRetryTimerMicroSec.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.6 |
csOrionIKESvrParamRetryTimerMicroSecThe microseconds part of csOrionIKESvrParamRetryTimer.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.7 |
csOrionIKESvrParamRetryTimerMaximumSpecifies the maximum value, in seconds, for the retry timer.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.8 |
csOrionIKESvrParamExpireTimerSpecifies the maximum time, in seconds, that the IKE server allows a negotiation to continue.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.9 |
csOrionIKESvrParamSecretRecreateA local secret recreation timer expressed in seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.10 |
csOrionIKESvrParamSPISizeA compatibility flag that specifies the number of bytes of zero that can be used when the security parameter index (SPI) of an ISAKMP security association is sent to the remote end.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.11 |
csOrionIKESvrParamMaxKeyLengthThe maximum length of an encryption key, specified in bytes, that is accepted by the local end.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.12 |
csOrionIKESvrParamMaxSACountLimits the maximum number of ISAKMP SA entries.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.13 |
csOrionIKESvrParamLocalSecretSizeThe length of the local secrets, specified in bits.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.5.7.1.14 |
csOrionIKESvrParamTokenHashTypeA reference to an algorithm configuration block that defines the anti-clogging token hash algorithm.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.7.1.15 |
csOrionIKESvrParamRowStatusA row status type for the IKE Server.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.7.1.16 |
csOrionIKESvrParamAuthenticationListThe name of the authentication server list that IKE uses for authentication services. If no listname is provided, the default authentication list of this VR will be used.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.7.1.17 |
csOrionIKESvrParamAuthorizationListThe name of the authorization server list that IKE uses for authorization services. If no listname is provided, the default authorization list of this VR will be used.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.7.1.18 |
csOrionIKESvrParamAccountingListThe name of the accounting server list that IKE uses for accounting services. If no listname is provided, the default accounting list of this VR will be used.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.5.7.1.19 |
csOrionIKESvrParamRadiusAcctUserTypePriority1Specifies the preferred user information to include in the RADIUS Accounting-Request User-Name attribute. Choices are: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will try the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority2.rw IKERadiusAcctUserType .1.3.6.1.4.1.3085.3.1.6.5.7.1.20 |
csOrionIKESvrParamRadiusAcctUserTypePriority2Specifies the user information to include in the RADIUS Accounting-Request User-Name attribute if the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority1 is not available: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will try the type specified in csOrionIKESvrParamRadiusAcctUserTypePriority3.rw IKERadiusAcctUserType .1.3.6.1.4.1.3085.3.1.6.5.7.1.21 |
csOrionIKESvrParamRadiusAcctUserTypePriority3Specifies the user information to include in the RADIUS Accounting-Request User-Name attribute if neither types specified in csOrionIKESvrParamRadiusAcctUserTypePriority1 and csOrionIKESvrParamRadiusAcctUserTypePriority2 are available: xauthUserId - xauth user login ID subjectAltName - subject alternative name from certificate distinguishedName - DN from certificate If the selected information is not available, IKE will include the assigned IP address in the user-name attribute.rw IKERadiusAcctUserType .1.3.6.1.4.1.3085.3.1.6.5.7.1.22 |
csOrionIpSecEvLogTableA table for Event Logging Control for IPSEC/IKE. NOTE: this table has been moved to {csOrionEncryptInfo 13} since it should be under VI level instead of VR level.obsolete SEQUENCE OF CsOrionIpSecEvLogEntry .1.3.6.1.4.1.3085.3.1.6.5.8 |
csOrionIpSecEvLogEntryEach entry contains the event logging level and area for the IPSEC/IKE module on a virtual router.obsolete CsOrionIpSecEvLogEntry .1.3.6.1.4.1.3085.3.1.6.5.8.1 |
csOrionIpSecEvLogLevelThis object is used to set the level of details for event logs for IPSEC/IKE.rwobsolete EvLogLevel .1.3.6.1.4.1.3085.3.1.6.5.8.1.1 |
csOrionIpSecEvLogAreaThis object is used to set the area of event logs for IPSEC/IKE.rwobsolete EvLogArea .1.3.6.1.4.1.3085.3.1.6.5.8.1.2 |
csOrionIpSecStatsTableThe IPSEC Statistics table. SEQUENCE OF CsOrionIpSecStatsEntry .1.3.6.1.4.1.3085.3.1.6.5.9 |
csOrionIpSecStatsEntryAn entry containing IPSEC statistics information for this Virtual Interface. CsOrionIpSecStatsEntry .1.3.6.1.4.1.3085.3.1.6.5.9.1 |
csOrionIpSecStatsRcvAhPktsDroppedThe number of dropped packets that were AH encrypted and were received in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.1 |
csOrionIpSecStatsRcvAhPktsBadAhThe number of bad AH packets that are AH encrypted and are received in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.2 |
csOrionIpSecStatsRcvAhPktsBadSpiThe number of bad SPI packets that are AH encrypted and are received in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.3 |
csOrionIpSecStatsRcvEspPktsDroppedThe number of dropped packets that were ESP encrypted and were received in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.4 |
csOrionIpSecStatsRcvEspPktsBadEspThe number of bad ESP packets that are ESP encrypted and were received in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.5 |
csOrionIpSecStatsRcvPktsOkThe number of good packets received in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.6 |
csOrionIpSecStatsTxPktsDeniedThe number of denied packets transmitted by this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.7 |
csOrionIpSecStatsEspTotalInboundSAsThe total number of ESP encrypted inbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.8 |
csOrionIpSecStatsEspTotalInboundSAsFailedThe total number of failed ESP encrypted inbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.9 |
csOrionIpSecStatsEspCurrentInboundSAsThe current number of ESP encrypted inbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.10 |
csOrionIpSecStatsEspTotalOutboundSAsThe total number of ESP encrypted outbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.11 |
csOrionIpSecStatsEspTotalOutboundSAsFailedThe total number of failed ESP encrypted outbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.12 |
csOrionIpSecStatsEspCurrentOutboundSAsThe current number of ESP encrypted outbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.13 |
csOrionIpSecStatsAhTotalInboundSAsThe total number of AH encrypted inbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.14 |
csOrionIpSecStatsAhTotalInboundSAsFailedThe total number of failed AH encrypted inbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.15 |
csOrionIpSecStatsAhCurrentInboundSAsThe current number of AH encrypted inbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.16 |
csOrionIpSecStatsAhTotalOutboundSAsThe total number of AH encrypted outbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.17 |
csOrionIpSecStatsAhTotalOutboundSAsFailedThe total number of failed AH encrypted outbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.18 |
csOrionIpSecStatsAhCurrentOutboundSAsThe current number of AH encrypted outbound SAs for this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.19 |
csOrionIpSecStatsEspCryptoCepEstablishOkThe number of crypto ceps that are ESP encrypted sucessfully established in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.20 |
csOrionIpSecStatsEspCryptoCepEstablishFailedThe number of crypto ceps that are ESP encrypted failed to establish in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.21 |
csOrionIpSecStatsAhCryptoCepEstablishOkThe number of crypto ceps that are AH encrypted sucessfully established in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.22 |
csOrionIpSecStatsAhCryptoCepEstablishFailedThe number of crypto ceps that are AH encrypted failed to establish in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.9.1.23 |
csOrionIpSecStatsEspEncryptPktsOkThe number of good ESP encrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.24 |
csOrionIpSecStatsEspDecryptPktsOkThe number of good ESP decrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.25 |
csOrionIpSecStatsAhEncryptPktsOkThe number of good AH encrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.26 |
csOrionIpSecStatsAhDecryptPktsOkThe number of good AH decrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.27 |
csOrionIpSecStatsEspEncryptPktsBadThe number of bad ESP encrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.28 |
csOrionIpSecStatsEspDecryptPktsBadThe number of bad ESP decrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.29 |
csOrionIpSecStatsAhEncryptPktsBadThe number of bad AH encrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.30 |
csOrionIpSecStatsAhDecryptPktsBadThe number of bad AH decrypted packets in this Virtual Interface.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.5.9.1.31 |
csOrionIKEStatsTableThe IKE Statistics table. SEQUENCE OF CsOrionIKEStatsEntry .1.3.6.1.4.1.3085.3.1.6.5.10 |
csOrionIKEStatsEntryAn entry containing IKE statistics information for this Virtual Interface. CsOrionIKEStatsEntry .1.3.6.1.4.1.3085.3.1.6.5.10.1 |
csOrionIKEStatsPhase1NegotiationsThe number of IKE phase 1 negotiations in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.1 |
csOrionIKEStatsPhase1NegotiationsFailedThe number of Failed IKE phase 1 negotiations in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.2 |
csOrionIKEStatsPhase1InPktsThe number of IKE phase 1 packets received in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.3 |
csOrionIKEStatsPhase1InPktsRejectedThe number of rejected IKE phase 1 packets received in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.4 |
csOrionIKEStatsPhase1OutPktsThe number of IKE phase 1 packets transmitted this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.5 |
csOrionIKEStatsPhase2NegotiationsThe number of IKE phase 2 negotiations in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.6 |
csOrionIKEStatsPhase2NegotiationsFailedThe number of Failed IKE phase 2 negotiations in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.7 |
csOrionIKEStatsPhase2InPktsThe number of IKE phase 2 packets received in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.8 |
csOrionIKEStatsPhase2InPktsRejectedThe number of rejected IKE phase 2 packets received in this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.9 |
csOrionIKEStatsPhase2OutPktsThe number of IKE phase 2 packets transmitted this Virtual Interface.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.10.1.10 |
csOrionIKEStateTableThe IKE State table. SEQUENCE OF CsOrionIKEStateEntry .1.3.6.1.4.1.3085.3.1.6.5.11 |
csOrionIKEStateEntryAn entry containing IKE state information for this Virtual Interface. CsOrionIKEStateEntry .1.3.6.1.4.1.3085.3.1.6.5.11.1 |
csOrionIKEStateSAIndexA unique value, greater than zero, for each SA. Integer32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.1 |
csOrionIKEStateLocalAddressThe local IP address of this SA.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.5.11.1.2 |
csOrionIKEStateRemoteAddressThe remote IP address of this SA.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.5.11.1.3 |
csOrionIKEStateInitRespondFlagIndicates if this SA is an initiator or a responder.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.5.11.1.4 |
csOrionIKEStateAuthenticationTypeThe authentication type of this SA. It could be a certificate or a pre-shared key.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.5.11.1.5 |
csOrionIKEStateCreationTimeThe creation time of this SA.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.11.1.6 |
csOrionIKEStateExpirationTimeThe expiration time of this SA.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.11.1.7 |
csOrionIKEStateNegotiationsThe number of phase 1 ISAKMP/IKE negotiations for this SA.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.8 |
csOrionIKEStateLastUsedThe last time this SA was used.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.11.1.9 |
csOrionIKEStateBytesTransferredThe number of bytes transferred by this SA.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.10 |
csOrionIKEStateCryptoAlgorithmThe name of the crypto algorithm for this SA.ro DisplayString .1.3.6.1.4.1.3085.3.1.6.5.11.1.11 |
csOrionIKEStateHashAlgorithmThe name of the hash algorithm for this SA.ro DisplayString .1.3.6.1.4.1.3085.3.1.6.5.11.1.12 |
csOrionIKEStatePrfAlgorithmThe name of the PRF algorithm for this SA.ro DisplayString .1.3.6.1.4.1.3085.3.1.6.5.11.1.13 |
csOrionIKEStateRetryLimitThe limit of retry counts for this SA.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.14 |
csOrionIKEStateRetryTimerThe retry interval in seconds. It indicates the duration from one retry to next retry for this SA. Fraction of a second must be specified in csOrionIKEStateRetryTimerMicroSec.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.15 |
csOrionIKEStateRetryTimerMicroSecThe micro-second part of csOrionIKEStateRetryTimer.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.16 |
csOrionIKEStateMaxRetryDurationThe maximum total retry duration for this SA. Fraction of a second must be specified in csOrionIKEStateMaxRetryDurationMicroSec.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.17 |
csOrionIKEStateMaxRetryDurationMicroSecThe micro-second part of csOrionIKEStateMaxRetryDuration.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.11.1.18 |
csOrionIKEDialupConnTableA table of IKE dialup connection table. SEQUENCE OF CsOrionIKEDialupConnEntry .1.3.6.1.4.1.3085.3.1.6.5.12 |
csOrionIKEDialupConnEntryEach entry contains a specific IKE dialup connection. CsOrionIKEDialupConnEntry .1.3.6.1.4.1.3085.3.1.6.5.12.1 |
csOrionIKEDialupConnIndexAn index that uniquely identifies an entry in the IKE dialup connection table. Integer32 .1.3.6.1.4.1.3085.3.1.6.5.12.1.1 |
csOrionIKEDialupConnRemIpAddressIP address of the remote IpSec tunnel.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.5.12.1.2 |
csOrionIKEDialupConnUserIdLogin ID of the dialup user, if the user uses Xauth. If Xauth is skipped, this will be an empty string.ro DisplayString .1.3.6.1.4.1.3085.3.1.6.5.12.1.3 |
csOrionIKEDialupConnDistinguishNameX.509 Distinguish Name of the dialup user, if the user uses certificates. For connection that does not use certificate, this will be an empty string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.12.1.4 |
csOrionIKEDialupConnRowStatusThis object allows for deletion of a connection if it is set to 'destroy'. 'active' is not a valid value to set. Get on this object will always yield 'active'.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.5.12.1.5 |
csOrionIpSecStateTableThe IPSEC State table. SEQUENCE OF CsOrionIpSecStateEntry .1.3.6.1.4.1.3085.3.1.6.5.13 |
csOrionIpSecStateEntryAn entry containing IPSEC state information for this Virtual Interface. CsOrionIpSecStateEntry .1.3.6.1.4.1.3085.3.1.6.5.13.1 |
csOrionIpSecStateSAIndexA unique value, greater than zero, for each SA. Integer32 .1.3.6.1.4.1.3085.3.1.6.5.13.1.1 |
csOrionIpSecStateSpiThe SPI is an arbitray 32-bit value that, in combintation with the destination IP address and security protocol(AH), uniquely identified the Security Association for this datagram.ro Unsigned32 .1.3.6.1.4.1.3085.3.1.6.5.13.1.2 |
csOrionIpSecStateSAFlagA flag Containing info regarding this SA. The value of the flag is the combination of the following values: tunnel-only (1), transport-only (2), esp-rfc1827 (8), ah-rfc1826 (16), esp-rfc2045 (32), ah-rfc1828 (64), ah-rfc2202 (128) Giving an example: the value 33 represents tunnel + esp-rfc2045ro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.13.1.3 |
csOrionIpSecStateProtocolThe protocol being used by this SA. This value is connected to General Access list protocol.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.5.13.1.4 |
csOrionIpSecStatePortThe port number of the protocol; this value is connected to General Access list port number.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.13.1.5 |
csOrionIpSecStateCreatorTypeThe creator type of this SA.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.5.13.1.6 |
csOrionIpSecStateRemoteGatewayThe IP address of remote gateway.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.5.13.1.7 |
csOrionIpSecStateLocalGatewayThe IP address of local gateway.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.5.13.1.8 |
csOrionIpSecStateRemoteEndPointThe IP address of remote end point.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.5.13.1.9 |
csOrionIpSecStateLocalEndPointThe IP address of local end point.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.5.13.1.10 |
csOrionIpSecStateAlgorithmTypeThe algorithm type of this SA.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.5.13.1.11 |
csOrionIpSecStateSATypeThe type of this SA.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.5.13.1.12 |
csOrionIpSecStateExpireIndicate when this SA will be dropped.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.13.1.13 |
csOrionIpSecStateLastUsedThe last time this SA was used.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.5.13.1.14 |
csOrionIpSecStateDirectionThe sending and receiving direction of this SA.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.5.13.1.15 |
csOrionIpSecStateEncryptionAlgorithmThe name of the encryption algorithm for this SA.ro DisplayString .1.3.6.1.4.1.3085.3.1.6.5.13.1.16 |
csOrionIpSecStateHashAlgorithmThe name of the hash algorithm for this SA.ro DisplayString .1.3.6.1.4.1.3085.3.1.6.5.13.1.17 |
csOrionIpSecEventLogTableA table for Event Logging Control for IPSEC/IKE. SEQUENCE OF CsOrionIpSecEventLogEntry .1.3.6.1.4.1.3085.3.1.6.5.14 |
csOrionIpSecEventLogEntryEach entry contains the event logging level and area for the IPSEC/IKE module on a virtual router. CsOrionIpSecEventLogEntry .1.3.6.1.4.1.3085.3.1.6.5.14.1 |
csOrionIpSecEventLogLevelThis object is used to set the level of details for event logs for IPSEC/IKE.rw EvLogLevel .1.3.6.1.4.1.3085.3.1.6.5.14.1.1 |
csOrionIpSecEventLogAreaThis object is used to set the area of event logs for IPSEC/IKE.rw EvLogArea .1.3.6.1.4.1.3085.3.1.6.5.14.1.2 |
csOrionEncryptInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.5.15 |
csOrionQueueInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.6 |
csOrionVncQueueTableA list of VNC Queues for each Virtual Interfaces. Each queue is assigned a minimum and maximum bandwidth. SEQUENCE OF CsOrionVncQueueEntry .1.3.6.1.4.1.3085.3.1.6.6.1 |
csOrionVncQueueEntryAn entry containing management information applicable to a particular virtual interface's vnc queue. CsOrionVncQueueEntry .1.3.6.1.4.1.3085.3.1.6.6.1.1 |
csOrionVncQueueIdThe Id of this particular queue. Integer32 .1.3.6.1.4.1.3085.3.1.6.6.1.1.1 |
csOrionVncQueueAclIdThe Id of an access list entry (from csOrionGenAclTable). All packets transmitted on this virtual that satisfy that access list entry are placed in this queue. Integer32 .1.3.6.1.4.1.3085.3.1.6.6.1.1.2 |
csOrionVncQueueMinBwThe minimum bandwidth allocated to this queue.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.6.1.1.3 |
csOrionVncQueueMaxBwThe maximum bandwidth allocated to this queue.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.6.1.1.4 |
csOrionVncQueueRowStatusA row status type for this Rate Allocation Queue.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.6.1.1.5 |
csOrionPppInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.7 |
csOrionPppConfigTableThis table contains general PPP configuration parameters. SEQUENCE OF CsOrionPppConfigEntry .1.3.6.1.4.1.3085.3.1.6.7.1 |
csOrionPppConfigEntryEach entry represents the PPP configuration parameters for a single Virtual Router. CsOrionPppConfigEntry .1.3.6.1.4.1.3085.3.1.6.7.1.1 |
csOrionPppConfigHostnameThe name of this Virtual Router used during pap/chap authentication.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.7.1.1.1 |
csOrionPppIfConfigTableThis table contains interface-specific PPP configuration parameters. SEQUENCE OF CsOrionPppIfConfigEntry .1.3.6.1.4.1.3085.3.1.6.7.2 |
csOrionPppIfConfigEntryEach entry represents the PPP interface-specific configuration parameters for a single Logical Interface. CsOrionPppIfConfigEntry .1.3.6.1.4.1.3085.3.1.6.7.2.1 |
csOrionPppIfSlotIndexThe Slot Id of this Logical Interface. Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.1 |
csOrionPppIfModuleIndexThe Module Index of this Logical Interface. Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.2 |
csOrionPppIfPortIndexThe Port Id of this Logical Interface. Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.3 |
csOrionPppIfChIndexThe Channel Id of this Logical Interface. Channel is 0 if this object is in the Unchannelized DS3/E3 or ATM PVC. Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.4 |
csOrionPppIfSubIfIndexThe identifier for this logical interface. This corresponds to the 'subinterface' entered via the CLI. A sub-if 0 will be used for PPP objects other than in PPP over ATM. Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.5 |
csOrionPppIfConfigAuthThe type of authentication used by PPP over this Logical Interface.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.7.2.1.6 |
csOrionPppIfEncryptionNOTE: This object has been obsoleted.rwobsolete Enumeration .1.3.6.1.4.1.3085.3.1.6.7.2.1.7 |
csOrionPppIfEncryptionModeNOTE: This object has been obsoleted.rwobsolete Enumeration .1.3.6.1.4.1.3085.3.1.6.7.2.1.8 |
csOrionPppIfRetransmitThe maximum number of PPP retransmissions attempted on this Logical Interface.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.9 |
csOrionPppIfConfigReqRtxThe maximum number of PPP configuration request retransmissions attempted on this Logical Interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.10 |
csOrionPppIfTerminateReqRtxThe maximum number of PPP terminate request retransmissions attempted on this Logical Interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.11 |
csOrionPppIfTimeoutThe amount of time (in seconds) between retransmit attempts on this Logical Interface.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.12 |
csOrionPppIfReauthThe amount of time (in seconds) between re-authentication requests on an established PPP connection on this Logical Interface. The value 0 disabled re-authentication.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.13 |
csOrionPppIfAdminStatusThis object is used to enable/disable the PPP.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.7.2.1.14 |
csOrionPppIfOperStatusThe operational status for this interface.ro OperStatus .1.3.6.1.4.1.3085.3.1.6.7.2.1.15 |
csOrionPppIfEvLogLevelThis object is used to set the level of details for event logs for PPP. Events with level higher than this object will not be logged.rw EvLogLevel .1.3.6.1.4.1.3085.3.1.6.7.2.1.16 |
csOrionPppIfEvLogAreaThis object is used to set the area of event logs for PPP. Events which area is not specified in this object will not be logged.rw EvLogArea .1.3.6.1.4.1.3085.3.1.6.7.2.1.17 |
csOrionPppIfEchoTimeoutThe echo timeout (keepalive) in seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.7.2.1.18 |
csOrionPppRemoteUserTableThis table contains remote username/password pairs. This database is used to authenticate remote users via PAP or CHAP. SEQUENCE OF CsOrionPppRemoteUserEntry .1.3.6.1.4.1.3085.3.1.6.7.3 |
csOrionPppRemoteUserEntryEach entry represents a single username, password pair. CsOrionPppRemoteUserEntry .1.3.6.1.4.1.3085.3.1.6.7.3.1 |
csOrionPppRemoteUserNameThe name of a remote user. DisplayString .1.3.6.1.4.1.3085.3.1.6.7.3.1.1 |
csOrionPppRemoteUserPasswordThe password of a remote user.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.7.3.1.2 |
csOrionPppRemoteUserRowStatusThe RowStatus object for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.7.3.1.3 |
csOrionPppRemoteUserConnProfileThe connection profile for this user. Refer to csOrionConnectionProfileName object.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.7.3.1.4 |
csOrionPppInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.7.4 |
csOrionPptpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.8 |
csOrionPptpConfTableThis table contains general Pptp Configuration parameters. SEQUENCE OF CsOrionPptpConfEntry .1.3.6.1.4.1.3085.3.1.6.8.1 |
csOrionPptpConfEntryEach entry represents a set of Pptp configuration for a single Virtual Router. CsOrionPptpConfEntry .1.3.6.1.4.1.3085.3.1.6.8.1.1 |
csOrionPptpConfStatusThis object enables or disables the PPTP Server on this Virtual Router.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.8.1.1.1 |
csOrionPptpConfMaxConnThe maximum number of simultaneous Pptp connections supported by this Virtual Router.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.8.1.1.2 |
csOrionPptpConfIdleTimeoutThe amount of time the Pptp server allows a connection to remain idle. A value 0 would mean no timeout.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.8.1.1.3 |
csOrionPptpConfPPPKeepAliveIntervalThe timeout interval value the PPTP connection uses to send PPP keepalive requests. A value 0 would mean no timeout.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.8.1.1.4 |
csOrionPptpConfEncryptionThe type of encryption used by PPTP Server on this Virtual Router.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.8.1.1.5 |
csOrionPptpConfAuthenticationThe type of authentication used by PPTP Server on this Virtual Router.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.8.1.1.6 |
csOrionPptpConfIpPoolThis object identifies the Ip Local Address Pool that should be used by this PPTP Server to assign addresses to dynamic PPTP connections.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.8.1.1.7 |
csOrionPptpConnTableThis table identifies all the current Pptp connections on this Virtual Router. SEQUENCE OF CsOrionPptpConnEntry .1.3.6.1.4.1.3085.3.1.6.8.2 |
csOrionPptpConnEntryEach entry represents a single Pptp connection. CsOrionPptpConnEntry .1.3.6.1.4.1.3085.3.1.6.8.2.1 |
csOrionPptpConnFarIpAddrThis object identifies the far end of a Pptp connection. IpAddress .1.3.6.1.4.1.3085.3.1.6.8.2.1.1 |
csOrionPptpConnLocalIpAddrThis object identifies the local end of a Pptp connection. IpAddress .1.3.6.1.4.1.3085.3.1.6.8.2.1.2 |
csOrionPptpConnAgeThe age (in seconds) of this Pptp connection.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.8.2.1.3 |
csOrionPptpConnStatusThis object can be used to remove a Pptp connection by setting the value to disabled.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.8.2.1.4 |
csOrionPptpConnFarUsernameThis is the username on the other end of the connection.ro DisplayString .1.3.6.1.4.1.3085.3.1.6.8.2.1.5 |
csOrionPptpInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.8.3 |
csOrionRadiusInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.9 |
csOrionVrRadiusConfigTableThis table contains Radius configuration parameters. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.obsolete SEQUENCE OF CsOrionVrRadiusConfigEntry .1.3.6.1.4.1.3085.3.1.6.9.1 |
csOrionVrRadiusConfigEntryEach entry represents the Radius configuration parameters for a single VR.obsolete CsOrionVrRadiusConfigEntry .1.3.6.1.4.1.3085.3.1.6.9.1.1 |
csOrionVrRadiusRetransmitThe number of times a Radius Server will be queried before moving to the next Radius Server in the list identified by csOrionVrRadiusList.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.6.9.1.1.1 |
csOrionVrRadiusTimeoutThe amount of time (in seconds) this Virtual Router will wait for a Radius Server before timing out.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.6.9.1.1.2 |
csOrionVrRadiusSvrTableA list of RADIUS authentication servers. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.obsolete SEQUENCE OF CsOrionVrRadiusSvrEntry .1.3.6.1.4.1.3085.3.1.6.9.2 |
csOrionVrRadiusSvrEntryAn entry containing management information applicable to a particular RADIUS Server.obsolete CsOrionVrRadiusSvrEntry .1.3.6.1.4.1.3085.3.1.6.9.2.1 |
csOrionVrRadiusSvrPriorityThe relative priority of this RADIUS server in this list.obsolete Integer32 .1.3.6.1.4.1.3085.3.1.6.9.2.1.1 |
csOrionVrRadiusSvrAddressThe IP address of this RADIUS server in this list.rwobsolete IpAddress .1.3.6.1.4.1.3085.3.1.6.9.2.1.2 |
csOrionVrRadiusSvrKeyThe authentication and encryption key used for all Radius communication between the Virtual Router and this Radius Server.rwobsolete OCTET STRING .1.3.6.1.4.1.3085.3.1.6.9.2.1.3 |
csOrionVrRadiusSvrRowStatusThe Admin Status type for this entry in the Radius Server Table.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.9.2.1.4 |
csOrionVrRadiusSvrOperStatusThe operational status for this entry in the Radius Server Table.roobsolete OperStatus .1.3.6.1.4.1.3085.3.1.6.9.2.1.5 |
csOrionVrRadiusSvrPortRadius client uses the default port 1812 for AA requests. This will not work with the old radius servers which uses 1645 for AA requests. To support the old port, we throw in this extra parameter.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.6.9.2.1.6 |
csOrionVrRadiusAcctSvrTableA list of RADIUS accounting servers. This table is obsoleted as of release 3.0 in favor of csOrionAAAServerConfigTable and csOrionAAAServerListConfigTable.obsolete SEQUENCE OF CsOrionVrRadiusAcctSvrEntry .1.3.6.1.4.1.3085.3.1.6.9.3 |
csOrionVrRadiusAcctSvrEntryAn entry containing management information applicable to a particular RADIUS Accounting Server.obsolete CsOrionVrRadiusAcctSvrEntry .1.3.6.1.4.1.3085.3.1.6.9.3.1 |
csOrionVrRadiusAcctSvrPriorityThe relative priority of this RADIUS accounting server in this list.obsolete Integer32 .1.3.6.1.4.1.3085.3.1.6.9.3.1.1 |
csOrionVrRadiusAcctSvrAddressThe IP address of this RADIUS accounting server in this list.rwobsolete IpAddress .1.3.6.1.4.1.3085.3.1.6.9.3.1.2 |
csOrionVrRadiusAcctSvrKeyThe authentication and encryption key used for all Radius communication between the Virtual Router and this Radius Accounting Server.rwobsolete OCTET STRING .1.3.6.1.4.1.3085.3.1.6.9.3.1.3 |
csOrionVrRadiusAcctSvrRowStatusThe Admin Status type for this entry in the Radius Accounting Server Table.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.9.3.1.4 |
csOrionVrRadiusAcctSvrOperStatusThe operational status for this entry in the Radius Accounting Server Table.roobsolete OperStatus .1.3.6.1.4.1.3085.3.1.6.9.3.1.5 |
csOrionVrRadiusAcctSvrPortRadius client uses the default port 1813 for ACCT requests. This will not work with the old radius servers which uses 1646 for ACCT requests. To support the old port, we throw in this extra parameter.rwobsolete Integer32 .1.3.6.1.4.1.3085.3.1.6.9.3.1.6 |
csOrionRadiusInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.9.4 |
csOrionDNSInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.10 |
csOrionVrDnsConfigTableThis table contains DNS configuration parameters. SEQUENCE OF CsOrionVrDnsConfigEntry .1.3.6.1.4.1.3085.3.1.6.10.1 |
csOrionVrDnsConfigEntryEach entry represents the DNS configuration parameters for a single VR. CsOrionVrDnsConfigEntry .1.3.6.1.4.1.3085.3.1.6.10.1.1 |
csOrionVrPrimaryDnsServerThe primary DNS server for this VR.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.10.1.1.1 |
csOrionVrSecondaryDnsServerThe secondary DNS server for this VR.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.10.1.1.2 |
csOrionDNSInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.10.2 |
csOrionCiscoHdlcInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.11 |
csOrionCiscoHdlcConfigTableThis table contains configuration parameters for Cisco HDLC. SEQUENCE OF CsOrionCiscoHdlcConfigEntry .1.3.6.1.4.1.3085.3.1.6.11.1 |
csOrionCiscoHdlcConfigEntryEach entry represents the Cisco HDLC interface-specific configuration parameters for a single interface. CsOrionCiscoHdlcConfigEntry .1.3.6.1.4.1.3085.3.1.6.11.1.1 |
csOrionCiscoHdlcSlotIndexThe Slot Id of this interface. Integer32 .1.3.6.1.4.1.3085.3.1.6.11.1.1.1 |
csOrionCiscoHdlcModuleIndexThe Module Id of this interface. Integer32 .1.3.6.1.4.1.3085.3.1.6.11.1.1.2 |
csOrionCiscoHdlcPortIndexThe Port Id of this interface. Integer32 .1.3.6.1.4.1.3085.3.1.6.11.1.1.3 |
csOrionCiscoHdlcChIndexThe Channel Id of this interface. Channel is 0 if this object is in the Unchannelized DS3. Integer32 .1.3.6.1.4.1.3085.3.1.6.11.1.1.4 |
csOrionCiscoHdlcSlarpKeepAliveThe interval, in second, between keep alive packets.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.11.1.1.5 |
csOrionCiscoHdlcOperStatusThe operational status of this table.ro OperStatus .1.3.6.1.4.1.3085.3.1.6.11.1.1.6 |
csOrionCiscoHdlcAdminStatusThis object is used to enable/disable the Cisco HDLC.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.11.1.1.7 |
csOrionCiscoHdlcInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.11.2 |
csOrionFRoIPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.12 |
csOrionFRoIPConfTableThis table contains general FRoIP Configuration parameters. SEQUENCE OF CsOrionFRoIPConfEntry .1.3.6.1.4.1.3085.3.1.6.12.1 |
csOrionFRoIPConfEntryEach entry represents a set of FRoIPconfiguration for a Virtual Router. There is only one instance of FRoIP on a Virtual Router. An entry is created with IP address and default values for all the other objects when a VR is created. Creation of row by Network Management Stations is not allowed. CsOrionFRoIPConfEntry .1.3.6.1.4.1.3085.3.1.6.12.1.1 |
csOrionFRoIPVIfaceIdrw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.1.1.1 |
csOrionFRoIPConfMaxPeerrw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.1.1.2 |
csOrionFRoIPConfDefaultWindowSizerw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.1.1.3 |
csOrionFRoIPConfDefaultWindowTimeoutrw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.1.1.4 |
csOrionFRoIPConfDefaultServiceSlotThis object identifies the slot that all new transports created off this base inherit.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.1.1.5 |
csOrionFRoIPConfNumActiveTransportsro Integer32 .1.3.6.1.4.1.3085.3.1.6.12.1.1.6 |
csOrionFRoIPAdminStatusrw Enumeration .1.3.6.1.4.1.3085.3.1.6.12.1.1.7 |
csOrionFRoIPOperStatusro OperStatus .1.3.6.1.4.1.3085.3.1.6.12.1.1.8 |
csOrionFRoIPTransportTableThis table contains transport related objects of FRoIP. SEQUENCE OF CsOrionFRoIPTransportEntry .1.3.6.1.4.1.3085.3.1.6.12.2 |
csOrionFRoIPTransportEntryEach entry represents a set of transport related objects of FRoIP on a Virtual Router. CsOrionFRoIPTransportEntry .1.3.6.1.4.1.3085.3.1.6.12.2.1 |
csOrionFRoIPTransportPeer IpAddress .1.3.6.1.4.1.3085.3.1.6.12.2.1.1 |
csOrionFRoIPTransportModero Enumeration .1.3.6.1.4.1.3085.3.1.6.12.2.1.2 |
csOrionFRoIPTransportWindowSizerw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.3 |
csOrionFRoIPTransportWindowTimeoutIn millisecondsrw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.4 |
csOrionFRoIPTransportKeepAliverw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.5 |
csOrionFRoIPTransportEventWindowSizerw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.6 |
csOrionFRoIPTransportPermittedBadEventsrw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.7 |
csOrionFRoIPTransportDefaultSlotro Integer32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.8 |
csOrionFRoIPTransportOutPktsro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.9 |
csOrionFRoIPTransportInPktsro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.10 |
csOrionFRoIPTransportOutBytesro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.11 |
csOrionFRoIPTransportInBytesro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.2.1.12 |
csOrionFRoIPTransportRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.12.2.1.13 |
csOrionFRoIPTransportAdminStatusrw Enumeration .1.3.6.1.4.1.3085.3.1.6.12.2.1.14 |
csOrionFRoIPTransportOperStatusro OperStatus .1.3.6.1.4.1.3085.3.1.6.12.2.1.15 |
csFRoIPCircuitTableA table containing information about virtual circuits corresponding to FRoIP Transports.. SEQUENCE OF CsFRoIPCircuitEntry .1.3.6.1.4.1.3085.3.1.6.12.3 |
csFRoIPCircuitEntryThe information regarding a single Data Link Connection. Discontinuities in the counters contained in this table are indicated by the value in csFrCircuitCreationTime. CsFRoIPCircuitEntry .1.3.6.1.4.1.3085.3.1.6.12.3.1 |
csFRoIPCircuitDlciThe Data Link Connection Identifier for this virtual circuit. Note, this impelemtation supports only values between 16 and 1023 (inclusive). DLCI .1.3.6.1.4.1.3085.3.1.6.12.3.1.1 |
csFRoIPCircuitStateIndicates whether the particular virtual circuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by setting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit. The use of 'invalid' is deprecated in this SNMP Version 2 MIB, in favor of csFRoIPCircuitRowStatus.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.12.3.1.2 |
csFRoIPCircuitReceivedFECNsNumber of frames received from the network indicating forward congestion since the virtual circuit was created. This occurs when the remote DTE sets the FECN flag, or when a switch in the network enqueues the frame to a trunk whose transmission queue is congested.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.3 |
csFRoIPCircuitReceivedBECNsNumber of frames received from the network indicating backward congestion since the virtual circuit was created. This occurs when the remote DTE sets the BECN flag, or when a switch in the network receives the frame from a trunk whose transmission queue is congested.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.4 |
csFRoIPCircuitSentFramesThe number of frames sent from this virtual circuit since it was created.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.5 |
csFRoIPCircuitSentOctetsThe number of octets sent from this virtual circuit since it was created. Octets counted are the full frame relay header and the payload, but do not include the flag characters or CRC.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.6 |
csFRoIPCircuitReceivedFramesNumber of frames received over this virtual circuit since it was created.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.7 |
csFRoIPCircuitReceivedOctetsNumber of octets received over this virtual circuit since it was created. Octets counted include the full frame relay header, but do not include the flag characters or the CRC.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.8 |
csFRoIPCircuitCreationTimeThe value of sysUpTime when the virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.12.3.1.9 |
csFRoIPCircuitLastTimeChangeThe value of sysUpTime when last there was a change in the virtual circuit statero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.12.3.1.10 |
csFRoIPCircuitCommittedBurstThis variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.11 |
csFRoIPCircuitExcessBurstThis variable indicates the maximum amount of uncommitted data bits that the network will attempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.12 |
csFRoIPCircuitThroughputThroughput is the average number of 'Frame Relay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement interval. If the configured committed burst rate and throughput are both non-zero, the measurement interval, T, is T=csFRoIPCircuitCommittedBurst/csFRoIPCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement interval, T, is T=csFRoIPCircuitExcessBurst/ifSpeed.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.13 |
csFRoIPCircuitMulticastThis indicates whether this VC is used as a unicast VC (i.e. not multicast) or the type of multicast service subscribed toro Enumeration .1.3.6.1.4.1.3085.3.1.6.12.3.1.14 |
csFRoIPCircuitTypeIndication of whether the VC was manually created (static), or dynamically created (dynamic) via the data link control management interface.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.12.3.1.15 |
csFRoIPCircuitDiscardsThe number of inbound frames dropped because of format errors, or because the VC is inactive.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.16 |
csFRoIPCircuitReceivedDEsNumber of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.17 |
csFRoIPCircuitSentDEsNumber of frames sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.12.3.1.18 |
csFRoIPCircuitRowStatusThis object is used to create a new row or modify or destroy an existing row in the manner described in the definition of the RowStatus textual convention. Writable objects in the table may be written in any RowStatus state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.12.3.1.19 |
csFRoIPCircuitOperStatusThe operational status of this circuit.ro OperStatus .1.3.6.1.4.1.3085.3.1.6.12.3.1.20 |
csFRoIPCircuitFwdLinkThe forwarding link of this DLCI. This is a switching parameters for intra blade and inter-blade switching. It takes the following format: byte #0 to #3 : Slot number (csFRoIPDlcmiSlot) byte #4 to #7 : Port number (csFRoIPDlcmiPort) byte #8 to #11 : Channel number (csFRoIPDlcmiChannel, zero for unchannelized blade) byte #12 to #15: DLCI number (csFRoIPCircuitDlci) NOTE: all zero indicates that this DLCI is not connected to any link.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.12.3.1.21 |
csFRoIPCircuitTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.12.4 |
csOrionL2tpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.13 |
csOrionL2tpConfigTableThis table contains general L2TP configuration parameters. IMPORTANT : Tunnels and session parameters are established using the parameters in this table. That means, changing the value of an object in this table will not affect existing tunnels and session. It will be applied for the tunnels and session that are to be established. SEQUENCE OF CsOrionL2tpConfigEntry .1.3.6.1.4.1.3085.3.1.6.13.1 |
csOrionL2tpConfigEntryEach entry represents a single L2TP object for a Virtual Router. Only a single instance of this object is created upon creation of a VR. CsOrionL2tpConfigEntry .1.3.6.1.4.1.3085.3.1.6.13.1.1 |
csOrionL2tpConfigServiceIfThis object defines the VI over which communication will occur with peers. This object can be set only when there is no tunnel.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.1 |
csOrionL2tpConfigMaxTunnelsThis object defines the maximum number of L2TP tunnels that can be established.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.2 |
csOrionL2tpConfigMaxSessionsPerTunnelThis object defines the maximum sessions that can be established per tunnel.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.3 |
csOrionL2tpConfigTunnelAuthenticationThis object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.13.1.1.4 |
csOrionL2tpConfigTunnelHelloIntervalThis object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. Setting this to 0 disables sending of HELLO packetsrw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.5 |
csOrionL2tpConfigTunnelMaxRetransmissionsThis object defines the number of retransmissions which the tunnel will attempt before assuming that the peer is no longer responding.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.6 |
csOrionL2tpConfigTunnelMaxRetransmissionTimeoutThis object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a control packet that has not been acknowledged.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.7 |
csOrionL2tpConfigTunnelRWSThis object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send without waiting for an acknowledgement from this peer.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.8 |
csOrionL2tpConfigTunnelEmptyTunnelTimeoutThis object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be torn down. Setting this to 0 will allow the empty tunnel to continue to exist until either the peer stops responding or the the tunnel is torn down by peer or the administrator.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.9 |
csOrionL2tpConfigSessionFlowControlThis object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of the setting, if the peer requests that this peer flow control its transmissions, that request will be honored. Session Flow Control was part of draft specifications but not part of the RFC. This object should be set to Enable only if all the peers are using draft implementations.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.13.1.1.10 |
csOrionL2tpConfigSessionRWSThis object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.11 |
csOrionL2tpConfigSessionTxQueueSizeThis object controls the size of the session-specific transmit queue. If the peer has requested flow control and the peer's session receive window is full, packets to be sent to that peer will be held in a queue waiting for the peer's receive window to open.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.12 |
csOrionL2tpConfigSessionPacketSequencingThis object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel peer.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.13.1.1.13 |
csOrionL2tpConfigPppConfigReqRetransmissionThis object is identical to csOrionPppIfConfigReqRtx.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.14 |
csOrionL2tpConfigPppRestartTimeoutThis object is identical to csOrionPppIfTimeout.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.15 |
csOrionL2tpConfigPppTermReqRetransmissionThis object is identical to csOrionPppIfTerminateReqRtx.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.16 |
csOrionL2tpConfigPppAuthProtocolThis object is identical to csOrionPppIfConfigAuth.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.13.1.1.17 |
csOrionL2tpConfigPppReauthPeriodThis object is identical to csOrionPppIfReauth.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.18 |
csOrionL2tpConfigPppEchoTimeoutThe echo timeout in seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.1.1.19 |
csOrionL2tpConfigPppIpPoolNameThe name of this address pool. This is used to identify a specific address pool.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.13.1.1.20 |
csOrionL2tpTunnelTableThe entries in this table are the L2TP tunnels that have been established with various peers. SEQUENCE OF CsOrionL2tpTunnelEntry .1.3.6.1.4.1.3085.3.1.6.13.2 |
csOrionL2tpTunnelEntryEach entry represents a single L2TP tunnel established with a peer. CsOrionL2tpTunnelEntry .1.3.6.1.4.1.3085.3.1.6.13.2.1 |
csOrionL2tpTunnelLocalIdEach tunnel is assigned a random locally unique identifier when the tunnel is created. The tunnel identifier can be used as an index for the tunnel table. Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.1 |
csOrionL2tpTunnelMaxSessionsThis object defines the maximum sessions that can be established in this tunnel. NOTE : Not used at this time.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.2 |
csOrionL2tpTunnelAuthenticationThis object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.2.1.3 |
csOrionL2tpTunnelHelloIntervalThis object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. The value 0 indicates that sending of HELLO packets is disabledro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.4 |
csOrionL2tpTunnelMaxRetransmissionsThis object defines the number of retransmission's which the tunnel will attempt before assuming that the peer is no longer responding.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.5 |
csOrionL2tpTunnelMaxRetransmissionTimeoutThis object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a control packet that has not been acknowledged.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.6 |
csOrionL2tpTunnelRWSThis object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send without waiting for an acknowledgement from this peer.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.7 |
csOrionL2tpTunnelEmptyTunnelTimeoutThis object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be torn down. The value 0 indicates that the empty tunnel will continue to exist until either the peer stops responding or the the tunnel is torn down by peer or the administrator.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.8 |
csOrionL2tpTunnelUpTimeThis object indicates the number of seconds this tunnel has been up since it was established.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.9 |
csOrionL2tpTunnelRemoteIpAddressThis index identifies the IP Address of the peer.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.13.2.1.10 |
csOrionL2tpTunnelRemoteTunnelIdThis object is the identifier assigned to the tunnel by the peer. This identifier is unique only for a given peer.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.11 |
csOrionL2tpTunnelRemoteUdpPortThis object identifies the UDP port that the peer is using for communication.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.12 |
csOrionL2tpTunnelRemoteRWSThis is the control receive window size advertised by the peer during tunnel creation. It specifies the number of control packets that can be sent to the peer without waiting for an acknowledgement.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.13 |
csOrionL2tpTunnelRemoteHostnameThis is the name that the peer used to identify itself during tunnel creationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.13.2.1.14 |
csOrionL2tpTunnelActiveSessionsCountThis is the number of sessions that are currently present within this tunnelro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.2.1.15 |
csOrionL2tpTunnelStatusThe row status for this table. Used only for deleting this tunnel. IMPORTANT: (1) entries on this table are created when a tunnel is established by the peer. Therefore, creation of entry thru SNMP SET request is not allowed. (2) tunnel is usually torn down by the peer.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.13.2.1.16 |
csOrionL2tpSessionTableThe entries in this table are the L2TP sessions established in a specific tunnel. SEQUENCE OF CsOrionL2tpSessionEntry .1.3.6.1.4.1.3085.3.1.6.13.3 |
csOrionL2tpSessionEntryEach entry represents a single session object in a specific tunnel. CsOrionL2tpSessionEntry .1.3.6.1.4.1.3085.3.1.6.13.3.1 |
csOrionL2tpSessionLocalIdEach session is assigned a random locally unique tunnel-specific identifier when it is created. The session identifier can be used as an index to identify a particular session in a tunnel. Integer32 .1.3.6.1.4.1.3085.3.1.6.13.3.1.1 |
csOrionL2tpSessionFlowControlThis object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of the setting, if the peer requests that this peer flow control its transmissions, that request will be honored. Session Flow Control was part of draft specifications but not part of the RFC. This object should be set to Enable only if all the peers are using draft implementations.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.3.1.2 |
csOrionL2tpSessionRWSThis object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.3.1.3 |
csOrionL2tpSessionTxQueueSizeIf the peer has requested flow control and the peer's session receive window is full, packets to be sent to that peer will be held in a queue waiting for the peer's receive window to open. This object controls the size of the session-specific transmit queue.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.3.1.4 |
csOrionL2tpSessionPacketSequencingThis object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel peer.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.3.1.5 |
csOrionL2tpSessionUpTimeThis object indicates the number of seconds this session has been up since established.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.3.1.6 |
csOrionL2tpSessionRemoteCallIdThis object is the identifier assigned to the session by the peer. This identifier is unique only for a given peer in a specific tunnel.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.3.1.7 |
csOrionL2tpSessionRemoteFlowControlThis object indicates whether flow control is requested by the peer or not.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.3.1.8 |
csOrionL2tpSessionRemoteRWSThis is the session receive window size advertised by the peer during session creation. It specifies the number of payload packets that can be sent to the peer without waiting for an acknowledgement. If this is non-zero it means that the peer has requested flow control.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.3.1.9 |
csOrionL2tpSessionUsernameThis is the name of the user on whose behalf the session was created.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.13.3.1.10 |
csOrionL2tpSessionRowStatusThe row status for this table. Used only for deleting this session. IMPORTANT: (1) entries on this table are created when a session is established by the peer. Therefore, creation of entry thru SNMP SET request is not allowed. (2) the peer usually tears down the session.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.13.3.1.11 |
csOrionL2tpSessionLocalIpAddressThe IP address for this sesssion. It is dynamically assigned form the csOrionL2tpConfigPppIpPoolName.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.13.3.1.12 |
csOrionL2tpSessionRemoteIpAddressThe IP address on the other side of this sesssion.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.13.3.1.13 |
csOrionL2tpSessionCallTypeThis object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.3.1.14 |
csOrionL2tpSessionStateThis object determines the current state of the session or call.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.3.1.15 |
csOrionLnsConfigTableThis table contains general L2TP Network Server (LNS) configuration parameters. SEQUENCE OF CsOrionLnsConfigEntry .1.3.6.1.4.1.3085.3.1.6.13.4 |
csOrionLnsConfigEntryEach entry represents a single LNS object for a Virtual Router. There is only one instance of LNS on a Virtual Router. This object is created along with an L2TP object when a VR is created. CsOrionLnsConfigEntry .1.3.6.1.4.1.3085.3.1.6.13.4.1 |
csOrionLnsConfigAdminStatusSetting this object to 'disable' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Setting this object to 'drain' will prevent any new tunnels and/or sessions to be either initiated or accepted but does NOT disconnect any active tunnels/sessions.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.13.4.1.1 |
csOrionLacConfigTableThis table contains general L2TP Network Server (LNS) configuration parameters. SEQUENCE OF CsOrionLacConfigEntry .1.3.6.1.4.1.3085.3.1.6.13.5 |
csOrionLacConfigEntryEach entry represents a single LAC object for a Virtual Router. There is only one instance of LAC on a Virtual Router. This object is created along with an L2TP object when a VR is created. CsOrionLacConfigEntry .1.3.6.1.4.1.3085.3.1.6.13.5.1 |
csOrionLacConfigAdminStatusSetting this object to 'disable' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Setting this object to 'drain' will prevent any new tunnels and/or sessions to be either initiated or accepted but does NOT disconnect any active tunnels/sessions.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.13.5.1.1 |
csOrionTunnelSwitchTableto do... SEQUENCE OF CsOrionTunnelSwitchEntry .1.3.6.1.4.1.3085.3.1.6.13.6 |
csOrionTunnelSwitchEntryto do... CsOrionTunnelSwitchEntry .1.3.6.1.4.1.3085.3.1.6.13.6.1 |
csOrionTunnelSwitchClientNameThis object identifies the client name of the originating tunnel. OCTET STRING .1.3.6.1.4.1.3085.3.1.6.13.6.1.1 |
csOrionTunnelSwitchModeThis object determines the switching action.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.13.6.1.2 |
csOrionTunnelSwitchRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.13.6.1.3 |
csOrionTunnelSwitchTargetTable. SEQUENCE OF CsOrionTunnelSwitchTargetEntry .1.3.6.1.4.1.3085.3.1.6.13.7 |
csOrionTunnelSwitchTargetEntry. CsOrionTunnelSwitchTargetEntry .1.3.6.1.4.1.3085.3.1.6.13.7.1 |
csOrionTunnelSwitchTargetIpAddressThis object identifies the IP address of the destination LNS. IpAddress .1.3.6.1.4.1.3085.3.1.6.13.7.1.1 |
csOrionTunnelSwitchTargetPriorityThis object determines the priority of this target address. Priority value 1 being the highest.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.7.1.2 |
csOrionTunnelSwitchTargetMaxSessionThis object determines the maximum number of sessions that can be handled by this target address.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.13.7.1.3 |
csOrionTunnelSwitchTargetSessionCountThis object keeps the count of the active sessions on this target address.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.7.1.4 |
csOrionTunnelSwitchTargetRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.13.7.1.5 |
csOrionL2tpStatsTableThe L2TP Status and Statistics table. SEQUENCE OF CsOrionL2tpStatsEntry .1.3.6.1.4.1.3085.3.1.6.13.8 |
csOrionL2tpStatsEntryAn L2TP Stats entry. An entry in this table may correspond to a single endpoint or a group of tunnel endpoints. CsOrionL2tpStatsEntry .1.3.6.1.4.1.3085.3.1.6.13.8.1 |
csOrionL2tpStatsTotalTunnelsThis object returns the total number of tunnels that have successfully reached the established state.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.1 |
csOrionL2tpStatsFailedTunnelsThis object returns the number of tunnels that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.2 |
csOrionL2tpStatsFailedAuthenticationsThis object returns the number of failed tunnel connection attempts because the tunnel peer failed authentication.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.3 |
csOrionL2tpStatsActiveTunnelsThis object returns the number of tunnels that are currently active.ro Gauge32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.4 |
csOrionL2tpStatsTotalSessionsThis object returns the total number of sessions that have successfully reached the established state.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.5 |
csOrionL2tpStatsFailedSessionsThis object returns the number of sessions that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.6 |
csOrionL2tpStatsActiveSessionsThis object returns the number of sessions that are currently active.ro Gauge32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.7 |
csOrionL2tpStatsDrainingTunnelsThis object indicates if this L2TP is draining off sessions from all tunnels. This object will return no(2) when the domain is not draining sessions or after the last L2TP session has disconnected when the domain is in the draining state.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.8.1.8 |
csOrionL2tpStatsControlRecvOctetsThis object returns the number of control channel octets received. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.9 |
csOrionL2tpStatsControlRecvPacketsThis object returns the number of control packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.10 |
csOrionL2tpStatsControlSendOctetsThis object returns the number of control channel octets that were transmitted to tunnel endpoints. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.11 |
csOrionL2tpStatsControlSendPacketsThis object returns the number of control packets that were transmitted to tunnel endpoints.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.12 |
csOrionL2tpStatsPayloadRecvOctetsThis object returns the number of payload channel octets that were received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.13 |
csOrionL2tpStatsPayloadRecvPacketsThis object returns the number of payload packets that were received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.14 |
csOrionL2tpStatsPayloadRecvDiscardsThis object returns the number of received payload packets that were discarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.15 |
csOrionL2tpStatsPayloadSendOctetsThis object returns the number of payload channel octets that were transmitted to tunnel peers. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.16 |
csOrionL2tpStatsPayloadSendPacketsThis object returns the number of payload packets that were transmitted to tunnel peers.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.8.1.17 |
csOrionL2tpTunnelStatsTableThe L2TP tunnel status and statistics table. SEQUENCE OF CsOrionL2tpTunnelStatsEntry .1.3.6.1.4.1.3085.3.1.6.13.9 |
csOrionL2tpTunnelStatsEntryAn L2TP tunnel interface stats entry. CsOrionL2tpTunnelStatsEntry .1.3.6.1.4.1.3085.3.1.6.13.9.1 |
csOrionL2tpTunnelStatsStateThis field contains the current state of the control tunnel.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.13.9.1.1 |
csOrionL2tpTunnelStatsTotalSessionsThis object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.9.1.2 |
csOrionL2tpTunnelStatsFailedSessionsThis object contains the total number of sessions that were initiated but failed to reach the established phase. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]ro Counter32 .1.3.6.1.4.1.3085.3.1.6.13.9.1.3 |
csOrionL2tpTunnelStatsActiveSessionsThis object contains the total number of sessions in the established state for this tunnel. NOTE : This is not currently supported. It will just return zero. [Alan 10/12/2000]ro Gauge32 .1.3.6.1.4.1.3085.3.1.6.13.9.1.4 |
csOrionL2tpInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.13.10 |
csOrionQosInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.14 |
csOrionDsByteFilterInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.14.1 |
csOrionVrDsByteFilterTableThis table specifies a set of acl's to be applied to packets received by (and sent from) this virtual router. The first entry whose acl matches a packet causes the DS Byte field of the packet to be set to the value specified in the table entry. If no entry's acl matches the packet, the DS Byte field of the packet will be set to the value specified in csOrionVPNVRouterIpDsByte. SEQUENCE OF CsOrionVrDsByteFilterEntry .1.3.6.1.4.1.3085.3.1.6.14.1.1 |
csOrionVrDsByteFilterEntryEach entry specifies whether packets satisfying a specific access list entry will have their DS Byte field set to the value indicated in the table entry. CsOrionVrDsByteFilterEntry .1.3.6.1.4.1.3085.3.1.6.14.1.1.1 |
csOrionVrDsByteFilterIndexThe Index of this particular Packet Filter. Integer32 .1.3.6.1.4.1.3085.3.1.6.14.1.1.1.1 |
csOrionVrDsByteFilterAclIdThe Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on any of the virtual interfaces on this virtual router that satisfy that access list entry are acted upon by this filter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.14.1.1.1.2 |
csOrionVrDsByteFilterActionThe action performed by this filter.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.1.1.1.3 |
csOrionVrDsByteFilterValueThis object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.14.1.1.1.4 |
csOrionVrDsByteFilterDirectionThe direction of packets on which this filter is applied.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.1.1.1.5 |
csOrionVrDsByteFilterRowStatusA row status type for this Table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.14.1.1.1.6 |
csOrionViDsByteFilterTableThis table specifies a set of acl's to be applied to packets received over (or sent out) each the interfaces belonging to this virtual router. The first entry whose acl matches a packet causes the DS Byte field of the packet to be set to the value specified in the table entry. If no entry's acl matches the packet, the DS Byte field of the packet will be set to the value specified in csOrionVPNVRouterIpDsByte. SEQUENCE OF CsOrionViDsByteFilterEntry .1.3.6.1.4.1.3085.3.1.6.14.1.2 |
csOrionViDsByteFilterEntryEach filter specifies whether packets satisfying a specific access list entry are permitted or denied to be passed along their route. CsOrionViDsByteFilterEntry .1.3.6.1.4.1.3085.3.1.6.14.1.2.1 |
csOrionViDsByteFilterIndexThe Index of this particular Packet Filter. Integer32 .1.3.6.1.4.1.3085.3.1.6.14.1.2.1.1 |
csOrionViDsByteFilterAclIdThe Id of an access list entry (from csOrionGenAclTable). All packets transmitted or received on this virtual interface that access list entry are acted upon by this filter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.14.1.2.1.2 |
csOrionViDsByteFilterActionThe action performed by this filter.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.1.2.1.3 |
csOrionViDsByteFilterValueThis object defines the values to be placed in the TypeOfService octet of each IP packet sent out or forwarded by the VR. The valid range covers both 7-bit configurations recommended in RFC 1349 (Precedence and TOS bits) and 6-bit configurations recommended in RFC 2474 (Differentiated Services). If the value selected is 256, the DsByte is not changed and packets are forwarded with their existing TypeOfService byte value.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.14.1.2.1.4 |
csOrionViDsByteFilterDirectionThe direction of packets on which this filter is applied.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.1.2.1.5 |
csOrionViDsByteFilterRowStatusA row status type for this Table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.14.1.2.1.6 |
csOrionDsByteFilterInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.14.1.3 |
csOrionExpFilterInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.14.2 |
csExpFilterTableThis table is used to filter MPLS EXP bits. SEQUENCE OF CsExpFilterEntry .1.3.6.1.4.1.3085.3.1.6.14.2.1 |
csExpFilterEntryAn entry in this table is used to set the attributes for a matching EXP bits for a inbound/outbound direction for a VR. CsExpFilterEntry .1.3.6.1.4.1.3085.3.1.6.14.2.1.1 |
csExpFilterDirectionThe direction to filter. Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.1.1.1 |
csExpFilterMatchingExpThe EXP value to filter. Integer32 .1.3.6.1.4.1.3085.3.1.6.14.2.1.1.2 |
csExpFilterExpValueThe EXP value to change to.rw Integer32 (-1..7) .1.3.6.1.4.1.3085.3.1.6.14.2.1.1.3 |
csExpFilterServiceCategoryThe service category to use.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.1.1.4 |
csExpFilterColorMeteringModeUsed to activate metering.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.1.1.5 |
csExpFilterDropPrecedenceUsed to specify the drop precedence to use.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.1.1.6 |
csExpFilterRowStatusA row status type for this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.14.2.1.1.7 |
csExpFilterTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.14.2.2 |
csExpFilterIfTableThis table is used to filter MPLS EXP bits. SEQUENCE OF CsExpFilterIfEntry .1.3.6.1.4.1.3085.3.1.6.14.2.3 |
csExpFilterIfEntryAn entry in this table is used to set the attributes for a matching EXP bits for a inbound/outbound direction for a CsExpFilterIfEntry .1.3.6.1.4.1.3085.3.1.6.14.2.3.1 |
csExpFilterIfDirectionThe direction to filter. Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.3.1.1 |
csExpFilterIfMatchingExpThe EXP value to filter. Integer32 .1.3.6.1.4.1.3085.3.1.6.14.2.3.1.2 |
csExpFilterIfExpValueThe EXP value to set to.rw Integer32 (-1..7) .1.3.6.1.4.1.3085.3.1.6.14.2.3.1.3 |
csExpFilterIfServiceCategoryUsed to assign service category.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.3.1.4 |
csExpFilterIfColorMeteringModeUsed to activate metering.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.3.1.5 |
csExpFilterIfDropPrecedenceUsed to assign drop precedence.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.14.2.3.1.6 |
csExpFilterIfRowStatusA row status type for this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.14.2.3.1.7 |
csOrionQosInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.14.3 |
csOrionDHCPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.15 |
csOrionDHCPRelayInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.15.1 |
csOrionVrDhcpRelayConfigTableThis table contains DHCP Relay Agent configuration parameters. SEQUENCE OF CsOrionVrDhcpRelayConfigEntry .1.3.6.1.4.1.3085.3.1.6.15.1.1 |
csOrionVrDhcpRelayConfigEntryEach entry represents the DHCP Relay configuration for a single VR. CsOrionVrDhcpRelayConfigEntry .1.3.6.1.4.1.3085.3.1.6.15.1.1.1 |
csOrionVrDhcpRelayMaxHopsThe upper limit for the 'hops' field of DHCP requests. Any request with a value exceeding this limit will be dropped by the relay agent.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.15.1.1.1.1 |
csOrionVrDhcpRelaySecsThresholdThe threshold, in seconds, for the 'time elapsed' field of DHCP requests. This value is used to prioritize clients across the relay agent. The agent forwards only those requests that have a 'time elapsed' field value equal to or greater than the value set for this paramter.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.15.1.1.1.2 |
csOrionVrDhcpRelayOperStatusThis object indicates the current operational status of the relay agent.ro OperStatus .1.3.6.1.4.1.3085.3.1.6.15.1.1.1.3 |
csOrionVrDhcpRelayAdminStatusThis object indicates the desired state of the DHCP relay agent. A relay agent, once enabled, requires at least one DHCP server address to forward packets to. If a list of servers has been configured, then all requests are forwarded to all servers -- no priority or precedence is applied.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.15.1.1.1.4 |
csOrionVrDhcpRelayServerTableThis table contains the IP addresses of a list of DHCP servers to which the relay can forward the requests. SEQUENCE OF CsOrionVrDhcpRelayServerEntry .1.3.6.1.4.1.3085.3.1.6.15.1.2 |
csOrionVrDhcpRelayServerEntryEach entry contains a information about a single DHCP server - an IP address, and, optionally, a name. CsOrionVrDhcpRelayServerEntry .1.3.6.1.4.1.3085.3.1.6.15.1.2.1 |
csOrionVrDhcpRelayServerAddressThe IP address of the DHCP server this entry corresponds to.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.15.1.2.1.1 |
csOrionVrDhcpRelayServerNameThe name of the the DHCP server this entry corresponds to.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.15.1.2.1.2 |
csOrionVrDhcpRelayServerRowStatusThe RowStatus object for this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.15.1.2.1.3 |
csOrionDhcpRelayStatsTableThis table contains various statistics pertaining to the DHCP Relay Agent. SEQUENCE OF CsOrionDhcpRelayStatsEntry .1.3.6.1.4.1.3085.3.1.6.15.1.3 |
csOrionDhcpRelayStatsEntryA Set of statistics for a single DHCP Relay Agent. CsOrionDhcpRelayStatsEntry .1.3.6.1.4.1.3085.3.1.6.15.1.3.1 |
csOrionDhcpRelayInReqsThe total number of DHCP Request packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.1 |
csOrionDhcpRelayInDiscsThe total number of DHCP Discover packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.2 |
csOrionDhcpRelayInRelsThe total number of DHCP Release packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.3 |
csOrionDhcpRelayInDecsThe total number of DHCP Decline packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.4 |
csOrionDhcpRelayInAcksThe tatal number of DHCP Ack packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.5 |
csOrionDhcpRelayInNaksThe total number of DHCP Nak packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.6 |
csOrionDhcpRelayInOffersThe total number of DHCP Offer packets received.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.7 |
csOrionDhcpRelayOutReqsThe total number of DHCP Request packets forwarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.8 |
csOrionDhcpRelayOutDiscsThe total number of DHCP Discover packets forwarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.9 |
csOrionDhcpRelayOutRelsThe total number of DHCP Release packets forwarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.10 |
csOrionDhcpRelayOutDecsThe total number of DHCP Decline packets forwarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.11 |
csOrionDhcpRelayOutAcksThe tatal number of DHCP Ack packets forwarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.12 |
csOrionDhcpRelayOutNaksThe total number of DHCP Nak packets forwarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.13 |
csOrionDhcpRelayOutOffersThe total number of DHCP Offer packets forwarded.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.15.1.3.1.14 |
csOrionDHCPInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.15.2 |
csOrionMlpppInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.16 |
csOrionMlpppBundleTableThis table contains information about PPP multilink bundles. SEQUENCE OF CsOrionMlpppBundleEntry .1.3.6.1.4.1.3085.3.1.6.16.1 |
csOrionMlpppBundleEntryEach entry represents a PPP multilink bundle. CsOrionMlpppBundleEntry .1.3.6.1.4.1.3085.3.1.6.16.1.1 |
csOrionMlpppBundleSlotThe slot on which this bundle is to be created. This value must be specified at creation and, henceforth, cannot be changed. Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.1 |
csOrionMlpppBundleIndexThe index associated with this PPP multilink bundle. Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.2 |
csOrionMlpppBundleMaxLinksThe maximum number of links that can be configured to be part of this PPP multilink bundle.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.3 |
csOrionMlpppBundleQueueSizeThe maximum size of this bundle's re-sequencing queue.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.4 |
csOrionMlpppBundleFragmentsPerPacketThe number of fragments per packet.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.5 |
csOrionMlpppBundleReorderTimeoutThe configured reorder timeout value for this bundle, expressed in milliseconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.6 |
csOrionMlpppBundleTxMRRUThe maximum receive reconstructed unit in the transmit direction.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.7 |
csOrionMlpppBundleRxMRRUThe maximum receive reconstructed unit in the receive direction.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.8 |
csOrionMlpppBundleEventLogLevelThe desired level of event logging for this bundle.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.16.1.1.9 |
csOrionMlpppBundleAdminStatusThe desired state of the bundle.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.16.1.1.10 |
csOrionMlpppBundleOperStatusThe actual of the bundle.ro OperStatus .1.3.6.1.4.1.3085.3.1.6.16.1.1.11 |
csOrionMlpppBundleRowStatusThis object is used to create and delete PPP multilink bundles.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.16.1.1.12 |
csOrionMlpppBundleActiveLinksThe number of active links in this bundle.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.13 |
csOrionMlpppBundlePacketsSentThe number of packets sent on this bundle.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.14 |
csOrionMlpppBundlePacketsReceivedThe number of packets received on this bundle.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.15 |
csOrionMlpppBundleBytesSentThe number of bytes sent on this bundle.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.16 |
csOrionMlpppBundleBytesReceivedThe number of bytes received on this bundle.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.16.1.1.17 |
csOrionMlpppBundleSiteNameA textual string containing the site name of this Mlppp Bundle interface.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.16.1.1.18 |
csOrionMlpppLinkTableThis table contains information about PPP multilink links. SEQUENCE OF CsOrionMlpppLinkEntry .1.3.6.1.4.1.3085.3.1.6.16.2 |
csOrionMlpppLinkEntryEach entry represents a PPP multilink link. CsOrionMlpppLinkEntry .1.3.6.1.4.1.3085.3.1.6.16.2.1 |
csOrionMlpppLinkSlotIndexThe slot of this PPP multilink link. Integer32 .1.3.6.1.4.1.3085.3.1.6.16.2.1.1 |
csOrionMlpppLinkPortIndexThe port of this PPP multilink link. Integer32 .1.3.6.1.4.1.3085.3.1.6.16.2.1.2 |
csOrionMlpppLinkChannelIndexChannel number of this link. Integer32 .1.3.6.1.4.1.3085.3.1.6.16.2.1.3 |
csOrionMlpppLinkSubIfIndexThe sub-interface number of this link. Integer32 .1.3.6.1.4.1.3085.3.1.6.16.2.1.4 |
csOrionMlpppLinkRowStatusThis object is used to add and remove PPP multilink links from a bundle.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.16.2.1.5 |
csOrionMlpppInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.16.3 |
csOrionPppoeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.17 |
csPppoeAcConfig OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.17.1 |
csPppoeAcIfConfigTablePPPoE Access Concentrators in given sub-interface (of ATM or FR). SEQUENCE OF CsPppoeAcIfConfigEntry .1.3.6.1.4.1.3085.3.1.6.17.1.1 |
csPppoeAcIfConfigEntryThis list contains PPPoE Access Concentrator Servers. CsPppoeAcIfConfigEntry .1.3.6.1.4.1.3085.3.1.6.17.1.1.1 |
csPppoeAcIfSlotIndexThis object identifies the blade to which this instance of AC is created. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.1 |
csPppoeAcIfModuleIndexThis object identifies the module of the blade to which this instance of AC is created. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.2 |
csPppoeAcIfPortIndexThis object identifies the port in the blade csPppoeAcIfSlotIndex to which this instance of AC is created. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.3 |
csPppoeAcIfChannelIndexThis object identifies the channel number. Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.4 |
csPppoeAcIfSubIfIndexThis object identifies the sub-if number. Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.5 |
csPppoeAcIfConfigMaxSessionsMaximum sesions that it can accepted on this AC.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.6 |
csPppoeAcIfConfigMaxSessionsPerHostMaximum number of sessions that this AC can accept from a given host.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.7 |
csPppoeAcIfConfigTotalSessionsTotal Number of sessions established with this AC subjecting to maximum of csPppoeAcIfConfigMaxSessions.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.8 |
csPppoeAcIfConfigTotalActiveSessionsTotal Number of active sessions in this AC.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.9 |
csPppoeAcIfConfigPortEthernetAddressThis object conatins the MAC Address of this PPPoE AC.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.10 |
csPppoeAcIfConfigVolunteerServiceAdvertisingIf this object contains 'enable' then it advertise service profiles in PADO packetsrw Enumeration .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.11 |
csPppoeAcIfConfigNameThis object conatins the name of this PPPoE AC.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.12 |
csPppoeAcIfConfigAdminStatusThis object is used to enable or disable this PPPoE AC.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.13 |
csPppoeAcIfConfigOperStatusThis object contains operational status of PPPoE AC. This object value depends on operational status of corresponding underneath interface.ro OperStatus .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.14 |
csPppoeAcIfConfigServiceTemplateProfileThis object contains service template, a list of connection profiles, serves the purpose of service name concept in PPPOE AC.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.15 |
csPppoeConfigPppIfAuthThe type of authentication used by PPP over pppoe sessions on this PPPoE AC server.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.16 |
csPppoeConfigPppIfEchoTimeoutThe echo timeout (keepalive) in seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.17 |
csPppoeAcIfConfigEvLogLevelThis object is used to set the level for details for event logs for PPPoE AC. Events with level higher than this object will not be logged.rw EvLogLevel .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.18 |
csPppoeAcIfConfigEvLogAreaThis object is used to set the area of event logs for ATM Port. This value will not be applied to VCCs. Events which area is not specified in this object will not be logged.rw EvLogArea .1.3.6.1.4.1.3085.3.1.6.17.1.1.1.19 |
csPppoeAcIfConfigTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.17.1.2 |
csPppoeSession OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.17.2 |
csPppoeSessionTableThis is the list of all PPPoE sessions in a given PPPoE Access Concentrator Server. SEQUENCE OF CsPppoeSessionEntry .1.3.6.1.4.1.3085.3.1.6.17.2.1 |
csPppoeSessionEntryThis list contains PPPoE Sessions in a given Access Concentrator Server. CsPppoeSessionEntry .1.3.6.1.4.1.3085.3.1.6.17.2.1.1 |
csPppoeSessionUserNameThis object contains the user name for this session.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.1 |
csPppoeSessionIdThis object contains the session identifier for this session as assigned by the PPPoE AC in the PADS message. Integer32 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.2 |
csPppoeSessionOperStatusThis object contains the operational status for this session.ro OperStatus .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.3 |
csPppoeSessionPeerAddressThis object contains the MAC address for this session peer.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.4 |
csPppoeSessionServiceNameThis object contains the service name for which this session is established.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.5 |
csPppoeSessionDurationThis object contains the duration for this session since its establishment.ro Integer32 -- need to decide, but print format should be like -- hh:mm:ss .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.6 |
csPppoeSessionIPPoolNameInUseThis object contains the IP Address Pool Name which is used to dynamically allocate IP Addresses.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.7 |
csPppoeSessionServiceVPNThis object contains the VPN number in which this PPPoE-Session is being served.ro Integer32 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.8 |
csPppoeSessionServiceVRThis object contains the VR Identifier in which this PPPoE Session is Served.ro IpAddress .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.9 |
csPppoeSessionReceivedPktsThis object contains the number of session packets received by this PPPoE Session.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.10 |
csPppoeSessionReceivedOctetsThis object contains the number of session octets received by this PPPoE Session.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.11 |
csPppoeSessionTranmittedPktsThis object contains the number of session packets transmitted by this PPPoE Session.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.12 |
csPppoeSessionTransmittedOctetsThis object contains the number of session octets transmitted by this PPPoE Session.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.13 |
csPppoeSessionReceiveOperDownThis object contains the number of session packets received by this PPPoE Session from its peer while its operational status is down.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.14 |
csPppoeSessionTransmitOperDownThis object contains the number of session packets received for to transmit to peer by this PPPoE Session.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.15 |
csPppoeSessionReceivedErrorsThis object contains the number of session packets received and having protocol header errors.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.16 |
csPppoeSessionRowStatusThe row status for this table. Used only for deleting this session. IMPORTANT: (1) entries on this table are created when a session is established. Therefore, creation of entry thru SNMP SET Request is not allowed. (2) session is usually torn down by the peer.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.17.2.1.1.17 |
csPppoeSessionTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.17.2.2 |
csPppoeStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.17.3 |
csPppoeAcIfStatTableThe PPPoE Access Concentrators statistics counter table. SEQUENCE OF CsPppoeAcIfStatEntry .1.3.6.1.4.1.3085.3.1.6.17.3.1 |
csPppoeAcIfStatEntryA set of statistics for a single PPPoE Access Concentrator. CsPppoeAcIfStatEntry .1.3.6.1.4.1.3085.3.1.6.17.3.1.1 |
csPppoeAcIfStatPADIReceiveThis object contains the number of PADI received by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.1 |
csPppoeAcIfStatPADIRejectThis object contains the number of PADI discarded by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.2 |
csPppoeAcIfStatPADRReceiveThis object contains the number of PADR received by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.3 |
csPppoeAcIfStatPADRRejectThis object contains the number of PADR discarded by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.4 |
csPppoeAcIfStatPADOTransmitThis object contains the number of PADO transmitted by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.5 |
csPppoeAcIfStatPADSTransmitThis object contains the number of PADS transmitted by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.6 |
csPppoeAcIfStatPADTReceiveThis object contains the number of PADT received by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.7 |
csPppoeAcIfStatPADTTransmitThis object contains the number of PADT transmitted by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.8 |
csPppoeAcIfStatGenericErrorReceiveThis object contains the number of PPPoE Generic-Error tags received by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.9 |
csPppoeAcIfStatGenericErrorTransmitThis object contains the number of PPPoE Generic-Error tags transmitted by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.10 |
csPppoeAcIfStatMalformedPktsThis object contains the number of malformed packets received by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.11 |
csPppoeAcIfStatServiceNameErrorsThis object contains the number of PPPoE Service-Name-Error tags received/transmitted by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.12 |
csPppoeAcIfStatACSystemErrorsThis object contains the number of PPPoE AC-System-Error tags received/transmitted by this PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.13 |
csPppoeAcIfStatPppAuthFailsThis object contains the number of PPP authentication failures for sessions created on PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.14 |
csPppoeAcIfStatAccessVRFailsThis object contains the number of failures while contacting Access VR for service names on PPPoE AC.ro Counter64 .1.3.6.1.4.1.3085.3.1.6.17.3.1.1.15 |
csOrionPpoeInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.17.4 |
csOrionServiceSelectionInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.18 |
csOrionVrIfManagerTable SEQUENCE OF CsOrionVrIfManagerEntry .1.3.6.1.4.1.3085.3.1.6.18.1 |
csOrionVrIfManagerEntry CsOrionVrIfManagerEntry .1.3.6.1.4.1.3085.3.1.6.18.1.1 |
csOrionVrIfManagerSlotIndexThis object identifies the slot ID. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.18.1.1.1 |
csOrionVrIfManagerModuleIndexThis object identifies the module ID. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.18.1.1.2 |
csOrionVrIfManagerPortIndexThis object identifies the port ID. Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.18.1.1.3 |
csOrionVrIfManagerChannelIndexThis object identifies the channel ID. Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.18.1.1.4 |
csOrionVrIfManagerSubifIndexThis object identifies the subif ID. Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.18.1.1.5 |
csOrionVrIfManagerRowStatusThe row status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.18.1.1.6 |
csOrionConnectionProfileTableThis table contains a list of connection profiles. SEQUENCE OF CsOrionConnectionProfileEntry .1.3.6.1.4.1.3085.3.1.6.18.2 |
csOrionConnectionProfileEntryThis entry represents a single connection profile. CsOrionConnectionProfileEntry .1.3.6.1.4.1.3085.3.1.6.18.2.1 |
csOrionConnectionProfileNameThe name of this connection profile. LongDisplayString .1.3.6.1.4.1.3085.3.1.6.18.2.1.1 |
csOrionConnectionProfileVpnIdThe VPN Id this profile applies to.rw Integer32 (0.. 2147483647) .1.3.6.1.4.1.3085.3.1.6.18.2.1.2 |
csOrionConnectionProfileVrIdThe VR Id this profile applies to.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.18.2.1.3 |
csOrionConnectionProfileAddrPoolnameThe local IP address poolname in the VR.rw LongDisplayString .1.3.6.1.4.1.3085.3.1.6.18.2.1.4 |
csOrionConnectionProfileLnsAddressThe LNS IP address this profile applies to.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.18.2.1.5 |
csOrionConnectionProfileRowStatusThe row status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.18.2.1.6 |
csOrionServiceTemplateTableThis table contains a list of names of service selections. Each of this entry will hold a list of connection profiles. Refer to expansion table csOrionServiceTemplateConnProfileTable. SEQUENCE OF CsOrionServiceTemplateEntry .1.3.6.1.4.1.3085.3.1.6.18.3 |
csOrionServiceTemplateEntryThis entry represents a single service selection. CsOrionServiceTemplateEntry .1.3.6.1.4.1.3085.3.1.6.18.3.2 |
csOrionServiceTemplateNameThe service selection template name. LongDisplayString .1.3.6.1.4.1.3085.3.1.6.18.3.2.1 |
csOrionServiceTemplateRowStatusThe row status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.18.3.2.2 |
csOrionServiceTemplateConnProfileTableThis table contains a list of connection profiles contained in a single service selection template. SEQUENCE OF CsOrionServiceTemplateConnProfileEntry .1.3.6.1.4.1.3085.3.1.6.18.4 |
csOrionServiceTemplateConnProfileEntryThis entry represents a single connection profile on a service selection. CsOrionServiceTemplateConnProfileEntry .1.3.6.1.4.1.3085.3.1.6.18.4.2 |
csOrionServiceTemplateConnProfileNameThe name of the connection profile to be added in the table. NOTE: Must be an existing csOrionConnectionProfileName. LongDisplayString .1.3.6.1.4.1.3085.3.1.6.18.4.2.1 |
csOrionServiceTemplateConnProfileRowStatusThe row status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.18.4.2.2 |
csOrionServiceSelectionInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.18.5 |
csOrionNBNSInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.19 |
csOrionVrNbnsConfigTableThis table contains NBNS configuration parameters. SEQUENCE OF CsOrionVrNbnsConfigEntry .1.3.6.1.4.1.3085.3.1.6.19.1 |
csOrionVrNbnsConfigEntryEach entry represents the NBNS configuration parameters for a single VR. CsOrionVrNbnsConfigEntry .1.3.6.1.4.1.3085.3.1.6.19.1.1 |
csOrionVrPrimaryNbnsServerThe primary NBNS server for this VR.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.19.1.1.1 |
csOrionVrSecondaryNbnsServerThe secondary NBNS server for this VR.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.19.1.1.2 |
csOrionNBNSInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.19.2 |
csOrionSpfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.20 |
csOrionVrSpfConfTableThis table contains SPF configuration parameters. SEQUENCE OF CsOrionVrSpfConfEntry .1.3.6.1.4.1.3085.3.1.6.20.1 |
csOrionVrSpfConfEntryThis table specifies a set of configurable parameters for the SPF module within each VR. CsOrionVrSpfConfEntry .1.3.6.1.4.1.3085.3.1.6.20.1.1 |
csOrionVrSpfConnTblSizeThis Size puts an upper limit on the total number of sessions (inclusive of TCP and UDP) that this VR will accept, connections beyond this number will be dropped.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.1 |
csOrionVrSpfTcpInitTblSizeThis Size puts an upper limit on the number of TCP sessions that can remain in the SYN state at any given time, this limits the ability to accept new TCP connections simultaneously.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.2 |
csOrionVrSpfUdpInitTblSizeThis Size puts an upper limit on the number of UDP sessions that can remain in the unmatched state at any given time, this limits the ability to accept new UDP connections simultaneously.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.3 |
csOrionVrSpfTcpSeqCheckIf enabled, the tcp packets will be checked for validity of sequence number, this is done at init time, established state and close time.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.20.1.1.4 |
csOrionVrSpfTcpInitTimeoutThis time out value decides how long a TCP session can remain in SYN state without the session establishment process reaching completion, the session is deleted after the expiry of this period.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.5 |
csOrionVrSpfTcpIdleTimeoutThis timeout value decides how long a TCP session can hang around without any activity(or Idle), such entries are deleted after the expiry of this period and end peers reset.rw Integer32 (-1..64800) .1.3.6.1.4.1.3085.3.1.6.20.1.1.6 |
csOrionVrSpfTcpCloseTimeoutThis decides the lifetime of the TIME_WAIT state in the TCP session closure sequence.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.7 |
csOrionVrSpfUdpIdleTimeoutThis is the Idle timeout period for UDp sessions.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.8 |
csOrionVrSpfIcmpIdleTimeoutThis is the idle timeout period for ICMP sessions.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.9 |
csOrionVrSpfTcpCurrentConnTableEntriesThis is the number of TCP sessions in the Connection Table right now.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.10 |
csOrionVrSpfUdpCurrentConnTableEntriesThis is the number of UDP sessions in the Connection Table right now.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.11 |
csOrionVrSpfIcmpCurrentConnTableEntriesThis is the number of ICMP sessions in the Connection Table right now.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.12 |
csOrionVrSpfTcpTotalConnTableEntriesThis is the total number of TCP sessions seen by the Connection Table.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.13 |
csOrionVrSpfUdpTotalConnTableEntriesThis is the total number of UDP sessions seen by the Connection Table.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.14 |
csOrionVrSpfIcmpTotalConnTableEntriesThis is the total number of ICMP sessions seen by the Connection Table.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.15 |
csOrionVrSpfTcpSynTableEntriesThis is the total number of TCP SYN sessions in the TCP Initialization Table.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.16 |
csOrionVrSpfUdpUnmatchedTableEntriesThis is the total number of UDP sessions in the UDP Initialization Table.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.17 |
csOrionVrSpfCleanTablesFlagThis is a flag to tell SPF to remove all entries fom the tables.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.20.1.1.18 |
csOrionSpfInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.20.2 |
csOrionAAAServiceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.21 |
csOrionAAAServerConfigTableThis table contains AAA server configuration parameters. SEQUENCE OF CsOrionAAAServerConfigEntry .1.3.6.1.4.1.3085.3.1.6.21.1 |
csOrionAAAServerConfigEntryEach entry represents the configuration parameters for a single AAA server in this VR. CsOrionAAAServerConfigEntry .1.3.6.1.4.1.3085.3.1.6.21.1.1 |
csOrionAAAServerTypeThe type of AAA server. Enumeration .1.3.6.1.4.1.3085.3.1.6.21.1.1.1 |
csOrionAAAServerNameName given for this AAA server. Name has to be unique regardless of csOrionAAAServerType. DisplayString .1.3.6.1.4.1.3085.3.1.6.21.1.1.2 |
csOrionAAAServerIpAddressIP Address for this server.rw IpAddress .1.3.6.1.4.1.3085.3.1.6.21.1.1.3 |
csOrionAAAServerPortPort on which this AAA server is listening for messages. Radius client uses the default port 1812 for AA requests. Ldap client uses the default port 389 for AA requests. For rows where csAAAServerType is local, this object has no meaning.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.21.1.1.4 |
csOrionAAAServerRetransmitThe number of times a AAA Server will be queried before moving to the next AAA Server in the list identified by csOrionAAAServerList. This object cannot be set for LDAP server, which is subject to TCP retransmission constraint and cannot be modified. TCP retries 12 times; the first timeout is 1.5 seconds, the subsequent retry timeout is twice as the previous one but no more than 64 seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.21.1.1.5 |
csOrionAAAServerTimeoutThe amount of time (in seconds) to wait for a response from this AAA Server before timing out. This object cannot be set for LDAP server, which is subject to TCP timeout constraint and cannot be modified. TCP retries 12 times; the first timeout is 1.5 seconds, the subsequent retry timeout is twice as the previous one but no more than 64 seconds.rw Integer32 .1.3.6.1.4.1.3085.3.1.6.21.1.1.6 |
csOrionAAAServerRadiusKeyThe authentication and encryption key shared between the Radius client and this Radius Server. Applicable only if the server is of radius type.rw OCTET STRING .1.3.6.1.4.1.3085.3.1.6.21.1.1.7 |
csOrionAAAServerLdapUsernameDistinguished Name of the LDAP user. Applicable only if the server is of ldap type.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.21.1.1.8 |
csOrionAAAServerLdapPasswordPassword of the LDAP user. Applicable only if the server is of ldap type.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.21.1.1.9 |
csOrionAAAServerLdapSearchBaseStarting point in the directory hierarchy to perform search operations. Applicable only if the server is of ldap type.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.21.1.1.10 |
csOrionAAAServerLdapSearchFilterA filter that defines the conditions that must be fulfilled in order for the search to match a given entry. This must conform to RFC 2254 LDAP Search Filter String Representation. Applicable only if the server is of ldap type.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.21.1.1.11 |
csOrionAAAServerRowStatusUsed to create a row (createAndGo) or destroy a row. Once the row is created, get on this object will always yield active(1).rw Enumeration .1.3.6.1.4.1.3085.3.1.6.21.1.1.12 |
csOrionAAAServerConfigTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.21.2 |
csOrionAAAServerListConfigTableThis table contains AAA server list configuration parameters. An AAA server list is a prioritized collection of AAA servers as defined in csOrionAAAServerConfigTable. SEQUENCE OF CsOrionAAAServerListConfigEntry .1.3.6.1.4.1.3085.3.1.6.21.3 |
csOrionAAAServerListConfigEntryEach entry points to a single AAA server as defined in csOrionAAAServerConfigTable. This server has a unique priority within the list. CsOrionAAAServerListConfigEntry .1.3.6.1.4.1.3085.3.1.6.21.3.1 |
csOrionAAAServerListTypeThis object defines the kind of AAA servers that are contained in this list. If this object has a value of authentication(1), then all servers in this list are to be used for authentication purposes. If the server is of radius type, then it is also used for authorization. If this object has a value of authorization(2), then all servers in this list are to be used for authorization purposes. Note that only ldap servers can be added to this list. If this object has a value of accounting(4), then all servers in this list are to be used for accounting purposes. Note that only radius servers can be added to this list. Enumeration .1.3.6.1.4.1.3085.3.1.6.21.3.1.1 |
csOrionAAAServerListNameThe name given to the collection of AAA servers. An application refers to this name when specifying which group of servers to use for AAA purposes. This object has to be set during creation. DisplayString .1.3.6.1.4.1.3085.3.1.6.21.3.1.2 |
csOrionAAAServerListPriorityThe relative priority of the server in this list. Lower number means higher priority. Integer32 .1.3.6.1.4.1.3085.3.1.6.21.3.1.3 |
csOrionAAAServerListSvrNameThe name of the AAA server as defined in csOrionAAAServerConfigTable. A value of 'local' for this object means that the authentication is done locally.rw DisplayString .1.3.6.1.4.1.3085.3.1.6.21.3.1.4 |
csOrionAAAServerListSvrTypeThe type of AAA server. undefined(-1) means the corresponding AAA server is not yet defined, i.e., no entry in csOrionAAAServerConfigTable with a name as defined in csOrionAAAServerListSvrName. local(3) means that authentication is to be done locally.ro Enumeration .1.3.6.1.4.1.3085.3.1.6.21.3.1.5 |
csOrionAAAServerListRowStatusUsed to create a row (createAndGo) or destroy a row. When setting this object to createAndGo, csOrionAAAServerListSvrName must also be set. Once the row is created, get on this object will always yield active(1).rw Enumeration .1.3.6.1.4.1.3085.3.1.6.21.3.1.6 |
csOrionAAAServerListConfigTableEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.21.4 |
csOrionAAAServerListAdminTableThis table contains a RowStatus object to destroy an AAA server list defined in csOrionAAAServerListConfigTable. This provides a quick way to destroy the list without having to destroy each csOrionAAAServerListConfigEntry. SEQUENCE OF CsOrionAAAServerListAdminEntry .1.3.6.1.4.1.3085.3.1.6.21.5 |
csOrionAAAServerListAdminEntryEach entry represents an AAA server list. CsOrionAAAServerListAdminEntry .1.3.6.1.4.1.3085.3.1.6.21.5.1 |
csOrionAAAServerListAdminRowStatusSetting this object to destroy(6) will destroy the whole AAA service list with {type, name} specified in {csOrionAAAServerListConfigType, csOrionAAAServerListConfigName}.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.21.5.1.1 |
csOrionAAAServiceInfoEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.21.6 |
csOrionMeter OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.6.22 |
csOrionQoSMeterProfileTableThis table specifies the template of the metering control block. This template can be applied to any of the metering contexts under QoS of VR and VI SEQUENCE OF CsOrionQoSMeterProfileEntry .1.3.6.1.4.1.3085.3.1.6.22.1 |
csOrionQoSMeterProfileEntryEach entry specifies unique Metering profile CsOrionQoSMeterProfileEntry .1.3.6.1.4.1.3085.3.1.6.22.1.1 |
csOrionQoSMeterProfileNameThe Index of this table. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.1.1.1 |
csOrionQoSMeterProfileCBSCommitted Burst Sizerw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.22.1.1.2 |
csOrionQoSMeterProfilePBSPeak Burst Sizerw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.22.1.1.3 |
csOrionQoSMeterProfileCIRCommitted Information Raterw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.22.1.1.4 |
csOrionQoSMeterProfileMIRMaximum Information Raterw Integer32 (0..'7fffffff'h) .1.3.6.1.4.1.3085.3.1.6.22.1.1.5 |
csOrionQoSMeterProfileDropPrecedenceDrop option. If set to 'red' it will drop incoming red packets belonging to this ACL group. If set to 'redYellow' it will drop both red and yellow packets.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.22.1.1.6 |
csOrionQoSMeterProfileColorModeColor marker metering mode.rw Enumeration .1.3.6.1.4.1.3085.3.1.6.22.1.1.7 |
csOrionQoSMeterProfileStatusCreates or deletes the profilerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.1.1.8 |
csOrionQoSMeterTableThis table specifies the metering control block for each of the traffic flows SEQUENCE OF CsOrionQoSMeterEntry .1.3.6.1.4.1.3085.3.1.6.22.2 |
csOrionQoSMeterEntryMetering context entries CsOrionQoSMeterEntry .1.3.6.1.4.1.3085.3.1.6.22.2.1 |
csOrionQoSMeterNameName of the metering control block(MCB) - index to this table DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.2.1.1 |
csOrionQoSMeterProfileName of the metering profile to be applied to this MCBrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.2.1.2 |
csOrionQoSMeterTotalPacketsTotal number of packets metered for this flowro Counter32 .1.3.6.1.4.1.3085.3.1.6.22.2.1.3 |
csOrionQoSMeterRedByteCountNumber of red bytes on this flow.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.22.2.1.4 |
csOrionQoSMeterYellowByteCountNumber of yellow bytes on this flow.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.22.2.1.5 |
csOrionQoSMeterGreenByteCountNumber of green bytes on this flow.ro Counter32 .1.3.6.1.4.1.3085.3.1.6.22.2.1.6 |
csOrionQoSMeterAclListACLs that are associated with the metering control blockro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.2.1.7 |
csOrionQoSMeterStatusCreates or deletes the profilerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.2.1.8 |
csOrionVrQoSFilterTableThis table specifies the metering control block for each of the traffic flows SEQUENCE OF CsOrionVrQoSFilterEntry .1.3.6.1.4.1.3085.3.1.6.22.3 |
csOrionVrQoSFilterEntryMetering context entries CsOrionVrQoSFilterEntry .1.3.6.1.4.1.3085.3.1.6.22.3.1 |
csOrionVrQoSFilterIndexindex to this table. Integer32 .1.3.6.1.4.1.3085.3.1.6.22.3.1.1 |
csOrionVrQoSFilterAclIdThe ACL id is the index to this table. Prior to using this, the ACL with index equal to this object value must be created Integer32 .1.3.6.1.4.1.3085.3.1.6.22.3.1.2 |
csOrionVrQoSFilterMeterNameThis specifies which of the metering profile(template) to apply to this metering blockrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.3.1.3 |
csOrionVrQoSFilterServiceCategoryPriority with which the traffic is sent outrw Enumeration .1.3.6.1.4.1.3085.3.1.6.22.3.1.4 |
csOrionVrQoSFilterStatusCreates or deletes the profilerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.3.1.5 |
csOrionViQoSFilterTableThis table specifies the metering control block for each of the traffic flows SEQUENCE OF CsOrionViQoSFilterEntry .1.3.6.1.4.1.3085.3.1.6.22.4 |
csOrionViQoSFilterEntryMetering context entries CsOrionViQoSFilterEntry .1.3.6.1.4.1.3085.3.1.6.22.4.1 |
csOrionViQoSFilterIndexindex to this table. Integer32 .1.3.6.1.4.1.3085.3.1.6.22.4.1.1 |
csOrionViQoSFilterAclIdThe ACL id is the index to this table. Prior to using this, the ACL with index equal to this object value must be created Integer32 .1.3.6.1.4.1.3085.3.1.6.22.4.1.2 |
csOrionViQoSFilterMeterNameThis specifies which of the metering profile(template) to apply to this metering blockrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.4.1.3 |
csOrionViQoSFilterServiceCategoryPriority with which the traffic is sent outrw Enumeration .1.3.6.1.4.1.3085.3.1.6.22.4.1.4 |
csOrionViQoSFilterStatusCreates or deletes the profilerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.6.22.4.1.5 |
csOrionMeterEndEnd of this group. value undefinedro Integer32 .1.3.6.1.4.1.3085.3.1.6.22.5 |
csOrionHWControlInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.7 |
csOrionPowerSupplyTableA table for power supplies. SEQUENCE OF CsOrionPowerSupplyEntry .1.3.6.1.4.1.3085.3.1.7.1 |
csOrionPowerSupplyEntryAn entry containing power supply state information. CsOrionPowerSupplyEntry .1.3.6.1.4.1.3085.3.1.7.1.1 |
csOrionPowerSupplyIndexAn index for a power supply table.ro Integer32 .1.3.6.1.4.1.3085.3.1.7.1.1.1 |
csOrionPowerSupplyInputPowerStateA power supply's input power state. Enumeration .1.3.6.1.4.1.3085.3.1.7.1.1.2 |
csOrionPowerSupplyOutputPowerStateA power supply's output power state. Enumeration .1.3.6.1.4.1.3085.3.1.7.1.1.3 |
csOrionFanTableA table for fans. SEQUENCE OF CsOrionFanEntry .1.3.6.1.4.1.3085.3.1.7.2 |
csOrionFanEntryAn entry containing management information applicable to fans. CsOrionFanEntry .1.3.6.1.4.1.3085.3.1.7.2.1 |
csOrionFanIndexAn index for a fan table.ro Integer32 .1.3.6.1.4.1.3085.3.1.7.2.1.1 |
csOrionFanStateA fan operational state. Enumeration .1.3.6.1.4.1.3085.3.1.7.2.1.2 |
csOrionFanSpeedA fan speed (in RPS: Revolutions Per Second).ro Gauge32 .1.3.6.1.4.1.3085.3.1.7.2.1.3 |
csOrionPowerSupplyControlInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.7.3 |
csOrionPowerSupplyHWRevisionThe hardward revision information of the power supply controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.3.1 |
csOrionPowerSupplyFWMajorRevisionThe major firmware revision information of the power supply controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.3.2 |
csOrionPowerSupplyFWMinorRevisionThe minor firmware revision information of the power supply controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.3.3 |
csOrionPowerSupplyFWReleaseThe firmware release of the power supply controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.3.4 |
csOrionPowerSupplyFWReleaseDateA textual string containing information about the date of the firmware release. DisplayString .1.3.6.1.4.1.3085.3.1.7.3.5 |
csOrionPowerSupplyEventTrapGenerationThis object is used to enable/disable the generation of events and traps of the power supply.rw Enumeration .1.3.6.1.4.1.3085.3.1.7.3.6 |
csOrionFanTempSensorTableA table for fans. SEQUENCE OF CsOrionFanTempSensorEntry .1.3.6.1.4.1.3085.3.1.7.4 |
csOrionFanTempSensorEntryAn entry containing management information applicable to fans. CsOrionFanTempSensorEntry .1.3.6.1.4.1.3085.3.1.7.4.1 |
csOrionFanTempSensorStatethe temperature sensor's operational status of a fan. Enumeration .1.3.6.1.4.1.3085.3.1.7.4.1.1 |
csOrionFanTempSensorTemperatureA temperature (in Fahrenheit or Celsius) of the Fan. Integer32 (-67..257) .1.3.6.1.4.1.3085.3.1.7.4.1.2 |
csOrionFanTrayControlTableThere is a controller for each of the fan tray. This table contains entries of the hardware and firmware revision information and entries used to enable/disable the event/trap generation. SEQUENCE OF CsOrionFanTrayControlEntry .1.3.6.1.4.1.3085.3.1.7.5 |
csOrionFanTrayControlEntryAn entry containing PIC H/W and F/W Revision information applicable to fan tray controllers. CsOrionFanTrayControlEntry .1.3.6.1.4.1.3085.3.1.7.5.1 |
csOrionFanTrayIdentifies the upper or lower fan tray.ro Enumeration .1.3.6.1.4.1.3085.3.1.7.5.1.1 |
csOrionFanTrayHWRevisionFan tray's hardward Revision informationro DisplayString .1.3.6.1.4.1.3085.3.1.7.5.1.2 |
csOrionFanTrayFWMajorRevisionFan tray's firmware major Revision information.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.5.1.3 |
csOrionFanTrayFWMinorRevisionFan tray's firmware minor Revision information.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.5.1.4 |
csOrionFanTrayFWReleaseThe firmware release of the fan tray controller.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.5.1.5 |
csOrionFanTrayFWReleaseDateA textual string containing information about the date of the firmware release.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.5.1.6 |
csOrionFanTrayEventTrapGenerationFan tray's firmware minor Revision information.rw Enumeration .1.3.6.1.4.1.3085.3.1.7.5.1.7 |
csOrionStatusPanelControlInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.7.6 |
csOrionStatusPanelHWRevisionThe hardward revision information of the status panel controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.6.1 |
csOrionStatusPanelFWMajorRevisionThe major firmware revision information of the status panel controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.6.2 |
csOrionStatusPanelFWMinorRevisionThe minor firmware revision information of the status panel controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.6.3 |
csOrionStatusPanelFWReleaseThe firmware release of the power supply controller. DisplayString .1.3.6.1.4.1.3085.3.1.7.6.4 |
csOrionStatusPanelFWReleaseDateA textual string containing information about the date of the firmware release. DisplayString .1.3.6.1.4.1.3085.3.1.7.6.5 |
csOrionTemperatureAirFlowCardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.7.7 |
csOrionTempAirFlowCardTableA table for temperature air flow card. SEQUENCE OF CsOrionTempAirFlowCardEntry .1.3.6.1.4.1.3085.3.1.7.7.1 |
csOrionTempAirFlowCardEntryAn entry containing management information applicable to temperature air flow card. CsOrionTempAirFlowCardEntry .1.3.6.1.4.1.3085.3.1.7.7.1.1 |
csOrionAirFlowCardIndexIdentifies the temperature air flow card. Enumeration .1.3.6.1.4.1.3085.3.1.7.7.1.1.1 |
csOrionAirFlowCardHWRevisionThe air flow card's hardward Revision information.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.7.1.1.2 |
csOrionAirFlowCardFWMajorRevisionThe air flow card's firmwar major Revision information.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.7.1.1.3 |
csOrionAirFlowCardFWMinorRevisionThe air flow card's firmware minor Revision information.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.7.1.1.4 |
csOrionAirFlowCardFWReleaseThe air flow card's firmware release information.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.7.1.1.5 |
csOrionAirFlowCardFWReleaseDateA textual string containing information about the date of the firmwre release.ro DisplayString .1.3.6.1.4.1.3085.3.1.7.7.1.1.6 |
csOrionAirFlowCardTemperatureThe air flow card's temperature.ro Integer32 (-67..257) .1.3.6.1.4.1.3085.3.1.7.7.1.1.7 |
csOrionAirFlowCardTempStateAn inlet air flow temperature sensor operational state.ro Enumeration .1.3.6.1.4.1.3085.3.1.7.7.1.1.8 |
csOrionAirFlowCardEventTrapGenerationThe air flow card's trap/event generation status.rw Enumeration .1.3.6.1.4.1.3085.3.1.7.7.1.1.9 |
csOrionBackplaneInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.8 |
csOrionBackplaneUtilizationA % of utilization for backplane.ro Gauge32 .1.3.6.1.4.1.3085.3.1.8.1 |
csOrionSnmpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.9 |
csOrionGenSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.9.1 |
csOrionSnmpGenTableThis table controls the activation of the snmp agent on a particular Virtual Router. Note, only one agent instance can be enabled at a time. SEQUENCE OF CsOrionSnmpGenEntry .1.3.6.1.4.1.3085.3.1.9.1.1 |
csOrionSnmpGenEntryEach entry represents a single Virtual Router. CsOrionSnmpGenEntry .1.3.6.1.4.1.3085.3.1.9.1.1.1 |
csOrionSnmpGenStatusThis object is used to enable/disable the snmp server on this Virtual Router. If this object is disabled, the snmp server will not respond to any snmp requests and it won't send any traps.rw Enumeration .1.3.6.1.4.1.3085.3.1.9.1.1.1.1 |
csOrionSnmpCommTableThis table contains all the community strings recognized by the snmp server on this device. SEQUENCE OF CsOrionSnmpCommEntry .1.3.6.1.4.1.3085.3.1.9.1.2 |
csOrionSnmpCommEntryEach entry represents a single community string. CsOrionSnmpCommEntry .1.3.6.1.4.1.3085.3.1.9.1.2.1 |
csOrionSnmpCommStringThis object identifies one community string recognized by the snmp server on this device. DisplayString .1.3.6.1.4.1.3085.3.1.9.1.2.1.1 |
csOrionSnmpCommAddrThis object identifies the Ip Address of a manager allowed to use this community string. IpAddress .1.3.6.1.4.1.3085.3.1.9.1.2.1.2 |
csOrionSnmpCommPrivThis object indicates the privilege level of this community string. If the value of this object is readOnly(1), this snmp server will respond only to GET, GETNEXT, and GETBULK requests from snmp managers using this community string. If this value of this object is readWrite(2), this snmp server will respond to any requests from snmp managers using this community string.rw Enumeration .1.3.6.1.4.1.3085.3.1.9.1.2.1.3 |
csOrionSnmpCommRowStatusA row status type for the Snmp Community Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.9.1.2.1.4 |
csOrionSnmpAgentErrorTableThis table keeps track of the errors that happened when a NMS node tried to a SET operation. Since standard error codes returned by the SNMP response PDU was not comprehensive enough to indicate the actual problem, this table evolved. The NMS node has to keep the request-id field and the UDP port of the SET PDU that is being sent to the Orion SNMP agent. If the response-PDU corresponding to that SET returns an error, NMS node can browse this table with the saved request-id of the failed SET-PDU to get more information about the error. SEQUENCE OF CsOrionSnmpAgentErrorEntry .1.3.6.1.4.1.3085.3.1.9.1.3 |
csOrionSnmpAgentErrorEntryEach entry represent an error associated with a set operation by a management station. The Orion SNMP agent keeps track of the last 25 instances of such errors. Older entries give way for new entries. CsOrionSnmpAgentErrorEntry .1.3.6.1.4.1.3085.3.1.9.1.3.1 |
csOrionSnmpAgentErrorNmsIpAddressIP address of the management station which made an unsuccessful SET operation.ro IpAddress .1.3.6.1.4.1.3085.3.1.9.1.3.1.1 |
csOrionSnmpAgentErrorNmsPortThe UDP port of the SNMP SET request which resulted in an error.ro Integer32 .1.3.6.1.4.1.3085.3.1.9.1.3.1.2 |
csOrionSnmpAgentErrorNmsRequestIdThe requst-id field of the SNMP SET request which resulted in an error.ro Integer32 .1.3.6.1.4.1.3085.3.1.9.1.3.1.3 |
csOrionSnmpAgentErrorCodeThe error code set when the SNMP SET request resulted in an error.ro Integer32 .1.3.6.1.4.1.3085.3.1.9.1.3.1.4 |
csOrionSnmpAgentErrorMsgError message corresponding to the SET operation.ro DisplayString .1.3.6.1.4.1.3085.3.1.9.1.3.1.5 |
csOrionTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.9.2 |
csOrionSnmpTrapTableThis table controls the generation of traps by this Virtual Router. SEQUENCE OF CsOrionSnmpTrapEntry .1.3.6.1.4.1.3085.3.1.9.2.1 |
csOrionSnmpTrapEntryEach entry represents a single Virtual Router. CsOrionSnmpTrapEntry .1.3.6.1.4.1.3085.3.1.9.2.1.1 |
csOrionSnmpTrapStatusThis object is used to control the trap function for the snmp server on this device. If the value of this object is enable(1), the snmp server will send traps. If the value is disable(2), the snmp server will not send traps.rw Enumeration .1.3.6.1.4.1.3085.3.1.9.2.1.1.1 |
csOrionTrapReceiverTableThe trap receiver table (0 to 25 entries). This table lists the addresses of stations that should receive trap messages from this entity when an exception condition occurs. SEQUENCE OF CsOrionTrapReceiverEntry .1.3.6.1.4.1.3085.3.1.9.2.2 |
csOrionTrapReceiverEntryA trap receiver table entry. CsOrionTrapReceiverEntry .1.3.6.1.4.1.3085.3.1.9.2.2.1 |
csOrionTrapReceiverCommCommunity string used for trap messages to this trap receiver. DisplayString .1.3.6.1.4.1.3085.3.1.9.2.2.1.1 |
csOrionTrapReceiverAddrIP address for trap receiver. IpAddress .1.3.6.1.4.1.3085.3.1.9.2.2.1.2 |
csOrionTrapReceiverRowStatusA row status type for the Trap Receiver Table. This object is used to add or remove entries from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.9.2.2.1.3 |
csOrionTrapReceiverPortUDP port number for trap receiver. By default, all traps are sent to Port 162.rw Integer32 .1.3.6.1.4.1.3085.3.1.9.2.2.1.4 |
csOrionTrapReceiverTrapTypeThe trap type, which the Receiver wish to receive from this managed entity. By default, v2 inform request type is used to notify traps.rw Enumeration .1.3.6.1.4.1.3085.3.1.9.2.2.1.5 |
csOrionAcctInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.10 |
csOrionStaticConn OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.10.1 |
csOrionVpnAcctTableThis table contains composite stats for each of the VPNs in this Orion. SEQUENCE OF CsOrionVpnAcctEntry .1.3.6.1.4.1.3085.3.1.10.1.1 |
csOrionVpnAcctEntryEach entry contains composite stats for a single VPN. CsOrionVpnAcctEntry .1.3.6.1.4.1.3085.3.1.10.1.1.1 |
csOrionVpnAcctCompStatsComposite stats for this VPNro OCTET STRING .1.3.6.1.4.1.3085.3.1.10.1.1.1.1 |
csOrionVrAcctTableThis table contains composite stats for each of the VRs in this Orion. SEQUENCE OF CsOrionVrAcctEntry .1.3.6.1.4.1.3085.3.1.10.1.2 |
csOrionVrAcctEntryEach entry contains composite stats for a single VPN. CsOrionVrAcctEntry .1.3.6.1.4.1.3085.3.1.10.1.2.1 |
csOrionVrAcctCompStatsComposite stats for this VPNro OCTET STRING .1.3.6.1.4.1.3085.3.1.10.1.2.1.1 |
csOrionDynamicConn OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.10.2 |
csOrionRadiusAcctFlushThis object is used to flush the contents of the csOrionRadiusAcctTable. To flush the table, set the value of this object to 1.rw Enumeration .1.3.6.1.4.1.3085.3.1.10.2.1 |
csOrionRadiusAcctTableThis table contains composite stats for each of the VRs in this Orion. SEQUENCE OF CsOrionRadiusAcctEntry .1.3.6.1.4.1.3085.3.1.10.2.2 |
csOrionRadiusAcctEntryEach entry contains composite stats for a single VPN. CsOrionRadiusAcctEntry .1.3.6.1.4.1.3085.3.1.10.2.2.3 |
csOrionRadiusAcctIndexThe index of this radius accounting entry. The values will increase monotonically, even after the entries have been flushed. Integer32 .1.3.6.1.4.1.3085.3.1.10.2.2.3.1 |
csOrionRadiusAcctTimestampThe value of sysUpTime when this entry was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3085.3.1.10.2.2.3.2 |
csOrionRadiusAcctVpnIdThe Id of the VPN that originated this radius accounting entry.ro Integer32 .1.3.6.1.4.1.3085.3.1.10.2.2.3.3 |
csOrionRadiusAcctVrIdThe Id of the VR that originated this radius accounting entry.ro IpAddress .1.3.6.1.4.1.3085.3.1.10.2.2.3.4 |
csOrionRadiusAcctInfoInformation describing the creation or termination of a dynamic connection to a virtual router. The information is presented in standard radius accounting format.ro OCTET STRING .1.3.6.1.4.1.3085.3.1.10.2.2.3.5 |
csTelnetSvrInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.11 |
csTelnetSvrConfTableA table of telnet server configuration parameters. SEQUENCE OF CsTelnetSvrConfEntry .1.3.6.1.4.1.3085.3.1.11.1 |
csTelnetSvrConfEntryEach entry contains a set of configuration paramters for telnet server in a VR. Note, that only a single instance of telnet server is enabledat a time. CsTelnetSvrConfEntry .1.3.6.1.4.1.3085.3.1.11.1.1 |
csTelnetSvrConfAdminStatusEnable/Disable the use of telnet server.rw Enumeration .1.3.6.1.4.1.3085.3.1.11.1.1.1 |
csTelnetSvrConfTimeoutA user configurable telnet timeout value in minutes.rw Integer32 .1.3.6.1.4.1.3085.3.1.11.1.1.2 |
csTelnetSvrConfNumOfSessionsUser configurable number of simultaneous client sessions supported.rw Integer32 .1.3.6.1.4.1.3085.3.1.11.1.1.3 |
csTelnetConnTableTable lists all the currently active telnet connection. SEQUENCE OF CsTelnetConnEntry .1.3.6.1.4.1.3085.3.1.11.2 |
csTelnetConnEntryEach entry lists one currently active telnet connection. CsTelnetConnEntry .1.3.6.1.4.1.3085.3.1.11.2.1 |
csTelnetConnIdConnection Id of this particular telnet session. Integer32 .1.3.6.1.4.1.3085.3.1.11.2.1.1 |
csTelnetConnIpAddrThe remote peer's ip address of this telnet session.rw IpAddress .1.3.6.1.4.1.3085.3.1.11.2.1.2 |
csTelnetConnPortThe remote peer's port number of this telnet session.rw Integer32 .1.3.6.1.4.1.3085.3.1.11.2.1.3 |
csTelnetConnRowStatusThe admin status type for this entry in the connection table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.11.2.1.4 |
csOrionSyslogd OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.12 |
csOrionSyslogdTableThis table controls the activation of the syslogd client on a particular Virtual Router. Note, only one client can be enabled at a time. SEQUENCE OF CsOrionSyslogdEntry .1.3.6.1.4.1.3085.3.1.12.1 |
csOrionSyslogdEntryEach entry represents a single Virtual Router. CsOrionSyslogdEntry .1.3.6.1.4.1.3085.3.1.12.1.1 |
csOrionSyslogdStatusThis object is used to enable/disable the syslogd client on this Virtual Router. If this object is disabled, the syslogd client will not forward any ev_log messages to a syslogd server.rw Enumeration .1.3.6.1.4.1.3085.3.1.12.1.1.1 |
csOrionSyslogdReceiverAddrIP address for syslogd server.rw IpAddress .1.3.6.1.4.1.3085.3.1.12.1.1.2 |
csOrionSyslogdFacility1Mapping to Facility from Area 1rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.3 |
csOrionSyslogdFacility2Mapping to Facility from Area 2rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.4 |
csOrionSyslogdFacility3Mapping to Facility from Area 3rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.5 |
csOrionSyslogdFacility4Mapping to Facility from Area 4rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.6 |
csOrionSyslogdFacility5Mapping to Facility from Area 5rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.7 |
csOrionSyslogdFacility6Mapping to Facility from Area 6rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.8 |
csOrionSyslogdFacility7Mapping to Facility from Area 7rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.9 |
csOrionSyslogdFacility8Mapping to Facility from Area 8rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.10 |
csOrionSyslogdLevel1Mapping to syslogd Level from evlog level 1rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.11 |
csOrionSyslogdLevel2Mapping to syslogd Level from evlog level 2rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.12 |
csOrionSyslogdLevel3Mapping to syslogd Level from evlog level 3rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.13 |
csOrionSyslogdLevel4Mapping to syslogd Level from evlog level 4rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.14 |
csOrionSyslogdLevel5Mapping to syslogd Level from evlog level 5rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.15 |
csOrionSyslogdFacility9Mapping to Facility from Area 9rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.16 |
csOrionSyslogdFacility10Mapping to Facility from Area 10rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.17 |
csOrionSyslogdFacility11Mapping to Facility from Area 11rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.18 |
csOrionSyslogdFacility12Mapping to Facility from Area 12rw INTEGER .1.3.6.1.4.1.3085.3.1.12.1.1.19 |
csOrionHWNotifyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.13 |
csOrionFanEventA fan event.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.1 |
csOrionTemperatureEventA fan event. Note that the first four event types apply to analog temperature sensors (for example, those used to measure inlet and outlet air flow temperature), and the last two apply to digital temperature sensors (for example, those in the power supplies).ro Enumeration .1.3.6.1.4.1.3085.3.1.13.2 |
csOrionPowerSupplyEventA power supply event.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.3 |
csOrionFanSpeedThresholdThe fan speed threshold (in revolutions per second).ro INTEGER .1.3.6.1.4.1.3085.3.1.13.4 |
csOrionTemperatureSensorIndexIdentifies a particular temperature sensor.ro INTEGER .1.3.6.1.4.1.3085.3.1.13.5 |
csOrionTemperatureThe temperature reported by a temperature sensor.ro INTEGER .1.3.6.1.4.1.3085.3.1.13.6 |
csOrionTemperatureThresholdThe temperature threshold (in degress celsius).ro INTEGER .1.3.6.1.4.1.3085.3.1.13.7 |
csOrionPacketRingPrimToProtCurrentEndpointSlotCurrent slot number of the primary-to-protection endpoint.ro Integer32 .1.3.6.1.4.1.3085.3.1.13.8 |
csOrionPacketRingPrimToProtPreviousEndpointSlotPrevious slot number of the primary-to-protection endpoint.ro Integer32 .1.3.6.1.4.1.3085.3.1.13.9 |
csOrionPacketRingProtToPrimCurrentEndpointSlotCurrent slot number of the protection-to-primary endpoint.ro Integer32 .1.3.6.1.4.1.3085.3.1.13.10 |
csOrionPacketRingProtToPrimPreviousEndpointSlotPrevious slot number of the protection-to-primary endpoint.ro Integer32 .1.3.6.1.4.1.3085.3.1.13.11 |
csOrionTempAirFlowCardThe temperature/airflow sense card for which we are resporting an event. Note there is only one temperature/airflow sense card on 3500 chassis.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.12 |
csOrionI2CDeviceIdAn I2C device.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.13 |
csOrionI2CDevicePresentIndicates whether a given I2C device is present or not.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.14 |
csOrionPowerSupplyMonitorEventA power supply monitor event.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.15 |
csOrionTrapPowerSupplyIndexAn index for the power supply to be used in power supply trap.ro Integer32 .1.3.6.1.4.1.3085.3.1.13.16 |
cbrFileTypeThe kind of file that is being copied from master to standby control blade: bootcfg(1) - boot configuration file config(2) - configuration file password(3) - password filero Enumeration .1.3.6.1.4.1.3085.3.1.13.17 |
cbrFileNameName of the file that is being copied from master to standby control blade.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3085.3.1.13.18 |
cbrFileErrorTypeType of error that occurred during a file copy operation from master to standby control blade: cantOpenConfig(-6) - unable to open/create config file on standby control blade cantSaveConfig(-5) - unable to save config file on standby control blade cantChangeDirConfig(-4) - unable to change directory when updating config file on standby control blade cantWritePassword(-3) - unable to write into the password file on a standby control blade cantOpenPassword(-2) - unable to open/create password file on standby control blade cantChangeDirPassword(-1) - unable to change directory when updating password file on standby control blade savedBootcfg(1) - boot config file is saved successfully on standby control blade savedConfig(2) - configuration file is saved successfully on standby control blade savedPassword(3) - password file is saved successfully on standby control blade.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.19 |
cbrFileErrorCodepHILE+ error code associated with the file copy operation from master to standby control blade. Please consult the pSOS Manual for the possible values and the meanings of the error code.ro Integer32 .1.3.6.1.4.1.3085.3.1.13.20 |
csOrionBgpMaxPfxLimitEventIndicates the following events: maximum prefix limit reached exceeds maximum prefix exceeds maximum prefix limit - idling neighbor exceeds maximum prefix limit - discarding additional routes maximum prefix limit threshold reached.ro Enumeration .1.3.6.1.4.1.3085.3.1.13.21 |
csOrionStatusPanelInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3085.3.1.14 |
csOrionStatusPanelPortTableA table containing information about the Status Panel ports. SEQUENCE OF CsOrionStatusPanelPortEntry .1.3.6.1.4.1.3085.3.1.14.1 |
csOrionStatusPanelPortEntryAn entry containing management information applicable to a particular Status Panel port. CsOrionStatusPanelPortEntry .1.3.6.1.4.1.3085.3.1.14.1.1 |
csOrionStatusPanelPortIndexAn index for a Status Panel port. Integer32 .1.3.6.1.4.1.3085.3.1.14.1.1.1 |
csOrionStatusPanelPortBaudRateThe baud rate of a Status Panel port.rw SPPBaudRate .1.3.6.1.4.1.3085.3.1.14.1.1.2 |
csOrionStatusPanelPortLoopbackThe loopback state of a Status Panel port.rw SPPLoopbackStatus .1.3.6.1.4.1.3085.3.1.14.1.1.3 |
csOrionStatusPanelPortModemStatusWhether or not a modem is connect to this Status Panel port.ro SPPModemStatus .1.3.6.1.4.1.3085.3.1.14.1.1.4 |
csOrionStatusPanelPortRedundantStatus???? Ask Bev ????.ro SPPRedundantStatus .1.3.6.1.4.1.3085.3.1.14.1.1.5 |